System copy guide for Solution Manager 7.0 SPS15

Hello,
a new hardware is needed for our SAP Solution Manager 7.0 SPS 15. I will install a new SAP Solution Manager and do a system copy from the old hardware to the new one. There is no migration neccessary, because OS and DB will be the same.
Now I'm searching for some informations and guides to do a system copy of a SAP Solution Manager. All I found was a system copy guide of Netweaver 04s SR3/SR2 with informations about Java Usage Types but not for Diagnostics.
Are there any guides or howtos to do a system copy with SAP Solution Manager ABAP+JAVA? Does anyone have experiences and advices?
Kind regards,
Sascha Piotrowsky

> Looking forwards to this event I'm afraid of forgetting some dependencies or configurations which have to be changed also, like SMD-Agents configuration,s trusted connections, wiley introscope, e2e and so on.
Wily is not part of the copy - you will need to copy this "manually". The connections et al must be re-done...
Markus

Similar Messages

System Copy based on Solution Manager 4.0

Dear All
How to install System Copy based on Solution Manager 4.0
Thanks

Dear All
How to install System Copy based on Solution Manager 4.0
Thanks

System Copy Guide for ECC 6.0 ABAP stack

Dear All,
I'm unable to find system copy guide for ECC 6.0, there are lots of guides present for NW Systems on the SMP, couldn't find any thing for ECC6.0 ABAP Stack.
Could anybody please forward me the link.
Thanks in advance!

Hi,
Pls refer below link.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/801eba00-ec8a-2a10-eca6-c7f38bdd4d19
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/207ac87d-e28a-2a10-9caa-ac5d69dc9302
Regards,
Nisit

System Copy guide for 4.7x200 on Unix with oracle

Hi All,
Where can i get system copy guide for 4.7x200 on unix with oracle?
I searched it in Market place but could not get it.
Thanks in advance.
Chaitanya

Check
https://service.sap.com/nw04installation
--> Open "SAP Web AS"
--> SAP Web AS 6.40 SR1 and Related Documentation
--> Homogeneous and Heterogeneous System Copy
Markus

Is there any service desk guide for Solution Manager 7 configuration?

Dear Sir:
I would like to configure the service desk of solution manager 7.
but all i found documents are for solution manager 4.
the IMG setting and other steps are quite different...
wondering is there any new guide or step by step documents for specific solution manager 7?
Regards
Jack Lee

hi,
There is no direct document which is that much specific
Have you checked this document
https://websmp101.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000722612&_OBJECT=011000358700000122472008E
U can follow the steps and if u dont find any node u cn search in SPRO
in solman 7 mainly all the activities are under the node SPRO->scenario-specific->service desk
rest check this
Service Desk: Support team determination
/people/dolores.correa/blog/2007/10/06/service-desk-support-team-determination
Service Desk Implementation Guide
/people/bruyneel.guillaume/blog/2008/05/02/service-desk-implementation-guide-part-i
/people/bruyneel.guillaume/blog/2008/06/13/service-desk-implementation-guide-part-ii
Hope it helps,
Regards
Prakhar

Install guide for solution manager 7.1

HI,
i want to install solution manager 7.1 in linux system
and i not find in SDN the install guide
did you now where i can find it?
best regards
Naor Shalom

The installation guides are not available on the SDN but at
http://service.sap.com/instguides
Markus

Guide for Solution Manager

Can some one guide me about a new book or guide for using the Solution Manager?
Basically the "how-to" kind of information...even PDF documents would also be appreciated.
Pl reply.
Thanks

hi,
Just view the SAP tutor files available on sap marketplace(SMP login req)
Goto Service.sap.com
knowledge exchange on the left hand side you will have solution manager option
expand the same select 4.0 version(lastest)
Then you can select the learning map whichever applicable to you.
https://websmp204.sap-ag.de/support
Also visit the following links,
Weblogs Related to Solution Manager
/people/community.user/blog/2006/12/07/organize-and-perform-testing-using-solution-manager
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/16eaf8ea-0c01-0010-c1af-b3febfa33574 [original link is broken]
/people/sapna.modi/blog/2007/06/28/sap-solution-manager-40-project-management--business-blueprint-phase-part-iii
/people/sapna.modi/blog/2007/05/06/sap-solution-manager--roadmaps-introduction-part-i
Please reward points.

