System Configuration - SAP Web AS Connection - connection tests error

hi
I have a SAP ECC 6.04 and sap portal 7.01
When I entered in option System Administration / System Configuration / System Landscape / Portal Content Tree / Systems / SAP_ECC (System created by me)
I founded the following error (in SAP Web AS Connection / Tests the connection to an SAP Web Application Server )
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
7. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (htc-svr-erp.humantech.es:4200)
5. The host name htc-svr-erp.humantech.es was resolved successfully.
6. The Web AS ping service http://htc-svr-erp.humantech.es:4200/sap/bc/ping was not pinged successfully. If the ping service is not activated on the Web AS, you can try to call the ping service manually.
7. An HTTP/S connection to http://htc-svr-erp.humantech.es:4200 was not obtained successfully; this might be due to a closed port on the Firewall.
...also see a red "X" near a title SAP Web AS Connection
I have other system (old system). It dont have the last error, I show the properties of the "old system"(without error) and the "new system" (with error) for your analisys
In "old sap system", stack java + abap
http://img830.imageshack.us/img830/9755/oldsysstack.jpg
In "new sap system", stack java separated abap
http://img97.imageshack.us/img97/8627/newsysstack.png
In Portal
In "old system", I created "SAP_HCM" System
In "new system", I created "SAP_ECC" System
The "Connector" view (Object Option)
http://img706.imageshack.us/img706/3776/oldsysconnector.jpg (Old System)
http://img269.imageshack.us/img269/914/newsysconnector.jpg (New System)
*The "Internet Transaction Server (ITS)" view (Object Option)
http://img824.imageshack.us/img824/5043/oldsysits.jpg (Old System)
http://img822.imageshack.us/img822/1314/newsysits.jpg (New System)
The "User Management" View (Object Option)
http://img20.imageshack.us/img20/8646/oldsysuserman.jpg (Old System)
http://img97.imageshack.us/img97/5339/newsysuserman.jpg (New System)
The "Web Application Server" View (Object Option)
http://img101.imageshack.us/img101/6155/oldsyswas.jpg (Old System)
http://img69.imageshack.us/img69/434/newsyswas.jpg (New System)
My question of this view is: Is correct the Server port "4200" in New System? or Is correct the Server port "80+instance" in Old System?
I run tcode RZ10 in backend after "Extended Maintenance"
http://img15.imageshack.us/img15/8711/oldsysrz10.jpg (Old System) (Here do not exist parameter icm/server_port_1 )
http://img512.imageshack.us/img512/9268/newsysrz10.jpg (New System) (Here do not exist parameter icm/HTTP/j2ee_0 , is it correct?)
Which of these two syntax is correct? 80 + instance or 4200 (any number of port)
also in SAP Systems, I run tcode SICF and enter in "Port Information"
http://img265.imageshack.us/img265/5281/oldsysport.jpg (Old System) (two ports)
http://img441.imageshack.us/img441/7905/newsysport.jpg (New System) (three ports)
The "Information" view (Object Option)
http://img13.imageshack.us/img13/2012/oldsysinfo.jpg (Old System)
http://img714.imageshack.us/img714/6941/newsysinfo.jpg (New System)
My question is, Why in "Old System" the parameter "Created By" is "pcd_service"? is automatic?
because the paremeter "Created by" is the user j2ee admin , I created the system manually or Should the user create pcd_service ?
The "No Category" group (Object Option)
http://img827.imageshack.us/img827/8215/oldsysnoncat.jpg (Old System)
http://img193.imageshack.us/img193/3800/newsysnoncat.jpg (New System) (in this System does not exist the parameter sysnr , is it correct?)
The "Permisions" Option
http://img825.imageshack.us/img825/886/oldsyspermin.jpg (Old System)
http://img243.imageshack.us/img243/2057/newsyspermin.jpg (New System)
The "Delta Link Tracer" Option
http://img716.imageshack.us/img716/798/oldsysdelta.jpg (Old System) (two levels)
http://img828.imageshack.us/img828/8057/newsysdelta.jpg (New System) (three levels, is it correct?)
the other view the same (Old Sytem and New System)
The "Connection Test" Option
http://img412.imageshack.us/img412/5789/oldsystest.jpg
http://img243.imageshack.us/img243/5237/newsystest.jpg
Edited by: Ivan Quiroz on Sep 21, 2010 12:42 PM

Excuse me, because the message Editor has problems, I edited with html tags for best view 
 
 hi
 
 I have a SAP ECC 6.04 and sap portal 7.01
 
 When I entered in option System Administration /System Configuration /System Landscape / Portal Content Tree / Systems /SAP_ECC (System created by me)
 
 I founded the following error (in SAP Web AS Connection / Tests the connection to an SAP Web Application Server )
 
 SAP Web AS Connection
 Test Details:
 The test consists of the following steps:
 1. Checks the validity of system ID in the system object.
 2. Checks if the system can be retrieved from the PCD.
 3. Check whether a SAP system is defined in the system object
 4. Validate the following parameters: WAS protocol; WAS host name
 5. Checks if the host name of the server can be resolved.
 6. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
 7. Checks HTTP/S connectivity to the defined back-end application
 
 Results
 1. The system ID is valid
 2. The system was retrieved.
 3. The system object represents an SAP system
 4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (htc-svr-erp.humantech.es:4200)
 5. The host name htc-svr-erp.humantech.es was resolved successfully.
 6. The Web AS ping service http://htc-svr-erp.humantech.es:4200/sap/bc/ping was not pinged successfully. If the ping service is not activated on the Web AS, you can try to call the ping service manually.*
 7. An HTTP/S connection to http://htc-svr-erp.humantech.es:4200 was not obtained successfully; this might be due to a closed port on the Firewall.

