Syslog Reports not collect Syslog.log file Messages

I am doing a installation on CiscoWorks 3.2. after two three weeks I found my syslog services is not working properly. Once I checked on the syslog.log its updated with the device logs as normal. But when I am going to generate report it’s not collect data from the syslog log file. I have notice my syslog analyzer and syslog collator processes are shown as = Program started - No mgt msgs received. Is this normal on the LMS serve?
Anyway I found following error massagers on the SyslogAnalyzer.log file.
cisco.nm.xms.ctm.common.CTMException: CTMRegistryClient::addNewURNEntry URN : SyslogAnalyzerService ErrMsg : URN already in use
                at com.cisco.nm.xms.ctm.server.CTMServer.publish(CTMServer.java:253)
                at com.cisco.nm.xms.ctm.server.CTMServer.publish(CTMServer.java:180)
                at com.cisco.nm.rmeng.sa.SyslogAnalyzerEngine.registerWithCtm(SyslogAnalyzerEngine.java:2267)
                at com.cisco.nm.rmeng.sa.SyslogAnalyzerEngine.start(SyslogAnalyzerEngine.java:2189)
                at com.cisco.nm.rmeng.sa.SyslogAnalyzerService.main(SyslogAnalyzerService.java:109)
please I need your expertise knowledge to sort out this problem.
Thank you,
Chandimal.k
+94777420771

Hi,
Errors Found:
SyslogCollector - [Thread: main] WARN , 15 Dec 2011 14:33:46,505, Unable to resurrect connection to a subscriber.
URN : SyslogAnalyzerService ErrMsg : URN already in use
Try deleting the ctmregistry and ctmregistry.backup files and regenerat your SSL certificate and then resubscribed to the syslog collector.
1. net stop crmdmgtd
2. delete all the server.* files in ../CSCOpx/MDC/Apache/conf/SSL
3. Open a dos shell and cd to:
../CSCOpx/MDC/Apache, and run: perl ConfigSSL.pl -disable and then again perl ConfigSSL.pl -enable
You will see now a lot of questions, please make sure that you enter correctly the question of FQDN!
4. if you don't want to use SSL, run again: perl ConfigSSL.pl -disable
If you use SSL please don't do anything.
5. net start crmdmgtd
Then wait fifteen minutes for all the LMS services to come up before testing.
Thanks

Similar Messages

  • Is there a way to automatically collect the log files from a AirPort or TimeCapsule base station?

    Hi there,
    the headline says basically all: Is there a way to collect the log files from a Time Capsule 7 AirPort from time to time? They are overwritten quite soon but I want a complete log of all activities to my access point.
    The AirPort Utility says something about SNMP. Is this the way to go? Some kind of demon on my Mac that retrieves and saves the logs like every two days?
    I want to copy the access logs, I am not interested in Time Machine backup logs.
    Thanks.

    There is a way to do this via Syslog. On the Logging & Statistics panel (within the AirPort Utility), you can point the AirPort's system logs to a Syslog "server."
    This would require a "dedicated" network client to receive the logs.
    Unfortunately, setting up a Syslog server is a bit intensive initially, but is simple to operate and maintain.
    Please check out this Apple Support Communities thread: Directing Syslog message to a file
    ref: Enable an Apple Mac OS machine as a syslog server

