Sync problems with 3gs and itunes after update iOS 5.0

I am using a Vista PC with iTunes10.5. After updating my 3gs to iOS 5.0 I am not able to sync the phone. iTunes recognizes my iphone and then stays syncing at the backup stage....I deleted all my apps on the phone and deleted previous backups and tried syncing again, but in vain. I am clueless....

I just plugged it into my netbook and its Restoring it on there so thanks, I know I will lose what I never had backed up but just be happy if it works. Fingers crossed this fixes it.
Edit: It didnt work, come up with iTunes isnt connected to the internet then the restore fails

Similar Messages

  • Problem with Facebook and instagram after istalling iOS 7.1. Can not open them!

    Problem with Facebook and instagram after istalling iOS 7.1. Can not open them!

    Hi Hanjon!
    Here is an article that will help you troubleshoot these purchased apps:
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    http://support.apple.com/kb/ts1702
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • Lenovo VIBE Z2 Pro problems with hearing and camera after updating to android Lolipop

    Hello All,
    After updating to Android Lolipop three days ago, on my phone occured some problems. 
    1. The hearing while calling/receiving a call is very low, when the volume is on max. It was extremly high on max volume before the update. 
    2. Now when I'm using the camera most of the pictures are captured with low quality and not well focused. Around one out of four pictures comes out with good quality and well focused. But I reviewed the settings and tried do switch them all the ways around but the problem still occurs. 
    Any help will be appreciated! Hopefully the next update will fix these issues.
    Regards,
    Sava

    gvdkolk wrote:
    Hello Guru,
    One question:
    Since I went to VIBEU_V2.0_1448_ST_K920_CMCC my phone is not connacting to the 3g network.
    Just edge. I refreshed apn restart the phone, no result.
    Is this a result of the update?
    Thanks in advance,
    Ger
    Hi Ger
    The Chinese K920 version is meant to be sold and used only in China with a certain local carrier/provider(That's why it's got the ''China Mobile'' logo on the back).The main difference between the Chinese and the international K920 version is the GSM receiver(hardware difference)....
    .....It seams there is a partial workaround(To make the Chinese version more ''internationally 3G/4G friendly'') but my experience with the Chinese K920 is limited and in this case it would be better to ask the actual users->
    Check out THIS THREAD .
    I can't help you much on this one....Sorry.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"! 
    Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Problem with printing and scanning after updating to Mavericks for my Photosmart C7180

    After updating my macbook pro (mid 2009) to Mavericks, I have found that I can only scan to a jpeg2000 and cannot scan as a tiff or jpeg or anyother format.  I have followed instructions on troubleshooting and have not been able to make anything work ie scanning from preview etc.  I have now uninstalled all the HP software and tried to load it again but software update will not recognise that I do not have the software for my printer.  What do I do now?

    Hello Cyd23, welcome to the forums!
    I understand you're having issues with scanning since you upgraded to Mavericks. I have looked into this concern for you and found that there is no downloadable driver with the full feature software (scanning software) included for the Photosmart C7180 and Mavericks.
    However, there are work around options for scanning that may help and work!
    Please see this link for the other methods: OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
    I hope that helps!
    Have a great day
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • I am facing problem with wifi and cellular after update  Apple iOS 8.0.2

    How can we resolve the issue with wifi and cellular reception after update the iOS 8.2 on iPhone 5s 32 GB

    Try some basic troubleshooting:
    (A) Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    (B) Try reset all settings
    Settings>General>Reset>Reset All Settings
    (C) Setup as new (data will be lost if you do not have backup)
    Settings>General>Reset>Erase all content and settings

  • Problem with Usernames and Workgroupmanager after update to 10.6.4

    After the update to SLS 10.6.4 i can´t delete Users in the Workgroupmanager. The login in the Wiki is also out of order: some Usernames will be accepted - some not: "Martin Fuermoos" will be rejected - only the shortname "martinfurmoos" is OK.
    ????

    I am having the same issue.
    The issue has effectively crippled our staff who depend heavily upon WIKI for SOP's and Core Business Processes.
    Key Symptoms:
    1. Some users can log in with 2nd short name; however, several users report that they can only login using their primary short name. --!! We use FirstnameLastname as primary and Firstname.Lastname as 2nd short name. All users are in the habit of using second short name. !! --
    2. Some users who can only login using primary shortname no longer have permission to access core work group wiki pages.

  • TS1398 I have problems with my wifi connection after update the ios6 any advice

    I have problems with my wifi connection after update the ios6 any advice

    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Problem with Rescue and Recovery after installing Norton Internet Security 2010

    Hi all.
    It's my first time in this forum.
    I have a problem, with Rescue and Recovery, after installing Norton Internet Security 2010 on my T43.
    The message I get it:
    "Rescue and Recovery is unable to back up the file 'C:\Documents and settings\all Users\Application Data\ Norton\ 00000082\00000109\000003c1\cltMLS1.bat' Because the file is either corrupted or being used by another application. Please close any application that could be using the file.
    I tried to close the Norton but I couldn't find how.
    Tanks
    Doron71

    Hi and welcome to the forum,
    the reason for this situation is, that the antivir files are protected from being modified.
    This is the reason, why this file cannot be backed up. I assume, that you would get much more such messages, as there are surelly multiple files files, that are protected like this.
    So the solution is to block folders from being archived. Please start RnR application and in the configuration set this folder as the excluded one.
    This will skip the backup of this file and will fix your situation.
    Please let me know, if you have covered this.
    Cheers

  • I have problems with my wifi connection after update the ios6 any advice

    I have problems with my wifi connection after update the ios6 any advice

    Ask your question in an iPAD forum.
    This is the OS X Mountain Lion forum.