 
 ...also see a red "X" near a title SAP Web AS Connection
 
 I have other system (old system). It dont have the last error, I show the properties of the "old system"(without error) and the "new system" (with error) for your analisys
 
 In "old sap system", stack java + abap
 
 <a href=http://img830.imageshack.us/img830/9755/oldsysstack.jpg>Stack Java + Abap<a>
 
 In "new sap system", stack java separated abap
 
 <a href=http://img97.imageshack.us/img97/8627/newsysstack.png>Stack Java and Stack Abap</a>
 
 In Portal
 
 In "old system", I created "SAP_HCM" System
 In "new system", I created "SAP_ECC" System
 
 The "Connector" view (Object Option)
 
 <a href=http://img706.imageshack.us/img706/3776/oldsysconnector.jpg> (Old System)</a>
 <a href=http://img269.imageshack.us/img269/914/newsysconnector.jpg> (New System)</a>
 
 The "Internet Transaction Server (ITS)" view (Object Option)
 
 <a href=http://img824.imageshack.us/img824/5043/oldsysits.jpg> (Old System) </a>
 <a href=http://img822.imageshack.us/img822/1314/newsysits.jpg> (New System) </a>
 
 The "User Management" View (Object Option)
 
 <a href=http://img20.imageshack.us/img20/8646/oldsysuserman.jpg> (Old System) </a>
 <a href=http://img97.imageshack.us/img97/5339/newsysuserman.jpg> (New System) </a>
 
 The "Web Application Server" View (Object Option)
 
 <a href=http://img101.imageshack.us/img101/6155/oldsyswas.jpg> (Old System) </a>
 <a href=http://img69.imageshack.us/img69/434/newsyswas.jpg> (New System) </a>
 
 My question of this view is: Is correct the Server port "4200" in New System? or Is correct the Server port "80+instance" in Old System?
 
 I run tcode RZ10 in backend after "Extended Maintenance"
 
 <a href=http://img15.imageshack.us/img15/8711/oldsysrz10.jpg> (Old System) (Here do not exist parameter icm/server_port_1 )</a>
 <a href=http://img512.imageshack.us/img512/9268/newsysrz10.jpg> (New System) (Here do not exist parameter icm/HTTP/j2ee_0 , is it correct?)</a>
 
 Which of these two syntax is correct? 80 + instance or 4200 (any number of port)
 
 also in SAP Systems, I run tcode SICF and enter in "Port Information"
 
 <a href=http://img265.imageshack.us/img265/5281/oldsysport.jpg> (Old System) (two ports) </a>
 <a href=http://img441.imageshack.us/img441/7905/newsysport.jpg> (New System) (three ports) </a>
 
 The "Information" view (Object Option)
 
 <a href=http://img13.imageshack.us/img13/2012/oldsysinfo.jpg> (Old System) </a>
 <a href=http://img714.imageshack.us/img714/6941/newsysinfo.jpg> (New System) </a>
 
 My question is, Why in "Old System" the parameter "Created By" is "pcd_service"? is automatic?
because the paremeter "Created by" is the user j2ee admin , I created the system manually or Should the user create pcd_service?
 
 The "No Category" group (Object Option)
 
 <a href=http://img827.imageshack.us/img827/8215/oldsysnoncat.jpg> (Old System)</a>
 <a href=http://img193.imageshack.us/img193/3800/newsysnoncat.jpg> (New System) (in this System does not exist the parameter sysnr , is it correct?) </a>
 
 The "Permisions" Option
 
 <a href=http://img825.imageshack.us/img825/886/oldsyspermin.jpg> (Old System) </a>
 <a href=http://img243.imageshack.us/img243/2057/newsyspermin.jpg> (New System) </a>
 
 The "Delta Link Tracer" Option
 
 <a href=http://img716.imageshack.us/img716/798/oldsysdelta.jpg>(Old System) (two levels) </a>
 <a href=http://img828.imageshack.us/img828/8057/newsysdelta.jpg> (New System) (three levels, is it correct?) </a>
 
 the "System Aliases" Option
 
 <a href=http://img265.imageshack.us/img265/7574/oldsysalias.jpg> (Old System) </a>
 <a href=http://img256.imageshack.us/img256/9817/newsysalias.jpg> (New System) </a>
 
 The "Connection Test" Option
 
 I based in <a href= http://img64.imageshack.us/img64/6638/essalias.jpg> ESS SAP Documentation </a>
 
 In the seven point is diference (blue box) in the <a href=http://img412.imageshack.us/img412/5789/oldsystest.jpg> (Old System) (SAP_HCM System) (An HTTP/S connection to http://htc-svr-sap.humantech.es:8004 was obtained successfully.) </a> and <a href=http://img243.imageshack.us/img243/5237/newsystest.jpg> (New System) (SAP_ECC System) (An HTTP/S connection to http://htc-svr-sap.humantech.es:8004 was obtained successfully.)</a>
 
 I desactivated Firewall in my SAP Server and reviewed in <a href=https://forums.sdn.sap.com/thread.jspa?threadID=946905>SAP Forums </a> my problem but nothing
 
 Could This error also could be the problem that I get an error in the JCO Destination?
 
 <a href=http://img819.imageshack.us/img819/826/oldsysjcosso.jpg>(Old System) (Succesfully)</a>
 <a href= http://img822.imageshack.us/img822/4226/newsysjcosso.jpg>(New System) (com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Issuer of SSO ticket is not authorized)</a>
 
 because I configure SSO correctly (I configured last year SSO in "Old System"),I run tcode SSO2
 
 <a href=http://img709.imageshack.us/img709/7194/oldsyssso2.jpg>(Old System)SSO2 Tcode</a>
 <a href=http://img830.imageshack.us/img830/9704/newsyssso2.jpg>(New System)SSO Tcode</a>
 
 <a href=http://img185.imageshack.us/img185/9279/newsyssso22.jpg>(Old System) SSO2 Tcode Details</a>
 <a href=http://img227.imageshack.us/img227/416/oldsyssso22.jpg>(New System) SSO2 Tcode Details</a>
 
 <a href=http://img530.imageshack.us/img530/8710/newsyslog.jpg>(New System) In the SAP Logs: *** J2EE_ADM_DA1 | USERMAPPING.USE | USER.R3_DATASOURCE.J2EE_ADM_DA1 | | systemtype=[(none)], system=["UMESystemLandscapeDummy"], uses strong encryption=[false], remote user ID=[(none)] ***
</a>

Similar Messages

How to configure sap maxdb client to connect to SAP ERP system (SAP HR)

