Syncing not working after rebooting PC

My dad's PC needed to be rebooted from scratch. He had Windows 8 but now has Windows 7 as the OS. I synced all the content early into the day before restarting the PC with W7 several hours later. It said everything was fine for his account, and it's syncing. I began using W7 and now have been unable to sign in into his account to sync all his bookmarks.
Why is this happening and is there a way of getting this content back?!

Hi julian90,
Was the account you synced before the reboot from scratch on an earlier version of Firefox? If so the new Sync is on a new server and is not designed to be a backup. However inorder to access the last successful sync you will need the old version of sync. [[Install an older version of Firefox]]
If it is the new version of sync then you may have to reset the password and to sync.

Similar Messages

Wifi sync not working after ios6

I have upgraded all my devices to latest ios6 and now wifi sync does not work. I have 2 devices syncing to windows Xp laptop which are not syncing. I also have an additional iPad syncing to my iMac. None of them are working as of late. Tried rebooting everything and wifi sync is intermittent at best. Bottom line, seems like an ios6 problem, but not finding a lot of help. Any suggestions?

Ironically, updating to iOS 6.0.1, at least for now - seems to have made WiFi sync more reliable for me on my iPad 3, and my MacBook running OS X 10.7.4 and the latest version of iTunes.
if you have quit iTunes, rebooted your devices and restarted the computers and that didn't help, this is what I would suggest next ... And in no particular order.
Turn WiFi off on your iPad, restart it and then turn WiFi on again.
Try rebooting your router. Even though you may have Internet connectivity with all devices, rebooting the router might just work anyway.
Connect the iPad to your computer and launch iTunes, select the iPad under devices, click on the Summary Tab and uncheck Sync this iPad over WiFi. Click on Apply in the lower right corner. Sync your iPad. After the sync completes, go back to the Summary Tab. Click on Sync this iPad over WiFi. Click on Apply and wait for the changes to be applied. Quit iTunes and disconnect the iPad.
Restart your computer, launc iTunes again and see if it works now,

Disabling E-mail notifications not working after reboot

Hello. It seems that the mail notification and the mail count still persist even if I have it disabled on the settings after rebooting. I've checked the settings after reboot and it is still set as disabled (after following the guide), but the notifications still appear. Is this an bug on the on the app that needs to be fixed? Or am I missing something? Thanks.

I've had a number of problems with the Playbook not recognising the settings I've chosen. In this case, with disabling email notifications, it resets after each reboot.
I've found that if I go into my the Messages app, and then into Message Settings, it shows that alerts are set to be off (display message count, and display new message indicator). The fix for me is to enable alerts, go back to main app screen, then go back into settings and disable alerts once more. At that point the settings seem to stick. So whenever I reboot the playbook, I just have to do that and notifications will remain off until the next reboot.
Let us know if that works for you too. Maybe it will help the engineers figure out what's wrong.

[SOLVED] Printer not working after reboots

I recently built my won desktop running Arch. Every thing works fine except for printer. Printer is Brother MFC-290c. It is a Multinational printer (i.e Scanner and printer together).
Once I configure the printer it works fine until the next reboot. After reboot printer user/group changes to root:scanner.
# ls -l /dev/bus/usb/005/002
crw-rw-r-- 1 root scanner 189, 513 Jun 9 07:17 /dev/bus/usb/005/002
So after every reboot I need to do "lsusb" to look for Bus and Device ID for the printer and change its owner/group to root:lp. After this step is performed Printer works fine until next reboot.
$ lsusb
Bus 005 Device 002: ID 04f9:01fd Brother Industries, Ltd
Bus 005 Device 004: ID 045e:00f9 Microsoft Corp. Wireless Desktop Receiver 3.1
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
How can I make sure that whenever I plugin this printer its user and group is root:lp instead of root:scanner
Last edited by nik (2013-06-10 00:48:50)

SOLVED :D:D:D
Thanks Strike0. That was a push in right direction. After reading your reply, I decided to take a look at my udev rules. There was not one for my printer but there was one for the Scanner. I do not yet know how to read udev file, but sure enough it looked as if it was causing all problems . Renamed the rules file for the scanner to see if everything works fine in its absence. Rebooted, Printer and scanner are both working fine now.

