System copy - BSP applications launching with old host name
Hi
After system copy, when we test any bsp application, a new window is opened in the internet explorer with the old Web server hostname. These bsp applications are not launching with the new server name.
I checked all the ICM settings and they all fine.
Is there any database table which has the old web server entries?
Regards
Chandu
Resolved by ourselves. Deleting the contents in table HTTPURLLOC fixed the issue.
Regards
Chandu
Similar Messages
-
Telneting in to Postfix reports back with old host name
Hi.
I am setting up a home server for my family (4 users) running a late 2010 Mac mini server with OSX Server 3.0.1
I am computer literate but am new to server hosting. I have successfully navigated setting up DNS properlly the way I want it, but am now running into a problem setting up a family mail server.
When I first got the machine I just played around with the server settings under Snow Leopard and turned on some services without really intending to use them as we were all using Google services at the time. I now want to get off those services, such as mail, etc. and host them myself.
Anyway, I've registered a domain and pointed it to my machine, and everything appears to be working properly. I used GoDaddy.com to register the domain.
But after setup of the Mail server, getting my ISPs mail relay server configured, etc. I get the following when I test using telnet to connect to port 25:
server:~ admin$ telnet 127.0.0.1 25
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
220 <oldhostname>.org ESMTP Postfix
421 4.4.2 <oldhostname>.org Error: timeout exceeded
Connection closed by foreign host.
server:~ admin$ sudo changeip -checkhostname
Password:
Primary address = 10.0.1.254
Current HostName = <newhostname>.org
DNS HostName = <newhostname>.org
The names match. There is nothing to change.
dirserv:success = "success"
server:~ admin$ hostname -f
<newhostname>.org
You'll notice I then double checked that my DNS was set up correctly, and then checked the host name again for good measure. However, Postfix is calling my outgoing SMTP by the old and never really used host name still.
I would really appreciate any help you knowledgable people could give me! Is there a library file that needs updating and if so how do I do that? I found a similar problem here but this is on a linux box, which I have no experience with whatsoever, and can't figure out how to do what he did.
Thank you again in advance for any input.Also Getting the following in Console:
04/01/14 18:04:59,806 kdc[62640]: AS-REQ [email protected] from 127.0.0.1:57943 for krbtgt/[email protected]
04/01/14 18:04:59,808 kdc[62640]: UNKNOWN -- [email protected]: no such entry found in hdb
04/01/14 18:05:00,294 servermgrd[20002]: nsc_smb XPC: handle_event error : < Connection invalid >
And my sudo postconf -c /Library/Server/Mail/Config/postfix -n output:
alias_maps = hash:/etc/aliases
always_bcc =
biff = no
command_directory = /usr/sbin
config_directory = /Library/Server/Mail/Config/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
data_directory = /Library/Server/Mail/Data/mta
debug_peer_level = 2
debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin xxgdb $daemon_directory/$process_name $process_id & sleep 5
dovecot_destination_recipient_limit = 1
enable_server_options = yes
header_checks = pcre:/Library/Server/Mail/Config/postfix/custom_header_checks
html_directory = /usr/share/doc/postfix/html
imap_submit_cred_file = /Library/Server/Mail/Config/postfix/submit.cred
inet_interfaces = all
inet_protocols = all
local_recipient_maps = proxy:unix:passwd.byname $alias_maps
mail_owner = _postfix
mailbox_size_limit = 0
mailbox_transport = dovecot
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
message_size_limit = 10485760
mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
mydomain = grabko.org
mydomain_fallback = localhost
myhostname = server.grabko.org
mynetworks = 127.0.0.0/8
newaliases_path = /usr/bin/newaliases
postscreen_dnsbl_sites = zen.spamhaus.org*2
queue_directory = /Library/Server/Mail/Data/spool
readme_directory = /usr/share/doc/postfix
