Syncing a Block of Text Between Two Documents

I use Word 2011 on my Mac and I have two rather long MS Word documents (call them A and B) that are completely different from one another except for one block of text (call it C) which is the same in both documents. If Pages is capable of doing what I am describing below I will transition to that platform.
The contents of C need to change frequently and I am looking for a way to ensure that if I make a change to C in A it automatically makes that change in B and vice-versa. I would need changes to any other type of content associated with C, such as footnotes, to remain consistent between A and B as well. I've tried googling around but don't even know what a feature like this would be called.
Thanks in advance,

Pages doesn't have the feature. Yo can download and read the Pages User Guide from http://www.apple.com/support/pages/ to learn more about Pages

Similar Messages

I want to know what for is the "Sync" button in Lightning and if there is a way to sync my LOCAL Lightning calendars between two computers. Thanks

I want to know what for is the "Sync" button in Lightning and if there is a way to sync my LOCAL Lightning calendars between two computers. Thanks

sync is about synchronizing network calendars. Simply create a network calendar and synchronize it on multiple machines and forget local calendars.

Getting text between two tag

Hello,
what would be the best method to implement to get text between
two tags,
eg <TEST1> this is a test </TEST1>
as in; this is a test,
i try to use BreakIterator, but it skip the tags,
when i do word by word loop

this is one way:
String string = "<TEXT>This is the middle text</TEXT>";
String x = string.substring(string.indexOf("<TEXT>") + "<TEXT>".length(), string.indexOf("</TEXT>"));

Can you text between two iPod touch iPods and is it free?

Can you text between two iPod touches and is it free? Is it free to text from Canada to US?

Yes and yes. Both iPodsneed to have iOS 5 installed.

Is there a way to delete text between two strings?

In Pages, is there a way to delete all text containted between two strings?
For example, if I have a text document that looks like this:
String 1
String 2
Unwanted text
Unwanted text
String 3
String 4
Is there was to delete the unwanted text between string 2 and 3 so it looks like this:
String 1
String 2
String 3
String 4
The unwanted text is differnet between documents but string 2 and 3 are constant. I want to do this via automator for the same strings on multiple documents.
Any help is appreciated!

Do you mean Pages '09 v4.3?
There were some links here:
https://discussions.apple.com/message/24051199#24051199
Peter

How do we sync contacts and calendars (ONLY) between two iCloud accounts, two iPhones and one iMac with two user accounts?

This is complex. Until today we had one iMac with two user accounts - one for me and the other for my wife. We sync'd our calendars and contacts between our two user accounts using my iCloud account, thereby keeping our schedules coordinated and our contacts information always the same between us. Also, as I had an iPhone, I sync'd my phone with my iCloud account, thereby keeping the contacts and calendars in the two user accounts on the iMac AND my iPhone sync'd. (I also sync'd other things, like Notes and Mail and Safari settings, between my iPhone and my user account on the iMac, but my wife did not want to be burdened with all my emails showing up in her email account and I wasn't interested in hers, etc., so we didn't sync anything between us other than calendars and contacts.)
We've finally bought my wife an iPhone and set up an iCloud account for her. And of course she now wants to sync several items from HER account on our iMac to HER iPhone, but I don't want them, just as she doesn't want all of my other stuff. But we still want our mutual calendars and contacts to sync to HER new iPhone, just like they already do to mine. But I can't figure out how to CHANGE her iMac user account from using MY iCloud account on the iMac to using HER new iCloud account, and then having HER iCloud account speak to MY iCloud account but share JUST our calendars and contacts.
Originally I tried a workaround by simply having her iPhone log into my iCloud account. That works great for the calendars and the contacts. But...she can't sync anything else from her iMac account to her new iPhone because she's presently "forced" to use my iCloud account. And neither of us want to sync our other things to each other's iMac accounts or iPhones. Also as we're both using my iCloud account, in things like the Find My iPhone app, the Cloud is seeking two phones labeled with my name and none with her's. So we definitely don't want this as the set-up and communications network between our devices.
We want to set up our users on the iMac to sync to our SEPARATE AND DIFFERENT iCloud accounts and then have those iCloud accounts sync calendars and contacts (ONLY) between themselves, and then push that data to our separate iPhones (or the other way, from either of our iPhones to the individual accounts on our iMac and the other person's iPhone). Does this description make sense to you? I've diagramed it nicely using Keynote, but even thiough I can draw it, I can't figure out how to set up and configure all the devices to make it work. If you would like me to send the Keynote slides (just two of them - the current and desired configurations - please send your email address to me at [email protected] and I'll be happy to forward it to you.
If anyone can help me set this up I'd be most appreciative! Thanks so much. Merry Christmas and Happy New Year to all readers in this community!

