System allow GR for a material without profit center maintained it it while Doc. splitting is active

Dears,
My client in the Go-live phase and there is an issue related to GR a material without having a profit center in it's master data, the system allow receipt 100 PC and when reversing the GR from MIGO the system display the error "Balancing in profit center is not filled" !!
so when we try to maintain a profit center in the material master data the system display error that the material already has a balance Q!
i mean why is the system allow the GR to happened if the material does not have a profit center
Note: i checked the configuration for Doc splitting and it's already maintained in the right way !.
Thanks and best regards,
Ahmed Samir

Hi,
When GR is happens document splitting has not activated????
Regd,
Khan.

Similar Messages

How to prevent the system to post without Profit Center

Hi All,
SAP has posted some transactions without profit center being filled, which is causing issue to our profit center reporting.
How can we force the system not to post the document without profit center and how to correct the existing one?
Regards,
Servesh

Hi,
You can pass on the exiting documents to the profit center accounting using transaction code 1KE8
For forcing the system to check profit center, please apply OSS note 1249888:-
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1249888]
Alternatively, you can define validations. But best is to use this OSS note.
Regards,
Garuav

Is it possible to Create Material Master without Profit Center ?

Hai,
      1) Is it possible to Create Material Master without Profit Center ?
      2) How SAP System Validate Profit Center in material master. ? is it material Type wise ?
      3) Whether PO Order Creation,GRN & MIRO Possible for those material Master without Profit Center.?
Kindly Explain me clearly..
Thanks & Regards,
Swetha

Hi,
Profit center is at the plant level.
You can create material master even with out a profit center.This field will be there in the costing view and and general sales/plant data.
while creation of the materila master if do not select these views system will not ask for that.Normally it is pertaining to the costing analysis.
A profit center manager is held accountable for both revenues, and costs (expenses), and therefore, profits. What this means in terms of managerial responsibilities is that the manager has to drive the sales revenue generating activities which leads to cash inflows and at the same time control the cost (cash outflows) causing activities. This makes the profit center management more challenging than cost centre management. Profit center management is equivalent to running an independent business because a profit center business unit or department is treated as a distinct entity enabling revenues and expenses to be determined and its profitability to be measured.
Business organizations may be organized in terms of profit centers where the profit center's revenues and expenses are held separate from the main company's in order to determine their profitability. Usually different profit centers are separated for accounting purposes so that the management can follow how much profit each center makes and compare their relative efficiency and profit. Examples of typical profit centers are a store, a sales organization and a consulting organization whose profitability can be measured.
For more info,please refer
http://help.sap.com/erp2005_ehp_04/helpdata/EN/cc/36428094f311d2b47a006094b9b0a5/frameset.htm,
Regards,

Production Order for a material without BOM and Routing

Is it possible to create a production order for a given material without routing and BOM, I know we can
create a production order for a material without a BOM (with a default routing) just wanted to check with
the above criteria
Thanks in Advance!!

Members:
Thank you for your valuable replies and time
Santosh:
Tried what you have mentioned, but system still picks up a default routing
Kaushik:
Maintained Default values in OPJG for the given order type, but system still picks up
default routing
Mangalraj:
have no issue in creating a production order without a BOM, but I am trying to see
is there a way where I can create a production order without a BOM and routing (not
even default operation )
Any suggestions on how to create a production order for a material without a BOM
and routing (not even default one )

How to run MRP for Bulk Material without using LTP

Hi, how can I run MRP for BULK material without using LTP.
Thanks in advance
BK

Hi,
Use trasnsaction code OPPQ and goto BOM Explosion and selection depends on
Field selected
No dependent requirements are created for informational purposes for bulk material items in the plant selected. This can improve system performance.
Field not selected
Dependent requirements are created for bulk material items in the plant selected. These dependent requirements are displayed in the planned order for informational purposes only. They are not considered in the net requirements calculation; that is, they are not included in material requirements planning (MRP) and are not displayed in the stock/requirements list
Reg,
Deepak.
Edited by: deepak k b on Nov 11, 2008 6:56 AM

Report: Material, customer order, internal order,... without Profit Center

Hello dear colleagues,
I can remember there is following report available:
Report where you can find out material, internal order... without Profit Center.
Can someone tell me fuction or program please.
Many thanks for your help.
I am lookinf forward to your answer.
all the best Erwin

Hello,
Thank you very much.
This is it.
I have just forgotten it.
all the best Erwin

Is it possible to activate Batch Management for a material without Class?

