Synchronizing Microsoft Excel 2010 with Sharepoint 3.0

We would like to synchronize calendar entries from MS Excel 2010 (64-bit) to SharePoint 3.0, so that every time a change is made in Excel, it automatically syncs in SharePoint 3.0. We have already installed
an add-in (Excel 2007 Add-in: Synchronizing Tables with SharePoint Lists) that was supposed to help the synchronization of Excel to SharePoint, but it did not work. ANY IDEAS?

ootb, changes in excel don't sync with a SharePoint list, the other way around is possible.
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

Similar Messages

The goal is to synchronize an excel sheet using Microsoft Excel 2010 with Sharepoint 3.0

The goal is to synchronize an excel sheet using Microsoft Excel 2010 with Sharepoint 3.0. We have already installed an add-in (Excel 2007 Add-in: Synchronizing Tables with SharePoint Lists) that was supposed
to help the synchronization of excel to Sharepoint, but it did not work. We would like to synchronize information about a calendar from excel to Sharepoint 3.0, so every time a change is made in excel it automatically updates in Sharepoint.

ootb, changes in excel don't sync with a SharePoint list, the other way around is possible.
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

Using Excel 2010 with SharePoint 2013 Excel services

Hello:
What features are we missing when using Excel 2010 (rather than Excel 2013) with SharePoint 2013 Excel services?
Regards
Jeff Gorvits

Hi Jeff,
You might want to read the articles below:
https://support.office.com/en-us/article/Whats-new-in-Power-View-in-Excel-2013-and-in-SharePoint-Server-8e3b4259-421e-41fc-a48e-854388ad14d0?ui=en-US&rs=en-US&ad=US
https://support.office.com/en-us/article/Version-compatibility-between-Power-Pivot-Data-Models-in-Excel-2010-and-Excel-2013-188f44fd-3cfd-4aa7-b4e6-a9402653cbf3?ui=en-US&rs=en-US&ad=US
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Microsoft excel 2010 starter

My computer came with Microsoft excel 2010 pre installed, all was working well till recently, I was able to reinstall, however I get a message that I have a licensing problem. I can't open any of my saved work on excel, or word. I did have a computer virus and had to restore my computer back to original state.

Hi:
I have zipped up and attached the Office 2010 Starter installation file under attachments below.
I have used this to successfully reinstall Office 2010 Starter in the past.
Since the program is free for use, there shouldn't be any issues with licensing as long as it is installed on a qualifying PC with W7.
In order to use the file, be connected to the internet, download, unzip and double click to run the file.
It will contact the Microsoft Office 2010 Starter download site and reinstall the program for you--both Word Starter and Excel Starter.
Attachments:
Office 2010 Starter Setup File.zip ‏981 KB

Microsoft Excel 2010 has overlaying, duplicate screens

My clients Microsoft Excel 2010 is showing two copies of the page on top of each other. This shows a confusing image. I scanned his hard drive and it is good. He is operating on a Dell E5420 with 4GB of RAM. I would attach a screenshot
but MS won't let me until my account is verified.

Re: seeing double
Maybe there is a picture of the sheet on top of the actual sheet.
Try clicking each of the "sheets" and pressing the delete key.
Jim Cone
Portland, Oregon USA
free & commercial excel programs (n/a xl2013)
https://jumpshare.com/b/O5FC6LaBQ6U3UPXjOmX2

Is it possible to easily run Microsoft office 2010 with access on a MacBook pro or have I wasted my money ?

Okay , first off thanks for any help in advance . I just purchased a MacBook pro for my daughter for college . ( finance major ) . Her class requires Microsoft office 2010 with access . As you probably already know , and I have just learned , that is no offered for Mac. Is there an easy way To run ms office with access on a MacBook pro or have I wasted my money ?

All that matters is file compatibility. The documents look the same. I've been a professor, so I don't see any issues here at all.
Another option you may want to consider is this: Run Windows on the Mac:
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
   1. Install the Apple Boot Camp software. Purchase Windows
         XP w/Service Pak2, Vista, or Windows 7. For Boot Camp
         4.0 and above you can only use Windows 7 or later. Follow
         instructions in the Boot Camp documentation on
         installation of Boot Camp, creating Driver CD, and
         installing Windows. Boot Camp enables you to boot the
         computer into OS X or Windows.
     2. Parallels Desktop for Mac and Windows XP, Vista Business,
         Vista Ultimate, or Windows 7. Parallels is software
         virtualization that enables running Windows concurrently
         with OS X.
     3. VM Fusion and Windows XP, Vista Business, Vista Ultimate,
         or Windows 7. VM Fusion is software virtualization that
         enables running Windows concurrently with OS X.
     4. CrossOver which enables running many Windows
         applications without having to install Windows. The
         Windows applications can run concurrently with OS X.
     5. VirtualBox is an Open Source freeware virtual machine such
         as VM Fusion and Parallels that was developed by Solaris.
         It is not as fully developed for the Mac as Parallels and VM
         Fusion.
Note that VirtualBox, Parallels, and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech Labs- Virtualization Benchmarks, January 2013 | MacTech for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