recipient_canonical_maps = hash:/Library/Server/Mail/Config/postfix/system_user_maps
recipient_delimiter = +
relayhost = smtprelay1.telia.com
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = _postdrop
smtp_sasl_auth_enable = no
smtp_sasl_password_maps =
smtpd_client_restrictions = permit_mynetworks permit_sasl_authenticated reject_rbl_client zen.spamhaus.org permit
smtpd_enforce_tls = no
smtpd_helo_required = yes
smtpd_helo_restrictions = reject_invalid_helo_hostname reject_non_fqdn_helo_hostname
smtpd_pw_server_security_options = cram-md5,digest-md5,gssapi
smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks reject_unauth_destination check_policy_service unix:private/policy permit
smtpd_sasl_auth_enable = yes
smtpd_tls_CAfile = /etc/certificates/server.grabko.org.1C04ED269951F447E3422EB93680FCEDAE448203.ch ain.pem
smtpd_tls_cert_file = /etc/certificates/server.grabko.org.1C04ED269951F447E3422EB93680FCEDAE448203.ce rt.pem
smtpd_tls_exclude_ciphers = SSLv2, aNULL, ADH, eNULL
smtpd_tls_key_file = /etc/certificates/server.grabko.org.1C04ED269951F447E3422EB93680FCEDAE448203.ke y.pem
smtpd_use_pw_server = yes
smtpd_use_tls = yes
tls_random_source = dev:/dev/urandom
unknown_local_recipient_reject_code = 550
use_sacl_cache = yes
virtual_alias_domains = $virtual_alias_maps
virtual_alias_maps = $virtual_maps
And my sudo serveradmin fullstatus mail:
mail:startedTime = "2014-01-01 11:58:58 +0000"
mail:setStateVersion = 1
mail:state = "RUNNING"
mail:protocolsArray:_array_index:0:status = "ON"
mail:protocolsArray:_array_index:0:kind = "INCOMING"
mail:protocolsArray:_array_index:0:protocol = "IMAP"
mail:protocolsArray:_array_index:0:state = "RUNNING"
mail:protocolsArray:_array_index:0:service = "MailAccess"
mail:protocolsArray:_array_index:0:error = ""
mail:protocolsArray:_array_index:1:status = "OFF"
mail:protocolsArray:_array_index:1:kind = "INCOMING"
mail:protocolsArray:_array_index:1:protocol = "POP3"
mail:protocolsArray:_array_index:1:state = "RUNNING"
mail:protocolsArray:_array_index:1:service = "MailAccess"
mail:protocolsArray:_array_index:1:error = ""
mail:protocolsArray:_array_index:2:status = "ON"
mail:protocolsArray:_array_index:2:kind = "INCOMING"
mail:protocolsArray:_array_index:2:protocol = "SMTP"
mail:protocolsArray:_array_index:2:state = "RUNNING"
mail:protocolsArray:_array_index:2:service = "MailTransferAgent"
mail:protocolsArray:_array_index:2:error = ""
mail:protocolsArray:_array_index:3:status = "ON"
mail:protocolsArray:_array_index:3:kind = "OUTGOING"
mail:protocolsArray:_array_index:3:protocol = "SMTP"
mail:protocolsArray:_array_index:3:state = "RUNNING"
mail:protocolsArray:_array_index:3:service = "MailTransferAgent"
mail:protocolsArray:_array_index:3:error = ""
mail:protocolsArray:_array_index:4:status = "OFF"
mail:protocolsArray:_array_index:4:kind = "INCOMING"
mail:protocolsArray:_array_index:4:protocol = ""
mail:protocolsArray:_array_index:4:state = "STOPPED"
mail:protocolsArray:_array_index:4:service = "ListServer"
mail:protocolsArray:_array_index:4:error = ""
mail:protocolsArray:_array_index:5:status = "ON"
mail:protocolsArray:_array_index:5:kind = "INCOMING"
mail:protocolsArray:_array_index:5:protocol = ""
mail:protocolsArray:_array_index:5:state = "RUNNING"
mail:protocolsArray:_array_index:5:service = "JunkMailFilter"
mail:protocolsArray:_array_index:5:error = ""
mail:protocolsArray:_array_index:6:status = "ON"
mail:protocolsArray:_array_index:6:kind = "INCOMING"
mail:protocolsArray:_array_index:6:protocol = ""
mail:protocolsArray:_array_index:6:state = "RUNNING"
mail:protocolsArray:_array_index:6:service = "VirusScanner"
mail:protocolsArray:_array_index:6:error = ""
mail:protocolsArray:_array_index:7:status = "ON"
mail:protocolsArray:_array_index:7:kind = "INCOMING"
mail:protocolsArray:_array_index:7:protocol = ""
mail:protocolsArray:_array_index:7:state = "RUNNING"
mail:protocolsArray:_array_index:7:service = "VirusDatabaseUpdater"
mail:protocolsArray:_array_index:7:error = ""
mail:logPaths:Server Error Log = "/Library/Logs/Mail/mail-err.log"
mail:logPaths:IMAP Log = "/Library/Logs/Mail/mail-info.log"
