Syncing Problem after new OS download

I downloaded the new OS and now my phone is over capacity, when it wasn't before the download. Now Im over 20 GB because the "other" portion. I can't figure out where the extra GBs are coming from or how to fix it. Does anyone know what I should do without without deleting my music or apps?

First, do you have the original disks that came with the Mini? You stated that you tried "black" Tiger disks. Depending on your Mini's version, it could have shipped with 10.3.7, 10.4, 10.4.2, 10.4.5, 10.4.6, 10.4.7, 10.4.8, 10.4.10, 10.5 or 10.5.6
Let's say your Mini shipped running 10.4.5; Black Tiger 10.4.0 could not be used for the install.
Download and take a look at the Mini section of Mactracker http://mactracker.dreamhosters.com/ for all Mini information.

Similar Messages

New Outlook sync problem after update!!!

I had the 'original' Outlook sync problem, which went away after the iTunes update to 7.3.1, but now, after the iPhone update last night, I have an entirely NEW Outlook sync problem!!
When I sync the iPhone, right when it gets to the 'syncing contacts' part (that you see in the top box/window in iTunes) I get an error message that I haven't seen before. It says "AppleMobileDeviceHelper has encountered a problem and needs to close..." and it gives me the option to send an error report. I dismiss the error box, and the sync process hangs, and iTunes becomes unresponsive.
If I open Outlook, the two Apple sync oblects are still enabled, and get no error message. If I re-open iTunes and try to sync again, it only syncs iTunes content, and never even tries to sync my contacts or calendar.
Anyone having anything similar since last night? The only thing different is the iPhone firmware update.

I just cancelled the sync by using the slider. I didn't realize I could do that. The phone seems fine. I may try it again and see what happens.

Cured a sync problem after upgrade 10.5.1.

Since the update of OS X.5.1 and iTunes 7.6, I could no more sync :
iSync crashed, dot mac sync event did not register again my macbook (I deleted all the machines registered from another mac), and I could not sync my iTouch via iTunes...
This is solved now and described at http://discussions.apple.com/thread.jspa?threadID=1380833&tstart=0
Hope this help.

Will try installing OS X 10.5.1 again from the downkoad that you recommended. Won't be able to do this untill after the New Year but I'll let you know if this helped. I had another problem after he 10.5.1 upgrade and that was that the Security update 2007-009 also refused to install. Could this be related too the problems with Disk utility and the permissions problems.

Strange Calendar sync problem after migrating to iOS5

Hello all,
I posted my problem as an "me too" reply to somebody else's thread but think it got a bit lost there.
Since I can't solve this problem I decided to make a new thread.
The problem:
After upgrading my iPhone4 to iOS5 I have a strange calendar syncing issue such that existing entries from one calendar (I've got two, see below) are duplicated on the other .... but only on the iPhone, not on the calendar server (Lotus Notes) itself!
As I couldn't find a normal solution to this problem (already removed the complete Lotus Notes traveler account from my iPhone and reinstalled it again, to no use: the duplicates pop up again) I finally decided to start removing the duplicate entries on my phone. To my surprise however they popup again!!!!!
I added a new entry to the original calender to see whether that one would popup in the other as well but this didn't happen.
It looks to me it must be something wrong on my iPhone as the "duplicates" do not show up in the calender database on the server (using Lotus Notes PC client) nor its replicas.
The configuration:
I sync with two calendars on my iPhone:
- gmail calendar for my private
- lotus notes server (traveler exchange) for my work.
The gmail calender also syncs with my desktop client (outlook 2010) via a small application "gSyncit".
This all worked like a charm on iOS4.
No matter where I modified, deleted or added entries (not only calendar, also contacts and mail) it all stayed perfectly in sync!
Does anybody out here noticed the same and/or has a solution to this?
BTW: I haven't activated iCloud for the calendar/mail/contacts (yet) ...

