System halt
My macbook pro 13` frequently halted after I updated macOS to 10.8.2. What's wrong with my mac? The screen went black. Nothing could be done, only can long push the power button to shut it down and restart it.
It did not work. The below is report info. Can anybody help me?
Interval Since Last Panic Report: 38265 sec
Panics Since Last Report: 5
Anonymous UUID:
Sun Feb 10 19:50:38 2013
panic(cpu 1 caller 0xffffff80176b7bd5): Kernel trap at 0xffffff801762c064, type 13=general protection, registers:
CR0: 0x0000000080010033, CR2: 0x00007f858ae00000, CR3: 0x000000001d00e000, CR4: 0x0000000000000660
RAX: 0xfff7ff80226cc710, RBX: 0xffffff8022c80aa0, RCX: 0x0000000000000004, RDX: 0xffffff8022deef50
RSP: 0xffffff808f933da0, RBP: 0xffffff808f933dd0, RSI: 0x0000000000000001, RDI: 0xffffff8017cb9c4c
R8: 0x0000000000000001, R9: 0xffffff808f933ea0, R10: 0x0000000000000000, R11: 0x0000000000000202
R12: 0x0000000000000000, R13: 0xffffff8022e126a8, R14: 0x0000000000000000, B15: 0xffffff8022e814e0
RFL: 0x0000000000010046, RIP: 0xffffff801762c064, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x00007f858ae00000, Error code: 0x0000000000000000, Fault CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff808f933a40 : 0xffffff801761d626
0xffffff808f933ab0 : 0xffffff80176b7bd5
0xffffff808f933c80 : 0xffffff80176ce4ed
0xffffff808f933ca0 : 0xffffff801762c064
0xffffff808f933dd0 : 0xffffff801762c0c4
0xffffff808f933df0 : 0xffffff801764167e
0xffffff808f933e20 : 0xffffff8017612ebf
0xffffff808f933e60 : 0xffffff8017612d34
0xffffff808f933eb0 : 0xffffff8017610554
0xffffff808f933f00 : 0xffffff801761961b
0xffffff808f933f70 : 0xffffff80176a5b16
0xffffff808f933fb0 : 0xffffff80176ced53
BSD process name corresponding to current thread: syslogd
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide: 0x0000000017400000
Kernel text base: 0xffffff8017600000
System model name: MacBookPro7,1 (Mac-F222BEC8)
System uptime in nanoseconds: 23914126880
last loaded kext at 1645648939: com.apple.driver.AppleUSBTCButtons 235.4 (addr 0xffffff7f9934b000, size 20480)
loaded kexts:
com.apple.driver.AppleUSBTCButtons 235.4
com.apple.driver.AppleIRController 320.15
com.apple.driver.AppleUSBTCKeyEventDriver 235.4
com.apple.driver.AppleUSBTCKeyboard 235.4
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.AppleUSBCardReader 3.1.0
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.2
com.apple.driver.AirPort.Brcm4331 602.15.22
com.apple.iokit.AppleBCM5701Ethernet 3.2.5b3
com.apple.driver.AppleUSBHub 5.2.5
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AppleAHCIPort 2.4.1
com.apple.driver.AppleUSBEHCI 5.4.0
com.apple.driver.AppleUSBOHCI 5.2.5
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.driver.AppleUSBMultitouch 235.7
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.1
com.apple.iokit.IOUSBMassStorageClass 3.5.0
com.apple.driver.AppleUSBMergeNub 5.2.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.driver.NVSMU 2.2.9
com.apple.iokit.IOUSBUserClient 5.2.5
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.driver.AppleMCP89RootPortPM 1.11
com.apple.iokit.IOAHCIFamily 2.2.1
com.apple.iokit.IOUSBFamily 5.4.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7.2
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: MacBookPro7,1, BootROM MBP71.0039.B0E, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.62f7
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.81.22)
Bluetooth: Version 4.0.9f33 10885, 2 service, 11 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: ST9250315ASG, 250.06 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0x24600000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26100000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06600000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8213, 0x06610000 / 6
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x06500000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0x06300000 / 2
Similar Messages
-
Hp Compaq Mini 700-Fatal Error System Halted CNU9122NHV
Hi I us in my computer Linux Mint i think so but now i start my computer and get this message..
Fatal Error System Halted CNU9122NHV.
I am not so good in english are from Sweden..And i hope someone can help me..
Thank you!!CNU9122NHV IS THE CODE FATAL ERROR. I am not from USA Or London..I can read and write better in Swedish my english is ok not to good! I hope someone here give rigth code to my computer...