  • Ora-07445 reported in the alert log file

    Hi all,
    We are using the following platform:-
    OS: Solaris Operating System (SPARC 32-bit)
    Oracle Server - Enterprise Edition / Product Version: 9.2.0.5.0
    We encountered the following problem:-
    There is Ora-07445 reported in the alert log file.
    "ORA-07445: exception encountered: core dump [kgghash()+308] [SIGSEGV] [Address not mapped to object] [0x3222
    000] [] []reported in the database."
    These errors are signaled in more than 3 independent, unexplained, occurrences every day.
    When this error occurred while User was accessing the application system, by right the case will be shown on the system, but they were no case found.
    alert log are as below:-
    Fri Jul 27 09:12:30 2007
    Errors in file /disc3/oracle9205/RFDB/udump/rfdb_ora_27371.trc:
    ORA-07445: exception encountered: core dump [kgghash()+340] [SIGSEGV] [Address not mapped to object] [0x3184000] [] []
    Fri Jul 27 09:22:10 2007
    Thread 1 advanced to log sequence 10730
    Current log# 2 seq# 10730 mem# 0: /disc3/oracle9205/RFDB/RDO/logRFDB2a.rdo
    Current log# 2 seq# 10730 mem# 1: /disc3/oracle9205/RFDB/RDO/logRFDB2b.rdo
    Fri Jul 27 09:29:26 2007
    Errors in file /disc3/oracle9205/RFDB/udump/rfdb_ora_27372.trc:
    ORA-07445: exception encountered: core dump [kgghash()+296] [SIGSEGV] [Address not mapped to object] [0x3182000] [] []
    The applications have encountered ora-3113 after a short period of time followed by ora-3114.
    application log:-
    RF0120-1 2007-Jul-27 09:46:57] Load m[RF0120-1 2007-Jul-27 09:29:30] SQLCODE: -3113
    [RF0120-1 2007-Jul-27 09:29:30] Error Code -4105 returning from get score pan no.
    [RF0120-1 2007-Jul-27 09:29:30] Message type :120
    [RF0120-1 2007-Jul-27 09:29:30] Primary Account Number(PAN) DE0
    02 :5440640155262702
    [RF0120-1 2007-Jul-27 09:29:30] Processing code DE003 :003000
    [RF0120-1 2007-Jul-27 09:29:30] Transaction amount DE004 :000000000001
    [RF0120-1 2007-Jul-27 09:29:30] Settlement amount DE005 :000000000000
    [RF0120-1 2007-Jul-27 09:29:30] Transmission Date and time
    DE007 :0727092717
    [RF0120-1 2007-Jul-27 09:29:30] Settlement conversion rate DE009 :60263158
    [RF0120-1 2007-Jul-27 09:29:30] System trace audit no. DE011 :754710
    [RF0120-1 2007-Jul-27 09:29:30] Local transaction time DE012 :092717
    [RF0120-1 2007-Jul-27 09:29:30] Local transaction date DE013 :0727
    [RF0120-1 2007-Jul-27 09:29:30] Expiration date D
    E014 :0712
    [RF0120-1 2007-Jul-27 09:29:30] Settlement date DE015 :0727
    [RF0120-1 2007-Jul-27 09:29:30] Merchant type DE018 :5311
    [RF0120-1 2007-Jul-27 09:29:30] Point-of-service(POS) entry code DE022 :051
    [RF0120-1 2007-Jul-27 09:29:30] Acquiring inst. ID code DE032 :001912
    [RF0120-1 2007-Jul-27 09:29:30] Forwarding Inst. ID code DE033 :001912
    [RF0120-1 2007-Jul-27 09:29:30] Retrieval ref. no.
    DE037 :754710356390
    [RF0120-1 2007-Jul-27 09:29:30] Autholization ID response DE038 :356390
    [RF0120-1 2007-Jul-27 09:29:30] Response code DE039 :00
    [RF0120-1 2007-Jul-27 09:29:30] Card acceptor terminal ID DE041 :19306002
    [RF0120-1 2007-Jul-27 09:29:30] Card acceptor ID code DE042 :000001106
    020132
    [RF0120-1 2007-Jul-27 09:29:30] Card acceptor Name/Location
    What could have caused the above mentioned errors i.e Ora-07445 ; ora-3113 / ora-3114? How to resolve the problem.
    Please help .
    Thanks.

    i am also facing the same some time in ora 9.2.0.6 on Sun OS 9 SPARC 64-bits
    Errors in file /oracle/oracle9i/admin/FINPROD/udump/finprod_ora_6076.trc:
    ORA-07445: exception encountered: core dump [0000000100FDE088] [SIGSEGV] [Address not mapped to object] [0x00000013A] [] []
    Thu Aug 30 08:52:39 2007
    Errors in file /oracle/oracle9i/admin/FINPROD/udump/finprod_ora_6078.trc:
    ORA-07445: exception encountered: core dump [0000000100FDE088] [SIGSEGV] [Address not mapped to object] [0x00000013A] [] []
    Thu Aug 30 09:41:49 2007

