System error in File Adapter

hi experts,
I have a File to File (FTP) scenario.
The message caught the system error in the Adapter engine with out any error message.
the last message noted in the adapter engine is
Success File adapter receiver: processing started; QoS required: ExactlyOnce
Please suggest to resolve the error.
Thanks in advance,
MK

Raj,
As i mentioned above,
                                  the last message noted in the (audit log)adapter engine is
Success File adapter receiver: processing started; QoS required: ExactlyOnce
Agasthuri Doss,
                           There are no error messages.
               It shows the message: Processing started
                                                 Polling interval started. Length: 60.0 seconds
                                                  Processing finished successfully
        And the file is deleted from the source directory.
Edited by: mk.xi on Feb 25, 2008 1:51 PM

Similar Messages

ITunes.exe - System error / corrupt file

I purchased an iPod nano about a month ago. Since then about every week my entire iPod content is erased while i transfer music to iTunes. All of a sudden it disconnects and says "iTunes.exe - System error / Corrupt file". Each time this happens I need to restore my iPod, which does not help either. I have the latest iTunes version and I downloaded the iPod updater, however none of them make a difference in the situation. I would really like to know whether this can be solved or I need to return the device to the store.
iPod Nano 2GB Windows XP

Have a look at this informative link by forum member Da Gopha: Da Gopha - If Windows displays an iTunes.exe corrupt file/chkdsk message

Error with file adapter

HI ALL,
Our Secnario is Bapi to File.Hear in the Target side we have two target folders.For that I am internally place my file in the PI and pick up the file from PI and posted to end directories.For that Hear i am using 2 flows form BAPI to FILE.But problem is when i am monitoring the Receiver comm channel at target PI system its shows some error like Unable to clone File Adapter receiver channel for parallel processing and files are not posted in the target system
please provide the better solution for this issue
Thanks & Regards,
Satya

Hi,
I am internally place my file in the PI and pick up the file from PI and posted to end directories
Elaborate that process.
How to split the target directories. In this scenario is BPM? or Any rule implemented in Receiver determination.
Regards
Vijaykumar

Error on file adapter (GENERAL_ERROR on XI_J2EE_ADAPTER_XI_HANDLER )

Hi Experts,
I have just configured a sender file adapter with content conversion in a PI 7.0. I will try to explain the problem:
1. I put the text file on the selected folder, to be taken.
2. The file is taken from the folder and archived in the archive folder.
Until here everything works fine, but from here:
- I can't watch the message in the sxmb_moni
- I can watch the message in the message monitoring in the Runtime Workbench. Here I can even see the XML well formed(the text file have been processed correctly)
The error log:
Message Data
Attribute Value
Engine Adapter Engine
{Status System Error
Repeatable Yes
Cancelable Yes
Error Category XI_J2EE_ADAPTER_XI_HANDLER
Error Code GENERAL_ERROR
Does anybody know where will be the error?
Regards
Gonzalo

Hi,
please check the following links related to your error category.
File (xml)>>xi>>IDoc
Problem in JDBC Reciver Channel
Problem in Webservice -> XI -JDBC
regards
mahesh.

Error in File Adapter

I am getting an error in the Sender File adapter as "Configured source directory does not exist". Any idea?
FYI..
@source structure path is
IP address\Orders
@File Name is orders12122006.xml
@Transport protocal is File System and MP is File,processing mode is delete.
@I can't see any messages in SXMB_MONI and Message monitoring
@I got the above error message in File comm channel of Adapter monitoring.
@I tried the source structure as D:\Orders, \Orders, D:/Orders but no luck
@I am in the LAN and able to map the XI server to my PC.I can read and write to the specified folder of the server
@My System OS and server OS are both running on Windows.
Thanks in advance
Raju

HI sridhar,
for making your system as FTP Location:
Follow weblog: /people/shabarish.vijayakumar/blog/2006/08/01/along-came-a-file-adapter-mr-ftp-and-rest-of-the-gang
Then you can use ipaddress of your system.
Put your file in C:\ftproot folder. and give source path as '/'.
It should work.
=>If you want to use NFS only, Give ipadress of XI Sytem and place file at particular location D:\ORDERS.
Cheers,
Vijay Raheja