-
I have OVS 3.x.x and OVM 3.x.x running on the same physical server. I had some issues trying to configure storage via OVM and I issued a shutdown (I think) from the OVM Web Interface. Now I am unable to keep the server up and running. Everytime I turn on the server, after Oracle VM Manager starts, it shuts down the server automatically within a minute or two after startup.
I am able to login to the server via Putty and stop ovmm service manually. When Oracle VM Manager service is stopped, (SERVICE OVMM STOP) the server does not shutdown automatically. However as soon as I restart the OVMM service, it shuts down the server with message...
Shutdown requested by OVM. The system is going down for system halt NOW!
How do I find out what is causing OVM to issue the shutdown command and edit and fix via command line?Since your server was continually rebooting, do you remember if you issued a shutdown or reboot from OVM web interface? Mine was just shutting down. Have you tried to use the Oracle Virtual Manage Web Interface to either reboot or shutdown the server after your upgrade to 3.2.4? FYI I do not have support. This is my sandbox.
user5728486 wrote:
After a week or so without a resolution from support, I noticed ....
Are you saying that even paying for Oracle Support, they did not resolve this issue? -
HP MINI 110 FATAL ERROR SYSTEM HALTED . [edited] .!!!
HP MINI 110 LAPTOP FATAL ERROR SYSTEM HALTED .
[edited Serial Number by Moderator]
plz ANYbody SOLVE THAT PROBLEM. I HAV NOT OPEN MY LAP SINCE 3 MONths..Cowboys try. e9lo3qquu9 3rd letter lowercase L. 4th letter lowercase O. 6th and 7th letter lowercase Q. Use that code to go into the BIOS. Disable all passwords that are enabled. If asked for the CURRENT password use that code. If asked for NEW password just hit enter. If asked to VERIFY password just hit enter. Save and exit. REO I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.
-
HP MINI 110 FATAL ERROR SYSTEM HALTED
Hi, I have a HP MINI 110 and I forgot the password for bios.
After three unsuccessful attempts on the screen appears: FATAL ERROR SYSTEM HALTED CNU9459FB0
s/n(Personal information removed by Moderator) - p/n: VJ205EA#UUZ
Thank you
Text translated with google
This question was solved.
View Solution.Hi,
Enter: e9lovqo8p1 ( 3rd character is a lower case L )
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
T410 System Halted Without Reason
It is so frustrated that will have to reboot the laptop at least once almost daily due to the system halted without reason. Is there a way / tool for me to find out on what is causing all this to happen?
What are your hardware specs?
I had the same problem -- my T410 has
* Core i7 620M
* 8GB RAM
* Win 7 Ult SP1 (slipstreamed)
* 500GB Seagate Momentus XT
* Optimus graphics
* Intel Centrino 6300
The issue I found that was freezing the laptop was Optimus Graphics + Intel Centrino 6300. Switching off Optimus graphics & its detection in the BIOS eliminated the freezing (shove-under-the-carpet solution).
The thread where I've documented this is
http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T410-2516CTO-random-freezes-without-anythin... -
HP mini 110. System halt error (Forgot Bios Password)
To whom it may concern,
I cannot log into my hp mini 110. it has a bios password set by the previous owner (I got it used) the system halt code is CNU9484CQX.
Thanks.
This question was solved.
View Solution.Hi,
Please try again:
e9lovuve54 or e9lovuve5r (3rd char is lower case of L, the 4th char is lower case of leter O, not zero).
You must use EN-US keyboard.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
HP MINI FATAL ERROR SYSTEM HALTED .CNU94542R9 . Need password to log on!
Please Anybody SOLVE THAT PROBLEM. I HAV NOT OPEN MY PC SINCE one year, plz help me if you can?.
This question was solved.
View Solution.Hi,
Good to hear it's Ok
You can remove the need for a power on password as follows - use the code from my previous post where necessary.
Shut down the notebook. Tap away at the esc key as soon as you press the power button to access the Start-up menu and then select f10 to enter the Bios menu. Use the arrow keys to highlight the Security tab and hit enter. Use the arrow keys again to highlight power on password and hit enter. Enter the current password ( use the code in my previous post ) and then for the new password, just leave this blank and hit enter - do the same for the confirmation field. Press f10, select to save the new settings and hit enter.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
FATAL: Could not read from the boot medium! system halted.
hi
im running win7 64 bit on my pc , installed virtualbox 4.1.16
i have downloaded oracle vm server 3 ( v29653-01.iso ) , created new virtual machine and attached iso file but unable to boot from the iso
i am getting FATAL: Could not read from the boot medium! system halted.
under vm settings > storage > i have
IDE: controller
v29653-01.iso
atrributes: cd/dvd IDE primary master
live cd/dvd unchecked
under general tab i have > Operating system: linux version: oracle (64 bit )
Edited by: user9182826 on Aug 4, 2012 5:34 PM
Edited by: user9182826 on Aug 4, 2012 6:12 PMNot sure if you are running into the same issue..