Client Copy for Solution Manager

Hello!
I need to know for the client copy phase , which clients do I need to copy from , for Solution manager 40 SR3.
Regards

ABAP
- SCC4: create a new client
- SCCL: copy client 000 with profile SAP_ALL to new client
- SCCL: copy client 001 with profile SAP_USER to new client
- PFCG: generate the profile for SAPJSF
JAVA
- Change the ABAP Client for UME with config tool
... reboot your server

Documentation for Solution Manager 4

Hi all!
Iam going crasy..
At the moment I am just customizing the solution manager 4. In the reference guide section create background jobs they refer to the configuration guide of the solution manager 4. 0 to get a complete list of background jobs for the solution manager 4.0.
Ive downloaded the configuration guide for solution manager 4.0 but there is no information about this. I know the place of documentation on the sap market \solutionmanager.
Did anybody know something more?
Thank you for help!
Best regards
Thomas

Hello Thomas,
Please in spro go to Basic Settings->SAP Solution Manager System->Schedule Background Jobs
The information of this point is more than enough to configure these jobs.
In a previous Configuration Guide you can see:
Periodic Jobs
Periodic Job scenario
REFRESH MESSAGE STATUS used to collect responses from SAP for messages
and Issues sent from the SAP Solution Manager
SOLMAN_ISSUE_STATUS_REFRESH Service Desk
SM:SCHEDULER Solution Monitoring
BTC_CMS_COLLECTOR Change Manager
LANDSCAPE_FETCH Implementation and distribution
CRM_ISSUE_REFRESH Implementation and distribution (testing)
Best regards,
Dolores

AIX/Oracle system copy guide

Hi Experts,
I am preparing a system refresh (system copy) from production to test system via DB backup and restore.The two systems are on different AIX servers. The systems are running on SAP enterprise 6.20 on Oracle 9.2 and AIX.
I can only find the system copy guide for using R3load "Homogeneous and Heterogeneous System Copy for SAP® Systems Based on SAP Web Application Server 6.20"
Where can I find the SAP guide for the system copy? Thanks in advance for any helps.
Regards,
Chong Li.

Look at Operation Guides for NW2004S at http://service.sap.com/INSTGUIDES

Some quick question for solution manager in 2 system landscape

First of all is there any way to not implement Solution manager but to still be able to patch the system.?
i really need it only for this.
If there is no way to avoid the solution manager, tell me is the saprouter the only way for connection to SAP for the patches download. I don't need anything else for now.
IS there a way to use a direct connection to SAP,?
do the sAP router has to have 2 NICs where one is the public and one the private IP?
i need to solve this one quickly so any help would be appreciated
Thank you in advance!

Hi,
you do not need Solution Manager to patch the systems but you need Solution Manager to approve download basket for downloading pacthes.
Information regarding the connection to SAP can be found at:
Note 35010 - Service connections: Composite note (overview)´
Hope this helps.

System refresh for solution manager

Hi All,
Do you think its possible to do a system refresh for solution manager?
Even though we do, wont there be a lot of inconsistencies between satellite system and with new solution manager?
Ideally i need do system refresh of X solution manager to Y solution manager
Thanks
Gopal

Hi,
How about the consistency between your two X and Y systems. Are they in single TMS. Requests properly transported from X to Y? If its positive, then go ahead you can make System Refresh..
Feel free to revert back.
--Ragu

Create a Support Message in Production system showing up in Solution Manage

Has anyone setup the link between creating a support message (under help) in a production system (like ECC) and SAP's Solution Manager.
I understand that it uses BADI SBCOS001 with the interface method PREPARE_FEEDBACK_BO, but when I try to run it, it tells me that Customizing for feedback functionality missing. What functionality is missing? And how to I correct this? And how do I ensure it shows in SAP Solution Manager under a solution or project?
Thanks
Paul

