System error in routine FI_TAX_CHK_PRICING_DATA error code 13

hi
i m new in sap.when i try posting in gl i got the following error messege
system error in routine FI_TAX_CHK_PRICING_DATA error code 13 function builder tax2
can some one help me out

go to ox02 company code and mention your country.just go to company code data and put ur county there.

Similar Messages

  • System error in routine FI_TAX_CHK_PRICING_DATA error code 13 function buil

    Hi I am posting an entry to a gl account and i got an error like
    System error in routine FI_TAX_CHK_PRICING_DATA error code 13 function builder TAX2
    Message no. FF769
    I went to assign tax jurisdiction code in OBBG and assigned "TAXIN"  to country india but still got the same error...can any one plese help me out in this

    Hi,
    Please check in OBY6, that your company code is having a country.
    If not, then you need to check program LTAX2F01 (FORM DETERMINE_KALSM_FROM_BUKRS) in debug mode with your ABAPer help.
    Regards,
    Gaurav

  • System error in routine FI_TAX_GET_TXJCD_LEVELS error code 2 function build

    I am getting error "System error in routine FI_TAX_GET_TXJCD_LEVELS error code 2 function build" when I am doing release to accounting throught VF02 this error I am getting.Out client is USA client.TAX is picking up from the Veterx interface.Can anybody help regarding this.I checked the Tax prodeuure and also the tax classification everything is assigned properly.

    Good Evening,
    The reason why you are getting an error when passing the document to
    accounting is because your ship-to partner does not have a jurisdiction
    code. The error is correctly triggered since the jurisdiction code is
    required when shipping to a jurisdictional country. You can't
    post this transaction without a jurisdiction code.
    If you maintain a tax jurisdiction code on the customer master,
    cancel the invoice and rebill, the document should pass to accounting.
    The tax jurisdiction code is maintained on the address data screen.
    Please check if there is a jurisdiction code maintained in
    the customer master data. If that is not the case, check, if the
    tax pricing procedure for the country of the customer is set relevant
    for jurisdiction code. If the country of the customer is relevant
    (entry for pricing procedure) and the customer master has no jur. code
    maintained, the error tells exactly that situation. Then, either the co
    should be set to not relevant for TXJCD or the customer should get
    that customising entry.
    Please be aware that if shipping from the US to a non juristiction
    country the system should take a dummy jurisdiction code from the OBCL
    transaction.
    If you have access to OSS notes then please see:
    400766 Changes in accounting interface for Rel
    112609 How are tax codes transferred to condit
    I hope this helps!
    Kind Regards,
    Martina McElwain
    SD Forum Moderator

  • System error in routine FI_TAX_GET_TXJCD_LEVELS

    On trying to create the accounting document from Billing document( the ship to company is in Canada, we use SAP for taxes in Canada), I get strange error:
    We are in 4.6c. I checked for OSS notes. There is nothing for version 4.6c ,hiowever there is OSS notes for other versions of SAP.
    Error Message:
    System error in routine FI_TAX_GET_TXJCD_LEVELS error code 2 function builder TAX2
    Message no. FF769
    Diagnosis
    A serious program error has occurred.
    System Response
    The current processing step cannot be carried out.
    Procedure
    If the program error occurred
    · In a standard SAP program, then create an OSS message
    · In a program you wrote yourself, then correct the program.
    Has anyone seen this before?
    Please reply at the earliest.
    Thanks.

    Hi MN
    When you generate invoice that time your ship to party may not have jurisdiction code in the customer master record. So after maintain the Jurisdiction code cancel the invoice and regenerate invoice then your problem will be solved.
    Regards
    Arun

  • Syntax error in routine

    Hi Gurus,
        I have added new fields in ODS  and Cube.While activating transformation I am getting the following error : 'Start routine:Syntax error in routine'Please let me know how to trouble shoot the same.
    Regards
    Hasini

    Hi Pallavi,
    Pls gothroug the Routine:
    MONITOR_RECNO.
    Runtime attributs
        SOURCE_SYSTEM  = p_r_request->get_logsys( ).
    Migrated update rule call
      Perform routine_9998
      TABLES
        SOURCE_PACKAGE
      CHANGING
        l_abort.
    *-- Convert Messages in Transformation format
        LOOP AT MONITOR_RECNO INTO ls_monitor_recno.
          move-CORRESPONDING ls_monitor_recno to MONITOR_REC.
          append monitor_rec to MONITOR.
        ENDLOOP.
        LOOP AT MONITOR INTO ls_monitor.
          move-CORRESPONDING ls_monitor to MONITOR_REC.
          append monitor_rec to MONITOR.
        ENDLOOP.
        IF l_abort <> 0.
          RAISE EXCEPTION TYPE CX_RSROUT_ABORT.
        ENDIF.
    $$ end of routine - insert your code only before this line         -
      ENDMETHOD.                    "start_routine
          Method inverse_start_routine
    E:In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter
    SOURCE_PACKAGE" is incompatible with the formal parameter
    "DATA_PACKAGE".
    Regards
    Hasini

  • Routine's Error After Migration BW to BI

    *HI,*
    *I have migrated 2lis_13_vditm data source from bw to bi and now issue is when i try to activate transformation it is showing error*
    "RULE(TARGET 0SUBTOT_1S,GROUP 01 STANDARD GROUP): SYNTAX ERROR IN ROUTINE". ***
    " ERROR WHEN I CHECK FOR SYNTAX CONSISTENCY "* it is showing**
    *E:THE DATA OBJECT "AOMM_STRUCTURE" DOES NOT HAVE A COMPONENT CALLED*
    *"NETVAL_IN"*

    Make sure you have the latest SP for CR 2008  installed;
    https://smpdl.sap-ag.de/~sapidp/012002523100009038092009E/cr2008win_sp2.exe
    Ensure you are deploying SP 2 runtime;
    MSM
    https://smpdl.sap-ag.de/~sapidp/012002523100009159092009E/cr2008sp2_mm.zip
    MSI
    https://smpdl.sap-ag.de/~sapidp/012002523100009159002009E/cr2008sp2_redistinstall.zip
    If that does not help;
    1) Do these reports work in the designer?
    2) What database are you using and what is the connection type?
    3) Compare the dlls loading on the systems where this app works (environment which has both Crystal Reports 10 and Crystal Reports 12 in GAC) and a system that is giving you the error. Use the [Modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] utility.
    4) Open the reports in the designer and look at the properties in the Database menu -> Set Datasource Location. Check to see if there are any differences between the two reports.
    5) If there is a subreport in the report that causes the issue, remove it and see if the report works without the subreport.
    Ludek

  • System error in routin ZAV_VERBUCHUNG

    Pessoal, bom dia.
    Alguém pode me ajudar a decifrar este erro: System error in routin ZAV_VERBUCHUNG
    Tenho uma nota que esta com erro no validador... O erro esta no cadastro do cliente, extamente no Postal Code. Quando entro na VD02 e tento salvar com o codigo correto, me aparece esse erro. Nunca vi esse erro antes.
    Apenas em Produção estou com esse erro. No ambiente de teste me deixa salvar tranquilamente.
    att.
    Melissa

    Feranando, tudo bom?
    Olha a resposta da SAP:
    Dear Melissa,
    I am guessing that this routine is your own program. Please note that
    SAP do not support custom code. You should have the responsible
    developer review this routine.
    Please deactivate your modifications (including routine ZAV_VERBUCHUNG).If you are still encountering the issue please return the message with
    a reproducible example on one of your test systems.
    Thank you for your continued cooperation and understanding, it is
    greatly appreciated.
    Verifiquei com o ABAP aqui, e isso é Standard. Vamos debugar aqui mesmo e ver o que esta acontecendo...
    Obrigada mais uma vez.
    Melissa
    Edited by: Carla Bussolo on Jul 9, 2010 4:24 PM

  • I am unable to install photoshop elements13 due to an error. it shows no error code but does say - This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements.

    i am unable to install photoshop elements13 due to an error. it shows no error code but does say - This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements.

    download the 64bit installer,
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Getting Error In the Routine - While writing Code for the Cross Reference.

    Hi,
    Getting Error In the Start Routine - While writing Code for the Cross Reference from the Text table ( /BIC/TZMDES with Fields /BIC/ZMDES(Key),TXTSH ) Getting Error as [ E:Field "ZMDES" unknown ].
    Transformation : IOBJ ZPRJ3(Source) -> IOBJ ZPRJC ( Target ).
    The Source  Fields are: 0logsys(Key),zprj3(Key),ZDOM3.
    The Target Fields are : 0logsys(Key),zprjc(Key),ZDOM3, UID.
    Here i am trying to Update the target Field UID by Comparing the Source Field [ zprj3(Key)] with the Text table ( /BIC/TZMDES ) and update the UID.
    The Code is as below:
    Global Declarations in the Start Routine:
    Types: begin of itabtype,
            ZMDES type /BIC/TZMDES-/BIC/ZMDES,
            TXT type /BIC/TZMDES-TXTSH,
             end of itabtype.
    data : itab type standard table of itabtype
    with key ZMDES,
    wa_itab like line of itab.
    Routine Code :
    select * from /BIC/TZMDES into corresponding fields of table itab for
    all entries in SOURCE_PACKAGE
    where ZMDES = SOURCE_PACKAGE-/BIC/ZPRJ3.
    READ TABLE itab INTO wa_itab
    WITH KEY ZMDES = SOURCE_PACKAGE-/BIC/ZPRJ3
    BINARY SEARCH.
    IF SY-SUBRC = 0.
    RESULT = wa_itab.
    CLEAR wa_itab.
    The tys_SC_1 structure is :
    BEGIN OF tys_SC_1,
         InfoObject: 0LOGSYS.
            LOGSYS           TYPE RSDLOGSYS,
         InfoObject: ZPRJ3.
            /BIC/ZPRJ3           TYPE /BIC/OIZPRJ3,
         InfoObject: ZDOM3.
            /BIC/ZDOM3           TYPE /BIC/OIZDOM3,
         Field: RECORD.
            RECORD           TYPE RSARECORD,
          END   OF tys_SC_1.
        TYPES:
          tyt_SC_1        TYPE STANDARD TABLE OF tys_SC_1
                            WITH NON-UNIQUE DEFAULT KEY.
    Please suggest with your valuable inputs.
    Thanks in Advance

    I have split the code in two.. one for start routine.. other for field routine.. hope this helps
    Types: begin of itabtype,
    ZMDES type /BIC/TZMDES-/BIC/ZMDES,
    TXT type /BIC/TZMDES-TXTSH,
    end of itabtype.
    data : itab type standard table of itabtype
    with key ZMDES,
    wa_itab like line of itab.
    Start routine
    select * from /BIC/TZMDES into corresponding fields of table itab for
    all entries in SOURCE_PACKAGE
    where ZMDES = SOURCE_PACKAGE-/BIC/ZPRJ3.
    Sort itab.
    field routine
    CLEAR wa_itab.
    READ TABLE itab INTO wa_itab
    WITH KEY ZMDES = SOURCE_FIELD-/BIC/ZPRJ3
    BINARY SEARCH.
    IF SY-SUBRC = 0.
    RESULT = wa_itab-<field name>

  • How does System Exec VI identify Standard Error within cmd code?

