System Calculating HCess twise while posting MM Invoice through MIRO

Dear Gurus,
System calcuating Highter Cess twise while posting MM invoice through MIRO.
Please guide where could be problem... Pls provide standard steps need to verfy one by one to analysis the same.
Regards,
Venkat

Dear Santosh,
We are using TAXINN-Condition based method. We are maintaing JSEP as HCESs condition and JHX1 as Off-setting conditiong type.
But system calcuating condition value against both in IV........
Regards,
Venkat

Similar Messages

BTE while posting accounting document through MIRO

Hi All,
I am doing MIRO posting with PO,while MIRO posting accounting document is getting created for it. I need a BTE while posting accounting document through MIRO to trigger workflow(through event).
For direct accounting document posting I found the BTE 1030 to trigger workflow.
Thanks
Sree

Hello !
      The BTE required is "00001120     DOCUMENT POSTING: Field substitution header/items".
      Double click on this entry at FIBF transaction and you will find the function module SAMPLE_PROCESS_00001120
      Take a copy of this function module and go ahead.It is not possible to change the tables T_BKPF and T_BSEG. So, use the tables T_BKPFSUB and T_BSEGSUB.
Regards,
S.Suresh

How to get the pop up of Down Payment Clearing while posting an Invoice using MIRO tcode

Hi,
I am having a requirement where I need to display the Down Payment Clearing pop up.
Scenario: While posting an Invoice, user have to check whether he had done any downpayment for the Purchase Order, if so, then there will be a Information displayed saying "Down Payment for Purchase Order xxxxxxxxx exist". Then user has to click the Down Payment Clearing button in the header level, then a pop up window is displayed.
But now my requirement is when the Information Message is displayed, if I click enter button to goto next screen, that time itself I need to display the Down Payment Clearing pop window, rather than clicking the down payment clearing button in the header level.
Kindly suggest any user exit or badi to do this customization
Thanks & Regards,
Karthikeyan G.

Hi,
At the time of entering the invoice from MIRO/FB60, system gives a pop-up for downpayment clearing. If you go in the help, the following thing is mentioned in the part Procedure.
Procedure
Check whether a transfer posting or a clearing of special G/L transactions (for example down payments) is necessary after you have posted the present document.
Here SAP has clearly mentioned that we can do the clearing after posting of this document.
Regards,
Amit
Edited by: amit kulkarni on Nov 13, 2009 2:53 PM

Help with posting a vendor invoice through MIRO.

Hi,
We are having an issue with posting an invoice through MIRO where the purchase order has large number of lines cause it to exceed the 999 limit of SAP for the accounting document. While we are researching as to how to address this. I need help on how to get the invoice in and pay the vendor in the interim.
There are 171 PO lines, the max I believe that can be handled is 165 with out giving grief to the system.
Thanks.
Edited by: Chandra Muppavarapu on Sep 20, 2011 12:10 PM

Please check the below link, may be useful
more than 999 line items for an invoice

Cess not calculating while posting excise invoice

Hi,
while posting excise invoice cess(2% & 1 %) is not calculating on BED account.
pls tell what r the settings required to calculate cess on BED while posting.
Regards
Sunil

Hi
Ensure that you have maintained the excise defaults for Ecsess( Against ECS AP) and Shecess condition type( AP AT1 Cond) in
SPRO-Logisitcs general-Taxes on goods movement- India -Basic settings- Determination of Excise Duty- Maintain Excise defaults
Also check in PO the ECS and SHEcess values are non Zeroes
Regards
Sandeep
Edited by: sandeep13 on Nov 25, 2009 9:45 AM

Error while posting vendor invoice in F-43

Hi experts,
while posting vendor invoice with Tax code , i am getting the following error:
Posting is only possible with a zero balance; correct document
Message no. F5060
Here tax line item is not yet all displaying in simulation.
If I posted with tax code with ZERO percentage it is posting correctly.
where as same transaction I am able to post through transaction code FB60.
What could be the reason?
regs,
ramesh b

Hi
Please check and correct the respective line items , because your selecting incorrect GL account with respective posting keys
Example : You have exp gl a/c at first line items against vendor invoice posting's, normaly this vendor will post in first line item with posting key is 31 with vendor a/c and second line item 40 with exp GL a/c and same you will check any required inputs have missed out from this transactions.
Regards
CHOWDARY

Error while posting Excise Invoice

Hi Experts,
I have captured incoming excise invoice for an Import PO of Asset material.
GR has been made.
Also partial payment to vendor has been done through MIRO.
During check it do not show any ERROR message
While posting Excise invoice , error message is displayed "ACCOUNTING DOCUMENTS NOT GENERATED"
and immediately current session is closed
How to solve the problem?
Regards
Jai