Hello all,
I am currently installing live cache for SAP ERP HR application(Idoc), can anybody tell me the sequence to proceed to configure SAP livecache with SAP ERP system. i am doing following steps
1. Install SAP DB using installation MAXDB CDs
2. Install SAP Livecache and standalone server SCM 5.0 using SAP ERP master and Livecache dvds.
3. install Livecache client fromSAP ERP master and livecache dvds between SAP ERP and livecache server.
4. configure in LC10, tcode.
but when i press on livecache monitoring in LC10 it gives me following error.
Command: DBMRFC
Parameter: -gsapfive -xsapgw00
SY-SUBRC: 8
Return Code
sap maxdb client

i tried the said things and after that i am getting following error in DB59, first three steps are successful but 4 one is failing.
Test Scope
1. Execute an external operating system command (DBMCLI)
2. Determine status using TCP/IP connection SAPDB_DBM (DBMRFC command mode)
3. Determine status using TCP/IP connection SAPDB_DBM_DAEMON (DBMRFC session mode)
4. Test the SQL connection (Native SQL at CON_NAME)
Application Server: <hostname>_<SID>_00 ( Windows NT )
1. Connect. test with "dbmcli db_state" Successful
2. Connect. test with command mode "dbmrfc db_state" Successful
3. Connect. test with session mode "dbmrfc db_state" Successful
4. Connect. test with "native SQL" ( LCA ) No connection
 SQL Code: 4008
 POS(1) Unknown user name/password combination
 For detailed information, see the developer trace for work process: 1
please see trace from file dev_rfc and dev_w0 below
log for dev_rfc
**** Trace file opened at 20110107 174356 Eastern Standard Time, SAP-REL 701,0,14 RFC-VER U 3 1016574 MT-SL
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
ABAP Programm: SAPLARFC (Transaction: )
User: MKUMAR (Client: 800)
Destination: IDOCTEST (handle: 2, , )
SERVER> RFC Server Session (handle: 1, 45030386, {9BAF1AE0-E29B-F1A3-9406-0019B9E204CC})
SERVER> Caller host:
SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
SERVER> Called function module: ARFC_RUN_NOWAIT
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
DEST =IDOCTEST
HOST =%%RFCSERVER%%
PROG =IDOCTEST
Log from dev_w0
A RFC 1485 CONVID 47150684i tried the said things and after that i am getting following error in DB59, first three steps are successfuk but 4 one is failing
trace from file dev_rfc is below
**** Trace file opened at 20110107 174356 Eastern Standard Time, SAP-REL 701,0,14 RFC-VER U 3 1016574 MT-SL
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
ABAP Programm: SAPLARFC (Transaction: )
User: ABC (Client: 800)
Destination: IDOCTEST (handle: 2, , )
SERVER> RFC Server Session (handle: 1, 45030386, {9BAF1AE0-E29B-F1A3-9406-0019B9E204CC})
SERVER> Caller host:
SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
SERVER> Called function module: ARFC_RUN_NOWAIT
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
DEST =IDOCTEST
HOST =%%RFCSERVER%%
PROG =IDOCTEST
A RFC 1485 CONVID 47150684
A * CMRC=2 DATA=0 STATUS=0 SAPRC=679 ThSAPOCMINIT
A RFC> ABAP Programm: SAPLARFC (Transaction: )
A RFC> User: abc (Client: 800)
A RFC> Destination: IDOCTEST (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 47149684, {FDB31AE0-D203-F1C0-9406-0019B9E204CC})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
A RFC SERVER> Called function module: ARFC_RUN_NOWAIT
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
M
M *****************************************************************************
M *
M * LOCATION SAP-Gateway on host <HOSTNAME> / sapgw00
M * ERROR program IDOCTEST not registered
M *
M * TIME Fri Jan 07 18:15:25 2011
M * RELEASE 701
M * COMPONENT SAP-Gateway
M * VERSION 2
M * RC 679
M * MODULE gwr3cpic.c
M * LINE 1778
M * DETAIL TP IDOCTEST not registered
M * COUNTER 715
M *
M *****************************************************************************
M
A RFC 1485 CONVID 47152747
A * CMRC=2 DATA=0 STATUS=0 SAPRC=679 ThSAPOCMINIT
A RFC> ABAP Programm: SAPLARFC (Transaction: )
A RFC> User: ABC (Client: 800)
A RFC> Destination: IDOCTEST (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 47151731, {FDB31AE0-D203-F1C1-9406-0019B9E204CC})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
A RFC SERVER> Called function module: ARFC_RUN_NOWAIT
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
Mani

SAP Web AS 6.40 SR1 - Error on installation (JC00 startup)

Hi,
I am trying to install SAP Web AS 6.40 SR1 on a Solaris 5.8 64 Bits machine.
I got the necessary packages from SWDC (see topic Web AS SR1 required software from SWDC) and started the process. Everything went fine until I got the penultimate step, when SAPInst tries to restart the Java Engine and synchronize something... After 20 minutes waiting, I am finally getting an error like this (sapinst_dev.log):
TRACE [syuxcaccmg.cpp:220]
 bool CSyAccountMgtImpl::isExisting(ISyAccountMgt::eAccountType accountType, iastring sName)
Account gbsadm already exists.
TRACE [syuxcaccmg.cpp:220]
 bool CSyAccountMgtImpl::isExisting(ISyAccountMgt::eAccountType accountType, iastring sName)
Account 0 already exists.
TRACE [syuxcuser.cpp:378]
 iastring CSyUserImpl::getHomeDirectory() const
account user="gbsadm" uid="5010" exists with parameter home="/sapmnt/"
TRACE [syuxctask.cpp:1242]
 CSyTaskImpl::start(bool)
A child process has been started. Pid = 21656
TRACE [syuxcaccmg.cpp:267]
 bool CSyAccountMgtImpl::isExisting(ISyAccountMgt::eAccountType accountType, iastring sName)
Account sapsys already exists.
TRACE [syuxctask.cpp:1242]
 CSyTaskImpl::start(bool)
A child process has been started. Pid = 21940
TRACE
 CJSlibModule::writeInfo_impl()
Output of /usr/sap/GBS/JC00/j2ee/os_libs/jcmon 'pf=/sapmnt/GBS/profile/GBS_JC00_blcsp01' is written to the logfile jcmon.log.
TRACE
 CJSlibModule::writeInfo_impl()
Execution of the command "/usr/sap/GBS/JC00/j2ee/os_libs/jcmon 'pf=/sapmnt/GBS/profile/GBS_JC00_blcsp01'" finished with return code 0. Output: snipped
TRACE
 CJSlibModule::writeInfo_impl()
J2EE Engine JC00 of SAP system GBS did not come up after 753 seconds: waiting for another 20 seconds.
I decided to restart the service by myself (as suggested by topic MUT-03011 Execution of the command "C:\usr\sap\P64\SYS\exe\run/jcmon.exe) and see what happens, but got the same error.
Are you able to help me? I have already tried this installation 3 times!!!
Thanks in advance
Fernando Urzedo

