System Copy guide for 4.7x200 on Unix with oracle

Hi All,
Where can i get system copy guide for 4.7x200 on unix with oracle?
I searched it in Market place but could not get it.
Thanks in advance.
Chaitanya

Check
https://service.sap.com/nw04installation
--> Open "SAP Web AS"
--> SAP Web AS 6.40 SR1 and Related Documentation
--> Homogeneous and Heterogeneous System Copy
Markus

Similar Messages

System copy guide for Solution Manager 7.0 SPS15

Hello,
a new hardware is needed for our SAP Solution Manager 7.0 SPS 15. I will install a new SAP Solution Manager and do a system copy from the old hardware to the new one. There is no migration neccessary, because OS and DB will be the same.
Now I'm searching for some informations and guides to do a system copy of a SAP Solution Manager. All I found was a system copy guide of Netweaver 04s SR3/SR2 with informations about Java Usage Types but not for Diagnostics.
Are there any guides or howtos to do a system copy with SAP Solution Manager ABAP+JAVA? Does anyone have experiences and advices?
Kind regards,
Sascha Piotrowsky

> Looking forwards to this event I'm afraid of forgetting some dependencies or configurations which have to be changed also, like SMD-Agents configuration,s trusted connections, wiley introscope, e2e and so on.
Wily is not part of the copy - you will need to copy this "manually". The connections et al must be re-done...
Markus

System Copy Guide for ECC 6.0 ABAP stack

Dear All,
I'm unable to find system copy guide for ECC 6.0, there are lots of guides present for NW Systems on the SMP, couldn't find any thing for ECC6.0 ABAP Stack.
Could anybody please forward me the link.
Thanks in advance!

Hi,
Pls refer below link.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/801eba00-ec8a-2a10-eca6-c7f38bdd4d19
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/207ac87d-e28a-2a10-9caa-ac5d69dc9302
Regards,
Nisit

AIX/Oracle system copy guide

Hi Experts,
I am preparing a system refresh (system copy) from production to test system via DB backup and restore.The two systems are on different AIX servers. The systems are running on SAP enterprise 6.20 on Oracle 9.2 and AIX.
I can only find the system copy guide for using R3load "Homogeneous and Heterogeneous System Copy for SAP® Systems Based on SAP Web Application Server 6.20"
Where can I find the SAP guide for the system copy? Thanks in advance for any helps.
Regards,
Chong Li.

Look at Operation Guides for NW2004S at http://service.sap.com/INSTGUIDES

System Copy Guide: Exporting the Source System Using SAPinst.

Hi Gurus,
I am trying to do Unicode conversion of ERP 2005 SR3 on Oracle/WS2003
The preparation steps are OK
When I execute the last Phase using Sapinst : "database instance export",
it finishes within one minute with the message "Database instance export has been completed succesfully"
but without exporting data.
I have follow up Unicode Conversion Guide and System Copy Guide System Copy for SAP Systems Based on SAP NetWeaver 7.0 SR3 ABAP+Java.
What could be wrong here?
Thansk for your help
Martial

So you need to set an environment variable
SAPINST_USE_HOSTNAME = <your-virtual-hostname>
for the user executing sapinst.
Markus

Upgrading Oracle XML Parser for Java v9.0.4 with Oracle Applications 11i

Guys, I applied ATG.PF.H.RUP4. In postinstall steps it is mentioned,Upgrading Oracle XML Parser for Java v9.0.4 with Oracle Applications 11i(doc-271148.1)
which says after applying patch 4038964 do the following--
AUTOCONFIG ENABLED APPLICATIONS ENVIRONMENT
If the Oracle E-Business Suite configuration files are maintained using the AutoConfig infrastructure, proceed with the following:
1. Run the AutoConfig utility.
2. Go to [JAVA_TOP].
3. Run the unzip -l appsborg2.zip | grep 9.0.4 command. If there is a file named as .xdkjava_version_9.0.4.0.0_production, which indicates that XML Parser for Java v9.0.4 is installed correctly as part of appsborg2.zip. Otherwise, run ADAdmin to regenerate the appsborg2.zip file.
4. Restart the application tier server processes such that the new version of Oracle XML Parser for Java will take effect.
but actually the patch is already applied- 4038964. How do i verify if i need to do these steps or not.
The xmlparserv2-904.zip file is already there in wrapper.classpath. of jserv.properties, forms.properties. So i think i dont need to do these steps.

