System does not allow to enter data into cube

Hello
I use BPS NW2004s. I created a layout and execute "enter plan data". I realized that system does not allow me to enter data. Why?
Alex

I guess your cube is not transactional. Try to switch it to transactional

Similar Messages

  • System does not allow to void the payment on same day

    Dear All,
    System does not allow to void the payment on same day in R12. e.g. If payment is made on 18-NOV-2010, system does not allow to void on 18th. We can void payments if void date is greater than payment date.
    Please let me know if you have any information to void payments on same day.
    Thanks in Adavnce.
    Thanks,
    Astik

    Hello Victor,
    the data collection method CCMS_OS_COLLECT is an ABAP report as you can see in the method overview in rz21. This report is used to collect the operating system data and send it to the CCMS.
    As soon as you install the sapccm4x agent on an instance the agent will take over the data collection for the operating system subtree (this is also described in [note 522453 |http://service.sap.com/sap/support/notes/522453]. Important: point 4. of the note!). I.e. as soon as the agent is responsible for the data collection you will see the mentioned CCMS_Cpu_Collect_c.
    If the MTE doesn't display data you should check if the agent is running.
    Regards, Michael

  • System does not allow to me to change collect method in RZ20

    Hi.
    I Have the problem with my SAP R/3.
    I have productive, based on 4 application servers. In RZ20, alerts of  MTE Operating System for one application server is not work. In nodes properties I have collect method "CCMS_Cpu_Collect_c". On other application servers - "CCMS_OS_Collect". System does not allow to me to change collect method
    What will I do? Please help me.
    Edited by: Viktor Unsub on Jul 18, 2008 4:55 PM

    Hello Victor,
    the data collection method CCMS_OS_COLLECT is an ABAP report as you can see in the method overview in rz21. This report is used to collect the operating system data and send it to the CCMS.
    As soon as you install the sapccm4x agent on an instance the agent will take over the data collection for the operating system subtree (this is also described in [note 522453 |http://service.sap.com/sap/support/notes/522453]. Important: point 4. of the note!). I.e. as soon as the agent is responsible for the data collection you will see the mentioned CCMS_Cpu_Collect_c.
    If the MTE doesn't display data you should check if the agent is running.
    Regards, Michael

  • How to Uninstall Yosemite?  System does not allow Erase the HD, nor does it allow re-install of original O/S Disc (10.6.7).  I want Mavericks or even Lion Back.   Thanks.

    How to Uninstall Yosemite?  System does not allow Erase the HD, nor does it allow re-install of original O/S Disc (10.6.7).  I want Mavericks or even Lion Back.   Thanks.

    Start with reinstalling Snow Leopard:
    Clean Install of Snow Leopard
    Be sure to make a backup first because the following procedure will erase
    the drive and everything on it.
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. After you finish Setup Assistant will complete the installation after which
             you will be running a fresh install of OS X.  You can now begin the update process
             by opening Software Update and installing all recommended updates to bring your
             installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1 Access the App Store to download Mountain Lion or Yosemite. Mavericks is no longer available since the release of Yosemite. If you purchased Mountain Lion from the App Store, then you can redownload it via your Purchases page in App Store. If not, then you will need to purchase it from Apple;
    Purchase a redemption code at the Online Apple Store: OS X Mountain Lion. Mountain Lion is $19.99 plus tax. Use the code to redeem a download of Mountain Lion from the App Store. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.

  • How to block a payment in F110, when the system does not allow us to block

    Hi all
    Blocking of a payment happens in the following areas :
    1.  In a single document Fb02 transaction we can block a document by giving A as option for not paying for that document before going to F110.
    2.  We can also block a vendor through Vendor master area
    3.  We can block a Vendor from paying through Xk05.
    Now my doubt is that.... i had saved a proposal in F110, after saving it, now i want to block a payment for a vendor.  But the system does not allow me to block it.  Why the system does not allow the block.  Or is there any type of error like this, that system does not allow the block after setting up the proposal for payment.
    Can anyone help me out in this...
    thanks and regards
    SL

    Dear,
    Even you set payment block after saving the proposal system will execute that payment. So better you delete this proposal and then set payment block in the vendor line item. Thereafter system will pick that bill for payment.
    Regards,
    Chintan Joshi

  • The new maverick system does not allow me to watch Sky - Any ideas when this is going to be resolved?

    The new maverick system does not allow me to watch Sky - Any ideas when this is going to be resolved?

    Press the escape (esc) key to exit full-screen mode.

