System-exception error_message 00564

Hello,
I want to Filling in the Setuptable for LES - Transportation - Carry Out Restructure in TA sibw but every time the backup job stops with
system-exception error_message 00564
Who could help, please?!
Thanx in advance

Hi Nathan,
R u installing any Business content objects?
or
This error cames while running your Process Chain?
regards,
Arun.M.D

Similar Messages

Job cancelled after system exception ERROR_MESSAGE - Why ?

Hi to all,
Anyone knows why, when I execute a program in foreground, everything is ok . When I try to execute it in background (schedulated in a job ) I obtain "Job cancelled after system exception ERROR_MESSAGE
Message no. 00564"
I have a check in 'at selection-screen event' to control "no data output" with an custom error message.
I really don't understand why job is cancelled !
Any ideas ?
Thanks in advance .

Hi,
       Write your message after start-of-selection.
       Instead of putting an error message you can write the message while executing the program in background.
        after select .......
        if sy-subrc <> 0.
          if sy-batch = 'X'.
            write :/ 'No data found'.
         else.
           message e000 with 'No data found'.
        endif.
     endif.
Regards,
Srini.

Job cancelled after system exception ERROR_MESSAGE

Hello all
I am facing the following issue.
A custom report is schedulled and run as backround job. The report should create a txt file on server.
The report works fine in foreground, but as backround job ends up cancelled all the time.
The job log:
Job log overview for job:    VI5 / 13072800
Date       Time     Message text                                                                     Message class Message no. Message type
27.03.2009 13:09:28 Job started                                                                           00           516          S
27.03.2009 13:09:28 Step 001 started (program ZESSRIN110R, variant PR1_0000381, user ID METAPARTNER)      00           550          S
27.03.2009 13:09:28 File creation ERROR:                                                                  00           001          E
27.03.2009 13:09:28 Job cancelled after system exception ERROR_MESSAGE                                    00           564          A
There is no info in SM21 regarding the error.
Can anybody help with this?
Thanx in advance.
imi
Edited by: Imrich Vegh on Mar 27, 2009 2:27 PM

btw the part of my code looks like this:
server path check
    IF p_srv IS NOT INITIAL.
      OPEN DATASET gv_server FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
      IF sy-subrc EQ 0.     --- I keep receiving 8 here in BACKGROUND JOB
        WRITE : / text-077, gv_server.
      ELSE.
        MESSAGE text-069 TYPE 'E'.
      ENDIF.

Job cancelled after system exception ERROR_MESSAGE in DB13

Hello All,
When i opened the t-code DB13 i saw that this job "Mark tables requiring statistics update" is cancelled.
JOB LOG:
12.02.2011 22:00:16 Job started
12.02.2011 22:00:16 Step 001 started (program RSDBAJOB, variant &0000000000085, user ID 80000415)
12.02.2011 22:00:18 Job finished
12.02.2011 22:00:18 Job started
12.02.2011 22:00:18 Step 001 started (program RSADAUP2, variant &0000000000081, user ID 80000415)
12.02.2011 22:01:26 Error when performing the action
12.02.2011 22:01:26 Job cancelled after system exception ERROR_MESSAGE
When check for the BGD Job in SM37 for this job i found the same error in the job log with the status cancelled.
Job log overview for job: DBA!PREPUPDSTAT_____@220000/6007 / 22001700
12.02.2011 22:00:18 Job started
12.02.2011 22:00:18 Step 001 started (program RSADAUP2, variant &0000000000081, user ID 80000415)
12.02.2011 22:01:26 Error when performing the action
12.02.2011 22:01:26 Job cancelled after system exception ERROR_MESSAGE
I couldn't find any logs in SM21 of that time also no dumps in ST22.
Possible reason for this error:
I have scheduled the job Check database structure (only tables) at some other time and deleted the earlier job which was scheduled during the bussiness hours which caused performance problem.
So to avoid performance issue i scheduled this job in the mid night by cancelling the old job which was scheduled during the bussiness hours.
And from the next day i could see this error in DB13.
Rest all the backups are running fine but the only job getting cancelled is for "Mark tables requiring statistics update"
Could anyone tell me what should i do to get rid of this error?
Can i schedule this "Mark tables requiring statistics update" again by deleting the old one?
Thanks.
Regards.
Mudassir Imtiaz

