SYSFAIL error SMQ2 during initial load of PLANTs

Hello Everyone,
We are on CRM50 and during the process of the initial download of plants not all plants were replicated. Now we are attempting another load using DNL_PLANT and getting the following error:
Business partner ##1 does not exist. I have not seen this error before and I am not sure how to proceed.
Thanks in advance for your help.
Cheers
Wiktor

Hello Tiest,
That did not seem to be the issue. I went through and validated the load objects and there was some new configuration in the sales area which I moved over. All other objects loaded correctly.
When I executed DNL_PLANT got:
Not all address numbers have yet been issued.
More confused then before. Any other thoughts?
Thanks for the help!
Cheers
Wiktor

Similar Messages

Sysfail error during initial load

Got sysfail error. Checked for shortdumps and found this
MESSAGE_TYPE_X     SAPLCRMO
'No external system (such as CRM) connected'
Checked the RFC. Seems ok. Any idea?
Get the parameters for the RFC conection.
    c_stshd-mass_queue = c_stshd-mass_data.
    PERFORM get_download_params_and_queue
            TABLES t_bapistructures
            USING c_stshd-objname
                  c_stshd-objclass
                  gv_destination
                  gv_rfc_queue
                  gv_server_release
                  i_bapicrmdh2
                  c_stshd-mass_queue
                  c_stshd
                  i_transfer_data
                  i_crmrfcpar
                  e_rfcoltp.
Set variables
    e_synchronous_call = gv_synchronous_call.
Raise an error if the destination of the foreign system could not be
found. (Only during Initial Load, Upload, Compare and Requests).
    IF gt_rfcdest[] IS INITIAL AND
       NOT i_bapicrmdh2-ref_id IS INITIAL.
      MESSAGE x050(c_) WITH
              'No external system (such as CRM) connected'(007).
    ELSE.
      t_rfcdest[] = gt_rfcdest[].
    ENDIF.

The RFC Destination for Replication & Realignment (Clt 000) isn't set because only the root admin has access to clnt000 and he's in vacation. Could that be the problem?

CRM 5.0 - Error during Initial Load

Hi,
We have connected CRM 5.0 with ECC 5.0.
During initial load we are getting error in the outbound queue of ECC system as 'Name or Password incorrect (Repeat Logon)'.
Any idea, why is this happening. We have double checked the user id and password entered in SM59 is correct.
Thanks in advance,
Amit

Hi Michael,
Yes, I had checked on both the systems.
Anyways, the problem is now solved, it seems the BASIS team did some goofup while configuring the RFC destinations. It is working now.
Thanks for your help.
Cheers,
Amit

Acrobat PDFMaker Office COM Addin for Microsoft Office 365 does not work. When I check the cox for COM Add-ins, it unchecks it. "A runtime error occurred during the loading of the COM Add-in." I use Adobe X Professional. The Add-in worked fine in Office 2

I recently upgraded to Microsoft 365 Home and use Outlook 2013. The Acrobat PDFMaker Addin worked fine in Office 2010. Now, I get an error message: Not loaded. A runtime error occurred during the loading of the COM Add-in.
I use Adobe Acrobat X Professional.
I have restarted Outlook, restarted my computer, and nothing changes.
Does anyone have a solution?
Steve

I do not think that AA X is compatible with the newest versions of OFFICE and such. Your only choice is to print to the Adobe PDF printer or use the MS plugins to create PDFs.

Not Loaded. A runtime error occurred during the load of the COM add-in.

Hey All!
I am relatively new to Hyperion, and need some help. I recently purchased a new laptop, and I am trying to reinstall Smart View 11.1.2.1 on my home system, but I continue to run into difficulties. I launch the Smart View installer by right-clicking and selecting "Run as Administrator," and everything seems to install successfully. However, when I open Excel or any Microsoft Office product, the Smart View tab is unavailable, and when I Manage my COM add-ins, the pop-up box reads "Load Behavior: A runtime error occurred during the loading of the COM add-in."
I have looked into my registries, and everything seems to be in order. I have changed my load behavior back to 3 as well. Any ideas? Are there any compatibility issues I need to consider? Thanks for your help!
Craig

