System Error in Message Monitoring while it shows checked flag in SXMB_MONI

Hia,
We are working on ABAP Proxy --> SAP PI 7.1 --> SOAP (Asynchronous Scenario).
(ECC -> PI -> Legacy CRM)
I have following queries:
1. While sending messge across to Legacy system, we can see CHECKED flag in SXMB_MONI but there is System Error in Message Monitoring. When checked legacy system is unable to receive any message. Cannot understand the issue.
2. Is there any way to check in PI system whether the message has reached Legacy System other than making scneario synchronous?
Regards

System is getting connected and able to send asynchronous messages to legacy system. But getting following error while sending synchronous error:
2010-05-10 13:15:05     Information     Delivering to channel: CC_SOAP_SOReject_Out
2010-05-10 13:15:05     Information     SOAP: request message entering the adapter with user J2EE_GUEST
2010-05-10 13:15:05     Information     SOAP: completed the processing
2010-05-10 13:15:05     Information     SOAP: continuing to response message f33caa90-5c07-11df-c659-96d147c2ff0f
2010-05-10 13:15:05     Error     SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.
2010-05-10 13:15:05     Error     Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.
2010-05-10 13:15:05     Error     Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.. Setting message to status failed.
2010-05-10 13:15:06     Error     The message status was set to FAIL.
I have already checked Data Structure and it is fine.
Regards
In this scenarios we are using XSLT mapping using CDATA.
Please suggest solution.

Similar Messages

  • System Error in Message Monitoring -Proxy to SOAP async scenario

    Hi All,
    My scenario is ABAP Proxy---> SAP PI 7.1 ---> WEbService(Asynchronous SOAP ).
    In Moni message is showing successful Flag, but message has got stuck in "system Error" at message monitoring.I can't see any Audit log in Message monitoring .
    but in related Soap Receiver communication channel i can see the below Error 
    "2010-08-11 09:54:15 Error SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005.
    2010-08-11 09:54:15 Information SOAP: sending a delivery error ack ...
    2010-08-11 09:54:15 Information SOAP: sent a delivery error ack
    2010-08-11 09:54:15 Error Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005.
    2010-08-11 09:54:15 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005. "
    Please help , what could be the problem.
    Thanks in Advance.
    Jyoti

    Hi Jyoti,
    >Is there any specific setup required at Provide side while moving to Acceptance system
    I dont think so.
    Please compare EXACTLY the settings of the two Comunication Channels, especially the server path. Please assure that you ve sent exactly the same message content from Acceptance system.
    Regards,
    Udo

  • Error in message monitoring while creating new record in R/3

    Hi All,
    I am getting the following error in message monitoring while creating a new record from SAP Mobile client.
    Service name: Validation_Service
    Message: BackendKeys are not filled in table HEADER returned by getDetails
    I am passing some random number from Client to SAP R/3 create function module.
    When i pass the same value in create FM as in message monitoring. I am able to create the record successfully,
    Corresponding to newly created record, i can see the data in getdetail header also.
    Not sure why this error is coming.
    Appreciate your help!!
    Thanks & Regards
    Devendra

    The CREATE FM should not only create the entry, it should also EXPORT the key that it uses to create the entry. Is it doing that?
    i.e. the CREATE signature is usually something like:
    CREATE_BLAH
      IMPORTING header TYPE header_row
      EXPORTING key type header_row-key_field.
    So the 'key' here should be filled by the FM and returned to DOE.

  • System error in message monitoring

    Hello,
    Scenario is proxy to database. Status seems to sytem error in message monitoring. Error detail is  In audit log of message details as belows:
    JDBC Message processing failed, due to Error processing request in sax parser: Error when executing statement for table/stored proc. 'If_test ' (structure 'STATEMENT'): java.sql.SQLException: ORA-00936: missing expression 
    I should resent this message content. When i press Resend tab  in message monitoring, error status is not being changed.
    Thanks in advance

    Hi,
    Check the payload received is correct or not in this case ...
    Take payload and check at mapping level...
    if you are using insert or update statement you can enable log at the receiver jdbc channel in advance mode(logSQLStaement to true) to see how the statement is getting framed ...
    HTH
    Rajesh

  • Wrong port in FTP receiver adapter - no errors in message monitoring?

    Hello all
    We're on XI 3.0 SP16 and have created / configured a HTTP XML -> XI -> FTP Server scenario. In the receiver comm. channel (ftp) we had specified a wrong port number and always wondered, why we never got errors in message monitoring. Everything seemed to be processed correctly... but no file arrived on the FTP server (receiver) side!
    After correcting the wrong FTP port number in the receiver FTP comm. channel everything went fine.
    We now encountered a similar problem with a RFC receiver adapter. We're using it in another scenario HTTP XML -> XI -> RFC to SAP R/3 (4.7).
    For some reason it died (red status in adapter monitor) and it was no more possible to do RFC calls from XI to SAP R/3 (normal RFC adapter, NO proxies).
    In XI message monitor everything seemed to be ok but no message arrived till SAP R/3. Nothing in any queue...
    After deactivating and reactivation the RFC receiver comm. channel it worked again BUT ALL PREVIOUSLY SENT messages seem to be lost.
    Is it really the way it works? Does XI integration engine at runtime NOT catch whether or not a RFC or FTP receiver adapter died, thus is not able to tell somewhere in message monitor that a message could not be delivered at all?
    I'm really confused here but hopefully I simply don't understand some easy principles to take into account...
    Our SAP R/3 is on rel. 4.70 with Web AS 6.20. The XI 3.0 plugin is not installed. Do we need to go with server proxies there and use QOS = best effort?!?
    Thanks for some suggestions.
    Best regards,
    Renaud