mail:logPaths:Server Log = "/Library/Logs/Mail/mail-info.log"
mail:logPaths:POP Log = "/Library/Logs/Mail/mail-info.log"
mail:logPaths:SMTP Log = "/var/log/mail.log"
mail:logPaths:List Server Log = "/Library/Logs/Mail/listserver.log"
mail:logPaths:Migration Log = "/Library/Logs/MailMigration.log"
mail:logPaths:Virus Log = "/Library/Logs/Mail/clamav.log"
mail:logPaths:Amavisd Log = "/Library/Logs/Mail/amavis.log"
mail:logPaths:Virus DB Log = "/Library/Logs/Mail/freshclam.log"
mail:imapStartedTime = "2014-01-01 11:58:58 +0000"
mail:postfixStartedTime = "2014-01-01 11:59:32 +0000"
mail:servicePortsRestrictionInfo = _empty_array
mail:servicePortsAreRestricted = "NO"
mail:connectionCount = 0
mail:readWriteSettingsVersion = 1
mail:serviceStatus = "ENABLED"
I am only running one zone for the domain, my mind is boggled... -
SAP SQL System Copy backup restore method with ADS(Adobe document services)
Hello all,
i´m preparing a system copy with ERP 6.0 in windows and SQL server with ADS.
I have a doubt, can i do the System Copy backup/restore method with ADS??
or the only method that works is with system export/import in all instances??
Thank youHi Oscar,
Is your ADS system separate from your ERP system, or are they on the same server?
In any case, you can use backup/restore to copy a Java system, but you must also make a system export/import for the Java server components. The two work in conjunction, so that the export tool doesn't export your whole database, only the components maintained in the filesystem. If you select the database detach/attach or backup/restore method in the tool when going against the Java system, it will prompt you at the right point in the process to make your Java export as well.
The caveat is that the Java export requires downtime, so it isn't possible to copy a Java system without impacting system availability, as it is with a pure ABAP system.
Best regards,
Matt -
How to Use Interactive Forms in BSP Applications - trouble with demo
Is anyone else out there having trouble with the subject how to guide? https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0e58022-2a39-2a10-69a8-c1a892e2b3f4
I think I have everything built out correctly but I get the following run time error.
Business Server Page (BSP) error
What happened?
Calling the BSP page was terminated due to an error.
SAP Note
The following error text was processed in the system:
An exception with the type CX_SY_REF_IS_INITIAL occurred, but was neither handled locally, nor declared in a RAISING clause
Exception Class CX_SY_REF_IS_INITIAL
Error Name
Program Z_PROCESS_BOOKING_FORM========CP
Include Z_PROCESS_BOOKING_FORM========CM002
ABAP Class Z_PROCESS_BOOKING_FORM
Method DO_REQUEST
Line 33
Long text An attempt was made to execute a dynamic method callon an initial(NULL-) object reference. The reference must refer to an object.
Following is my code: line 33 reads as strChecked = node->get_value( ).
method DO_REQUEST.
*CALL METHOD SUPER->DO_REQUEST
data: bookingxml type string.
bookingxml = request->get_cdata( ).
data: streamFactory type ref to
if_ixml_stream_factory.
data: iStream type ref to if_ixml_istream.
streamFactory = g_ixml->create_stream_factory( ).
iStream =
streamFactory->create_istream_string(
bookingxml ).
data: document type ref to if_ixml_document.
document = g_ixml->create_document( ).
data: parser type ref to if_ixml_parser.
parser = g_ixml->create_parser( stream_factory =
streamFactory
istream =
iStream
document =
document ).
parser->parse( ).
data: node type ref to if_ixml_node.
data: strChecked type string.
node = document->find_from_name( name = 'RESERVED'
strChecked = node->get_value( ).
data: reserved type BAPISBODAT-RESERVED.
data: checked type i.
move strChecked to checked.
if ( checked = 1 ).
reserved = 'X'.
else.
reserved = ''.
endif.
data: custbook type BAPISBONEW.
node = document->find_from_name( name = 'AIRLINEID'
custbook-airlineid = node->get_value( ).
node = document->find_from_name( name = 'CONNECTID'
custbook-connectid = node->get_value( ).
data: fd type BAPISBONEW-FLIGHTDATE.
data: strFd type string.
node = document->find_from_name( name =
'FLIGHTDATE' ).
strFd = node->get_value( ).
