System error in MDT

Hi Experts,
we got Interface Proxy to JDBC. the bach ground runs in SAP every day in the night and send the data to XI, Then XI will write to database.
In SAP back ground job runs successfully and send to XI. in XI successfull in sxmb_moni also.
but the message end up with system error in adapter engine.
when i restart the message in the morning it went through successfully.
Audit log is like this:
Audit Log for Message: 72737178-bcf0-484a-8462-68c8a7e7f1b0
Time Stamp Status Description
2008-01-29 21:10:43 Success Message successfully received by messaging system. Profile: XI URL: http://sappxi:58000/MessagingSystem/receive/AFW/XI Credential (User): XIISUSER
2008-01-29 21:10:43 Success Using connection JDBC_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
2008-01-29 21:10:44 Success The message was successfully retrieved from the receive queue.
2008-01-29 21:10:44 Success Message successfully put into the queue.
2008-01-29 21:10:44 Success The message status set to DLNG.
2008-01-29 21:10:44 Success Delivering to channel: ReceiverChannel_JDBC
2008-01-29 21:10:44 Success MP: entering
2008-01-29 21:10:44 Success MP: processing local module localejbs/CallSapAdapter
2008-01-29 21:10:44 Success Receiver JDBC adapter: processing started; QoS required: ExactlyOnce
2008-01-29 21:31:22 Success JDBC adapter receiver channel ReceiverChannel_JDBC: processing started; party  , service JUSTENOUGH 
Can anyone tell me is there anything problem with network related problem.
Kind Regards,
kiran

Hi Prateek,
There is no information available in audit log. there is no page available in audit log only it contains one page only, i dont why the audit log stoping there.
any input is appreciated.
Kind Regards,
kiran

Similar Messages

  • Delete System error message in MDT automatically

    Hi Experts,
    I would like to seek your help to solve the following problem.
    I would like to know is there any ways that we can cancel the messages in MDT which falls under "System Error"automatically. For example:
    Sender:A and Receiver :B
    I only like to delete those messages with Sender A and Receiver B. Currently i am doing manually which by selecting the message and cancel them accordingly.
    Is there any ways that that automate this task?
    Please assist.
    Thanks in advance!

    this resport cancels the messages which are in sys error in IE ...i.e ones which you see in moni...
    and this report also takes care that it cancels EO messages only...
    There are other reports as well which cancel only non restartable messages on moni or who delete message in moni...
    There is no procedure to auto delete or cancel error messages on RWB...yo have to clear them manually...
    Edited by: Tarang Shah on Mar 27, 2009 7:33 AM

  • 'System Error' status at Message Monitoring( HTTP to FILE )

    I have created a scenario HTTP to FTP. I sent message to XI server using the HTTP Client.
    After sending the message I am getting the response at browser.
    Result:
    http-Status:  200 Message accepted
    Payload:
    But when I look in to the Message monitoring at RWB, I am getting the message status as
    System error. while going to the details i can see below error category.
    Error Category       MAPPING
    Error Code      EXCEPTION_DURING_EXECUTE
    (Is the password different for port 50000 and 8000)
    Please help me to solve this issue.
    Thanks in Advance,
    John

    This is the trace message that I got for this error
    <Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:46) at com.sap.aii.mappingtool.tf3.Transformer.checkParserException(Transformer.java:41) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:70) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:231) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:63) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:77) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:88) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:63) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:80) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy24.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:95) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)</Trace>
      <Trace level="1" type="T">Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_HTTP2File_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:46)</Trace>
      <Trace level="1" type="T">com.sap.aii.ibrun.server.mapping.MappingRuntimeException: Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_HTTP2File_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:46) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:72) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:77) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:88) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:63) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:80) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy24.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:95) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162) Root Cause: com.sap.aii.utilxi.misc.api.BaseRuntimeException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:46) at com.sap.aii.mappingtool.tf3.Transformer.checkParserException(Transformer.java:41) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:70) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:231) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:63) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:77) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:88) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:63) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:80) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy24.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:95) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)</Trace>

  • Getting "SYSTEM ERROR" while generating a PDF in a Workflow method.