AD OID sync not working after relocating servers

Experts,
OAS 10g (9.0.4.3.0)
The AD/OID synch which runs once a day did not run after the servers were relocated. I had run the chgip on both infra and midtier and the applications are running without any problems.
How can I troubleshoot this? Where are the logs generated for the AD/OID sync.
Regards
v

Logs for OID-AD sync are located under $ORACLE_HOME/ldap/odi/log.
it will also be important that you check odisrv log file for any errors (this is located underf $ORACLE_HOME/ldap/log

ITunes WiFi sync not working after Lion reinstall

Hello all,
Here is the situation. Wifi syncing was working superbly well for both my iPhone and my iPad. They could be upstairs while I was downstairs in my office and I would see them both in iTunes and could sync them at will. Great stuff!
Until yesterday. I bought a new hard drive for my Macbook Pro, installed Lion on it and imported all of my apps and settings on it. Everythings works fine EXCEPT for wifi syncing. When I plug my devices to the USB cable I see them appear in the iTunes sidebar but I soon as I disconnect them, POOF! They're gone!
The checkbox IS checked. I tried unchecking it, syncing via USB, rechecking it an resyncing to no avail. I just can't get the darned thing to work again!
Both devices and the laptop have been restarted multiple times.
Any ideas?
Thanks!

Can't believe it was so simple.
I just restarted my Mac and everything came back to normal.
Ok then sorry for the disturbance, move along, nothing to see here.

To Apple engineers: Home sharing and wifi sync not working after fresh install

Have been using wifi sync and home sharing on my Macbook 5,1 since its early debut.
Since Macbook 5,1 is old i am using it to stream MP4 files to my Apple TV.
The functionality has been working fine throughout the OSX iterations; then came Mavericks.
Now my iTunes library will not sync with Apple TV3, nor will my iPhone 5/iPad 3 wirelessly sync with my iTunes library.
For some reason since upgrading to Mavericks the thing wont work under normal boot.
Restarting in Safe mode solves the problem. Assuming it was some erroneous configuration i went through troubleshooting steps to try and resolve it.
First i uninstalled any third party apps.
Then i repaired, went through Maintenance and Cleaning of the system using Onyx
Then i tried manually removing third party boot kexts from the System Library and user Library
Then i tried reinstalling OSX via the recovery partition (cmd+r on boot time)
Finally i tried a full system erase and reinstall via an external bootable Mavericks USB.
After all these steps the problem persists.
There should be no hardware failure since it works fine in Safe mode and doing a clean install verifies that there are no third party conflicts with the system since iTunes was executed immediately after booting up for the first time.
This raises the concern that there seems to be some sort of system kext misconfiguration by the Apple engineers.
When executing iTunes the following errors are being displayed in the system log (via Console):
22/07/14 20:09:41,949 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 1
22/07/14 20:09:41,954 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 2
22/07/14 20:09:41,958 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 3
22/07/14 20:09:41,962 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 4
22/07/14 20:09:41,966 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 6
22/07/14 20:09:41,970 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 7
22/07/14 20:09:41,974 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 8
22/07/14 20:09:41,978 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 9
22/07/14 20:09:41,982 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 10
22/07/14 20:09:41,987 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 11
22/07/14 20:09:41,991 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 12
22/07/14 20:09:41,995 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 13
22/07/14 20:09:41,999 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 14
22/07/14 20:09:42,004 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 15
22/07/14 20:09:42,008 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 16
22/07/14 20:09:42,012 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 17
22/07/14 20:09:42,016 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 18
22/07/14 20:09:42,020 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 19
22/07/14 20:09:42,024 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 20
22/07/14 20:09:42,028 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 21
22/07/14 20:09:42,032 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 22
22/07/14 20:09:42,036 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 23
22/07/14 20:09:42,041 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 24
22/07/14 20:09:43,034 mDNSResponder[57]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F91A980CD60 Christophoross-MacBook.local. (AAAA) that's already in the list
22/07/14 20:09:43,034 mDNSResponder[57]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F91A980D1F0 2.0.6.6.4.5.E.F.F.F.2.1.3.2.2.0.0.0.0.0.0.0.0.0.0.0.0.0.0.8.E.F.ip6.arpa. (PTR) that's already in the list
22/07/14 20:09:43,034 mDNSResponder[57]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F91AA016F60 Christophoross-MacBook.local. (Addr) that's already in the list
22/07/14 20:09:43,034 mDNSResponder[57]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F91AA0173F0 5.1.168.192.in-addr.arpa. (PTR) that's already in the list
22/07/14 20:09:43,088 com.apple.usbmuxd[42]: LOCKDOWN_V2_BONJOUR_SERVICE_NAME is _apple-mobdev2._tcp,921707f2
22/07/14 20:09:43,140 xpcd[196]: restored permissions (100600 -> 100700) on /Users/christophoros/Library/Containers/com.apple.MediaLibraryService/Container.plist
22/07/14 20:09:43,466 com.apple.SecurityServer[14]: Session 100020 created
I hope someone came across a similar issue and has some light to shed on the matter.
This has been ongoing since Mavericks came out.
Thanks for reading through

