Syndicator Preview tab values are not same to Syndicator Output file

HI All,
I am struct with the following issue, can any one give there inputs where the issue is:
In the MDM Syndicator preview tab I can see the look up flat multiple table values... But in the output file I cant abel to see the entire node at all... Do I need to make some configuration?
Thanks
Rajeev

HI All,
I am struct with the following issue, can any one give there inputs where the issue is:
In the MDM Syndicator preview tab I can see the look up flat multiple table values... But in the output file I cant abel to see the entire node at all... Do I need to make some configuration?
Thanks
Rajeev

Similar Messages

  • Forms values are not displayed correctly

    This is happening on the client view. I have a custom form and after some Windows updates on user's laptop, the text field values started stopping to display in the form. If I click on View mode then the text values shown and change back to Edit the form
    now text values show up in the text field.
    Another thing is when trying to print the view out, text values are not shown up at all. I tried to upgrade user to IE11 and same issue. Using Firefox then text values are shown in print preview but not in Editing. I don't want users to use different browser
    rather than IE.
    Any thoughts on this would be much appreciated.

    Hi,
    Since the issue happens after some Windows Updates, I would suggest the user log on another machine and see if the issue persists. If the issue only happens on this laptop, you can manually uninstall the update patch you doubt to test
    the issue. Go to Control Panel->Programs and Features->View installed Updates->”right click” and “uninstall”.
    Meanwhile, add the SharePoint sites to a trusted zone in IE settings.
    Thanks.
    Tracy Cai
    TechNet Community Support

  • Excise Values are not flowing from J1IJ to VF01

    Hi All,
    I am facing the problem in Invoice to Customer(from Depot). Excise Values are not flowing from J1IJ. I maintained Alt Cal type as 356 in Pricing procedure for Excise condition types. Even though its not flowing. I am using Tax Procedure TAXINN.
    I have gone through SDN, everybody is suggesting about 356 routine.
    My scenario is STO from Plant to Depot and Sale from Depot to Customer.
    ME21N->VL10B->VF01(Proforma)->J1IIN->MIGO->VA01(from Depot)->VL01N->J1IJ(Depot Excise)->VF01(Invoice to Customer)
    In J1IJ, excise values are coming but in VF01 it is not coming.
    Kindly help me.
    With Regards
    Azeez.Mohd

    Hi,
    in j1ig initial screen which excise group/series group i need to enter
    is it of supplying plant or depot --- Enter Your Excise group
    If i enter material document no say 5000000265 (corresponds to migo-101 at depot )& year
    it'm getting error message excise invoice already exists for5000000265 --> Check the Year of material document
    You can also use the Excise Invoice Details tab
    Enter Vendor's Ex.Inv.No. , enter your STO's Excise Invoice No. and Click on Own factory and enter factory's Series Group in n case of STO from factory,
    use Depot Excise Invoice in case of transfer from another depot
    and Excise Inv. Date
    On next screen,
    In case of non availability of Internal Excise No., select the line item and click on button. On next screen, enter Excise Inv. No., Date, Challan Qty, Excise Base value, ensure that Excise Duty rates are maintained in respective duty rates column, you can also manually enter the excise duty amount and press Enter . System will give warning messages, press Enter for each message and press Back button. System will display the excise duty amount, check the same and click on Save button.
    Hope this will resolve your issue.
    Regards,
    Krishna O

  • Excise values are not copied to Commercial invoice in trading process

    Hi All,
    I have an issue while creating VF01 the Excise condtion values (BED, AED) not copied to commercial Invoice.
    Other inputs about the scenaio:
    The process is 1Customer schduleing agreement->outbound delivery->J1IJ->commerical invoice(VF01)
    We had vendor agreement in which 3 line items were crated with qty of 500, 1000 and 1500 qty
    for the first line item when we created total cycle upto VF01 the Excise values are copied where as for the 2nd and 3rd line items the excise values are not being copied to VF01. Here note the only difference beween these 3 line items is mateial code is different.
    J_1irg23d table is showing the BED and AED condtion values for the 2nd 3rd line item aswell.
    Checked PO also for the 2nd and 3rd line item showing the Excise tab in which Excise values are showing.
    MIGO and MIRO were created with correct PO only
    We maintan the condtion reocrds for BED and AED as 100%, what ever the Excise values maintained in MIRO the same will be copied to VF01.
    Once again just would like to reconfrim the issue is out of 3 line items of the sheduling agreement for the first line item BED and AED are copying to VF01 where as for the 2nd and 3rd line item BED and AED values not copying to VF01.the only difference is material code between the line items.
    Please let me know if you need any further details.
    Thanks in advance.

