Synchronization of tasks and interaction logs with Outlook doesn't work

Dear SAP Experts,
I'm workink on CRM 7.0 (release 7.7.06.010).
We are trying to make the synchronization of activities, contacts and tasks from our CRM system to Microsoft Outlook.
It's working fine for the contacts and for the Apointment BP visit (transaction type Y020).
But no synchronization made for others activities (interaction log Y007 and telephone calls PCAL) or BP Tasks (Y030) we created in the system.
We just applied today SAP Note 1415263 and Groupware Integration 3.057.
I made the settings in the CRM Calendar tab in Outlook (with synchronization from CRM to Outlook), and checked apointment, contacts and tasks.
In customizing (CRM > Transactions > Basic settings > Define transaction types), I flagged for the following transaction types the little 'Calendar' box: Y020, Y030, Y007 and PCAL.
In another entry (CRM > CRM Middleware and related components > Settings for client-based synchronization), I indicated the transaction type Y020 for DEFAULT_APPT_PROC_TYPE and Y030 for DEFAULT_TASK_PROC_TYPE.
Any idea about what is missing or not already done?
Any help will be apppreciated.
Thanks in advance for your help,
Kind regards,
Grégory KREMSER
Edited by: Grégory Kremser on Feb 3, 2010 3:13 PM

We don't have a CAS array set up. We want the fail over to be fully manual and only fail over to another server when mb1 is in a completely failed state and won't be back up and running withing a set time frame. We can get everything working
on MB3 and only Outlook doesn't work when everything is on MB2. Outlook also doesn't work if databases are on another server and DNS is pointing Outlook to MB2 (again MB3 works fine).

Similar Messages

Synchronize multiple tasks and multiple boards with X-series USB devices

Hi all,
I am trying to figure out how to synchronize multiple tasks across multiple X-series USB boards (6353, to be precise).
I have to run a digital output task AND an analog output task on each board. All four tasks (the DO and AO on Board 1, and the DO and AO on Board 2) must be synchronized.
I know how to synchronize multiple tasks on a single board. I've been doing that for years. That works fine.
I know how to synchronize a single task across multiple boards (say, a DO task across 2 different boards). That works fine too.
For the life of me, I can't figure out how to marry the two. Everything I've seen, all of the examples, etc. assume you want to do one or the other, or that you have a RTSI cable available. Are there any examples out there that synchronize multiple tasks across multiple USB boards?
I tried exporting the AO clock signal from my master AO task to PFI12, and then using the signal on PFI12 to as the clock source for the remaining tasks (Dev1/PFI12 physically connected to Dev2/PFI12, and Dev1/PFI12 set as the clock source for Dev1's DO task).
I have also tried setting Dev1/aoSampClock as the source for Dev1's DO task.
Under both configurations, I invariably get error -89137 when I try to start the tasks -- required resources (PFI12) in use by Dev1/do/SampClock. I understand what the error is telling me. What I don't understand is why I'm receiving this error when I don't have any of my tasks configured to use the DO Sample Clock. It seems as though it is not possible to export a clock signal to a PFI line and simultaneously run a clocked digital task, even if the clock source for that task is specified as something other than the DO Sample Clock?
So, my question is, is it possible to do what I want to do? And if so, how do I do it? How do I configure a common clock source across multiple tasks running on multiple USB boards?
Hoping for insight from those wiser than I...
Diane
Solved!
Go to Solution.

Update: I decided to try using a counter as the source clock. One cannot use counter 0 to accomplish this, but it does appear to work with counter 1.
I'll take what I can get. Fortunately I have two spare counters. (Yes, I'm running counter tasks too -- 6 of them -- but they don't have to be synchronized.)
I have to add both digital and analog input tasks as well -- all synchronous with each other, but not with the output tasks since they'll be running at different sample rates. I hope I'm able to use a counter as the source clock for those as well.
My head aches.