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own"

Exchange Sync Not Working After Addition of New DC

We have several Iphones in my business that all sync Mail/Contacts/Calanders over the air. Everything had been working fine, until I installed a new Domain Controller to the domain (details below). I am sure it is just a small issue that is being overlooked, but so far it eludes me.
What we have (our environment)
*Exchange 2003 SP2 on a Win 2k3 server - we use OWA and Activesync - all on one server, NO frontend/backend setup.
*Original DC - Win 2k3 server with DNS and DHCP
*New DC added - Win 2k8 r2 with DNS and DHCP
The Domain Controllers Both replicate all information without errors and nothing has been changed on the exchange server prior to the addition of the new DC and the sync issues.
I am hoping someone could help guide me in the right direction here and maybe help me find the missing piece of the puzzle.
Thanks to all in advance!

Problem Solved.
After struggling with all the potential problems that a new AD/DNS/DHCP server could pose to my Iphone active sync, I then started checking my exchange server settings from top to bottom and found in the Virtual Directory I created for active sync, under the directory security tab and in the Auth and access control section that somehow the basic authentication check box was unchecked and the domain wasn't set.
How and when or if these settings changed is unknown to me, but the problem did not present it self until after I added the second Domain Controller to the environment.
Oh well, all is well now.

IPhone sync not working after upgrade to 2.02

Hi All,
I upgraded the firmware to 2.02 this morning, and now iTunes will not recognize my iphone when trying to sync. The phone appears in the itunes interface, but everytime I try to sync I get an error message that iTunes cannot find/sync my iPhone?
Anyone experienceing this? Any help?

Had same problem....Apple tech guided me through this procedure that worked fine...
1) Sync your phone so that everything on your computer is as it should be.
2) RESTORE phone to factory settings. This is a choice in iTunes under the Summary tab when you have your iPhone device selected.
3) During this procedure you will be asked if you want to SET AS NEW PHONE. It is important to select YES to this option. This procedure takes some time...15-30 minutes
4) Set up your options for syncing from iTunes under the Info tab. If you change any settings here and ALLOW it, syncing will automatically happen. Make sure your calendar is being synced.
5) Check out the results...should be good.....I needed to sync a number of times to get everything back to normal.
6) Since doing this, the calendar syncs as it should and did before the upgrade, alone with everything else I want to sync.
Good Luck

Wireless not working after reboot

I am new to Arch. I recently installed it on my system and everything was working find until I rebooted. My wireless driver just seemed to have stopped working, yet it can detect the networks in my area. I just can not connect to them.
When I use an external wireless card I can connect just fine though.
I have done a lot of research, looked at a lot of posts, but I can not figure out how to fix this problem. It makes no sense.
I tried using wicd, and like everything else it picks up the network but I can not connect to it.
Here is the output of
ip link
Not sure if it is of any help or not, but meh...
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp1s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT qlen 1000
link/ether 88:ae:1d:90:b3:c3 brd ff:ff:ff:ff:ff:ff
3: wlp2s0: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN mode DEFAULT qlen 1000
link/ether 70:f1:a1:4f:26:0f brd ff:ff:ff:ff:ff:ff
8: wlp0s29u1u1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DORMANT qlen 1000
link/ether 00:22:3f:f9:6f:21 brd ff:ff:ff:ff:ff:ff

