Synching contacts with Outlook does not work

I have a Mac (with the contacts application), an iPhone and an iPad as well as an iCloud account. Synching contacts between all 4 of them works perfectly. However, synching contacts with Outlook 2011 does not work anymore. It used to, then I had some trouble with the synching with the iCloud (due to the fact that I had to change the Apple ID from the one I use for iTunes to the one I use for the Cloud), and since then contacts do not replicate with Outlook anymore. I can deactivate and reactivate the synching in Outlook as much as I want, no change.
Any ideas? Thanks!

So it sounds like you have contacts from multiple mail accounts syncing to/from your iPhone.  They will all appear there as long as their respective accounts are checked under contacts/groups(upper left of contact screen).
As far as contacts created on the iPhone, if you select Outlook as your default account for contacts, all contacts created on the iPhone will sync with Outlook.  I'm assuming your Outlook syncs with an Exchange Server.
You could connect the iPhone to iTunes and sync all of your contacts to say, a desktop version of Outlook.  You could then import that set of contacts into the Exchange version of Outlook.

Similar Messages

  • Can synch contacts with Outlook, but not calendar/todo list

    My Nano syncs fine with music, photos, and with Outlook's contacts The contacts page in itunes even lists my calendars, but when I synch they don't come across, and neither do my todo lists. Any suggestions?

    Hi - I was able to sync contacts and calendar, but not to-do lists, although there is an option on the nano itself for to-do lists - when I select it it tells me to "enable syncing from Itunes under the Calendar section of the contacts tab." There doesn't seem to be any option to enable this in the calendar section - I suspect maybe this was eliminated for the 3G?
    Anyway, one problem you may have in syncing from outlook is that there is too much data in your calendar and contact files. Try archiving your files in outlook first before syncing.(File/Archive) I got the "Itunes cannot sync" error message and this solved my problem.
    Good luck.

  • Syncing iphone contacts with iCloud does not work

    I navigate to my iPhone 4 Settings and from there chose the option which is named iCloud
    I turn OFF Contacts choosing to keep contacts on my iPhone and then turn it ON again.
    I get prompted with the option to Merge my iPhone contacts with the ones I have on the iCloud already. I  click "Merge".
    I wait until the iCloud service is turned on for my iPhone contacts.
    Finally, I go back to the Contacts app on my iPhone and click Groups, which is there I assume because I have multiple email accounts linked to my iPhone. I refresh my contact list by clicking on the circular arrow in the top left corner of the screen on the iPhone.
    Contacts I have recently added to my iPhone are NOT transferred to iCloud.
    Why is this not working?
    <Personal Information Edited by Host>

    Go on system preferences / iCloud and check if Calendar is turned on.
    Then take your iPhone 4 and go on Settings/iCloud and check if the Calendar is turned on.
    If both are on with the same Apple ID, it should all go fine.
    You can go on iCloud.com, logon with your Apple ID and click on the calendar to verify.

  • Serial number provided with download does not work, now what?

    serial number provided with download does not work, now what?

    Chrish29593217 you are welcome to contact our directly at Contact Customer Care.  What Adobe software title are you facing difficulties with?

  • HT4235 iPod nano 6th generation, syncing with audiobooks does not work now, had been working.  Sync test says:  No iPod touch, iPhone, or iPad found.  Connectivity test OK, no physical problems, iTunes shows the iPod.  Any clues what to do?

    iPod nano 6th generation, syncing with audiobooks does not work now, had been working.  Sync test says:  No iPod touch, iPhone, or iPad found.  Connectivity test OK, no physical problems, iTunes shows the iPod.  Any clues what to do?

    Hmm.. Thank you for the response.
    Have you tried using the iPod with another user account or computer, to help narrow down whether the problem lies with the computer, account, or the iPod itself?
    Maybe try reformatting it, using the tools provided by Windows. Instructions on how to reformat your iPod can be found in this article.
    http://www.methodshop.com/gadgets/ipodsupport/erase/index.shtml
    B-rock

  • Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work. Please help. Thanks.

    Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work. Please help. I am getting lots of spelling errors as the MacBook laptop screen is too small. Thank you so much! .