BobT.
I had the same problem, and decided to look into it last night.
First of all, the solution I would like to have is for Apple to allow for selection of iCloud accounts per application, i.e. Contacts to one, Photo Stream to another. I believe this would be the most straight forward solution for the problem we are facing.
Since this is not an option I came up with a workaround. I was most interested in solving this for Contacts, so this is what I tested for. Now I have all 3 devices with the same contacts.
1) Turn off iCloud for Contacts on all devices. On the device that has the Contacts list that you would like to propagate to all others select to keep the contacts, and on the others select not to keep them.
Note that the current backups still exist on iCloud, so in case something goes wrong you can still turn the iCloud for Contacts back on to get your current Contacts back.
2) In iTunes, sync All Contacts with the phones, starting with the one with the Contacts content you chose to keep.
From this point on, the 3 devices should sync contacts with each other.
This, of course, will stop your iCloud backups of Contacts, but I don't think this is really needed. You are already storing copies of your Conacts on 3 devices, which for good parts of the day are likely not all co-located. You also potentially have Time Machine backups turned on, which would mean there is a 4th copy there as well. For the case of Contacts iCloud only complicates matter ... that is until Apple implements the solution I first wrote about.

Move a block of text from one document to another

How to make a script moving a block of text from a defined area to next document?

Here is the beast.
--[SCRIPT exportTextBlocks]
Save the script as a Script, an Application or an Application Bundle: exportTextBlocks.xxx
Move the newly created application into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Pages:
Maybe you would have to create the folder Pages and even the folder Applications by yourself.
select something in the source document
menu Scripts > Pages > exportTextBlocks
creates a new Pages document with the chunks of texts which where delimited by the markers.
--=====
The Finder's Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the "Show Script Menu in menu bar" checkbox.
--=====
Yvan KOENIG (Vallauris, FRANCE)
26 avril 2009
--=====
Here it would be easy to edit it if required
property marker : "______"
on run
my activateGUIscripting()
tell application "Pages" to tell document 1
set nDocSource to name
set source to body text
end tell -- Pages
set source to my decoupe(source, marker)
set extraits to {}
repeat with i from 1 to ((count of source) - 1) by 2
copy item (i + 1) of source to end of extraits
end repeat
copy "" to end of extraits
set extraits to my recolle(extraits, marker & return)
set destName to dateTimeStamp() & ".pages"
set destDoc to my makeNewPagesDoc(destName, path to documents folder as text)
tell application "Pages"
set body text of document destName to extraits (* inserts the extracted blocks *)
save document destName
my selectIworkDoc(name, nDocSource) (* back to source document *)
end tell -- Pages
end run
--=====
on decoupe(t, d)
local l
set AppleScript's text item delimiters to d
set l to text items of t
set AppleScript's text item delimiters to ""
return l
end decoupe
--=====
on recolle(l, d)
local t
set AppleScript's text item delimiters to d
set t to l as text
set AppleScript's text item delimiters to ""
return t
end recolle
--=====
on dateTimeStamp()
return (do shell script "date " & quote & "+P%Y%m%d-%H%M%S" & quote)
end dateTimeStamp
--=====
on makeNewPagesDoc(n, d)
local f, t
set f to d & n
set t to ((path to applications folder as text) & "iWork '09:Pages.app:Contents:Resources:Templates:Blank.template:") as alias
tell application "Pages"
open t
save document 1 as n in file f
end tell -- Pages
return d as alias
end makeNewPagesDoc
--=====
Use GUI scripting
on selectIworkDoc(a, n)
local m
if a = "Pages" then
set m to 9
else if a = "Numbers" then
set m to 10
else if a = "Keynote" then
set m to 11
else
error "The application “" & a & "“ is not accepted !"
end if
tell application a to activate
tell application "System Events" to tell application process a to tell menu bar 1 to tell menu bar item m to tell menu 1 to click menu item n
end selectIworkDoc
--=====
on activateGUIscripting()
tell application "System Events"
if not (UI elements enabled) then set (UI elements enabled) to true (* to be sure than GUI scripting will be active *)
end tell
end activateGUIscripting
--=====
--[/SCRIPT]
Yvan KOENIG (from FRANCE dimanche 26 avril 2009 22:32:24)