    I am using the System Exec VI to control a USB to serial adaptor program header, I have sucessfully written a .BAT file to call the CMD commands (the .exe I am running uses "-option" commands and the help file reccomends to do so) and it functions perfectly. My only issue is identifing errors. The "Standard Error Out" on the System Exec VI never outputs anything. Yes the wait until completion is TRUE and my standard output functions fine. I am curious as to how the System Exec VI  identifies errors from the command prompt and  why my errors are not showing up. I am currently using multiple match pattern string functions to identify the possible errors from my standar output for the time being but I would like to simplfy my code a bit and clean it up if at all possible. Not to mention there are most likely several other errors that could occur that I may have not identified. Some examples of stanadrd output errors i can get include include:
    {C:\Documents and Settings\owner\Desktop\RACK LINK>C:\DCRABBIT_10.66\Utilities\clRFU.exe "" -s "0":115200 -v -vp+ -usb+
    .bin not found
    C:\Documents and Settings\owner\Desktop\RACK LINK>pause
    Press any key to continue . . . }
    or
    {C:\Documents and Settings\owner\Desktop\RACK LINK>C:\DCRABBIT_10.66\Utilities\clRFU.exe "C:\Documents and Settings\owner\Desktop\RACK LINK\Calibration_v030.bin" -s "4":115200 -v -vp+ -usb+
    Rabbit Field Utility v4.62
    Installing Calibration v0.3.0
    Sending Coldloader
    Error: No Rabbit Processor Detected.
    C:\Documents and Settings\owner\Desktop\RACK LINK>pause
    Press any key to continue . . . }

    I think you should use error handling in batch programming, see this link http://www.robvanderwoude.com/errorlevel.php
    CLA 2014
    CCVID 2014

  • Activation problem: Adobe DRM Error System: 8 State: 4 Class: 65 Code: 59 Message: VE error 59

    Hi,
    I bought a book yesterday and I was able to open it in my vista machine. I have a second computer and I can't open my book there. I get this error:
    Adobe DRM Error
    System: 8
    State: 4
    Class: 65
    Code: 59
    Message:
    VE error 59
    --- end ---
    I already downloaded Adobe Digital Editions 1.5 beta 2, and went back to acrobat reader 6, activate from aractivate.adobe.com, but nothing seems to work. What can I do?

    System 7, code 31 is always a networking problem. Meaning something on your network is preventing the book information from getting to the rights-management server (or from the rights-management information getting sent back)
    You can check firewalls, security software, etc to see where the blockage might be, or work with your network admins if you have them. See 'Error "Adobe DRM Error" when you activate Digital Editions or access an eBook" at http://www.adobe.com/go/kb402747
    Regards,
    Bentley Wolfe
    Senior Support Engineer, Flash/Flash Player/Digital Editions
    Adobe

  • Com.sybase.persistence.SynchronizeException: com.ianywhere.ultralitejni12.implementation.JniException: UltraLiteJ Error[-1305]: MobiLink communication error -- code: 86, parameter: 404, system code: 0Details:

    Hi,
    I am trying to fetch data from SMP 2.3 Server through SMP 2.3 SDK. i have followed all steps which have been mentioned in SYBASE INFOCENTER for Native Android Platfom. i am getting the following error
    com.sybase.persistence.SynchronizeException: com.ianywhere.ultralitejni12.implementation.JniException: UltraLiteJ Error[-1305]: MobiLink communication error -- code: 86, parameter: 404, system code: 0Details:
    if anybody has dea about this error. please respond

    Hi viru,
    No, i am not connecting via relay server. i am connecting to organisation's  SMP Cloud Server. We used the same RFC for creating MBO for iOS application and it worked.
    This is my code:
    import java.util.Hashtable;
    import SampleTest.SampleTestDB;
    import android.app.Activity;
    import android.app.ProgressDialog;
    import android.content.Intent;
    import android.os.Bundle;
    import android.util.Log;
    import android.view.Menu;
    import android.view.View;
    import android.widget.AdapterView;
    import android.widget.AdapterView.OnItemClickListener;
    import android.widget.Button;
    import android.widget.ListView;
    import android.widget.Toast;
    import com.sybase.collections.GenericList;
    import com.sybase.collections.StringList;
    import com.sybase.collections.StringProperties;
    import com.sybase.mobile.Application;
    import com.sybase.mobile.ApplicationCallback;
    import com.sybase.mobile.ConnectionProperties;
    import com.sybase.mobile.ConnectionStatus;
    import com.sybase.mobile.RegistrationStatus;
    import com.sybase.persistence.DefaultCallbackHandler;
    import com.sybase.persistence.LoginCredentials;
    import com.sybase.persistence.SynchronizationAction;
    import com.sybase.persistence.SynchronizationContext;
    import com.sybase.persistence.SynchronizationGroup;
    import com.sybase.persistence.SynchronizationStatus;
    public class ReadActivity extends Activity {
         private static final int REQUEST_DETAIL = 99;
         private static String USERNAME = "supAdmin";
         private static String PASSWORD = "pass";
         private static String HOST = "cloudsap1.ltisap.com";
         private static int PORT = 5001;
         private static int TIMEOUT = 600;
         private EmployeeAdapter adapter;
         private static volatile boolean initializationDone = false;
      ListView ltList;
      Button btnNext;
    @Override
    protected void onCreate(Bundle savedInstanceState) {
      super.onCreate(savedInstanceState);
      setContentView(R.layout.activity_read);
      initializeApplication();
    protected void onActivityResult(int requestCode, int resultCode, Intent data)
            if (requestCode == REQUEST_DETAIL)
                if (resultCode == RESULT_OK)
                    ReadActivity.this.adapter.refreshUI(true);
       private void initializeApplication()
        final ProgressDialog dialog = new ProgressDialog(this);
        dialog.setProgressStyle(ProgressDialog.STYLE_HORIZONTAL);
        dialog.setTitle("on boarding ...");
        dialog.setMessage("Please wait while download initial data...");
        dialog.setIndeterminate(false);
        dialog.setProgress(100);
        dialog.setCancelable(true);
        dialog.show();
        new Thread()
            @Override
            public void run()
                try
                    int count = 0;
                    while (!initializationDone)
                        dialog.setProgress(++count);
                        Thread.sleep(100);
                        if (count == 100)
                            count = 0;
                    dialog.cancel();
                catch (Exception e)
                    dialog.cancel();
        }.start();
        Application app = Application.getInstance();
        app.setApplicationIdentifier("SampleTest");//== important!!!!!!!!!!!!!!!!!
        app.setApplicationContext(getApplicationContext());
        new Thread(new Runnable()
            public void run()
                try
                    Application app = Application.getInstance();
                    ApplicationCallback appCallback = new MyApplicationCallback();
                    app.setApplicationCallback(appCallback);
                    SampleTestDB.registerCallbackHandler(new CustomerDBCallback());
                    SampleTestDB.setApplication(app);
                    SampleTestDB.getSynchronizationProfile().setServerName(HOST); // Convenience only
                    ConnectionProperties connProps = app.getConnectionProperties();
                    LoginCredentials loginCredentials = new LoginCredentials(USERNAME, PASSWORD);
                    connProps.setLoginCredentials(loginCredentials);
                    connProps.setServerName(HOST);
                    connProps.setPortNumber(PORT);
                    if (app.getRegistrationStatus() != RegistrationStatus.REGISTERED)
                     try {
                      app.registerApplication(TIMEOUT);
                     catch (Exception e)
                      Log.e("Emp101","Cannot register " + e.getMessage());
                    else
                        app.startConnection(TIMEOUT);
                    Log.i("Emp101","Application REGISTERED");
                    if (!SampleTestDB.isSynchronized("default"))//
                     Log.i("Emp101","Starting Initial Sync");
                        SampleTestDB.disableChangeLog();
                        SampleTestDB.synchronize(); // AFTER  THIS STATEMENT IT IS GIVING THAT ERROR
                        SynchronizationGroup sg = SampleTestDB.getSynchronizationGroup("default");
                        sg.setEnableSIS(true);
                        sg.save();
                      //  SampleTestDB.subscribe();
                        Log.i("Emp101","Subscribe");
                        SampleTestDB.synchronize();
                        Log.i("Emp101","Initial Sync COMPLETED");
                    SampleTestDB.enableChangeLog();
                catch (Exception e)
                    e.printStackTrace();
                finally
                    initializationDone = true;
                ReadActivity.this.runOnUiThread(new Runnable()
                    public void run()
                     btnNext = (Button) findViewById(R.id.btn_create);
                        adapter = new EmployeeAdapter(ReadActivity.this);
                      ltList = (ListView) findViewById(R.id.lvRead);
                      ltList.setAdapter(adapter);
        }).start();
       // Start of ApplicationCallback
       class MyApplicationCallback implements ApplicationCallback
          public void onApplicationSettingsChanged(StringList nameList)
            Log.i("Emp101","Application Settings Changed: "+ nameList);
          public void onConnectionStatusChanged(int connectionStatus, int errorCode, String errorMessage)
                 switch (connectionStatus)
                     case ConnectionStatus.CONNECTED:
                      System.out.println("Device is Connected");
                      Log.i("ERROR1", "Device is Connected");
                         break;
                     case ConnectionStatus.CONNECTING:
                      System.out.println("Device is Connecting");
                      Log.i("ERROR2", "Device is Connecting");
                         break;
                     case ConnectionStatus.CONNECTION_ERROR:
                      System.out.println("Connection Error: " + errorMessage);
                      Log.i("ERROR3", errorMessage);
                         break;
                     case ConnectionStatus.DISCONNECTED:
                      System.out.println("Device is Disconnected");
                      Log.i("ERROR4", "Device is Disconnected");
                         break;
                     case ConnectionStatus.DISCONNECTING:
                      System.out.println("Device is Disconnecting");
                      Log.i("ERROR5", "Device is Disconnecting");
                         break;
          public void onRegistrationStatusChanged(int registrationStatus, int errorCode, String errorMessage)
                 switch (registrationStatus)
                     case RegistrationStatus.REGISTERED:
                      System.out.println("Device is REGISTERED");
                      Log.i("ERROR6", "Device is REGISTERED");
                         break;
                     case RegistrationStatus.REGISTERING:
                      System.out.println("Device is REGISTERING");
                      Log.i("ERROR7", "Device is REGISTERING");
                         break;
                     case RegistrationStatus.REGISTRATION_ERROR:
                      System.out.println("Registration Error: " + errorMessage);
                      Log.i("ERROR8", errorMessage);
                         break;
                     case RegistrationStatus.UNREGISTERED:
                      System.out.println("Device is UNREGISTERED");
                      Log.i("ERROR9", "Device is UNREGISTERED");
                         break;
                     case RegistrationStatus.UNREGISTERING:
                      System.out.println("Device is UNREGISTERING");
                      Log.i("ERROR10", "Device is UNREGISTERING");
                         break;
          public void onHttpCommunicationError(int errorCode, String errorMessage, StringProperties httpHeaders)
           System.out.println("ERROR - HTTP Communication Error: "+ errorMessage);
          public void onDeviceConditionChanged(int condition)
           System.out.println("Device Condition Status: "+ condition);
       public void onCustomizationBundleDownloadComplete(String arg0,
         int arg1, String arg2) {
        // TODO Auto-generated method stub
       public int onPushNotification(Hashtable arg0) {
        // TODO Auto-generated method stub
        return 0;
       //....End of ApplicationCallback
        private class CustomerDBCallback extends DefaultCallbackHandler
             @Override
             public int onSynchronize(GenericList<SynchronizationGroup> groups, SynchronizationContext context)
                 if (context.getStatus() == SynchronizationStatus.STARTING)
                     ReadActivity.this.runOnUiThread(new Runnable()
                         public void run()
                             Toast.makeText(ReadActivity.this, "Synchronizing ... ", Toast.LENGTH_LONG).show();
                 else if (context.getStatus() == SynchronizationStatus.FINISHING || context.getStatus() == SynchronizationStatus.ASYNC_REPLAY_UPLOADED)
                  ReadActivity.this.runOnUiThread(new Runnable()
                         public void run()
                             Toast.makeText(ReadActivity.this, "Synchronize done", Toast.LENGTH_SHORT).show();
                     if (ReadActivity.this.adapter != null)
                      ReadActivity.this.adapter.refreshUI(false);
                 return SynchronizationAction.CONTINUE;
    @Override
    public boolean onCreateOptionsMenu(Menu menu) {
      // Inflate the menu; this adds items to the action bar if it is present.
      getMenuInflater().inflate(R.menu.read, menu);
      return true;