  • Rman can not able generate log file in linux shell script

    Friends,
    In shell script we use  below command to save processing information.
    $ORACLE_HOME/bin/rman "target=/" > ${LOG} <<- EOF
    Recent days, it does not work and return message as
    ./test.sh: line 78: LOG: command not found
    ./test.sh: line 83: /u01/test/oracle/scripts/crons/logs/testdb_013120141148.log: No such file or directory
    find: /u01/test/oracle/scripts/crons/logs: No such file or directory
    It seems that rman can not create a log file when we passed log variable value.
    Thanks for help

    Hi,
    Seems some one removed the log directory.. check the log directory as specified in the script. and create that one if not exist.

  • Could not open error log file ''. Operating system error = 5(failed to retrieve text for this error. Reason: 15105).

    Hello
    When I try to start the SQl server service i get the following error:
    Event id 17058
    Could not open error log file ''. Operating system error = 5(failed to retrieve text for this error. Reason: 15105).
    As a test I have made sure the errorlog file ,and the entire drive it is, has everyone full control permissions, but to no avail. Does anyone have any ideas to resolve this issue?
    Thank you

    Hi,
    Try running:
    SELECT SERVERPROPERTY('ErrorLogFileName')
    Then verify that the account being used to run the SQL Server service account has access to the path output above.  If possible, you could try logging onto the server with the same account used to run SQL Server then navigate to the errorlog folder.
    Thanks,
    Andrew Bainbridge
    SQL Server DBA
    Please click "Propose As Answer" if a post solves your problem, or "Vote As Helpful" if a post has been useful to you

  • SQL Server not Starting Up - Could not open error log file system error = 5(Access is denied.)

    Hi guys,
     I am working on issue with SQL Server 2008 R2 .. we rebooted the server and after that all SQL services is not coming up. below is the error from eventlog...
    SQL Server running under NetworkService account and has full control on this files..
    from Config Manager ....
    The request failed or the service did not respond in a timely fashion....
    From Event log..
    initerrlog: Could not open error log file 'C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Log\ERRORLOG'. Operating system error = 5(Access is denied.).
    Any idea or workaround..?
    Thanks..
    Please Mark As Answer if it is helpful. \\Aim To Inspire Rather to Teach

    Finally I found solution and was able to bring back online the SQL Services...
    I had a very similar issue with the following error (event log):
    Description:
    The SQL Server (MSSQLSERVER) service terminated with service-specific error 17058 (0x42A2).
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    Event Type:      Error
    Event Source:      MSSQLSERVER
    Event Category:      (2)
    Event ID:      17058
    Date:            19/05/2012
    Time:            10:20:14
    User:            N/A
    Computer:      NSQLXX
    Description:
    initerrlog: Could not open error log file 'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG'.
    Operating system error = 5(error not found).
    In this case the ERRORLOG file had been marked as read only. This was following a scheduled automated boot.  -This
    was culprit
    MSSQL wouldn't not start until this file had been changed.
    http://www.experts-exchange.com/Database/MS-SQL-Server/Q_23951723.html
    Thanks everyone for your kind replies and time...
    Please Mark As Answer if it is helpful. \\Aim To Inspire Rather to Teach

  • SCCM 2012 - Reporting Services - No srsrpsetup.log file

    Hi all,
    just in the process of moving from SCCM 2007 to 2012 R2. Here's the set up: SCCM installed on Win 2012 R2 box, SQL back end is off box on a Win 2012 R2 cluster, SQL Reporting Services is installed on a dedicated Win 2012 R2 box.
    I've installed the Reporting Services Point onto the SRS01 box (which also installed the Site system and Component server roles). The role seems to have instlled ok - it's popped up under the Component Status as Healthy and the State Messages look ok:
    I was under the impression that I should then see a new log file (SRSRPSetup.log) appear in the install directory (D:\Program Files\Microsoft Configuration Manager\Logs) but so far nothing's appeared. Since the log files are usually the best to start
    troubleshooting I'm a bit stumped as to where to begin troubleshooting this. Does anyone have any suggestions as to why the log file may not have appeared?
    Thanks for the help!

    Ignore this, just had a poke around on the SRS server and found the log files under D:\SMS\logs. Should have realised sine the role was installed on the SRS01 server, that's naturally where the role installation logs would be located!