Internal system error 500 in Adapter call

Hi Guys,
I am processing the following scenario in XI
File -> XI -> SAP R/3
User place the data file in a directory, XI process the file and call a RFC FM in R/3.
After successful processing, file will be moved to Archive directory.
I am getting an error - Internal system error 500 in Call Adapter section in the Monitoring screen.
I enable the XI service in SICF.
SLDCHECK returns 4, even though it opens the SLD page.
Any other configuration steps need to be checked to make sure other system are connected.
How to restart the process again.
Thanks
Senthil

Hi,
I have done the following configuration checks.
XI service has been activated in SICF
RFC Connections are working.
TCP/IP - LCRSAPRFC & SAPSLDAPI
HTTP Connections u2013 XIHUB
SLD integration settings using SLDAPICUST is correct.
SLD update settings using RZ70 is set.
SLDCHECK from XI is working.
SLDCHECK from SAP is failed.
Anything else I need to check or set.
Cheers
Senthil

Payload at Adapter for System Errors - SOAP receiver adapter

Hi Everybody,
I am working on an Idoc to SOAP asynchronous scenario.
There are connection issues between SOAP adaper and the target webservice.
I need to capture the Idoc number from the message payload for the Erroneous messages at the adapter for the System errors.
Is there any way of capturing field values from the payload (Say, Idoc number) at the SOAP receiver Adapter level.
Helpful answers will be rewarded points.
Thanks & Regards,
Zabiulla

Hey,
I think you need to implement a module inorder to get the payload at receiver adapter module.
As far i concern you can not directly refer the payload in adapter in receiveer communication channel unless you have your own module, which gets the payload. Check the Modules tab in the communication channel and also regarding how to get the payload for error information, follow the steps mentioned in the below link, which gets the payload in file. hop it will resolve your issue.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/writepayloadtoafilefromAdapter+Module
Regards..
Prasanna..

Error-Receiver File Adapter using Variable substitution when file is empty

XI Experts,
We are on PI 7.0, SP14.
We are using variable subtitution to get the filename from source message. This works fine as long as we have data in the payload for filename element. But we have a scenario where we don't have to create file when certain condition does not exists in source message so in the message payload filename element will not exists in such condition and file will be empty and we should not create file.
Parameter in the communication channel for Handling empty message is "Ignore".
Does anyone knows how to handle this scneario. We don't want to default any file name in the message mapping if source file name element does not exists.
We are following getting error in the Adapter engine.
MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: file: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: file
Thanks
MP

You can implement this by writing the module to throw an exception or whatever method you want to execute.
If you don't want to receive an error message then module is suitable for you.
Gaurav Jain

Receiving "Invalid char in text." error from file adapter

I'm testing a file adapter and am receiving the following error:
Invalid char in text.
The invalid character seems to be the ascii Record Separator character, Hex 1E, HTML 

Is it possible for me to modify the file adapter schema to handle this character?

The HTML description should have been this (minus space characters)
& # x a ;

Getting error in File adapter while using ChunkSize

Hi,
I am trying to move a large file using the ChunkSize property of the file adapter as shown below. However I am getting the error during the run time in the SOA server.
Code used:
<adapter-config name="SyncReadFile" adapter="File Adapter" wsdlLocation="SyncReadFile.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/FileAdapter"/>
<endpoint-interaction portType="SynchRead_ptt" operation="SynchRead">
    <interaction-spec className="oracle.tip.adapter.file.outbound.FileIoInteractionSpec">
      <property name="DeleteFile" value="true"/>
      <property name="PhysicalDirectory" value="C:\JDeveloper\mywork\JCAPs\ChunkFileRead\Input"/>
      <property name="FileName" value="overwriteme.txt"/>
      <property name="ChunkSize" value="55"/>
    </interaction-spec>
</endpoint-interaction>
</adapter-config>
Error:
Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'SynchRead' failed due to: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "Could not instantiate InteractionSpec oracle.tip.adapter.file.outbound.FileIoInteractionSpec due to: Cannot set JCA WSDL Property. Error while setting JCA WSDL Property. Property setChunkSize is not defined for oracle.tip.adapter.file.outbound.FileIoInteractionSpec Please verify the spelling of the property. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
Please suggest a resolution to this. I am using Jdeveloper 11.1.1.7.0

