System image utility (server 4) failing

iMac (21.5-inch, Late 2012) with Yosemite 10.10.1 won't image with System Image Utility
I'm using a procedure I've done successfully for a long time with Mavericks. Any suggestions, of course, are welcome.
Create NetRestore Image
Initiating NetRestore from installed volume.
Volume Macintosh HD on disk0s2 unmounted
MESSAGE:Preparing imaging engine…
MESSAGE:Reading whole disk (Apple_HFS : 0)…
MESSAGE:   (CRC32 $947173A0: whole disk (Apple_HFS : 0))
MESSAGE:Adding resources…
MESSAGE:Elapsed Time: 16m 37.842s
MESSAGE:File size: 55062652965 bytes, Checksum: CRC32 $94912255
MESSAGE:Sectors processed: 1458433608, 185811721 compressed
MESSAGE:Speed: 90.9Mbytes/sec
MESSAGE:Savings: 92.6%
created: /Users/steve/Desktop/CC2014_oct_Yos_111314.nbi/System.dmg
Volume Macintosh HD on disk0s2 mounted
Volume Recovery HD on disk0s3 mounted
Volume Recovery HD on disk0s3 unmounted
Block checksum: ....10....20....30....40....50....60....70....80....90....100
successfully scanned image "/Users/steve/Desktop/CC2014_oct_Yos_111314.nbi/System.dmg"
created: /Users/steve/Desktop/CC2014_oct_Yos_111314.nbi/NetInstall.dmg
mv: /tmp/mnt.wHfAkTH3/Packages/System.dmg: No space left on device
Execution of 'createRestoreFromSources.sh' failed. Cleaning up.
"disk2" unmounted.
"disk2" ejected.
Failed to create image from restore source.
The operation couldn’t be completed. (System Image Utility error 2.)
Image creation process finished...
Stopping image creation.

iMac (21.5-inch, Late 2012) with Yosemite 10.10.1 won't image with System Image Utility
I'm using a procedure I've done successfully for a long time with Mavericks. Any suggestions, of course, are welcome.
Create NetRestore Image
Initiating NetRestore from installed volume.
Volume Macintosh HD on disk0s2 unmounted
MESSAGE:Preparing imaging engine…
MESSAGE:Reading whole disk (Apple_HFS : 0)…
MESSAGE:   (CRC32 $947173A0: whole disk (Apple_HFS : 0))
MESSAGE:Adding resources…
MESSAGE:Elapsed Time: 16m 37.842s
MESSAGE:File size: 55062652965 bytes, Checksum: CRC32 $94912255
MESSAGE:Sectors processed: 1458433608, 185811721 compressed
MESSAGE:Speed: 90.9Mbytes/sec
MESSAGE:Savings: 92.6%
created: /Users/steve/Desktop/CC2014_oct_Yos_111314.nbi/System.dmg
Volume Macintosh HD on disk0s2 mounted
Volume Recovery HD on disk0s3 mounted
Volume Recovery HD on disk0s3 unmounted
Block checksum: ....10....20....30....40....50....60....70....80....90....100
successfully scanned image "/Users/steve/Desktop/CC2014_oct_Yos_111314.nbi/System.dmg"
created: /Users/steve/Desktop/CC2014_oct_Yos_111314.nbi/NetInstall.dmg
mv: /tmp/mnt.wHfAkTH3/Packages/System.dmg: No space left on device
Execution of 'createRestoreFromSources.sh' failed. Cleaning up.
"disk2" unmounted.
"disk2" ejected.
Failed to create image from restore source.
The operation couldn’t be completed. (System Image Utility error 2.)
Image creation process finished...
Stopping image creation.

Similar Messages

  • System Image Utility: NetInstall creation failed

    Hi all,
    I'm trying to create a NetRestore image.  I'm doing this in 10.6.8 Server. I have a .dmg file which is a clone of the "template" hard drive I set up.  When I create the NetRestore image, it tells me there's no room left on the device.  I'm doing it on a machine with over 350GB of disk space left, so I'm not sure how much space it thinks it needs. below is the output. The dmg file is 49.1GB and contains a disk with a capacity of 159.7GB (110.6GB used).  Below is the output.  Any ideas? Thanks much!
    Jeff
    =====================
    Starting image creation.
    Workflow Started (2014-05-22 08:18:43 -0400)
    Mac OS X Server 10.6.8 (10K549), System Image Utility 10.6.7 (448)
    Starting action: Define Image Source (1.2)
    Finished running action: Define Image Source
    Starting action: Create Image (1.5.4)
    Starting image creation process...
    Create NetInstall Image
    Initiating NetInstall from Restore Media.
    created: /Volumes/Storage/Library/NetBoot/NetBootSP0/20140515-1068-k2user/System.dmg
    Checksumming partition of size 63 blocks...done
    Block checksum: ....10....20....30....40....50....60....70....80....90....100
    File checksum:  ....10....20....30....40....50....60....70....80....90....100
    Reordering:     ....10....20....30....40....50....60....70....80....90....100asr: successfully scanned image "/Volumes/Storage/Library/NetBoot/NetBootSP0/20140515-1068-k2user/System.dmg"
    created: /Volumes/Storage/Library/NetBoot/NetBootSP0/20140515-1068-k2user/NetInstall.dmg
    installer: Package name is SIUExtras
    installer: Installing at base path /private/tmp/mnt.yp2Bxx
    installer: The install was successful.
    mv: /tmp/mnt.yp2Bxx/System/Installation/Packages/System.dmg: No space left on device
    Script is done.
    NetInstall creation failed.
    Image creation process finished...
    Stopping image creation.
    Image creation failed.
    Assistant - Selected source:"NetBoot of Mac HD".
    =====================

    I'm getting the same/similar building a 10.10 NetRestore image. How does one get compression to be nice and reliable?
    Or is there something else I'm missing? I installed 10.10 and 10.10 server/tools the same day, so should be in sync, right? I'm using a procedure I've done successfully for a long time with Mavericks. Any suggestions, of course, are welcome.
    Create NetRestore Image
    Initiating NetRestore from installed volume.
    Volume Macintosh HD on disk0s2 unmounted
    MESSAGE:Preparing imaging engine…
    MESSAGE:Reading whole disk (Apple_HFS : 0)…
    MESSAGE:   (CRC32 $947173A0: whole disk (Apple_HFS : 0))
    MESSAGE:Adding resources…
    MESSAGE:Elapsed Time: 16m 37.842s
    MESSAGE:File size: 55062652965 bytes, Checksum: CRC32 $94912255
    MESSAGE:Sectors processed: 1458433608, 185811721 compressed
    MESSAGE:Speed: 90.9Mbytes/sec
    MESSAGE:Savings: 92.6%
    created: /Users/steve/Desktop/CC2014_oct_Yos_111314.nbi/System.dmg
    Volume Macintosh HD on disk0s2 mounted
    Volume Recovery HD on disk0s3 mounted
    Volume Recovery HD on disk0s3 unmounted
    Block checksum: ....10....20....30....40....50....60....70....80....90....100
    successfully scanned image "/Users/steve/Desktop/CC2014_oct_Yos_111314.nbi/System.dmg"
    created: /Users/steve/Desktop/CC2014_oct_Yos_111314.nbi/NetInstall.dmg
    mv: /tmp/mnt.wHfAkTH3/Packages/System.dmg: No space left on device
    Execution of 'createRestoreFromSources.sh' failed. Cleaning up.
    "disk2" unmounted.
    "disk2" ejected.
    Failed to create image from restore source.
    The operation couldn’t be completed. (System Image Utility error 2.)
    Image creation process finished...
    Stopping image creation.

  • System image utility fails "Unknown error has occurred"

    Hi,
    I can create disk images from 10.8.3 clients but when i'm putting them through system utility on the 10.8 server it fails after hours of running.
    The log is set to debug and shows the image creates upto 83% then jumps to 100% and later shows unknown errors and failed to create image from restore souce.
    I've created several disk images and saved them to different locations on the server as the source and final image.
    Below i've put in the debug log. Someone please help!!
    Workflow Started (2012-01-02 13:56:58 +0000)
    OS X Server 10.8.3 (12D78), System Image Utility 10.8.3 (624)
    Starting action: Define Image Source (1.4)
    Finished running action: Define Image Source
    Starting action: Create Image (1.7.2)
    Starting image creation process...