Hi Paul
The only way is to use the IMG. I have just completed this via the IMG info. BUT, it is not that simple.
Make sure your RFC's are trusted and that you have SAP ALL during config.
I hope this will help:
Setup Service Desk
Steps to follow while configuring support desk.
1) Implement the note 903587 .
2) Create all the relevant RFC objects in the satellite system and add the appropriate logical components using transaction SMSY.
3) Check all the objects in the table BCOS_CUST using transaction SM30.
Appl : OSS_MSG
+ :W
DEST :BACK RFC NAME (for solution manager system keep this field as 'NONE')
+ :CUST 620
+ :1.0.
*4) Check whether the BC sets are activated or not using the transaction SCPR20.If the BC sets are not activated then implement the note 898614.The steps to activate the BC sets are described below
4.1) Activate SOLMAN40_SDESK_BASICFUNC_000 BC Set.
4.2) Activate this in expert mode with option u201COverwrite everythingu201D.
4.3) Activation of the following components has to be done by replicating the previous steps
3.1) SOLMAN40_SDESK_TPI_ACT_AST_001
3.2) SOLMAN40_SDESK_ACTIONLOG_001
3.3) SOLMAN40_SDESK_ACT_ADVCLOSE_001
3.4) SOLMAN40_SDESK_TEXTTYPES_001
*Depends upon the number of inactive BC set objects that we have after the upgrade.
4.4) if the actions mentioned in 4.3 are not listed while executing the transaction SCPR20, then implement the note 898614.In the source client 000 of the solution manager system create a transport request using transaction SE09, unpack the file 'PIECELIST_SERVICE_DESK_INIT.ZIP' from the attachment of the note. Copy the contents of the file 'PIECELIST_SERVICE_DESK_INITIAL.TXT' to the transport request. And activate the actions. Use transaction SCC1 to import the transport request to the solution manager client. If any short dump occurs during the activation, implement the note 939116.
5) Check whether the number range is set correctly. If not set the number ranges of basic notification (ABA) and the support desk message (Service transaction SLFN).To be able to use the same number ranges for both message types, the internal number range for basic notification (ABA) must correspond to the external number range for the support desk message.
Number ranges for ABA notifications
5.1) create an internal and external number range using transaction DNO_NOTIF.
5.2) assign number range intervals to groups internal and external.
5.3) SLF1 is the internal number range group
5.4) SLF2 and SLF3 is the external number range interval
5.5) Use transaction DNO_CUST01 to assign message categories to the number range.
5.51) Go to transaction DNO_CUST01
5.52) From the GOTO menu select the menu item DETAILS
5.53) Now you can assign the number range of basis notification (ABA) into the notification type.
The number range for ABA notification is 12 characters in length and to make it compatible with the CRM service transaction insert 2 ZEROES at the beginning.
Number ranges for Support Desk notification
5.54) Use transaction CRMC_NR_RA_SERVICE, and define the internal and external number ranges. Intervals must correspond to the intervals of the basic notifications (ABA notification).
5.6) Then assign both the external and internal numbering
5.61) Go to SPRO and then to SAP Solution Manager
5.62) Then select General Settings and then select Transaction types
5.63) Select the transaction type SLFN and then select the menu item DETAILS from the GOTO menu.
5.64) In the Transaction Numbering block, assign the internal and external number range. The Number Range object should be CRM_SERVIC.
5.7) To view the priorities use transaction DNO_CUST01 and select the notification type as SLF1 and then select priorities from the left pane of the screen. The priorities of the first four cannot be deleted, but new priorities can be added.
6) Check the Action profiles for ABA Notifications (Action profiles are used for synchronization of ABA notification with the CRM Service transaction).
6.1) To check the action profiles use the transaction SPPFCADM and select the application type DNO_NOTIF then select u2018DEFINE ACTION PROFILE AND ACTIONSu2019.
6.2) Select the item u2018SLFN0001_STANDARD_DNOu2019 and then from the menu GOTO, select the menu item DETAILS.
7) The Action profile u2018SLFN0001_STANDARD_DNOu2019 has to be assigned to the message category SLF1 (ABA notifications) using the transaction DNO_CUST01.
8) The action profile for the support desk message can be set to u2018SLFN0001_ADVANCEDu2019.