Thank Daniel for the reply.
But what is the impact user messaging service has here. Can it happen that my oracle.tip.adapter.file.outbound.FileIoInteractionSpec is corrupted?
Thanks
Santanu

Error in File Adapter: no alert generated

Hi folks,
I have a problem with monitoring our file adapters.
In one scenario we occasionally get the following error:
Fehler bei der Konvertierung des Dateiinhalts in XML an Position 0: java.lang.Exception: ERROR converting document line no. 2 according to structure 'eTSFlatDetailStructure':java.lang.Exception: ERROR in configuration / structure 'eTSFlatDetailStructure.': More elements in file csv structure than field names specified!
So I have build an alert category with me as recipient and an alert rule in Runtime Workbench with the following attributes:
- Rule active
- Alert-category as I have created above
- Bound to Message: no
- Error occures in Adapter Engine -> File Adapter
I have tested the Category... it works... but the rule does not fire any alert.
Has anyone an idea how to solve this problem?
Thanks
Greetings
Habib Sarbas

Hi,
the report generates following output:
20090507072803,7018210          0 07.05.2009    09:28:03      0AFE24F09F47460132CAD06697A18964
*Error records received from AF on host rd-srxt0_RXT_00 (sysid: RXT client: ). Try to send Alert...
20090507072803,7045260          0 07.05.2009    09:28:03      0AFE24F09F47460132CAD06697A18964
*Find rule for (From:vkeTSFlatBPM:vkeTSFlatBPM_var01_eTSSender:mi_eTSFlat_var01_out_asyn:urn:rsd-de:xi:ZRSD_XI_01:vkeTSBPM To::::)
20090507072803,7063530          0 07.05.2009    09:28:03      0AFE24F09F47460132CAD06697A18964
*No matching rule found
I also tried to specify the conditions with service, interface and namespace, but this is only possible if i switch bound to message to yes...
but the error occurs in file adapter... there is no message generated...

Minoccurance not satisfied error in file adapter, in complex native builder

hi ,
i need to read a file of format
header
data
tailer
for example
PurordPurItmPurDes
PO101Z1003refrigrator
PO102z1004washingmachine
PO103Z1003refrigrator
PO104z1005sterio
Purdate25/12/2012
while creating complex format using file adapter. i am getting following error
min occurance not satisfied.. main problem is if i kept unbounded for the data records, its showing me the while reading last record. if i specify data records with some defined value in maxoccurance . i can generated nxsd. otherwise i was popped up with min occurs not satisfied for the last record
Edited by: 947453 on Jul 23, 2012 1:25 AM

Hi,
Not sure where you when/where you getting that message but I can tell you that the wizard can help you to a certain point, for more complex translations do the best you can with the wizard and then go to edit the XSD source.
This document has plenty of samples...
http://docs.oracle.com/cd/E23943_01/integration.1111/e10231/nfb.htm#CIAHICFD
Cheers,
Vlad
Give points - it is good etiquette to reward an answerer points (5 - helpful; 10 - correct) for their post if they answer your question
https://forums.oracle.com/forums/ann.jspa?annID=330