  • Parameter issue - report not generating any pdf files

    Hi All,
    I'm trying to run a report which generates pdf files. Is there any limitation on the parameter string size? For one of the parameter values - '11F EA Accept nonhonor ASnSOMnSON_20091201090150846' the report is not generating any pdf files. I assumed the reason is of the keyword 'AS' in it and created another parameter value - '11F EA Accept nonhonor AnS-SOM-SON_20091202074331997', but it is also not generating any pdf files. I get this message from Adobe Reader " There was an error opening this document. This file cannot be opened because it has no pages. " The report is working normally when i hardcode the same parameter values into the logic. Any suggestions on this?
    Thanks.
    Edited by: user1049091 on Dec 2, 2009 9:17 AM
    Edited by: user1049091 on Dec 2, 2009 12:37 PM

    Tim,
    That report is working normally for all the parameter values, except this one. It is not working only if i pass the value - ''11F EA Accept nonhonor ASnSOMnSON_20091201090150846' as a parameter. It is generating the pdf files when i hardcode the same value into sql query logic in the data template, instead of passing it as a parameter. Please advise.
    Thanks.

  • Listener.log file message

    Hi Gurus
    I am using oracle 10g 10.2.0.1 database.
    In my listener log file frequently getting message '* service_update * ' .
    Is it indicating any error ?
    Please update me.
    Regards
    Rabi

    Hi;
    PMON is responsible for updating the listener with information about a particular instance such as load and dispatcher information. Maximum load for dedicated connections is determined by the PROCESSES parameter. The frequency at which PMON provides SERVICE_UPDATE information varies according to the workload of the instance.
    The maximum interval between these service updates is 10 minutes.
    The listener counts the number of connections it has established to the instance but does not immediately get information about connections that have terminated.
    Only when PMON updates the listener via SERVICE_UPDATE is the listener informed of current load. Since this can take as long as 10 minutes, there can be a difference between the current instance load according to the listener and the actual instance load.
    Source:
    DBconsole Initialization Fails Due To Error ORA-12516 [ID 458308.1]
    PS:Please dont forget to change thread status to answered if it possible when u belive your thread has been answered, it pretend to lose time of other forums user while they are searching open question which is not answered,thanks for understanding
    Regard
    Helios

  • Crystal Report not works in JAR File

    I'm using Eclipse All in one, which includes Crystal Reports.. I Connected my Java program with Crystal Reports and its working properly. Now my problem is that the Report is not working in JAR files.. It throws some exception as
    "com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: com.businessobjects
    com.businessobjects.reports.sdk.JRCCommunicationAdapter---- Error code:-2147215357 Error code name:internal"
    Whats the Error.. I don't know. I think that i may missed some CLASSPATH Files. The included CLASSPATH Files are:
    ReportViewer.jar
    jrcerom.jar
    Concurrent.jar
    CrystalCharting.jar
    CrystalCommon.jar
    CrystalContentModels.jar
    CrystalExporters.jar
    CrystalExportingBase.jar
    CrystalFormulas.jar
    CrystalQueryEngine.jar
    CrystalReportEngine.jar
    CrystalReportingCommon.jar
    icu4j.jar
    keycodeDecoder.jar
    log4j.jar
    MetafileRenderer.jar
    rasapp.jar
    rascore.jar
    rpoifs.jar
    Serialization.jar
    URIUtil.jar
    xercesImpl.jar
    xml-apis.jar
    and the mysql-connector jar file
    Anybody help me please...

    Unable to load database connector
    'com.crystaldecisions.reports.queryengine..driverImpl.
    DriverLoader
    now you have any idea.. pleaseIs that a typo where you have two periods below?
    queryengine..driverImplOther than that I don't think anybody here can help you with that. If your classpath includes all necessary JAR files and you are able to access all your resources from within your application JAR file, then I imagine there is a problem with the third-party crystal decisions JAR file or how you are attempting to use it.
    My advice to you is to try and contact support with the vendor or provider of this API or possibly try posting on a support forum on their website to see if somebody can help you there.