Getting text between two special characters as a new line

Hi all ,
I hope some one can point me in the right direction or tell me if its possible or if there is a function that can do this in tsql. I have table with two fields in a table ORDERNUM,NARRATIVE. The values in the NARRATIVE field are some what like this (they
come from a flat while and are delimited by a "^"). The examples are like :
OREDERNUM NARRATIVE
1234 ^Parcel shipped^picked^entry passed then returned back^white ford truck number 78455333^freight charges entered^parcel weight entered^parcel supervised^ticketsscannned^broken glass on
floor^
what i want to is seperate the text between the "^" as new line like
1234 parcel shipped
1234 picked
1234 entry passed then returned back
1234 white ford truck number 78455333
Can anyone please help me, is there a way or can any one show me what function does this? SUBSTRING for sure is not an answer as there is no fixed length for this.
Thanks
SV

CASE_NUMBER NARRATIVE
000000GA ^000000G-A CHIEF OF POLICE 02-02-95 PGE 1^***BATCH RUN COPY***^INCIDENT: MOLEST OTHER^LOCATION: 00416 N COLORADO AV OTHER:^EI20^ATTENTION:^ SEX OFFENSE^NOTIFIED: 02-01-95 2300 HRS BY: OTHER INVEST 02-01-95 2305 HRS^ARRESTS: 00 INJURED: 00 DEAD: 00 VEH TOWED: 00 BEAT: B51^^PERSON 01^VICTIM-PERSON^STEVE WOOLBRIGHT NH/W/M/14/08-31-80^SUBPEONA: N^ADDRESS: 00416 N COLORADO AV^HOME-PHONE: 322-9249^^^NARRATIVE:^REPORT MADE FROM STATE 310 REPORT STATING ABOVE-LISTED SUBJECT^HAS BEEN SEXUALLY MOLESTED. INVESTIGATION REQUESTED.^^4725 POPCHEFF A P4687^^02-01-95 2025 HRS - WILDER EULA W3163 TAPE:02^^ 95.033 00:23-END OF REPORT-95.033 00:26^^^
000718GB ^000718G-B ADDITION CHIEF OF POLICE 08-08-95 PGE 1^***BATCH RUN COPY***^INCIDENT: RECOVERED STOL. VEH PUBLIC STREET-ALLEY^LOCATION: PLAINFIELD,IN OTHER:^OCCURED: 04-01-93 TIME UNKNOWN EO11^ATTENTION:^ AUTO DESK AUTO THEFT WEST DISTRICT^NOTIFIED: 08-07-95 1600 HRS BY: OTHER INVEST 08-07-95 1600 HRS^ARRESTS: 00 INJURED: 00 DEAD: 00 VEH TOWED: 00 BEAT: OJ^^PERSON 01^OWNER/OPERATOR^DAVID FURMAN NH/W/M/ 08-20-57^DRIVERS LICENSE/SSN: 310702334^ADDRESS: 02495 AVON RD PLAINFIELD IN^HOME-PHONE: 838-0467^^^VEHICLE 01^PICKUP^BLACK 91 FORD F350 2DR^VIN: 2FTJW35G6MCA99397^DISPOSITION: RECOVERED^COMMENTS: OWNER RECOVERED VEHICLE IN 1993^^NARRATIVE:^ON 08/07/95, I RECEIVED A PHONE CALL FROM JAMES BEARD OF THE^^ -CONTINUED-^
000718GB ^000718G-B ADDITION CHIEF OF POLICE 08-08-95 PGE 2^^NATIONAL INSURANCE CRIME BUREAU WHO STATED HE WAS DOING A^CHECK OF HIS RECORDS AND CAME ACROSS A VEHICLE THAT WAS^STOLEN ON 04/24/92, UNDER IPD CASE #00718GA. HE STATED HE HAD^SPOKEN TO THE INSURANCE COMPANY ON THIS CASE AND THEY STATED^THEY HAD PAID OFF ON THE VEHICLE AND SOLD THE VEHICLE BACK TO^THE OWNER. APPARENTLY THE PERSON REPORTING THE EVENT, DAVID^FURMAN, REPORTED HIS VEHICLE STOLEN ON 04/24/92, APPROXIMATELY^1 YEAR LATER HE WAS CONTACTED BY AN UNIDENTIFIED PERSON AND^TOLD HIM TO MEET HIM ON A CORNER IN THE INDIANAPOLIS AREA AND TO^GIVE THE MAN $5,000.00 AND HE WOULD GIVE HIM HIS TRUCK BACK.^MR. FURMAN HAD ALREADY BEEN PAID BY THE INSURANCE COMPANY^APPROXIMATELY $31,000.00 IN RESTITUTION FOR HIS VEHICLE.^MR. FURMAN THEN WENT TO THIS CORNER LOT AND MET WITH THIS^UNIDENTIFIED W/M AND PAID HIM $5,000 CASH. THE MAN THEN TURNED^THE 1991 PICKUP TRUCK OVER TO MR. FURMAN. MR. FURMAN THEN^SETTLED WITH THE INSURANCE COMPANY AND PAID THEM $19,000.00 AND^BOUGHT THE VEHICLE BACK FROM THE INSURANCE COMPANY AND IT IS^NOW TITLED TO HIM AND REGISTERED TO HIM. HOWEVER, AT NO^POINT DID MR. FURMAN OR THE INSURANCE COMPANY CONTACT THE^POLICE DEPARTMENT TO TAKE THE VEHICLE OUT OF THE SYSTEM AS^BEING STOLEN. THAT IS THE REASON FOR THE REPORT. THE VEHICLE^SHOULD BE REPORTED AS A RECOVERED AND RELEASED TO OWNER. DAMAGE^UNKNOWN.^^^^ -CONTINUED-^
select TOP 214
CASE_NUMBER,
splitdata
from
SELECT F1.CASE_NUMBER,
O.splitdata
FROM
SELECT *,
cast('<X>'+replace(F.NARRATIVE,'^','</X><X>')+'</X>' as XML) as xmlfilter from [dbo].[CECASRPT] F
)F1
CROSS APPLY
SELECT fdata.D.value('.','varchar(5000)') as splitdata
FROM f1.xmlfilter.nodes('X') as fdata(D)) O
)t
where t.splitdata <> ''
SV