Hello Adrian,
Thanks for your response.
Every alternate day we used to have performance issue at 19:00hrs.
Then when i checked what is causing this problem, i discovered that there was a backup "Check Database Structure (tables only)" scheduled at this time and it was mentioned that this backup may cause performance issue.
Then i changed "Check Database Structure (tables only)" the time of this backup to 03:00hrs.
The next day when i checked DB13 i found that one of the backups failed.
i.e. "Mark Tables Requiring Statistics Update"
Then i checked the log which i posted earlier with the error: "Job cancelled after system exception ERROR_MESSAGE"
I posted this error here and then i tried to delete the jobs scheduled i.e. "Mark Tables Requiring Statistics Update" and then re-schedule it at the same time and interval.
And then it started working fine.
So i just got curious to know the cause of the failure of that job.
Thanks.
Regards,
Mudassir.Imtiaz
P.S There is one more thing which i would like to say which is not related to the above issue, and m sorry to discuss this in this thread.
I found a few Bottlenecks in ST04 with Medium and High priority.
Medium: Selects and fetches selectivity 0.53%: 122569 selects and fetches, 413376906 rows read, 2194738 rows qualified.
High: 108771 primary key range accesses, selectivity 0.19%: 402696322 rows read, 763935 rows qualified.
There are a lot these.
I would really appreciate if you tell me what is the cause for these Bottlenecks and how to resolve.
Thanks a lot.

Is there a way to handle system exception ERROR_MESSAGE?

Hi,
I have a program executed in background, which produces a bunch of consecutive documents for a set of Bulk Shipments -> TD Loading and TD Delivery Confirmation. To create those documents I use function modules 'OIGI_LOADING_CREATE' and 'OIGI_DEL_CONF_CREATE' - both from Industry-Solution Oil-and_Gas (IS-Oil).
In some cases these FM-s produces error messages (E-type) which cancel execution of the program and broke my flow-logic.
Below are few messages recorded in a job log for my task:
18.08.2005 15:56:41 Job started
18.08.2005 15:56:41 Step 001 started (program /PTRL/TAS_POSTPONDED_SYNC, variant , user name IMUTAFCHIEV)
18.08.2005 15:56:58 Shipment 180753 saved
18.08.2005 15:57:06 The plant data of the material 177 is locked by the user BMINKOV
18.08.2005 15:57:06 The plant data of the material 177 is locked by the user BMINKOV
18.08.2005 15:57:06 The plant data of the material 177 is locked by the user BMINKOV
18.08.2005 15:57:06 Job cancelled after system exception ERROR_MESSAGE
Both function modules are not designed to handle any exceptions, and in owr environment (4.6c) there is no documented system exception 'ERROR_MESSAGE' which to be handled in CATCH-ENDCATCH block.
Is there a way to handle this exception and to track the list of error messages produced by some FM into an internal table, log, whatever, as it is done in the log of the background job. I need to find a way write these messages in my log-tables and to proceed further with my flow-logic.
FYI: my program executes an RFC call to a remote system and retrieve a list of documents which need to be synchronized with R/3. I loose information, if the R/3 broke my flow-logic.
Any help would be highly appresiated.
Many thanks in advance.
Ivaylo Mutafchiev

