Synchronize Material Status and Distribution Status
As we have assigned (in our concept) one distribution status to one material status, we want to ease the maintenance for the users so that they only have to set the material status. The distribution status should then be adapted automatically (for both cross-plant and plant-specific status).
My idea was to create a report which maybe runs nightly and sets the distribution status according to the material status.
Has anyone made experience with that and give me some hints on how to do that well?
Thanks for your contribution!
Hi Mohan,
I am talking about the material master. You can set both status there. What I want to have is that
-x-plant material status is always equal to x-plant distribution status
--> MARA-MSTAE is always written to MARA-MSTAV
-plant-specific material status is always equal to plant-specific distribution status
--> MARC-MMSTA is always written to MVKE-VMSTA
Best regards
Martin
Similar Messages
-
Dear friends
There are some Materials which are not showing Picking Status and WM Status, for which these Materials are not being fetched in the TO (Pick List) from the corresponding Outbound Deliv. Doc. How can I overcome the situation?
Kindly advise
Thanx in advance
Regards
SBhi,
check in the item category of this material if it is picking relevant or not. Only if it is picking relevant, the WM comes into play.
You can go to t.code " OVLP " and check for the item category if its picking relevant.
Pl reward if it helps.
Thanks
Sadhu Kishore -
How to get system status and user status of service order
Hi,
I want to show user status and system status for service order in my report and i am using CRM_ORDER_READ function module to read the status, but it is returning lot of status records, could anyone please suggest how to get the system status and user status for service order.
I did not find any clue for how to get user status, i can see the user status when i open the transaction using CRMD_ORDER.
Regards,
Kamesh BathlaHi,
Go to CRM_JEST table give your service order guid and get the status, pass this status into TJ02. You will get the status of your order.
Regards
Srinu -
Packing status and delivery status
What are the fields for packing status and delivery status?
Hi,
Please check tables VBUK (header status) and VBUP (item status).
VBUK-LFSTK ((Delivery status)
VBUK-PKSTK (Overall packing status of all items)
VBUP-LFSTA (Delivery status)
VBUP-PKSTA (Packing status of item)
Regards,
Ferry Lianto -
Fetching the sales order data using both system status and user status
Hi,
Could any one tell me how to fetch sales orders using both system status and user status.
My requirement is to fetch sales order data in a report where the user enters the system status and user status in the selection screen fields.
For example i need sales orders where the system status is I1002 i.e. OPEN and user status is E0002 (status profile CMSCON0) that is In Process
Early replies are appreciated.
Thanks
TanveerHi,
The system status and user status are stored in CRM_JCDS & CRM_JEST tables you can get the all the order GUID on particular status further pass the order GUID in table CRMD_ORDERADM_H to get transaction ID.
Regards,
Dipesh. -
Need a report on delivery status and response status for capaign recipients
hi, i need to make a report on delivery status and response status for capaign recipients but cannot find them in the campaign subject area nor the campaign response subject area, any idea?
thanksCorrect the Campaign Response History is the report you are looking for. The fields that may be helpful to you are.
Response status - This shows message opened, click-thru's, opt outs etc
Delivery status - Hard bounce, soft bounce etc
To get more details from the above results add the following.
Response type - This will show the URL that was clicked on a click-thru in case you have multiple links tracked in one email. It will also show the reason for hard bounces. This is important because not all hard bounces will trigger the "Never Email" flag to be checked. This occurs for emails with the bounce statuses of Bad Address,
Address Moved or Unknown Address only. -
System status and user status Priority
Hi All,
We have system status and user status for the production order, I would like to know which has higher priority.
E.g In system status some business activity are not allowed but at the same time for user status those activites are active, then which status has high priority.
Regards,
RanjanHi,
As per my understanding both the status work together. If User status forbids a business transaction and system status allows it, then also the business transaction cannot be carried out.
Also if system status forbids a business txn and user status allows that, then also you wont be able to carry out the txn.
Both work with "AND" condition.
Regards,
Rohit.
Added: you can try it by creating a User status profile. Allow Goods Movement to CRTD status. Now dont release the production order, only save it. Then try issuing goods (261), the system will block you.
Now, other way round, forbid GR without confirmation. Though System Status allows GR without CNF or PCNF status, but the user status will forbid the transaction.
Hope the example helps.
Regards,
Edited by: Rohit Chauhan on Jun 5, 2009 9:09 AM -
System status and user status in Line Item Reports
Dear PS-friends,
I have to extend the CI CI_PROJ with some new fields. These fields should be shown in diverse Line Item Reports (CJI3 u2026).
I know how to get these customer fields into the field catalog for the reports (maintain include table CI_RKPOS, EXIT_SAPLKAEP_001 and ViewCluster V_TKALV).
Now our customer wishes that 2 of the new fields are: system status and user status. The status should be shown in CJI3 as a concatenated field as you see it in CJ20N.
In CN42 there is the column system status as a standard column. But I cannot find the structure CNJ_STAT included in V_TKALV for Line Item Report Object=PD.
Has anybody an idea how it works to show the system status and user status in Line Item Reports.
Thanks in advance!Problem is solved.
I wrote a function module using FM 'STATUS_TEXT_EDIT' and concatenated line and user_line. -
How to get system status and user status ?
how to get system status and user status for the given production order?
In which PP table we can
find these?