CALL FUNCTION 'CONVERT_DATE_TO_INTERNAL'
EXPORTING
DATE_EXTERNAL = strFd
* ACCEPT_INITIAL_DATE =
IMPORTING
DATE_INTERNAL = custbook-flightdate
EXCEPTIONS
DATE_EXTERNAL_IS_INVALID = 1
OTHERS = 2
IF SY-SUBRC <> 0.
* Do something
ENDIF.
node = document->find_from_name( name =
'CUSTOMERID' ).
custbook-customerid = node->get_value( ).
node = document->find_from_name( name = 'CLASS' ).
custbook-class = node->get_value( ).
node = document->find_from_name( name = 'AGENCYNUM'
custbook-agencynum = node->get_value( ).
node = document->find_from_name( name = 'PASSNAME'
custbook-passname = node->get_value( ).
data: pb type BAPISBONEW-PASSBIRTH.
data: strPb type string.
node = document->find_from_name( name = 'PASSBIRTH'
strPb = node->get_value( ).
CALL FUNCTION 'CONVERT_DATE_TO_INTERNAL'
EXPORTING
DATE_EXTERNAL = strPb
* ACCEPT_INITIAL_DATE =
IMPORTING
DATE_INTERNAL = custbook-passbirth
EXCEPTIONS
DATE_EXTERNAL_IS_INVALID = 1
OTHERS = 2
IF SY-SUBRC <> 0.
* Something
ENDIF.
data: bn type BAPISBOKEY-BOOKINGID.
data: return type bapiret2_tab.
data: errmsg type string.
CALL FUNCTION 'BAPI_FLBOOKING_CREATEFROMDATA'
EXPORTING
RESERVE_ONLY = reserved
BOOKING_DATA = custbook
* TEST_RUN = ' '
IMPORTING
* AIRLINEID =
BOOKINGNUMBER = bn
* TICKET_PRICE =
TABLES
* EXTENSION_IN =
RETURN = return.
data: wa type bapiret2.
loop at return into wa.
if wa-type = 'E'.
move wa-message to errmsg.
response->append_cdata( errmsg ).
response->append_cdata( '<BR>' ).
endif.
endloop.
response->append_cdata( 'Flight booked, booking reference number: ').
data: strBn type string.
move bn to strBn.
response->append_cdata( strBn ).
endmethod.
The first page works fine but when I submit my form it fails. I debugged and the request object doesn't look right.
Any ideas would be greatly appreciated.
Regards,
Dan
Message was edited by:
Dan Scheck
Message was edited by:
Dan ScheckHi Surija,
there is an issue with Internet Explorer that causes this problem when you launch the BSP applicaiton using the test menu in SE80. The issue does not occur with Firefox...very strange I know.
Anyway, to get around this you just copy the BSP application URL and open a browser and paste the URL in...so essentially do not use the "Test" in SE80 to launch your application.
Hope this fixes your problem!
Cheers,
Jeff -
System debugging BSP application
Experts,
I set system debugging for my BSP application going thru SICF. I have external breakpoint set at do_init method of my controller class. If I execute the BSP from portal, it doesn't stop at the breakpoint in my controller class. Any help is appreciated.Hi,
In the development workbench (Transaction SE80).
Choose Utilities -> Settings. On the following dialog box for the user-specific settings, on the tab ABAP Editor choose the embedded tabstrip HTTP Debugging and activate HTTP debugging globally for your user.
In the Web Application Builder of the development workbench, you can also activate or deactivate HTTP debugging:
Choose Utilities -> Breakpoints ®(De)activate for HTTP user.
Ensure that deleting all breakpoints does not automatically deactivate HTTP debugging.
Regards,
Azaz. -
I have a user name on my computer that was tied in with the domain name of the server at my workplace. I would access Firefox under this user name. I have now changed jobs, and for good and obvious reasons can no longer utilize my previous company associated username.
I have set up a new username on the same computer. When I access Firefox, all of my old bookmarks are gone, because Firefox does not recognize me under the new username as the same person. In the meantime, I have established new bookmarks under the new username.
I have copied my profile from Firefox under my old username. Can I have two profiles under my new username and pick which one I want to use at that time when accessing Firefox?