OK,
I found out what was wrong myself.
In the end it turned out that it had nothing to do with the iOS5 upgrade itself.
In case somebody else stumbles accross this very same problem, here's what was going on:
- Within the latest lotus notes client (on PC) the user has the possibility to display (read-only) external calendar contents (e.g. google's calendar).
- When setting this up you need to supply your external calendar's login/password information and next to that
- also have the possibility to select "View this calendar when offline or on a mobile device"
It was this setting (which I probably accidentally enabled) causing the "issue". Deselecting this option made my duplicate entries disappear on my phone.

Skype problems after New update

Hello i was never got problems in skype.This is the first time... After the new update it's updated normally and restarted i signed in and for 1 minutes all normal , after it started to bug the grapics for example the chat messages are showed each in other ,two messages or more in one message and it's laggs , not only with chat is the problem with everything what i open in windows after new skype update.... if i close skype with quit skype everything is working fine.If i click on for example friends on skype half shows the friends half the recent and if i scroll down show one of my friends in list bugged in.I think i can't even tell how looks like if i minimalize a part of skype is on my wallpaper still bugged like v**it.I tryed to reinstall serval times with older versions and with newest versions but the older version's installers doesn't work because show an error messsage:Can't communicate with the server.After reinstalling the newest version i click one skype one of my friends and shows the following error message:Not enough storage to process this command.And the chat windows appears still like v**it.Web skype client works fine i don't know the PC versions of skype why doesn't work please help me.It's urgent. PS:I looked and my ram is not full ,on disk i have 40gb on C: and 71gb on D: Pc specs:Name:Asus EEE Pc 1005HGO/1005HBO1gb ram.Intel Atom 1Core 1.66ghzIntel GMA 945 140GB HDD If you need more info i will send.Thanks for help. 1gb ram

Suzi.H wrote:
Hello, my skype ( downloaded from windows store ) is asking for update..In the store it won't show up in the updates, opening the app only "saying" you own this app..No any option to update..I uninstalled and re-installed it but still giving me the same message: It won't log me in because i need to update...Can't do it anywhere though...Very disturbing!! I updated my windows nd restarted the laptop and everything i can think of...The "modern" Skype from Windows store was disabled on July 7. http://blogs.skype.com/2015/06/11/a-more-efficient-skype-experience-for-your-pc/ The only Skype application you can use now in Windows 8/8.1 computers is Skype for Windows Desktop version. You should download and install this Skype version: http://www.skype.com/en/download-skype/

Sync problems with new 4.3 update

I have just updated my iPhone 3gs and now I have sync problems with itunes. Eveytime I try and sync my playlist or any music to the iPhone it end up with a spinning beach ball after a couple of tracks.
Has anyone else had this problem?
I have reset my iPhone a few times now since the update but it doesn't resolve the matter.
Please help.
Kind Regards
Alan

Sorted this myself eventually. just factory restored my iPhone via iTunes. working now!

I'm having syncing problems after I upgraded my iphone 4 to ios 5 !!

Yesterday I went to a cellular shop and asked to upgrade my iphone 4 to ios 5.
Now that my phone is upgraded, I plugged it into itunes at home.
I was trying to sync all the applications and the songs and the photos.... to my phone but each time the syncing starts, after a few seconds it stops immediately without syncing anything !
Any ideas ???

same problem here!!!!!!

Can't connect to iTunes after new iOS download

Can't connect to iTunes after new iOS download

Hi,
how exactly did you do that?
I have the same problem, I tried everything (including upgrading my macbook pro to os x yosemite),
but my iPhone 4S still won´t connect.
Care to share how you resolved it?

Apple TV - Syncing Problems After purchasing TV season on ATV

There appear to be numerous issues with ATV and syncing. However, I've yet to find anyone requesting assistance with my particular problems:
1. I purchased a season of television episodes with my iTunes acct. on ATV. Now my MacBook fails to sync. It's stuck on the moving striped bar indicating that syncing is just initiating. A couple of times, it's stopped and an error message appears advising me that my computer is not authorized to play the television shows that are being synced back to my iTunes. This is ridiculous as I only use one iTunes account. When I "re-authorize" my computer as the message instructs, of course I am advised that my computer has already been authorized. But the episodes still fail to sync.
2. A week before I purchased the TV episodes giving me trouble, I purchased an HD movie on ATV. That movie synced without issue back to my iTunes. But today, in the midst of attempting to deal with the sync issues on ATV, I decided to backup all of my iTunes (on my computer) on my external HD. Everything backed up with the exception of my movie. The error message I got simply said there was an error and it could not be transferred to the HD.
I am having more and more issues with iTunes and ATV. I hope Apple gets these under control. For years, I've been a happy Apple customer, turning many other people on to Apple products. But lately I've become increasingly concerned with Apple, at least regarding their online media purchasing/rental system and its compatibility with Apple hardware.
Thanks, in advance, for any assistance.