8.1) From SPRO select SAP Solution Manager then Scenario Specific Settings.
8.2) Select the item Service Desk and then to general settings.
8.3) Execute the category u2018Define Transaction Typesu2019.
8.4) Select the transaction type as SLFN
8.5) From the GOTO menu select the menu item u2018DETAILSu2019 and assign the action profile as SLFN0001_ADVANCED .
9) Activate the partner/ Organization
9.1) Go to CRM->MASTER DATA->BUSINESS PARTNER->INTEGRATION BUSINESS PARTNER ORGANIZATION MANAGEMENT->SET UP INTEGRATION WITH ORGANIZATIONAL MANAGEMENT.
9.2)Find the entries starting with HRALX
HRALX-HRAC WITH VALUE 'X'.
HRALX-OBPON WITH VALUE 'ON'.
HRALX-PBPON u2018ONu2019.
HRALX-MSGRE u2013 u20180u2019.
9.3) If entries are not found create it.
10) Generate Business partner screens
10.1) Go to transaction BUSP.
10.2) Execute the report with the following parameters
CLIENT - Client in which business partners should be created (solution manager client)
APPLICATION OBJECT-
SCREEN - *
Generate all/ selected screens - All screens.
delete sub screen containers -
11) implement SAP note 450640.
11.1) Go to transaction SA38 and select the report CRM_MKTBP_ZCACL_UPDATE_30.
11.2) Execute it with test mode box unchecked.
If a new relationship is to be created then steps 12 and 13 has to be followed
12) To create a relationship category
12.1) Go to transaction BUBA
12.2) Select the entry CRMH00: Undefined relationship
12.3) click on copy
12.4) Rename CRMH00 to ZCRMH00.
12.5) CREATE A RELATIONSHIP CATEGORY.
IN GENERAL DATA FILL LIKE ' FROM BP1 : HAS THE ACTIVITY GROUP '.
' FROM BP2 : IS A PART OF ATTUNE
13) Add the relationship category to the support team partner function
13.1)Use SPRO
IMG GUIDE->SAP SOLUTION MANAGER->SCENARIO SPECIFIC SETTINGS->
-> SERVICE DESK->PARTNER DETERMINATION PROCEDURE->DEFINE PARTNER FUNCTION.
13.2) FIND THE PARTNER FUNCTION SLFN0003 (SUPPORT TEAM).
13.3) In the field relation ship category, Select the newly created relationship category and save.
14) Steps 12 and 13 should be repeated for various business partner types like sold-to-party, message processors if new relationship is to be created for the respective business partner types.
15) Create a new access sequence for the support team determination
15.1) Go to the following IMG Path: SAP Solution Manager Implementation Guide ->
SAP Solution Manager -> Configuration ->
-> Scenario Specific Settings ->Service Desk -> Partner Determination Procedure ->
->Define Access Sequence
15.2) Click on New Entries
15.3) Define a new access sequence with sequence name as u2018Z001u2019 and description u2018NEW BP RELATIONSHIP ACTIVITY GROUPu2019
15.4) Create an new Individual Access with the following value:
u2022 Batch Seq: 10
u2022 Dialog Seq : 10
u2022 Source : Business Partner Relationship.
u2022 Detail on the source:
u2022 Partner Function : Reported By (CRM)
u2022 Mapping/restrictions
u2022 Flag Mapping/definition for partner being Searched
u2022 Partner Function in Source: Support Team (CRM).
Save it.
This Access Sequence will give us the Partner which has the relationship assigned
to the Support Team in the Reported By partner data.
16) Adapt the partner determination schema/Function
16.1) Go to the following IMG Path: SAP Solution Manager Implementation Guide ->
SAP Solution Manager -> Scenario Specific Settings ->Service Desk ->
-> Partner Determination Procedure -> Define Partner Determination Procedure.
16.2) The two options to adapt partner determination schema are
16.21) Adapt the standard Procedure (SLFN0001) or to create a new one by copying the standard one.
16.22) select the line starting with SLFN0001 or the newly created procedure.
16.23) Double Click on Partner Function in Procedure.
16.24) Select the Partner Function "Support Team", and click Details.
16.25) in the detail view only change the Partner Determination/access Sequence to
the one we've just created. Save your entry.
17) Create a root organizational model.
17.1) Go to the following IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Configuration-> Scenario Specific Settings ->Service Desk -> Organizational Model ->Create a Root Unit for Your Organizational Structure.
17.2) creating an organizational unit by entering the data in the BASIC DATA tab.
17.3) enter the organizational unit, the description and save it.
18) Create the support team organization
18.1) go to the following IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Scenario Specific Settings ->Service Desk -> Create Organizational Objects in the Organizational Structure. Or use transaction (PPOMA_CRM).