    Contentmom6 wrote:
    Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work.
    Normally, you just connect the monitor to the MacBook using a VGA adaptor that you can buy from an Apple Store.  Now try System Preferences > Displays > Detect Displays.  You should now be able to select a display mode for the monitor.  If it still doesn't work, then I'd check that everything is properly connected.  I've had problems with colours disappearing due to a faulty connection in the VGA adaptor.
    Bob

  • I am actually using a free trial of photoshop cc and the contact sheet option does not work-?

    i am actually using a free trial of photoshop cc and the contact sheet option does not work...

    Hi dmomoney24  ,
    Kindly refer : CC desktop lists applications as "Up to Date" when not installed.
    Please revert if the problem persists.
    Thanks,
    Atul Saini

  • Hello, all of a sudden I fell down my system and completely erased all bookmarks. Your progress with restoration does not work, send me ansver,please

    Hello, all of a sudden I fell down my system and completely erased all bookmarks. Your progress with restoration does not work, write me of bookmarks could not be loaded. Please advice on everything because I came and they seriously need it.

    Did your computer crash or did Firefox crash causing the loss of the bookmarks?
    You can check for problems with the places.sqlite database file in the Firefox Profile Folder.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
    See also:
    *http://kb.mozillazine.org/Lost_bookmarks
    *http://kb.mozillazine.org/Firefox_crashes
    *https://support.mozilla.org/kb/Firefox+crashes

  • Sync'ing contacts with Outlook no longer works

    Ipod Nano 4gb with latest iTunes 7.02.16. Problem was also present on previous version of iTunes.
    At one time, for a while after I bought my iPod nano, I could sync my Outlook contacts. It used to popup a message in Outlook asking for permission and I would say, yes, 10 minutes or whatever.
    Now iTunes just keeps saying "Cannot sync contacts with Outlook, try closing all instances of Outlook and restarting" but that suggestion does not solve the problem.
    Anybody know how to fix this?
    cheers,
    steve
    Dell D5150   Windows XP Pro   Pentium D