  • Start Routine: Syntax error in routine 2LIS_03_BF Transformations

    Hi experts,
    I enhanced the 2lis_03_bf data source, and replicated the data source in bw system, i have mapped the transformations and when i try to activate the transformations it is giving the below error.
    Start Routine: Syntax error in routine
    when i check the start routine it is giving the  below error message.
    E:In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter
    "SOURCE_PACKAGE" is incompatible with the formal parameter
    "DATA_PACKAGE".
    please provide me the solution.
    Regards
    venuscm

    Hi Venu,
    This seems to me like you have earlier migrated the update rules to transformations. We did the same earlier and faced issues whenever we add new fields/infoobjects. The error message was different, if i remember correctly.
    We had to add the new field/infoobject added, to the structure '_ty_s_*****' that exists at the top of the start routine code. This was one disadvantage of migration of rules.

  • 0IC_C03: 2LIS_03_BF Transformation Start Routine Activation error

    Hi all,
    Iam getting activation error (Start Routine) while activating the transformation for the 2LIS_03_BF (Material Movements) data source for 0IC_C03 INFO CUBE. Iam getting an error for the Start Routine  and the error message is as follows:
    + E:In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter "SOURCE_PACKAGE" is incompatible with the formal parameter "DATA_PACKAGE".+
    Scenario: As per my client requirment i have tried to add on info object in to the existing info cube i.e., Movement Type which is an existing field in the info source and the data source and i have tried to map the same in the transformations between the info source and the info cube and activated the transformation. Then iam getting the above said start routine error, so to avoid this i have removed that object i.e., movement type from the info cube and tried to reactivate the transformations still iam getting the same routine error.
    Please suggest me th approach to resolve this issue.
    Regards,
    Prabhakar