  • I have a problem in the Bluetooth headset after updating iOS 7

    I have a problem in the Bluetooth headset after updating iOS 7

    Hi,
    have a similar problem here. More specifically, I am using a Plantronics Voyager Legend (brand new) with my Iphone5 (iOS 7.0.2). All apps are working great with the headset, e.g., listening to music, normal phone calls, etc. No sound distortion at all.
    When I use Skype (most recent version, which is 4.12.258) the sound is very distorted, like scattered. I also successfully used the same headset with a Samsung Galaxy S3 and Skype. No problems. So, I suspect that it must be the combination of Iphone/iOS7 and Skype which messes up the sound.
    Does anybody else have the same problem when using that combination of devices and apps?
    Best,
    Kurt

  • Lost all contacts and data after update iOS 7.1.2, how to recover all the data?

    lost all contacts and data after update iOS 7.1.2, how to recover all the data?
    it's very important to me...

    Restore from your last backup file.

  • Problem with podcasts and iTunes 6.0.1.3

    Hi everybody!
    First of all, please excuse my poor English: I'm French. I'll try to do my best to write as well as I can.
    I have some difficulties with podcasts and iTunes 6.0.1.3.
    When I "sign up" (FR: "s'abonner") to some podcasts, they are not updated in my iPod nano indeed (and some others are), although iTunes says: "Your iPod is updated" (FR: "Votre iPod est à jour").
    I have no way to put these podcasts episodes in my iPod...
    Could you help me please?
    Thanks in advance for your help!

    Hi iFriend,
    try this, it worked for me:
    1) first of all, uninstall QuickTime and older versions of iTunes from your PC, using the "remove" button in the "install applications" tool that you find in the windows control panel.
    2) reboot the system
    3) turn off the windows firewall application; go into the windows control panel, double click on windows firewall and disable the firewall option
    4) if you have one, disable your Anti-Virus application; i mean its real-time protection.
    5) probably it's not necessary, but for being sure... download and launch the standalone installer of QuickTime (latest version)
    6) download and launch the iTunes + QuickTime installer from this web address
    7) as an option, i suggest you to download and install also iTunes Art Importer. It's a nice application, that allows you to import from the internet directly into iTunes the album ArtWorks of the selected tracks in iTunes. I installed it, and it works very well with iTunes 6.
    8) after all the installations, remember to enable both firewall and anti-virus previously disabled!
    as i said, probably the 5th passage is not necessary, but i did it and it worked!
    if you have any questions or feedbacks, just relpy to this topic. stay iTuned!
    bye, bye,
    Marco

  • Problems with email and SMS after 1.3.5

    Let me first say that I love the Pre. Up until this point it has been perfect - I have a replacement, but that is because I dropped it (wrong angle, wrong location, broken screen). However, following the 1.3.5 update I'm now having a fairly important problem with email and sms - I can receive email and messages, but not send them.
    I have two email accounts. My personal account is with earthlink. My work account goes through an ISP using the domain name of my employer. I'm not using Microsoft Exchange or Outlook. I have tried deleting and reentering the accounts and that did not work. I can receive messages but get error messages when I try to send. 
    The same for messaging. I don't use it very often. But yesterday I get a text message  and tried to respond and got the error message.
    I power the phone off every night because I have a landline and use that as the primary phone at home.
    I have been looking around message boards trying to find a fix for this.  Has anyone had this issue and resolved it?
    Thank you.
    Post relates to: Pre p100eww (Sprint)
    Message Edited by starburst42 on 01-05-2010 07:06 AM
    This question was solved.
    View Solution.

    I forgot to add that this is a stock Pre. There are no patches or homebrew apps. 
    Edit:
    I found a fix for the email problem, in posts on precentral and this board from a few months ago. The info came up in a Google search, and not searches of the boards, which is kind of frustrating.  Here is the info, and the link.  I really wish Palm would put info about this work around on their site, or at least make it easy for people to find.  The solution is the last message in the thread linked below:
    Had the same problem.  Checked with Earthlink - no help.  Checked with Sprint - no help.  Checked with Palm - no help.  Here is what finally worked:
    Delete the earthlink account and start over.  When you do - this is the key - set up the account manually!  If you use the Pre defaults and try to change the settings it will not correct the problem. Your settings for outgoing mail must be:
    "smtpauth.earthlink.net"
    Use Authentication set to "on"
    username is your email address
    your email password
    port set to "587"
    encryption "none"
    Again, the key is to set up manually.
    smtp email fix
    Message Edited by starburst42 on 01-06-2010 12:08 PM
    Message Edited by starburst42 on 01-06-2010 12:09 PM

  • I cannot find my music bought on iTunes after update iOs 5; help me please. Thank's luce

    I cannot find my music bought in iTunes before update iOs 5; con you help me please? Thank's luciana

    It will only be where you put it.
    If for some reason you failed to transfer it to your computer from your iphone before updating, then it is gone, unless you live in one of the countries that allows redownloads:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Problems with Mail, Safari and iTunes after updating to 10.5.6

    Hi all,
    after installing 10.5.6 I have problems with Mail, Safari and iTunes.
    The time to open mails, websides and iTunes store is increasing dramatically since the update. If I open a webside parallel with Safari and Firefox, Safari needs minimum 15 times longer to open the complete side. Mails containing HTML-code also needs a long time to be opened. Tha same Problem with iTunes store. Connecting to the Store costs at least 30 - 40 seconds. And unfortunately for every iTunes store side I open. Its terrible
    Any idea or workaroung to solve that problem?
    Regards
    Michael

    First, run Disk Utility and repair permissions and then restart.
    I installed the 10.5.6 Combo update. Sometimes things get "lost in the translation" when you use Software Update depending on your installation. Perhaps you can download 10.5.6 Combo from the website and install it from your desktop.

Maybe you are looking for