System Clipboard - I want to check system clipboard

Hi
I Want to check system clipboard on regular interval , my forms interact with
another application in VB , That application send some value to system clipboard
i want to check if values being send in system clipboard or not , if it has being
send then my form perform some task.
I know copy_region and paste_region command but that does not solve the problem.
i Need to check weither the values has come to system clipboard .
If u have solution please help .

Also, if they have your CC info in their iTunes, I suggest giving them an -> iTunes allowance or -> iTunes Gift card instead of the CC info.
Then you do not have to worry about how much they are spending.

Similar Messages

  • Bought iworks family via download. Apple told me to copy onto usb and then i could transfer to other family members. However, when gragged off usb onto desktop it will not work. Checked system requirments and everything fine. anyone know what the problem

    Hi. Bought iwork family as a download rather than on DVD. Want to transfer to other macs in household. Apple told me to transfer to USB stick and then put on other macs. Doesn't work and get message saying "keynote cannot be opened due to a problem". Same problem for .pages and .numbers. I have reinstallled but same problem. Have checked system requirements and everything seems fine.Any one have any ideas how to solve this. Thanks

    I'm an applications developer and also run a part-time videography business. As such, I require more than 3.12GB of RAM. That is the physical limitation of a 32bit system. Pointless to stay on 32bit if you plan on having more than that much RAM.
    I'm also not about to pay someone to fix my PC when I can do it myself. I was originally hoping for someone who had experienced the problem before to point me in the right direction so I didn't have to spend so much time trying to figure out what the issue was for myself.
    Basically, in the end the problem was caused because right at the point in time when I chose to uninstall, and reinstall; Apple released a new version of iTunes. This version in turn had a requirement of iOS 4.2 to sync with the iPhone. This is a pretty embarrassing for Apple that they would release software reliant on other software before said software was released.
    Had I realised I was downloading a newer version at the initial point of installation, this wouldn't have been an issue. I could've easily have rolled back iTunes to the previous version and gotten on with my life.
    Another issue is that iTunes is not actually a 64 bit application. It masquerades as one to allow installation on the 64 bit platform.

  • How to Check System Preference Settings with Time Machine

    I just found and fixed a problem caused by a bad System Preference/Universal Access
    setting and would like to go back in my Time Machine backup to see where the
    error was made. I may have been too quick to blame the 10.5.3 update on the
    problem so wanted to look back in time.
    The problem is i don't know how to check System Preferences using the Time Machine.
    Any suggestion?

    If you're looking for specific settings, the short answer is you cannot. You can open the .plist files and try to find the specific option you're looking for, though it might not be too easy to decipher some of the contents of the .plist file. For the most part they're just lists of attributes and settings. For instance, here's a very small chunk of my Finder .plist file:
    <key>All Images.cannedSearch</key>
    <dict>
         <key>SidebarWidth</key>
         <integer>162</integer>
         <key>ToolbarVisible</key>
         <true/>
         <key>ViewHeight</key>
         <integer>1116</integer>
         <key>ViewStyle</key>
         <string>icnv</string>
         <key>WindowBounds</key>
         <dict>
              <key>bottom</key>
              <integer>1200</integer>
              <key>left</key>
              <integer>56</integer>
              <key>right</key>
              <integer>1920</integer>
              <key>top</key>
              <integer>84</integer>
         </dict>
    </dict>
    <key>AnimateInfoPanes</key>
    <true/>
    <key>AnimateSnapToGrid</key>
    <string>true</string>
    <key>AnimateWindowZoom</key>
    <true/>
    Each "key" is followed by an attribute, so for instance the "SideBar Width" key is given the "Width" integer attribute of 162. However, some keys have multiple entries, such as the "WindowBounds" key having sub-keys of "bottom", "left", "right", and "top".
    These values are finder preferences, though are not accessible via the finder's preference settings. However, buried deep in the Finder's .plist file are some of the user-editable settings:
    <key>ShowHardDrivesOnDesktop</key>
    <true/>
    <key>ShowMountedServersOnDesktop</key>
    <true/>
    <key>SidebarSearchesSectionDisclosedState</key>
    <false/>
    If you can find the attribute you're looking for, then that may help you narrow down which version of a .plist file to restore, though not all of them are straightforward legible text. Some have bizarre strings of seemingly random characters that only the application can interpret.
    Message was edited by: Topher Kessler