    Hi Chandu,
    Please find below is the routine:
    PROGRAM trans_routine.
          CLASS routine DEFINITION
    CLASS lcl_transform DEFINITION.
      PUBLIC SECTION.
    Attributs
        DATA:
          p_check_master_data_exist
                TYPE RSODSOCHECKONLY READ-ONLY,
    *-    Instance for getting request runtime attributs;
        Available information: Refer to methods of
        interface 'if_rsbk_request_admintab_view'
          p_r_request
                TYPE REF TO if_rsbk_request_admintab_view READ-ONLY.
      PRIVATE SECTION.
        TYPE-POOLS: rsd, rstr.
      Rule specific types
        TYPES:
          BEGIN OF tys_SC_1,
         InfoObject: 0STORNO Reversal Indicator.
            STORNO           TYPE /BI0/OISTORNO,
         InfoObject: 0RT_PROMO promotion.
            RT_PROMO           TYPE /BI0/OIRT_PROMO,
         InfoObject: 0VAL_CLASS Valuation  class.
            VAL_CLASS           TYPE /BI0/OIVAL_CLASS,
         InfoObject: 0DOC_DATE Document Date.
            DOC_DATE           TYPE /BI0/OIDOC_DATE,
         InfoObject: 0STOCKTYPE StockType.
            STOCKTYPE           TYPE /BI0/OISTOCKTYPE,
         InfoObject: 0STOCKCAT Stock  Categories.
            STOCKCAT           TYPE /BI0/OISTOCKCAT,
         InfoObject: 0PSTNG_DATE Posting date in the document.
            PSTNG_DATE           TYPE /BI0/OIPSTNG_DATE,
         InfoObject: 0COMP_CODE Company Code.
            COMP_CODE           TYPE /BI0/OICOMP_CODE,
         InfoObject: 0BWAPPLNM Application component.
            BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
         InfoObject: 0MOVETYPE movement Type (Inventory Management).
            MOVETYPE           TYPE /BI0/OIMOVETYPE,
         InfoObject: 0STOCKRELEV BW: Relevance to Stock.
            STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
         InfoObject: 0CPPVLC BW: Purchase Value in Local currency.
            CPPVLC           TYPE /BI0/OICPPVLC,
         InfoObject: 0CPSVLC BW: Sales Value in Local currency.
            CPSVLC           TYPE /BI0/OICPSVLC,
         InfoObject: 0CPSTLC BW: Sales Value in Local currency.
            CPSTLC           TYPE /BI0/OICPSTLC,
         InfoObject: 0CPQUABU BW: Amount in base unit of Measure.
            CPQUABU           TYPE /BI0/OICPQUABU,
         InfoObject: 0VAL_TYPE Valuation Type.
            VAL_TYPE           TYPE /BI0/OIVAL_TYPE,
         InfoObject: 0PROCESSKEY BW: Transaction Key.
            PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
         InfoObject: 0BATCH Batch number.
            BATCH           TYPE /BI0/OIBATCH,
         InfoObject: 0MATMREA Reason for Goods Movement.
            MATMREA           TYPE /BI0/OIMATMREA,
         InfoObject: 0BUS_AREA Business Area.
            BUS_AREA           TYPE /BI0/OIBUS_AREA,
         InfoObject: 0COSTCENTER Cost Center.
            COSTCENTER           TYPE /BI0/OICOSTCENTER,
         InfoObject: 0SOLD_TO Sold-to Party.
            SOLD_TO           TYPE /BI0/OISOLD_TO,
         InfoObject: 0WHSE_NUM Warehouse Number / warehouse complex.
            WHSE_NUM           TYPE /BI0/OIWHSE_NUM,
         InfoObject: 0STOR_LOC Storage Location.
            STOR_LOC           TYPE /BI0/OISTOR_LOC,
         InfoObject: 0STRGE_BIN Storage Bin.
            STRGE_BIN           TYPE /BI0/OISTRGE_BIN,
         InfoObject: 0STRGE_TYPE Storage Type.
            STRGE_TYPE           TYPE /BI0/OISTRGE_TYPE,
         InfoObject: 0VENDOR  Vendor.
            VENDOR           TYPE /BI0/OIVENDOR,
         InfoObject: 0MATERIAL Material.
            MATERIAL           TYPE /BI0/OIMATERIAL,
         InfoObject: 0DOC_NUM BW: Document Number.
            DOC_NUM           TYPE /BI0/OIDOC_NUM,
         InfoObject: 0BASE_UOM Base Unit of Measure.
            BASE_UOM           TYPE /BI0/OIBASE_UOM,
         InfoObject: 0DOC_YEAR BW: Document Year.
            DOC_YEAR           TYPE /BI0/OIDOC_YEAR,
         InfoObject: 0PROFIT_CTR Profit center.
            PROFIT_CTR           TYPE /BI0/OIPROFIT_CTR,
         InfoObject: 0DCINDIC Debit/Credit Indicator.
            DCINDIC           TYPE /BI0/OIDCINDIC,
         InfoObject: 0LOC_CURRCY Local currency.
            LOC_CURRCY           TYPE /BI0/OILOC_CURRCY,
         InfoObject: 0PLANT Plant.
            PLANT           TYPE /BI0/OIPLANT,
         InfoObject: 0FISCVARNT Fiscal year variant.
            FISCVARNT           TYPE /BI0/OIFISCVARNT,
         InfoObject: 0CPNOITEMS BW: Number of activities.
            CPNOITEMS           TYPE /BI0/OICPNOITEMS,
         InfoObject: 0CO_AREA Controlling Area.
            CO_AREA           TYPE /BI0/OICO_AREA,
         InfoObject: 0DOC_ITEM BW: Document Line Number.
            DOC_ITEM           TYPE /BI0/OIDOC_ITEM,
         InfoObject: 0VALUE_LC Amount in local currency.
            VALUE_LC           TYPE /BI0/OIVALUE_LC,
         InfoObject: 0QUANT_B Quantity in base units of Measure.
            QUANT_B           TYPE /BI0/OIQUANT_B,
         InfoObject: 0MOVE_PLANT Receiving Plant/Issuing Plant.
            MOVE_PLANT           TYPE /BI0/OIMOVE_PLANT,
         InfoObject: 0RECORDMODE BW Delta Process: Update Mode.
            RECORDMODE           TYPE RODMUPDMOD,
         InfoObject: 0RT_RMAPIDA RMA Physical Inventory Date.
            RT_RMAPIDA           TYPE /BI0/OIRT_RMAPIDA,
         InfoObject: 0BWCOUNTER Additional Key Field Revaluation Document
    *Record.
            BWCOUNTER           TYPE /BI0/OIBWCOUNTER,
         InfoObject: 0INDSPECSTK Indicator: Valuation of Special stock.
            INDSPECSTK           TYPE /BI0/OIINDSPECSTK,
         InfoObject: 0GN_R3_SSY Source System for  R/3 Entity.
            GN_R3_SSY           TYPE /BI0/OIGN_R3_SSY,
         InfoObject: 0RT_MOVINV movement Type is Physical Inventory.
            RT_MOVINV           TYPE /BI0/OIRT_MOVINV,
         InfoObject: 0RT_MOVADJ movement Type is Stock Adjustment.
            RT_MOVADJ           TYPE /BI0/OIRT_MOVADJ,
         InfoObject: 0RSL_STMAT Structured  Article.
            RSL_STMAT           TYPE /BI0/OIRSL_STMAT,
         InfoObject: 0RT_MOVRET movement Type is Return.
            RT_MOVRET           TYPE /BI0/OIRT_MOVRET,
         InfoObject: 0RSL_STAUTO Automatically Completed Component.
            RSL_STAUTO           TYPE /BI0/OIRSL_STAUTO,
         InfoObject: 0RT_MOVTRAN movement Type is Stock Transfer.
            RT_MOVTRAN           TYPE /BI0/OIRT_MOVTRAN,
         InfoObject: 0RT_MATPOST Transfer Posting from  Article to Article
            RT_MATPOST           TYPE /BI0/OIRT_MATPOST,
         InfoObject: 0RT_SASTSV Share of Business Volume for Set Sales Val
    *ue in Local crcy.
            RT_SASTSV           TYPE /BI0/OIRT_SASTSV,
         InfoObject: 0RT_SASTST Share of Business Volume for Set with Tax
    *in Local currency.
            RT_SASTST           TYPE /BI0/OIRT_SASTST,
         InfoObject: 0COORDER order number.
            COORDER           TYPE /BI0/OICOORDER,
         InfoObject: 0RMA_LNK RMA Stock Transfer Reference Item.
            RMA_LNK           TYPE /BI0/OIRMA_LNK,
         InfoObject: 0RMA_RFLG RMA Relevance Flag.
            RMA_RFLG           TYPE /BI0/OIRMA_RFLG,
         InfoObject: 0RTHFEES Stock Transfer Fees.
            RTHFEES           TYPE /BI0/OIRTHFEES,
         Field: RECORD.
            RECORD           TYPE RSARECORD,
          END   OF tys_SC_1.
        TYPES:
    tyt_SC_1        TYPE STANDARD TABLE OF tys_SC_1
                            WITH NON-UNIQUE DEFAULT KEY.
    $$ begin of global - insert your declaration only below this line  -
    ... "insert your code here
    $$ end of global - insert your declaration only before this line   -
        METHODS
          start_routine
            IMPORTING
              request                  type rsrequest
              datapackid               type rsdatapid
            EXPORTING
              monitor                  type rstr_ty_t_monitors
            CHANGING
              SOURCE_PACKAGE              type tyt_SC_1
            RAISING
              cx_rsrout_abort.
        METHODS
          inverse_start_routine
            IMPORTING
              i_th_fields_outbound         TYPE rstran_t_field_inv
              i_r_selset_outbound          TYPE REF TO cl_rsmds_set
              i_is_main_selection          TYPE rs_bool
              i_r_selset_outbound_complete TYPE REF TO cl_rsmds_set
              i_r_universe_inbound         TYPE REF TO cl_rsmds_universe
            CHANGING
              c_th_fields_inbound          TYPE rstran_t_field_inv
              c_r_selset_inbound           TYPE REF TO cl_rsmds_set
              c_exact                      TYPE rs_bool.
    ENDCLASS.                    "routine DEFINITION
    $$ begin of 2nd part global - insert your code only below this line  *
        TYPES:
          BEGIN OF tys_SC_1_full,
         InfoObject: 0STORNO Stornokennzeichen.
            STORNO           TYPE /BI0/OISTORNO,
         InfoObject: 0RT_PROMO Aktion.
            RT_PROMO           TYPE /BI0/OIRT_PROMO,
         InfoObject: 0VAL_CLASS Bewertungsklasse.
            VAL_CLASS           TYPE /BI0/OIVAL_CLASS,
         InfoObject: 0DOC_DATE Belegdatum.
            DOC_DATE           TYPE /BI0/OIDOC_DATE,
         InfoObject: 0STOCKTYPE Bestandsausprägung.
            STOCKTYPE           TYPE /BI0/OISTOCKTYPE,
         InfoObject: 0STOCKCAT Bestandstypen.
            STOCKCAT           TYPE /BI0/OISTOCKCAT,
         InfoObject: 0PSTNG_DATE Buchungsdatum im Beleg.
            PSTNG_DATE           TYPE /BI0/OIPSTNG_DATE,
         InfoObject: 0COMP_CODE Buchungskreis.
            COMP_CODE           TYPE /BI0/OICOMP_CODE,
         InfoObject: 0BWAPPLNM Anwendungskomponente.
            BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
         InfoObject: 0MOVETYPE Bewegungsart (Bestandsführung).
            MOVETYPE           TYPE /BI0/OIMOVETYPE,
         InfoObject: 0STOCKRELEV BW: Best.Relevanz.
            STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
         InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
            CPPVLC           TYPE /BI0/OICPPVLC,