Sorry Capoho for calling you the "other person" just didn't remember you screen name but am thankful for your input. I sure hope it is only an itunes problem.
*Winston*, I tried setting up another account and brought up itunes and had to agree to terms, blah blah blah, and atv didn't come up, however, the homesharing showed up, which it doesn't on the adminstrators account (my original account) anymore, which is another issue. However, I can say this, since I have "repaired permissions" atv is acting like it did when I downloaded itunes 9.0. If I tell it to sync everthing that I wanted to it will only sync in sections. For instance, I had it sync, a couple of movies, 3 playlist and music videos, 1 tv program, and around 2000 pictures and having that download first. Yesterday, it downloaded all the pictures and then quick syncing. Last night it downloaded the tv program and the music videos and then quick syncing. It usually would download one movie and then quit syncing???? Network problem?, atv problem?, itunes Problem?
What does that mean if in the other account atv wouldn't show up?
Thanks

Sync problem after update

I installed the iTunes update and the 3.1 iPhone update. I had no problems with those at all. I then decided to sync my phone. My syncs usually only take a few minutes. My phone has been on "syncing iPhone" for at least an hour. It hasn't moved to backing up phone or anything.
I'm not sure whether to just let it continue or if there is something else I should do. The sync process is using nearly 100 percent of my cpu on the computer and I could barely get anything else open to get to this forum and type this message.
Any suggestions are welcome. Is anyone else having unusual syncing experience since the update? What will happen if it never progresses and I just need to unplug it? What will I need to do with the iPhone?
In my year of having the iPhone I've never had a sync problem before. Thanks for any help.

I just cancelled the sync by using the slider. I didn't realize I could do that. The phone seems fine. I may try it again and see what happens.

Audio sync problem after scrubbing

I'm trying to piece together some clips from a TV series called Legend of the Seeker. I'm using Premiere CS4 4.0.1, Vista Ultimate 64-bit.
Placing the hour-long video in the Source Editor allows me to play the video fine from beginning to end, but if I start scrubbing through the file, the audio unsyncs itself immediately.
Here's a screenshot of the video in GSpot:
http://img14.imageshack.us/my.php?image=premieresync.jpg
Setting IN and OUT points and then dragging a very small clip into the timeline has the same result.
Any ideas would be very appreciated.

You are actually pretty lucky to just have Audio sync problems, though I do not know why scrubbing would make any difference. With both Xvid and DivX one more often gets no Audio, or no Video.
Agree 100% on the 3rd party conversion, prior to Import into PrPro.
Hunt

Sync problems after iTunes Match update

iTunes Match has created an ongoing sync problem for me. If Match updates automatically based on songs I've purchased from the iTunes store, then I usually have no issues with the sync function. However, if I load a CD that is not in the Match library, or if I just manually do an update to Match, it causes my 160gb iPod to take 15-20 minutes to sync. Why is this happening?

I cannot sync my music but I get the message that it is connected but it is not recognised.
As advised on the error message I have reset the Nano and re-installed itunes with the same results.
Doublechecking. Have you tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