My nano cannot be formatted and says restore with iTunes - doesn't work

Hi,
I have a number of problems with the new nano.
It worked fine until I updated it (which I never did in the beginning). I formatted it like suggested here with the HP USB... and is was perfectly fine. I reset it like suggested, but when I plugged it in again to load the music from iTunes, it didn't show up.
The ipod showed in my computer so I formatted it there again as also suggested here, but it couldn't finish formatting and since then all I get is a screen that says 'restore ipod in itunes' in four languages.
Unfortunately I can't see it in itunes so I can't restore it, I can't show it in My computer, because it says that the device is not formatted.
I re-installed all the software a couple of times, but nothing works. The updated cannot see the ipod or says: this ipod is not covered by this software...
I am absolutly desperate, especially as I sit here in Germany, but the ipod was purchased in the US, so no way of bringing it back to the store quickly.
Any advice someone?
It is highly appreciated...

Here are the instructions when your iPod shows up in windows, but not in iTunes.
http://docs.info.apple.com/article.html?artnum=93716

Mail after interaction log with copied attachment

Hello experts!
I want to create a mail out of an interaction log with copied attachments.
This means:
1) I create an interaction log and add an attachment to it
2) I select "more" "send mail"
3) I want this mail to have the same attachment as the interaction log
Does anybody know how to solve this?
Greetings,
littlesam
EDIT: Right know I'm trying it with customizing, I created a BAPI, but I have no idea how to copy the attachments?
Edited by: littlesam on Apr 15, 2010 1:47 PM

Does anyone have a suggestion here?

Contacts and calendar dont sync with outlook 2013 (win8) - working with IPhone 5S and Ipad air

Dear all,
i just moved to a new PC (former: Sony Vaio pro with win 7 pro, outlook 10 > new: sony vaio duo with win 8, outlook 13 from office 365 home). i used to sync outlook contacts and calendars with blackberry and iphone and ipad on my old notebook using desktop manager from blackberry.
Now with my new PC, ipad and iphone are still working fine and they sync with outlook: new entries on outlook calendar and new contacts are added to my mobile and vice versa but when i connect my Blackberry Bold i don get any of the updates.
i confirm that i am using the latest version of the desktop manager 7.0.
my desktop manager organizer is set up to sync both ways for both calendar and contacts
Any idea please?
thank you in advance for your help
MC
Solved!
Go to Solution.

Hi and Welcome to the Community!
Unfortunately, you have moved beyond the supported platforms...refer:
http://us.blackberry.com/software/desktop/desktop-pc/system-requirements.html
Outlook 2013 is not supported at this time.
Sorry.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Issues syncing iPhone 5 and iPad mini with outlook calendars

I am having issues syncing my iPhone 5 and iPad mini with Outlook calendar. This is a new problem since I upgraded to IOS 7. I am now using ios 7.0.2. I have removed air sync for calendars and that has not resolved the issue. Nothing new on my calendar is syncing to my phone or ipad. Any suggestions?

To use AirPlay, you need these:
iPhone 4 (or later), iPad, iPad mini, or iPod touch (4th generation or later)
For videos or photos: Apple TV (2nd or 3rd generation)
For music: Apple TV (2nd or 3rd generation), AirPort Express, or AirPlay-enabled speakers or receivers

I want to synchronize 2 macbooks and 2 iphone4s with only one database

I want to synchronize 2 macbooks and 2 iphone4s with only one itunes music database, kalender, contact and so on. I use only one itunes account. All devices shall have the same informations (for the iphones available).
Do I have to bring all informations on an external harddisk?

No, use the same AppleID/iCloud account on all 4 devices and it should bring all that into sync for the most part.