PLEASE do not do this! You are storing up trouble for the future that will be so much harder to unpick.
1. It does not solve the problem. Whatever the problem was, this is not the solution! If the issue is multiple DLLs, you need to delete the duplicates and register the correct ones, not make even more copies. If the problem is permissions, you need to sort that one out.
2. If it appears to solve the problem, then the problem (something to do with permissions) needs to be solved at source, not kludged round like this.
3. If there is an unresolved problem on the system, it is more likely that the next upgrade will not go well.
4. Uninstaller cannot remove the copies you made manually. The same thing applies to upgrades! You risk getting mixed versions afterwards.
My first steps to resolve this problem would be:
1. Uninstall the SmartView client. You must be an administrator to do this -- try to be the same administrator that installed it.
2. Clean up. Make sure the files are all deleted. Search the whole box for old files (HsTBar.xla, HsAddin.dll etc.) possibly left over from an old installation -- you might have upgraded into a different location at some time in the past and left orphaned files hanging around. Get rid.
3. Reboot. Log in as a local administrator.
4. Open Excel and visit the Add-Ins dialog and remove any entries for SmartView.
5. Install SmartView client from a local copy of SmartView.exe -- make sure you have the correct version.
That solves 99% of problems like this. If you have to register the DLLs manually, it suggests that your 'administrator' account doesn't have the full rights you think it has. DON'T kludge it by copying DLLs into your profile!
Thanks.

Error during Initial Load

All:
I have Idm set up. I am trying to run the initial load (Use Case : SAP NW Portal). The datasource is a LDAP active directory server (Microsoft AD). I get the following error while running job.
XML and HTML version of the log do not show. Here is the "Text" version: ____________________________________________________________________________________
<mx:INFO>Temporary customer license. Contact SAP to get a perpetual license</mx:INFO>
<mx:INFO>CLASSPATH directory (E:\XIM\Identity Center\.) contains no class files.</mx:INFO>
<mx:INFO>License will expire on 30. June 2008</mx:INFO>
</mx:GENERAL>
<mx:PASSES>
<mx:PASS name="Job Initialization" title="Messages that occurred before the job was loaded" type="init" seq="0">
<mx:MESSAGES>
<WARNING seq="1">
<mx:TEXT>_Failed loading JDBC Driver class com.microsoft.jdbc.sqlserver.SQLServerDriver_</mx:TEXT>
<mx:TEXT>java.lang.ClassNotFoundException: com.microsoft.jdbc.sqlserver.SQLServerDriver</mx:TEXT>
</WARNING>
</mx:MESSAGES>
</mx:PASS>
<mx:PASS name="581C81F5-A703-4718-B063-E6A87DCD741A" title="ReadUsersFromLdap" type="Fromsource DSA" seq="1">
<mx:MESSAGES>
<mx:ERROR seq="1">
<mx:TEXT>fromDSA.doSearch got exception, returning false</mx:TEXT>
<mx:TEXT>javax.naming.AuthenticationException: [LDAP: error code 49 - 80090308: LdapErr: DSID-0C090334, comment: AcceptSecurityContext error, data 525, vece
I have set the CLASSPATH environmental variable. C:\Program Files\Microsoft SQL Server 2005 JDBC Driver\sqljdbc_1.1\enu\sqljdbc.jar and made the entry in the Console -> Options -> Java Tab.
Why does it still keeping looking for it in the Installation Directory (E:\XIM\Identity Center\.)
Help Please.
Thanks
S.

All:
The error here was not because of the JDBC driver but an authentication error. Got past this by assigning "Domain Admin" role to the AD user used to connect to the Directory Server.
Thanks
S.

Error during initial load of object SI_CONNOBJ

Hi All,
I am not able to do initial load of object SI_CONNOBJ from OLTP R/3 to CRM using transaction R3AS. It is in "Abort" Status. When I am checking the relevant Bdoc generated for the same it is giving me the error as "No data records in transport structure BAPIMTCS Message no. IBSSI_CRMTO_MESSAGES010 ". Please help me in this regard.

