Syncing video and audio

I have been syncing video and audio into a sequence and using those sequences in a new master sequence. Is that the right way to do it? Is there a way to have the video and audio in a useable clip? I could not find this information in the manual, but if I missed it can someone refer me to the chapter that covers this topic.
Thank you

you can set in and out points for both the video and audio clips in either the viewer or in the browser, then select the two, right click - merge clips (or Modify/Merge Clips if you prefer the menu.)

Similar Messages

Problem with sync video and audio

Hi
Problem with sync video and audio
1- capture video ( Telecinema dv pal)
2- conform 25 to 24
3- import timeline audio and video
4- sync
5- Link
6- make sub-clip
7- new name
---- error
Sequence Error: Unable to add clip to sequence.
Possible media limits problem in clip or sequence.
FINAL CUT PRO IS DONE.
HELP ME.
THX

exactly why are you converting 25 to 24?

How to align or sync video and audio?

In Premiere 13, once I have added a video/audio clip and then either slow down the clip or add photos in between the clip causes the video and audio to be out of sync. How does one re-align or re-sync the clip once it has been edited? Thanks

mrsndmn
On what computer operating system is your Premiere Elements 13 running?
There are several ways to avoid disturbing an existing Timeline when you are adding to it.
1. Using what are called keyboard modifiers, such as Ctrl or Alt (Windows).
2. Grouping block of clips so that the clips move together
The following video tutorial is offered for informational and not promotional reasons
Premiere Elements: Arranging clips on the Timeline using modifier keys | lynda.com - YouTube
It uses a version of Premiere Elements earlier than 13, but the principles involved are the same.
The video and audio that are going out of sync.... are they linked or grouped before the addition to the existing Timeline?
After the fact, you will need to move the Timeline components back in place.
If the video and audio are not linked or group, you can
(a) highlight the clip, hold down the Alt key of the computer main
keyboard and tap the appropriate arrow key for a 1 frame per tap nudge of the clip.
(b) highlight the clip, hold down the Shift+Alt key of the computer main
keyboard and tap the appropriate arrow key for a 5 frames per tap nudge of the clip.
Please review and consider. If questions or need clarification on the above, please do not hesitate to ask.
Thank you.
ATR

Out of Sync Video and Audio

I've got a problem. I exported my film from Final Cut Pro HD as MPEG-2 and AIFF audio with the same encoding settings. However, when I import them into DVD Studio Pro, the video is about half a second ahead of the sound, even though they are the same length. I can't re-align them, as I cannot place the video after the audio in the timeline.
Can anyone explain this at all, or help me out?
It is in sync if I import it as Quicktime movie, however, on burning the DVD the picture skips frames like crazy. However, with MPEG-2 and AIFF it is out of sync! What to do?

Welcome to the forum, John.
When you say you exported from FCP as MPEG-2 and AIFF, did you use Compressor to create both files? (In other words, did you use Export->Using Compressor from FCP?) If so, some people run into audio sync problem using the AIFF files that Compressor creates. Export the AIFF directly from your FCP project and that should cure that problem.
However...
on burning the DVD the picture skips frames like crazy.
This is possibly a related problem. Depending on the video bitrate you used, when you add uncompressed audio like an AIFF, you could be pushing the limits of what a DVD-R disc can manage. Skipping during playback is one sign of going too far. You are probably better off compressing that audio with A.Pack (DVDSP2 or 3) or Compressor 2 (DVDSP4) and using a Dolby Digital soundtrack.

Video and audio not in sync

Anybody else experiencing video & audio not in sync since upgrading to Lion? I have a MacBook Pro 15-inch, Early 2011 with
AMD Radeon HD 6490M 256 MB graphics. I mostly stream You Tube, Netflix, & news videos and occasionally watch movies I have in iTunes or on DVD, and since upgrading, I've seen out of sync video and audio in every one of these situations. Sometimes it starts out OK and then slowly deteriorates. Other times it just starts out that way and stays that way. Happens with all browsers as well as iTunes and DVD Player. Tried a few Google searches but haven't come across any postings reporting this with Lion, so I thought I would try here. Thanks for any confirmations and/or pointers to a solution if there is one.