    Create NetRestore Image
    Initiating NetRestore from installed volume.
    progressPrefix="_progress"
    ++ progressPrefix=_progress
    scriptsDebugKey="DEBUG"
    ++ scriptsDebugKey=DEBUG
    imageIsUDIFKey="1"
    ++ imageIsUDIFKey=1
    imageFormatKey="UDZO"
    ++ imageFormatKey=UDZO
    mountPoint=""
    ++ mountPoint=
    ownershipInfoKey="501:20"
    ++ ownershipInfoKey=501:20
    blockCopyDeviceKey="0"
    ++ blockCopyDeviceKey=0
    dmgTarget="NetInstall"
    ++ dmgTarget=NetInstall
    potentialRecoveryDevice="disk3s3"
    ++ potentialRecoveryDevice=disk3s3
    asrSource="ASRInstall.pkg"
    ++ asrSource=ASRInstall.pkg
    destPath="/Volumes/Macintosh HD/Library/NetBoot/NetBootSP0/NetRestore of Macintosh 10-8_2.nbi"
    ++ destPath='/Volumes/Macintosh HD/Library/NetBoot/NetBootSP0/NetRestore of Macintosh 10-8_2.nbi'
    skipReorderingKey="0"
    ++ skipReorderingKey=0
    sourceVol="/Volumes/Macintosh HD 1"
    ++ sourceVol='/Volumes/Macintosh HD 1'
    postInstallHelperKey="1"
    ++ postInstallHelperKey=1
    . "${1}/createCommon.sh"
    + . /tmp/niutemp.YPRmigsL/createCommon.sh
    # createCommon.sh
    # Common functionality for the Image creation process.
    # sourced in by the various SIU scripts
    # Copyright © 2007-2012 Apple Inc. All rights reserved.
    # Using dscl, create a user account
    AddLocalUser()
    # $1 volume whose local node database to modify
    # $2 long name
    # $3 short name
    # $4 isAdminUser key
    # $5 password data
    # $6 password hint
    # $7 user picture path
    # $8 Language string
    local databasePath="/Local/Default/Users/${3}"
    local targetVol="${1}"
    # Find a free UID between 501 and 599
    for ((i=501; i<600; i++)); do
    output=`/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -search /Local/Default/Users UniqueID $i`
    # If there is already an account dscl returns it, so we're looking for an empty return value.
    if [ "$output" == "" ]; then
    break
    fi
    done
    # Create the user record
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -create $databasePath
    if [ $? != 0 ]; then
    echo "Failed to create '${databasePath}'."
    return 1
    fi
    # Add long name
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath RealName "${2}"
    if [ $? != 0 ]; then
    echo "Failed to set the RealName."
    return 1
    fi
    # Set up the users group information
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath PrimaryGroupID 20
    if [ $? != 0 ]; then
    echo "Failed to set the PrimaryGroupID."
    return 1
    fi
    # Add some additional stuff if the user is an admin
    if [ "${4}" == 1 ]; then
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append "/Local/Default/Groups/admin" GroupMembership "${3}"
    if [ $? != 0 ]; then
    echo "Failed to add the user to the admin group."
    return 1
    fi
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append "/Local/Default/Groups/_appserveradm" GroupMembership "${3}"
    if [ $? != 0 ]; then
    echo "Failed to add the user to the _appserveradm group."
    return 1
    fi
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append "/Local/Default/Groups/_appserverusr" GroupMembership "${3}"
    if [ $? != 0 ]; then
    echo "Failed to add the user to the _appserverusr group."
    return 1
    fi
    fi
    # Add UniqueID
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath UniqueID ${i}
    if [ $? != 0 ]; then
    echo "Failed to set the UniqueID."
    return 1
    fi
    # Add Home Directory entry
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath NFSHomeDirectory /Users/${3}
    if [ $? != 0 ]; then
    echo "Failed to set the NFSHomeDirectory."
    fi
    if [ "${6}" != "" ]; then
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath AuthenticationHint "${6}"
    if [ $? != 0 ]; then
    echo "Failed to set the AuthenticationHint."
    return 1
    fi
    fi
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath picture "${7}"
    if [ $? != 0 ]; then
    echo "Failed to set the picture."
    return 1
    fi
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -passwd $databasePath "${5}"
    if [ $? != 0 ]; then
    echo "Failed to set the passwd."
    return 1
    fi
    # Add shell
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath UserShell "/bin/bash"
    if [ $? != 0 ]; then
    echo "Failed to set the UserShell."
    return 1
    fi
    # Create Home directory
    if [ -e "/System/Library/User Template/${8}.lproj/" ]; then
    /usr/bin/ditto "/System/Library/User Template/${8}.lproj/" "${targetVol}/Users/${3}"
    else
    /usr/bin/ditto "/System/Library/User Template/English.lproj/" "${targetVol}/Users/${3}"
    fi
    if [ $? != 0 ]; then
    echo "Failed to copy the User Template."
    return 1
    fi
    /usr/sbin/chown -R $i:$i "${targetVol}/Users/${3}"
    if [ $? != 0 ]; then
    echo "Failed to set ownership on the User folder."
    return 1
    fi
    # Copies a list of files (full paths contained in the file at $1) from source to the path specified in $2
    CopyEntriesFromFileToPath()
    local theFile="$1"
    local theDest="$2"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    while read FILE
    do
    if [ -e "${FILE}" ]; then
    local leafName=`basename "${FILE}"`
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Copying ${FILE}."
    fi
    /usr/bin/ditto $opt "${FILE}" "${theDest}/${leafName}" || return 1
    fi
    done < "${theFile}"
    return 0
    # Copies a list of packages (full path, destination pairs contained in the file at $1) from source to .../System/Installation/Packages/
    CopyPackagesWithDestinationsFromFile()
    local theFile="$1"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    while read FILE
    do
    if [ -e "${FILE}" ]; then
    local leafName=`basename "${FILE}"`
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Copying ${FILE}."
    fi
    read SUB_PATH
    /usr/bin/ditto $opt "${FILE}" "${mountPoint}/Packages/${SUB_PATH}${leafName}" || return 1
    fi
    done < "${theFile}"
    return 0
    # Create an installer package in ${1} wrapping the supplied script ${2}
    CreateInstallPackageForScript()
    local tempDir="$1"
    local scriptPath="$2"
    local scriptName=`basename "${scriptPath}"`
    local entryDir=`pwd`
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Create installer for script ${scriptName}"
    opt="-v"
    fi
    # shouldn't exist on entry...
    if [ -e "${tempDir}/emptyDir" ]; then
    /bin/rm -rf "${tempDir}/emptyDir"
    fi
    # make some directories to work in
    /bin/mkdir $opt -p "${tempDir}/${scriptName}.pkg/Contents/Resources" || return 1
    /bin/mkdir $opt "${tempDir}/emptyDir" || return 1
    # Create Archive.pax.gz
    cd "${tempDir}/emptyDir"
    /bin/pax -w -x cpio -f "${tempDir}/${scriptName}.pkg/Contents/Archive.pax" .
    /usr/bin/gzip "${tempDir}/${scriptName}.pkg/Contents/Archive.pax"
    cd "${entryDir}"
    # Create the Archive.bom file
    /usr/bin/mkbom "${tempDir}/emptyDir/" "${tempDir}/${scriptName}.pkg/Contents/Archive.bom" || return 1
    # Create the Info.plist
    /bin/cat > "${tempDir}/${scriptName}.pkg/Contents/Info.plist" << END
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>CFBundleIdentifier</key>
    <string>com.apple.SystemImageUtility.${scriptName}</string>
    <key>CFBundleShortVersionString</key>
    <string>1</string>
    <key>IFMajorVersion</key>
    <integer>1</integer>
    <key>IFMinorVersion</key>
    <integer>0</integer>
    <key>IFPkgFlagDefaultLocation</key>
    <string>/tmp</string>
    <key>IFPkgFlagInstallFat</key>
    <false/>
    <key>IFPkgFlagIsRequired</key>
    <false/>
    <key>IFPkgFormatVersion</key>
    <real>0.10000000149011612</real>
    </dict>
    </plist>
    END
    echo "pkmkrpkg1" > "${tempDir}/${scriptName}.pkg/Contents/PkgInfo"
    echo "major: 1\nminor: 0" > "${tempDir}/${scriptName}.pkg/Contents/Resources/package_version"
    # Copy the script
    /bin/cp "$scriptPath" "${tempDir}/${scriptName}.pkg/Contents/Resources/postflight"
    # clean up
    /bin/rm -r "${tempDir}/emptyDir"
    return 0
    # Validate or create the requested directory
    CreateOrValidatePath()
    local targetDir="$1"
    if [ ! -d "${targetDir}" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Creating working path at ${targetDir}"
    fi
    /bin/mkdir -p "${targetDir}" || return 1
    fi
    # If any exist, apply any user accounts
    CreateUserAccounts()
    # $1 volume whose local node database to modify
    local count="${#userFullName[*]}"
    local targetVol="${1}"
    if [ $count -gt 0 ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Adding $count user account(s) to the image"
    fi
    for ((index=0; index<$count; index++)); do
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Adding user ${userFullName[$index]}"
    fi
    #lay down user here
    AddLocalUser "${targetVol}" "${userFullName[$index]}" "${userUnixName[$index]}" "${userIsAdmin[$index]}" "${userPassword[$index]}" "${userPassHint[$index]}" "${userImagePath[$index]}" "${userLanguage[$index]}"
    if [ $? != 0 ]; then
    echo "Failed to create the User '${userUnixName[$index]}'."