  • Crystal Report not working in JAR File

    I am using Eclipse All in one, which includes the Crystal Report... I Finished every thing and the Crystal Report is working in Eclipse.. But its not working in JAR files.. Anybody suggest me WHICH FILES SHOULD BE SET AS CLASSPATHS FOR CREATING THIS JAR FILE...
    Thanks in advance

    Unable to load database connector
    'com.crystaldecisions.reports.queryengine..driverImpl.
    DriverLoader
    now you have any idea.. pleaseIs that a typo where you have two periods below?
    queryengine..driverImplOther than that I don't think anybody here can help you with that. If your classpath includes all necessary JAR files and you are able to access all your resources from within your application JAR file, then I imagine there is a problem with the third-party crystal decisions JAR file or how you are attempting to use it.
    My advice to you is to try and contact support with the vendor or provider of this API or possibly try posting on a support forum on their website to see if somebody can help you there.

  • "this is not a valid PDF file" message when creating a new document?

    Every time i try and open a new document I get a message that says this is not a valid PDF file?
    Has anyone else recieved this message?

    Sorry, I am out of ideas. Unless anyone else can help I suggest you need to contact support directly. It’s usually possible to start a live chat, if an Adobe agent is free, and often to get problems fixed right away.
    To get help now click here for product support

  • Database not starting,REDO log file error?

    My DB was working fine uptill last evening, when i restarted it for some DB task it showed me an error ..
    ORA-00333: redo log read error block 57346 count 8192
    I studied the alert log file & related trace file .... but could not conclude what to do ?? Can any one suggest me what could be the solution...
    ORACLE 10g R2
    Windows 2003 Server
    Database in NOARCHIVELOG mode.
    I don't have the recent backup.The one i have is 20 days old.
    Alert Log file contents : -
    Wed Jun 02 20:22:19 2010
    Aborting crash recovery due to error 333
    Wed Jun 02 20:22:19 2010
    Errors in file e:\oracle\product\10.2.0\admin\ora10g\udump\ora10g_ora_140.trc:
    ORA-00333: redo log read error block 57346 count 8192
    ORA-333 signalled during: ALTER DATABASE OPEN...
    Wed Jun 02 20:37:15 2010
    db_recovery_file_dest_size of 2048 MB is 0.00% used. This is a
    user-specified limit on the amount of space that will be used by this
    database for recovery-related files, and does not reflect the amount of
    space available in the underlying filesystem or ASM diskgroup.
    Wed Jun 02 20:43:53 2010
    Shutting down instance: further logons disabled
    Wed Jun 02 20:43:53 2010
    Stopping background process CJQ0
    Wed Jun 02 20:43:54 2010
    Stopping background process MMNL
    Wed Jun 02 20:43:55 2010
    Stopping background process MMON
    Wed Jun 02 20:43:56 2010
    Shutting down instance (immediate)
    License high water mark = 3
    Wed Jun 02 20:43:56 2010
    Stopping Job queue slave processes
    Wed Jun 02 20:43:56 2010
    Job queue slave processes stopped
    Waiting for dispatcher 'D000' to shutdown
    All dispatchers and shared servers shutdown
    Wed Jun 02 20:43:58 2010
    ALTER DATABASE CLOSE NORMAL
    ORA-1109 signalled during: ALTER DATABASE CLOSE NORMAL...
    Wed Jun 02 20:43:58 2010
    ALTER DATABASE DISMOUNT
    Completed: ALTER DATABASE DISMOUNT
    ARCH: Archival disabled due to shutdown: 1089
    Shutting down archive processes
    Archiving is disabled
    Archive process shutdown avoided: 0 active
    ARCH: Archival disabled due to shutdown: 1089
    Shutting down archive processes
    Archiving is disabled
    Archive process shutdown avoided: 0 active
    Trace file to read ora10g_ora_140.trc:-
    Dump file e:\oracle\product\10.2.0\admin\ora10g\udump\ora10g_ora_140.trc
    Wed Jun 02 20:22:18 2010
    ORACLE V10.2.0.1.0 - Production vsnsta=0
    vsnsql=14 vsnxtr=3
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
    With the Partitioning, OLAP and Data Mining options
    Windows Server 2003 Version V5.2 Service Pack 1
    CPU                 : 2 - type 586, 1 Physical Cores
    Process Affinity    : 0x00000000
    Memory (Avail/Total): Ph:3527M/4094M, Ph+PgF:4386M/5973M, VA:800M/2047M
    Instance name: ora10g
    Redo thread mounted by this instance: 1
    Oracle process number: 15
    Windows thread id: 140, image: ORACLE.EXE (SHAD)
    *** SERVICE NAME:() 2010-06-02 20:22:18.406
    *** SESSION ID:(159.3) 2010-06-02 20:22:18.406
    Successfully allocated 2 recovery slaves
    Using 545 overflow buffers per recovery slave
    Thread 1 checkpoint: logseq 14261, block 2, scn 86974094
      cache-low rba: logseq 14260, block 4023
        on-disk rba: logseq 14262, block 3758, scn 86978396
      start recovery at logseq 14261, block 2, scn 86974094
    ORA-00333: redo log read error block 57346 count 8192
    ORA-00312: online log 2 thread 1: 'E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORA10G\REDO02.LOG'
    ORA-27070: async read/write failed
    OSD-04016: Error queuing an asynchronous I/O request.
    O/S-Error: (OS 2) The system cannot find the file specified.
    ORA-00333: redo log read error block 57346 count 8192
    ORA-00312: online log 2 thread 1: 'E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORA10G\REDO02.LOG'
    ORA-27091: unable to queue I/O
    ORA-27070: async read/write failed
    OSD-04006: ReadFile() failure, unable to read from file
    O/S-Error: (OS 2) The system cannot find the file specified.
    ORA-00333: redo log read error block 57346 count 8192
    *** 2010-06-02 20:43:58.812
    *** 2010-06-02 20:43:58.812 60680 kcrr.c
    ARCH: Archival disabled due to shutdown: 1089
    *** 2010-06-02 20:43:59.812 60680 kcrr.c
    ARCH: Archival disabled due to shutdown: 1089