I am running Windows 7 Professional, with 4 gig ram, Intel i3 CPU, 2.13 GHz, 64 bit operating system, Firefox 7.0.1
Thank youYou can not merge accounts.
Apps are tied to the Apple ID used to download them, you can not transfer them. -
How connect 10g with discoverer (host name give me error)
hi master
sir i install discoverer but not connect with oracle 10g
i flow this step
1. From the Start button use Programs | Oracle - BIToolsHome1 | Configuration and Migration Tools | Net Configuration Assistant.
2. Select Local Net Service Name Configuration the click the Next button
3. Check Add then click the Next button
4. Type the Service Name of the database you want to connect to, then click the Next button
5. On the next screen, select TCP and click the Next button
6. On the next screen, enter the full name for the Host name using a fully qualified domain name and then tell the system which Port the database is using. Click the Next button
7. If you know a username and password on the database select Yes, perform a test and then click the Next button. While this is not a mandatory step it is well worth doing as it will show whether you can connect to the database.
8. On the next screen, the test will either succeed or fail. If it says Invalid username / password click the Change Login button and enter a known username / password combination
9. When informed Connecting... Test successful click the Next button
10. Provide a name that you want to know this connection by then click the Next button
11. When asked if you would like to configure another service name, select No and click the Next button
12. Click the Next button again
13. Click the Finish button
but Host name or step 6 give me error
this is my database name == universi
this is my computer name == fahim
this is my system user password == mfa786
how i configure my discoverer with oracle 10g
please give me idea
thank's
aamirthank's for your reply
sir try to configure but host name step not success
and i try to test
then taht window give me this error
see errir
Connecting...ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
The test did not succeed.
Some of the information you provided may be incorrect.
Click Back to review the information provided for net service name, or Change Login to change username.
============== this is my bi path
C:\oracle\BIToolsHome_6\network\ADMIN
this is my tnsnames.ora file
# tnsnames.ora Network Configuration File: C:\oracle\BIToolsHome_6\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
UNIVERSI =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = fahim)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = universi)
================ this is my listener.ora file
# listener.ora Network Configuration File: C:\oracle\BIToolsHome_6\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\BIToolsHome_6)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = fahim.iqra.edu.pk)(PORT = 1521))
when i try to run my discoverer that give me this error
unable to connect fahim@universi
failed to connect to databae - ORA-12514: TNS: listeer dose not currently know of service requested in connect descriptor
please give me idea how i connect my oracle 10g with discoverer
thank's
aamir -
Bridge copy and paste folders with the same name question
I just copied and pasted a folder named, as an example, "concerts" with a bunch of pictures to another drive with a folder with the same name.
I choosed "substitute" when prompted and all the pics existing in old "concerts" folder have been deleted and replaced with just the new ones.
So pasting a folder can't add files to the folder with the same name, but it completely replaces it. The other prompted option creates a "concerts (1)" new folder.
Luckyly before moving files I always do a backup, so it's not a big issue, but I'm amazed by such behaviour. Also deleted pictures don't appear in the recycle bin. They are completely lost!I choosed "substitute" when prompted and all the pics existing in old "concerts" folder have been deleted and replaced with just the new ones.
Are you on Windows? don't know the options you tell, I have three options (Mac) called: 'cancel', 'replace' and 'auto resolve' when dealing with one file and for multiple files it adds 'skip' to the list and has the option for 'apply all'
Replace does what it says, it replaces files and folders with the same name, auto resolve adds a (1) to the files or other number if more with same name are added.
So pasting a folder can't add files to the folder with the same name, but it completely replaces it. The other prompted option creates a "concerts (1)" new folder.
This is normal and wished behavior, you get a warning if names are the same and a choice to either overwrite them or add them with a new (different) filename.
Luckyly before moving files I always do a backup, so it's not a big issue, but I'm amazed by such behaviour. Also deleted pictures don't appear in the recycle bin. Completely lost!
Heard that before but can't replicate this, they always appear in the trash on my Mac. -
How to create a new database after copying an existing database with a new name
hi
i have an existing database and want to copy with a new name in sql server 2005 how do it is possible
spose
i have a db name attached in sql server StoreManagementDB now i want to copy this database with all the transactions as StoreManagementDB_1.
thanksUse a two steps to use a backup file to restore a database with a new name.