    return 1
    fi
    #suppress the Apple ID request
    DisableAppleIDRequestForUser "${targetVol}" "${userUnixName[$index]}"
    done
    # "touch"
    /usr/bin/touch "${targetVol}/private/var/db/.AppleSetupDone"
    /usr/bin/touch "${targetVol}/Library/Receipts/.SetupRegComplete"
    fi
    # retry the hdiutil detach until we either time out or it succeeds
    retry_hdiutil_detach()
    local mount_point="${1}"
    local tries=0
    local forceAt=0
    local limit=24
    local opt=""
    forceAt=$(($limit - 1))
    while [ $tries -lt $limit ]; do
    tries=$(( tries + 1 ))
    /bin/sleep 5
    echo "Attempting to detach the disk image again..."
    /usr/bin/hdiutil detach "${mount_point}" $opt
    if [ $? -ne 0 ]; then
    # Dump a list of any still open files on the mountPoint
    if [ "${scriptsDebugKey}" == "DEBUG" ]; then
    /usr/sbin/lsof +fg "${mount_point}"
    fi
    if [ $tries -eq $forceAt ]; then
    echo "Failed to detach disk image at '${mount_point}' normally, adding -force."
    opt="-force"
    fi
    if [ $tries -eq $limit ]; then
    echo "Failed to detach disk image at '${mount_point}'."
    exit 1
    fi
    else
    tries=$limit
    fi
    done
    # Create the dyld shared cache files
    DetachAndRemoveMount()
    local theMount="${1}"
    local mountLoc=`mount | grep "${theMount}"`
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Detaching disk image"
    # Dump a list of any still open files on the mountPoint
    if [ "${scriptsDebugKey}" == "DEBUG" ]; then
    /usr/sbin/lsof +fg "${theMount}"
    fi
    fi
    # Finally detach the mount (if it's actually mounted) and dispose the mountPoint directory
    if [ "${mountLoc}" != "" ]; then
    /usr/bin/hdiutil detach "${theMount}" || retry_hdiutil_detach "${theMount}" || return 1
    fi
    /bin/rmdir "${theMount}" || return 1
    return 0
    # Turn off the Apple ID request that happens on first boot after installing the OS
    DisableAppleIDRequestForUser()
    local targetUserLib="${1}/Users/${2}/Library"
    # Only do this if the file doesn't exist
    if [ ! -e "${targetUserLib}/Preferences/com.apple.SetupAssistant.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Disabling Apple ID request for user '${2}'"
    fi
    /usr/libexec/PlistBuddy -c "Add :DidSeeCloudSetup bool 1" "${targetUserLib}/Preferences/com.apple.SetupAssistant.plist" > /dev/null 2>&1
    /usr/libexec/PlistBuddy -c "Add :LastSeenCloudProductVersion string 10.8" "${targetUserLib}/Preferences/com.apple.SetupAssistant.plist" > /dev/null 2>&1
    fi
    return 0
    # If the pieces exist, enable remote access for the shell image
    EnableRemoteAccess()
    local srcVol="${1}"
    local opt=""
    if [ -e "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Enabling shell image remote access support"
    opt="-v"
    fi
    # install some things (again which aren't part of BaseSystem) needed for remote ASR installs
    /usr/bin/ditto $opt "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" "${mountPoint}/usr/lib/pam/pam_serialnumber.so.2" || return 1
    if [ -e "${srcVol}/usr/sbin/installer" ]; then
    /usr/bin/ditto $opt "${srcVol}/usr/sbin/installer" "${mountPoint}/usr/sbin/installer" || return 1
    fi
    # copy the sshd config and add our keys to the end of it
    if [ -e "${srcVol}/etc/sshd_config" ]; then
    /bin/cat "${srcVol}/etc/sshd_config" - > "${mountPoint}/etc/sshd_config" << END
    HostKey /private/var/tmp/ssh_host_key
    HostKey /private/var/tmp/ssh_host_rsa_key
    HostKey /private/var/tmp/ssh_host_dsa_key
    END
    fi
    fi
    return 0
    # If it exists, install the sharing names and/or directory binding support to the install image
    HandleNetBootClientHelper()
    local tempDir="${1}"
    local targetVol="${2}"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    if [ -e  "${tempDir}/bindingNames.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Directory Service binding information"
    fi
    /usr/bin/ditto $opt "${tempDir}/bindingNames.plist" "${targetVol}/etc/bindingNames.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/etc/bindingNames.plist"
    /bin/chmod 644 "${targetVol}/etc/bindingNames.plist"
    fi
    if [ -e  "${tempDir}/sharingNames.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Sharing Names support"
    fi
    /usr/bin/ditto $opt "${tempDir}/sharingNames.plist" "${targetVol}/etc/sharingNames.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/etc/sharingNames.plist"
    /bin/chmod 644 "${targetVol}/etc/sharingNames.plist"
    fi
    if [ -e  "${tempDir}/NetBootClientHelper" ]; then
    /usr/bin/ditto $opt "${tempDir}/NetBootClientHelper" "${targetVol}/usr/sbin/NetBootClientHelper" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/usr/sbin/NetBootClientHelper"
    /bin/chmod 555 "${targetVol}/usr/sbin/NetBootClientHelper"
    /usr/bin/ditto $opt "${tempDir}/com.apple.NetBootClientHelper.plist" "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
    /bin/chmod 644 "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
    # finally, make sure it isn't disabled...
    /usr/libexec/PlistBuddy -c "Delete :com.apple.NetBootClientHelper" "${targetVol}/var/db/launchd.db/com.apple.launchd/overrides.plist" > /dev/null 2>&1
    fi
    return 0
    # If any exist, install configuration profiles to the install image
    InstallConfigurationProfiles()
    local tempDir="${1}"
    local targetVol="${2}"
    local profilesDir="${targetVol}/var/db/ConfigurationProfiles"
    if [ -e  "${tempDir}/configProfiles.txt" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Configuration Profiles"
    fi
    /bin/mkdir -p "${profilesDir}/Setup" || return 1
    # Make sure the perms are correct
    /usr/sbin/chown root:wheel "${profilesDir}"
    /bin/chmod 755 "${profilesDir}"
    /usr/sbin/chown root:wheel "${profilesDir}/Setup"
    /bin/chmod 755 "${profilesDir}/Setup"
    /usr/bin/touch "${profilesDir}/.profilesAreInstalled"
    CopyEntriesFromFileToPath "${tempDir}/configProfiles.txt" "${profilesDir}/Setup" || return 1
    # Enable MCX debugging
    if [ 1 == 1 ]; then
    if [ -e  "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" ]; then
    /usr/libexec/PlistBuddy -c "Delete :debugOutput" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
    /usr/libexec/PlistBuddy -c "Delete :collateLogs" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
    fi
    /usr/libexec/PlistBuddy -c "Add :debugOutput string -2" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
    /usr/libexec/PlistBuddy -c "Add :collateLogs string 1" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
    fi
    fi
    # Converts a list of scripts (full paths contained in the file at $1) into packages in $3
    InstallScriptsFromFile()
    local tempDir="${1}"
    local theFile="${2}"
    local targetDir="${3}"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Converting scripts into install packages"
    opt="-v"
    fi
    while read FILE
    do
    if [ -e "${FILE}" ]; then
    # make an installer package out of the script
    CreateInstallPackageForScript "$tempDir" "${FILE}" || return 1
    # copy the resulting package to the Packages directory
    local leafName=`basename "${FILE}"`
    /usr/bin/ditto $opt "${tempDir}/${leafName}.pkg" "${targetDir}/${leafName}.pkg" || return 1
    # clean up
    /bin/rm -r "${tempDir}/${leafName}.pkg"
    fi
    done < "${theFile}"
    return 0
    # Prepare the source by deleting stuff we don't want to copy if sourcing a volume
    PostFlightDestination()
    local tempDir="${1}"
    local destDir="${2}"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Performing post install cleanup"
    opt="-v"
    fi
    # delete the DS indices to force reindexing...
    if [ -e "${mountPoint}/var/db/dslocal/indices/Default/index" ]; then
    /bin/rm $opt "${mountPoint}/var/db/dslocal/indices/Default/index"
    fi
    # detach the disk and remove the mount folder
    DetachAndRemoveMount "${mountPoint}"
    if [ $? != 0 ]; then
    echo "Failed to detach and clean up the mount at '${mountPoint}'."