Exchange Failover - Outlook Doesn't Work with 1 Server

Hi,
Wondering if someone could help.
We have 3 Exchange 2010 servers with all roles installed. All at SP3 RU6. DAG set up between all 3 servers for all mailbox databases. Manual failover is enabled. MB1 holds all copies. Outlook 2010 with all latest updates being
used by end clients.
MB1 - Main Physical Server – All Active Copies – No Issues
MB2 – Secondary Physical server – Passive – Problem Server
MB3 – VM for use in the worst case scenario – Passive – No issues
We simulated MB1 failing. We can get MB2 to take ownership of the databases manually. OWA works fine, mail flow works fine but whenever we open Outlook it either fails to connect and continues to say “Server is unavailable, Retry, Work Offline,
Cancel” or the inbox loads but it loads old mail from a month+ ago (I actually this this may be a cached mode setting that’s being taken from somewhere even though cached mode is disabled) and sits at “Offline”. If I do the “Test E-mail Auto configuration”
then everything passes fine but we can’t get the client to go online at all.
If I fail everything over to MB3 then it all connects up ok and works fine. I stuck MB1 back online with mailboxes being active on MB2 and Outlook pointing to MB1 and it works fine. The only thing that appears to be broken is when Outlook points
to MB2 only.
Thanks

We don't have a CAS array set up. We want the fail over to be fully manual and only fail over to another server when mb1 is in a completely failed state and won't be back up and running withing a set time frame. We can get everything working
on MB3 and only Outlook doesn't work when everything is on MB2. Outlook also doesn't work if databases are on another server and DNS is pointing Outlook to MB2 (again MB3 works fine).

After formatting iPod to NTFS and restoring back with iTunes, the player works for two-three weeks and crashes afterward. It then requests to restore it through iTunes.

After reformatting iPod to NTFS and restoring back with iTunes, the player works for two-three weeks and crashes afterward. It then requests to restore it through iTunes. When connected to iTunes, it sees it in the restore mode and also asks to restore the iPod. It happens over and over for the last months. What could be the problem?
iPod Classic 80Gig.
Thanks in advance.

Dear planb77
Thanks for a reply. iPod does not support ntfs - you're right. that means it will never work on that. While restoring ipod using iTunes, itunes reformats it no matter what filesystem is there. So the issue is not that. ipod is now on fat32 and it works for a certain period of time, but then crashes and asks to restore through itunes. Resetting/restarting does not help.

My wife has an NOKIA E71 and she syncs with iSync. Everything works well, but when she adds a meeting on her phone, it does appear on the computer after syncing. Anyone? We have an iMac 24" with the latest MAC OS.

My wife has an NOKIA E71 and she syncs with iSync. Everything works well, but when she adds a meeting on her phone, it does appear on the computer after syncing. Anyone?
We have an iMac 24" with the latest MAC OS.

Hello Kerrigaj,
After a re-install of OS X 10.5.8 uninstalled the E71 in iSync and moved it out of the bluetooth-device list first and completely re-installed it using the bluetooth manager (SystemPreferences/Hardware).
No extra thirdparty-software involved and ever since no problems.
Goodluck - hope it works for you.
(MDD 1Ghz DP/2Ghz/OS X 10.5.8 + E71)
Message Edited by nicle on 28-Aug-2009 07:23 PM
Message Edited by nicle on 28-Aug-2009 07:24 PM

I have an Iphone 3GS and the app for Facebook doesn't work anymore...

I have an Iphone 3GS and the app for Facebook doesn't work anymore since last update made yesterday.
How can I restore it without the last update?
Or, what can I do to have the Facebook back again on my mobile?
Thank you for your help.

Hi Ricoco,
I too had exact issue what you were experienced, then I went to Apple autorised service center and submitted my earpods, their it worked with all versions of Apple iphones, but it didn't worked on my 3gs. The service technician suggested for OS upgrade.Then I came home and I took the backup and upgraded 5.1 to 6.1 as he suggested, also it didn't worked. I was totally frustated and suddenly I got an idea!. What a funny thing here is, a safety pin resolved my issue, I took out all dust which was there in the jack hole. Then I check my earpods, it was amazing you know..MY EAR PODS WORKED!.
If you still have this issue, I hope this will help you.
Umesh

I accidently "x" off the download of firefox 4 before it had finished and now the home page doesn't work, i tried redownloading firefox but that didn't work is there a way i can resume the download?

I accidently "x" off the download of firefox 4 before it had finished and now the home page doesn't work. it loads but then wont let me search from it? i tried redownloading firefox but that didn't work is there a way i can resume the previous download?