Dear Experts,
Is it possible to activate Batch Management for a material without having Class & Characteristics maintained. As my requirement is to procure Fuels in Batches only with external no. assignment without any parameters to be checked at the time of Goods Receipt? Batches are needed for Accountability purpose.
Regards

>
Chandan H N wrote:
> Dear Experts,
>
> Is it possible to activate Batch Management for a material without having Class & Characteristics maintained. As my requirement is to procure Fuels in Batches only with external no. assignment without any parameters to be checked at the time of Goods Receipt? Batches are needed for Accountability purpose.
>
> Regards
Please check this answered link:
Batch-classification view
If you want classify a batch, then you should have maintained the batch classification in material master which is either class 022 or class 023 (depends on your batch level set in cusotmizing). The material class 001 has no impact on the batch classifcition, it is what it is: a classification for the material.
Edited by: Afshad Irani on Jun 20, 2010 4:40 PM

Reverse the document (JV) which is posted without Profit Center.

Dear All
I am clearing the Customer with T-code F-32 and one of the clearing document is J/V which
was saved without Profit Center and the same is creating the problem by showing the error :-
Balancing field "Profit Center" in line item 004 not filled
Message no. GLT2201
JV Document is specific to last year and is not allowing to reverse also in the last year as it is asking
for cost center/ profit center.
Earliest Help required.
Thanks in advance.
Regards
VG

Hi Viral
Is the Profit Center Mandatory in document splitting for your implementation ?
If yes,
then check the link below
http://sapfin.blogspot.com/2009/06/issuesolution-accounting-document.html
If pofit center is mandatory and the original document was posted without a profit center,
You would need to contact SAP to get the original document corrected,
and follow the steps in the above link to prevent further occurrence of such cases.
Regards
Sach!n

How to update profit center in posted document without profit center ?

HI,
I want to know,
How to update profit center in posted document without profit center ?
So that i can get my profit center accouting report proper.
Thanks
Nilesh

There is a long story about profit center accounting. I assume you are using Classic PCA, this means you can see the PCA documents. And the solutions is below:
For P/L account, even you don't maintain cost element for it, if you maintain the profit center in the application (Frontend transaction), then PCA line items will be generated for this account.
For B/S account, if you maintain the default Profit Center with transaction 3KEH/3KEI, the PCA line items will generated for this account also.
Hints, don't maintain default profit center for AR/AP accounts, these accounts to be treated in periodic processing.
First, calculate the distribution/adjust by F.5D, then transfer it by 1KEK. for others account rather than AR/AP, use F.5E
For you case, if this account is P/L account, but you don't maintain profit center in the transaction, you can maintain default profit center as B/S account in 3KEH and 3KEI, then transfer it subsequently by transaction 1KE8.
Good Lucky!
Flex Yang

Authorization object for company code and profit center together

Hi all,
Please help me with the following requirement..
Company Code = ABCD
Profit Center = *
The user is authorized to run the report for company code ABCD only but any profit center within this company code.
2 Company Code = *
Profit Center = WXYZ
The user is authorized to run the report for Profit Center WXYZ only but any company code.
3 Company Code = *
Profit Center = *
The user is authorized to run the report for any company code and profit center.
The same user could have 1 and 2. So, in this case he should be able to run a report for the total inventory of company code ABCD, and a report for total inventory of profit center WXYZ only regardless company code.
He should not have visibility to other company codes inventory other then profit center WXYZ.
Regards,
Raj