Problem accessing informix ODBC 32 bit System DSN using Microsoft Query external data sources in Microsoft Excel 2010

Hi all...
I'm hoping if anybody could help me. I'm using Microsoft Excel 2010 + Windows 7 Professional 64 bit. I've installed the informix client sdk for odbc drivers to create odbc 32 bit connection. Before this, i had successfully installed in
another Windows 7 Professional 64 bit PC the informix client drivers and configured the odbc connection for it. During that time, i can access the 32 bit ODBC using the microsoft query from the Microsoft Excel 2007. But now...in the new PC, even though i had
successfully installed the informix client and manage to configure the 32 bit ODBC for it, my Microsoft Excel 2010 can't call/recognise the 32 bit ODBC connection as if the Microsoft Excel 2010 only called the 64 bit ODBC. Is it in Microsoft excel 2007
it is possible to recognise the 32 bit ODBC but the Microsoft Excel 2010 can't? Is there any solution if my Microsoft Excel 2010 still want to use the 32 bit ODBC connection.

Hi,
Excel 2007 has only 32-bit since 64-bit applications for Office are available only for Office 2010. Thus, you can use
32 bit ODBC between Microsoft Excel 2007 & Windows 7 Professional 64 bit. Now, you are using Microsoft Excel 2010 64 bit & Windows 7 Professional 64 bit, thus, you must install the 64 bit ODBC drive. If you still need to use 32
bit odbc drive, please use 32 bit Excel 2010. Here is the detailed steps:
http://datasummit.co.za/how-to-install-an-informix-odbc-driver-on-windows-7-for-ms-office-2010
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Cannot sync Microsoft Sharepoint workspace 2010 with Sharepoint 2013 site

I keep getting the below error message when I try to sync a doc lib from a sharepoint 2013 site with sharepoint workspace 2010.
The field "AppAuthor" contains a lookup list "AppPrincipals" that cannot be resolved. The target list may not be part of the site
I have uninstalled Lync 2013, uninstalled and re-installed office 2010, 2687364 hotfix yet the issue still persists.
Any help will be greatly appreciated
Kind Regards
Louis
thanks

Hi,
Is this issue only occur in one client machine? Can other machines installed SharePoint Workspace 2010 works when perform syncing?
As you have reinstalled the 2687364 hotfix and the issue still exists, I suggest you install Office 2010 SP2 to see if it can work:
32-bit
http://www.microsoft.com/en-us/download/details.aspx?id=39667
64-bit
http://www.microsoft.com/en-us/download/details.aspx?id=39647
Feel free to reply with the test result if the issue still exists.
Best regards
Patrick Liang
TechNet Community Support

Collaborate on Excel workbooks with Sharepoint Foundation

My company recently implemented SharePoint Foundation 2013 and our shared Excel workbooks are no longer allowing multiple users to collaborate at the same time. We have verified that all the settings and permissions are correct and that checking in and
checking out is not required. Is this something that is not available with SharePoint Foundation? We are using Office 2013 installed on the clients, not Office online. Thank you.

Co-authoring of Excel workbooks is only supported when all the editors are using the Excel web application, not the Excel client application.
From
Microsoft's overview of co-authoring in SharePoint 2013:
>"Co-authoring is easy to use from the end user’s point of view. When a user wants to work on a document in Word 2013, PowerPoint 2013, OneNote 2013, Visio 2013 or one of the Office Web Apps, he or she merely opens it from SharePoint 2013 or SharePoint
Online, as usual. If another user already has the document open, both users can edit the document at the same time.
One exception to this is that users can co-author in Excel Web App only if everyone uses the Excel Web App to access the workbook. If anyone uses Excel 2013 or Excel 2010 (the client application)
to access the workbook, co-authoring in Excel Web App will be disabled for that workbook while it is open in the client application."
>"The Excel 2013 client application does not support co-authoring workbooks in SharePoint 2013 or SharePoint Online. But, the Excel client application uses the Shared Workbook feature to support non-real-time co-authoring workbooks that are stored
locally or on network (UNC) paths."