Welcome to the Arch forums max00355!
So you are having wireless issues. Typically when you find you have a problem with a particular piece of hardware, it is probably good to take a look at what kind of hardware you have and provide that information. In this case, it sounds like it is your internal wireless card, so presumably a pci device. So you should use the command below to find information about what kind of card you have.
$ lspci -vnn
Ideally, it would be good if you didn't post the whole output, as there is a lot of irrelevant info there. So just paste the part that relates to your wireless card.
Then, it also would probably help if you provided some detailed information about the network to which you are trying to connect. We don't need your ESSID or passkey or anything. But it is probably important to at least give an indication of what type of security is at play here (ie. wep, wpa2, etc.).
Also, when you have wireless issues, it is often very good to go back to the most basic of tools to see if you can get those working. Then you can at least get an idea of either what step is going wrong, or if it might happen to be an issue with the network management tool you are using. So see if you can get wpa_supplicant/wpa_passphrase and dhcpcd working (or iw/iwconfig instead of wpa_supplicant if you are using wep).
Finally, I would like to commend your use of code tags. That is certainly very impressive for a brand new forum member!

Himachi not working after reboot windows 10

2 of my cleints decided to upgrade their pc's to windows 10. After doing so they can no longer browse the remote server at their office location. If I uninstall himachi and reinstall it works but as soon as i reboot it goes back to being unable to ping or browe file shares. I was able to get ping working again by going onto the server and changing allowed connections in himachi details to all from these 2 clients but i still cant browse. Everyone running windows 7, 8 or 8.1 can still browse the file shares without a problem. any ideas?

Hello, I just tried some things with the laptop of one customer. Yes, they are using wifi. However I don't think it's related. What I tried: uninstalled Hamachi againdisabled the wifi-hardware in the device managerconnected UTP-cable to the machinereinstalled hamachiHamachi worksrebootHamachi doesn't work anymore Hardware: laptop is a lenovo thinkpad T510Wireless is a centrino Wireless-N 1000NIC is Intel 82577LM gigabit network connectionLogmein was already installed before the upgrade Clients are connected to multiple hamachi-networks.One of the clients gives error towards a windows10-device: 'peer changed its key'I don't know if this is related ...

User Profile Sync not working after March CU

It appears that since installing the March CU for Sharepoint 2013, the user profile service is no longer working correctly. The status for user syncronization is always in a "Stopping" phase and the event logs are reporting the following every
hour... Do I have to take out the entire service and reinstall it, or is their a way to fix it?
Log Name:      Application
Source:        FIMSynchronizationService
Date:          3/28/2013 1:40:05 PM
Event ID:      6324
Task Category: Server
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      xxxx.xxxxxx.com
Description:
The server encountered an unexpected error and stopped.
"BAIL: MMS(2072): sql.cpp(8490): 0x80231334 (The sql connection string has unsupported values.)
BAIL: MMS(2072): sql.cpp(8533): 0x80231334 (The sql connection string has unsupported values.)
BAIL: MMS(2072): server.cpp(260): 0x80231334 (The sql connection string has unsupported values.)
BAIL: MMS(2072): server.cpp(3860): 0x80231334 (The sql connection string has unsupported values.)
BAIL: MMS(2072): service.cpp(1539): 0x80231334 (The sql connection string has unsupported values.)
ERR: MMS(2072): service.cpp(988): Error creating com objects. Error code: -2145184972. This is retry number 0.
BAIL: MMS(2072): clrhost.cpp(283): 0x80131022
BAIL: MMS(2072): scriptmanagerimpl.cpp(7670): 0x80131022
BAIL: MMS(2072): server.cpp(251): 0x80131022
BAIL: MMS(2072): server.cpp(3860): 0x80131022
BAIL: MMS(2072): service.cpp(1539): 0x80131022
ERR: MMS(2072): service.cpp(988): Error creating com objects. Error code: -2146234334. This is retry number 1.
BAIL: MMS(2072): clrhost.cpp(283): 0x80131022
BAIL: MMS(2072): scriptmanagerimpl.cpp(7670): 0x80131022
BAIL: MMS(2072): server.cpp(251): 0x80131022
BAIL: MMS(2072): server.cpp(3860): 0x80131022
BAIL: MMS(2072): service.cpp(1539): 0x80131022
ERR: MMS(2072): service.cpp(988): Error creating com objects. Error code: -2146234334. This is retry number 2.
BAIL: MMS(2072): clrhost.cpp(283): 0x80131022
BAIL: MMS(2072): scriptmanagerimpl.cpp(7670): 0x80131022
BAIL: MMS(2072): server.cpp(251): 0x80131022
BAIL: MMS(2072): server.cpp(3860): 0x80131022
BAIL: MMS(2072): service.cpp(1539): 0x80131022
ERR: MMS(2072): service.cpp(988): Error creating com objects. Error code: -2146234334. This is retry number 3.
BAIL: MMS(2072): service.cpp(1002): 0x80131022
Forefront Identity Manager 4.0.2450.49"