    return 1
    fi
    echo "Correcting permissions. ${ownershipInfoKey} $destDir"
    /usr/sbin/chown -R "${ownershipInfoKey}" "$destDir"
    # Prepare the source by deleting stuff we don't want to copy if sourcing a volume
    PreCleanSource()
    local srcVol="$1"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    if [ -e "$srcVol/private/var/vm/swapfile*" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Removing swapfiles on $1"
    fi
    /bin/rm $opt "$srcVol/private/var/vm/swapfile*"
    fi
    if [ -e "$srcVol/private/var/vm/sleepimage" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Removing sleepimage on $1"
    fi
    /bin/rm $opt "$srcVol/private/var/vm/sleepimage"
    fi
    if [ -d "$srcVol/private/tmp" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out /private/tmp on $1"
    fi
    /bin/rm -r $opt "$srcVol/private/tmp/*" > /dev/null 2>&1
    fi
    if [ -d "$srcVol/private/var/tmp" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out /private/var/tmp on $1"
    fi
    /bin/rm -r $opt "$srcVol/private/var/tmp/*" > /dev/null 2>&1
    fi
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out devices and volumes on $1"
    fi
    if [ -d "$srcVol/Volumes" ]; then
    /bin/rm -r $opt "$srcVol/Volumes/*" > /dev/null 2>&1
    fi
    if [ -d "$srcVol/dev" ]; then
    /bin/rm $opt "$srcVol/dev/*" > /dev/null 2>&1
    fi
    if [ -d "$srcVol/private/var/run" ]; then
    /bin/rm -r $opt "$srcVol/private/var/run/*" > /dev/null 2>&1
    fi
    # Copy kernel and build the kext cache on the boot image
    PrepareKernelAndKextCache()
    local srcDir="$1"
    local destDir="$2"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Preparing the kernel and kext cache for the boot image"
    opt="-v"
    fi
    # Insure the kext cache on our source volume (the boot shell) is up to date
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Updating kext cache on source volume"
    fi
    /usr/sbin/kextcache -update-volume "${srcDir}" || return 1
    # Copy the i386 and, if it exists, the x86_64 architecture
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing the kext cache to the boot image"
    fi
    # make sure this doesn't exist
    if [ -e "${destDir}/i386" ]; then
    /bin/rm -rf "${destDir}/i386"
    fi
    # Install kextcaches to the nbi folder
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Creating a kernelcache for the boot shell"
    fi
    /bin/mkdir -p $opt "${destDir}/i386/x86_64" || return 1
    /usr/sbin/kextcache -arch x86_64 -L -N -S -z -K "${srcDir}/mach_kernel" -c "${destDir}/i386/x86_64/kernelcache" "${srcDir}/System/Library/Extensions" || return 1

    I am seeing a very similar output trying to make a netrestore image of a 10.8.4 Macbook Air on a 10.8.4 Mac Mini running OSX Server.  Gets to 84% and then shows the -1 progress and then just hangs until I cancel it (I haven't tried leaving it over night but left it that way for hours).
    Did you ever figure out what was going on or have a workaround to create an image?
    Thanks!

  • System Image Utility always fails, why?

    Hi everyone,
    on my clean and fresh install of 10.7.4 Server the System Image Utility always fails to create an image. I want to create a NetInstall image and have put the OS X Lion Installer in /Applications. I can select it in SIU and choose to create a NetInstall image. It asks for the admin pw and always presents an error at the very end: Image creation failed. An unknown error has occured.
    If I select to create a NetBoot image instead it fails directly after clicking on the Create button with this slightly different message: Image creation failed. An error has occured. At least it’s no unknown error…
    Any ideas what might be causing this? I have succesfully created NetInstall images with 10.6 Server and 10.8 Server, but 10.7 Server somehow won’t play nice.
    Thanks
    Björn

    Hi Brian,
    I first deleted the Installer and redownloaded it from the App Store, just to make sure there was no problem with it. Even though I now have the 10.7.4 Installer (had 10.7.0 before) nothing has changed. I then went on to set the log level as suggested. I now get different errors based on the chosen log level.
    Log level set to debug:
    Image creation failed.
    *** -[__NSArrayM insertObject:atIndex:]: object cannot be nil
    Log level set to verbose:
    Image creation failed.
    An unknown error has occurred.
    I did not see anything helpful in the logs unfortunately. The only noticeable thing mentioned was: Failed to create image from installer media.
    Any additional ideas? I will attach both logs here, just in case.
    VERBOSE LOG:
    Starting image creation.
    Workflow Started (2012-09-08 14:08:00 +0200)
    Mac OS X Server 10.7.4 (11E53), System Image Utility 10.7.3 (543)
    Starting action: Define Image Source (1.3)
    Finished running action: Define Image Source
    Starting action: Create Image (1.6.2)
    Starting image creation process...
    Create NetInstall Image
    Initiating NetInstall from Installer media.
    Creating working path at /Users/vm/Desktop/NetInstall of Install Mac OS X Lion
    Creating disk image (Size: 4062 MB)
    Finalizing disk image.
    created: /Users/vm/Desktop/NetInstall of Install Mac OS X Lion/NetInstall.dmg
    Attaching disk image
    Copying /Volumes/Mac OS X Install ESD
    Preparing the kernel and boot loader for the boot image
    /Users/vm/Desktop/NetInstall of Install Mac OS X Lion/i386
    /Users/vm/Desktop/NetInstall of Install Mac OS X Lion/i386/x86_64
    Copying /Volumes/Mac OS X Install ESD/boot.efi
    Copying /Volumes/Mac OS X Install ESD/System/Library/CoreServices/PlatformSupport.plist
    Performing post install cleanup
    Detaching disk image
    "disk4" unmounted.
    "disk4" ejected.
    Correcting permissions. 501:20 /Users/vm/Desktop/NetInstall of Install Mac OS X Lion
    Script is done.
    Failed to create image from installer media.
    An unknown error has occurred.
    NetInstall creation failed.
    Image creation process finished...
    Stopping image creation.
    Image creation failed.
    DEBUG LOG:
    Starting image creation.
    Workflow Started (2012-09-08 13:59:22 +0200)
    Mac OS X Server 10.7.4 (11E53), System Image Utility 10.7.3 (543)
    Starting action: Define Image Source (1.3)
    Finished running action: Define Image Source
    Starting action: Create Image (1.6.2)
    Starting image creation process...
    Create NetInstall Image
    Initiating NetInstall from Installer media.
    progressPrefix="_progress"
    ++ progressPrefix=_progress
    scriptsDebugKey="DEBUG"
    ++ scriptsDebugKey=DEBUG
    imageIsUDIFKey="1"
    ++ imageIsUDIFKey=1
    mountPoint=""
    ++ mountPoint=
    ownershipInfoKey="501:20"
    ++ ownershipInfoKey=501:20
    destVolFSType="HFS+"
    ++ destVolFSType=HFS+
    installSource="/Volumes/Mac OS X Install ESD"
    ++ installSource='/Volumes/Mac OS X Install ESD'
    dmgTarget="NetInstall"
    ++ dmgTarget=NetInstall
    destPath="/Users/vm/Desktop/NetInstall of Install Mac OS X Lion"
    ++ destPath='/Users/vm/Desktop/NetInstall of Install Mac OS X Lion'
    dmgVolName="NetInstall"
    ++ dmgVolName=NetInstall
    . "${1}/createCommon.sh"
    + . /tmp/niutemp.Yv8Z6Mqx/createCommon.sh
    # createCommon.sh
    # Common functionality for the Image creation process.
    # sourced in by the various SIU scripts
    # Copyright © 2007-2011 Apple Inc. All rights reserved.
    # Using dscl, create a user account
    AddLocalUser()
    # $1 volume whose local node database to modify
    # $2 long name
    # $3 short name
    # $4 isAdminUser key
    # $5 password data
    # $6 password hint
    # $7 user picture path
    # $8 Language string
    local databasePath="/Local/Default/Users/${3}"
    local targetVol="${1}"
    # Find a free UID between 501 and 599
    for ((i=501; i<600; i++)); do
    output=`/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -search /Local/Default/Users UniqueID $i`
    # If there is already an account dscl returns it, so we're looking for an empty return value.
    if [ "$output" == "" ]; then
    break
    fi
    done
    # Create the user record
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -create $databasePath
    if [ $? != 0 ]; then
    echo "Failed to create '${databasePath}'."