unzip -l appsborg2.zip | grep 9.0.4
0 04-18-03 20:10 .xdkjava_version_9.0.4.0.0_production
do i still need to do that step?No, you do not have to since "XML Parser for Java v9.0.4" is already installed as part of appsborg2.zip

Looking for integration details of Kewill with Oracle Shipping execution

Hello Folks,
Has anyone done integration of Kewill (flagship) with Oracle Shipping 11i. Customer has plans to implement OTM later.
please provide me some details or documentation.
regards
girish
Edited by: 849679 on Apr 6, 2011 8:25 AM
Edited by: 849679 on Apr 6, 2011 9:02 AM

Pl do not post duplicate threads - Looking for documentation of Kewill Integration with Oracle Shipping
Srini

System Content Copy Guide For 2004s

Hi,
Can any one help me out how to perform System Content Copy for netweaver 2004s From Oracle 10.2 database ,windows 2003 servers to MaxDB 7.0,windows 2003 sever.
Thanks
Venu

this is not a system copy, this is migration
follow https://websmp102.sap-ag.de/osdbmigration
Cheers,
-Sunil

System copy tools for SAP Basis 46C.

Hi All,
I need to do system copy for SAP Basis 46c. I have a query regarding the tools used for system copy. It is written in the SAP Documents and we need to use the latest version of the system copy tools (i.e. R3load,R3check,R3ldctl,,R3szchk,R3trans).
I need to do the Heterogeneouse system copy
Source :- Oracle 9.2.0.8 , AIX 5.3
Target :- Oralce 9.2.0.8 (Or 10.2.0.4 if possible) , Sun Solaris
So my question is
1) Am i suppose to use only the tools (i.e. R3load,R3check,R3ldctl,,R3szchk,R3trans) which are compatible to relase 4.6C (Kernel 46D_EXT, latest path level is 2541) or
2) Can i download and use the Latest version of system copy tools (i.e. Withe release 7.00 for R3load,R3check,R3ldctl,,R3szchk,R3trans) to do the herogeneous system copy of SAP Basis 4.6C ??
Please reply.
Thanks

> Yes we are aware about the certified consultant. But before going for such a big project we wanted to find out the possibilities how we can minimise system downtime and optimize the process therefore wanted to have some information earlier.
Exactly that is the use of that consultant Those are experienced people who have done lots of migrations in the past, they know the possibilities of the tools and versions.
> So now i am very sure that we can use 10.2 while installation of new target system while doing heterogenouse system copy from oracle 9.2.
Correct.
> 1) Migration Monitor (source :-System copy & Migration optimization.pdf)
> The Migration Monitor is downward-compatible. As new features and bug fixes are only implemented in the latest version, SAP urgently recommends that you always use the latest version available.
You can use it of course but support of it is not "built in" - there's no clicker to check as is in newer versions of sapinst. You will need to modify the R3S file at the "correct place" to make use of it.
> 2) Distribution Monitor (Source :- Distribution Monitor (version 1.9.1) Usersu2019 Guide)
> Restrictions:-The following restrictions apply to the current implementation:The DM does not support system copies of releases lower than SAP_BASIS 6.20
So you can't use that option.
> 3) PACKAGE SPLITTING (source :-System copy & Migration optimization.pdf)
> The package splitting option is available and integrated into the system copy tools R3SETUP and SAPinst since SAP R/3 4.0B SR1.
The "old version" is a perl script, you'll need to make sure you have perl installed.
>
> 4) TABLE SPLITTING (source :-System copy & Migration optimization.pdf)
> AVAILABILITY:
> Table splitting can be used for ABAP systems with SAP kernel 6.40 or above
So that is also not usable.
> 6) R3LOAD OPTIONS - (source :-System copy & Migration optimization.pdf)
> R3load option '-fast' (<= 4.6D) or '-loadprocedure fast': These options are available
> u2022 from SAP kernel release 6.40 for - DB2/UDB - MSSQL - Oracle (see SAP Note 1045847 - Oracle Direct Path Load Support in R3load)
So it's also not built in for Kernel 46D_EX2.
> Request your final comments on the above points and Need to know whether parallel import and export can be done for 4.6C (46D_EXT Kernel) release using migration monitor. Please reply.
As I said before and as is written in the documentation, it can be used but not "by default", you'll make sure you stop at the right place with your migration to configure it manually (or the consultant will do).
Markus

System copy method for BusinessObjects BI Enterprise XI 3.0 (Windows)

Hi,
We intend to replicate the same existing BOBJ system for use with another project's development.
Does anyone know what is the easiest method of system copy for BusinessObjects BI Enterprise XI 3.0 (Windows)?
Will a blank copy through Window's backup/restore work?
Thank you.