Excel Table with SharePoint Data Connection - Manual Text Entry Misaligned After Refresh

Greetings!
I have an Excel 2010 workbook that includes a table linked to my SharePoint 2013 site by a data connection. The SharePoint list feeds the table standard information that's managed on the SharePoint site, but I need the user of the Excel workbook to be able
to enter text manually in the workbook to associate local information with the line-items coming from the SharePoint list. To do this, I've added extra columns to the end of the table.
The user can enter information in the appropriate cells in the "extra" columns at the end of the table, but when I refresh the data connection, the addition of a new list item on the SharePoint side results in the user's manually entered text getting
out of alignment with the row it's supposed to be associated with.
Example
Column 1(SP)
Column 2(Extra)
Row 1
Item 1
Row 2
Item 2
Text entered for Item 2
Row 3
Item 3
Then, if I add a new item to the list in SharePoint, for example, something that would appear between the original items 1 & 2, after refreshing the table, I get the following:
Column 1(SP)
Column 2(Extra)
Row 1
Item 1
Row 2
New Item 1.5
Text entered for Item 2
Row 3
Item 2
Row 4
Item 3
The table's data connection is set to insert rows for new items, and I could swear I had this working properly once upon a time...but I can't seem to make it work now.
Any thoughts on what would cause this?
Thanks in advance!

Hi Eric,
>>but it seems that by extending the table itself to encompass both the SharePoint-sourced columns and the additional columns, that an association would be created between all columns for a given row in the table, no?<<
From my understanding, the answer is no.
Another example:
I have an additional column named "Column2" and an external column named "ID" (see "before").
After I add a new record and refresh this table, Excel will keep the last row in "column2" and add an empty cell in the second last row. (See "After")
If I delete the eighth data and refresh this table, Excel will still keep the last row and remove the last second cell.
In your case, if you insert a new record in the middle of the data and refresh this table, Excel will synchronized the external data and add a new cell in the additional column in the second last row.
From my understanding, Excel will always change the second last row to suit for deleting or adding record.
Hope this helps.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Excel Services with SharePoint List Data in SharePoint 2013 - Chart is not refreshing automatically

Hi Everyone,
This is My req: I m going to display pie chart and Bar chart in share point 2013.
Steps I have follwed:
1. Export the list to excel.
2.Using the Power Pivot table I have done the chart.
3. Uploaded into document Library.
4. Added into the web part.
Chart are displaying. But When ever user added the data into the list chart is refreshing.
Is there any option to refresh the data in chart? Waiting for valuable replies.
Regards, Manoj Prabakar

SharePoint lists as data sources in Excel Services is not supported.That's the reason refreshing is not working. There are some work around you can use -
Export as Data Feed - Export your SharePoint list as Data Feed , use this data feed to a PowerPivot for Excel workbook and publish this PowerPivot using Excel Services.
User-defined functions - write UDF in C# and extend the Excel Services functionality to work with SharePoint lists.
https://msdn.microsoft.com/library/bb267252(office.12).aspx#Office2007ExcelServicesUnlimited_SharePointLists
Web Services API -
The Web Services API can be used to push data from a database and then refresh the data in a SharePoint Server list by using Excel Services.
JavaScript Object Model - The JavaScript Object Model for Excel Services in Microsoft SharePoint Server 2010 provides many solutions for Excel Services.
More details -
https://technet.microsoft.com/en-us/library/gg576960.aspx
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

How to export data from MS Project 2010 to MS Excel 2010 with formatting

I have created a Project 2010 export map to Excel 2010. It works fine. I have two questions that I cannot determine an answer. I'm not sure if its a project or excel setting. I have spend hours trying to make it
work with little success.
1. When the task name field is exported to excel it losses summary/task indent. Is there a way to set it up so it works via the export map?
2. The Start & Finish fields in project is setup as 5/26/11 when they exports to excel it shows up as 5/26/11 8:00 AM. Is there a way to set it up either in project export map or excel so its formated as a date field.
Excel's Format Cell function does not seem to work converting them back to just 5/26/11.
How can I keep the outlines and formatting in my data while exporting it to Excel.
I would appreciate any guidance.
Yogesh

Rameshchandra --
Two things I would recommend:
Do not add your question at the end of a post that is marked as Answered. In the future, please post your question as a new question so that everyone will notice it and be able to answer it.
Because this is a programming question, please repost your question as a new post in the Project Customization and Programming user forum at:
http://social.technet.microsoft.com/Forums/projectserver/en-US/home?forum=project2010custprog&filter=alltypes&sort=lastpostdesc
Hope this helps.
Dale A. Howard [MVP]