    return 1
    fi
    # Add long name
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath RealName "${2}"
    if [ $? != 0 ]; then
    echo "Failed to set the RealName."
    return 1
    fi
    # Add PrimaryGroupID
    if [ "${4}" == 1 ]; then
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath PrimaryGroupID 80
    else
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath PrimaryGroupID 20
    fi
    if [ $? != 0 ]; then
    echo "Failed to set the PrimaryGroupID."
    return 1
    fi
    # Add UniqueID
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath UniqueID ${i}
    if [ $? != 0 ]; then
    echo "Failed to set the UniqueID."
    return 1
    fi
    # Add Home Directory entry
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath NFSHomeDirectory /Users/${3}
    if [ $? != 0 ]; then
    echo "Failed to set the NFSHomeDirectory."
    fi
    if [ "${6}" != "" ]; then
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath AuthenticationHint "${6}"
    if [ $? != 0 ]; then
    echo "Failed to set the AuthenticationHint."
    return 1
    fi
    fi
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath picture "${7}"
    if [ $? != 0 ]; then
    echo "Failed to set the picture."
    return 1
    fi
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -passwd $databasePath "${5}"
    if [ $? != 0 ]; then
    echo "Failed to set the passwd."
    return 1
    fi
    # Add shell
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath UserShell "/bin/bash"
    if [ $? != 0 ]; then
    echo "Failed to set the UserShell."
    return 1
    fi
    # Create Home directory
    if [ -e "/System/Library/User Template/${8}.lproj/" ]; then
    /usr/bin/ditto "/System/Library/User Template/${8}.lproj/" "${targetVol}/Users/${3}"
    else
    /usr/bin/ditto "/System/Library/User Template/English.lproj/" "${targetVol}/Users/${3}"
    fi
    if [ $? != 0 ]; then
    echo "Failed to copy the User Template."
    return 1
    fi
    /usr/sbin/chown -R $i:$i "${targetVol}/Users/${3}"
    if [ $? != 0 ]; then
    echo "Failed to set ownership on the User folder."
    return 1
    fi
    # Copies a list of files (full paths contained in the file at $1) from source to the path specified in $2
    CopyEntriesFromFileToPath()
    local theFile="$1"
    local theDest="$2"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    while read FILE
    do
    if [ -e "${FILE}" ]; then
    local leafName=`basename "${FILE}"`
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Copying ${FILE}."
    fi
    /usr/bin/ditto $opt "${FILE}" "${theDest}/${leafName}" || return 1
    fi
    done < "${theFile}"
    return 0
    # Copies a list of packages (full path, destination pairs contained in the file at $1) from source to .../System/Installation/Packages/
    CopyPackagesWithDestinationsFromFile()
    local theFile="$1"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    while read FILE
    do
    if [ -e "${FILE}" ]; then
    local leafName=`basename "${FILE}"`
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Copying ${FILE}."
    fi
    read SUB_PATH
    /usr/bin/ditto $opt "${FILE}" "${mountPoint}/Packages/${SUB_PATH}${leafName}" || return 1
    fi
    done < "${theFile}"
    return 0
    # Create an installer package in ${1} wrapping the supplied script ${2}
    CreateInstallPackageForScript()
    local tempDir="$1"
    local scriptPath="$2"
    local scriptName=`basename "${scriptPath}"`
    local entryDir=`pwd`
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Create installer for script ${scriptName}"
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    fi
    # shouldn't exist on entry...
    if [ -e "${tempDir}/emptyDir" ]; then
    /bin/rm -rf "${tempDir}/emptyDir"
    fi
    # make some directories to work in
    /bin/mkdir $opt -p "${tempDir}/${scriptName}.pkg/Contents/Resources" || return 1
    /bin/mkdir $opt "${tempDir}/emptyDir" || return 1
    # Create Archive.pax.gz
    cd "${tempDir}/emptyDir"
    /bin/pax -w -x cpio -f "${tempDir}/${scriptName}.pkg/Contents/Archive.pax" .
    /usr/bin/gzip "${tempDir}/${scriptName}.pkg/Contents/Archive.pax"
    cd "${entryDir}"
    # Create the Archive.bom file
    /usr/bin/mkbom "${tempDir}/emptyDir/" "${tempDir}/${scriptName}.pkg/Contents/Archive.bom" || return 1
    # Create the Info.plist
    /bin/cat > "${tempDir}/${scriptName}.pkg/Contents/Info.plist" << END
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>CFBundleIdentifier</key>
    <string>com.apple.server.SystemImageUtility.${scriptName}</string>
    <key>CFBundleShortVersionString</key>
    <string>1</string>
    <key>IFMajorVersion</key>
    <integer>1</integer>
    <key>IFMinorVersion</key>
    <integer>0</integer>
    <key>IFPkgFlagDefaultLocation</key>
    <string>/tmp</string>
    <key>IFPkgFlagInstallFat</key>
    <false/>
    <key>IFPkgFlagIsRequired</key>
    <false/>
    <key>IFPkgFormatVersion</key>
    <real>0.10000000149011612</real>
    </dict>
    </plist>
    END
    echo "pkmkrpkg1" > "${tempDir}/${scriptName}.pkg/Contents/PkgInfo"
    echo "major: 1\nminor: 0" > "${tempDir}/${scriptName}.pkg/Contents/Resources/package_version"
    # Copy the script
    /bin/cp "$scriptPath" "${tempDir}/${scriptName}.pkg/Contents/Resources/postflight"
    # clean up
    /bin/rm -r "${tempDir}/emptyDir"
    return 0
    # Validate or create the requested directory
    CreateOrValidatePath()
    local targetDir="$1"
    if [ ! -d "${targetDir}" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Creating working path at ${targetDir}"
    fi
    /bin/mkdir -p "${targetDir}" || return 1
    fi
    # If any exist, apply any user accounts
    CreateUserAccounts()
    # $1 volume whose local node database to modify
    local count="${#userFullName[*]}"
    local targetVol="${1}"
    if [ $count -gt 0 ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Adding $count user account(s) to the image"
    fi
    for ((index=0; index<$count; index++)); do
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Adding user ${userFullName[$index]}"
    fi
    #lay down user here
    AddLocalUser "${targetVol}" "${userFullName[$index]}" "${userUnixName[$index]}" "${userIsAdmin[$index]}" "${userPassword[$index]}" "${userPassHint[$index]}" "${userImagePath[$index]}" "${userLanguage[$index]}"
    if [ $? != 0 ]; then
    echo "Failed to create the User '${userUnixName[$index]}'."
    return 1
    fi
    done
    # "touch"
    /usr/bin/touch "${targetVol}/private/var/db/.AppleSetupDone"
    /usr/bin/touch "${targetVol}/Library/Receipts/.SetupRegComplete"
    fi
    # retry the hdiutil detach until we either time out or it succeeds
    retry_hdiutil_detach()
    local mount_point="${1}"
    local tries=0
    local forceAt=0
    local limit=24
    local opt=""
    forceAt=$(($limit - 1))
    while [ $tries -lt $limit ]; do
    tries=$(( tries + 1 ))
    /bin/sleep 5
    echo "Attempting to detach the disk image again..."
    /usr/bin/hdiutil detach "${mount_point}" $opt
    if [ $? -ne 0 ]; then
    # Dump a list of any still open files on the mountPoint
    if [ "${scriptsDebugKey}" == "DEBUG" ]; then
    /usr/sbin/lsof +fg "${mount_point}"
    fi
    if [ $tries -eq $forceAt ]; then
    echo "Failed to detach disk image at '${mount_point}' normally, adding -force."
    opt="-force"
    fi
    if [ $tries -eq $limit ]; then
    echo "Failed to detach disk image at '${mount_point}'."