  • ATP Check Issue - No business system could be determined for logical system

    Dear all
    Got an issue while executing ATP check on a planned order in product view,
    with a message: "No business system could be determined for logical system"
    CIF setting wise:
    regular business system group maintained and assigned in place,
    master data wise:
    business system group info fine in product master,
    Is there anywhere suggested to check under ATP setting:
    category, check mode, business event, check control/check instruction?
    Your kindest enlighting is appreciated,
    Thank you,
    mandy

    Dear Mandy,
    usually this error is caused by a missing customizing entry:       
    spro:                                        
    Integration with SAP Components
       Integration via APO Core Interface (CIF)
         Basic Settings for Creating the System Landscape                             
           - Maintain Business System Group
           - Assign Logical System and Queue Type :
    Please read the documentation for these two transactions and create the systems.
    You need to specifiy there all systems that are in your BSG. The documentation for the customizing of 'name logical system' in APO  says:                                                                               
    To enable the transfer of data between SAP R/3 and SAP APO, you need to name both the SAP APO system in which you are working and the SAP R/3  system to which you want to transfer data as logical systems.          
    I hope this helps.
    Regards,
    Tibor

  • Photoshop Elements 8: Installer freezes while checking system profile at 80%-90% (Mac OS)

    Hi All,
    In the last two months, we have observed that due to OS upgrade issues and some java script issues, some of the PSE 8 Mac users were not able to go past "Checking System Profile" check initialization dialog after 80-90% progress and installer welcome screen never launched....we dubug the issue, found a workaround and have created a Tech doc for the same. It took some time because we wanted to make sure that this works in all the cases or not. Here is the link of the Tech Doc, please bookmark the same and help the users who have been running into such issues...
    http://kb2.adobe.com/cps/825/cpsid_82532.html
    Please get back to us, in case there are any queries/concerns related to the tech doc..
    Regards,
    Ankush

    Hi,
    Attached are the logs from \library\logs\Adobe\Installers
    I cleared out the logs, ran PSE Setup until it hung then did Force Quit on
    Setup and attached the logs.
    Thanks for your attention,
    Gary
    From: Ankush Ved <[email protected]>
    Reply-To: <[email protected]>
    Date: Mon, 16 Nov 2009 07:33:58 -0700
    To: Gary Nelson <[email protected]>
    Subject: PSE 8 Setup hangs (80% complete) with checking
    system profile message
    Hi,
    Can you please send in the log files which can be obtained from the below
    location:
    \Library\Logs\Adobe\
    There must be log files for the PSE 8 installer. Delete them once and then
    try to install PSE 8 again, if you are not able to then attach the newly
    created log files in the forum.
    Thanks & Regards,
    Ankush

  • I recently purchased an iMac with Maverick system. I want to know can I install my Photoshop CS5  on this computer then upgrade it to CS6 without a months charge in the cloud?

    I recently purchased an iMac with Maverick system. I want to install my Photoshop CS5 on it, is that okay?
    Then I want to update it to CS6 without the iCloud purchase monthly (don't want that, want a one time charge)???

    As per System requirements | Photoshop, PS is not officially supported on Maverick and you might face several compatibility issues as well. However, we have many users who are still using CS5 on Mavericks. So, if you want you can give it a try and check it for your self.
    As far as CS6 is concerned, you can get PS CS6 perpetual version easily from Adobe.com Creative Suite 6
    Hope that Helps!
    ~ Arpit

  • How to check system status from Windows command line?