         InfoObject: 0CPSVLC BW: Verkaufswert in Hauswährung.
            CPSVLC           TYPE /BI0/OICPSVLC,
         InfoObject: 0CPSTLC BW: VerkWmS Hauswährung.
            CPSTLC           TYPE /BI0/OICPSTLC,
         InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
            CPQUABU           TYPE /BI0/OICPQUABU,
         InfoObject: 0VAL_TYPE Bewertungsart.
            VAL_TYPE           TYPE /BI0/OIVAL_TYPE,
         InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
            PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
         InfoObject: 0BATCH Chargennummer.
            BATCH           TYPE /BI0/OIBATCH,
         InfoObject: 0MATMREA Grund für die Warenbewegung.
            MATMREA           TYPE /BI0/OIMATMREA,
         InfoObject: 0BUS_AREA Geschäftsbereich.
            BUS_AREA           TYPE /BI0/OIBUS_AREA,
         InfoObject: 0COSTCENTER Kostenstelle.
            COSTCENTER           TYPE /BI0/OICOSTCENTER,
         InfoObject: 0SOLD_TO Auftraggeber.
            SOLD_TO           TYPE /BI0/OISOLD_TO,
         InfoObject: 0WHSE_NUM Lagernummer/Lagerkomplex.
            WHSE_NUM           TYPE /BI0/OIWHSE_NUM,
         InfoObject: 0STOR_LOC Lagerort.
            STOR_LOC           TYPE /BI0/OISTOR_LOC,
         InfoObject: 0STRGE_BIN Lagerplatz.
            STRGE_BIN           TYPE /BI0/OISTRGE_BIN,
         InfoObject: 0STRGE_TYPE Lagertyp.
            STRGE_TYPE           TYPE /BI0/OISTRGE_TYPE,
         InfoObject: 0VENDOR Lieferant.
            VENDOR           TYPE /BI0/OIVENDOR,
         InfoObject: 0MATERIAL Material.
            MATERIAL           TYPE /BI0/OIMATERIAL,
         InfoObject: 0DOC_NUM BW: Belegnummer.
            DOC_NUM           TYPE /BI0/OIDOC_NUM,
         InfoObject: 0BASE_UOM Basismengeneinheit.
            BASE_UOM           TYPE /BI0/OIBASE_UOM,
         InfoObject: 0DOC_YEAR BW: Belegjahr.
            DOC_YEAR           TYPE /BI0/OIDOC_YEAR,
         InfoObject: 0PROFIT_CTR Profit Center.
            PROFIT_CTR           TYPE /BI0/OIPROFIT_CTR,
         InfoObject: 0DCINDIC Soll-/Haben-Kennzeichen.
            DCINDIC           TYPE /BI0/OIDCINDIC,
         InfoObject: 0LOC_CURRCY Hauswährung.
            LOC_CURRCY           TYPE /BI0/OILOC_CURRCY,
         InfoObject: 0PLANT Werk.
            PLANT           TYPE /BI0/OIPLANT,
         InfoObject: 0FISCVARNT Geschäftsjahresvariante.
            FISCVARNT           TYPE /BI0/OIFISCVARNT,
         InfoObject: 0CPNOITEMS BW: Anzahl Vorgänge.
            CPNOITEMS           TYPE /BI0/OICPNOITEMS,
         InfoObject: 0CO_AREA Kostenrechnungskreis.
            CO_AREA           TYPE /BI0/OICO_AREA,
         InfoObject: 0DOC_ITEM BW: Belegpositionsnummer.
            DOC_ITEM           TYPE /BI0/OIDOC_ITEM,
         InfoObject: 0VALUE_LC Betrag in Hauswährung.
            VALUE_LC           TYPE /BI0/OIVALUE_LC,
         InfoObject: 0COORDER Auftragsnummer.
            COORDER           TYPE /BI0/OICOORDER,
         InfoObject: 0QUANT_B Menge in Basismengeneinheiten.
            QUANT_B           TYPE /BI0/OIQUANT_B,
         InfoObject: 0MOVE_PLANT Empfangendes/Abgebendes Werk.
            MOVE_PLANT           TYPE /BI0/OIMOVE_PLANT,
         InfoObject: 0RECORDMODE BW Deltaverfahren: Update Modus.
            RECORDMODE           TYPE RODMUPDMOD,
         InfoObject: 0RT_RMAPIDA RMA Inventurdatum.
            RT_RMAPIDA           TYPE /BI0/OIRT_RMAPIDA,
         InfoObject: 0BWCOUNTER Zusätzliches Schlüsselfeld Umbewertungsbel
    *egsatz.
            BWCOUNTER           TYPE /BI0/OIBWCOUNTER,
         InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
            INDSPECSTK           TYPE /BI0/OIINDSPECSTK,
         InfoObject: 0GN_R3_SSY Quellsystem der R/3 Entität.
            GN_R3_SSY           TYPE /BI0/OIGN_R3_SSY,
         InfoObject: 0RT_MOVINV Bewegungsart ist Inventur.
            RT_MOVINV           TYPE /BI0/OIRT_MOVINV,
         InfoObject: 0RT_MOVADJ Bewegungsart ist Bestandskorrektur.
            RT_MOVADJ           TYPE /BI0/OIRT_MOVADJ,
         InfoObject: 0RSL_STMAT Strukturierter Artikel.
            RSL_STMAT           TYPE /BI0/OIRSL_STMAT,
         InfoObject: 0RT_MOVRET Bewegungsart ist Retoure.
            RT_MOVRET           TYPE /BI0/OIRT_MOVRET,
         InfoObject: 0RSL_STAUTO Automatisch ergänzte Komponente.
            RSL_STAUTO           TYPE /BI0/OIRSL_STAUTO,
         InfoObject: 0RT_MOVTRAN Bewegungsart ist Umlagerung.
            RT_MOVTRAN           TYPE /BI0/OIRT_MOVTRAN,
         InfoObject: 0RT_MATPOST Umbuchung Artikel an Artikel.
            RT_MATPOST           TYPE /BI0/OIRT_MATPOST,
         InfoObject: 0RT_SASTSV Umsatzanteil am Set Verkaufswert in Hauswä
    *hrung.
            RT_SASTSV           TYPE /BI0/OIRT_SASTSV,
         InfoObject: 0RT_SASTST Umsatzanteil am Set Verkaufswert mit Steue
    *r in Hauswährung.
            RT_SASTST           TYPE /BI0/OIRT_SASTST,
         Field: RECORD.
            RECORD           TYPE RSARECORD,      END   OF tys_SC_1_full.
        TYPES:
    tyt_SC_1_full        TYPE STANDARD TABLE OF tys_SC_1_full
                            WITH NON-UNIQUE DEFAULT KEY.
        TYPES:
          BEGIN OF tys_TG_1_full,
         InfoObject: 0CHNGID Änderungslauf ID.
            CHNGID           TYPE /BI0/OICHNGID,
         InfoObject: 0RECORDTP Satztyp.
            RECORDTP           TYPE /BI0/OIRECORDTP,
         InfoObject: 0REQUID Request ID.
            REQUID           TYPE /BI0/OIREQUID,
         InfoObject: 0CALDAY Kalendertag.
            CALDAY           TYPE /BI0/OICALDAY,
         InfoObject: 0CALMONTH Kalenderjahr / Monat.
            CALMONTH           TYPE /BI0/OICALMONTH,
         InfoObject: 0CALWEEK Kalenderjahr / Woche.
            CALWEEK           TYPE /BI0/OICALWEEK,
         InfoObject: 0CALYEAR Kalenderjahr.
            CALYEAR           TYPE /BI0/OICALYEAR,
         InfoObject: 0MATERIAL Material.
            MATERIAL           TYPE /BI0/OIMATERIAL,
         InfoObject: 0PLANT Werk.
            PLANT           TYPE /BI0/OIPLANT,
         InfoObject: 0STOR_LOC Lagerort.
            STOR_LOC           TYPE /BI0/OISTOR_LOC,
         InfoObject: 0BATCH Chargennummer.
            BATCH           TYPE /BI0/OIBATCH,
         InfoObject: 0STOCKTYPE Bestandsausprägung.
            STOCKTYPE           TYPE /BI0/OISTOCKTYPE,
         InfoObject: 0STOCKCAT Bestandstypen.
            STOCKCAT           TYPE /BI0/OISTOCKCAT,
         InfoObject: 0GN_VENDOR Lieferant.
            GN_VENDOR           TYPE /BI0/OIGN_VENDOR,
         InfoObject: 0RECVS_VAL Zugangswert Bewerteter Bestand.
            RECVS_VAL           TYPE /BI0/OIRECVS_VAL,
         InfoObject: 0ISSVS_VAL Abgangswert Bewerteter Bestand.
            ISSVS_VAL           TYPE /BI0/OIISSVS_VAL,
         InfoObject: 0ISSBLOSTCK Abgangsmenge Gesperrter Bestand.
            ISSBLOSTCK           TYPE /BI0/OIISSBLOSTCK,
         InfoObject: 0ISSCNSSTCK Abgangsmenge Konsignationsbestand.
            ISSCNSSTCK           TYPE /BI0/OIISSCNSSTCK,
         InfoObject: 0ISSQMSTCK Abgangsmenge Qualitätsbestand.
            ISSQMSTCK           TYPE /BI0/OIISSQMSTCK,
         InfoObject: 0ISSTRANSST Abgangsmenge Transitbestand.
            ISSTRANSST           TYPE /BI0/OIISSTRANSST,
         InfoObject: 0RECBLOSTCK Zugangsmenge Gesperrter Bestand.
            RECBLOSTCK           TYPE /BI0/OIRECBLOSTCK,
         InfoObject: 0RECCNSSTCK Zugangsmenge Konsignationsbestand.
            RECCNSSTCK           TYPE /BI0/OIRECCNSSTCK,
         InfoObject: 0RECQMSTCK Zugangsmenge Qualitätsbestand.
            RECQMSTCK           TYPE /BI0/OIRECQMSTCK,
         InfoObject: 0RECTRANSST Zugangsmenge Transitbestand.
            RECTRANSST           TYPE /BI0/OIRECTRANSST,
         InfoObject: 0ISSSCRP Abgangsmenge Ausschuss.
            ISSSCRP           TYPE /BI0/OIISSSCRP,
         InfoObject: 0ISSVALSCRP Abgangswert Ausschuss.
            ISSVALSCRP           TYPE /BI0/OIISSVALSCRP,
         InfoObject: 0RECTOTSTCK Zugangsmenge Gesamt Bestand.
            RECTOTSTCK           TYPE /BI0/OIRECTOTSTCK,
         InfoObject: 0ISSTOTSTCK Abgangsmenge Gesamtbestand.
            ISSTOTSTCK           TYPE /BI0/OIISSTOTSTCK,
         InfoObject: 0ISSVALSTCK Abgangsmenge Bewerteter Bestand.
            ISSVALSTCK           TYPE /BI0/OIISSVALSTCK,
         InfoObject: 0RECVALSTCK Zugangsmenge Bewerteter Bestand.
            RECVALSTCK           TYPE /BI0/OIRECVALSTCK,
         InfoObject: 0VENCONCON Verbrauchswerte Lieferantenkonsignationsbe
    *stand.
            VENCONCON           TYPE /BI0/OIVENCONCON,
         InfoObject: 0LOC_CURRCY Hauswährung.
            LOC_CURRCY           TYPE /BI0/OILOC_CURRCY,
         InfoObject: 0BASE_UOM Basismengeneinheit.
            BASE_UOM           TYPE /BI0/OIBASE_UOM,
         Field: RECORD Nummer des Datensatzes.
            RECORD           TYPE RSARECORD,
          END   OF tys_TG_1_full.
        TYPES:
          BEGIN OF tys_SC_1__RULE_9,
         InfoObject: 0BWAPPLNM Anwendungskomponente.
            BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
         InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
            CPQUABU           TYPE /BI0/OICPQUABU,
         InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
            PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
         InfoObject: 0STOCKCAT Bestandstypen.
            STOCKCAT           TYPE /BI0/OISTOCKCAT,
         InfoObject: 0STOCKRELEV BW: Best.Relevanz.
            STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
         InfoObject: 0STOCKTYPE Bestandsausprägung.
            STOCKTYPE           TYPE /BI0/OISTOCKTYPE,
         InfoObject: 0BASE_UOM Basismengeneinheit.
            BASE_UOM           TYPE /BI0/OIBASE_UOM,
          END   OF tys_SC_1__RULE_9.
        TYPES:
          BEGIN OF tys_SC_1__RULE_10,
         InfoObject: 0BWAPPLNM Anwendungskomponente.
            BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
         InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
            CPQUABU           TYPE /BI0/OICPQUABU,
         InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
            PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
         InfoObject: 0STOCKCAT Bestandstypen.
            STOCKCAT           TYPE /BI0/OISTOCKCAT,
         InfoObject: 0STOCKRELEV BW: Best.Relevanz.
            STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
         InfoObject: 0STOCKTYPE Bestandsausprägung.
            STOCKTYPE           TYPE /BI0/OISTOCKTYPE,
         InfoObject: 0BASE_UOM Basismengeneinheit.
            BASE_UOM           TYPE /BI0/OIBASE_UOM,
          END   OF tys_SC_1__RULE_10.
        TYPES:
          BEGIN OF tys_SC_1__RULE_11,
         InfoObject: 0GN_R3_SSY Quellsystem der R/3 Entität.
            GN_R3_SSY           TYPE /BI0/OIGN_R3_SSY,
         InfoObject: 0STOCKCAT Bestandstypen.
            STOCKCAT           TYPE /BI0/OISTOCKCAT,
         InfoObject: 0VENDOR Lieferant.
            VENDOR           TYPE /BI0/OIVENDOR,
          END   OF tys_SC_1__RULE_11.
        TYPES:
          BEGIN OF tys_SC_1__RULE_12,
         InfoObject: 0BWAPPLNM Anwendungskomponente.
            BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
         InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
            CPPVLC           TYPE /BI0/OICPPVLC,
         InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
            INDSPECSTK           TYPE /BI0/OIINDSPECSTK,
         InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
            PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
         InfoObject: 0STOCKCAT Bestandstypen.
            STOCKCAT           TYPE /BI0/OISTOCKCAT,
         InfoObject: 0STOCKRELEV BW: Best.Relevanz.
            STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
         InfoObject: 0LOC_CURRCY Hauswährung.
            LOC_CURRCY           TYPE /BI0/OILOC_CURRCY,
          END   OF tys_SC_1__RULE_12.
        TYPES:
          BEGIN OF tys_SC_1__RULE_13,
         InfoObject: 0BWAPPLNM Anwendungskomponente.
            BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
         InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
            CPPVLC           TYPE /BI0/OICPPVLC,
         InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
            INDSPECSTK           TYPE /BI0/OIINDSPECSTK,
         InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
            PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
         InfoObject: 0STOCKCAT Bestandstypen.
            STOCKCAT           TYPE /BI0/OISTOCKCAT,
         InfoObject: 0STOCKRELEV BW: Best.Relevanz.
            STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
         InfoObject: 0LOC_CURRCY Hauswährung.
            LOC_CURRCY           TYPE /BI0/OILOC_CURRCY,
          END   OF tys_SC_1__RULE_13.
        TYPES:
          BEGIN OF tys_SC_1__RULE_15,
         InfoObject: 0GN_R3_SSY Quellsystem der R/3 Entität.
            GN_R3_SSY           TYPE /BI0/OIGN_R3_SSY,
         InfoObject: 0STOCKCAT Bestandstypen.
            STOCKCAT           TYPE /BI0/OISTOCKCAT,
         InfoObject: 0STOCKTYPE Bestandsausprägung.
            STOCKTYPE           TYPE /BI0/OISTOCKTYPE,
         InfoObject: 0VENDOR Lieferant.
            VENDOR           TYPE /BI0/OIVENDOR,
          END   OF tys_SC_1__RULE_15.
        TYPES:
          BEGIN OF tys_SC_1__RULE_19,
         InfoObject: 0BWAPPLNM Anwendungskomponente.
            BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
         InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
            CPQUABU           TYPE /BI0/OICPQUABU,
         InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
            PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
         InfoObject: 0STOCKRELEV BW: Best.Relevanz.
            STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
         InfoObject: 0BASE_UOM Basismengeneinheit.
            BASE_UOM           TYPE /BI0/OIBASE_UOM,
          END   OF tys_SC_1__RULE_19.
        TYPES:
          BEGIN OF tys_SC_1__RULE_20,
         InfoObject: 0BWAPPLNM Anwendungskomponente.
            BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
         InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
            CPQUABU           TYPE /BI0/OICPQUABU,
         InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
            PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
         InfoObject: 0STOCKRELEV BW: Best.Relevanz.
            STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
         InfoObject: 0BASE_UOM Basismengeneinheit.
            BASE_UOM           TYPE /BI0/OIBASE_UOM,
          END   OF tys_SC_1__RULE_20.
        TYPES:
          BEGIN OF tys_SC_1__RULE_21,
         InfoObject: 0BWAPPLNM Anwendungskomponente.
            BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
         InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
            CPQUABU           TYPE /BI0/OICPQUABU,
         InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
            INDSPECSTK           TYPE /BI0/OIINDSPECSTK,
         InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
            PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
         InfoObject: 0STOCKCAT Bestandstypen.
            STOCKCAT           TYPE /BI0/OISTOCKCAT,
         InfoObject: 0STOCKRELEV BW: Best.Relevanz.
            STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
         InfoObject: 0BASE_UOM Basismengeneinheit.
            BASE_UOM           TYPE /BI0/OIBASE_UOM,
          END   OF tys_SC_1__RULE_21.
        TYPES:
          BEGIN OF tys_SC_1__RULE_22,
         InfoObject: 0BWAPPLNM Anwendungskomponente.
            BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
         InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
            CPQUABU           TYPE /BI0/OICPQUABU,
         InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
            INDSPECSTK           TYPE /BI0/OIINDSPECSTK,
         InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
            PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
         InfoObject: 0STOCKCAT Bestandstypen.
            STOCKCAT           TYPE /BI0/OISTOCKCAT,
         InfoObject: 0STOCKRELEV BW: Best.Relevanz.
            STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
         InfoObject: 0BASE_UOM Basismengeneinheit.
            BASE_UOM           TYPE /BI0/OIBASE_UOM,
          END   OF tys_SC_1__RULE_22.
        TYPES:
          BEGIN OF tys_SC_1__RULE_25,
         InfoObject: 0GN_R3_SSY Quellsystem der R/3 Entität.
            GN_R3_SSY           TYPE /BI0/OIGN_R3_SSY,
         InfoObject: 0STOCKCAT Bestandstypen.
            STOCKCAT           TYPE /BI0/OISTOCKCAT,
         InfoObject: 0STOCKTYPE Bestandsausprägung.
            STOCKTYPE           TYPE /BI0/OISTOCKTYPE,
         InfoObject: 0VENDOR Lieferant.
            VENDOR           TYPE /BI0/OIVENDOR,
          END   OF tys_SC_1__RULE_25.
        TYPES:
          BEGIN OF tys_SC_1__RULE_31,
         InfoObject: 0BWAPPLNM Anwendungskomponente.
            BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
         InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
            CPPVLC           TYPE /BI0/OICPPVLC,
         InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
            PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
         InfoObject: 0STOCKCAT Bestandstypen.
            STOCKCAT           TYPE /BI0/OISTOCKCAT,
         InfoObject: 0STOCKRELEV BW: Best.Relevanz.
            STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
         InfoObject: 0LOC_CURRCY Hauswährung.
            LOC_CURRCY           TYPE /BI0/OILOC_CURRCY,
          END   OF tys_SC_1__RULE_31.
        TYPES:
          BEGIN OF tys_SC_1__RULE_37,
         InfoObject: 0BWAPPLNM Anwendungskomponente.
            BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
         InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
            CPQUABU           TYPE /BI0/OICPQUABU,
         InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
            PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
         InfoObject: 0STOCKCAT Bestandstypen.
            STOCKCAT           TYPE /BI0/OISTOCKCAT,
         InfoObject: 0STOCKRELEV BW: Best.Relevanz.
            STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
         InfoObject: 0STOCKTYPE Bestandsausprägung.
            STOCKTYPE           TYPE /BI0/OISTOCKTYPE,
         InfoObject: 0BASE_UOM Basismengeneinheit.
            BASE_UOM           TYPE /BI0/OIBASE_UOM,
          END   OF tys_SC_1__RULE_37.
        TYPES:
          BEGIN OF tys_SC_1__RULE_38,
         InfoObject: 0BWAPPLNM Anwendungskomponente.
            BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
         InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
            CPQUABU           TYPE /BI0/OICPQUABU,
         InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
            PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
         InfoObject: 0STOCKCAT Bestandstypen.
            STOCKCAT           TYPE /BI0/OISTOCKCAT,
         InfoObject: 0STOCKRELEV BW: Best.Relevanz.
            STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
         InfoObject: 0STOCKTYPE Bestandsausprägung.
            STOCKTYPE           TYPE /BI0/OISTOCKTYPE,
         InfoObject: 0BASE_UOM Basismengeneinheit.
            BASE_UOM           TYPE /BI0/OIBASE_UOM,
          END   OF tys_SC_1__RULE_38.
        TYPES:
          BEGIN OF tys_SC_1__RULE_39,
         InfoObject: 0BWAPPLNM Anwendungskomponente.
            BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
         InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
            CPQUABU           TYPE /BI0/OICPQUABU,
         InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
            PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
         InfoObject: 0STOCKRELEV BW: Best.Relevanz.
            STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
         InfoObject: 0STOCKTYPE Bestandsausprägung.
            STOCKTYPE           TYPE /BI0/OISTOCKTYPE,