    You should probably post your question in the iTunes or iPod discussions

  • Sync with Itunes does not work

    Hi,
    I reinstalled latest Itunes completly but still sync with outlook 2007 does not work.
    Itunes says Sync finished, but nothing is synced.
    Here is the log:
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] ===================
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] iTunes.exe begins
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] ===================
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] "C:\Programme\iTunes\iTunes.exe"
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] ALLUSERSPROFILE=C:\Dokumente und Einstellungen\All Users
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] APPDATA=C:\Dokumente und Einstellungen\mispde\Anwendungsdaten
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] asl.log=Destination=file;OnFirstLog=command,environment
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] CIHOLOSCLI=C:\Programme\Seagate Software\Open Olap\
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] CLASSPATH=.;C:\Programme\Java\jre6\lib\ext\QTJava.zip
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] CommonProgramFiles=C:\Programme\Gemeinsame Dateien
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] COMPUTERNAME=MISPDE0
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] ComSpec=C:\WINDOWS\system32\cmd.exe
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] FPNO_HOSTCHECK=NO
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] HARVESTHOME=C:\Programme\CA\AllFusion Harvest Change Manager
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] HOME=C:\Programme\Computer Associates International, inc.\CCC Harvest
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] HOMEDRIVE=C:
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] HOMEPATH=\Dokumente und Einstellungen\mispde
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] LOCALHARVESTHOME=C:\Programme\CA\AllFusion Harvest Change Manager
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] LOGONSERVER=\\ERLCNDC1
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] NewEnvironment1=C:\Programme\Vodafone\Vodafone Mobile Connect\"Optimization Client"
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] NUMBEROFPROCESSORS=2
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] OS=Windows_NT
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] Path=C:\Programme\Gemeinsame Dateien\Apple\Apple Application Support\;C:\Programme\Gemeinsame Dateien\Microsoft Shared\Windows Live;C:\Programme\CA\SharedComponents\PEC\bin;C:\WINDOWS\system32;C:\WINDOWS;C: \WINDOWS\System32\Wbem;C:\Programme\Microsoft SQL Server\80\Tools\Binn\;C:\oracle\ora102\bin;L:\deployment files\runtime;L:\development\client;D:\FOUNDA~1\fnd301\deployment files\runtime;D:\FOUNDA~1\fnd301\development\client;C:\Programme\Samsung\Samsun g PC Studio 3\;C:\WINDOWS\system32\WindowsPowerShell\v1.0;C:\Programme\CA\AllFusion Harvest Change Manager;C:\Programme\QuickTime\QTSystem\;C:\Programme\Gemeinsame Dateien\Microsoft Shared\Windows Live
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.PSC1
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] PERL5LIB=C:\oracle\ora102\perl\lib\5.8.3\MSWin32-x86;C:\oracle\ora102\perl\lib\ 5.8.3;C:\oracle\ora102\perl\5.8.3\lib\MSWin32-x86-multi-thread;C:\oracle\ora102\ perl\site\5.8.3;C:\oracle\ora102\perl\site\5.8.3\lib;C:\oracle\ora102\sysman\adm in\scripts
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] PROCESSOR_ARCHITECTURE=x86
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 11, GenuineIntel
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] PROCESSOR_LEVEL=6
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] PROCESSOR_REVISION=0f0b
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] ProgramFiles=C:\Programme
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] QTJAVA=C:\Programme\Java\jre6\lib\ext\QTJava.zip
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] RTARCH=i86_w32
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] RTHOME=C:\Programme\CA\SharedComponents\PEC
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] SESSIONNAME=Console
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] SQLBASE=C:\Oracle\ora102\NETWORK\ADMIN
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] SystemDrive=C:
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] SystemRoot=C:\WINDOWS
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] TEMP=C:\DOKUME~1\mispde\LOKALE~1\Temp
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] TMP=C:\DOKUME~1\mispde\LOKALE~1\Temp
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] TNS_ADMIN=C:\Oracle\ora102\NETWORK\ADMIN
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] USERDNSDOMAIN=CORPNET.IFSWORLD.COM
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] USERDOMAIN=CORPNET
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] USERNAME=mispde
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] USERPROFILE=C:\Dokumente und Einstellungen\mispde
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] VS90COMNTOOLS=C:\Programme\Microsoft Visual Studio 9.0\Common7\Tools\
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] windir=C:\WINDOWS
    [3068 @ Wed Jun 09 10:45:52 2010] [(unknown facility) iTunes.exe] receive_message: Could not receive secure message: -1
    [3068 @ Wed Jun 09 10:45:52 2010] [(unknown facility) iTunes.exe] readthread: Could not receive message
    [7028 @ Wed Jun 09 10:47:00 2010] [_ISDVLog SyncServer.exe] Cancelling all sync plans.
    [7028 @ Wed Jun 09 10:47:00 2010] [_ISDVLog SyncServer.exe] Goodnight, Gracie.
    Please help me!

    *I just spoke with two different senior advisors from Apple one whose name was Matt and the other whose name was Zachary. They both were extremely rude and were not helpful at all. I explained the same exact scenario to them about how I just updated to iTunes 9.1.1 and that now my iPhone will not sync.*
    The ONLY help they could give me was to purchase a plan for either 29.99 or 69.99
    The reason no one from Apple will help us is because this company is based on greed. I am sure they knew about this bug that prevents thousands of users from syncing but I am also sure they assumed that we would pay the 29.99 or 69.99 for them to fix the problem. I honestly feel as though this is a scam to make more profit off of us.
    There is absolutely NOTHING they can do to help they said except for me to purchase one of those two plans they offer. My question is WHY THE **** SHOULD I PAY FOR SOMETHING THAT I AM NOT AT FAULT FOR? It should be there moral duty and responsibility to fix this bug yet because they know they will profit from it they have no intentions on doing so. The only thing I can really suggest is calling Apple and telling them how you feel. The more people who voice there opinions the better (just be prepared for them to tell you the ONLY thing they can do to fix the problem THEY created is by making YOU pay more money to fix it).
    I am extremely disappointed as a loyal Apple customer and this has seriously made me reconsider ever buying another Apple product.
    This company is morally and ethically wrong.