    Does anyone has an idea how to check system status from Windows command line? In UNIX we use startsap check, unfortunately I didn't find an appropriate command provided by SAP.
    The only idea we have is to use
    tasklist /FI "Username eq SAPService<SID>" | find "disp+work"
    which isn't as nice as startsap check.

    Hi,
    In windows you can use the command
    go to profile directory in command prompt and the give the following command to check the status of the instance.
    sapstart check pf=START_DVEBMGS<nr>_<hostname>
    that means you need to mention start profile or instance profile. So that it will say whether the instance is running or not.
    If you want any other information please reply back to me.
    Thanks,
    Chaitanya.

  • Satellite Pro U200-10I - How to disable check system on start up?

    :x Hi,
    I have Toshiba Satellite Pro U200-10I and I want to disable the check system as it is time-consuming for the machine start up. Is there a way to diable that?
    Nedd your help!!:D

    If you are referring to CheckDisk, just let it run through and it should stop running after that, until the system crashes or the power shuts off while in Windows.
    If it keeps on appearing, test the Hard Disk for errors by using DFT.
    DFT Download: http://www.hitachigst.com/hdd/support/download.htm#DFT
    Download the ISO File and burn it to a CD-R Disc (There is also a Floppy Disk version if that's easier).
    If you dont know how to burn an ISO file, read this guide: http://www.petri.co.il/how_to_write_iso_files_to_cd.htm
    Restart your laptop and boot from the DFT Disc.
    Choose the "Advanced" Test and let it run (it may take an hour or so).
    If you see a red message box, the HDD is faulty.
    An error code 0x70 means there are bad sectors and the HDD needs replacing.

  • Installing CS4 "checking system profile" freeze (FIX!)

    Hey guys,
    I dug thru this forum for an answer to my challenge and found NOTHING that solved my problem.
    Specs
    Mac OS 10.5.7
    2GB Ram
    2.8Ghz Processor
    160GB Hdd
    Adobe Creative CS4 froze at "Checking system profile" and then I even left it overnight with
    no change, tried verifiying the disks etc...
    Tried a ton of solutions on here, even the adobe cleaner which woudln't even show an install listed.
    What I did as a last ditch guess. I right clicked on the setup package, choose "show package contents"
    double clicked the mac osx folder, double clicked setup from there...
    It opened a terminal window showing begin adobe setup,UI MODE: Full Gui
    then some errors hdiutil-attach failed -rsource busy
    Then BOOM af ew seconds later it typed "logout" and started installing.
    No problems from there.
    Just wanted to put something back into the pot of ideas to try.

    After more searching I found a fix that seemed to work but my experience not completely identical as before (http://forums.adobe.com/message/2236990#2236990)
    I right clicked on the setup package, choose "show package contents"
    double clicked the mac osx folder, double clicked setup from there and got a message that process was already running and to quit which I did in Terminal which had opened when I clicked on setup.  That quit the installer which was hung up as before. I double-clicked the setup in the package contents again, and a new terminal window came up, I entered admin pw which was requested, and then installer ran in Terminal  and got a window to enter my (legal) serial number; installer then read DVD installer disks.  Here is log of successful terminal session (username is Tucana):
    Tucana:~ march2012$ /Volumes/Adobe\ CS4\ Design\ Premium\ Disc\ 1/Adobe\ CS4\ Design\ Premium/Setup.app/Contents/MacOS/Setup ; exit;
    Begin Adobe Setup
    UI mode: Full GUI
    2012-03-06 12:19:22.395 Setup[538:913] Can't open input server /Library/InputManagers/QuicKeysIM
    2012-03-06 12:20:14.804 Setup[560:913] Can't open input server /Library/InputManagers/QuicKeysIM
    logout
    [Process completed]

  • Windows XP CS4 Upgrade Install hangs at Checking System Profile...