Hi,
Import cycle :-
1. MIRO-Bill of Entry
2. Excise Invoice capture
3. Goods Receipt
4. Excise Invoice posting
5. MIRO -Vendor settelement
Tcode you used for capturing excise invoice - j1iex
posting the excise invoice. j1iex
Thanks
jai

Issue while posting the invoice in background using the WF-BATCH user

Hi Friends,
I am facing an issue while posting the invoice in background using the WF-BATCH user. I am using a invoice approval workflow where in when the approver approvers the invoice the invoice document get posted using a background method, which uses BO FIPP and Method POST and i am returning the Message Text to my workflow container from this method. When i see the log an exception is rasied from this method with an error message "V004: You are not authorized to change this document", but WF-BATCH is having SAP_ALL and SAP_NEW authorizations. If i try to post the invoice using the method from my user id it is getting posted. What could be the issue. Please advice.

Hi Sapient,
The Parameter, Roles would be different for the LOGIN USER and WF-BATCH.. So ask your administrator
to set the Roles & Parameters similar to that of LOGIN USER to WF-BATCH.
For further refrence check in SU01 giving the LOGIN USER and then check with WF-BATCH... you would
find the difference...
Hope this would help you..
Good luck
Narin

Default profit center when posting vendor invoices thru MIRO, FB60 and FB65

Hi,
My requirement is to default profit center at item level while posting vendor invoices using transactions MIRO, FB60 and FB65.
can anyone please provide some inputs on this.
Thanks for your help.
Lucky

Hi,you need to customize doc splitting.
1.You need to clasify all accounts from future document in Document Splitting-Classify G/L Accounts for Document Splitting(e.g. all accounts 2000) 03000-VENDOR.
2.in IMG: Classify Document Types for Document Splitting check for Document type transaction and Variant (e.g. Doc=KR, Trans.=1010, Variant= 0001)
3.In IMG: Activate Document Splitting check assigned method(e.g. 000012)
4. in IMG- Document Splitting-Extended Document Splitting-Define Document Splitting Rule
For find your method and transaction(e.g. Method=00012, trans.=1010) and double click on Item categories(on left of the top of screen)
There'd be record with category from first step (e.g. Cat.=0300), select one and double click on Base item cat. - there'd be Category 0300 and with check box Automatically split.
I hope it'd be helpful

How to find out the changes made during posting the invoice in MIRO

Hi Friends,
During posting an invoice in MIRO somebody changed the invoicing party which differs from the vendor which was in PO. Is there any way out to see the record of changes, like who has changed & at what time.
Replies will be highly appreciated.
Regards
Rutabhadra Panda

Hi Rutabhadra
you can see the Document change in the Table CDHDR
t code : SE 16
table CDHDR
object : IncomingInvoice
execute this
see the change time and name
Regards
Vikrant

Problem on Posting Parked Invoices during MIRO

Hi SAP Gurus!
Good day! I'm experiencing a problem during posting Parked Invoices thru MIRO. First I've parked invoices thru MIR7, then when I go to MIRO to post the invoices, the Parked Invoices are not reflected in the "Worklist". What is the possible problem here?
Hope you can help! Thank you.
Mik

Hi Gurus!
Thanks for the input, but I want the parked documents to be reflected in the posting of invoices (MIRO).
Actually, in both DEV and QAS servers, the parked invoices are reflected, but in PROD server it is not reflected. I don't know what happened. Can you please help.
Thank you.
Mik