Network problem after new OSX update download

Greetings!
I've had a new (late 06) Intel 24" iMac networked wirelessly to my older iMac/cable modem/D-Link router very successfully since October. No problems and seamless set-up through the D-Link online wizard software.
Saturday I noticed an OSX upgrade to 10.4.8 (211mg) and went ahead and did the download on the wireless (Intel) iMac.
Upon restart, however, I have not been able to reconnect to my network. Airport is ON, but choosing my network name returns an error message. I have also attempted to reboot both cable modem and router, and reentered the D-Link wizard to both doublecheck the old network, and set up a new network, but saving these settings seems to fail by not recognizing the device, the router.
One of the error messages (on the wireless iMac) claims that my "settings have been changed by another application" (or to that effect) but does not give any clue as to how to determine what or where.
Also, since attempting to start from scrtch with the router, I no longer seem to get a full signal from the airport -- in Internet Connect, I no longer see a nice row of blue signal lights.
As you may be able to tell, I am new to networking, and the D-Link setup had helped make it simple -- tht is, I bumbled my way through it and was pleased with how well it worked. Now, after the OS update, not having the network is annoying -- and potentilly disastrous, as I need this machine online by Saturday.
Anyone able to give me a gentle hand, or nudge in the right direction?
Thanks in advance!
Bill
PS- Mac user since 1991! Wireless network user since only late October!

Hi again,
Sorry, BDAqua, I didn't see your note. I don't quite understand the last line of your suggestion -- a number greater than the number of CPUs? Not sure what you mean...
Phil, thanks for your note, too.
I believe the answer to your first question is 802.11g -- this is what it was set to.
After trying again to connect, using my old passwords, I was able to see the blue signal strength barss, and the Airport icon flashed on and off a few times, but ultimately the connection attempt failed again every time I tried it.
At this point, I'm no longer confident that my router is sending out a recognizable signal -- is this possible?
Also, in the dialog box in which available networks are usually shown (which has not happened since my original connection in October), today I was faced with a choice I hadn't seen before: 2WIRE736 -- is this likely to be someone else's network (a neighbor's)? I was wondering -- I'd never seen that one before. However, my own network names do not show up for choosing, and when I use Internet Connect to request them (and add WPA Personal and passwords), the connection appears to fail immediately.
At this point, should I attempt an OSX reinstall? Or has something I described made some sense for you?
Again, still very appreciative of all your help and patience with my ignorance.
Bill

Sync Problems After Installing Vista Service Pack 1

I just installed Vista service pack 1. Hotsync ceased to work. So, after checking Palm online help, I downloaded and installed Desktop 6.2 and Hotsync 7. The instructions said not to uninstall my previous version of Desktop 4.2 and Hotsync 6.01. After completing the installation, I find that my data had not been moved to the new location and that some Hotsync items had changed such as Quick Intall to Install. And, I still can't Hotsync. So, here's a series of questions:
How can I get my data over to Desktop 6.2?
Do I want to move the data over or should I reinstall Desktop 4.2? (I use an XP machine to print my schedule and usually simply copy the user folder from the Vista system to the XP system. There's no Vista print driver available for my hp printer.)
Is Palm trying to become Microsoft by changing where they store information to the confusion of a power user?
Any and all help would be appreciated.
Post relates to: Palm Vx