    Thanks sir for your reply.
    have you declared the receiving plant from overseas as a Depot?
    Yes  it was defined as depo plant in configuration of plant settings.
    Actually i should have mentioend total cycle before. However, i have mentioend in my OP as
    MIGO and MIRO were created with correct PO only
    But anyway please check my total cycle as below.
    ME31L (vendor agreement)
    MIRO(customer custom vendor payment)
    MIGO(with ref Vendor agreement/PO) here the excise duties are captured as well, we will not do seperately JIIG.
    MIRO( actual vendor payment)
    VA31(customer agreement )
    VL01N(outbound delivery)
    J1IJ(with ref delivery) here we sellect the MIRO invoice
    Vf01( commerecial invoice)
    Upto J1IJ all the values calculated and copied ok. Only during VF01 the BED and AED values anot being copied. Even i tried the update button but not updated.
    For time being we are entering the BED and AED condition values into VF01.
    thanks,
    Message was edited by: surya prakash

  • Form values are not submitting to ActionForm class

    Hi All,
    I have a problem with <html:form> tag. When i am submitting the form using the submit button it is going to the Struts-config.xml file and getting the action mapping for the HazSummary.do. It is getting the HazardSummaryAction class and getting the input from HazardSummary Form class. If result is sucees it is going to the next jsp page.
    All above things are happening properly. But the form values are not getting in to the HazardSummaryForm.jav.
    Here in this case Action class is HazardSummaryAction.java, Action Form class is HazardSummaryForm.java and jsp page is Hazard.jsp.
    Here is the code for Hazard.jsp
    <html:form action="/HazSummary.do">
    <table width="100%" border="0" style="border-collapse: collapse" bordercolor="#111111" cellpadding="0" cellspacing="0">
         <tr colspan="4"><td>
         <%String jd="jmd";
         String st="closed";%>
         <input type="text" name="wkploc" value=<%=jd%>>
         <input type="text" name="hastat" value=<%=st%>>
    <html:submit property="action">
    <bean:message key="haz.save.label"/>
    </html:submit>
         </td></tr>
    </table>
    </html:form></body>
    Here is the code for HazardSummaryAction.java
    package com.prospecta.WSOProject.action;
    import java.io.IOException;
    import javax.servlet.ServletException;
    import javax.servlet.http.HttpServletRequest;
    import javax.servlet.http.HttpServletResponse;
    import javax.servlet.http.HttpSession;
    import org.apache.struts.action.Action;
    import org.apache.struts.action.ActionForm;
    import org.apache.struts.action.ActionForward;
    import org.apache.struts.action.ActionMapping;
    public class HazSummaryAction extends Action{
         public String hazstatus;
         public String workplace;
         public String prin1;
         public ActionForward execute(ActionMapping mapping, ActionForm form, HttpServletRequest request, HttpServletResponse response) throws IOException, ServletException
              HazardSummaryForm hsf = new HazardSummaryForm();
              HttpSession session = request.getSession(true);
         try{
         hazstatus=hsf.gethastat();
         System.out.println(hazstatus);
         workplace=hsf.getwkploc();
         System.out.println(workplace);
         session.setAttribute("stat",hazstatus);
         session.setAttribute("loc",workplace);
         return mapping.findForward("success");
         catch(NullPointerException nex){
              return mapping.findForward("failure");
              }catch(Exception e)
         e.printStackTrace();
         return mapping.findForward("failure");
    Here is the code for HazardSummaryForm.java
    package com.prospecta.WSOProject.action;
    import org.apache.struts.action.ActionForm;
    public class HazardSummaryForm extends ActionForm {
         public String wkploc;
         public String hastat;
         public void setwkploc(String wkploc)
              this.wkploc=wkploc;
         public String getwkploc()
              return this.wkploc;
         public void sethastat(String hastat)
              this.hastat=hastat;
         public String gethastat()
              return this.hastat;
    Here is the code for Struts-config.xml file
    <?xml version = '1.0' encoding = 'windows-1252'?>
    <!DOCTYPE struts-config PUBLIC "-//Apache Software Foundation//DTD Struts Configuration 1.1//EN" "http://jakarta.apache.org/struts/dtds/struts-config_1_1.dtd">
    <struts-config>
         <form-beans>
    <form-bean name="HazSumForm"     type="com.prospecta.WSOProject.action.HazardSummaryForm">
                   <form-property name="wkploc" type="java.lang.String"/>
                   <form-property name="hastat" type="java.lang.String"/>
         </form-bean>     
         </form-beans>
    <action-mappings>
    <action path="/HazSummary" input="/HazSumForm" name="HazSumForm" scope="request" validate="false" type="com.prospecta.WSOProject.action.HazSummaryAction">
                   <forward name="success" path="/HazardSummary.jsp"/>
                   <forward name="failure" path="/Hazard.jsp"/>
              </action>                                         
         </action-mappings>
         <controller processorClass="fr.improve.struts.taglib.layout.workflow.LayoutRequestProcessor" locale="true"/>
         <message-resources parameter="com.prospecta.WSOProject.ApplicationResources"/>
         <plug-in className="org.apache.struts.tiles.TilesPlugin">
              <set-property property="definitions-config" value="/WEB-INF/tileDefinitions.xml"/>
         <set-property property="moduleAware" value="true"/>
         <set-property property="definitions-parser-validate" value="false"/>
         </plug-in>
         <plug-in className="org.apache.struts.validator.ValidatorPlugIn">
         <set-property property="pathnames" value="/WEB-INF/validator/validator-rules.xml,/WEB-INF/validator/validations.xml"/>
         </plug-in>
    </struts-config>
    i followed the same process for previous pages which they are working. But in this case it was not working properly.
    Please resolve this problem ....................