  • System does not propose the delivery date based on factory calendar

    Hi,
    I am creating a sales order for a delivery date for this sat which is (2/22/09)
    I have maintained 2 separate calendars for
    1) shipping point
    2) for the route
    The route has a transit time of 1 day and the calendar has sat and sunday as non working.
    the Shipping point has a pick/pack time of 1 day and the calendar has sat and sunday as non working
    The material is available in the warehouse
    Now when i create this sales order i enter the delivery date as 2/22/09, the system does not propose me the delivery date of monday (i.e 2/23/09) It accepts the 2/22/09 delivery date.
    In the schedule line i do see the date as 2/22/09 only.
    The delivery was created with the following dates
    Picking = 2/17/09
    Transportation Planning = 02/18/2009
    Loading =02/18/2009 
    Planned GI= 02/18/2009
    Delivery Date = 02/22/2009
    How can the system give me the delivery date of a sunday when the calendar doesnt allow sunday as working day.
    Also the route time is 1 day in transit so i am not sure why the system is proposing a 3 day transit time?
    Can any one explain the behaviour of SAP for the delivery date logic

    Dspsac,
    Delivery date can be any date.  For instance, if your customer insisted on a Sunday delivery, you would accommodate him, regardless of any calendar.
    From the delivery date, the system counts backwards USING THE FACTORY CALENDAR ASSIGNED TO THE ROUTE by the number of days in the route.  You have to consult the FC assigned to your Route to determine if the GI date has been properly calculated.
    From the GI date, the system counts backward Pick/pack time, using the shipping point calendar, to arrive at Material availability date.
    Calculations are explained in SAP online help
    [Transportation and Delivery Scheduling|http://help.sap.com/erp2005_ehp_04/helpdata/EN/dd/5607e7545a11d1a7020000e829fd11/frameset.htm]
    Regards,
    DB49

  • Kotoeri (japanese input system) does not allow input

    I've been using Kotoeri to type in Japanese and it's been working just fine until recently. Now when I select Kotoeri and tried to type, the cursor disappears and what I type does not appear on the screen. If I type ten letters, one or two of those letters may show up, or none at all. Most times it freezes for a brief period. It's not just Japanese characters that are not appearing. Normally, two alphabets convert to one japanese letter, but even alphabets cannot be entered when I'm using Kotoeri. (Sorry - it's really hard for me to explain). My system software is up to date, and I've tried restarting but it didn't solve the problem. Any tips?

    Great! I went to the link, which described the problem I was having in a much better way, and I followed the steps described there. I'm new to mac and still don't understand how it worked, but it did Now my concern is I will use the strategy for any and all problems, but I imagine there got to be some risks when I delete "preference" files, right? Oh, and I thought I searched for similar topics before I posted my question, but couldn't come up with anything. I must've done something wrong there, too. So my apologies for posting redundant question. Thanks for your help and patience; it was much appreciated.

  • System does not reset asset retirement date for Depreciation Area specific transaction after area has been deleted

    Good day,
    I needed to create a new depreciation area in a live system. The depreciation area would not post to the GL, but would be used for tax purposes in a currency other than the local currency. When creating this area the asset values were translated at the system exchange rate which did not agree with the values of the manually maintained tax register. I proceeded by creating new transaction types that would only post to the new area, one of which was an asset disposal transaction, which would be used for downward adjustment of the APC value. I made my adjustments at the end of the previous financial year, but had to start over and proceeded to delete the depreciation area to allow me to start over.
    After reinstating the depreciation area, my original adjustments were removed, however the assets which APC values needed to be adjusted downward using the disposal transaction, was giving me the AA 478 Posting transaction is not possible (value date not allowed) error.
    I've reviewed the asset postings and there is no record of my original adjustment documents. The problem seems to be that field ANLA-ABGDT (Last Retirement Date), is still indicating the date of my previous adjustments and that this was not updated when the Depreciation Area was deleted and reinstated.
    Again, I do not have any documents which I can access or reverse to update this table. Is there any way to clear this field without reversing the disposal document?
    I'm also looking at implementing SAP note 1618286, to make error message AA478 a warning. I could not implement SAP note 533378 since it only supports component version 46c and we are currently running component verson 605.
    I would appreciate your consideration of my problem.
    Regards
    Marius

    If you are in Test System, you can use function module AA_AFABER_DELETE to totally delete the depreciation area (tcode SE37, specify chart of depreciation and depreciation area), After that recreate your depreciation area and run AFBN. But before you do that, have you created a retirement transaction type that limits the posting on your new depreciation area? If not create one.
    Hope this helps.
    Thanks!
    Jhero

  • I keep getting error -50 on itunes when i try to login through my apple id. I am able to access itunes store but it does not allows me to sign into my id

    When i try to login with my apple id i keep on getting error saying "We could not complete your itunes store request. An unknown error occured(-50)." I get this error everytime i try logging into my account. But still i can access to the iTunes store. I had recently downloaded this iTunes software into my new windows 8.1 laptop so i think it is up to date. I have earlier used this apple ID into another iTunes conneted to my older PC(I haven't logged out from it yet.Could that be the problem?).