Hello Aishuman,
I am not sure what your question is. Yes, of course, you must have connection objects in the IS-U system. Otherwise, what do you want do download to CRM? You must have have the middleware in general and also the adapter SI_CONNOBJ enabled in the IS-U system. I am sure you know, that an IS-U connection object is represented as an IBASE in CRM.
Does a delta replication work (from IS-U to CRM and from CRM to IS-U)?
Kind regards,
Fritz

Error in DNL_CUST_PROD1 Initial Load

While attempting to carry out the initial load for object (DNL_CUST_PROD1) from R/3 to CRM an inbound queue is generated with status SYSFAIL containing the following error message:
It is not posible to import material type to hierarchy ZBP_CRM_PT....
(Message no. SR053)
The Hierarchy mentioned in the message refers to one that was created manually in CRM before the initial load.
It was under my understanding that the only hierarchy impacted by the initial load was the R3MATCLASS, then why is this error generated for another hierarchy that should not be involved?
Regarding this issue I feel I have two options:
1. Delete the hierarchy in CRM and restart the initial load. (The only problem here is that I have found it really dificult to carry out the deletion, because it means I have to delete products and IObjects created in CRM that are associated to this hierarchy)
2. Try to find a way to prevent error to appear in the inbound queue. (for example in debugging try to bypass the logic that processes the manually created hierarchy)
Please I would greatly appreciate to get an answer from anyone that has encounterd similar problems.
Thanks in advance,
Pedro

Dear Efrain Pacheco
Just have a look into the corresponding entry in ST22 .
The problem persists due to the duplicate entries in the table T023 or .
Delete them directly from the table using se16:
Select the entries in the classic view (not ALV or grid view). activate the debugger.
Press the view button. --> you'll enter in the debugger
Press F7
Locate the sy-ucomm variable & change it to "DELE".
Press F8
Delete the entries.
Trick-shots but it works!
Let me know in case of any persistent problems .
<b> Note: Reward points if it helps</b>
Thanks & Regards
Jaman

How to use more than one application server during initial load?

Hi,
we plan to use more than one application server in CRM during initial download in order to increase the number of parallel requests and to decrease the time for the initial load. Is there a way to allocate requests to more than one server? Is is possible via multiple rfc connections for consumer CRM in CRMRFCPAR?
Thanks.
Alexander Schiffer

Hi Naresh,
thanks for your answer. It has solved my problem. SMLG is the transaction that I was looking for.
Two more OSS notes that helped me to guide our basis into the right direction:
OSS 593058 - New RFC load balancing procedure
OSS 1413986 - SMLG: Possibility to select a favorite type for Ext.RFCs
Thanks again.
Alexander Schiffer

Error AS ABAP initial load

At my initial load AS ABAP, the following error showed up:
putNextEntry failed storingS_A.SHOW
Exception from Add operation:com.sap.idm.ic.ToPassException: ToIDStore.addEntry failed storing entry 'S_A.SHOW'. IDStore returned error message: " No such attribute:Attribute: ACCOUNTM23_ME5" when storing attribute 'ACCOUNTM23_ME5=S_A.SHOW'
Exception from Modify operation:com.sap.idm.ic.ToPassException: ToIDStore.modEntry failed updating entry 'S_A.SHOW'. IDStore returned error message: "Entry does not exist" when fetching entry
This error message affects all users. Where can I add the missing attributes?
Thanks for your help!!!

Gerhard,
Could you please share the solution?
Thanks.

Privileges getting removed during initial load

Hi All,
I was performing initial load,There is no error as such in initial load however privileges are removed from backend but available on IDM , any changes perform to identity all roles are provisioning to back end system.
When i have googled it , I have found few good links(http://scn.sap.com/thread/3400455) which says issue is fixed in IDM 7.2 SP8 ,however i am using SP8 but still facing same issue.
I have attached current version of Provisioning framework which is been used .... Please let me know it is right version.
Secondly, I have also attached script & version of IDM , Please advice on it.
Regards,
Ali

Hi Ali,
I have seen and experienced this before. If you are doing an initial load when the users are already in the system, you may well experience this since the load job is overwriting what your users have.
Take a look at this blog post I wrote: Setting Write Permissions on ABAP Initial Loads.
I think it might help point you in the right direction.
Thanks,
Matt

Perform rollback occurs during initial load of material

Hi Gurus,
When we try to do the initial load of materials, only some part of the materials are replicated to SRM. We have the R3AC1 filter of taking only the materials with Purchasing view. We have no other filter. Although there are 576 materials that match this filter, only 368 materials are replicated to SRM.
One thing we have observed is that when we have a look at SM21 (System Log) we see "Perform rollback" actions. Below is the details of the log. Can anyone help on our issue?
Details Page 2 Line 30 System Log: Local Analysis of sapsrmt 1
Time
Tip
Nr
Clt
User
İKodu
Grp
N
Text
23:52:59
DIA
003
013
ALEREMOTE
R6
8
Perform rollback
Perform rollback
Details
Recording at local and central time........................ 29.11.2006 23:52:59
Task......
Process
User......
Terminal
Session
İKodu
Program
Cl
Problem cl
Package
87262
Dialog work process No. 003
ALEREMOTE
1
SAPMSSY1
W
Warning
STSK
Further details for this message type
Module nam
Line
Error text
Caller....
Reason/cal
thxxhead
1300
ThIRoll
roll ba
No documentation for syslog message R6 8 exists
Technical details
File
Offset
RecFm
System log type
Grp
N
variable message data
4
456660
m
Error (Function,Module,Row)
R6
8
ThIRollroll bathxxhead1300