    exit 1
    fi
    else
    tries=$limit
    fi
    done
    # Create the dyld shared cache files
    DetachAndRemoveMount()
    local theMount="${1}"
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Detaching disk image"
    # Dump a list of any still open files on the mountPoint
    if [ "${scriptsDebugKey}" == "DEBUG" ]; then
    /usr/sbin/lsof +fg "${theMount}"
    fi
    fi
    # Finally detach the image and dispose the mountPoint directory
    /usr/bin/hdiutil detach "${theMount}" || retry_hdiutil_detach "${theMount}" || return 1
    /bin/rmdir "${theMount}" || return 1
    return 0
    # If the pieces exist, enable remote access for the shell image
    EnableRemoteAccess()
    local srcVol="${1}"
    local opt=""
    if [ -e "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Enabling shell image remote access support"
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    fi
    # install some things (again which aren't part of BaseSystem) needed for remote ASR installs
    /usr/bin/ditto $opt "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" "${mountPoint}/usr/lib/pam/pam_serialnumber.so.2" || return 1
    if [ -e "${srcVol}/usr/sbin/installer" ]; then
    /usr/bin/ditto $opt "${srcVol}/usr/sbin/installer" "${mountPoint}/usr/sbin/installer" || return 1
    fi
    # copy the sshd config and add our keys to the end of it
    if [ -e "${srcVol}/etc/sshd_config" ]; then
    /bin/cat "${srcVol}/etc/sshd_config" - > "${mountPoint}/etc/sshd_config" << END
    HostKey /private/var/tmp/ssh_host_key
    HostKey /private/var/tmp/ssh_host_rsa_key
    HostKey /private/var/tmp/ssh_host_dsa_key
    END
    fi
    fi
    return 0
    # If it exists, install the sharing names and/or directory binding support to the install image
    HandleNetBootClientHelper()
    local tempDir="${1}"
    local targetVol="${2}"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    if [ -e  "${tempDir}/bindingNames.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Directory Service binding information"
    fi
    /usr/bin/ditto $opt "${tempDir}/bindingNames.plist" "${targetVol}/etc/bindingNames.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/etc/bindingNames.plist"
    /bin/chmod 644 "${targetVol}/etc/bindingNames.plist"
    fi
    if [ -e  "${tempDir}/sharingNames.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Sharing Names support"
    fi
    /usr/bin/ditto $opt "${tempDir}/sharingNames.plist" "${targetVol}/etc/sharingNames.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/etc/sharingNames.plist"
    /bin/chmod 644 "${targetVol}/etc/sharingNames.plist"
    fi
    if [ -e  "${tempDir}/NetBootClientHelper" ]; then
    /usr/bin/ditto $opt "${tempDir}/NetBootClientHelper" "${targetVol}/usr/sbin/NetBootClientHelper" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/usr/sbin/NetBootClientHelper"
    /bin/chmod 555 "${targetVol}/usr/sbin/NetBootClientHelper"
    /usr/bin/ditto $opt "${tempDir}/com.apple.NetBootClientHelper.plist" "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
    /bin/chmod 644 "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
    # finally, make sure it isn't disabled...
    /usr/libexec/PlistBuddy -c "Delete :com.apple.NetBootClientHelper" "${targetVol}/var/db/launchd.db/com.apple.launchd/overrides.plist" > /dev/null 2>&1
    fi
    return 0
    # If any exist, install configuration profiles to the install image
    InstallConfigurationProfiles()
    local tempDir="${1}"
    local targetVol="${2}"
    local profilesDir="${targetVol}/var/db/ConfigurationProfiles"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    if [ -e  "${tempDir}/configProfiles.txt" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Configuration Profiles"
    fi
    /bin/mkdir -p "${profilesDir}/Setup" || return 1
    # Make sure the perms are correct
    /usr/sbin/chown root:wheel "${profilesDir}"
    /bin/chmod 755 "${profilesDir}"
    /usr/sbin/chown root:wheel "${profilesDir}/Setup"
    /bin/chmod 755 "${profilesDir}/Setup"
    /usr/bin/touch "${profilesDir}/.profilesAreInstalled"
    CopyEntriesFromFileToPath "${tempDir}/configProfiles.txt" "${profilesDir}/Setup" || return 1
    # Enable MCX debugging
    if [ 1 == 1 ]; then
    if [ -e  "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" ]; then
    /usr/libexec/PlistBuddy -c "Delete :debugOutput" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
    /usr/libexec/PlistBuddy -c "Delete :collateLogs" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
    fi
    /usr/libexec/PlistBuddy -c "Add :debugOutput string -2" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
    /usr/libexec/PlistBuddy -c "Add :collateLogs string 1" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
    fi
    fi
    # Converts a list of scripts (full paths contained in the file at $1) into packages in $3
    InstallScriptsFromFile()
    local tempDir="${1}"
    local theFile="${2}"
    local targetDir="${3}"
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Converting scripts into install packages"
    fi
    while read FILE
    do
    if [ -e "${FILE}" ]; then
    # make an installer package out of the script
    CreateInstallPackageForScript "$tempDir" "${FILE}" || return 1
    # copy the resulting package to the Packages directory
    local leafName=`basename "${FILE}"`
    /usr/bin/ditto $opt "${tempDir}/${leafName}.pkg" "${targetDir}/${leafName}.pkg" || return 1
    # clean up
    /bin/rm -r "${tempDir}/${leafName}.pkg"
    fi
    done < "${theFile}"
    return 0
    # Prepare the source by deleting stuff we don't want to copy if sourcing a volume
    PostFlightDestination()
    local tempDir="${1}"
    local destDir="${2}"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Performing post install cleanup"
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
    opt="-v"
    fi
    fi
    # delete the DS indices to force reindexing...
    if [ -e "${mountPoint}/var/db/dslocal/indices/Default/index" ]; then
    /bin/rm $opt "${mountPoint}/var/db/dslocal/indices/Default/index"
    fi
    # detach the disk and remove the mount folder
    DetachAndRemoveMount "${mountPoint}"
    if [ $? != 0 ]; then
    echo "Failed to detach and clean up the mount at '${mountPoint}'."
    return 1
    fi
    echo "Correcting permissions. ${ownershipInfoKey} $destDir"
    /usr/sbin/chown -R "${ownershipInfoKey}" "$destDir"
    # Prepare the source by deleting stuff we don't want to copy if sourcing a volume
    PreCleanSource()
    local srcVol="$1"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
    opt="-v"
    fi
    fi
    if [ -e "$srcVol/private/var/vm/swapfile*" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Removing swapfiles on $1"
    fi
    /bin/rm $opt "$srcVol/private/var/vm/swapfile*"
    fi
    if [ -d "$srcVol/private/tmp" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out /private/tmp on $1"
    fi
    /bin/rm -r $opt "$srcVol/private/tmp/*"
    fi
    if [ -d "$srcVol/private/var/tmp" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out /private/var/tmp on $1"
    fi
    /bin/rm -r $opt "$srcVol/private/var/tmp/*"
    fi
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out devices and volumes on $1"
    fi
    if [ -d "$srcVol/Volumes" ]; then
    /bin/rm -r $opt "$srcVol/Volumes/*"
    fi
    if [ -d "$srcVol/dev" ]; then
    /bin/rm $opt "$srcVol/dev/*"
    fi
    if [ -d "$srcVol/private/var/run" ]; then
    /bin/rm -r $opt "$srcVol/private/var/run/*"
    fi
    # Copy kernel and build the kext cache on the boot image
    PrepareKernelAndKextCache()
    local srcDir="$1"
    local destDir="$2"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Preparing the kernel and kext cache for t          /bin/rmdir "${theMount}" || return 1
    return 0
    # If the pieces exist, enable remote access for the shell image
    EnableRemoteAccess()
    local srcVol="${1}"
    local opt=""
    if [ -e "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Enabling shell image remote access support"
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    fi
    # install some things (again which aren't part of BaseSystem) needed for remote ASR installs
    /usr/bin/ditto $opt "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" "${mountPoint}/usr/lib/pam/pam_serialnumber.so.2" || return 1
    if [ -e "${srcVol}/usr/sbin/installer" ]; then
    /usr/bin/ditto $opt "${srcVol}/usr/sbin/installer" "${mountPoint}/usr/sbin/installer" || return 1
    fi
    # copy the sshd config and add our keys to the end of it
    if [ -e "${srcVol}/etc/sshd_config" ]; then
    /bin/cat "${srcVol}/etc/sshd_config" - > "${mountPoint}/etc/sshd_config" << END
    HostKey /private/var/tmp/ssh_host_key
    HostKey /private/var/tmp/ssh_host_rsa_key
    HostKey /private/var/tmp/ssh_host_dsa_key
    END
    fi
    fi
    return 0
    # If it exists, install the sharing names and/or directory binding support to the install image
    HandleNetBootClientHelper()
    local tempDir="${1}"
    local targetVol="${2}"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    if [ -e  "${tempDir}/bindingNames.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Directory Service binding information"
    fi
    /usr/bin/ditto $opt "${tempDir}/bindingNames.plist" "${targetVol}/etc/bindingNames.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/etc/bindingNames.plist"
    /bin/chmod 644 "${targetVol}/etc/bindingNames.plist"
    fi
    if [ -e  "${tempDir}/sharingNames.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Sharing Names support"
    fi
    /usr/bin/ditto $opt "${tempDir}/sharingNames.plist" "${targetVol}/etc/sharingNames.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/etc/sharingNames.plist"
    /bin/chmod 644 "${targetVol}/etc/sharingNames.plist"
    fi
    if [ -e  "${tempDir}/NetBootClientHelper" ]; then
    /usr/bin/ditto $opt "${tempDir}/NetBootClientHelper" "${targetVol}/usr/sbin/NetBootClientHelper" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/usr/sbin/NetBootClientHelper"
    /bin/chmod 555 "${targetVol}/usr/sbin/NetBootClientHelper"
    /usr/bin/ditto $opt "${tempDir}/com.apple.NetBootClientHelper.plist" "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
    /bin/chmod 644 "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
    # finally, make sure it isn't disabled...
    /usr/libexmountPoint=`mktemp -d "/tmp/mnt.XXXXXXXX"`
    errExit()
    echo "Execution of '`basename ${0}`' failed. Cleaning up."