Hi Fernando,
to track the problem, you can have a look at the traces in the dev_jcontrol and dev_jcmon trace files located under the /usr/sap/GBS/JC00/work directory of your installation. If the dev_jcontrol file indicates an error in any of the bootstrap processes (bootstrap_<someID>), you can then further track the issue by having a look at the corresponding dev_boostrap_<ID> file in the same directory.
It is likely that the server does not start due to memory problems. If this is the case, have a look at this thread dealing with such a problem: jcontrol.exe J2EE Server stopped
Hope that helps!

SAP Web Application Server 6.40 Error

Hi. I am trying to install the SAP Web Application Server 6.40 but have encountered this error when extracting this file SCS.SAR with the SAPCAR.exe
Error Message:
SAPCAR: could not open for writing SAPCAR.exe <error 28>. The process cannot access the file because it is used by another proccess.
I have checked this proccess is not running at all. Or is it used by some other programs. Please advise.
Edited by: pong pong on Jul 30, 2008 3:58 AM

Hi,
If you are trying to uncar the SAR file try to do it with -R option
with target directory to extract files.
sapcar -xvf <SAR File> -R <drive>:\<DIR>\<DIR> .
I hope sapcar is trying to open a new sapcar file to throw the above error.
Hope it helps you out.
Rgds
Radhakrishna D S

SAP WEB Dispatcher for Two systems

Hi experts,
i want to configuration SAP web dispatcher for two hosts
web dispatcher has installed on saprate host( host are accessible via public ally) and other host contains two ABAP system are in same host.
i have configure two HTTP ports in the Web Dispatcher profile
icm/server_port_0 = PROT=HTTP, PORT=8888
icm/server_port_1 = PROT=HTTP, PORT=7777
In addition, you define the system assignments, as follows:
wdisp/system_0 = SID=ERP, MSHOST=ms_erp, MSPORT=8082, SRCSRV=*:8888
wdisp/system_1 = SID=CE1, MSHOST=ms_erp, MSPORT=8127, SRCSRV=*:7777
but i want to know how can do the url mapping i want to open WEBGUI for both ABAP systems.
and how can access?
Please suggest.
Regards,

Hi Vivek,
Check the below link, I think it would help you with the configuration.
One Web Dispatcher, Multi Systems with URL Prefixes
And also read the below document for the Mapping of one SAP Webdispatcher to Multiple Systems.
http://help.sap.com/saphelp_nw73ehp1/helpdata/en/b0/ebfa88e9164d26bdf1d21a7ef6fc25/content.htm
Regards,
Sushil

SAP Web Dispatcher - Object Cert doesn't exist.....?

Has anyone ever experienced this error before? This error came about when I created a "Verification PSE" in STRUST to move over onto the webdispatcher.
[Thr 3516] *** ERROR => secudessl_Create_SSL_CTX(): PSE "C:\Program Files\SAP\SAPWebDisp\DEV\<domain folder>\sec\SAPSSLC.PSE" not found! [ssslsecu.c 1354]
[Thr 3516] secudessl_Create_SSL_CTX: SSL_CTX_set_default_pse_by_name() failed --
secude_error 4130 (0x00001022) = "Object Cert doesn't exist"
[Thr 3516] >> -
Begin of Secude-SSL Errorstack -
>>
[Thr 3516] ERROR in SSL_CTX_set_default_pse_by_name: (4130/0x1022) Object Cert doesn't exist
ERROR in ssl_set_pse: (4130/0x1022) Object Cert doesn't exist
ERROR in af_pse_get_Certificate_static: (4130/0x1022) Object Cert doesn't exist
[Thr 3516] << -
End of Secude-SSL Errorstack -
[Thr 3516] *** ERROR => SapISSLAddCredential(): Error SSSLERR_PSE_ERROR trying to create CLIENT Credential
 for "C:\Program Files\SAP\SAPWebDisp\DEV\<domain folder>\sec\SAPSSLC.PSE" [ssslxxi.c 2278]
[Thr 3516] *** ERROR => Initialization of SSL library failed -- NO SSL available!
Also this error occurs when I tried to "export certificate" from STRUST.
[Thr 3384] >> -
Begin of Secude-SSL Errorstack -
>>
[Thr 3384] ERROR in SSL_CTX_set_default_pse_by_name: (4356/0x1104) PSEFile
ERROR in ssl_set_pse: (4356/0x1104) PSEFile
ERROR in af_open: (4356/0x1104) PSEFile
ERROR in secsw_open: (4356/0x1104) PSEFile
ERROR in sec_parse_PSEInfo_cont: (4356/0x1104) PSEFile
ERROR in d_PSEFile: (18/0x0012) decoding error for : "PSEFile"
[Thr 3384] << -
End of Secude-SSL Errorstack -
[Thr 3384] *** ERROR => SapISSLAddCredential(): Error SSSLERR_PSE_ERROR trying to create CLIENT Credential
 for "C:\Program Files\SAP\SAPWebDisp\DEV\<domain folder>\sec\SAPSSLC.PSE" [ssslxxi.c 2278]
[Thr 3384] *** ERROR => Initialization of SSL library failed -- NO SSL available!
What I'm trying to do is create the SSL connection between the dispatcher and the SAP Web AS.