    Dear All,
    I'm getting a "SYSTEM ERROR" when I'm calling the below function module in a Workflow BO Method.
    CALL FUNCTION wa_funcnm
       EXPORTING
         /1bcdwb/docparams  = fp_docparams
         invoice                     = invoice
       IMPORTING
         /1bcdwb/formoutput = fp_formoutput
       EXCEPTIONS
         usage_error        = 1
         system_error       = 2
         internal_error     = 3
         OTHERS             = 4.
    The aim is to generate the PDF and store it in DMS. Please let me know, if I'm going wrong somewhere. Any kind of inputs would be sincerely appreciated.
    Regards,
    Tushar.

    Hi Tushar
    You need to the following parameters when calling FM. Background WF process cannot handle dailog.
    fp_outputparams-nodialog = 'X'.
    fp_outputparams-getpdf   = 'X'.
    Refer to Thread below
    Creating Attachments to Work Items or to User Decisions in Workflows
    CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
        EXPORTING
    i_name     = l_formname
        IMPORTING
    e_funcname = l_fm_name.
    *   E_INTERFACE_TYPE           =
    fp_outputparams-nodialog = 'X'.
    fp_outputparams-getpdf   = 'X'.
      CALL FUNCTION 'FP_JOB_OPEN'
        CHANGING
    ie_outputparams = fp_outputparams
    EXCEPTIONS
    cancel          = 1
    usage_error     = 2
          system_error    = 3
    internal_error  = 4
    OTHERS          = 5.
      IF sy-subrc <> 0.
        CASE sy-subrc.
          WHEN OTHERS.
    ENDCASE. " CASE sy-subrc
      ENDIF.
    fp_docparams-langu = 'X'.
    fp_docparams-country = 'US'.
      fp_docparams-fillable = 'X'.
      CALL FUNCTION l_fm_name
        EXPORTING
    /1bcdwb/docparams  = fp_docparams
    emp_info           = fs_per_info
        IMPORTING
    /1BCDWB/FORMOUTPUT = FP_FORMOUTPUT
    EXCEPTIONS
    usage_error        = 1
          system_error       = 2
    internal_error     = 3
    OTHERS             = 4.
      IF sy-subrc <> 0.
        CASE sy-subrc.
          WHEN OTHERS.
    ENDCASE. " CASE sy-subrc
      ENDIF.                               " IF sy-subrc <> 0
      CALL FUNCTION 'FP_JOB_CLOSE'
    *   IMPORTING
    * E_RESULT             = result
       EXCEPTIONS
    usage_error          = 1
    system_error         = 2
    internal_error       = 3
    OTHERS               = 4
      IF sy-subrc <> 0.
        CASE sy-subrc.
          WHEN OTHERS.
    ENDCASE. " CASE sy-subrc
      ENDIF.                               " IF sy-subrc <> 0.
    ENDFORM.                    " GET_FUNCTION_MODULE
    *& Form  CONVERT_PDF_BINARY
    FORM CONVERT_PDF_BINARY .
      CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
        EXPORTING
    BUFFER                = FP_FORMOUTPUT-pdf
    *   APPEND_TO_TABLE       = ' '
    * IMPORTING
    * OUTPUT_LENGTH         =
        TABLES
    BINARY_TAB            = t_att_content_hex .
    ENDFORM.                    " CONVERT_PDF_BINARY
    Regards
    Sandy

  • How to fix file system error 56635 in windows 8.1

    heelo pls help me to fix this problem i cant install any on my laptop.
    file system error 56635 is showing  up wen i install my kaspersky 2015

    Hello Jay,
    The current forum is for developers. I'd suggest asking non-programming questions on the
    Office 2013 and Office 365 ProPlus - IT Pro General Discussions  forum instead.

  • System error in Funds Management update

    Dear you,
    Have anyone seen the following when updating FM from FI document:
    "System error:Funds management update (FMRI, CHECK_WE_RE)"
    Any ideas what to do?
    Thanks
    Sonja

    Hi there,
    The update problem occurs both if we try to post with FB50L or if I try to make a transfer of FI postings in FM. This all happens in the new installation where we plan to use new GL and FM.
    This note you gave did not ring a bell for me
    The error message is FI057. But we have not yet found a suitable note.
    Therefore any ideas are still welcomed.