"Document Not Saved" Microsoft Excel 2010 SP1

We have a remote office which has a 2mb WAN link, The users in the remote office have a variety of Office installs from 2003 to 2010 SP1.
When attempting to open an excel file over the WAN link (The file is on our main shared drive in Sydney) they can open and edit the document however when it comes to saving they receive "Document not saved" and the original document is gone and a .tmp file
remains where the original file was on the network drive/shared folder.
If they then hit save a second time it saves correctly and the document is in the correct .xls format.
The excel files do have some funky tables etc in them and are a few mb's in size, however we have the same issue with a new excel document with only one word written in it.
Does anyone know what would be causing this issue?
We have tried added NetworkResiliency and PivotTableNetworkResiliency as per http://support.microsoft.com/kb/291204.
We have tried removing certain hot fixes from Microsoft as mentioned in http://support.microsoft.com/kb/983458.
We added the share to be a trusted site.
There are no errors in Event Viewer.
I have found another few threads on similar issues with no fix:
http://social.technet.microsoft.com/Forums/en-US/office2010/thread/f559b061-b98f-4b33-ab8a-d1a41d2e8cb8/
http://social.technet.microsoft.com/Forums/en-US/officeappcompat/thread/4af962a0-d883-4e82-8995-7eb766d6c720
We do have a RiverBed at the remote office and one at the site in Sydney which is for network optimization. On the RiverBed with have all CIFS ports added and QoS marking done so it should be optimized.
Any assistance with how to fix this annoying issue would be greatly appreciated.
Thanks

We're having the same exact issue in our office where we just installed a new Riverbed Steelhead as well... only happening in that office as well...User opens a document on a network share that the rest of the company works from day to day, they save 10
or 20 minutes later and BAM... "There has been a network or file permissions error. The network connection may be lost", then a non-hidden *.tmp file is then created in the same network directory as the actual file and the original file doesn't get
written to, you click [OK] on the error and then try to save again and it magically works...and you're left with a messy TMP file as well in the directory now. I doubt it's related to antivirus, definitely not firewall, reinstalling/repairing office and tweaking
settings doesn't help, I agree it has nothing to do with locking files or read-only files as they're plain old word docs and excel files...MAYBE it has to do with the Riverbed WANOP appliance but either way... don't you love how this thread just randomly died
with no solutions? :'( Thanks Micro$oft ;)
{Edit} Oh! And one last thing...this MIGHT help steer someone in the right direction in the future... there could be a problem related to your network filer such as a NetApp appliance, EMC, Netgear etc where there is an SMB version mis-match or a bug of some
kind requiring you to apply a patch your storage device in order to fix this type of issue.

Problems with exporting PWA views (grids in general) to Excel 2010 with Windows 8 + IE 10 as a client configuration

Hello,
I wondering if windows 8 + IE10 is a supported client configuration for PWA (Project Server 2010). I am unable to export PWA views to Excel 2010. No problems with Windows 7 + IE8/9
Any ideas?
thanks,
Daniel
Daniel Villacis

Hi,
We followed the below steps in the local machine and check the behavior.
a. Open the Windows registry editor (regedit.exe)
b. Go the location HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\App Paths\excel.exe
c. Here, you’ll see a string value named “useURL”
d. Rename this value to something else. For example “useURLx”
Note: You might have to restart the machine to apply the registry change to take effect.

Excel & Hyperlinking with Sharepoint

I have a tracking document in Excel that has each entry linked to another place on Sharepoint to locate files and intranet articles. There are no formulas or other complex entries....just text and hyperlinks.
If I open the Excel file in Sharepoint and edit it there, we have no issues.
If I download the Excel file to my desktop...all links to other files are broken (the intranet file links remain active). When I try to access the link I receive a pop up window that states, "Cannot open the specified file."
This is a file accessed by multiple people and used as a resource, there are well over 100 linked entries and the group would like to be able to use the file on their desktops.
I have already found and unchecked the "Update Links on Save" option. This now allows me to download the file to the desktop, have no access to the links, and then upload it where I can then access the links again.
Is there any way to preserve the links so they can be accessed on the desktop?
Software Specs
Windows 7
Office 2010
Explorer 8
Thank you,
Christine

The links are absolute. All links are to our internal team site or to our intranet. The intranet links aren't affected.
This wasn't an issue before the company upgraded us to Windows 7/Office 2010.
The links are established (right click, select Hyperlink, copy/paste from browser) while the Excel file is on the desktop and all work fine there. The Excel file is then uploaded to Sharepoint where the links continue to work. When the Excel file is
downloaded to the desktop again...all links are broken. If I re-upload it to Sharepoint though, it is fine.
I double checked the actual link. It reads the same on the desktop initially as it does on Sharepoint. When the file is downloaded to the desktop again it seems to be missing the first half of it. What function could be editing the link?
Christine

Synchronizing Microsoft Excel 2010 with Sharepoint 3.0

Similar Messages

Maybe you are looking for