Hi,
From the error it is clear that it is unable to access the SAPGENPSE.
Go the fallowing location c:\programfiles\sap\sapwebdisp\dev\domain\sec and see if there is sapsslc.pse file if this dosent exist fallow the below procedure.
go the c:\programfiles\sap\sapwebdis\ and execute the fallowing command
sapgenpse get_pse -p "c:\programfiles\sap\sapwebdisp\dev\domain\sec\SAPSSLS.pse" -noreq "CN=<FQDN>, OU=<InstallationNumber>, OU=SAP Web As, O=SAP Trust Community, C=DE
Please revert back if you have troubles.
Kind Regards,
vamsi.

Unable to install SAP webAS on Windows 2003

Hi Everyone , I am trying to install SAP WebAS Java 6.4. We use an Oracle Database and i want to deploy
our web apps on the SAP WebAS . I get this error during installation :
ERROR 2004-11-09 15:00:39
CJS-00081 Assertion failed: in
function sapdb_sql_query(db_nm, sql_s, db_node) {
var ret_s = "";
var sdbInst = new sdbInstance();
sdbInst.dbName = db_nm;
sdbInst.dbHost = (db_node == undefined) ? installer.getHostName() : db_node;
var r_arr = sdb_sql_query(sql_s, sdbInst);
ASSERT(arguments.callee, r_arr != undefined, "ERROR EXECUTING DBMCLI COMMAND!");
if (r_arr[0] == "false") {
var err_msg = "ERROR EXECUTING SQL QUERY: ";
for (var i_cnt = 1; i_cnt < r_arr.length; i_cnt++) {
err_msg = err_msg + r_arr[i_cnt];
ASSERT(arguments.callee, false, err_msg);
} else {
end_l = new RegExp("END");
for (i_cnt = 0; i_cnt < r_arr.length; i_cnt++) {
if (end_l.test(r_arr[i_cnt])) {
ret_s = r_arr[i_cnt + 1];
break;
return ret_s;
ERROR EXECUTING SQL QUERY: OKERR-24988,ERR_SQL: sql error-5015,Missing keyword:USERGROUP,TIMEOUT,STANDARD,RESOURCE,REPLICATION,NOT,LIKE,EXCLUSIVE,DBA,COSTWARNING,COSTLIMIT,CACHELIMIT
How do i get over this problem ?
Thanks
Ravi

Hello Ravi,
this problem probably occurred when a SQL user was trying to be created using a password with special characters, but failed.
Could you please copy the last couple of lines of the protocol named 'XCMDOUT.log' into this thread?
Regards,
Roland

I18n related info for SAP WebAs

Hi All,
I am using SAP Web AS J2EE engine on all the supported platforms. Now, i am planning to provide i18n support in my SAP plugin but not sure how well SAP J2EE engine handles the internationalization. Here are few of my concerns:
1. How to configure SAP WebAs to display log messages in Japanese/other languages? Do i have some configuration in Visual Administrator or in some other SAP tool?
2. How to add users to SAP WebAs User Directory with usernames containing Japanese/other characters? is it supported in SAP Web AS?
Any quick help on this is highly appreciated.
Regards

Hi All,
I am using SAP Web AS J2EE engine on all the supported platforms. Now, i am planning to provide i18n support in my SAP plugin but not sure how well SAP J2EE engine handles the internationalization. Here are few of my concerns:
1. How to configure SAP WebAs to display log messages in Japanese/other languages? Do i have some configuration in Visual Administrator or in some other SAP tool?
2. How to add users to SAP WebAs User Directory with usernames containing Japanese/other characters? is it supported in SAP Web AS?
Any quick help on this is highly appreciated.
Regards

SAP Web Dispatcher does not start as windows service

Hi,
I have successfully installed and configured SAP Web Dispatcher. When I start the web dispatcher from command prompt, it works fine. I created a windows service for web dispatcher using the command
ntscmgr install sapwebdisp -b "c:\program files\sap\sapwebdisp\sapwebdisp.exe"
-p "service pf=sapwebdisp.pfl -cleanup -auto_restart"
The command successfully created sapwebdisp service. The service also starts fine, but web dispatcher does not get started.
Any ideas experts?

Hi,
Ok. Few suggestions.
1. Can you review the SAP note:
552286 Troubleshooting for the SAP Web Dispatcher
2. When you said: "web dispatcher does not get started ", what error you got ? Can you be more details here ?
3. Please check the trace file dev_webdisp" that generated in the work directory. If the log entries is not abvious, increase the trace level to 2 or 3, and reproduce and re-check the trace file.
4. What is the output of the command "sapwebdisp -v"
5. How about sapwebdisp.pfl ? Are those settings correct ?
Hope this helps.
Regards,
Vincent

Doubt regarding SAP WebAs

hi frds,
 1) what is the use of WebAs?
 2) All SAP Components can run in SAP WebAs?
 3) SAP System means SAP WebAS ?
 4) XI Components like IR,IDand SLD..etc reside on SAP WebAS...like this other SAP Netweaver Components like EP Components also reside in 2 stacks of SAP WebAS?
 5)How the XI Message flows from sender Business system to Receiver Business system via WebAS ? plz give example?
 6) What is Difference between SAP System and SAP WebAS and 3rd Party Systems?

hi Murali
1) WAS : SAP Web Application Server is a scalable and reliable component platform. It supports the development and operation of J2EE-based and ABAP-based Web applications and Web services. SAP Web Application Server embraces native Web technologies while providing all the benefits of what has previously been referred to as SAP Basis including the benefits of the proven and scalable data, system, and software lifecycle management capabilities that SAP is known for.
2) The new release of SAP Web Application Server offers full compliance with J2EE 1.3 standard. A completely revamped load-balancing technique highly improves the scalability of the server. Internal persistent information that the system needs to access is now stored in a conventional relational database increasing the robustness and the reliability of the server.
3) SAP System not means SAP WebAS but other parts are also involved
4) yes XI Components like IR,IDand SLD..etc reside on SAP WebAS
5)To know about flow you go through a scenario from TBIT
TBIT40:
https://websmp109.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT40
6) What is Difference between SAP System and SAP WebAS and 3rd Party Systems?
SAP Web Application Server adds business value because it
● Allows customers
● to run any 3rd party J2EE 1.3 compliant application
● to develop and run their own J2EE 1.3 compliant applications
● to easily extend SAP solutions on the basis of ABAP and J2EE technology
● Offers an highly improved load-balancing which results in much better performance and, even more important provides much better scalability
so third party business system is party's own system which is being integrated by SAP XI
for more details on WAS kindly follow this link
http://help.sap.com/saphelp_nw04/helpdata/en/92/7e63423dbc0e53e10000000a155106/frameset.htm
Thanks
sandeep
PS; if helpful reward points

Error in SAP Web AS Connection Test

Connection Test for Connectors is successful
But
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the server to see if it is alive.
7. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
8. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (semdev.suzlon.com:8000)
5. The host name semdev.suzlon.com was resolved successfully.
6. The server semdev.suzlon.com could not be pinged successfully.
What culd be the pblm ?