  • Adobe Bridge gives a system error

    Adobe CS4. Installed on my mac. Does not recognize Raw files and when i try to open Bridge says a system error has occured.
    Adobe Photoshop Version: 11.0
    Operating System: Mac OS 10.9.0
    Camera Raw 5.0
    Please help

    Does not recognize Raw files
    From which camera make and model?
    Supported cameras
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    Compatible Adobe applications
    http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html

  • Can not upgrade. "unexpected system error" [SOLVED]

    I seem to have trouble upgrading and synchronizing the databases. I get this output when attempting 'pacman -Syu' and 'pacman -Syy':
    :: Synchronizing package databases...
    error: failed to update testing (unexpected system error)-----------------]   0%
    error: failed to update core (unexpected system error)--------------------]   0%
    error: failed to update extra (unexpected system error)-------------------]   0%
    error: failed to update community (unexpected system error)---------------]   0%
    archlinuxfr               25.0K   60.7K/s 00:00:00 [#####################] 100%
    compiz-fusion              3.6K   26.0K/s 00:00:00 [#####################] 100%
    I have tried searching for a solution here but it seems that no one else is experiencing this issue (unless I over looked a post). I see nothing about this in the news section of the home page so it might not be a common issue.
    This is what my pacman.conf file looks like:
    # /etc/pacman.conf
    # See the pacman.conf(5) manpage for option and repository directives
    # GENERAL OPTIONS
    [options]
    # The following paths are commented out with their default values listed.
    # If you wish to use different paths, uncomment and update the paths.
    #RootDir = /
    #DBPath = /var/lib/pacman/
    #CacheDir = /var/cache/pacman/pkg/
    #LogFile = /var/log/pacman.log
    HoldPkg = pacman glibc
    # If upgrades are available for these packages they will be asked for first
    SyncFirst = pacman
    #XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
    # Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
    #IgnorePkg =
    #IgnoreGroup =
    #NoUpgrade =
    #NoExtract =
    # Misc options (all disabled by default)
    #NoPassiveFtp
    #UseSyslog
    #ShowSize
    #UseDelta
    #TotalDownload
    # REPOSITORIES
    # - can be defined here or included from another file
    # - pacman will search repositories in the order defined here
    # - local/custom mirrors can be added here or in separate files
    # - repositories listed first will take precedence when packages
    # have identical names, regardless of version number
    # - URLs will have $repo replaced by the name of the current repo
    # Repository entries are of the format:
    # [repo-name]
    # Server = ServerName
    # Include = IncludePath
    # The header [repo-name] is crucial - it must be present and
    # uncommented to enable the repo.
    # Testing is disabled by default. To enable, uncomment the following
    # two lines. You can add preferred servers immediately after the header,
    # and they will be used before the default mirrors.
    [testing]
    Include = /etc/pacman.d/mirrorlist
    [core]
    # Add your preferred servers here, they will be used first
    Include = /etc/pacman.d/mirrorlist
    [extra]
    # Add your preferred servers here, they will be used first
    Include = /etc/pacman.d/mirrorlist
    [community]
    # Add your preferred servers here, they will be used first
    Include = /etc/pacman.d/mirrorlist
    [archlinuxfr]
    Server = http://repo.archlinux.fr/i686
    [compiz-fusion]
    Server = http://compiz.dreamz-box.de/i686
    # An example of a custom package repository. See the pacman manpage for
    # tips on creating your own repositories.
    #[custom]
    #Server = file:///home/custompkgs
    Is there a log file I can check to see what happened exactly or is there something that can be done for me to sync the databases again. Any help is appreciated.
    Last edited by vytalelementz (2008-10-13 13:45:48)