    Hi Michal
    Thanks... works great for normal XML based messages!
    Now, what if I wanted to pass binary files from one ftp server via BPM to another ftp server in order to enable the transport acknowledgment?
    The files polled from ftp server using the ftp sender adapter are all in binary format (ARJ). No xml data in there. How should the message format look like in BPM for the receiving step? Or: how to make sure not to loose the binary content when passing through BPMs?
    I need this sort of scenario because of the tansport acknowledgment and because I need to have some sort of message splitting (send the binary file over to a second ftp server and additionally send some kind of info message to SAP R/3 regarding thin binary file).
    BTW: in the MessagingSystem/monitor/monitor.jsp I do not see sender / receiver information. Is this normal? It's quite of a bad thing to look inside each message in order to find out what message I'm having in front of me...
    Thanks a lot for your support and patience!
    Kind regards,
    Renaud

  • "Error in message monitoring in runtime workbench"

    Hello All,
        I have an error in message monitoring in runtime workbench.
    We have installed PI7.0 and it should run on port 50000.But it is running on port 50100.
    Please suggest what are the steps involved to resolve this problem.
    Thanks and Regards
    SAN
    null
    k san

    San,
    Can you please copy / paste error message.
    Also check if you have set correct port in Exchange profile under Runtimeworkbench.
    Nilesh

  • System Error During Message Mapping

    I've set up a simple mapping scenario that sends a DEBMAS06 IDoc from our R/3 system to XI mapping to DEBMAS06 and writing out to a file.  I am getting the following system error during message mapping:
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="MAPPING">JCO_SYSTEM_FAILURE</SAP:Code>
      <SAP:P1>Server repository could not create function template for 'SMPP_CALL_JAVA_RUNTIME</SAP:P1>
    I have gone back to the Design Builder and tested out the message mapping and the interface mapping and both work successfully.  I have also taken the payload of the message and submitted it via the RWB and it generates the same error as when sent from R/3.  Any other places I can look?

    Hi Mike,
    You have got the connectivity issue problem between ABAP and J2EE stack. When do the test in the Message Mapping, thats the J2EE and it works. But during the runtime it has to go to the Integratin Server, which is the ABAP stack. Fix the connectivity issue, check the smicm,trace and debug log etc.
    Hope this helps.
    Cheers,
    Ranjan

  • TS3694 i am getting system error no. 1015 while restoring the I phone

    i am getting system error no. 1015 while restoring the I phone

    Sounds like you're trying to downgrade the OS. tsk tsk tsk...
    http://support.apple.com/kb/TS3694#error1015
    Or it is probably jailbroken.

  • Error  in Message Monitoring in XI.

    Hi All
    Affter clicking  Message Monitoring  in RWB there is DETAIL button above the message listed when i am trying to click on the detail button it shows the error like "The page cannot be displayed".
    pls help me .
    Thaking you in advance.

    Hi Hiren,
         Plz check below mentioned blog. It will help you out:
    <a href="/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi:///people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
    Regards,
    Subhasha

  • Error in Message Monitoring

    Hello,
    When I enter to "Runtime Workbench" -> Message Monitoring, I choose:
    is.<instance_number>.<server_name> and press "display" button, then I get an error:
      "Unknown error: javax.ejb.CreateException: getJCOCLient
      (String,String)"
    When I choose af.<sid>.<server_name> in the combo box, the problem doesn't exists.
    Please Advice,
    Dimitry Haritonov

    Hello,
    Finally I solved the problem. Somehow adding parameter:
    -Duser.language=en
    solved the problem.
    instruction (note 768457):
    ==========================
    "...Enter config tool,drill down to Instance_[ID] -> server_[ID] and add the parameter on the right side in the section 'Java parameters'"
    After adding parameter, I stopped and started XI. Then the problem disappeared.
    Good luck,
    Dimitry

  • Runtime Error-Description of Exception in Moni with Checked Flag

    Hi Floks,
    I am working on one interface ABAP proxy to File.While Executing the interface i am getting checked Flag in the Moni but when i double clicked on it.Its Displaying an error message.The error message is displaying like *Runtime Error-Description of Exception*
    *Under that the Short text is The Current application Triggered a termination with a Short Dump*.But I am getting the proper Out put.
    Please do needfull help on this.
    Regards,
    sai