Hi PK,
in R/3 go to SE37 and check the FM RSBB_URL_PREFIX_GET it will show the details for WAS, I believe the details you gave for WAS are fine.
Now for the issue go to T.Code SICF navigate to the webas path and activate the ping service. This will resolve the issue.
Hope This helps.
Cheers-
Pramod
Reward points if Helpful.

How to connect SAP R/3- System with SAP NetWeaver Portal (2004s)?

Hello to all,
sorry, can someone help me? How can I connect SAP R/3- System with SAP NetWeaver Portal (2004s)?
Thanks and regards,
Galyna

Hi,
In previous link contain this info
This describes how to connect an SAP R/3 system to SAP NetWeaver Portal using an iView
1)      Go to System Administration
2)      Go to System Configuration
3)      Go to Portal Content (Right Side Panel), open that folder.
4)      Right Click on Portal Content, a Panel is displayed select "System (from Template)".
5)      That will display a new view on right side, now select "SAP system using dedicated application server" from
the existing templates. (Other templates are possible - for example, load balanced or through a SAProuter connection string).
For this exercise, we'll use the simplest type.
6)      Choose next
7)      Give the System Name and System Id (which are mandatory fields) incase you want to give any brief notes
about the system then give them in the "Description" field.
8)      Open the Newly Created System.
9)      Now when you want to create a New System, you have to fill four Properties they are:
"Connector" - contains basic connectivty details
"Internet transaction Server (ITS) - if you wish to use SAPGUI for HTML and/or IACs",
"Web Application Server" - if you wish to access BSPs and/or Web Dynpro for ABAP and
"User Management".
You also need at least one "System Alias" has to be defined from the Display drop down menu.
Make sure you have set end user access in the Permissions drop down menu to all users who need to access the system
10) Select "Connector" property, now fill the required fields such as:
a)      Application Host (should be fully qualified hostname) - Give the R/3 "Application Name",
which can be obtained from the SAP Logon Pad (check what R/3 system you are using, right click on it , go to the properties,
it will open a window which has the Application Server Name.
b)      Logical System Name - Give the logical name as defined in the backend system
c)      SAP Client - Check the Client in the backend system and give the appropriate number (3 digits)
d)      SAP System ID(SID)* - Check the R/3 properties and give the check for System ID
e)      System Type* - Since we are connecting to R/3, select SAP_R3 system.
f)       System Number - This is a two digit number that you can find in the SAP Logon Pad
11) Select "Internet transaction Server (ITS)" property, now fill the required fields like
a)      ITS Description à Give some Description
b)      ITS Host Name - Same as "Application Host" of R/3 (when integrated ITS) and should be attached with the
port number of ITS Server (to get port number detailed description is given below). ex: hostname : port number
c)      ITS Path - To get the path along with the port number you have to Log on to R/3 system. Use the
Transaction Code "SICF", it opens a new window go to:
      default_host -> sap -> bc -> gui -> sap -> its -> webgui -> SAP GUI for HTML -> right click on
that and click "Test Service'. This will open a new window, on the address bar you will find the "port number", and
the path something like (/sap/bc/gui/sap/its/webgui). Use the path after the port number.
d)      ITS Protocol - There are two protocols "http" & "https", select the appropriate protocol which is
visible when you opened "Test Service" window.
12) Select "Web Application Server" property , now fill the required fields like
a)      Web AS Description -> Give some Description
b)      Web AS Host Name - same as ITS Host Name
c)      Web AS Path - usually /sap/bc/bsp/sapd)*
Web AS Protocol - should be same as the ITS Protocol.
13)   Select "User Management" property, now fill the required fields like
a)      Authentication Ticket Type - Since we are not using SSO leave the field
empty i.e. put in select mode. (Please note that longer term you will probably want to use SSO)
b)      Logon Method - Select UIDPW.
c)      User Mapping Type - In case you have administration rights then you choose "admin" or in case you
just have user rights then choose "user", better go for "admin/user".
14)   Since all the required fields are filled appropriately now create a System Alias name, this can be done by following steps:
a) go to Display -> Select "System Aliases" give some Alias Name, let's call it "SAP_R/3"
15) Now that System is created we have to create a iView which will display the given Transaction Code.
16) Go To "Content Administration".
17) Go To "Portal Content".
18) Go to Portal Content (Right Side Panel), open that folder
19) Right Click on Portal Content, a Panel is displayed select "New" -> iView
20) Select iView template, click next
21) Select "SAP Transaction iView" from the list of templates available. Click next.
22) Give the iView name and iView ID. Incase you want to give any brief notes about the iView then give it in "Description" field. Click next
23)   Select "SAP GUI for HTML" radio button. Click next
24) Now select the system which you have create "SAP_R/3", give some Transaction Code, say SE12 (Dictionary Display). Click next and Finish.
25) Now Preview the iView
26) You will see a new Window where in SE12 Dictionary Display window is displayed.
Regards,
Senthil K.