  • IPhonne stopped synching contacts with Outlook

    I had somehow synched my outlook contacts with the iPod. After that I deleted all my contacts from Outlook. Then, to take a backup of my iPhone contacts, I added just 1 dummy entry into my Outlook contacts. I am using the latest iTunes and also have updated the SW on the iPhone. I make all the right selections in iTunes to sync iPhone contacts with outlook. When I sync contacts are not synced. Neither the Outlook contacts nor the iPhone contacts are changed.
    All I want is to create a backup copy of my iPhone contacts. Is this an impossible task?
    Thanks,
    Bulent Dervisoglu

    It is now 2008 and I assume Apple decided to support the most popular versions of Outlook and I guess if Microslop didn't have significant changes between Outlook 2002 and 2003 - with 2003 released the very next year which is unusual and speaks volumes, Outlook 2002 would also be supported but I venture to say there is a reason.
    Nothing special or additional purchase is required with a Mac and rightfully so and I don't blame Apple one bit for not wasting resources to support every Outlook version or Windows version. The minimum system requirements and other requirements is published and easily available before making this purchase.
    I think Apple designers need to go for a training session @ Motorola. I had no backup issues with my Motorola Razr using the Motorola Phone Tools SW.
    And Motorola designers need to go for a training session or two @ Apple since the Motorola Phone Tools SW is Windows compatible only which I believe requires an additional purchase.
    Which Windows version are you running since there might be another option depending on your answer.
    Message was edited by: Allan Sampson

  • ORDS Template with parameter does not work

    Hello everybody,
    I can not get working a RESTful Service using the ORDS_SERVICES -API (ORDS version 3.0.0.343.07.58), same Query without parameter (hardcoded product_id) works fine.
    declare
    l_module_id number;
    l_template_id number;
    l_handler_id  number;
    l_parameter_id number;
    begin
    ORDS_SERVICES.delete_module(p_name => 'test_parameter');
    l_module_id := ORDS_SERVICES.create_module(p_name => 'test_parameter',
                                p_uri_prefix => '/test_parameter',
                                p_items_per_page => 10,
                                p_status => 'PUBLISHED',
                                p_comments => null);
    l_template_id := ORDS_SERVICES.add_template(p_module_id => l_module_id,
                               p_uri_template => '/demo_product_info_10/',
                               p_priority => 0,
                               p_etag_type => 'HASH',
                               p_etag_query => null,
                               p_comments => null);
    l_handler_id := ORDS_SERVICES.add_handler(p_template_id => l_template_id,
                               p_source_type => 'MEDIA', -- source_type IN ('COLLECTION_FEED', 'COLLECTION_ITEM', 'FEED', 'MEDIA', 'PLSQL', 'QUERY', 'QUERY_1_ROW')
             p_source => 'select mimetype, product_image from demo_product_info where product_id = 2',
             p_format => 'DEFAULT',
             p_method => 'GET',
             p_items_per_page => null,
             p_mimes_allowed => null,
             p_comments => null);
    /* now same result but with parameter */
    l_template_id := ORDS_SERVICES.add_template(p_module_id => l_module_id,
                               p_uri_template => '/demo_product_info/{product_id}',
                               p_priority => 0,
                               p_etag_type => 'HASH',
                               p_etag_query => null,
                               p_comments => null);
    l_handler_id := ORDS_SERVICES.add_handler(p_template_id => l_template_id,
                               p_source_type => 'MEDIA', -- source_type IN ('COLLECTION_FEED', 'COLLECTION_ITEM', 'FEED', 'MEDIA', 'PLSQL', 'QUERY', 'QUERY_1_ROW')
             p_source => 'select mimetype, product_image from demo_product_info where product_id = :product_id',
             p_format => 'DEFAULT',
             p_method => 'GET',
             p_items_per_page => null,
             p_mimes_allowed => null,
             p_comments => null);
    l_parameter_id := ORDS_SERVICES.add_parameter(p_handler_id => l_handler_id,
                               p_name =>  'product_id',
             p_bind_variable_name => 'product_id',
             p_source_type => 'URI',
             p_param_type => 'INT',
             p_access_method => 'IN',
             p_comments => null);
    commit;
    end;
    The first template works fine:
    http://localhost:8080/ords/xxx/test_parameter/demo_product_info_10/
    shows a jpeg image of a wallet.
    The second template does not work:
    http://localhost:8080/ords/xxx/test_parameter/demo_product_info/10/
    fails with error:
    mapped request using: BasePathMapper [basePath=/xxx/] to: SCHEMA:apex|XXX
    Choosing: oracle.dbtools.http.dispatch.DispatchMetaData as current candidate with score: MetaDataScore [score=0, matchedMethod=  GET: {10299, false}
      common: CommonMetaData [accepts=[], cors=null, documentation=null, frameOptions=null, pageSize=10, pagination=NONE, requiresPrivilege=null, transport=null]
    , matchedPattern= /test_parameter/demo_product_info/{product_id}
    common: CommonMetaData [accepts=[], cors=null, documentation=null, frameOptions=null, pageSize=null, pagination=null, requiresPrivilege=null, transport=null]
    methods:
      GET: {10299, false}
      common: CommonMetaData [accepts=[], cors=null, documentation=null, frameOptions=null, pageSize=10, pagination=NONE, requiresPrivilege=null, transport=null]
    stack trace:
    oracle.dbtools.http.errors.InternalServerException: java.lang.IllegalArgumentException: INT
    at oracle.dbtools.http.errors.ErrorPageFilter.internalError(ErrorPageFilter.java:165)
    at oracle.dbtools.http.errors.ErrorPageFilter.doFilter(ErrorPageFilter.java:113)
    at oracle.dbtools.http.filters.HttpFilter.doFilter(HttpFilter.java:44)
    at oracle.dbtools.http.filters.FilterChainImpl.doFilter(FilterChainImpl.java:51)
    at oracle.dbtools.http.cors.CORSFilter.doFilter(CORSFilter.java:35)
    at oracle.dbtools.http.filters.HttpFilter.doFilter(HttpFilter.java:44)
    I changed the add_parameter-call p_param_type => 'INT' to be  p_param_type => 'STRING'
    then error remains the same and strack trace says
    oracle.dbtools.http.errors.InternalServerException: java.lang.IllegalArgumentException: STRING
    at oracle.dbtools.http.errors.ErrorPageFilter.internalError(ErrorPageFilter.java:165)
    at oracle.dbtools.http.errors.ErrorPageFilter.doFilter(ErrorPageFilter.java:113)
    Could you please confirm and fix,
    kind regards,
    Tom