The version 6.2 of Palm desktop does not support your Vx.
Click here for the support page for 6.2; http://www.palm.com/us/support/downloads/windesk62.html
The only handhelds supported are Palm TX, Z22; Tungsten E2.
You will need to install the version that is on the CD that came with the Vx. You will need to "clean" uninstall Palm desktop on the Vista PC in order to re-install the older version of Palm desktop.
First thing to consider is, where is the current data. On the device or in the PC?
If you have the data in Palm desktop 6.2, do an export of the data for backup. After the re-install of the older palm desktop, import the data for each category. Since you are still using the XP PC and has data on that system, you can export the data from that PC.
In Vista, the userfolder is in documents-palm os desktop. One caveat here, the data format in the 6.2 user folder is not compatible with the data format in earlier versions of Palm desktop so you cannot copy and paste the entire user folder into the older version of Palm desktop.
Here is a procedure for backing up your data.
The best way to preserve your data is to export the data in each category in Palm Desktop to a seperate folder on your PC.
Create a new folder on your PC somewhere that is convenient. Name it something like Palm Desktop Data. Click on the link below and follow the instructions on that page for the export procedure.
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=28734
Make sure you select all for the range in the export window.
With the data saved in the folder you created, make a copy of that folder and save to a flash drive, cd-rw or external hard drive.
Anytime you make a change in Palm Desktop, export the data that was changed to that folder and save again to the external media.
With this process you can always import the data back into Palm Desktop anytime you have a problem with the data in Palm Desktop or if your computer/hard drive/device crashes.
To do the "clean" uninstall on the Vista PC, here are the instructions.
You should first make a copy of your data to have just in case something
happens. You can find your data files by going to Start --> Documents -->
Palm OS Desktop. Highlight your Palm Desktop username and right click and
copy. Then go to your PC desktop right click on a blank spot and select paste.
Disregard the first step above because your data is on the XP PC and we are just going to import the data.
Now you want to uninstall Palm Desktop and remove everything that has to do
with Palm Desktop from your computer.
Go to the following locations on the PC and delete the folders listed below.
C:\Program Files\Palm or Palm One
C:\Users\[Vista Login Name]\appdata\local\virtualstore\Program Files\Palm or
PalmOne
C:\Users\[Vista Login Name]\appdata
*Note you may need to view hidden folders to get to appdata. To do that go
into your control panel and open folder options. Go to view tab and uncheck
hide hidden files.
Once this is done you will need to delete some registry keys from your PC Operating System.
Word of warning, going here and deleting the wrong thing can cause your PC
from starting up, crashing and deletion of programs and data. If you feel
you are unsure of yourself, see if you have a friend that can help you or a
PC technician that you can pay to help you. This procedure will show them everything they need to delete. To make sure we have a good copy of the current registry, we need to do a backup of the Registry.
Go to start on the PC, in the search field type "regedit.exe" without quotes.
Highlight COMPUTER, go to File --> Export. Should pop up with a Save As box.
Current location is fine, should be in My Documents or save to a location you will remember. In the file name on the bottom type "backup[todaysdate]" i.e. backup07072008. Next, the hard part.
The easiest way to make sure your working with the correct key, highlight the key i.e. palm quick install, and press delete on your keyboard. It will ask you, are you sure. Say yes. Do the same thing for all keys below.
If you make a mistake, stop what you are doing. And call a PC technician.
BUT do not turn off your computer.
The reg keys are as follows (Note: some of theses reg keys will not be here
but if they are delete them)
* HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
* HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
* HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
* HKEY_CURRENT_USER\Software\Palm
* HKEY_CURRENT_USER\Software\Palm, Inc.
* HKEY_CURRENT_USER\Software\PalmDesktopAutorun
* HKEY_CURRENT_USER\Software\palmOne
* HKEY_CURRENT_USER\Software\PalmSource
* HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
Next reboot your computer.
Then reinstall your palm desktop from the CD and do a hotsync. If it asks
you for a username and you synced your device before, put in 'test" if you
did not sync before create a hotsync name.
Post relates to: Palm i705

Sync Problem with new iPod

I am new to the iPod world, and just got my hands on an 80gig iPod video. I love it. I own a MacBook Pro 2.0, and I have iTunes 7. Now that I have told you this basic info, this is the problem I am having.
The iPod sync's sucessfully when I first connect the iPod while in iTunes 7, but after the 1st sync, lets say I download some new songs, import some new songs, or whatever, and I go to sync the iPod, it just say's "Waiting on iPod", and eventually times out. Then I unplug the iPod, plug it back in, and it sync's up all the new stuff. I would rather have it just sync up without having to dissconnect and re-connect it, but it will not. Any suggestions?
Zach

I can't help you, but I'm having a similar problem, and hopefully someone can help us both!
I bought a new 80 GB iPod and updated to iTunes 7 (from 6). The first time I connected, all the songs copied over automatically, which was fine.
However, when I later tried to disable automatic sync - which is my personal preference, because I don't want all the songs in my library on my iPod - ALL the songs I had copied to my iPod were erased, and all the settings (backlight, click wheel, etc.) on my iPod were restored to the factory defaults!
Furthermore, when I connected my iPod (before I turned off sync) for the second time, anytime I would click on "library," any playlist, the iPod eject button, or ANY button other than in the iPod menu, iTunes would crash immediately - and there would be no error message!
Someone help us! (this is all on a G5 with 10.4.1 btw)

Syncing Problem after new OS download

Similar Messages

Maybe you are looking for