         InfoObject: 0BASE_UOM Basismengeneinheit.
            BASE_UOM           TYPE /BI0/OIBASE_UOM,
          END   OF tys_SC_1__RULE_39.
        TYPES:
          BEGIN OF tys_SC_1__RULE_40,
         InfoObject: 0BWAPPLNM Anwendungskomponente.
            BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
         InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
            CPQUABU           TYPE /BI0/OICPQUABU,
         InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
            PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
         InfoObject: 0STOCKCAT Bestandstypen.
            STOCKCAT           TYPE /BI0/OISTOCKCAT,
         InfoObject: 0STOCKRELEV BW: Best.Relevanz.
            STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
         InfoObject: 0STOCKTYPE Bestandsausprägung.
            STOCKTYPE           TYPE /BI0/OISTOCKTYPE,
         InfoObject: 0BASE_UOM Basismengeneinheit.
            BASE_UOM           TYPE /BI0/OIBASE_UOM,
          END   OF tys_SC_1__RULE_40.
        TYPES:
          BEGIN OF tys_SC_1__RULE_41,
         InfoObject: 0BWAPPLNM Anwendungskomponente.
            BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
         InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
            CPQUABU           TYPE /BI0/OICPQUABU,
         InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
            PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
         InfoObject: 0STOCKCAT Bestandstypen.
            STOCKCAT           TYPE /BI0/OISTOCKCAT,
         InfoObject: 0STOCKRELEV BW: Best.Relevanz.
            STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
         InfoObject: 0STOCKTYPE Bestandsausprägung.
            STOCKTYPE           TYPE /BI0/OISTOCKTYPE,
         InfoObject: 0BASE_UOM Basismengeneinheit.
            BASE_UOM           TYPE /BI0/OIBASE_UOM,
          END   OF tys_SC_1__RULE_41.
        TYPES:
          BEGIN OF tys_SC_1__RULE_42,
         InfoObject: 0BWAPPLNM Anwendungskomponente.
            BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
         InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
            CPQUABU           TYPE /BI0/OICPQUABU,
         InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
            PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
         InfoObject: 0STOCKRELEV BW: Best.Relevanz.
            STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
         InfoObject: 0STOCKTYPE Bestandsausprägung.
            STOCKTYPE           TYPE /BI0/OISTOCKTYPE,
         InfoObject: 0BASE_UOM Basismengeneinheit.
            BASE_UOM           TYPE /BI0/OIBASE_UOM,
          END   OF tys_SC_1__RULE_42.
        TYPES:
          BEGIN OF tys_SC_1__RULE_43,
         InfoObject: 0BWAPPLNM Anwendungskomponente.
            BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
         InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
            CPQUABU           TYPE /BI0/OICPQUABU,
         InfoObject: 0MOVETYPE Bewegungsart (Bestandsführung).
            MOVETYPE           TYPE /BI0/OIMOVETYPE,
         InfoObject: 0BASE_UOM Basismengeneinheit.
            BASE_UOM           TYPE /BI0/OIBASE_UOM,
          END   OF tys_SC_1__RULE_43.
        TYPES:
          BEGIN OF tys_SC_1__RULE_51,
         InfoObject: 0BWAPPLNM Anwendungskomponente.
            BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
         InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
            CPPVLC           TYPE /BI0/OICPPVLC,
         InfoObject: 0MOVETYPE Bewegungsart (Bestandsführung).
            MOVETYPE           TYPE /BI0/OIMOVETYPE,
         InfoObject: 0LOC_CURRCY Hauswährung.
            LOC_CURRCY           TYPE /BI0/OILOC_CURRCY,
          END   OF tys_SC_1__RULE_51.
    Additional types for start routine interface
      TYPES:
        data_package_structure type tys_SC_1_full.
    Additional declaration for update rule interface
      DATA:
        MONITOR       type standard table of rsmonitor  WITH HEADER LINE,
        MONITOR_RECNO type standard table of rsmonitors WITH HEADER LINE,
        RECORD_NO     LIKE SY-TABIX,
        RECORD_ALL    LIKE SY-TABIX,
        SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS.
    global definitions from update rules
    INCLUDE rsbctgn_top.
    INCLUDE rsbctgn_update_rules.
    FORM routine_9998
      TABLES DATA_PACKAGE TYPE tyt_SC_1_full
      CHANGING
        ABORT          LIKE sy-subrc
      RAISING
        cx_sy_arithmetic_error
        cx_sy_conversion_error.
    init variables
    fill the internal table "MONITOR", to make monitor entries
    see OSS note 571669
      LOOP AT DATA_PACKAGE.
        IF DATA_PACKAGE-stockcat EQ 'V' OR
           DATA_PACKAGE-stocktype EQ 'V'.
          DELETE DATA_PACKAGE.
        ENDIF.
      ENDLOOP.
    if abort is not equal zero, the update process will be canceled
      ABORT = 0.
    ENDFORM.                    "routine_9998
    FORM routine_0012
      USING
        COMM_STRUCTURE type tys_SC_1__RULE_9
      CHANGING
        RESULT         TYPE tys_TG_1_full-ISSCNSSTCK
        RETURNCODE     LIKE sy-subrc
        ABORT          LIKE sy-subrc
      RAISING
        cx_sy_arithmetic_error
        cx_sy_conversion_error.
    init variables
    fill the internal table "MONITOR", to make monitor entries
    only goods issue is considered
      IF ( COMM_STRUCTURE-processkey EQ '100'   "Other Issues
        OR COMM_STRUCTURE-processkey EQ '101'   "Returns / Vendor
        OR COMM_STRUCTURE-processkey EQ '104'   "Material Transfer
        OR COMM_STRUCTURE-processkey EQ '105'   "Stock Adjustment InvD
        OR COMM_STRUCTURE-processkey EQ '106'   "Stock Adjustment Other
        OR COMM_STRUCTURE-processkey EQ '110' ) "Issue from Stock Transfer
       AND COMM_STRUCTURE-bwapplnm EQ 'MM'
    only movements which are relevant for stock control
       AND COMM_STRUCTURE-stockrelev EQ '1'
       AND COMM_STRUCTURE-cpquabu <> 0.
    only consignment stock is considered
        CASE COMM_STRUCTURE-stockcat.
          WHEN 'K'.
            RESULT = COMM_STRUCTURE-cpquabu.
            RETURNCODE = 0.
          WHEN space.
            IF COMM_STRUCTURE-stocktype CA 'KLM'.
              RESULT = COMM_STRUCTURE-cpquabu.
              RETURNCODE = 0.
            ELSE.
              RETURNCODE = 4.
            ENDIF.
          WHEN OTHERS.
            RETURNCODE = 4.
        ENDCASE.
      ELSE.
    if the returncode is not equal zero, the result will not be updated
        RETURNCODE = 4.
      ENDIF.
    if abort is not equal zero, the update process will be canceled
      ABORT = 0.
    ENDFORM.                    "routine_0012
    FORM routine_0014
      USING
        COMM_STRUCTURE type tys_SC_1__RULE_10
      CHANGING
        RESULT         TYPE tys_TG_1_full-RECCNSSTCK
        RETURNCODE     LIKE sy-subrc
        ABORT          LIKE sy-subrc
      RAISING
        cx_sy_arithmetic_error
        cx_sy_conversion_error.
    init variables
    fill the internal table "MONITOR", to make monitor entries
    only goods receipt is considered
      IF ( COMM_STRUCTURE-processkey EQ '000'   "Other Receipts
        OR COMM_STRUCTURE-processkey EQ '001'   "Goods Receipt / Vendor
        OR COMM_STRUCTURE-processkey EQ '004'   "Material Transfer
        OR COMM_STRUCTURE-processkey EQ '005'   "Stock Adjustment InvD
        OR COMM_STRUCTURE-processkey EQ '006'   "Stock Adjustment Other
        OR COMM_STRUCTURE-processkey EQ '010' ) "Receipt from Stock Transfer
       AND COMM_STRUCTURE-bwapplnm EQ 'MM'
    only movements which are relevant for stock control
       AND COMM_STRUCTURE-stockrelev EQ '1'
       AND COMM_STRUCTURE-cpquabu <> 0.
    only consignment stock is considered
        CASE COMM_STRUCTURE-stockcat.
          WHEN 'K'.
            RESULT = COMM_STRUCTURE-cpquabu.
            RETURNCODE = 0.
          WHEN space.
            IF COMM_STRUCTURE-stocktype CA 'KLM'.
              RESULT = COMM_STRUCTURE-cpquabu.
              RETURNCODE = 0.
            ELSE.
              RETURNCODE = 4.
            ENDIF.
          WHEN OTHERS.
            RETURNCODE = 4.
        ENDCASE.
      ELSE.
    if the returncode is not equal zero, the result will not be updated
        RETURNCODE = 4.
      ENDIF.
    if abort is not equal zero, the update process will be canceled
      ABORT = 0.
    ENDFORM.                    "routine_0014
    FORM routine_0041
      USING
        COMM_STRUCTURE type tys_SC_1__RULE_11
      CHANGING
        RESULT         TYPE tys_TG_1_full-GN_VENDOR
        RETURNCODE     LIKE sy-subrc
        ABORT          LIKE sy-subrc
      RAISING
        cx_sy_arithmetic_error
        cx_sy_conversion_error.
    init variables
    fill the internal table "MONITOR", to make monitor entries
    ... determine consolidated key
      IF COMM_STRUCTURE-stockcat EQ 'K'.
        PERFORM  gn_get_global_key TABLES MONITOR
                              USING    COMM_STRUCTURE-gn_r3_ssy
                                       g_c_bwbeoty_r3vendor
                                       COMM_STRUCTURE-vendor
                                       RECORD_NO
                                       RECORD_ALL
                              CHANGING RESULT
                                       ABORT.
    if the returncode is not equal zero, the result will not be updated
      Endif.
      RETURNCODE = 0.
    ENDFORM.                    "routine_0041
    FORM routine_0010
      USING
        COMM_STRUCTURE type tys_SC_1__RULE_12
      CHANGING
        RESULT         TYPE tys_TG_1_full-ISSVS_VAL
        RETURNCODE     LIKE sy-subrc
        ABORT          LIKE sy-subrc
      RAISING
        cx_sy_arithmetic_error
        cx_sy_conversion_error.
    init variables
    fill the internal table "MONITOR", to make monitor entries
    only goods issue is considered
      IF ( COMM_STRUCTURE-processkey EQ '100'   "Other Issues
        OR COMM_STRUCTURE-processkey EQ '101'   "Returns / Vendor
        OR COMM_STRUCTURE-processkey EQ '104'   "Material Transfer
        OR COMM_STRUCTURE-processkey EQ '105'   "Stock Adjustment InvD
        OR COMM_STRUCTURE-processkey EQ '106