How to get a text between two XML tags?

Hello everybody!
I've got a problem! How can I extract a text that is between tags, like <myTag> My text </myTag> I have no problem to get the attributes inside the tags, however, i don't know how to get some text that is between tags. Here is my xml:
<?xml version="1.0" encoding="ISO-8859-1"?>
<tangram_request service_id="3">
<send keep_session="nada">
<source></source>
<destination>3196931566</destination>
<channel_id>2</channel_id>
<text>Teste ServerSocket!!!</text>
</send>
</tangram_request>
Now, there's a fragment of my code, which gets some tags' attributes:
DOMParser parser = new DOMParser();
InputSource resp = new InputSource(new StringReader(XML));
parser.parse(resp);
Document doc = parser.getDocument();
Node node =(doc.getElementsByTagName "tangram_request")).item(0);
if (node instanceof Element)
Element el = (Element) node;
service_id = el.getAttribute("service_id");
System.out.println("\n\nService_id="+service_id);
}else{System.out.println("Erro");}
node = (doc.getElementsByTagName("send")).item(0);
if (node instanceof Element)
Element el = (Element) node;
keep_session = el.getAttribute("keep_session");
System.out.println("keep_session="+keep_session);
}else{System.out.println("Erro");}
Now, I want to get the texte between <destination> ... </destination>
How could I do that?
Thanks a lot
Calegari

Thanks... It worked fine!!!
Now how can I get lots of <desctination>... I did something that haven't worked...
node = (doc.getElementsByTagName("destination")).item(0);
while(node.hasChildNodes())
destination = node.removeChild(node.getFirstChild()).getNodeValue();
System.out.println("destination="+destination);
And now, my XML is like:
<?xml version="1.0" encoding="ISO-8859-1"?>
<tangram_request service_id="3">
<send keep_session="nada">
<source></source>
<destination>3196931566</destination>
<destination>3196931567</destination>
<channel_id>2</channel_id>
<text>Teste ServerSocket!!!</text>
</send>
</tangram_request>
Thanks so much!
Calegari

How to create Doc Link between two document numbers?