Ahh...boom. I have it too. Forgot it was even there. I had it turned off back when running Snow Leopard since it was glitchy. Apparenty, I somehow reenabled it and wasn't even aware it was on since its volume was turned down. After disabling it, all video & audio appears to be in sync.
boom...the sound you'll hear as I nuke it from my system.
Thanks efrancis76 for figuring this out. Much appreciated!

Recording Video and Audio at Same time with simultaneous sync

I want to record a keyboard performance into garageband and at the same time record the playing of that performance with my video camera. Then I want to create a movie using the music from garageband and the video from the camera. I was thinking that if I can sync the video and audio when I'm recording the session, then that part is taken care of. Or, maybe this is easier than I think it is?
Is there a way to do this so that I can use the garageband record performance and have it synced to the video on the camera?
I don't want to use the audio from the video camera because the performance that is captured in Garageband will be much better and I can do editing of the individual notes in GB.
In the end, I just want to make a movie and/or podcast of the performance.
I'm a newbie regarding this, but I did search the forums and couldn't find anything specific. Mostly it was about importing video into GB3 and then syncing new audio. I'll basically have audio and video from the same performance in two separate locations and I want to bring them together perfectly in Garageband.
Thanks for any help you can provide.
Powerbook G4 - DVI Mac OS X (10.4.9)

Okay. I got the video and audio all together. I told you I'd link to it when it was up.
http://www.youtube.com/watch?v=FxssYpUNJm8
There's also a copy of it at http://www.myspace.com/bonjimmy/
And as a quick side comment, even though I uploaded the same video to both YouTube and MySpace, the MySpace version is much better. YouTube must do something to the video after it's uploaded.
What I learned doing this project:
I recorded the video first (which gave me the sequencing of the piano performance) and then I dubbed the audio in later. However, there wasn't a good way to sync the video and the prerecorded piano, so there are some spots where the dubbed audio vocal isn't accurate to the video. I'm not sure what the pros do for this. I was hoping I'd remember how I sang for the video but when a couple weeks go by before re-doing the audio, it's about impossible. I tried, though.
I remember working with an old 4-track and smpte to a sequencer a long time ago. With the way it is now, it's pretty cool that you can record digitally and mix and match and everything falls together perfectly as long as you have a place to match the video and the audio. It's pretty cool.
What else???
Does anyone have suggestions that would have made it better? Also, if you have suggestions on my performance or whatever, I'd love comments, but you can do that on the linked page.
Thanks again for all your help. (The point of the video is because I'm thinking about getting back out there and doing some more playing... I'm looking for a band or something else interesting...)
Powerbook G4 - DVI Mac OS X (10.4.10)

Video and audio not in sync. Other answers here do not help.

My audio and video are not in sync in many streams but some are OK.
I do not have any extensions, add-ons and I am using the default theme. I have disabled hardware acceleration. I am now running in Safe Mode and the problem persists.
The video and audio sync for the first few minutes and then they work their way futhter and further apart, usually several seconds out of sync. I don't think this particular situation has been covered in the other posts.

You can check for problems with current Flash plugin versions and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting

Video and Audio not in sync after capture

Hi there,
This is probably a common problem, I have trawled the site but can't seem to find and explanation for it.
I'm capturing vide/audio into final cut pro from my SONY DVR. The video i have streaming into the sony DVR is from a small covert video device which records video/audio onto an SD card. SO I'm running that into the DVR and then DVR is outputting that as DV PAL firewire (uncontrollable device).
I'm capturing the 40 minutes of video as one clip, and when i drag it into the timeline the audio and video are WAY out of sync. Is there a simple reason for why this is happening?
It's almost as if not capturing it right.
I hope someone can help,
Thanks in advance.
Jamie McIntyre

It is interesting that you are having this problem. I recently purchased a brand new Mac Pro (a week ago) and I am using Premiere Pro and it is doing the exact same thing. I mean this video and audio is REALLy out of sync. I tried capturing an hour at a time, and 30 minutes at a time. Still, no luck. I was debating on getting Final Cut, but after reading this post I am rethinking not only Final Cut, but using Apple all together. Part of me thinks that it is not a Premiere or Final Cut problem but a Mac OS problem. But hey, what do I know. I only edit for a living.