    Hi Sreelatha,
    When you develop any interactive form please keep in mind the below things which you need to check:
    1. The layout type of the form should be ZCI. Select it from the form properties tab in SFP t-code.
    2. In web dynpro application (in case you are using for the form), the form type should be selected as native.
    3. In the form layout insert web dynpro script using menu->utilities->insert web dynpro script.
    4. After that come out of the form and run the report FP_ZCI_UPDATE giving your form name, also select the update check box in the report.
    Once these things are done your form should work fine.
    Regards,
    Vaibhav

  • Tabstrip wizard- Protected tab titles are not supported

    Hello Experts,
    I have created a tabstrip using wizard and all the tab buttons and subscreens are working fine except for one warning message I get everytime I pust a tab. The message is
    Diagnosis
    Protected tab titles are not supported.You cannot print the title on a tab index as the tab index does not support this'.
    Procedure
    Check the screen modifications or the Screen Painter definitions of the tab title.
    When you modify the screen, do not set the INPUT attribute of the tab title to '0'.
    I tried changing the input value for the tab buttons to '1', even then its the same error.
    Anyone who has came accross such error?
    Regards,
    Ahmad
    Message was edited by: Ahmad Quraishi

    Hi,
       I think you are using LOOP AT SCREEN to set some fields in change mode( input mode ).   While do that, it is trying to set the tab titles also as input mode.   So change this to display only by setting the value to 0 for tabstrips.
    when setting to change mode, skip the tabstrips as follows
      LOOP AT SCREEN.
        IF screen-name EQ 'TAB1'
          OR screen-name EQ 'TAB2'.
          CONTINUE.
        ENDIF.
        screen-input = 1.
        MODIFY SCREEN.
      ENDLOOP.

  • While Creation Of SaleOrder Char Values are not getting saved.(V C)

    Hi SAP gurus,
    One of my client can able to create a saleorder but when we go and see in VA03 Display mode,we found Charactrestic values getting miised out.What could be the probale reasons.
    Note: I Have stimulate the required combination as per my client requirement in CU50,here i can able to indentify the Green Sign,but While Creation Of SaleOrder Char Values are not getting saved.
    Awaiting for your valuable reply.
    Cheers,
    Kumar.S

    Kumar ,
    If you assign values in classification view or configuration profile  they will become default for the product, and it willnot be changed in sales order.
    another thing if the item category is incorrect you will not get the configuration pop up at all .
    problem what i understand from your thred is at the time of sales ordeer creation there is some inconsistances in the configuration , may be some condition is not fullfilling.
    If in CU50 the result shown are error free, same configuration should owrk properly in sales configuration process, please again try to create it in sales order with same value assignment also check all the messages.
    see the result of configuration before saving the sales order , i hoep it will work for you.
    I am assuming all the things from SD are properly configured ie item catageory, varient pricing etc.
    Check and revert back.
    Regards
    Ritesh

  • Excise values are not flowing  in MIGO

    Dear All,
    I am facing a problem during MIGO.
    THERE IS STOCK TRANSFER BETWEEN 2 PLANTS AND 2 PLANTS ARE UNDER DIFFERENT COMPANY CODES.
    1 I have created a PO.
    2.Delivery through VL10D
    3.Picking-vl02n
    4.Created Bill-VF01
    5.Created Invoice and saved it
    When I am doing MIGO the excise values are not following.in migo SCREEN.I I want to know do i need to post EXCISE INVOICE and how to do the same.
    Pl let me know anything is missed out so that excise invoice is not flowing in MIGO screen.
    Regards
    Manash