Hi Folks,
I have two document numbers with different transaction type.
I want to create a Document link between these two documents, i.e. each documents should come in Dock Flow of each other.
How to acheive this target.
I tried to do it by using FM CRM_DOC_FLOW_MAINTAIN_OW, but not able to achieve it.
So please tell me how to do this thing.
Regards
PG

Hi PG,
The FM CRM_DOC_FLOW_MAINTAIN_OW should work , I am not sure what parameters you are passing. Any way you can use the CRM_ORDER_MAINTAIN as well which will eventually call CRM_DOC_FLOW_MAINTAIN_OW . Have a look of the sample code, This will give you some idea
lw_input_field_names-fieldname = 'GUID'.
      INSERT lw_input_field_names INTO TABLE lt_input_field_names.
      CLEAR lw_input_fields.
      lw_input_fields-ref_kind    = gc_object_kind-orderadm_h.
      lw_input_fields-objectname = gc_object_name-orderadm_h.
      lw_input_fields-ref_guid    = lw_orderadm_h1-guid.
      lw_input_fields-field_names = lt_input_field_names.
      INSERT lw_input_fields INTO TABLE lt_input_fields.
      lw_doc_link1-objkey_a   = lw_orderadm_h-guid.
      lw_doc_link1-brel_kind = gc_brel_kind-header_header.
      lw_doc_link1-brel_mode = gc_mode-create.
      lw_doc_link1-reltype    = gc_bin_rel_type-predecessor_successor.
      INSERT lw_doc_link1 INTO TABLE lt_doc_link1.
      lw_doc_flow1-ref_guid   = lw_orderadm_h1-guid.
      lw_doc_flow1-ref_kind   = gc_object_kind-orderadm_h.
      lw_doc_flow1-doc_link   = lt_doc_link1.
      INSERT lw_doc_flow1 INTO TABLE lt_doc_flow1.
      CLEAR lw_input_fields.
      REFRESH lt_doc_link1.
      lw_input_fields-ref_kind    = gc_object_kind-orderadm_i.
      lw_input_fields-objectname = gc_object_name-orderadm_i.
      lw_input_fields-ref_guid    = lw_orderadm_i1-guid.
      lw_input_fields-field_names = lt_input_field_names.
      INSERT lw_input_fields INTO TABLE lt_input_fields.
      lw_doc_link1-objkey_a   = lw_orderadm_i-guid.
      lw_doc_link1-brel_kind = gc_brel_kind-item_item.
      lw_doc_link1-brel_mode = gc_mode-create.
      lw_doc_link1-reltype    = gc_bin_rel_type-predecessor_successor.
      INSERT lw_doc_link1 INTO TABLE lt_doc_link1.
      lw_doc_flow1-ref_guid   = lw_orderadm_i1-guid.
      lw_doc_flow1-ref_kind   = gc_object_kind-orderadm_i.
      lw_doc_flow1-doc_link   = lt_doc_link1.
      INSERT lw_doc_flow1 INTO TABLE lt_doc_flow1.
      CALL FUNCTION 'CRM_ORDER_MAINTAIN'
        CHANGING
          ct_orderadm_h     = lt_orderadm_h1
          ct_input_fields   = lt_input_fields
          ct_doc_flow       = lt_doc_flow1
        EXCEPTIONS
          error_occurred    = 1
          document_locked   = 2
          no_change_allowed = 3
          no_authority      = 4
          OTHERS            = 5.
      IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        RAISE error_occurred .
      ENDIF.
Hope this will help.
Thanks,
Vikash.

Is it possible to sync Lightroom and LR Mobile between two desktops?

I have an Ipad, iPhone, Mac and Windows 7 PC. I can sync LR Mobile between the iPad, iPhone and Mac OR between the iPad, iPhone, and Windows 7, but LR will not let me sync between all four. Whenever I open LR on my Mac after syncing with my PC, it says that I either have to switch catalogues (which then deletes all of my mobile collections) or stop syncing that machine altogether.
It seems like it should be possible to have a catalogue on my PC and then download my collections from LR Mobile. Can I do this?

Is it possible to check whether this functionality is in the roadmap for LR? I would love this feature - I have LR installed on 2 Windows machines and would like to sync my photos (and edits!) between these. It may be possible using Dropbox or similar service but it feels like this should be built-in to CC.

Regex: Extracting text between two HTML tags

Hello,
the common answer to this question would be
<tag>(.*)</tag>
or
<tag>[^<]*But I have LFs (and whitespace) around the tags:
<html>
<body>
    One text line to be retrieved.
</body>
</html>So I tried
(?s)<body>(.*)</body>But that didn't help.
What's missing?