----You need to have a full backup of your database:
--Step 1:
RESTORE FILELISTONLY
FROM DISK = 'C:\bk\TEST.BAK'
--Find out the LogicalName of data file and log file
-- in this case: the data file: TEST and the log file LogicalName: TEST_log
--Both names will be used in the MOVE command
--Step 2:
-- Restore the files for test1.
RESTORE DATABASE test1
FROM DISK = 'C:\bk\TEST.BAK'
WITH RECOVERY,
MOVE 'TEST' TO 'C:\bk\test1_Data.mdf',
MOVE 'TEST_log' TO 'C:\bk\test1_Log.ldf'
GO -
After building my application in VS2012 Update 4 ,application started crashing with the below mentioned problem signature.
Problem signature:
Problem Event Name: BEX64
Application Name: App.exe
Application Version: 1.0.0.1
Application Timestamp: 52fdbd9d
Fault Module Name: MSVCR110.dll
Fault Module Version: 11.0.51106.1
Fault Module Timestamp: 5098826e
Exception Offset: 000000000006d4f9
Exception Code: c0000417
Exception Data: 0000000000000000
OS Version: 6.1.7601.2.1.0.274.10
Locale ID: 1033
Additional Information 1: 1032
Additional Information 2: 103247eabca85d12954263c679d66e19
Additional Information 3: 7fa2
Additional Information 4: 7fa2470b0fea6279055c0db583abca71
Any help is appreciated.Hi,
To debug this kind of issue, we recommend you to post in MSDN forum because they are more familiar with developing and debugging app:
http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?category=visualstudio
If you have any feedback on our support, please click
here
Alex Zhao
TechNet Community Support -
Hi,
While accessing the portal with a domain name with one dot like .com
or .net, it gives javasctipt error in the login page and the subsequent
page after login. User is not able to browse anything in the portal
after this.
But when the domain name has more than 1 dot like .ngn.com or .ngn.net
or .ngn.fomsa.com, it works abosolutely fine.
Going forward for production, our portal url is http://ngnportal.com
which has domain with one dot. Please suggest the solution for this.
Environment Details are as below-
Operating System:- Solaris 5.9
Database :- Oracle 9.2.0.6
Portal:- EP6.0 SP9
Please let me know for any further clarifications.
Regards,
ChandraHi,
I was going to say that you should use fully qualified domain names. However, I guess you are, you just don't have a very long domain name!
This is probably a bug. You are currently only on SP9, SP16 is now out, so that would probably fix it (just don't use SP13 - it was crap!!).
If that doesn't fix it another possiblity would be to have ngnportal.com redirect to ngnportal.xxx.com just using a standard DNS redirecto or website redirect. A bit of a workaround I know, but it should work.
If patching the portal does not work - raise an OSS message, it is what you pay your licence fee for.
Paul -
Deploying a copy of existing database with a different name on the same server
I am a developer(an inexperienced one) trying to understand what is the best way to deploy a brand new database with
the exact same schema as an existing DB on the same server, but with a different name. I want to preserve the data in all reference tables which I can do by having the relevant post-deployment scripts run after the deployment.
What I can't understand is how the project should be set up to deploy database Customer_2 if database Customer_1 exists on
this server - the Visual Studio project contains DB Customer and I need to find a way to be able to deploy Customer_N (but without creating N identical DB's in the project). I checked a ton of articles and blogs, and feel dumb asking this question but haven't
been able to understand it yet. Any help would be appreciated.Hello,
Maybe the TargetDatabase and the DeployToDatabase properties can help you.
http://www.asp.net/web-forms/tutorials/deployment/web-deployment-in-the-enterprise/deploying-database-projects
You can deploy multiples databases from one project if you want, as explained on the following
post:
http://stackoverflow.com/questions/1544966/gdr-deploying-multiple-database-targets-with-one-project
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Need to copy my application settings from old profile to a new one
Using Tiger
Greetings,
Somewhere in my last 15 months of computer usage I have somehow tweaked OS X in such a way that my mouse pointer doesn't let me click multiple times in one particular spot. I have no idea where to look to fix something like this, but just out of curiosity I created a new user profile to see if the same problem would occur. It didn't.
So, in order to get rid of the problem, I thought I would just transfer my key application settings (Thunderbird email, Firefox, and other key apps) into a new profile that did not have this pointer clicking problem on it.