OVM 3.0.3 - New VM loses filesystem after OS install
For OEL5 VMs on 3.0.3 you have to add 'xen_emul_unplug=never' to your kernel boot line. -
Password Check Failed, Fatal Error, System Halted, CNU949701P
Hello!
I have a HP netbook model Mini CQ 10, and I have not switched it on in a while.
I recently went to turn it on to recover some important documents and this error message shows up;
Password check failed
Fatal Error... System Halted
CNU949701P
Canu anyone PLEASE HELP ME! I would be so grateful!
Thank you!
x
This question was solved.
View Solution.Try >> e9lovox132
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
We have this 48 port switch in our engineering department, and it basically stopped passing network traffic.
When connecting to the Console port and power cycling the switch, this is what I see:
Image Loader 1.0.1
Loading Diagnostic Image File : SRW224G4P_SRW248G4P_boot.bix
Diagnostic 1.0.1
User Mode
--- Performing Power-On Self Tests (POST) ---
DUMMY Test 1 ................. PASS
UART Loopback Test ........... PASS
POE UART Loopback Test ....... PASS
DRAM Test .................... PASS
Timer Test ................... PASS
Done All Pass.
------------------ DONE ---------------------
(!)Loader Binary checksum error
<ERR> Runtime Loading Fail - System Halt.
This error obviously doesn't look "normal".
When pressing CTRL-U, I get the following screen:
File Name S/Up Type Size Create Time
$logfile_1 0 3 64 1193046:28:15
Factory_Default_Config.cfg 0 5 354 24:01:02
SRW224G4P_SRW248G4P_boot.bix 1 1 1377600 00:01:03
certificate 0 8 18040 24:00:56
startup-config 1 5 5651 25:00:38
startup1.cfg 0 5 5537 24:01:14
Free Space : 5636096
[X]modem Download [D]elete File [S]et Startup File
[Q]uit
Select>
I've tried to update the "SRW224G4P_SRW248G4P_image_v1310.bix" file using Xmodem download, but since I really wasn't sure how to use this boot loader tool, I haven't been successful at doing that, nor do I even know if that's the solution for the problem that I'm having.
Xmodem Receiving Start ::
XMODEM, Successful.
Blocks Received = 7289
Bytes Received = 394480
Errors:
Checksum = 0
Complement = 0
Duplicates = 0
Image downloaded to buffer.
[R]untime
[D]iagnostic
M[u]ltipe Image
[L]oader (Warning: Are you sure what you are doing?)
[Q]uit
Update Image File:r
Runtime Image Filename : SRW224G4P_SRW248G4P_image_v1310.bix
Updating file system.
File system update fail.
I'm guessing that I'll need to contact Cisco tech support, although at least through their web site, they make that nearly impossible to accomplish.
Does anyone have any suggestions on what may have happened to our switch and what I should do to recover? Of course we're about to start a time-critical round of product testing, and without this switch, I'm dead in the water. And it's not like we have a spare 48-port PoE switch lying around.Hello,
I got the same issue. After downloading and uploading the firmware, I got the following result and all LED on the switch are glowing. Could you please help on this issue? Where can I find the right firmware. I also have Image loader 1.0.1.
Xmodem Receiving Start ::
XMODEM, Successful.
Blocks Received = 6b59
Bytes Received = 35ac80
Errors:
Checksum = 0
Complement = 0
Duplicates = 0
Image downloaded to buffer.
[R]untime
[D]iagnostic
M[u]ltipe Image
[L]oader (Warning: Are you sure what you are doing?)
[Q]uit
Update Image File:r
Runtime Image Filename : SRW224G4P_SRW248G4P_image_v1020.bix
Updating file system.
File system update fail.
File Name S/Up Type Size Create Time
All I got now after restarting the switch is:
File Name S/Up Type Size Create Time
Factory_Default_Config.cfg 1 5 354 24:01:02
certificate 0 8 18040 24:00:56
Free Space : 7602176
[X]modem Download [D]elete File [S]et Startup File
[Q]uit
Select>
Thnx in advance. -
SRW224G4P - " ERR Runtime Loading Fail - System Halt"
Hello everyone!