Sven,
I made few programs where we used business scenario:
IS-Oil Shipment => IS-Oil Loading Confirmation => IS-Oil Delivery Confirmation.
All of them are based on Function Module call:
1. OIGI_LOADING_CREATE and
2. OIGI_DEL_CONF_CREATE.
To load shipment I call 1st FM in a way:
CALL FUNCTION 'OIGI_LOADING_CREATE' DESTINATION 'NONE'
       EXPORTING
            I_SUBRC     = 9 "save and commit
            I_SHNUMBER = shNumber
            I_VEHICLE   = vehicle
            I_LDPLT     = plant
            I_LDDATE    = loadDate
            I_LDTIME    = loadTime
            I_LDCDAT    = loadDate
            I_VEH_NR    = veh_nr
       TABLES
            T_OIGISVMQ = quantity_items
            T_OIGISVMQ2 = hpm_append
            T_OIGISIQ   = doc_quan_items
       EXCEPTIONS
            COMMUNICATION_FAILURE = 1 MESSAGE p_error
            SYSTEM_FAILURE = 2 MESSAGE p_error.
To confirm shipment (status 4) I call the same FM with:
CALL FUNCTION 'OIGI_LOADING_CREATE' DESTINATION 'NONE'
       EXPORTING
            I_SUBRC    = 39 "confirm & commit 2nd step
            I_SHNUMBER = shNumber
            I_VEHICLE = vehicle
            I_LDPLT    = werks
       EXCEPTIONS
            COMMUNICATION_FAILURE = 1 MESSAGE sh_error
            SYSTEM_FAILURE = 2 MESSAGE sh_error.
And finaly to finish process (status = 6) I call 2nd FM in a way:
CALL FUNCTION 'OIGI_DEL_CONF_CREATE' DESTINATION 'NONE'
       EXPORTING
            I_SUBRC         = 19 "save, confirm and commit
            I_SHNUMBER      = shNumber
            I_RAPID_CONFIRM = 'X'
            I_DDCDAT        = loadDate
            I_DLDATE        = loadDate
            I_DLTIME        = loadTime
       EXCEPTIONS
            COMMUNICATION_FAILURE = 1 MESSAGE p_error
            SYSTEM_FAILURE = 2 MESSAGE p_error.
FYI: It tooks me some time to 'investigate' and find correct use of these function modules. And I worked VERY CLOSE with our SD consultant.
For details (what the export parameters and tables consist of) and sample code, please contact me at:
ivaylo dot mutafchiev at vbs dot bg
I would be glad to share my knowlege.
Regards,
Ivaylo

Error when executing APD-Job cancelled after system exception ERROR_MESSAGE

Hi,
We have a process chain which executes a APD using an ABAP program RSAN_PROCESS_EXECUTE.
It was executing successfully until few days back but now a days frequently once in 3 days roughly it is getting cancelled during execution of ABAP Program with the message 'Job cancelled after system exception ERROR_MESSAGE'
checked st22 and sm21 but didn't get any clue.But if we execute the same process chain manually(Immediate load) it is working fine all the times.
What may be the reason for the cancellation of the chain sometimes and the same chain working fine some other time and working very much fine when ran manually.
Regards,
Vishnu

Hi Vishnu,
Can you check if there are any other process which is triggering the abap program RSAN_PROCESS_EXECUTE at the same time as the execution of this process in the chain. You can check in which other chains this process is being used. You can compare the time when this failed in the chain you mentioned with the same being run in other chains at the same time.
Sasi

Reg:job cancelled after system exception ERROR_MESSAGE

Hi All,
Process chain has failed in aggregate step with message "job cancelled after system exception ERROR_MESSAGE"
But i manaully done the aggregate step.
But i would like to know the reason for the above message.
Can any one tell me this?
Thanks
SS

Hi,
In the job log of aggregate step in the above line of the message "job cancelled after system exception ERROR_MESSAGE" you will probably find the exact error message.
In the job log it will first display the exact error message and then the message "job cancelled after system exception ERROR_MESSAGE" will appear, Please check it once.

System exception ERROR_MESSAGE

Hi,
A job is getting cancelled and here is the error message
Job started
Step 001 started (program RSPROCESS, variant &0000000043030, user ID ALEREMOTE)
Error sending message to network administrator.
Job cancelled after system exception ERROR_MESSAGE
Regards,
Rajiv

HI Rajiv,
when the job is getting cancelled it might have thrown some dump in the system in ST22.
Please let us know about the dump so that we can analyse further.
Basic checking:
Check whether there are any locks
check for the table space.
check for the RFC connection
Check for TRFC in sm58
Regards,
Vikram