    Here is my mirrorlist:
    # Arch Linux repository mirrorlist
    # North America
    # - United States
    #Server = ftp://ftp.archlinux.org/$repo/os/i686
    Server = ftp://locke.suu.edu/linux/dist/archlinux/$repo/os/i686
    Server = http://archlinux.unixheads.org/$repo/os/i686
    Server = ftp://ftp.gtlib.gatech.edu/pub/linux/distributions/archlinux/$repo/os/i686
    Server = ftp://mirror.cs.vt.edu/pub/ArchLinux/$repo/os/i686
    Server = http://mirrors.easynews.com/linux/archlinux/$repo/os/i686
    Server = ftp://ftp.ibiblio.org/pub/linux/distributions/archlinux/$repo/os/i686
    Server = http://holmes.umflint.edu/archlinux/$repo/os/i686
    Server = http://mirror.neotuli.net/arch/$repo/os/i686
    Server = http://mirror.rit.edu/archlinux/$repo/os/i686
    Server = http://mirror.umoss.org/archlinux/$repo/os/i686
    Server = http://schlunix.org/archlinux/$repo/os/i686
    # - Canada
    Server = ftp://mirror.csclub.uwaterloo.ca/archlinux/$repo/os/@carch
    # South America
    # - Brazil
    Server = http://archlinux.c3sl.ufpr.br/$repo/os/i686
    Server = ftp://archlinux.c3sl.ufpr.br/archlinux/$repo/os/i686
    Server = ftp://ftp.las.ic.unicamp.br/pub/archlinux/$repo/os/i686
    # Europe
    # - Austria
    Server = ftp://gd.tuwien.ac.at/opsys/linux/archlinux/$repo/os/i686
    # - Belgium
    Server = ftp://ftp.belnet.be/mirror/archlinux.org/$repo/os/i686
    # - Czech Republic
    Server = ftp://ftp.sh.cvut.cz/MIRRORS/arch/$repo/os/i686
    # - Estonia
    Server = ftp://ftp.estpak.ee/pub/archlinux/$repo/os/i686
    # - France
    Server = ftp://mir1.archlinuxfr.org/archlinux/$repo/os/i686
    Server = ftp://mir2.archlinuxfr.org/archlinux/$repo/os/i686
    Server = ftp://distrib-coffee.ipsl.jussieu.fr/pub/linux/archlinux/$repo/os/i686
    Server = http://mir.archlinux.fr/$repo/os/i686
    Server = ftp://ftp.free.fr/mirrors/ftp.archlinux.org/$repo/os/i686
    Server = ftp://ftp.rez-gif.supelec.fr/Linux/archlinux/$repo/os/i686
    # - Germany
    Server = ftp://ftp.hosteurope.de/mirror/ftp.archlinux.org/$repo/os/i686
    Server = ftp://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/i686
    Server = ftp://ftp.uni-bayreuth.de/pub/linux/archlinux/$repo/os/i686
    Server = ftp://ftp.archlinuxppc.org/i686/$repo/os/i686
    Server = ftp://ftp.tu-chemnitz.de/pub/linux/archlinux/$repo/os/i686
    Server = http://ftp.uni-kl.de/pub/linux/archlinux/$repo/os/i686
    # - Great Britain
    Server = http://www.mirrorservice.org/sites/ftp.archlinux.org/$repo/os/i686
    Server = ftp://mirrors.uk2.net/pub/archlinux/$repo/os/i686
    Server = http://archlinux.mirrors.uk2.net/$repo/os/i686
    # - Greece
    Server = ftp://ftp.ntua.gr/pub/linux/archlinux/$repo/os/i686
    # - Hungary
    Server = ftp://ftp.mfa.kfki.hu/pub/mirrors/ftp.archlinux.org/$repo/os/i686
    # - Ireland
    Server = ftp://ftp.heanet.ie/mirrors/ftp.archlinux.org/$repo/os/i686
    # - Italy
    Server = ftp://mi.mirror.garr.it/mirrors/archlinux/$repo/os/i686
    # - Netherlands
    Server = ftp://ftp.nluug.nl/pub/metalab/distributions/archlinux/$repo/os/i686
    Server = ftp://ftp.surfnet.nl/pub/os/Linux/distr/archlinux/$repo/os/i686
    # - Norway
    Server = http://arch.likbilen.com/$repo/os/@carch
    # - Poland
    Server = ftp://mirror.icis.pcz.pl/archlinux/$repo/os/i686
    Server = http://piotrkosoft.net/pub/mirrors/ftp.archlinux.org/$repo/os/i686
    Server = ftp://ftp.piotrkosoft.net/pub/mirrors/ftp.archlinux.org/$repo/os/i686
    Server = http://unix.net.pl/archlinux.org/$repo/os/i686
    # - Portugal
    Server = ftp://cesium.di.uminho.pt/pub/archlinux/$repo/os/i686
    # - Romania
    Server = ftp://ftp.iasi.roedu.net/mirrors/archlinux.org/$repo/os/i686
    # - Russia
    Server = ftp://mirror.yandex.ru/archlinux/$repo/os/i686
    Server = http://archlinux.freeside.ru/$repo/os/i686
    # - Sweden
    Server = ftp://ftp.ds.hj.se/pub/os/linux/archlinux/$repo/os/i686
    Server = ftp://ftp.gigabit.nu/$repo/os/i686
    # - Switzerland
    Server = http://archlinux.puzzle.ch/$repo/os/i686
    # - Turkey
    Server = http://server.elsistech.com/archlinux/$repo/os/i686
    # - Ukraine
    Server = ftp://hell.org.ua/archlinux/$repo/os/i686
    Server = ftp://ftp.linux.kiev.ua/pub/Linux/ArchLinux/$repo/os/i686
    # Asia
    # - Israel
    Server = http://mirror.isoc.org.il/pub/archlinux/$repo/os/i686
    # - Vietnam
    # Domain name is ftp.indochinalinux.com but there are frequent DNS problems
    Server = ftp://202.78.230.5/archlinux/$repo/os/i686
    # Australia
    Server = ftp://mirror.pacific.net.au/linux/archlinux/$repo/os/i686
    Server = ftp://mirror.aarnet.edu.au/pub/archlinux/$repo/os/i686