When I power up my switch (SRW224G4P), hyperterminal displays the following output:
Image Loader 1.0.1
Loading Diagnostic Image File : SRW224G4P_SRW248G4P_boot.bix
Diagnostic 1.0.1
* the screen then clears and displays *
User Mode
--- Performing Power-On Self Tests (POST) ---
DUMMY Test 1 ................. PASS
UART Loopback Test ........... PASS
POE UART Loopback Test ....... PASS
DRAM Test .................... PASS
Timer Test ................... PASS
Done All Pass.
------------------ DONE ---------------------
<ERR> Runtime Loading Fail - System Halt.
* no "auto-boot in 2 second" message is displayed *
Does anyone have any ideas what can be done to fix this error?
Message Edited by Vince_02 on 12-14-2009 10:52 AMThe SRW is now part of Cisco Small Business. You better ask your question in the Cisco Small Business Support Community. You'll find Cisco people over there...
-
Bought 30 computers with Windows 7 to replace XP machines. Made the initial install of all the software needed and assigned static ip addresses and to make sure I didn't have any DOA machines.
When reattaching a client computer to the network the server 2008 r2 domain controller, has a hardware fault and halts.
I'm trying to figure out what would cause that to happen. I'm already pulled it and going to re-install windows 7 on it. I'm just want to know what is causing it.
Anyone with an idea why?
Thx,
BillThanks for the reply.
The 7 computer itself isn't freezing. It causes the server to blue screen, "Hardware fault" "System Halted". It happens every time it is turned on while connected to the network.
It has a static IP address. I moved it to another office to test the wiring and it halted the server from that office too. This machine was connected before when I initially set it up with name, IP address and the default software we use and make to make
sure it wasn't DOA.
Needless to say I've taken this machine out of service. I'm going to reinstall Win7 on it and then try it again.
Any other ideas?
Bill -
System halt after installation
Hi,
i installed Solaris 8 2/02 on an SunFire120. After the installation with the "installation cd" the system rebooted and started the "Web Start Launcher in Command Line Mode". After that he wants to install "Additional Software". The status bar is up to 100% at the beginning and then it seems, that the system halted. You cannot execute any commands oder start a cd. You are not in de OS (no prompt).
Does anybody have a solution?Two suggestion you might try:
1. Update your video monitor to the latest version.
2. Put a small delay (around 10 to 100 ms) in all your For and While Loops (including sub VIs). To create a delay, use the the 'Wait' sub VI in the Time & Dialog sub palette. This will force LabVIEW to pause momentarily and let Windows do other stuff....
Chris_Mitchell
Product Development Engineer
Certified LabVIEW Architect -
Hello,
I have a HP Mini 110 Fatal Error System Halted CNU92131LL please help;
Thank YouHi,
Please be aware that this is not supported by HP and you try it at your own risk.
Try entering: e9lo73f3kk ( Note that the 3rd character is a lower case L )
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
I have a passwword check failed fatal error ... system halted CNU9411JR7.Please help me.Thank
Hi, Use the below code to reset e9lov33wbx Or generate one from the below link http://bios-pw.org/
Maybe you are looking for
-
No discount, no prorate when switched to "more everything plan" mid month?
I have switched to the "more everything" plan in the middle of the month. When I received a bill, it turned out that - they backdated the change to the beginning of the billing cycle (I did not ask for it) - they did not give me $25 Edge discount for
-
Podcasts play one at a time?
Last night was the first real night of using my nano since I got my crystal film. So I was listtening to my podcasts while trying to fall asleep and discovered that, unlike with my shuffle, the podcasts on my nano are categorized into individual subs
-
How to download BLOB through JSP
I am able to successfully insert BLOB in a table(ofcourse, Oracle db)..Now my problem is: If a user logs on to a web page and asks to download the .exe file,then, I should select that .exe file from the table(BLOB column) and should be able to downlo
-
Sync iCloud with On My Mac - or merge the two
I have noticed that since upgrading to Lion, ios 5, and switching over from Mobile Me to iCloud, I now have duplicates in my Address Book contacts. I am assuming it is due to the switch to iCloud. Previously, I had my Address Book set to sync with
-
Hi guys, When we run the Payment run - F110 and take the hardcopy of payment advice and cheque an email is triggered and currently my client does not want the email, Please let me know where I can find the configuration for this. 1. I have checked th