    Problem: When installing from DVDs, the "Checking System Profile..." progress bar makes it to 90%, then hangs, causing you to abort using Task Manager. Changing startup and services settings, or disabling antivirus software doesn't help.
    Here's what got me past the hang.
    My guess is that it's a DVD player issue. These install disks thrash like crazy during installation. I did this:
    1. Copy the "Application 1" disc contents to a folder on your hard drive then run setup.exe from the folder the same as you would from the DVD (see Adobe install instructions).
    2. The "Checking System Profile..." progress bar completes and gets you to the serial number entry page.
    3. Enter your serial number and let Disc 1 install from your hard drive.
    4. When the installer asks for Disc 2 in the c:\ drive (which can't be done), cancel the installation. You'll get some troubleshooting information and links that you may find interesting. Exit the installer.
    5. NOW try to install Disc 1 from your DVD drive. Again you get "Checking System Profile...", but since you've already entered your serial number, you get the install window for installing or reinstalling CS4 components. Check the programs that you want to install, then proceed. It's working for me so far.
    Good luck,
    J.

    Repy to Jeff K (number 1 topic see top of page):
    Your method worked for me THANK YOU FOR POSTING YOU ARE A GODSEND!
    This is what I did to make it work:
    1) Copied contents from App1 & App2 DVD's. (can take a while, good time to get a cuppa coffee!)
    2) Pasted them into separate folders on my hard drive (named them Adobe CS4 App1 & Adobe CS4 App2
    3) Ran the App1 setup.exe program from the Hard drive and in a few minutes the serial number page appeared (which didn't appear in the many attempts I have done this weekend so I knew this was working well)
    4) Setup goes through the process as you would expect.
    FYI:
    - The virus & firewall did not affect the installation
    - I did use the cs4cleaner but only found 'Adobe Setup' that was linked to anything on my system
    - I did all other 'Adobe support suggested' work arounds, but none worked for me
    - Jeffs suggestion of copying files to Hard drive is the only one that has worked
    - Some suggestions say to remove flash player...don't bother because it's required for other programs and it gets upgraded with the install anyway so no need to uninstall. it caused problems for my HP Officejet 8500 all in one when i did uninstall it...save yourself the extra issues.
    - Dual monitors and graphics cards aren't the issue so don't change any settings there, i have dual monitors didn't create the issue for me.
    I'm running XP SP3 on PC with a fresh install of CS4 (not an upgrade).
    hope this helps

  • Check system, press f1 . . Help!

    My m200 was setup to boot with pxe as 1st priority.(but my m200 really boots with the HD) When I booted this morning the pxe booting hanged, So I turned it off then turned it back on. Afterwards a message flashed "*Error cmos bad checksum*"; It then rebooted automatically by itself, afterwards the message "*Check System, Press [F1]*" first appeared. I keep pressing F1 and changing my BIOS settings to match my previous setting, but the thing is I cant change my BOOT PRIORITY to what it used to be. The "LAN" part of the boot priority option dont want to be set as 1ST priority anymore. Can a BIOS reset fix this or does this mean of bigger problem (Board Problem?) , Im all ears to your opinions on this.

    Go inside the BIOS and press Home to load the defaults...End to save...
    oOo
    *Read EULA before installing any software.

  • Apple, please fix this bug.  Sending scanned images to "Pictures" is not what I want nor what I was able to do in every previous operation system.   I want to save all scanned items in a specific folder - NOT "PICTURES"  Please fix this bug NOW!

    Apple, please fix this bug.  Sending scanned images to "Pictures" is not what I want nor what I was able to do in every previous operation system.   I want to save all scanned items in a specific folder - NOT "PICTURES"  Please fix this bug NOW!

    I only use Image Capture, so I can't speak for other software.
    Here is how I select a Scan To destination:
    If you are using the minimal details screen, you should have the same submenu to the left of the page size.