19) Create the business Partners.
19. 1) Key users- End user (Business Partner General) ,Address should be specified.
19.2) go to the transaction BP.
19.3) create a new Person, Select the role: Business Partner (Gen).
For Identification of the key user
19.31) click on the identification tab
19.32) enter a line in the identification number formatted as follows
IDTYPE : CRM001.
Identification number : <SID><INSTALL NUMBERS><CLIENT><USERNAME>
eg: USER NAME : USER1.
CLIENT : 100.
SID : ER1.
INSTALL NUMBER : 123456789.
IDENTIFICATION NUMBER : ER1 123456789 100 USER1.
20) Message Processors- Support Team members .
20.1) they should be created first as the users in the corresponding client of the solution manager.
20.2) As business partners they will have the role 'EMPLOYEE'.
20.3) Go to transaction BP .
20.4) Create New Person with the role employee.
20.5) In the Identification tab you should enter the user name in the employee data/User Name.
eg: username: proc1
enter proc1 in the field User name.
21) Organizational Business Partner- Organizational BPS have the same country in there main address tab. They should be created through the organizational model. Business partner corresponding to the root organization have the role 'SOLD TO PARTY'.
22) Assign the business partners (Message Processors) to the previously created support team.
22.1) Go to transaction PPOMA_CRM.
22.2) Select the support team 1.
22.3) Click on create
22.4) select position
22.5) call it 'MPROC_T1/Message Processors for team 1
22.6) Replicate it for the other support teams.
22.7) Select the position MPROC_T1/Message Processors for team1 and click assign,
choose owner/Business Partner find and select the business partner
22.8) Validate and Save it.
22.9) If the assignment of business partner is not possible then implement the note 1008656
Or 997009
23) Create the iBase component
23.1) IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Basic Settings -> Standard Configuration of Basic Settings -> Solution Manager -> iBase -> Initially Create and Assign the Component Systems as iBase Components.
23.2) or use the transaction IB51 to create the installed base.
23.3) it is also possible to create the SOLUTION_MANAGER, select the solution and go to menu Edit -> Initial Data Transfer for iBase.
24)Assign Business Partners to iBase Components
IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Basic Settings
-> SAP Solution Manager System ->ServiceDesk-> iBase -> Assign Business Partners to iBase Components.
*--optional--
If you want to be able to assign the System Administrator: Go to the IMG: SAP Solution Manager Implementation Guide -> Customer Relationship Management -> Basic Function -> Partner Processing -> Define Partner Determination Procedure.
Select the entry "00000032 Installed Base/IBase" and double click on Partner Functions in Procedure.
Then copy the Entry "Contact Person (CRM)" to a new entry with the partner Function "System Administrator (CRM)" , save it.
Go back to transaction IB52, select a component, and Goto -> Partner, you should be able
now to assign the partner Function "System Administrator".
25) Assign the SAP Standard Role to the user. Message Creator should have the role : SAP_SUPPDESK_PROCESS.
26)Define the transaction variant for the message processors
Go to the following IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Configuration -> Scenario Specific Settings ->Service Desk -> General Settings -> Specify User Selection Variant.
Here we will create variants for the central message processing transaction CRM_DNO_MONITOR.so that the user will have direct access to there dedicated message.
27) Go to transaction PFCG
27.1) Enter the role name as Z_MSG_PROCESSORS and choose single role.
27.2) Give a description Message Processor role and save it.
27.3) Go to the menu tab and choose add report
27.4) select the report type : ABAP Report
27.5) And in the report enter the report name as 'CRM_DNO_SERVICE_MONITOR'.
27.6) Enter the previously created variant.
27.7) flag the skip initial screen box.
27.8) flag the SAPGUI for windows.
27.9) Create a new transaction with tcode starting with Y or Z.
27.10)Display this transaction and check the values at the bottom of the screen
in the subscreen Default Values, you should have the following parameters:
u2022 D_SREPOVARI-REPORT = CRM_DNO_SERVICE_MONITOR
u2022 D_SREPOVARI-VARIANT = MY_TEAM_MSG
u2022 D_SREPOVARI-NOSELSCRN = X
And also all the user should have the correct role.