Thanks for your replies.
@Sabre
I tried your suggestion with the following code to no avail
import java.util.*;
import java.util.regex.*;
public class X {
public static void main(String[] args) {
      String s=
"<html>\n"+
" <head>\n"+
"\n"+
" </head>\n"+
" <body>\n"+
"    One <u>text line</u> to be retrieved.\n"+
" </body>\n"+
"</html>";
    String regex= "<body>([^<]*)</body>";
    Pattern p = Pattern.compile(regex); // Create the pattern.
    Matcher matcher = p.matcher(s); // Create the matcher with the string.
    while (matcher.find()) {
      System.out.printf("Found: \"%s\" from %d to %d.%n",
               matcher.group(), matcher.start(), matcher.end()-1);
}@ejp
Paul had a similar objection. But as I've written, my html string will always have this same structure and all I have to do is to extract the text. So if regex doesn't work in that case, I'd rather prefer two indexOf-s instead of bothering a parser.

Sync photo book print project between two Macs?

I have two Macs synced using iCloud Photo Library which works great. I noticed that the Photo Books (and other print products) don't sync. Is there a way to find that file in the Package Contents and copy it over to my other Mac? Probably not the safest thing to do but I would love to be able to work on my photo book on multiple Macs. If not I guess I could put my library on an external drive and use access the same library from both Macs.
Thanks.
Lori

Hi(Bonjour)!
kpriest1 wrote:
I have a WD 750gb Hard Drive on my imac partitioned 2 times 500gb for time machine and 250 just for FCE scratch disk files. I can log on to my macbook via wireless network and transfer files back and forth. I'm just not sure of all the files FCE uses when working on a movie. I think if I knew what files they are I could lump them together in one folder and copy that folder back and forth to each other via wireless. As long as path is the same on both mac. I'm just not sure and need someone that's maybe been there.
Keith
Wireless connection is a bad idea as data rate transfer speed needed for video material is pretty fast. I'm sure that your macbook air hard drive is not designed to give a sustained data rate tranfer speed for a such usage.
Partitionning is a bad idea too as your internal drive has to seek for data stored on 2 logical locations fitted on just one physical support. It seems many many actuator stop and go and less efficient data rate transfer speed.
I maintain my suggestion, go for a dedicated external hard drive where you will put all media related to your project AND the project file itself. If FCE is correctly installed on both mac, your project will open flawlessly from one mac or other.
Michel Boissonneault
Message was edited by: Michel Boissonneault

How to implement one to many relationship between two Document Line Table

Hi,
I want to implement the following relationship into user defined tables:
Example Situation:
There are tables A, B and C.
For one record of Table A, there could be multiple records in table B.
For one record of Table B, there could be multiple records in table C.
i.e. A(1) -> B(n) [One to many relationship]
B(1) -> C(n) [One to many relationship]
finally: A(1) -> B(n) -> C(n)
How can I achieve this? If I make Table A as Document and table B & C as Document Line and then make them UDO, will it work? Kindly suggest me a solution.
Regards,
Sudeshna.

Hi,
I think that the database representation is exactly what you ask for. 3 tables, A, B, C. A should have a UDF that is linked to B table, and B should have a UDF that is linked to C table.
You should manage the database transactions, and the UI to support all this stuff.
Regards,
IBai Peñ

Change or delete the docflow link between two existing documents

Hi All,
Is there any FM or soulution to change the doc flow link between two documents .
For ex .. i have document A and document B , and created a doc flow link from A to B , Now i have to change the succeeding document to C
I have tried to modify the doc link ,but its not working using crm_order_maintain.I thought of deleting the link between A and B and then create a new link Between A and C , but deletion of link bewteen A and B is also not working.
I have checked with FMs CRM_DOC_FLOW_DELETE_CHECK_EC and CRM_DOC_FLOW_DELETE_EC, followed by CRM_ORDER_SAVE AND COMMIT . i could not find any exception from this FMs , but still the doc link is not deleted.
Pls share if you have any suggestions.
Regards,
Nithish

Hello
I wrote a report to delink items from document flow. I uploaded it [here|http://wiki.sdn.sap.com/wiki/display/CRM/Removelinksfromdocumentflow].
Please, use with caution and always perform careful tests before you run it in a production envinronment.
Hope it helps
Joaquin
Edited by: Joaquin Fornas on Nov 15, 2011 11:49 AM

Syncing a Block of Text Between Two Documents

Similar Messages

Maybe you are looking for