  • After an update itunes will not open. there is a missing msvcr80.dll i tried to re install itunes and now it says check system services. I have full admin to pc

    after an update itunes will not open. there is a missing msvcr80.dll i tried to re install itunes and now it says check system services. I have full admin to pc

    turingtest2 post 01/2014: MSVCR80.dll missing, cannot install iTunes - https://discussions.apple.com/message/24618776
    iTunes for Windows: Missing MSVCR80.dll - https://sites.google.com/site/appleclubfhs/support/advice-and-articles/itunes-wi ndows-missing-msvcr80-dll - install as administrator.

  • I have created a quotation in CRM system. I want that to be downloaded into ECC, so that, I can create a sales order there with reference to that quotation. So, what are the parameters that I need to set in CRM system so that my quotation gets replicated?

    Dear Experts,
    I have created a quotation in CRM system. I want that to be downloaded into ECC, so that, I can create a sales order there with reference to that quotation. What are the parameters that I need to set in CRM system so that my quotation gets replicated without any error?
    Please help me in this regard. An early and in detail step by step guidance is highly appreciated.
    Thanks,
    SMTP

    It may be best to recreate the folder and the smart playlists from scratch.
    tt2

  • The Firefox checking system says that Shockwave Flash 10.1.82.76 (10.1.r82) is VULNERABLE and I should immediately update it. When updating I can find no higher version of Shockwave Flash that is compatible with my system. What should I do ?

    1. I have an eMac running Mac OS 10.5.8
    Processor Name: PowerPC G4 (3.3)
    Processor Speed: 1 GHz
    Number Of CPUs: 1
    L2 Cache (per CPU): 256 KB
    Memory: 1 GB
    Bus Speed: 133 MHz
    2. I use Firefox 3.6.24 as my browser
    3. The Firefox checking system says that the version of Shockwave Flash that I have installed, namely 10.1.82.76 (10.1.r82), presents a security VULNERABILITY and that I should immediately update it or disable it. On attempting to find an update I cannot locate a higher/more advanced version of Shockwave Flash that is compatible with my system. What should I do ?
    Thankyou for any assistance.

    The latest version for your system seems to be Flash 10.1 r102
    Flash Player 10.1 Release Notes: (latest version for Mac PPC)
    * http://kb2.adobe.com/cps/838/cpsid_83808.html
    See (Released 11/04/2010) Flash Player 10.1.102.64 and 9.0.289.0 (126 MB)
    * http://kb2.adobe.com/cps/142/tn_14266.html Archived Flash Player versions

Maybe you are looking for

  • Tidy xml: clean xml data source form and characters

    Hi, the xml data set that I'd like to display with spry includes many special characters such as < and >, which are also used by xml to separate the individual data elements. How can I replace those when the data are read, so that the data display co

  • Problem With Business Object and printing job

    Hello, We are encountering a problem with the application "Business Objects FINANCE", and we would need your help quickly. In the application , itu2019s impossible to print Consolidated Subsidiaries nor the Securities Held. If we try so, the applicat

  • CAN THE MS OFFICE FILES MOVED TO TRASH BE  RETRIEVED

    I JUST DOWNLOADED APPSCLEANER FROM NET AND ACCIDENTALLY REMOVED SOME FILES OF MS OFFICE  TO TRASH. NOW SOME OF THE APPLICATIONS ARE NOT OPENING OR WORKING PROPERLY AND SHOWING EROR MESSAGE. I TRIED BY DRAGGING THE DELETED FILES/ITEMS TO THE DESKTOP B

  • Problems with iCloud shared photos

    Hi all Updated all ios devices to 7. All good it seemed - but tonight took some pics on my 4s and created a shared stream. The person I invited (also on iOS 7) has not had invite and it does not appear on my other devices. Anyone else had anything si

  • MDM with Biztalk

    Hello there, 1. MDM with biztalk ... It's possible? or i need XI/PI? 2. Licenses? Goodbye, and thanks!