Is there an application that will automate this process? I would need to have the ability to move all the user data from only the apps I want, so that I don't "copy" the settings that are causing my system to give me these pointer problems.
Thanks for any help you can offer...Carolyn Samit wrote:
One way to select multiple files/folders, et., is to hold down the *Shift key* while selecting with your Mouse.
Carolyn
Hi Carolyn,
I think "shift" only works with contiguous files while command = Apple" will allow one to click on arbitrary files. I know it works that way in "Mail."
Regards, JP. -
Have tried to get Apple Tech Support and local Apple techs to deal with this problem to no avail. Apple store "genius" throws up hands and says nothing can be done. Root of the problem seems to be that the old non-email AppleID is stuck in their system creating a catch22 that it appears as the account purchasing Apps, then is not recognized as a valid ID, and then disallows any attempt to change it to a recognized email address.
Consequence is that Apps appropriately purchased can not be updated. Apple store advises us to delete them and repurchase, but this seems more Windowsian than Applian. Any Ideas??Hello J_DougBC,
Thank you for posting in the Apple Support Communities. I found an article that addresses Apple IDs that are different than the Primary Email Address on the account. You will need to go to https://appleid.apple.com/ to "Make your Apple ID and email address one and the same."
If your Apple ID and primary email address do not match, or they match but the email address is unverified, you can edit them.
1. Sign in to My Apple ID to manage your account information.
2. If you want to add and verify an email address that matches your Apple ID, follow the dialog box that says "Make your Apple ID and email address one and the same." This will automatically unverify that email address from any other Apple ID for which it was previously verified.
3. If you want to change your email address to one that does not match your Apple ID, click Edit next to your Primary Email Address. If this email address is already associated with another Apple ID, you will need to sign in with that Apple ID and delete it before you can add it to your preferred Apple ID.
Note: If you have an @me.com or @mac.com Apple ID and primary email address, you cannot edit your primary email address once it has been verified. To change your @me.com or @mac.com primary email address to another email address, contact Apple Support for assistance.
You can find the full article here:
Associating and verifying email addresses with your Apple ID
http://support.apple.com/kb/HE68
I hope this helps get you back on track!
Best,
Sheila M. -
PDF files keep coming with old file name not as current file name
Hi,
I have a problem when exporting InDesign docs to PDF with some documnets. If I change the name in the export dialog box, then every time I export this doc to PDF in the future this name keep coming, even when I change the name of the document or save it in a new name. This causes confusion, since sometimes the name is completely different from the InDesign file name. What can be done to tell InDesign to save the exported PDF file according to the current file name and don’t remember the old PDF file name?
I was thinking of a script, is there a ready one to use?
ThanksThanks for the tips, very useful indeed.
Though it is bit hard to have everyone in the studio follow them as a routine. I way I used to do this is to go to Save as command, with right mouse I choose copy the highlighted document name, then I choose cancel, then when I choose to export I'll paste the the name which is the current file name, this is good for me, but I wouldn't dream of having this as a routine for everyone in the studio.
I was thinking it would be easy if I can find a script, since I don't know scripting, to do just that, i.e. have Indesign to copy the current filename of the document (whether by doing the same trick as I am doing or if there is a direct command to do that in the script), then the script will go to the export dialog box, paste that name, then I will go on with the normal export dialog box options.
This script will be easier to have everybody in the studio to follow.
Appreciate your help.
Thanks
Maybe you are looking for
-
Is Flash 8 practical for me?
I'm a Flash 8 newbie. This is my first day using using the program. I have a photography website. I would like to make photo galleries that have thumbnails to click on to view the larger image. I'll need to post between 25 to 40 photos per gallery, a
-
Can I use a 1 3T base station Time Capsule as a router/backup and a second 3T base station as a Time Machine backup router without conflict?
-
Please show me some examples for using the carray type fields in FML buffer
How to use Fget and Fchg to access and modify the carray type fields in FML buffer? please show me some examples? Thanks!
-
Error from appleSyncNotifier.exe : ista pc . how can i solve this problem?
cannot find procedure xmlTextreaderConst in DDL-bestand libxml2.dll . get this always after i start up mu windows vista pc . how can i solve this problem?
-
Double casting (code example from Struts)
I saw a line when I was looking at a Struts example: String username = ((LogonForm) form).getUsername();This was the first time I saw double casting. I couldnt understand what was happening here. I think the programmer wrote it this way to compact th