    Hi,
    Have you miantained Tax code in STO ? if yes, then have you mainatained Settoff as 100% for that Tax Code in FV11 for which combination you are using
    SETOFF Must Be Maintained:-
    JMX1 --     IN: A/P BED setoff
    JEX1 ---      Ecess Setoff Sta
    HX1     IN: A/P SECess SOTot       
    If it is there please follow the Following steps for STO
    1.     Create Purchase Order(STO)  using ME21N
    2.     Create Outbound Delivery using VL10B
    3.     Create Billing Document using VF01
    4.     Create Excise Invoice using J1IIN
    5.                   GR with respect to Inbound delivery and in Excise Invoice give number of VF01.
    Hope Help U !
    Regards,
    Pardeep Malik

  • Screen values are not retained in Tcode BP, onclick of SAVE button

    Hi,
    In Tcode BP, I am selecting a Role with the Business Partner number. COMPANY CODE Push button on the Top is Enabled and Click on that.
    Enter the Company Code and provide the Account management tab by providing Reconciliation Acct 120113, Sort key as 035, Planning Group as E1. Go to Payment Transaction Tab, Enter the Payment terms as Z003, check Record payment history. Now, Click on SAVE Button on the TOP.
    The issue is that, The screen values are not retained in the Payment terms tab and Customer is not Created after saving of a BP Number which is related to a Customer.
    Regards,
    Deepthi.

    OSS Note 1254214 is applied and it is solved.

  • Updated (VORowImpl ) values are not reflected in inline POPUP table

    Hi Expert,
    Currently i am getting exception when i try to update my iterator binding,
    Here is my use case,
    I have view object displayed inside the inline popup as a table. When i modify one of the cell i am firing the value change listener and it is called the ViewObjectRowImpl class method. Inside the method i do some computation (i am executing some DB query to get back some value). After the query execution i am updating the other columns data based on the changes.
    First i have PPR the table and check out the update values. Unfortunately the change values are not reflected.
    Then i used the following code
    DCIteratorBinding itrBinding = findIteratorBinding("EmployeeVO1Iterator");
    if (itrBinding != null) {
    itrBinding.executeQuery();
    itrBinding.refresh(DCIteratorBinding.RANGESIZE_UNLIMITED);
    Now i am getting the " JBO-25003: Object EmployeeMgmtAM of type ApplicationModule is not found."
    May i know what went wrong? Am i missing anything. May i know how can i refresh the UI table based on the updated VORowImpl. Looking forward hints.
    Thanks

    Thanks Frank, Actually i am accessing the client method as follows,
    DCIteratorBinding itrBinding = findIteratorBinding("EmployeeVO1Iterator");
    if (itrBinding != null) {
    EmployeeVORowImpl employeeVO = (EmployeeVORowImpl)itrBinding.getCurrentRow();
    empoyeeVO.methodName();
    May i know what is the different between accessing the method as shown above and access via the MethodBinding?
    How about access the attribute of the View object using the above approach? i.e empoyeeVO.getName() like ....
    Also i have configure the ADF looger to finest level and found the primary reason to "Applicaiton module not found" was some entity validation. But this not always happened. Same test case works fine and fails sometimes. I am clueless. Could you please throw some light.
    Thanks
    Edited by: user1022639 on Feb 7, 2012 5:24 PM

  • AET Generated field values are not saved.

    Hi Gurus,
    I have created two AET fields on the screen (marked below) and that should store values in table CRMD_CUSTOMER_H. When I create a new service request and enter the values and save, AET field values are not saved. Again, when I edit the same service request and enter the values and save , AET field values are saved on the database.
    While  debugging  I found that, relationship BTHeaderCustExt does not exist for the first time and second time onward its appearing. Due to this, data is not being saved at first time (Line no 27 : current is empty).
    When tried to create realtionship using create_related_entity , it throwing exception cx_crm_genil_model_error.
    Please advice me the soution for the same.
    Regards,
    Anand