I had rebooted days ago... I have rebooted a couple of times today before posting here... Didn't help...
I found a procedure on another link that looked like it would reset the syncronization database, but that doesn't appear to have worked out any better. The procedure was a follows:
$syncDBType = "Microsoft.Office.Server.Administration.SynchronizationDatabase"
$upaSAType = "User Profile Service Application"
$syncDB = Get-SPDatabase | where-object {$_.Type -eq $syncDBType}
$upa = Get-SPServiceApplication | where-object {$_.TypeName -eq $upaSAType}
$syncDB.Unprovision()
$syncDB.Status = "Offline"
$upa.ResetSynchronizationMachine()
$upa.ResetSynchronizationDatabase()
$syncDB.Provision()
restart-service SPTimerV4
This appears to have completely reset the syncronization database to the point where I don't even see tables and views any more in that database. That sounded good, but the "User Profile Synchronization Service" wont start and it doesn't appear to be able
to provision the database. I am trying to start the service using the farm account and I know the password is good...

IPhone calendar sync not working after upgrade to 9.2(61)

I updated my iTunes software and now the calendar on my iPhone won't sync properly.
When I change an event on the iPhone and then sync, it doesn't update in the calendar on my computer and it changes the event back to where it was before I changed it.
Any suggestions would be greatly appreciated!!
Margie

Had same problem....Apple tech guided me through this procedure that worked fine...
1) Sync your phone so that everything on your computer is as it should be.
2) RESTORE phone to factory settings. This is a choice in iTunes under the Summary tab when you have your iPhone device selected.
3) During this procedure you will be asked if you want to SET AS NEW PHONE. It is important to select YES to this option. This procedure takes some time...15-30 minutes
4) Set up your options for syncing from iTunes under the Info tab. If you change any settings here and ALLOW it, syncing will automatically happen. Make sure your calendar is being synced.
5) Check out the results...should be good.....I needed to sync a number of times to get everything back to normal.
6) Since doing this, the calendar syncs as it should and did before the upgrade, alone with everything else I want to sync.
Good Luck

Push notifications/Sync not working after NK1

After the NK1 update my battery life has improved slightly, but I am no longer getting Push notifications from any google services.
In order to get messages or emails I need to manually go into the Hangouts or Gmail apps and refresh them. Sync is turn on for Google, and both apps have notifications turned on. I have already cleared the data from the apps and restarted the phone multiple times.
Any suggestions? Anybody else with the same problem? Thanks in advance

There are hundreds or people wih this exact same problem and apple has no interest in fixing it or publicly giving and answer to the issues.
They Botched this release big time. I look forward to having tp wipe my 64gb iPad and start from scratch. Oh boy do I!!

Caller id not working after syncing my iphone to my pc?

caller id not working after syncing my iphone to my pc?

Syncing with iTunes has nothing to do with this, especially when not syncing contacts with a supported address book app on your computer which very few Windows users seem to be inclined to do.
Caller ID is not working in which way?

Syncing not working after rebooting PC

Similar Messages

Maybe you are looking for