Tax error while posting an invoice in SRM

We are using SRM 5.5 SP4, ECS and ECC 6.0. We are using vertex for tax caluculation and we configured the tax calculation to always occur in ECC.
One more important point is, client has decided to use invoicing in SRM. Now the problem is we ran in to so many tax related issues and we opened OSS messages for this but SAP did not help. Let me explain the problem in detail.
1) We used to get "Tax jurisdiction code could not be determined" error while creating shopping cart, but we implemented note 436760 and hardcoded a value and got rid of that error.
2) When we create a SC, the copy of PO is created in ECC and vertex is called for tax calculation and tax is calculated properly based on the tax hierarchy except when you use the Shipping Address (external), so when I used the delivery address other than plant, it should calculate based on that address but it was not doing that, its calculating based on the cost object's jurisdiction code. For this problem, we have implemented ME_ADDRESS BADI in ECC, but with this BADI, it is always taking delivery address's jurisdiction code, which is also wrong.
The tax jurisdiction determination should be from 1) Delivery address if its different from plant, else it should look in to the cost object, else storage location then plant.
So we implemented the above logic in that BADI and there is no problem with PO taxes.
3) When we create an invoice with reference to PO, the invoice verification program is always determining the tax jurisdiction code from plant even though the taxes on PO are calculated based on cost object, hence the IDOC is erroring out by saying there is a difference in tax.
So we implemented the user exit and used the same logic of tax determination and its fixed now.
4) Finally, we are trying to create invoices without PO's in SRM, here no tax calculation is happending in SRM, but when we try to post the invoice in to ECC, we are getting the following error
"SAX processing failed on input stream#SAX processing failed when attempting to add child element to parent. (parent element=com.vertexinc.tps.common.domain.LineItem, child element=com.vertexinc.tps.x.."
So I am not sure how to fix this, we are at the dead end now out of ideas, so trying to get some help from experts like you about looking at this problem in a different angle. Now there are a couple of questions I can ask you
1) Did we do something wrong by selecting R/3 as the tax calculation system, if not is it difficult to fix this error and move forward?
2) What if we need to change the design and start calculating the taxes in SRM by connecting SRM to Vertex, will there be any new challenges? and do you have any config doc for this? Also we are implementing this rollout for US, Canada and Mexico companies.
I would really appreciate if you can reply me with your valuable input. You can also email me if @ [email protected]
Thanks a lot,
Sreedhar

Hi
It's recommended to have the same Tax related configuration data replicated in SRM system from R/3 as well.
I don't recommeded you to go with Hard-coding of tax codes.
We have faced similar issues with Delivery address and we have to solve it using our custom logic inside the BBP_DOC_CHANGE_BADI and BBP_CREATE_PO_BACK BADIs.
Anyways, send the detailed business requirements to my mail which are already having with you. )
I will definitely help you out.
Please refer to following threads as well.
sales tax gurus
How to display country related tax codes in SRM
e-Invoice tax calculation.
Tax code T1 does not exist for jurisdiction code error in shopping basket
Drill down facility not working for Tax codes ....Urgent!!!!!
Tax Issue
Tax Calculation
Tax setting in Extended Classic Scenario
Withholding Tax in SRM5.0
IDOCS for Tax Information
Taxes in Bid Invitation
Hope this will help.
Please reward suitable points, incase it suits your requirements.
Regards
- Atul

Error 'Enter GL Account' while posting and invoice line item in MIRO

Hello Gurus,
I am facing a rather wierd issue.
While posting a PO invoice in Tcode MIRO, its asking to enter the GL account in line items. Everytime I am entering the GL account and pressing the enter key, it wipes off the GL account clean and gives the same error 'Enter GL account'.
It seems like this error is happening at the very first line item of the invoice. System is able to accept the GL account in 2,3,4th lines. If I delete the first line item, whatever is the first line item in that screen adapts the issue.
Any help would be great as I have no clue what to do.
Thanks

Hello Priyadarshini,
could you inform the error message number and it complete long text?
Regards,
Mateus Grings

PO field not appearing while posting Vendor Invoice

Hello,
While posting an entry using FB01/ F-43, for posting key 31(Vendor Invoice), despite making Purchasing Document (Purchase Order) field optional in the field status group of both the posting key 31 as well as the Reconciliation (GL) Account, the Purchasing Document field is not appearing. Please provide the solution if it's possible to get this field while posting the entry.
Thanks and Regards,
Sumita

If you try to book vendor invoice through F-43 or FB01 t codes, then, the system would always show PO open for invoice verification.
In case of a PO, IV should always be done through MIRO t code.
Thanks.
VS

J1IEX, error while posting Excise Invoice

Dera Gurus,
While posting the excise invoice for the invoice which has already been captured at the time of MIGO, I am getting the error message " All Part I entries have been canceled for excise invoice 5810 2009"
I have checked the PO history and found that the GR has also not been canceled and moreover the entries are being posted in RG23A Part 1 table. The movemet type 101 has also been maintained for the updation of RG23A part 1
The only thing that I have found suspicious is while displaying the Excise invoice is that Quantity available for CENVAT credit is Zero. I think this field needs to populated. How does this this field gets populated.
Regards
Prabhjot Singh
Edited by: Prabhjot Singh Nayyar on Jun 15, 2009 10:11 AM

Dear All,
I have already checked the table for the Part 1 entry, the Part 1 register is getting updated but it is now allowing me to post the Excise Invoice. As soon as I try to post the Excise Invoice, it gives me the error message " All Part I entries have been canceled for excise invoice 5810 2008 "
Regards
Prabhjot Singh

System Calculating HCess twise while posting MM Invoice through MIRO

Similar Messages

Maybe you are looking for