    there should be a context node at your view level. Please check ON NEW FOCUS method is implemented or not.
    If not, you can implement that method with below code.
        DATA: lv_collection TYPE REF TO if_bol_bo_col,
              entity        TYPE REF TO cl_crm_bol_entity.
    *   get collection of dependent nodes
        entity ?= focus_bo.
        TRY.
            lv_collection = entity->get_related_entities(
                   iv_relation_name = 'BTHeaderCustExt' ).
            IF lv_collection IS NOT BOUND or lv_collection->size( ) = 0.
              IF entity->is_changeable( ) = ABAP_TRUE.
                TRY.
                    entity = entity->create_related_entity(
                     iv_relation_name = 'BTHeaderCustExt' ).
                  CATCH cx_crm_genil_model_error cx_crm_genil_duplicate_rel.
    *               should never happen
                ENDTRY.
                IF entity IS BOUND.
                  CREATE OBJECT lv_collection TYPE cl_crm_bol_bo_col.
                  lv_collection->add( entity ).
                ENDIF.
              ENDIF.
            ENDIF.
          CATCH cx_crm_genil_model_error.
    *       should never happen
            EXIT.
          CATCH cx_sy_ref_is_initial.
        ENDTRY.
        me->set_collection( lv_collection ).

  • Parameter values are not showing in in the Organization Parameter form

    We have done a setup for an Inventory Organization.
    Everything was working fine.
    Values were showing everywhere.
    We have lot of transactions done in the org also.
    But suddenly yesterday when I was trying to open the Organization Parameter form for that specific organization, the form came up as blank and in the bottom the error is Query caused no records.
    I have checked data is there in the base table mtl_parameters.
    Value is coming for other organizations. Only one specific organization is having this issue.
    Even in Examine, I have taken the last query run on that form and ran the same in back end database, I can see all values are there in the database.
    But in frontend screen the values are not showing. even organization code also not showing.
    Navigation is: Inv Super user --> Setup --> Organization --> Parameter

    Have you checked Organization Access to ensure that no one restricted that org?
    Or shipping grants and roles?
    I think there are quite a few places that you can restrict access.

  • Report Painter values are not populating for a particular cost center

    Report Painter(GR55) values are not populating for a particular cost center for the months of April 1 2011 where as for May onwards values are displaying correctly..We have check the transaction code KSB1 for this cost center there are some values posted for the period of April..
    Can any one help me to find out where exactly the issue is and how to resolve the same..

    Please check your variables in your report.

  • Revenue values are not flowing into COPA

    Dear Experts,
             We are processing the MTS normal scenario. Here the revenue values are not flowing into COPA when FG sale. But when we process the Raw material Sale values are flowing to COPA smoothly. Here the SD condition Type, Revenue Account and COPA value Field same for RM and FG.
    May I know the exact reasonu2026.
    Please suggest me in right wayu2026.
    Regards,
    Balaji Bhonsle.

    Hi Balaji bhau
    I guess the issue might be with your Item Category in SD.. Is it set relevant for billing??
    See if the Billing Type has been entered in KE4W and the VF reset for it
    Check in VFX3 if the invoice is lying there for any error.... Try to release the Billing to accounting and you may get the error message
    br, Ajay M

  • EA Version 4.0 - Partition high-values are not displayed (NULL)

    The partition high values are not schon in the "partitions" tab of the table. Only NULL was displayed.

    Sorry i slept, this is referenced partitioned table. Only in the parent rtable there will be the high-values displayed.

Maybe you are looking for

  • Game center muti account

    I have an apple id (obviously) and can set up game center on my iphone4. Both my kids have ipod touches and can't have apple id's as they are minors. Hence the three of us seem to have to share the same identity on game center. Is there a way around

  • Full System Recovery with Time Machine - Applications missing

    Hi, My Macbook recently met a nasty end by a glass of wine and ended up completely dead.  Not to fear, I thought, it's all backed up on my Time Machine.  So I got hold of a Mac Mini and started to attempt to restore my system using Time Machine.  Whe

  • Can I run a 2560x1440 monitor with HP Pro 3381 MT

    I have a Desktop 27 inch which has model "HP Pro 3381 MT" and monitor`s resolution is 1366*768 . My OS is IOS hackingtosh. I want to run with my PC  as IMAC with 2560*1440 resolution. Can I solve this problem?

  • Issue Processing Account Dimension When Number of Levels Decreases

    Hello. We have an issue processing the account dimension. It started at 8 levels, then decreased to 6 levels. However, the processing errors out. If we add some dummy members to bring it back to 8 levels, then it process fine. Any ideas? Thanks, Nanc

  • User |TMSADM has no RFC authorization for function group SYST

    Hi All, When we release any transports we are getting the above error, this is basically due to the fact that implificaiton of complex password parameters, to supress this we had followed the note 761637. I had regenerated RFCs and reset TMS user, bu