Hi ,
Anyone please help me..
Regards,
Raj

Transporting Control Parameters for Actual Data in Profit Center Accounting

Hi Friends
Transport type of control parameters for actual data in Profit Center Accounting has been mentioned as Manual, when I try to manually create the Transport Request the Transport option in the Menu is disabled. Is there any other way to transport this configuration.
Regards
P Rajan

Hi
I think the settings that you are mentioning is through transaction 1KEF please clarify. Else elaborate where you have set the transport type manual.
Transport request are the domain of Basis people and is meant for transport from one client to another like quality to production.
Anand

System generate PR for Stock material when it goes below specific quantity

Hi Gurus,
My requirement is that system should generate PR for Stock material when it goes below specific quantity eg. 5 Qty. I think it is possible through MRP in that respective material master but I am not getting exactly what data I need to maintain their. Should I need to check/change any config setting?
Requested you to help me in this regard.
Regards,
Amol.

Hi Rakesh,
actualy i am new to this area, for one material i checked its available stock, it was ZERO & MRP Type is "ND-No MRP Planning".
I changed its MRP type as you said to V1 or VB and maintained its Reorder point as 1.
Now, as this material in not available in stock ie. it means it falls below the Reorder point(ie. 1). now i checked in MD04, system won't generated PR. afterwords, I created Maint order & reserved the same material. again i checked in MD04 but system won't generated PR this time also.
plz suggest...even i am confused that, should i need do anything which i missed out?
MRP Run means what i need to do?
Regards,
Amol.

Profit Center Maintaining in Material Master

Dear Friends,
One of my client has Posted a material(without maintaining Profit center in Materila master) to wrong profitcenter.
Now he is trying to maintain the correct profit center in Material master record for that material.
But system not allowing this as there is stock for that material in warehouse.
My client Requirement is,
He want to maintain the correct Profit center in Master Data without reversing the whole stock.
Can u pls tel me is it possible or not.
if it possible means kindly explain the steps.
Rgds,
Sankar D

If your client is very much strict enough to change the profit center in Material master only then you also tell him strictly that it is not possible & thats why the system is giving the error message.
Regards,
Indranil

SD Billing document without Profit center

Hello All,
Just have a problem on VF03, normally once sales order saved, the Invoice (VF03) will display Profit center directly.
But don't understand why, user said that they can't find Profit center in invoice. It cannot be automatically promote up for user.
Is that related to Account assignment for SD? or another other reason?
thanks
Marco

hi
if you are using the WBS in your project,
1.please check the profitcenter and WBS element assignment in CJ03 transaction code.
2. And if it is maintained check if Profitcentre automatically coming into material master ( mm01) or not.
make the settings for automatic determination of profitcentre in material master:
Entreprise controlling-> Profit center accounting-> Assignments to
ProfitCenters--->Material>Perform fast assignment.
3. Now it should automatically come into sales order- account assignment tab--> profitcenter feild
4. check the bellow description of www.sapscene.com
The sales order default is taken from the profit centre on the delivering plant / material master combination. If you do not want this, you can define substitutions to override this. A substitution is basically where the system allows you to specify your own piece of conditional logic to determine which profit centre to post to. You can base your conditions on a variety of fields available on the Sales Order. Usually used if you want to base your mapping on Sales elements rather than on products.
Thanks
Arshad

Link material to profit center at storage location level

Hello,
I have one plant 0001, two storage location assigned to this plant (MAG1, MAG2).
In " MAG1", I am keeping the consignment stock (stock blongs to my vendor), hence when I create the material at the storage location I need that profit center be set to PF1
"MAG2" is my own stock location, so when I create material at MAG2 level, I need that profit center be set as PF2.
Does standard SAP allows such scenario.
Is there any possibility to map this scenario
Many thanks for your help
Meher Souayeh

Dear,
Basically GUIXT script work mainly from Technical point of view..
Here they can write codes accordinly so that if you want to make any sort of changes in the application or if you want to put some restriction parameters then by writing codes, it is very much possible to get the desired output.
Hope this clears your doubt.
Utsav

System allow GR for a material without profit center maintained it it while Doc. splitting is active

Similar Messages

Maybe you are looking for