Wily Introscope Version for Solution Manager 7 SPS 17

Hi
We have a solution manager 4 (now 7) running on an ABAP stack only, this was recently upgraded from Solution Manager 3.2 which was installed 3 years ago as ABAP stack only, this server was never powerful enough to have the Java stack added and the project did not require it.
I am now looking to migrate this ABAP Solution Manager 7 to a new server, using ABAP & JAVA so I can make use of Solution Managaer tools like Diagnostics, RCA, WILY etc.
On a sandpit copy I have migrated the ABAP instance to a more powerful server and added the Java Instance from the Solution Manager 4 Installation Master, so I now have a dual stack SM 4, I have patched this to SP17.
I am looking to install Wily Introscope for monitoring, I have read Note 797147 - Wily Introscope Installation for SAP Customers, where it says you should always use the latest version of Wily, which is 8.0.2, but looking at the note, the downloads for Introscope Enterprise Manager and Introscope Workstation are from SAP SOLUTION MANAGER 7.0 EHP 1, but I am not running Solution Manager on EHP1, I am on SP Stack 17.
Looking in the SWDC there are downloads in SAP SOLUTION MANAGER 7.0 -> Entry by Component -> Solution Manager JAVA Stack -> WILY INTROSCOPE ENTPR MGR 8
Is this what I should be using for my SP Stack 17, or should I use the EHP1 version?
Also, setting up the Solution Manager Diagnostics, is there a setup PDF for Solution Manager 7 SP17 ? I cannot find a setup guide for this release, most are for EHP1, I would rather not have to implement EHP1 as part of this migration !
Thanks for any help.
Paul.

Hi Bhudev
Thanks for the reply, I presumed it was the Wily introscope 8 without the EHP1 I required.
As for installation guide, I have think you have misunderstood my question, I already have the wily installation guide from the note location, I wanted to know if there is any Solution Manager Diagnostics setup guides for SP17 ?
When I use transaction SOLMAN_WORKCENNTER --> System Monitoring --> Solution Manager Diagnostics --> Diagnostics System --> Diagnostics Setup --> Setup Wizard
the first 2 (of 23) setups are failing :
SSO The value of profile parameter login/accept_sso2_ticket could not be checked
BI Cannot invoke CCMSBISETUP on host localhost
Warning :
User(BI) Role SAP_BI_E2E does not exist
Then it says :
To complete the Diagnostics Setup, you should perform the following operations as documented in Diagnostics Setup Guide
I cannot find this Diagnostics Setup Guide for SP17 ?
The installation guides are mainly for EHP1, media library under sap-ag.de/diagnostics does not show this setup guide, Master Installation guide does not mention it, so was wondering if anyone could point me in the right direction for this guide ?
Thanks,
Paul.

System monitoring configuration in solution manager EHP1

Hi all
I am in a bit of fix
We have upgraded our solution manager devlopment to EHP1
Now I have added one system through SMSY in solution manager to configure system monitoring
I have generated all the RFC's,I have created the logical component and solution and assigned the system to the solution
When I check my solution it is looking fine
Now when I go within solution and click on the tab system monitoring
It shows me on the left hand side -> Set up system monitoring
when I click on Set up system monitoring on the left part of SAP screen,strangely it doesnt take me to the activation of screen monitoring,it just shows me the best practices documents on the right side but nothing more than that
I have checked many guides,blogs and SAP tutors anfd have followed them but strangely I am not been able to go to the screen for activating system monitoring
Are there any activities that need to be done after upgrading to EHP1?
Are there any services to be activated for system monitoring?
Please advice
Rohit

I'm not 100% sure that it is necessary, but it won't hurt.
Perhaps the essential adjustment you need for system monitoring is being done in there.
It won't hurt

System copy guide for Solution Manager 7.0 SPS15

Similar Messages

Maybe you are looking for