Hi,
the easiest way would be:
- extracting all content from the existing 3.0 to a biar file
- install the new server os
- install all BO componentes on the new server
- import the biar file
You cant make something like an image from the existing server and then put it back on a new one. You have to rename the Server and than you will get problems with your BO installation. You can avoid this by re- deploying the WAR Files and updating the Repository Objects in the CMS.
But the above mentiones solution will be faster.
Regards
-Seb.

System copy guide searched

Hello,
I have to do a system copy of an SAP NetWeaver Business Intelligence system. Could someone provide me some tips and links to informations regarding the way of doing these kinds of copies with special interest in the differences of a normal system copy and a system copy with BI.
Thx in advance, Vanessa

Please check the following links
How to System Copy in SAP Business Intelligence System Landscapes (NW2004)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bff13df2-0c01-0010-6ba7-bc50346a6fd8
Strategies, Techniques, and Best Practices to Upgrade, Copy, and Migrate SAP BW Systems
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d163a7-0301-0010-d9b0-98f692ea3c60
Regards
Anujit Ghosh

Linux/Unix with Oracle hosting

Is it easy to find Unix hosting and using Oracle database as the Internet search proves that its very difficult.

Hai All,
Please forward the good pdf documents and
links describing the Redhat Linux Clustering with
Oracle.Check following link
http://www.oracle.com/pls/db102/to_pdf?pathname=install.102%2Fb15660.pdf&remark=portal+%28Getting+Started%29
Virag

Looking for documentation of Kewill Integration with Oracle Shipping

Hello Folks,
Has anyone done integration of Kewill (Flagship) with Oracle Shipping 11i.
please provide me some details.
regards
girish
Edited by: 849679 on Apr 6, 2011 8:25 AM

I have reviewed this already thanks anyways
we know that Kewill is integrated with Oracle WMS & OTM, not sure if this is integrated with standard Oracle Shipping execution.
Customer has been using kewill with 3rd party system.
regards
girish
Edited by: 849679 on Apr 6, 2011 10:34 AM

Is there a "step to step" guide for when you're new at Oracle

Hi all,
If just recently made my 1st database and I am stuck what to do next.
I have bought a few books and downloaded lots of information on the internet, maybe too much.
Is there an overview, step by step, what to do to get the database in a working condition, so I am able to make tables, views etc?
At first not too detailed, later I can fill in the blanks.
Thanks in advance
Hein

http://www.amazon.com/Oracle-11g-Dummies-Computer-Tech/dp/0470277653/ref=sr_1_2?ie=UTF8&s=books&qid=1254334776&sr=1-2
or Read The Fine Manual
http://download.oracle.com/docs/cd/B19306_01/server.102/b14220/toc.htm

Known Issues & Brtools Upgrade for SAP Netweaver 7.01 with Oracle 11.2.0.3?

Hi,
We are currently on Netweaver 7.01 with below SAP components running on Unix OS AIX 6.1 and Oracle DB 10.2.0.4
ERP 6.0 EHP4
CRM 7.0
BW 7.0
EP 7.0
Solution Manager 7.0 EHP1 on Windows
Now, we are planning to upgrade oracle from 10.2.0.4 to 11.2.0.3.
Can anyone please help us to have answers to below questions
1) any Known Issues / Problems faced and troubleshooting guide related to oracle upgrade 11.2.0.3 ?
2) Our SAP Kernel release is 701 patch level 150, do we need to upgrade brtools to 7.20 as specified in SAP Note 12741 ?
3) What could be the testing done after upgrade, apart from running DBcheck and update statistics ?
With Regards,
Parin Hariyani

>
> 1) any Known Issues / Problems faced and troubleshooting guide related to oracle upgrade 11.2.0.3 ?
>
Check SAP note 1431797.
> 2) Our SAP Kernel release is 701 patch level 150, do we need to upgrade brtools to 7.20 as specified in SAP Note 12741 ?
>
Check SAP note 1430669
> 3) What could be the testing done after upgrade, apart from running DBcheck and update statistics ?
>
You can also additionally run backup and database related jobs for testing.
Thanks
Sunny

System Copy guide for 4.7x200 on Unix with oracle

Similar Messages

Maybe you are looking for