    # detach the disk and remove the mount folder
    DetachAndRemoveMount "${mountPoint}"
    /bin/rm -r "${destPath}"
    exit 1
    # Set up for script debugging
    debug_opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
    debug_opt="-v"
    fi
    # Prepare the destination
    CreateOrValidatePath "$destPath" || errExit
    # update progress information
    echo "${progressPrefix}_creatingImage_"
    if [ -e "${installSource}/BaseSystem.dmg" ]; then
    size=$2
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
    echo "Creating disk image (Size: $size MB)"
    fi
    /usr/bin/hdiutil create "$destPath/$dmgTarget" -megabytes $size -volname "${dmgVolName}" -uid 0 -gid 80 -mode 1775 -layout "SPUD" -fs "$destVolFSType" -stretch 500g -ov -puppetstrings || errExit
    echo "${progressPrefix}_copyingSource_"
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
    echo "Attaching disk image"
    fi
    /usr/bin/hdiutil attach "${destPath}/${dmgTarget}.dmg" -owners on -nobrowse -noautoopen -mountpoint "${mountPoint}" -quiet || errExit
    # Copy source Volume base system to
    /usr/bin/ditto $debug_opt "${installSource}" "${mountPoint}" || errExit
    else
    echo "This does not appear to be a Mac OS X Install DVD."
    errExit
    fi
    # If adding any additional packages or scripts
    if [ -e "${1}/OSInstall.collection" ]; then
    /usr/bin/ditto $debug_opt "${1}/OSInstall.collection" "${mountPoint}/Packages/OSInstall.collection" || errExit
    /usr/sbin/chown root:wheel "${mountPoint}/Packages/OSInstall.collection"
    # If adding any additional packages
    if [ -e "${1}/additionalPackages.txt" ]; then
    CopyPackagesWithDestinationsFromFile "${1}/additionalPackages.txt" || errExit
    fi
    # If adding any scripts
    if [ -e "${1}/additionalScripts.txt" ]; then
    InstallScriptsFromFile "${1}" "${1}/additionalScripts.txt" "${mountPoint}/Packages" || errExit
    fi
    fi
    # If it exists, install the partition data onto the install image
    ProcessAutoPartition "${1}" || errExit
    # If it exists, install minstallconfig.xml (AutoInstall data) onto the install image
    ProcessMinInstall "${1}" || errExit
    # update progress information
    echo "${progressPrefix}_buildingBooter_"
    # Copy kernel and boot loader
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Preparing the kernel and boot loader for the boot image"
    fi
    # make sure this doesn't exist
    if [ -e "${destPath}/i386" ]; then
    /bin/rm -rf "${destPath}/i386"
    fi
    /bin/mkdir -p $debug_opt "${destPath}/i386/x86_64" || errExit
    # copy these directly off the install media
    /usr/bin/ditto $debug_opt "${installSource}/boot.efi" "${destPath}/i386/booter" || errExit
    /usr/bin/chflags nohidden "${destPath}/i386/booter"
    # Grab the relevant portion of the com.apple.Boot.plist
    kernelFlags=`/usr/libexec/PlistBuddy -c "print :'Kernel Flags'" "${installSource}/Library/Preferences/SystemConfiguration/com.apple.Boot.plist"`
    /usr/libexec/PlistBuddy -c "add :'Kernel Flags' string ${kernelFlags}" "${destPath}/i386/com.apple.Boot.plist" > /dev/null 2>&1
    /usr/bin/ditto $debug_opt "${installSource}/System/Library/CoreServices/PlatformSupport.plist" "${destPath}/i386/PlatformSupport.plist" || errExit
    # extract the kernel & kernelcache for the boot shell
    /usr/bin/lipo -extract i386 "${mountPoint}/kernelcache" -output "${destPath}/i386/kernelcache" || errExit
    /usr/bin/lipo -extract x86_64 "${mountPoint}/kernelcache" -output "${destPath}/i386/x86_64/kernelcache" || errExit
    # Apply choice changes, if any
    if [ -e "${1}/MacOSXInstaller.choiceChanges" ]; then
    echo "Copy over package choice selection."
    /usr/bin/ditto $debug_opt "${1}/MacOSXInstaller.choiceChanges" "${mountPoint}/Packages/Extras/MacOSXInstaller.choiceChanges"
    fi
    # update progress information
    echo "${progressPrefix}_finishingUp_"
    # perform the final cleanup
    PostFlightDestination "${1}" "$destPath" || errExit
    errExit
    Vol/private/tmp" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out /private/tmp on $1"
    fi
    /bin/rm -r $opt "$srcVol/private/tmp/*"
    fi
    if [ -d "$srcVol/private/var/tmp" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out /private/var/tmp on $1"
    fi
    /bin/rm -r $opt "$srcVol/private/var/tmp/*"
    fi
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out devices and volumes on $1"
    fi
    if [ -d "$srcVol/Volumes" ]; then
    /bin/rm -r $opt "$srcVol/Volumes/*"
    fi
    if [ -d "$srcVol/dev" ]; then
    /bin/rm $opt "$srcVol/dev/*"
    fi
    if [ -d "$srcVol/private/var/run" ]; then
    /bin/rm -r $opt "$srcVol/private/var/run/*"
    fi
    # Copy kernel and build the kext cache on the boot image
    PrepareKernelAndKextCache()
    local srcDir="$1"
    local destDir="$2"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Preparing the kernel and kext cache for tPERCENT:0.000000
    PERCENT:4.332841
    PERCENT:8.985722
    PERCENT:12.358444
    PERCENT:14.524864
    PERCENT:16.617430
    PERCENT:19.522402
    PERCENT:21.614967
    PERCENT:23.535204
    PERCENT:26.070902
    PERCENT:29.271296
    PERCENT:33.111767
    PERCENT:38.847858
    PERCENT:42.343674
    PERCENT:44.707043
    PERCENT:46.578041
    PERCENT:49.138355
    PERCENT:51.772526
    PERCENT:55.563763
    PERCENT:58.567207
    PERCENT:62.210735
    PERCENT:64.795670
    PERCENT:69.719353
    PERCENT:74.741508
    PERCENT:77.055641
    PERCENT:79.591331
    PERCENT:83.013290
    PERCENT:85.548988
    PERCENT:88.010834
    PERCENT:91.728210
    PERCENT:97.710487
    PERCENT:100.000000
    PERCENT:-1.000000
    Finalizing disk image.
    created: /Users/vm/Desktop/NetInstall of Install Mac OS X Lion/NetInstall.dmg
    /bin/rmdir "${theMount}" || return 1
    return 0
    # If the pieces exist, enable remote access for the shell image
    EnableRemoteAccess()
    local srcVol="${1}"
    local opt=""
    if [ -e "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Enabling shell image remote access support"
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    fi
    # install some things (again which aren't part of BaseSystem) needed for remote ASR installs
    /usr/bin/ditto $opt "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" "${mountPoint}/usr/lib/pam/pam_serialnumber.so.2" || return 1
    if [ -e "${srcVol}/usr/sbin/installer" ]; then
    /usr/bin/ditto $opt "${srcVol}/usr/sbin/installer" "${mountPoint}/usr/sbin/installer" || return 1
    fi
    # copy the sshd config and add our keys to the end of it
    if [ -e "${srcVol}/etc/sshd_config" ]; then
    /bin/cat "${srcVol}/etc/sshd_config" - > Creating working path at /Users/vm/Desktop/NetInstall of Install Mac OS X Lion
    Creating disk image (Size: 4062 MB)
    /tmp/ssh_host_dsa_key
    END
    fi
    fi
    return 0
    # If it exists, install the sharing names and/or directory binding support to the install image
    HandleNetBootClientHelper()
    local tempDir="${1}"
    local targetVol="${2}"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    if [ -e  "${tempDir}/bindingNames.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Directory Service binding information"
    fi
    /usr/bin/ditto $opt "${tempDir}/bindingNames.plist" "${targetVol}/etc/bindingNames.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/etc/bindingNames.plist"
    /bin/chmod 644 "${targetVol}/etc/bindingNames.plist"
    fi
    if [ -e  "${tempDir}/sharingNames.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Sharing Names support"
    fi
    /usr/bin/ditto $opt "${tempDir}/sharingNames.plist" "${targetVol}/etc/sharingNames.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/etc/sharingNames.plist"
    /bin/chmod 644 "${targetVol}/etc/sharingNames.plist"
    fi
    if [ -e  "${tempDir}/NetBootClientHelper" ]; then
    /usr/bin/ditto $opt "${tempDir}/NetBootClientHelper" "${targetVol}/usr/sbin/NetBootClientHelper" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/usr/sbin/NetBootClientHelper"
    /bin/chmod 555 "${targetVol}/usr/sbin/NetBootClientHelper"
    /usr/bin/ditto $opt "${tempDir}/com.apple.NetBootClientHelper.plist" "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