    This is a guess, but I suspect that ords_services.add_parameter() is not required at all.
    Also, your URL /demo_product_info/10/ should not have the trailing slash (according to your template URI).
    For more information, I suggest you look here:
    ords.3.0.0.343.07.58.zip\ords.war\scripts\migrate\core\ords_migrate.plb
    The migration package will show what is usually done for templates that already exist within APEX 4.2. I checked my templates and the ones with URI variables {in-curly-brackets} contain no records in apex_040200.wwv_flow_rt$parameters.
    -Kris

  • Save a published Access services database site as a template with contents does not work

    Hi
    I have a Access site on the SharePoint. I wanted the site to be duplicated to another subsite, I then did the usual - save site as a template with contents and made a copy of it, however it does not work. I have been getting the error as stated below
     error has occurred during report processing. (rsProcessingAborted)
    Query execution failed for dataset 'Default'. (rsErrorExecutingCommand)
    For more information about this error navigate to the report server on the local server machine, or enable remote errors
    However, it works if I make a local copy and publish it to the subsite? How does access services work on SharePoint and why the template option can't be chosen.

    Hi cally, check the following links for possible solutions:
    https://social.msdn.microsoft.com/Forums/sqlserver/en-US/1e2b77ba-4cfa-4aa3-97e4-b7b39fbd46fd/error-with-ssrs-report-that-has-a-sharepoint-list-data-connection-ssrs-r2-and-sharepoint-2010?forum=sqlreportingservices
    http://blog.mikehacker.net/2012/05/16/sharepoint-2010-access-services-reporting-with-sql-2012/
    cameron rautmann