    Hi,
    In error analysis iam getting this can u
    Error analysis
        Short text of error message:
        Control Framework : Error processing control
        Long text of error message:
         Diagnosis
             An error occurred when the system tried to process the comma
             from the Automation Queue on the presentation server.
             There are several possible reasons for this:
             - The installation of the SAP GUI on the presentation server
             faulty or obsolete.
             - There is an error in the application program
             - There is an error in the SAPGUI or an integrated control
         Procedure
             1. Make sure that you have imported the appropriate Support
             Package, the current kernel, and GUI patch for the release o
             system
             2. Check whether the error occurs locally on one or a few PC
             generally on all PCs. Note whether the error only occurs for
             users, for example because of a specific Customizing setting
             If it only occurs locally, this suggests an installation pro
             with the PC. Check the installation; if necessary, reinstall
             software. In the dump, search for the SY-MSGLI field, since
             point to the cause of the error.
             3. Activate the Automation Trace (in accordance with SAP Not
             158985).
             4.Start the transaction and continue until the screen immedi
             before the dump.
             5. From the System -> Utilities menu, choose Autom. Queue,
                      Synchronous Processing.
             The status bar of the GUI displays the text:
                "Automation synchron flush mode on"
             6. If you now proceed with the application, the short dump will
             display the ABAP call that caused the error; the Automation Trace
             will contain the error on the presentation server.
             7. If necessary, load the short dump and trace files on to
             sapservX, so that SAP can analyze them.
        Technical information about the message:
        Message class....... "CNDP"
        Number.............. 006
        Variable 1.......... " "
        Variable 2.......... " "
        Variable 3.......... " "
        Variable 4.......... " "
    this message i am getting so can u plazzzzz

  • Getting Error ATP message log while availability check for document

    Dear Experts,
    Would you kindly help me to rectify the below problem which i am getting while avaialblity check for the sales docuemnt in ECC.
    Message : TM scheduling : Error while calling service: Internal.client-Receive_Failed
                    Error while receiving by HTTP( error code 400, error text)
                    ICM_HTTP_CONNECTION _FAILED
    Best reagrds,
    Guatam

    Hi
    Yes as Eltan says you need to consider there are two blocks of abap program:
    - the first one is the driver program (but it seems there's no problem here because it called the smartform quickly)
    - the second one is inside the smartform (It's possible to write abap routine in the smartform), and it seems the problem could be here
    The variable c_form_name has the name of the smartform, you can manage it by transaction SMARTFORMS
    but now it's not possible to say you why the print takes too long time, you need to do a trace
    Max

  • System error at PCUI Lead, while entering Partner.

    Hi Gurus,
    While working on Leads in PCUI after entring Specific partner at Header level the below mesage appears "More complex error messages determined for this document" , i m not able to understand the reason for this error, is this because of GUI or Portal authorisation to user (i tried with SAP ALL also)
    Or the PCUI iview which i m using is customized iview for lead, i m missing any step as this error only comes at PCUI.
    please resolve
    Regards,
    Dipesh.

    Hi Dipesh,
    Please let us know the solution, so that we get an idea about that too, and can use for future reference.
    Regards,
    Nrisimhanadh Yandamuri

  • Error "Video System Error: Unknown message: bindSuccss" when trying to play a movie in LR 5.3

    Hi,
    I'm getting the error listed in the title of this thread when I try to play a video.  any ideas?
    Dan

    I have to say Im a little confused to. Following the steps outlined:
    Desaturate in LR.
    Export as a JPG (add to this catalog selected- for reimport)
    Select image. Switch to Print Module
    Print file.
    No problems as expected. I dont see that there is any seting to adjust that will clear this issue.
    Q. Is it consistent with every BW file or just some?
    Aside from changing your workflow so as not to produce jpgs at all in favor of a Lightroom gallery for showing your clients the images, based on the info I have I cannot replicate the problem. So I will try first an optimization of the catalog.
    Prefernces > General > Go to Catalog Settings > General > Relaunch and Optimize.

  • Error in distribution monitor while starting export

    Dear All,
    We have successfully finished the preparation of distribution monitor.
    when we are stating export with distribution monitor it gives following error
    ERROR: 2011-08-26 13:38:49 com.sap.inst.distmon.ExportTask run
    Step 'export' failed.
    Reason: 'java.lang.NullPointerException'.
    ERROR: 2011-08-26 13:38:49 com.sap.inst.distmon.ExportTask run
    Call stack:
    com.sap.inst.distmon.ExportTask.checkOrderBy(Unknown Source)
    com.sap.inst.distmon.ExportTask.run(Unknown Source)
    com.sap.inst.distmon.SignalFileListener.run(Unknown Source)
    java.util.TimerThread.mainLoop(Unknown Source)
    java.util.TimerThread.run(Unknown Source)
    ERROR: 2011-08-26 13:38:49 com.sap.inst.distmon.ExportTask export -> checkDirStructure
    Distribution Monitor stopped in operation:
    export -> checkDirStructure
    1 errors and 0 warnings occured
    Please check: distribution_monitor_export.log
    Please suggest us.
    Thanks & Regards,
    Arti

    What about this hint:
    Please check: distribution_monitor_export.log

Maybe you are looking for