  • PI 7.11 - How to create a System Error in SXMB_MONI using a Java Mapping

    Hi
    We ve go a  Java Mapping in a File-to-HTTP Scenario. It works perfect except of one error case: if an empty source file or a source file with the wrong structure is delivered. In this case our Java Mapping forwards an empty payload to the HTTP channel. So, for PI is the mapping successful.
    I'd like to recognize this case and invoke a system error in the SXMB_MONI, so that this mapping will be stopped and our alerting concept informs the users. I know, how to recognize the case in Java but need to know how to create the System Error Status in the PI System.
    Thanks in advance
    Michael

    Hi Michael,
    Please refer here for the mapping API description:
    http://help.sap.com/javadocs/NW04S/SPS09/pi/com/sap/aii/mapping/api/package-summary.html
    You can use the StreamTransformationException exception describet there to raise an error from your Java mapping. Direct link:
    http://help.sap.com/javadocs/NW04S/SPS09/pi/com/sap/aii/mapping/api/StreamTransformationException.html
    You might also consider using the "Empty-File Handling" option in sender file CC to avoid processing empty files by PI.
    Hope this helps,
    Greg

  • FI Archiving - System error: Customer/vendor line item not on OI basis

    While archiving FI Documetns using object FI_Documnt, I am getting message System error: Customer/vendor line item not on OI basis for few non archivable documents. Is it like these also open items and can not be able to archive them. Or what is the root cause of these error message.
    Regards,
    Shailesh

    Hi Adisha,
    This error pertains to the accounting fundamentals and SAP does not have anything to do with this....you ask yourself that if you were not using SAP and simlar problem came your way what would you have done...this has no solution...
    Either you wait for the next invoice with big amount but which seems bit impractical..
    In this we really need to consult the Accounting Standards to see what it could allow.
    Regards,
    Chintan Joshi

  • TS4123 A recent download of an iTines update - for whatever reason - failed on my computer.  Since then I get a system error statement telling me that the program cannot open because 'MSVCR80.d11' is missing from my computer.  When I attempt to open iTune

    A recent download of an iTunes update, for some unknown reason, failed on my computer.   Since then I get a system error message everytime I log on telling me that the program cannot be opened because 'MSVCR80.d11' is missing from my computer.   When I try to open iTunes I get an 'error 7 (Windows error 126)' message and am advised to reinstall iTunes.   However, when I attempt to do this, it downloads the programme and gets as far as installation, at which point I get yet another message: this time 'Service Apple Mobile Device failed to start'.
    I am at a loss to know what to try next and would appreciate any assistance.  I'm also concerned that, in the process of reinstalling iTunes, I am going to lose all the music I have collected over the years.

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99602)

  • Abort system error in program CL_RSDM_READ_MASTER_DATA and form_sidval_dire

    HI All,
    The following error is thrown when I execute the query.
    abort system error in program CL_RSDM_READ_MASTER_DATA and form_sidval_direct_
    However, earlier today, I ran this query successfully several times.This Query is on a multiprovider.
    Appreciate your help in advance.
    Regards,
    Harika

    Dear Harika,
    Try to repair at RSRV and check.
    Check: Re: SID error for characteristic
    Srini

  • System Error 998 While loading the Labview Run-Time Engine

    Hello.
    I have a DLL made with LV 7.1 I run the dll using a C compiler and works great in WINXP, but cannot run in Win2K. Error is:
    "System error 998 while loading the Labview Run-Time Engin(c:\program
    files\National Instruments\Shared\Labview Run-Time\7.1\\lvrt.dll)
    READVOLTAGE requires a version 7.1 (or compatible) Labview Runtime
    Engine. Please contact the vendor of READVOLTAGE to correct this
    problem"
    READVOLTAGE is my function inside the dll. The runtime is already
    installed. I tried it in another WINXP running machine and works fine.