    Ok.
    Seems this is a well known problem.
    https://discussions.apple.com/thread/3574459?start=0&tstart=0
    Killing the APSDaemon.exe works for me!

  • MIgration assistant does not allow transfer of data from OS 10.5.8 to OS 10.7.4, MIgration assistant does not allow transfer of data from OS 10.5.8 to OS 10.7.4

    hi
    I have a G5 quad processor machine and am trying to transfer data from this to a new Mac Mini server running 107.4...
    Migration assistant open on both computers
    both using latest software versions and connested with ethernet across a functioning network.
    can browse the discs of both computers.. each computer can see the other
    The newer computer cannot link to the older one iwht migration assistant.... the older one cannot see the newer one in mgration assistant
    what to do now?

    After Lion was released, Apple released an update to Migration Assistant for 10.6.8 and 10.5.8 systems, which is required to do some types of migration to Lion. (That update was in August 2011.)
    Had you installed that update on your G5? It should have been offered via Software Update.
    If in doubt, you can download the Leopard version here and install it manually.
    If it still doesn't work, your next option would be to try migrating via a Firewire cable instead of using Ethernet. This would involve running Migration or Setup Assistant on the new computer, and starting up the old computer in Firewire Target Mode. (Migration or Setup Assistant provides detailed instructions after you choose Firewire as the migration method.)
    A possibly related issue: is the G5 running Mac OS X Server? I've never tried using Migration Assistant to migrate a server, so I don't know whether that might have additional issues to deal with.

  • It does not allow me go in a webpage that i could previously use, it just does not allow me to log into the webpage

    i previously using firefox could access this webpage, but it logged me out and from then onwards i could no longer logg into the webpage as it keeps denying my information to log in, it is not the webpage as i can log in using internet explorer so i assume that the problem lies with firefox and the webpage.

    Numbers documents from iOS need Numbers 3.2 on a Mac to open. And Numbers 3.2 requires Mavericks. If you are using Mavericks you can get Numbers 3.2 from the Mac App Store. It will be free IF you have Numbers 2 (iWork '09) installed. Otherwise you must buy it.
    Your other option is to send the Numbers file as an Excel file via e-mail to yourself to open with an earlier version of Numbers.

  • Well, i have a macbook and i had my iphone 3s but since it was old i just bought my iphone 5s but the problem is that i can not transfer music because i can not download the latest version of itunes because the system does not allow me so what can i do?

    i mean it is the same brand i only use apple products, there should not be inconviniences like this being from the same brand, if it is a different brand like windows or whatever i understand but in this case is different i think

    Contact Apple
    http://www.apple.com/emea/support/itunes/contact.html

  • System does not allow change to matrial master as there is open transaction

    Hi,
    I am trying to change an existing material master (MM02 of account view 1) to split valution, however, I encounter the following log message which prevent me to change the valuation category.
    Message Log
    The Valuation Category Cannot be Changed for the following reasons:
    Production Order (basically IW33 PM refurbish order) already exist.
    PlantOrderItem
    1000-4018111--1
    Suprisingly the PM order is closed and it has the following status:
    CLSD, PCNF, DLV, GMPS, MANC, PPRT, PRC, SETC.
    May I know how to resolve this so that I can update my material master to split valuation in accounting view?
    Thanks.
    Tuff

    Hi
    When you are getting error while changing the valuation category for any material in MM02, you can see one icon of display error, please click on that and here you can see all details about what you need to do.
    Split valuation
    Valuation Category change in accounting view in material master
    Valuation type - Removal
    http://help.sap.com/saphelp_470/helpdata/en/90/ba6228446711d189420000e829fbbd/content.htm
    Hope this will help you to solve your problem
    Regards
    Praveen P C
    Edited by: Praveen Chirakkel on Aug 2, 2011 11:34 AM

  • HT3180 I tried again later several times and am afraid the rental period will expire and will not be able to watch the movie. The system also does not allow me to re-purchase the movie.

    I've rentented a movie and would like to watch it. Consistently I receive the message "an error occured loading this contnt ...try again later". I've tried over a long period several times but always receive the same message. Also, I tried to re-purchase the movie but the system does not allow this. It just confirms "you have already rented this movie". any suggestions. Can't I just cancel the rental since I have not even fully streamed the movie/

    Likely network related
    What is your current connection, use speedtest
    Go to istumbler or netstumbler to get a report of the network, look for signal strength and noise
    If on wifi try Ethernet
    Make sure DNS is set to automatic (settings - general - network)

Maybe you are looking for