Your More system details list show that you run the latest Firefox 4.0.1 version.<br />
You can check that via Help > About Firefox and on the Help > Troubleshooting Information page.
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* https://support.mozilla.com/kb/Server+not+found
* https://support.mozilla.com/kb/Firewalls
If you posted from another computer then download the full version and uninstall the currently installed version.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

I just updated to 7.1 on my 5S and now my finger print doesn't work. Anyone else have that problem?

I just updated to 7.1 on my 5S and now my finger print doesn't work. Anyone else have this problem?

Hey Carol5005,
Thanks for the question. I understand you are experiencing issues with Touch ID. The following article provides some troubleshooting steps that may be helpful:
iPhone 5s: Using Touch ID
http://support.apple.com/kb/HT5883
Resolving issues with Touch ID
1. Verify that you are using the latest version of iOS.
2. Ensure that your fingers and the Home button are clean and dry.*
Note: Cover the Home button completely. Don't tap too quickly, don't press down hard, and don't move your finger while Touch ID is scanning. Make sure that your finger touches the metal ring around the Home button.
3. If you are using a protective case or screen protector, it must leave the Home button and the surrounding ring completely unobscured. If it doesn't, remove the case or screen protector and try again.
4. Tap Settings > Touch ID & Passcode and verify that:
- iPhone Unlock or iTunes & App Store is enabled.
- One or more fingerprints have been enrolled.
5. If one finger isn't working, tap Edit in Settings > Touch ID & Passcode to delete and then reenroll the finger.
6. If that finger still isn't working, try enrolling a different finger.
7. If you are unable to enroll any of your fingers, take your iPhone 5s to an Apple Retail Store, Apple Authorized Service Provider, or contact AppleCare for further assistance.
* Moisture, lotions, sweat, oils, cuts, or dry skin may affect fingerprint recognition. Certain activities can also temporarily affect fingerprint recognition, including exercising, showering, swimming, cooking, or other conditions or changes that affect your fingerprint.
Thanks,
Matt M.

I just installed Maverick to my imacG5 and now my Office 2004 doesn't work??

I just installed Maverick to my imacG5 and now my Office 2004 doesn't work?? Where do I go from here??
Thanks.

You have given us inaccurate info about your iMac.
The G5 iMac is all white and runs a IBM Power PC (non-Intel) CPU that cannot run any OS X version above OS X 10.5.8.
OS X 10.6- 10.9 all run on much newer Intel CPU iMacs that have aluminum enclosures.
Typically, mid-2007 models and later.
The iMac model you described can't possibly run OS X 10.9 Mavericks.
Please download, install and run Etrecheck.
Etrecheck is a small, unobstrusive app that compiles a snapshot of your entire Mac hardware system and all installed software.
http://www.etresoft.com/etrecheck
Copy/paste and post its report here in another reply thread so that we have a complete profile of your Mac's hardware and installed software so we have accurate information about IMac to help both you and us begin to troubleshoot and solve the performance and technical issues with your Mac running OS X 10.9 Mavericks.
Thank You.

How do I disable those pesky "hover-over" pop ups? I tried the method of right clicking on them and opting out, but it doesn't work. If you guys could add some kind of blocker to your browser, it would be a huge plus!

# Question
How do I disable those pesky "hover-over" pop ups? I tried the method of right clicking on them and opting out, but it doesn't work. If you guys could add some kind of blocker to your browser, it would be a huge plus!

Chris CA wrote:
Did you createa smart playlist? It's purple with a gear icon.
And you set the criteria to
Match rule:
Date added is in the last two weeks?
I tried it, but couldn't get it to work. I think I had trouble with the Rule. I put a Rule in as follows: Data added in the last five hours? I added music (data) but nothing appeared in my Smart Playlist. Oh yes - I named the playlist: Recently Added.
What did I do wrong? Is it necessary to have a question mark at the end of the Rule? I couldn't find anything on how to create a Smart Playlist in Help. There is stuff in there, but it does not go into much detail, i.e., nothing on the proper wording of the Rule.

Synchronization of tasks and interaction logs with Outlook doesn't work

Similar Messages

Maybe you are looking for