    This is actually a Microsoft bug with statically loaded DLLs. There are a couple of workarounds for it, and I have included two links below to posts that address this issue:
    Not found error message from LabVIEW runtime when called from VC++ with statically linked MFC
    I get error 998 when calling a LabVIEW buildt DLL from MSVC++
    Kind Regards,
    E. Sulzer
    Applications Engineer
    National Instruments

  • SSIS BULK INSERT unsing UNC inside of ForEach Loop Container Failed could not be opened. Operating system error code 5(Access is denied.)

    Hi,
    I am trying to figure out how to fix my problem
    Error: Could not be opened. Operating system error code 5(Access is denied.)
    Process Description:
    Target Database Server Reside on different Server in the Network
    SSIS Package runs from a Remote Server
    SSIS Package use a ForEachLoop Container to loop into a directory to do Bulk Insert
    SSIS Package use variables to specified the share location of the files using UNC like this
    \\server\files
    Database Service accounts under the Database is runing it has full permission on the share drive were the files reside.
    In the Execution Results tab shows the prepare SQL statement for the BULK insert and I can run the same exact the bulk insert in SSMS without errors, from the Database Server and from the server were SSIS package is executed.
    I am on a dead end and I don’t want to re-write SSIS to use Data Flow Task because is not flexible to update when metadata of the table changed.
    Below post it has almost the same situation:
    https://social.msdn.microsoft.com/Forums/sqlserver/en-US/8de13e74-709a-43a5-8be2-034b764ca44f/problem-with-bulk-insert-task-in-foreach-loop?forum=sqlintegrationservices

    Insteresting how I fixed the issue, Adding the Application Name into the SQL OLAP Connection String Fixed the issue. I am not sure why SQL Server wasn't able to open the file remotely without this.

  • SSRS 2005 report: Cannot bulk load Operating system error code 5(Access is denied.)

    I built a SSRS 2005 report, which calls a stored proc on SQL Server 2005. The proc contains following code:
    CREATE TABLE #promo (promo VARCHAR(1000))
    BULK
    INSERT #promo
    FROM '\\aseposretail\c$\nz\promo_names.txt'
    WITH
    --FIELDTERMINATOR = '',
    ROWTERMINATOR = '\n'
    SELECT * from #promo
    It's ok when I manually execute the proc in SSMS.
    When I try to run the report from BIDS I got following error:
    *Cannot bulk load because the file "\aseposretail\c$\nz\promo_names.txt" could not be opened. Operating system error code 5(Access is denied.).*
    Note: I have gooled a bit and see many questions on this but they are not relevant because I CAN run the code no problem in SSMS. It's the SSRS having the issue. I know little about the security of SSRS.

    I'm having the same type of issue.  I can bulk load the same file into the same table on the same server using the same login on one workstation, but not on another.  I get this error:
    Msg 4861, Level 16, State 1, Line 1
    Cannot bulk load because the file "\\xxx\abc.txt" could not be opened. Operating system error code 5(Access is denied.).
    I've checked SQL client versions and they are the same, I've also set the client connection to TCP/IP only in the SQL Server Configuration Manager.  Still this one workstation is getting the error.  Since the same login is being used on both workstations and it works on one  but not the other, the issue is not a permissions issue.  I can also have another user login into the bad workstation and have the bulk load fail, but when they log into their regular workstation it works fine.  Any ideas on what the client configuration issue is?  These are the version numbers for Management Studio:
    Microsoft SQL Server Management Studio 9.00.3042.00
    Microsoft Analysis Services Client Tools 2005.090.3042.00
    Microsoft Data Access Components (MDAC) 2000.085.1132.00 (xpsp.080413-0852)
    Microsoft MSXML 2.6 3.0 5.0 6.0
    Microsoft Internet Explorer 6.0.2900.5512
    Microsoft .NET Framework 2.0.50727.1433
    Operating System 5.1.2600
    Thanks,
    MWise

Maybe you are looking for