    Hi,Aman this(following) may is not good way for opening database,but OP can try and open own database:
    @ DBA4 you will see from following example how you can open your database.In your online log files was corrupted,therefore you have to do following step by step then you database will open.
    SQL> alter database clear unarchived logfile group 2;
    alter database clear unarchived logfile group 2
    ERROR at line 1:
    ORA-01624: log 2 needed for crash recovery of instance p (thread 1)
    ORA-00312: online log 2 thread 1:
    'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\REDO02.LOG'
    SQL> alter database backup controlfile to trace as 'D:\oracle\product\10.2.0\ora
    data\P\c.txt';
    Database altered.
    SQL> shutdown abort;
    ORACLE instance shut down.
    SQL> startup nomount;
    ORACLE instance started.
    Total System Global Area  125829120 bytes
    Fixed Size                  1288100 bytes
    Variable Size              75499612 bytes
    Database Buffers           41943040 bytes
    Redo Buffers                7098368 bytes
    SQL> CREATE CONTROLFILE REUSE DATABASE "P" RESETLOGS   ARCHIVELOG
      2      MAXLOGFILES 16
      3      MAXLOGMEMBERS 3
      4      MAXDATAFILES 100
      5      MAXINSTANCES 8
      6      MAXLOGHISTORY 292
      7  LOGFILE
      8    GROUP 1 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\REDO01.LOG'  SIZE 50M,
      9    GROUP 2 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\REDO02.LOG'  SIZE 50M,
    10    GROUP 3 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\REDO03.LOG'  SIZE 50M
    11  DATAFILE
    12    'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\SYSTEM01.DBF',
    13    'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\UNDOTBS01.DBF',
    14    'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\SYSAUX01.DBF',
    15    'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\USERS01.DBF',
    16    'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\TS_TEST.ORA',
    17    'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\TEST.ORA',
    18    'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\TEST1.ORA'
    19  CHARACTER SET WE8MSWIN1252;
    Control file created.
    SQL> alter database open resetlogs;
    alter database open resetlogs
    ERROR at line 1:
    ORA-01194: file 1 needs more recovery to be consistent
    ORA-01110: data file 1: 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\SYSTEM01.DBF'
    SQL> recover database using backup controlfile until cancel;
    ORA-00279: change 2032832 generated at 06/03/2010 12:42:29 needed for thread 1
    ORA-00289: suggestion :
    D:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\P\ARCHIVELOG\2010_06_03\O1_MF_1_87_
    %U_.ARC
    ORA-00280: change 2032832 for thread 1 is in sequence #87
    Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
    cancel
    ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
    ORA-01194: file 1 needs more recovery to be consistent
    ORA-01110: data file 1: 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\SYSTEM01.DBF'
    ORA-01112: media recovery not started
    then add *_allow_resetlogs_corruption=true* in pfile then startup database with pfile as
    SQL> startup mount pfile=D:\oracle\product\10.2.0\admin\P\pfile\init.ora.pr
    ORACLE instance started.
    Total System Global Area  125829120 bytes
    Fixed Size                  1288100 bytes
    Variable Size              62916700 bytes
    Database Buffers           54525952 bytes
    Redo Buffers                7098368 bytes
    Database mounted.
    SQL> recover;
    ORA-00283: recovery session canceled due to errors
    ORA-01610: recovery using the BACKUP CONTROLFILE option must be done
    SQL> recover database using backup controlfile until cancel;
    ORA-00279: change 2032832 generated at 06/03/2010 12:42:29 needed for thread 1
    ORA-00289: suggestion :
    D:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\P\ARCHIVELOG\2010_06_03\O1_MF_1_87_
    %U_.ARC
    ORA-00280: change 2032832 for thread 1 is in sequence #87
    Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
    cancel
    ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
    ORA-01194: file 1 needs more recovery to be consistent
    ORA-01110: data file 1: 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\SYSTEM01.DBF'
    ORA-01112: media recovery not started
    SQL> alter database open;
    alter database open
    ERROR at line 1:
    ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
    SQL> alter database open resetlogs;
    Database altered.
    SQL>finally remove allowresetlogs_corruption=true parameter from pfile.