Hi,
Some of our material groups were problematic. After removing these the problem is resolved.
FYI

Sales document types during initial load

Hi Gurus,
Landscape - SAP R/3 4.6 c, CRM - 4.0
We are starting the initial load for the Sales documents, item categories etc.
For the same, for the document types in R/3, we have the same document type in CRM.
Question 1- Do I need to configure the partner determination, incompletion log etc for the document type before the initial load or I can do it later once the data is in CRM.
Question 2- Is it mandatory that for all the doc types in R/3, we have the respective document type in CRM? Logically yes, if yes, where can I find the mapping? For example for OR in R/3, there is a TA in CRM.
Request someone to answer this ASAP.
thanks
Yash

Hi Yash,
I think the behavior is just use the same code
of Transaction Type in CRM and Order Type in R/3.
Since partner determiniation using different partner
function codes in CRM and R/3, maintained or not in R/3,
you may still need to maintain it again in CRM.
For document, what you can do just create same document
type (Transaction type) for R/3 and CRM. And depends upon
you sceneario (in CRM there are several scenarios such as
document created in CRM and transfered to R/3 Or download
R/3 document into CRM - no transaction in CRM).
Especially for partner, you may need to setup data
transfer CRM to R/3 or R/3 to CRM in CRM configuration.
And in R/3 you need to define it in tcode PIDE.
Hope this helps.
Cheers,
Gun.

SMQ2 failure during Initial load - Unable to interpret 9.990. as number

hi All,
I perform the initial download of customizing objects from R/3(4.6C) to CRM 7.0.
For object DNL_CUST_BASIS2 I received the "Unable to interpret 9.990. as a number" error message.
Could you give some hints how to solve this problem?
I checked several posts with similar error messages, but none of them seemed to be related to my case.
We just implemented note 777944 to update SMOFPARSFA in CRM to neglect the unicode check.
I was able to download other customizing objects like DNL_CUST_BASIS, DNL_CUST_ACGRPB, DNL_CUST_ACGRPP, DNL_CUST_ADDR.
My next step is to debug the queue, if you have further suggestions let me know.
Thanks

Hi,
Please check my reply in the link
Loading DNL_CUST_BASIS2: Unable to interpret "9.990. " as a number.
Hope this will help.
Thanks,
Vikash.

JCo3Proxy.logonSapi(String) Error during Initial Load of BW HANA Repository

I am attempting to create a connection to a BH HANA system and get the following error:
Error occurred in JCo3Proxy.logonSapi(String):
com.sap.conn.jco.JCoException: (102) JCO_ERROR_COMMUNICATION: Initialization of destination BWHANA failed
The repository was created just like all other ABAP repositories. I can use the GUI to log in without issue. This is an odd one.
Its important to know this is repository DOES NOT point to the actual HANA DB, but to the BW ABAP connected system.
Your thoughts?

Hello Andrew,
looks like an error with the login trough the IDM.
It would be essential to mention which version of IDM you are using and pobably a screenshot of the repository configuration. Also have in mind that it is better not to use dialog user for the IDM - BW integration.
What repository type you are using?
If you want direct HANA DB connection you should use the repo type SAP HANA - the configurations there are slightly different than the standard ABAP repository ones.
Please check the following in the ABAP Repo constansts:
a) JCO_CLIENT_ASHOST - try with full hostname, sometimes it is not resolved correctly
b) JCO_CLIENT_SYSNR - make sure you get the right value here, same systems using different DBs have different client system nymbers
c) JCO_CLIENT_CLIENT - the client used for the connection
d) JCO_CLIENT_USER - the user used for the connection, as i said it might not be a dialog user.
Regards
Todor

SYSFAIL error SMQ2 during initial load of PLANTs

Similar Messages

Maybe you are looking for