Handle System-Exception ERROR_MESSAGE

Hello everybody,
the problem I want to solve looks as follows:
I have an ABAP report that is runnng as Batch-job (imagine a frame within certain reports run).
The program runs, as customised, the whole day continuesly as a batch-job . At customised intervals it checks some conditions and "submits" other reports also in the same instance of the Batch-job and waits for them to "return".
Within the process/stack of a submitted, second report any messages are posted in certain application logs (BALLOG).
Every message that usually would come to the display is suppressed by FuBa "DIALOG_SET_NO_DIALOG" and "DIALOG_SET_WITH_DIALOG". This is necessary because else the Batch-job would crash as you know.
However, in the endless downs of SAP there is a location where an "E" message raises and the whole job crashes with "A" because of system exception "error_message".
The second job crashes and aborts the whole job without returning to the caller report.
This happens maybe once in a week or once a month, very unregular.
The location is not to be found!
Is is okay that the submitted, second report aborts.
But it is absolutely necessary that the first report still runs after the second one crashed and the batch job still must stay active.
How can I prevent that the wohle job aborts?
Any idea (simple/complicated) is welcome.
Thanx
Frank

Hi,
in fact I still investigate if I have solved the problem.
In my case the reason seems to be related to my "long" running job and the changes of the "Operation Mode" during the job-runtime.
Old runtime settings were 00:05 - 23:50...
Current operation modes   06:00 - 20:00 daytime
                          20:00 - 06:00 night processing
New runtime settings are 06:05 - 19:50 and
                          20:05 - 05:50
The goal was that the job is not active during the change of the operation mode.
Until today it works fine...
Check OSS 35615 & 93732 and other similar related hints.

System exception while deleting the file from app server in background job

Hi All,
I have a issue while the deleting the file from application server.
I am using the statement DELETE DATASET in my program to delete the file from app server.
I am able to delete the file from the app server when i run the program from app server.
When i run the same report from background job i am getting the message called System exception.
Is there any secuirity which i need to get the issue.
Thank You,
Taragini

Hi All,
I get all the authorization sto delete the file from application serever.
Thing is i am able to run the program sucessfully in foreground but not in the background .
It i snot giving any short dump also just JOB is cancelled with the exception 'Job cancelled after system exception ERROR_MESSAGE'.
Can anybody please give me suggestion
Thanks,
Taragini

Exception 'error_message' in ABAP Objects

I've got a heterogeneous scenario with new program parts in ABAP objects and older parts in classical ABAP.
In the older parts some R/3 standard functions are called which dump dialog messages which are not allowed at that state of the program flow ('on commit').
The simple solution in classical ABAP was to use standard exception 'error_message' in the top level 'call function' statement thus catch all dialog messages in lower levels.
I am looking for an analog solution in object oriented ABAP. But exception 'error_message' is not allowed with 'call method'. It cannot be defined statically in the methods declaration. And the system exception caused by the dialog error message is not included in the set of catchable system errors.
I would be grateful for any hints concerning this problem.

Hi
Excuse me! But I didn't want to sent you my answer.
Anyway:
CLASS lcl_my_class DEFINITION.
PUBLIC SECTION.
    METHODS my_method
              EXPORTING
                EXCEPTION TYPE CHAR1
              EXCEPTIONS error_messages.
ENDCLASS.                    "LCL_MY_CLASS DEFINITION
CLASS lcl_my_class IMPLEMENTATION.
METHOD my_method.
    IF EXCEPTION = 'X'.
      MESSAGE e208(00) WITH 'Message error'
                  RAISING error_messages.
    ELSE.
      MESSAGE I208(00) WITH 'OK!'.
    ENDIF.
ENDMETHOD.                    "MY_METHOD
ENDCLASS.                    "LCL_MY_CLASS IMPLEMENTATION
So you did want to do a call like this:
CALL METHOD lcl_my_class=>my_method
   EXCEPTIONS
     error_messages = 1
     error_message = 2
     OTHERS         = 3.
No! you can't do it, but you try to insert your call in fm where you use ERROR_MESSAGE addition. I think you can do it if your methods are std.
Max
Message was edited by: max bianchi