  • Debug info from ZAction not visible in log file

    Hi,
    i am trying to see debug info from my Z ActionClass in the log file. Debug messages from the standard actions from crm~avw applicaiton are visible. My ZAction is in the package com.customer and i have maintained this entry in VisualManager\LogManager in property SingleTraceFile_UnrestrictedLcoations. Part of the code is pasted below. Pls help.
    public class ZAction extends BaseAction {
          private static final IsaLocation log = IsaLocation.getInstance(ZAction.class.getName());
             public ZAction()
              public ActionForward doPerform(ActionMapping mapping, ActionForm form, HttpServletRequest request, HttpServletResponse response)
                  throws ServletException, IOException
                log.debug("Entered ZAction");

    Hi,
    I had also faced similar issue.
    Try giving this way.
    Give this inside the doperform
         IsaLocation log =IsaLocation.getInstance(com.sap.isa.core.BaseAction.class.getName());
    Hope this helps
    Regards
    Antony

  • Can not import my wav. file, message "unable to decode and import selected wav/mp3 file"

    Please help, i don't know how to import my wav file. I checked to see if the settings are compatible
    and it seems like them are. The wav file im trying to import is: 88kbps, 11kHz...

    I don't think so, if its not how do I get it to be?
    (Embedded image moved to file: pic07711.jpg)
    Jackie Stjepanovic
    Trainer
    Staff Development
    Automobile Customer Service (ACS)
    (310) 781-4627
                                                                                    Captiv8r                                                 
                 <[email protected]                                        
                 >                                                          To
                                           Jackie Stjepanovic             
                 11/23/2010 08:56          <[email protected]>
                 AM                                                         cc
                                                                                    Subject
                 Please respond to         Can not import my
                 clearspace-974018         wav. file, message "unable to  
                 851-110472-2-3295         decode and import selected wav/mp3
                 [email protected]         file"                          
                     dobe.com                                                                               
    Is it PCM encoded?
    Cheers... Rick  
    http://www.robowizard.com/pc.gif
    Helpful and Handy Links
    http://www.gooberguides.com/ProductPages/Captivate/Captivate5Foundations.htm
    http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=5
    http://www.ShowMeSolutions.biz
    http://sorcererstone.wordpress.com/
    http://www.gooberguides.com

Maybe you are looking for