HTTPs connection from SAP WebAS

Hello,
I have to establish a connection from SAP WebAS to an iSaSiLk server via HTTPS.
The iSaSiLk authentication is based on client certificates.
I've created a SSL client PSE, generated the Certificate Request, imported the certificate response and the chain of certificates associated with no errors. When testing the connection we're getting the following error message:
SAP icm log:
[Thr 1087400256] ->> SapSSLSessionInit(&sssl_hdl=0x2aaaba679980, role=1 (CLIENT), auth_type=3 (USE_CLIENT_CERT))
[Thr 1087400256] <<- SapSSLSessionInit()==SAP_O_K
[Thr 1087400256] in: args = "role=1 (CLIENT), auth_type=3 (USE_CLIENT_CERT)"
[Thr 1087400256] out: sssl_hdl = 0x1a3310c0
[Thr 1087400256] ->> SapSSLSetNiHdl(sssl_hdl=0x1a3310c0, ni_hdl=22)
[Thr 1087400256] NiIBlockMode: set blockmode for hdl 22 TRUE
[Thr 1087400256] <<- SapSSLSetNiHdl(sssl_hdl=0x1a3310c0, ni_hdl=22)==SAP_O_K
[Thr 1087400256] ->> SapSSLSetSessionCredential(sssl_hdl=0x1a3310c0, &cred_name=0x1a49e4e0)
[Thr 1087400256] SapISSLComposeFilename(): Filename = "/usr/sap/XID/DVEBMGS00/sec/SAPSSLSPHTID.pse"
[Thr 1087400256] <<- SapSSLSetSessionCredential(sssl_hdl=0x1a3310c0)==SAP_O_K
[Thr 1087400256] in: cred_name = "/usr/sap/XID/DVEBMGS00/sec/SAPSSLSPHTID.pse"
[Thr 1087400256] ->> SapSSLSetTargetHostname(sssl_hdl=0x1a3310c0, &hostname=0x1a4a09e0)
[Thr 1087400256] <<- SapSSLSetTargetHostname(sssl_hdl=0x1a3310c0)==SAP_O_K
[Thr 1087400256] in: hostname = "<remoteServer_to_be_accessed>"
[Thr 1087400256] ->> SapSSLSessionStart(sssl_hdl=0x1a3310c0)
[Thr 1087400256] SapISSLUseSessionCache(): Creating NEW session (0 cached)
[Thr 1087400256] Tue Jan 13 10:10:22 2009
*[Thr 1087400256] *** ERROR during SecudeSSL_SessionStart() from SSL_connect()==SSL_ERROR_SSL*
[Thr 1087400256] session uses PSE file "/usr/sap/XID/DVEBMGS00/sec/SAPSSLSPHTID.pse"
[Thr 1087400256] SecudeSSL_SessionStart: SSL_connect() failed
secude_error 536871693 (0x2000030d) = "none of the PSEs registered with hSsl can suffice the negotiated SSL cipher suite"
[Thr 1087400256] >> Begin of Secude-SSL Errorstack >>
[Thr 1087400256] ERROR in ssl3_get_certificate_request: (536871693/0x2000030d) none of the PSEs registered with hSsl can suffice
[Thr 1087400256] << End of Secude-SSL Errorstack
[Thr 1087400256] SSL_get_state() returned 0x00002150 "SSLv3 read server certificate request A"
[Thr 1087400256] No certificate request received from Server
[Thr 1087400256] <<- ERROR: SapSSLSessionStart(sssl_hdl=0x1a3310c0)==SSSLERR_SSL_CONNECT
[Thr 1087400256] ->> SapSSLErrorName(rc=-57)
[Thr 1087400256] <<- SapSSLErrorName()==SSSLERR_SSL_CONNECT
[Thr 1087400256] *** ERROR => IcmConnInitClientSSL: SapSSLSessionStart failed (-57): SSSLERR_SSL_CONNECT [icxxconn_mt
On the iSaSiLk server we're getting:
ssl_debug(2): Starting handshake (iSaSiLk 3.06)...
ssl_debug(2): Received v3 client_hello handshake message.
ssl_debug(2): Client requested SSL version 3.0, selecting version 3.0.
ssl_debug(2): Creating new session 11:5F:04:C9:0D:32:15:B9...
ssl_debug(2): CipherSuites supported by the client:
ssl_debug(2): SSL_RSA_WITH_RC4_128_SHA
ssl_debug(2): SSL_RSA_WITH_RC4_128_MD5
ssl_debug(2): SSL_RSA_WITH_3DES_EDE_CBC_SHA
ssl_debug(2): SSL_RSA_WITH_DES_CBC_SHA
ssl_debug(2): SSL_RSA_EXPORT_WITH_DES40_CBC_SHA
ssl_debug(2): SSL_RSA_EXPORT_WITH_RC2_CBC_40_MD5
ssl_debug(2): SSL_RSA_EXPORT_WITH_RC4_40_MD5
ssl_debug(2): CompressionMethods supported by the client:
ssl_debug(2): NULL
ssl_debug(2): Sending server_hello handshake message.
ssl_debug(2): Selecting CipherSuite: SSL_RSA_WITH_RC4_128_SHA
ssl_debug(2): Selecting CompressionMethod: NULL
ssl_debug(2): Sending certificate handshake message with server certificate...
ssl_debug(2): Sending certificate_request handshake message...
ssl_debug(2): Sending server_hello_done handshake message...
ssl_debug(2): IOException while handshaking: Connection closed by remote host.
ssl_debug(2): Sending alert: Alert Fatal: handshake failure
ssl_debug(2): Shutting down SSL layer...
ssl_debug(2): Closing transport...
From the iSaSiLk everything seems to be OK, but on the SAP WebAS the error "none of the PSEs registered with hSsl can suffice the negotiated SSL cipher suite" is really unclear, since the cipher chosen by the iSaSiLk is one of the ciphers sent by SAP WebAS...
Can anyone give me any suggestion?