Xml file error in file adapter

Hi Experts.
In my sceanrio i am Using File dapter. this adapter pick the Xml file.
here my client provieded sample Xml file (this Xml file don't have the Url and Xml version).
I am getting mapping error. nothing is wrong with mapping.
Client proveded.
- <MESSAGE>
<TABLENAME>ZMPSXMSGDET</TABLENAME>
<ACTION>I</ACTION>
- <RECORD>
<XMTYPE>ID</XMTYPE>
<XMID>2</XMID>
<ACCOUNTNUMBER />
<CONSUMERNAME />
<POSTCODE />
<ACTIONDATE />
<ACTIONTYPE />
<USERID />
<SENDINGPARTYTYPE />
<DELIVERYMETHOD />
<INTENDRECIPIENT />
<SUBMITDATE />
<BILLINGOPTION />
<CONTENTFORMAT>XML</CONTENTFORMAT>
<NEWSUPPLIERID />
<COMPRESSED>Y</COMPRESSED>
<NEXTINVOICEDATE />
<UPDATEDON />
<UPDATEDBY>SonicMQ</UPDATEDBY>
<RAWMSG_LEN>33366</RAWMSG_LEN>
<DATA>UEsDBBQACAAIAC6kKDoAAAAAAAAAAAAAAAArAAAAS</DATA>
</RECORD>
</MESSAGE>
I am getteting blow error message: in SXMB_MONI
*<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>*
*- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_ZMPSXMSGDET_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>Fatal Error: com.sap.engine.lib.xml.parser.Parser~</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MM_ZMPSXMSGDET_: Fatal Error: com.sap.engine.lib.xml.parser.Parser~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Edited by: srinivasreddy p on Jun 12, 2009 10:28 AM

Hi,
I am getting following error in recvier proxy.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">PARSE_APPLICATION_DATA</SAP:Code>
<SAP:P1>Request Message</SAP:P1>
<SAP:P2>CX_ST_MATCH_ELEMENT</SAP:P2>
<SAP:P3>/1SAI/TXS17E9317D0B8ACCD31C62</SAP:P3>
<SAP:P4>XML Bytepos.: 12 XML Path: MESSAGE(1) Error Text: System expected the element 'MT_ZMPSXMSGDET_RECV'</SAP:P4>
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during XML => ABAP conversion (Request Message; error ID: CX_ST_MATCH_ELEMENT; (/1SAI/TXS17E9317D0B8ACCD31C62 XML Bytepos.: 12 XML Path: MESSAGE(1) Error Text: System expected the element 'MT_ZMPSXMSGDET_RECV')) System expected the element 'MT_ZMPSXMSGDET_RECV'</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Error in File Adapter Monitoring

Hi,
I have created a Sender Communication Channel to pick the file:
The following error message is being displayed in Adapter Monitoring:
Sender Adapter v2622 for Party '', Service 'BS_TRD_PILOT_YOGS':
Configured at 2006-12-19 05:52:17 UTC
History:
- 2006-12-19 05:56:01 UTC: Retry interval started. Length: 60.000 s
- 2006-12-19 05:56:01 UTC: Error: Conversion of complete file content of 'OB10_input.xml' to XML format failed around position 0: Exception: ERROR consistency check in recordset structure validation (line no. 14: missing structure(s) before type 'E1EDK14'
- 2006-12-19 05:56:00 UTC: Processing started
- 2006-12-19 05:55:01 UTC: Error: Conversion of complete file content of 'OB10_input.xml' to XML format failed around position 0: Exception: ERROR consistency check in recordset structure validation (line no. 14: missing structure(s) before type 'E1EDK14'
- 2006-12-19 05:55:00 UTC: Processing started
Please anybody do the needful.
Thanks,
Yogi.

Hi Yogi,
Just go thru your source structure once again.Such type of errors usally come when your source structure is not proper adn also when the parameters for comm'n channel are not mentioned properly.
Usually the Content Conversion Parameters(recordset structure and recordset sequence fileds).
regards
Madhu

System Error in File scenario

Hi Everybody,
I just tried a simple file to file scenario.
File was deleted and message was seen in sxi_monitor but file is not created in receiver folder.
When checked in RWB, in Message monitoring the message got status as system failure.
Both sender and receiver adapters are shown as configured correclty.
Can anyone say how to rectify this error.
Thanks

>
newa2010 wrote:
> Hi Everybody,
>
> I just tried a simple file to file scenario.
>
> File was deleted and message was seen in sxi_monitor but file is not created in receiver folder.
>
> When checked in RWB, in Message monitoring the message got status as system failure.
>
> Both sender and receiver adapters are shown as configured correclty.
>
> Can anyone say how to rectify this error.
>
> Thanks
Try to check the auditlog in Channel Monitor for CC Receiver.

System error in File Adapter

Similar Messages

Maybe you are looking for