My Video and Audio are not syncing up after importing

I am trying to edit a few Ipad Clips in premier pro. My video and audio are not syncing. They are .mov lower resolution from the ipad. The original audio is fine - but after I put in a sequence the audio is off a few seconds (ahead). I did not add any affects or change anything. Please advise?
Thanks for any help in advance.
Allison

Premiere does not work well with variable frame rate video which, I expect, the ipad produces, You might have to convert the footage before you import it into Premiere. Do a forum search for variable frame rate, there are a lot of posts.

I am trying to edit a .mov video in Premiere Elements 12, but the video and audio do not sync. They work fine when played in Quicktime.

Hello,
I am trying to edit a .mov video in Premiere Elements 12, but the video and audio do not sync as soon as I load it into the program. It appears to work fine in Quicktime.
Thanks in advance.

mbgoodwi
Thanks for the reply. This is the plan.
Open Premiere Elements 12/12.1 to the Expert workspace.
In the Expert workspace, go to File Menu/New/Project and Change Settings.
In the Change Settings area, select the project preset
NTSC
AVCHD
AVCHD LITE 720p30
OK out of there. In the New Project dialog that appears, note that it has your new project preset named.
Be sure to put a check mark next to "Force Selected Project Setting on This Project". And, then OK out of there.
Back in the Premiere Elements 12 Expert workspace, use Add Media/Files and Folders to bring your video
into Project Assets. From Project Assets drag your video to the Timeline Video Track 1/Audio Track 1.
Is there an orange line over the content in the Timeline. See screenshot for orange line to which I am referring.
There should be no colored line over the content if the project preset matches the video properties. But, if you do see
that orange line, then render the Timeline content by pressing the Enter key of the computer main keyboard or press
the Render button above the Timeline.
Do your video/audio now play back in the Edit area monitor in sync?
Please let us know the result, and then we will decide what next.
Thanks.
ATR

N95 Recorded Video: Video and audio is out of sync

Audio and video is out of sync when I play videos recorded with N95 on my PC. If have used different PC applications to play the video, but all exhibit the same problem.
In the beginning of at video it seems that the audio is about 400milliseconds ahead of the video - you hear the sound first. The different in audio and video is not constant. In a long video (30-50minutes) it is quite unpretictable how video and audio is out of sync in the end.
To experience the problem yourself record a long video sequence with a N95.
1 .Record something where it is easy to see if video and audio is in sync.
2. Transfer the recording to a PC.
3. Play the recording using VLC (www.videolan.org)
Another way to experience the problem is to convert the recording to AVI format at play it in MediaPlayer or WindowsMovieMaker. To convert a N95 video recording to AVI format use Mp4Cam2Avi.
http://sourceforge.net/projects/mp4cam2avi/
The video recording settings I use on my N95 are:
Best Quality
No Video Stablisation
Firmware version 21.0.0.16.
I think the video quality of N95 recordings is quite good, so I would really like to be able to view and edit the recorded vidoes on my PC.

28-Mar-2008 09:50 PM
el_loco wrote:
I've seen this issue, but it's not so critical for me. It doesn't happen 100% of the time or in most situations it's very hard to see.
You can edit videos on your PC, just converting them to AVI then using any Video Editor on the PC.
Yes while editing separate the audio channel from the clip and reinsert at the begining of the clip. This will minimise sync issues.To get accurate sync increase the timeline so that you are able to the see audio squiggles as a waveform.
If my post has helped you please click the white star on the right

I am trying to use the auto audio-sync feature. When I select the video and audio clip to be synced FCPX says its syncing them and then once finished (at 100%) no compound clip is created and the video and audio file do not sync. Any help is appreciated.