Thanks&Regards
SatishHi Ram,
Use the FM "STATUS_READ" to read both the system and user statuses for an Order.
Alternatively, the following tables store the user and system status info:
JSTO- Status object information
JEST- Individual Object Status
Hope this helps.
Let me know if u need further information.
Regards,
Sonal -
How to fetch service order with partucular system status and user status
Hello All,
How to fetch service orders with specific system status and user status.
thanksI want tables or views from where I can fetch service orders. I have to design ALV report based on this.
I want to fetch released service orders with status INIT and RENT.
Here, SYSTEM Status = Released and
USER Status = INIT
RENT
So is there any function module available for the same..... -
IO system status and user status
Hi all,
Could you please tell me where the link between IO sys and user status.
Thank you.Hi
System status and User status:
System Status
o The system sets a system status informing the user that the system has executed a certain business transaction for an object.
o You can only influence this status by executing a business transaction that changes the system status.
o If you release an internal order, the system automatically sets the Released system status.
User Status
o You can set a user status in addition to the existing system status.
o You specify the user status in a status profile, which you create for each order type in Customizing.
o You can specify and activate any number of user statuses.
o In a production order you can simultaneously
The system status and the user status influence the business transactions in the same way.
The status profile allows you to:
o Define the user status and document its functions with a corresponding long text.
o Assign a status number that specifies the order in which the system reaches the user statuses.
o Define an initial status, which is then automatically set when an object is created.
o Determine that a user status is automatically set when you execute a business transaction.
o Permit or forbid specified transactions, if a status is active.
VVR -
The difference between the QM status and total status of a request?
Hi Experts,
I have some confusion about the concept of the status of a request. In the data target management window, we have QM status and technical status of a request, and in the monitor, we have total status of the request. Can somebody tell me the difference between the three. Please give me some detailed info about this or provide me some document regarding this. your great help will be highly appreciated.
EileenQM status can be edited..but technical status cannot be edited..
in the monitor..only total status can be edited..
please see this link..gives the required info..
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a663ce07211d2acb80000e829fbfe/frameset.htm
Vishvesh -
Difference between system status and user status.
Can someone explain to me the difference between system status and user status in details
Hi,
As you mentioned there are 2 status can be maintained for documents like Equipment Master, Notification, Maintenance Order & other important business documents.
In case, client feels that system status is not enough to capture the details of the object, then user status can be used.
System statuses will be updated automatically based on business transactions which will be done on SAP.
For example, once the equipment is created, System status would CRTD (Created). If you install the same to some superior equipment or FL, then status would be INST (Installed).
If you keeping that equipment in Spare, then for that, you have to maintain separate User Status like AVLB (Available in Stock / Spare) so that through IH08, by using User status, you can the report which is available as spare.
These user status as per the name, should be updated by the user manually.
Regards,
Maheswaran. -
WCS difference between "admin status" and "oper status"
Can anyone explain what the difference is between admin status and oper status within the WCS GUI. It appears that disbaling either on effectively disables the radio...is that correct?
I think I got it figured out...thanks for lookin....
-
EQUIPEMENT - User status and system status
Hi freind,
It would be great help if someone can brief me on procedure / bapi or function module availability for USER STATUS and SYSTEM STATUS update to equipement.
regards
Pravinhi Pravin,
Check this out
<b>USER STATUS</b>
http://help.sap.com/saphelp_erp2005/helpdata/en/56/254c40cc538437e10000000a155106/frameset.htm
<b>SYSTEM STATUS</b>
http://help.sap.com/saphelp_erp2005/helpdata/en/bd/7924da4d0d9043b426fc081669f27a/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/9f/972f72ec2a40479d2a7dec4500a4f2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/68/ebac18beabc34b90d4c1949a66dece/frameset.htm
<b>USER STATUS</b>/<b>SYSTEM STATUS</b>
http://help.sap.com/saphelp_erp2005/helpdata/en/89/a432ff461e11d182b50000e829fbfe/frameset.htm
Regards,
Santosh
Maybe you are looking for
-
1st Gen Shuffle not charging, recognized by Windows or iTunes
Hi, Got an iPod Shuffle (1st Gen, 512mb) from a friend the other day. He'd owned it for less than a year and had bought an iPod video, which is why he gave the shuffle to me. It was working great. Windows recognized it. iTunes recognized it. Moved my
-
Connect Sony TV via HDMI / Thunderbolt to my Mac Air no sound :(
Hi all, I am new to this "mac world" ....and I'm trying to see videos on my Sony TV from my Mac Air, for that purpose I've bought a Thunderbolt / HDMI Encore electronics adapter. (There's a picture below....) Everything goes well, apart from the issu
-
Error attempting to process incomplete inbound FTP file
We are currently receiving some large files into PI via FTP. Here is the communication channel definition: Adapter Type: File Transport Protocol: File System (NFS) Message Protocol: File Adapter Engine: Integration Server Poll Interval (secs):
-
Ask that I could purchase through Visa Saudi Arabia and ship my purchases to my address in America
Ask that I could purchase through Visa Saudi Arabia and ship my purchases to my address in America
-
Airport Extreme USB disk password issue fix ETA?
Many people who have a USB drive connected to their Airport Extreme 802.11n have had problems where it repeatedly asks for the password to connect to the USB disk, but never allows you access until you reboot the router. This has been an issue for so