  • Error in Routine while migrating standard Transformations from 3.5 to BI7.0

    Hi Experts,
    We are migrating the Standard trasformations, from old version to new BI 7.0 version. when trying to create the new transformation we are getting a routine error, and unable activate the transformation.
    Trasformation Name: TRCS ZCO_OM_NAE_1 -> CUBE 0PS_C08
    Routine Desc.: Conversion of Actual / Commitment / Plan to Resid.Order Plan
    Source Fields: 0CURRENCY & 0FISCPER
    Target Fields: 0AMOUNT & 0CURRENCY
    Error Message: E:Field "COMM_STRUCTURE" is unknown. It is neither in one of the specified tables nor defined by a "DATA" statement. "DATA" statement.
    Routine:
    PROGRAM trans_routine.
          CLASS routine DEFINITION
    CLASS lcl_transform DEFINITION.
      PUBLIC SECTION.
    Attributs
        DATA:
          p_check_master_data_exist
                TYPE RSODSOCHECKONLY READ-ONLY,
    *-    Instance for getting request runtime attributs;
        Available information: Refer to methods of
        interface 'if_rsbk_request_admintab_view'
          p_r_request
                TYPE REF TO if_rsbk_request_admintab_view READ-ONLY.
      PRIVATE SECTION.
        TYPE-POOLS: rsd, rstr.
      Rule specific types
    $$ begin of global - insert your declaration only below this line  -
    ... "insert your code here
    $$ end of global - insert your declaration only before this line   -
    ENDCLASS.                    "routine DEFINITION
    $$ begin of 2nd part global - insert your code only below this line  *
    $$ end of rule type
        TYPES:
          BEGIN OF tys_TG_1_full,
         InfoObject: 0CHNGID Change Run ID.
            CHNGID           TYPE /BI0/OICHNGID,
         InfoObject: 0RECORDTP Record type.
            RECORDTP           TYPE /BI0/OIRECORDTP,
         InfoObject: 0REQUID Request ID.
            REQUID           TYPE /BI0/OIREQUID,
         InfoObject: 0FISCVARNT Fiscal year variant.
            FISCVARNT           TYPE /BI0/OIFISCVARNT,
         InfoObject: 0FISCYEAR Fiscal year.
            FISCYEAR           TYPE /BI0/OIFISCYEAR,
         InfoObject: 0CURRENCY Currency key.
            CURRENCY           TYPE /BI0/OICURRENCY,
         InfoObject: 0CO_AREA Controlling area.
            CO_AREA           TYPE /BI0/OICO_AREA,
         InfoObject: 0CURTYPE Currency Type.
            CURTYPE           TYPE /BI0/OICURTYPE,
         InfoObject: 0METYPE Key Figure Type.
            METYPE           TYPE /BI0/OIMETYPE,
         InfoObject: 0VALUATION Valuation View.
            VALUATION           TYPE /BI0/OIVALUATION,
         InfoObject: 0VERSION Version.
            VERSION           TYPE /BI0/OIVERSION,
         InfoObject: 0VTYPE Value Type for Reporting.
            VTYPE           TYPE /BI0/OIVTYPE,
         InfoObject: 0WBS_ELEMT Work Breakdown Structure Element (WBS Elem
    *ent).
            WBS_ELEMT           TYPE /BI0/OIWBS_ELEMT,
         InfoObject: 0COORDER Order Number.
            COORDER           TYPE /BI0/OICOORDER,
         InfoObject: 0PROJECT Project Definition.
            PROJECT           TYPE /BI0/OIPROJECT,
         InfoObject: 0ACTIVITY Network Activity.
            ACTIVITY           TYPE /BI0/OIACTIVITY,
         InfoObject: 0NETWORK Network.
            NETWORK           TYPE /BI0/OINETWORK,
         InfoObject: 0PROFIT_CTR Profit Center.
            PROFIT_CTR           TYPE /BI0/OIPROFIT_CTR,
         InfoObject: 0COMP_CODE Company code.
            COMP_CODE           TYPE /BI0/OICOMP_CODE,
         InfoObject: 0BUS_AREA Business area.
            BUS_AREA           TYPE /BI0/OIBUS_AREA,
         InfoObject: 0ACTY_ELEMT Network Activity Element.
            ACTY_ELEMT           TYPE /BI0/OIACTY_ELEMT,
         InfoObject: 0STATUSSYS0 System Status.
            STATUSSYS0           TYPE /BI0/OISTATUSSYS0,
         InfoObject: 0PS_OBJ PS Object Type.
            PS_OBJ           TYPE /BI0/OIPS_OBJ,
         InfoObject: 0VTSTAT Statistics indicator for value type.
            VTSTAT           TYPE /BI0/OIVTSTAT,
         InfoObject: 0AMOUNT Amount.
            AMOUNT           TYPE /BI0/OIAMOUNT,
         Field: RECORD Data record number.
            RECORD           TYPE RSARECORD,
          END   OF tys_TG_1_full.
    Additional declaration for update rule interface
      DATA:
        MONITOR       type standard table of rsmonitor  WITH HEADER LINE,
        MONITOR_RECNO type standard table of rsmonitors WITH HEADER LINE,
        RECORD_NO     LIKE SY-TABIX,
        RECORD_ALL    LIKE SY-TABIX,
        SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS.
    global definitions from update rules
    TABLES: ...
    DATA:   ...
    FORM routine_0001
      CHANGING
        RETURNCODE     LIKE sy-subrc
        ABORT          LIKE sy-subrc
      RAISING
        cx_sy_arithmetic_error
        cx_sy_conversion_error.
    init variables
    not supported
         icube_values = g.
         CLEAR result_table. REFRESH result_table.
      type-pools: PSBW1.
      data: l_psbw1_type_s_int1 type psbw1_type_s_int1.
      data: lt_spread_values type PSBW1_TYPE_T_ACT_SPREAD.
      field-symbols: .
    füllen Rückgabetabelle !
        move-corresponding  to RESULT_TABLE.
        check not RESULT_TABLE-amount is initial.
        append RESULT_TABLE.
      endloop.
    if the returncode is not equal zero, the result will not be updated
      RETURNCODE = 0.
    if abort is not equal zero, the update process will be canceled
      ABORT = 0.
    ENDFORM.                    "routine_0001
    $$ end of 2nd part global - insert your code only before this line   *
          CLASS routine IMPLEMENTATION
    CLASS lcl_transform IMPLEMENTATION.
    *$*$ begin of routine - insert your code only below this line        *-*
      Data:
        l_subrc          type sy-tabix,
        l_abort          type sy-tabix,
        ls_monitor       TYPE rsmonitor,
        ls_monitor_recno TYPE rsmonitors.
      REFRESH:
        MONITOR.
    Runtime attributs
        SOURCE_SYSTEM  = p_r_request->get_logsys( ).
    Migrated update rule call
      Perform routine_0001
      CHANGING
        l_subrc
        l_abort.
    *-- Convert Messages in Transformation format
        LOOP AT MONITOR INTO ls_monitor.
          move-CORRESPONDING ls_monitor to MONITOR_REC.
          append monitor_rec to MONITOR.
        ENDLOOP.
        IF l_subrc <> 0.
          RAISE EXCEPTION TYPE cx_rsrout_skip_val.
        ENDIF.
        IF l_abort <> 0.
          RAISE EXCEPTION TYPE CX_RSROUT_ABORT.
        ENDIF.
    $$ end of routine - insert your code only before this line         -
      ENDMETHOD.                    "compute_0AMOUNT
          Method invert_0AMOUNT
          This subroutine needs to be implemented only for direct access
          (for better performance) and for the Report/Report Interface
          (drill through).
          The inverse routine should transform a projection and
          a selection for the target to a projection and a selection
          for the source, respectively.
          If the implementation remains empty all fields are filled and
          all values are selected.
      METHOD invert_0AMOUNT.
    $$ begin of inverse routine - insert your code only below this line-
    ... "insert your code here
    $$ end of inverse routine - insert your code only before this line -
      ENDMETHOD.                    "invert_0AMOUNT
    ENDCLASS.                    "routine IMPLEMENTATION
    Regards
    Krishanu.

    Hi,
    Go through the belowl link it may help you a lot
    /message/7377688#7377688 [original link is broken]
    Regards,
    Marasa.

Maybe you are looking for

  • Can I control iTunes via the the remote on multiple iOS devices at the same time?

    Hi, I know this is probably a no brainer but I have an iPad and an iPhone on one apple id both with the remote app on them. Problem is the app only seems to run on my iPad at the moment! Ideally it would run on both and on a third iPhone (my wifes an

  • Can't print to HP Laserjet 8100

    I can't print a PDF file using Acrobat Professional 8.1.2 to an HP Laserjet 8100. The printer dialog shows the job and lights blink on the printer, but nothing is printed. I can print the same PDF file on the HP 8100 using Apple Preview. I can print

  • Searching adc to vga adaptor

    I'm trying to connect my second Monitor port to a VGA Display and am searching for the correct adaptor. I found solutions on the net, but rather than paying more fore shipping than the connector is worth, I'm looking for someone who has one lost in s

  • PR without material master

    Hi Gurus, When system will trigger, Stock transfer from storage location to storage location and plant to plant in one company code. For Ex: One business group need materials from another business group.What system will trigger for the material?? I m

  • Tablespace fragmentation problem

    All, I am working in Oracle 9i. Developers are facing some problem. Oracle is throwing ORA-1654 error. There is enough space in the tablespaces. To me it seems to be fragmentation problem. I found one query on some site and executed in my environment