  • Sending by mail an Invoice with VF02 does not work

    Hi guys,
    When using VF02 to send by mail an invoce form, the functional consultant is in trouble since it does not work. I am ABAP consultant, and before starting to debug the huge amount of lines of code behind this transaction, I think there might be a more straight solution. When setting the invoice number and entering this transaction, we accessed Goto->Header->Output. The output table to enter our fields appears. Here we set ZXXX as output type and External send like the Medium. When I press enter, the line is automatically filled with the rest of fields. Then we go to Further Data and choose the Send Immediatelly (when saving the application) option. Get back and press Save button. After it, a message "Please enter a communication strategy" is shown and the SD consultant told me that the correct option is MAIL (in fact, this option is part of the F4 help, with "email" as descriptive text) in the Communication strategy field. She told me it should be all to send a mail with the invoice. We did not fill the Logical destination nor checked "Print immediatelly" or "Release after output" checkboxes since they are not useful in this case. So when finally Save button is pressed, a message appears: " ", and then a dialog box appears with the following message: " Express document "Update was terminated" received from author "GILBERTO PARGA"". The mail received in my inbox is only a error message with title "Update was terminated" and the content is the following:
    Update was terminated
    System ID....   XXX
    Client.......   999
    User.....   SOMEBODY
    Transaction..   VF02
    Update key...   XXXXXXXXXXXXXXXXXXXXXX
    Generated....   12.05.2011, 20:37:27
    Completed....   12.05.2011, 20:37:27
    Error Info...   Output device not defined.
    The system is SAP ECC 6.0. Note that the message indicates no output device was defined, but since we are using email instead of print output, it does not matter. I have filled the field with the same result. I have read from Internet it could be a configuration trouble (the SD consultant checked it before, according herself) or even a Basis issue. Anyway, do you know the possible causes and possible solutions (like OSS Notes) for this trouble? The print output works fine, by the way.  Thank you all for your help.

    Hi,
    If you maintain method EXTERNAL SEND then in communication method you have to specify Communication strategy as CS01(Internet/letter)
    If you maintain method simple mail then in communication method you have to maintain RECIPIENT and RECIPIENT TYPE
    Also check the number range assignment for billing type for error "Update was terminated"
    you might be assigned numbers which are already consumed.
    kapil

  • IPad with Verizon does not work in Alaska.

    If you live in Alaska and considering an iPad with Verizon don't do it.  It does not work anywhere in Alaska.  I recently purchased an iPad while travelling in the lower 48.  The Apple sales people displayed the Verizon coverage map which displays wireless coverage for the populated parts of Alaska but what they missed is that you have to change the map to the Verizon Pre-Paid coverage and look for purple colored areas.  There are none for Alaska.  The map defaults to Extended 3G coverage in Alaska but that does not apply to the iPad.
    I was on the phone with one of their Pre-Paid support people and they confirmed no coverage for Alaska.  By the way, the Pre-Paid phone support is at 888-294-6830 but that number is not accessible from Alaska.  From Alaska you have to first call 800-922-0204, Option 6, ask to be transferred to the Pre-Paid support number.  Verizon - Alaska is a state of the USA!!!!
    So all I can do is use the thing via my home wireless network.  I cancelled the data plan and will need to turn it back on when I again travel south.  Looks like I should have stuck with AT&T.  At this point I have to return the iPad and get one specific to AT&T.
    DG

    So I finally figured out how to access my Verizon account on their web site.  There is actually a phone number associated with the account.  My iPhone is with AT&T so the Verizon iPad is my first experience with Verizon.  I looked for the plan you mentioned but don't see it.  Can you provide more detail?  What I currently have is what Verizon calls the "Prepaid Cellular Data" plan.  That gets me 1GB of data per month and it automatially renews each month billed to my credit card.  Is that the same?  If so then the Extended 3G network does ot work here in Alaska.

Maybe you are looking for

  • Accessing backed up contacts for two phones

    I have multiple phones on my account, but can access the backed up contacts only for one of the phones.  I read another thread that said you have to setup a separate account for each line to do this, but how can you setup a separate account for multi

  • MacBook Pro Battery "explosion"

    I pulled out my MacBook Pro from its backpack after a good month sitting unused under my desk.  The battery had "exploded" - and by that I mean that the casing had expanded, broken the seal and was coming apart.  When I removed it from the bottom of

  • Custom Subscreen in Service Master AC01 not invoked

    Defined custom subscreen(SAPLXBAS 8100) for service master AC01. User Exit is activated , however the line of code inthe main screen which calls the subscreen is not being called at runtime. Details are as follows ECC6.0 UserExit  : SRVASMD Calling s

  • CAN error with Channel API

    Hello All, Right now i am facing a CAN error when run my script which was developed using channel APIs. I am not able to trace out the the reason of the error. Pls find attached code and Error description. I have uploaded the sample code here and I a

  • Want to Save CS6 to CS5

    Hi, I have some files in Illustrator, Photoshop, and InDesign that I wish to be backwards compatible with CS5. I'm concerned more about my Illustrator files at the moment. I'm not sure how to save as a CS5 file or if there is an automatic way to make