Exception error_message in rfc function module

Hi all,
I am getting a short dump Raise exception in my R/3 system when calling a RFC function module in R/3 for printing a label in LOFTWARE. The error analysis shows the that exception condition 'Nlink exception' condition raised . The rfc destination is working fine and also i have included the predefined exceptions system_failure and communication_failure and also I have used RFC_PING function module before calling teh rfc for printing . Yet it is giving short dump.
I heard that if we include one more exception error_message with return code 99
ie exceptions
    system_failure = 1
    communictaion_failure = 2
    error_message = 99. there will be no short dump.
Can anyone explain me why the return code for exception error_message is not 3 but 99 and also what is the significance of this.
Need your help.

from dump no information is available also it last occured 5 days ago so refreshed from our system..
I want to know what is the importance of the return code 99 here...
can anyone clarify this concept and aslo genrally in rfc exception handling communication_failure and system_failure can handle all type of exceptions then why error_message exception is added with a return code of 99..

System.Exception: null or empty values

Have designed a 4 part form Using DW MX, ASP.NET C# and MySQL
and currently getting the below error when moving from one page to
the next.
The web.config file is on the server, there are no null or
empty values, and the key tags match.
I am new to applicaiton development in DW and am now stuck -
any suggestions?
System.Exception: This page has a MM:DataSet, MM:Insert,
MM:Update or MM:Delete tag with a null or empty value for the
ConnectionString and DatabaseType attributes.
Often, such values come from application settings in the
web.config file. That file might be missing from the server
executing this page. Or, it might be missing the particular add key
tags for the database connection this page uses. If you are using
Dreamweaver, look for the web.config file in the local root folder
of your Dreamweaver site. Once you find this file, you can either:
Put this file onto the server that is executing this page.
Copy the add key tags from the web.config in the local root
folder of your Dreamweaver site and paste them into the web.config
file in the server that is executing this page.
at DreamweaverCtrls.DataSet.DoInit()
Text

http://java.sun.com/docs/books/tutorial/uiswing/components/spinner.html#model
Might be a good start.

Recovering from service call timeouts and other system exception ?

Hi,
I have a BPM project and i do call many web services . When the calls doesn't return in less then the timeout settings the bpm flow is getting suspended and doesn't give me an option recover through EM.
How can I make the flow recoverable through EM for system exceptions ? I already did this for business exceptions, I mean if a service throws an exception I can do a retry through EM.
Using 11.1.1.6
Thanks

Hi,
I have a BPM project and i do call many web services . When the calls doesn't return in less then the timeout settings the bpm flow is getting suspended and doesn't give me an option recover through EM.
How can I make the flow recoverable through EM for system exceptions ? I already did this for business exceptions, I mean if a service throws an exception I can do a retry through EM.
Using 11.1.1.6
Thanks

Exception ERROR_MESSAGE in FM - Capture Success message

Hai Experts,
We all know that we have Exceptions in Function Modules.
If we call a FM using Pattern button in the Editor it gives all the Importing, Exporting.. and Exceptions. If the FM gives an Error or Abort message (MESSAGE TYPE 'E' or 'A') using MESSAGE keyword, we can capture this message using Exception ERROR_MESSAGE instead of message displayed as a pop up.The Addition ERROR_MESSAGE can be added manually to Exceptions after calling the FM using Pattern button.
My requirement is, using ERROR_MESSAGE we can capture only type 'A' and type 'E' kind of messages. The remaining types (S, I and W) are written to the Application Log(The help documentation says about this point - just check out). I just want to read these messages from the Log or some other means.
How could I get these messages ?
To brief the scenario, what I want is, if the FM runs successfully (without any errors) how could I get the messages (type S, I and W) if I am using Addition ERROR_MESSAGE.
I tried this scenario, but could not see any log using TCodes SLG1 or SM21 (if I am not wrong) after I ran the FM successfully. There are also some FMs to read the logs, but they were not helpful.
Thanks in Advance....
Shashidhar

Raj,
If I am using a Standard FM in which an Information message pops up, then to suppress this pop up we can add ERROR_MESSAGE to EXCEPTIONS. I am running this in Foreground.
I question is, how could I read this pop up message info after calling the FM, i.e. I just do not want a pop-up, instead I want to read this info message without pop-up.
I think you get it. Correct me, if I am wrong.
Thanks for your reply,
Shashidhar

System-exception error_message 00564

Similar Messages

Maybe you are looking for