I am trying to use the auto audio-sync feature. When I select the video and audio clip to be synced FCPX says its syncing them and then once finished (at 100%) no compound clip is created and the video and audio file do not sync. Any help is appreciated.

Hi
In iMovie'11 (version 9.0.x)
on top menu row - Apple/iMovie/File/Edit/Cut (Can vary dep. on language - in Swedish Apple/iMovie/Arkiv/Redigera/Klipp . . . )
down Cut menu - Slow playback/Raspid Playback/Re-play in Slow Motion and onvards
Here one can select the Pre-Set speeds
Are you familiar with getting 'inspector' to run?
No - but I guess that Double Click on clip/sequense or ctrl-Click on it might open it.
Yours Bengt W

I have a clip with synchronized audio. When I trim a section of video it does not trim the audio. How do I trim both video and audio so that the clip remains in sync?

Why is FCPX not allow me to cut both video and audio tracks at the same time?
My separate synchronized audio does not trim when I trim the video. They are connected and synchronized.

fulei wrote:
The audio track does not edit along with the video. They go out of sync
Sounds like a different problem than your trim problem in the first post. If your problem is they drift out of sync, we'd need to knoow more about the project and clip properties – including how the audio file you're syncing to was created.
Russ

Video and audio goes out of sync when imported into Premiere

I have some videos ripped from some DVD that an acquaintance made, with an open source program called HandBrake, with the default "high profile" settings. When I play it both in VLC and in Quicktime, it plays just fine, but when I import it either in Premiere or in After effects, the video and audio goes out of sync (the video ran faster than the audio and when the video stops, the missing audio is trimmed).
Video info according to Premiere (in Spanish but you may get the meaning).
Ruta del archivo: [...].m4v
Tipo: Película MPEG
Tamaño de archivo: 667,7 MB
Tamaño de la imagen: 720 x 480
Profundidad en píxeles: 32
Velocidad de fotograma: 29,97
Formato de audio de origen: 48000 Hz - comprimido - Estéreo
Formato de audio del proyecto: 48000 Hz - Punto flotante de 32 bits - Estéreo
Duración total: 00:30:35:15
Velocidad media de datos: 372 KB / segundos
Proporción de píxeles: 0,8889

"HandBrake, these days, is almost entirely about H.264 video, aka MPEG-4 Part 10. HandBrake is migrating to quality-based encoding."
Hmmm. I use HC Encoder to make my DVDs because it's the only free encoder I've found with the much more professional Constant Q encoding option. But HC Encoder doesn't do HD sources for Blu-ray, so I've been wondering if I'd be stuck with the lame-*** consumer CBR and VBR options most encoders provide (including Adobe - hint, hint) when I eventually start working in HD. This is a very interesting program, Handbrake. I will have to check it out.

Video and Audio 2 frames out of sync: DVCPRO HD 720p60. Can you help me pl?

Hi,
I'm capturing DVCPRO HD video 720p60 [shooted with a Panasonic VARICAM (AJ-HDC27)].
I'm using a Panasonic AJ-HD1200A videorecorder (by the Firewire port):
on the Final Cut Pro (5.1) timeline, video and audio are out of sync (audio comes two frames before video). Why?
Can someone help me please?
Thanks a lot.
ste
Message was edited by: stebianchi
Message was edited by: stebianchi

This is normal when capturing DVCPRO HD via firewire. Happens to me all the time. I simply slip the audio back two frames when I drop them into the timeline. Only way to fix this is to get an HD capture card like the Kona LHe or Decklink Extreme and capture the footage via HD SDI as DVCPRO HD. Doing that will eliminate the sync issue.
It is all FIREWIRE's fault...
Shane

Syncing video and audio

Similar Messages

Maybe you are looking for