Hello Olivier,
Thanks for your answer.
I've implemented note 800240 which facilitates the PSE analysis by implementing the report ZSSF_TEST_PSE. With this report I'm able to check all the PSE content, which are:
Filename SAPSSLSPHTID.pse
PIN <no>
Signature X
Encryption X
Profile Parameter
DIR_INSTANCE /usr/sap/XID/DVEBMGS00 /usr/sap/XID/D00
sec/dsakeylengthdefault 1024
sec/libsapsecu /usr/sap/XID/SYS/exe/run/libsapcrypto.so
sec/rsakeylengthdefault 1024
ssf/name SAPSECULIB
ssf/ssf_md_alg SHA1
ssf/ssf_symencr_alg DES-CBC
ssf/ssfapi_lib /usr/sap/XID/SYS/exe/run/libsapcrypto.so
ssf2/name
ssf2/ssf_md_alg SHA1
ssf2/ssf_symencr_alg DES-CBC
ssf2/ssfapi_lib
ssf3/name
ssf3/ssf_md_alg SHA1
ssf3/ssf_symencr_alg DES-CBC
ssf3/ssfapi_lib
Environment variables
USER xidadm
SECUDIR /usr/sap/XID/DVEBMGS00/sec
PSE
Validity 18.12.2008 19:47:04 18.12.2009 19:47:04
Algorithm RSA (OID 1.2.840.113549.1.1.1)
Test signature
Signature OK
Verification OK
Test encryption
Encryption OK
Decryption OK
As you can see, the cipher algorithm used is RSA. Any suggestion... ?
An iSaSiLk server "is a Java programming language implementation of the SSLv2 (client-side), SSLv3, TLS 1.0 and TLS 1.1 protocols. It supports all defined cipher suites (except for Fortezza), including all AES and PSK cipher suites. iSaSiLk implements all standard TLS extensions, comes with an easy to use API and operates on top of the IAIK-JCE Javau2122 Cryptography Extension. iSaSiLk is highly configurable and will work with any alternative JCE implementation supported by a proper provider for supplying the required cryptographic algorithms".
Once again thanks for your answer.

DB Connect, BW on MSSQL, Oracle as external system(NON SAP)

Hi,
Requirement:
I want to connect and Extract data from Oracle database (non-sap).
BI System Details:
1. BI 7.0 (EHP 1) server is running on MSSQL 2005.
2. I have WEB AS as ABAP only.
3. Operating system Win 2003 server.
Oracle Database (NON SAP) Details:
1. OS : Win 2003
2. Oracle 10g Release 2
Activity:
1. I have downloaded, unpacked and copied the Database Shared Library (DBSL) as mentioned on sap help link http://help.sap.com/saphelp_nw04s/helpdata/en/42/fdccb72aa95277e10000000a1553f7/frameset.htm
2. I have installed the oracle 8i client on BW server and configured the tnsnames.ora file. I am able to ping(tnsping sap.world) the oracle database through command prompt(cmd).
3. RSA1 -> Source system -> DB Connect.
4. Right Click on DB Connect -> Create.
5. Entered following entries in screen: Create Source System
Logical System Name : Oracon
Source System Name : Oracle Connection
6. Click on Enter icon.
7. I make the following entries in the screen "Description Of Database Connections"
DB Connection : Oracon
DBMS : ORA
User Name : username of oracle database with admin right
DB password : database password
Conn. info : sap.world
Permanent : unticked
Connection Limit: empty
Optimum Conns : empty
8. Click on SAVE Button
9. Click on Back Button and again click on Back Button
10. Now i got the Dialog box "Cannot Access Source System ORACON" with three button.
System Log
Correct
Cancel
11. I clicked on System Log and checked the log.
12. I am getting the following error
No shared library found for the database with ID ORACON
Documentation for system log message BY G :
As well as the standard connection, an attempt was made to set up
another database connection, under the specified ID. The Shared Library
for this second database could not be found.
The Shared Library is usually found in the Executable
directory (profile parameter DIR_LIBRARY) under the name dbs
<dbs>slib<os_ext>. <dbs> stands for the database type and <os_ext>
stands for the operating system-specific extension of the Shared
Libraries.
The database type is determined from the entry that corresponds to the
specified DB ID in the table DBDCON. Check whether the data in this
entry is correct.
Please Help me to rectify the error.
Regards,
Aslam Khan

Hi,
and thanks for the answers.
Now I have the oracle client installed on the BW server, and the dbsoraslib library has been copied to the BW run directory. But any attempt to connect to the system just gives me the error "No shared library found for the database with ID AGRESSO"
(I get ths error no matter what I input when trying to set up the connection, also if I intentionally gives wrong ID and/or IP)
I'm wondering if my input is the problem, and then, what would be correct.
My tnsnames.ora looks like this
AGRESSO =
(DESCRIPTION =
 (ADDRESS_LIST =
 (ADDRESS = (COMMUNITY = tcp.world)(PROTOCOL = TCP)(Host = xxx.xxx.xxx.xxx)(Port = 1521))
 (ADDRESS = (COMMUNITY = tcp.world)(PROTOCOL = TCP)(Host = xxx.xxx.xxx.xxx))(Port = 1521))
 (CONNECT_DATA =
 (SID = db06)
(edited out ip adress)
When creating the connection I give
Logical system name "AGRESSO",
source system name I assume I can give whatever here.
Type and release I leave blank.
Next screen I give:
DB Connection: AGRESSO (Can not be edited)
DBMS: ORA
Username/passord as given by the server admin
Conn. info I have tried many different inputs. AGRESSO, the IP adress, the SID (db06), but no luck.
Anyone have any knowledge about what to give as input? (if the tnsnames.ora is lacking information etc)
Thanks for any input.
Regards,
Øystein

SAP Web AS Connection Problem

Hi Gurus,
I am now facing one problem about creating a system in EP.
My system is Netweaver 04s with AS,EP and BI with SP13. All run in one single server.
I maintained the SAP Web AS, and tested the connection, got the following message:
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the server to see if it is alive.
7. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
8. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (192.168.2.62:50000)
5. The host name 192.168.2.62 was resolved successfully.
6. The server 192.168.2.62 could not be pinged successfully.
Strange that the ping fails, cause all the instances are running in the same server.
"Connection Test for Connectors" works fine for me by using SSO from portal to abap.
Please give the solution.
Thanks & Regards

Hi,
You mean to say you are using IP address to login to portal. Using IP address has caused many problems. I am not sure if this would solve your issue but it is always recommended to use fully qualified domain name as host while accesssing portal. You can check using that too.
Regards,
Harini S

System Configuration - SAP Web AS Connection - connection tests error

Similar Messages

Maybe you are looking for