    /bin/chmod 644 "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
    # finally, make sure it isn't disabled...
    /usr/libex
    # update progress information
    echo "${progressPrefix}_creatingImage_"
    if [ -e "${installSource}/BaseSystem.dmg" ]; then
    size=$2
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
    echo "Creating disk image (Size: $size MB)"
    fi
    /usr/bin/hdiutil create "$destPath/$dmgTarget" -megabytes $size -volname "${dmgVolName}" -uid 0 -gid 80 -mode 1775 -layout "SPUD" -fs "$destVolFSType" -stretch 500g -ov -puppetstrings || errExit
    echo "${progressPrefix}_copyingSource_"
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
    echo "Attaching disk image"
    fi
    /usr/bin/hdiutil attach "${destPath}/${dmgTarget}.dmg" -owners on -nobrowse -noautoopen -mountpoint "${mountPoint}" -quiet || errExit
    # Copy source Volume base system to
    /usr/bin/ditto $debug_opt "${installSource}" "${mountPoint}" || errExit
    else
    echo "This does not appear to be a Mac OS X Install DVD."
    errExit
    fi
    # If adding any additional packages or scripts
    if [ -e "${1}/OSInstall.collection" ]; then
    /usr/bin/ditto $debug_opt "${1}/OSInstall.collection" "${mountPoint}/Packages/OSInstall.collection" || errExit
    /usr/sbin/chown root:wheel "${mountPoint}/Packages/OSInstall.collection"
    # If adding any additional packages
    if [ -e "${1}/additionalPackages.txt" ]; then
    CopyPackagesWithDestinationsFromFile "${1}/additionalPackages.txt" || errExit
    fi
    # If adding any scripts
    if [ -e "${1}/additionalScripts.txt" ]; then
    InstallScriptsFromFile "${1}" "${1}/additionalScripts.txt" "${mountPoint}/Packages" || errExit
    fi
    fi
    # If it exists, install the partition data onto the install image
    ProcessAutoPartition "${1}" || errExit
    # If it exists, install minstallconfig.xml (AutoInstall data) onto the install image
    ProcessMinInstall "${1}" || errExit
    # update progress information
    echo "${progressPrefix}_buildingBooter_"
    # Copy kernel and boot loader
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Preparing the kernel and boot loader for the boot image"
    fi
    # make sure this doesn't exist
    if [ -e "${destPath}/i386" ]; then
    /bin/rm -rf "${destPath}/i386"
    fi
    /bin/mkdir -p $debug_opt "${destPath}/i386/x86_64" || errExit
    # copy these directly off the install media
    /usr/bin/ditto $debug_opt "${installSource}/boot.efi" "${destPath}/i386/booter" || errExit
    /usr/bin/chflags nohidden "${destPath}/i386/booter"
    # Grab the relevant portion of the com.apple.Boot.plist
    kernelFlags=`/usr/libexec/PlistBuddy -c "print :'Kernel Flags'" "${installSource}/Library/Preferences/SystemConfiguration/com.apple.Boot.plist"`
    /usr/libexec/PlistBuddy -c "add :'Kernel Flags' string ${kernelFlags}" "${destPath}/i386/com.apple.Boot.plist" > /dev/null 2>&1
    /usr/bin/ditto $debug_opt "${installSource}/System/Library/CoreServices/PlatformSupport.plist" "${destPath}/i386/PlatformSupport.plist" || errExit
    # extract the kernel & kernelcache for the boot shell
    /usr/bin/lipo -extract i386 "${mountPoint}/kernelcache" -output "${destPath}/i386/kernelcache" || errExit
    /usr/bin/lipo -extract x86_64 "${mountPoint}/kernelcache" -output "${destPath}/i386/x86_64/kernelcache" || errExit
    # Apply choice changes, if any
    if [ -e "${1}/MacOSXInstaller.choiceChanges" ]; then
    echo "Copy over package choice selection."
    /usr/bin/ditto $debug_opt "${1}/MacOSXInstaller.choiceChanges" "${mountPoint}/Packages/Extras/MacOSXInstaller.choiceChanges"
    fi
    # update progress information
    echo "${progressPrefix}_finishingUp_"
    # perform the final cleanup
    PostFlightDestination "${1}" "$destPath" || errExit
    rrExit
    # Apply choice changes, if any
    if [ -e "${1}/MacOSXInstaller.choiceChanges" ]; then
    echo "Copy over package choice selection."
    /usr/bin/ditto $debug_opt "${1}/MacOSXInstaller.choiceChanges" "${mountPoint}/Packages/Extras/MacOSXInstaller.choiceChanges"
    fi
    # update progress information
    echo "${progressPrefix}_finishingUp_"
    # perform the final cleanup
    PostFlightDestination "${1}" "$destPath" || errExit
    tDestination "${1}" "$destPath" || errExit
    errExit
    Vol/private/tmp" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out /private/tmp on $1"
    fi
    /bin/rm -r $opt "$srcVol/private/tmp/*"
    fi
    if [ -d "$srcVol/private/var/tmp" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out /private/var/tmp on $1"
    fi
    /bin/rm -r $opt "$srcVol/private/var/tmp/*"
    fi
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out devices and volumes on $1"
    fi
    if [ -d "$srcVol/Volumes" ]; then
    /bin/rm -r $opt "$srcVol/Volumes/*"
    fi
    if [ -d "$srcVol/dev" ]; then
    /bin/rm $opt "$srcVol/dev/*"
    fi
    if [ -d "$srcVol/private/var/run" ]; then
    /bin/rm -r $opt "$srcVol/private/var/run/*"
    fi
    # Copy kernel and build the kext cache on the boot image
    PrepareKernelAndKextCache()
    local srcDir="$1"
    local destDir="$2"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    Stopping image creation.
    Terminating script!
    Image creation failed.

  • System Image Utility "volume on diskxsx failed to mount"

    I've been trying to create a NetRestore image using System Image Utility (SIU) for the past couple of days, but no matter what I do it fails.  I was oringally using OSX 10.8.4, but have now upgraded to 10.8.5.
    After reading through the logs, I can see SIU fails whilst it's trying to mount the volume.  Has anyone else had this issue, and if so, were you able to fix it?
    I also noticed the "Create image of /Volume/Macintosh HD/" function stops at 48% instead of 100%.  Is that normal?
    Below is a copy of the log that SIU produced.
    Starting image creation.
    Workflow Started (2013-09-24 08:41:36 +0100)
    OS X Server 10.8.5 (12F37), System Image Utility 10.8.3 (624)
    Starting action: Define Image Source (1.4)
    Finished running action: Define Image Source
    Starting action: Create Image (1.7.2)
    Starting image creation process...
    Create NetRestore Image
    Initiating NetRestore from installed volume.
    progressPrefix="_progress"
    ++ progressPrefix=_progress
    scriptsDebugKey="DEBUG"
    ++ scriptsDebugKey=DEBUG
    imageIsUDIFKey="1"
    ++ imageIsUDIFKey=1
    imageFormatKey="UDZO"
    ++ imageFormatKey=UDZO
    mountPoint=""
    ++ mountPoint=
    ownershipInfoKey="501:20"
    ++ ownershipInfoKey=501:20
    blockCopyDeviceKey="0"
    ++ blockCopyDeviceKey=0
    dmgTarget="NetInstall"
    ++ dmgTarget=NetInstall
    potentialRecoveryDevice="disk4s3"
    ++ potentialRecoveryDevice=disk4s3
    asrSource="ASRInstall.pkg"
    ++ asrSource=ASRInstall.pkg
    destPath="/Users/morgan/Desktop/NetRestore of Macintosh HD_2.nbi"
    ++ destPath='/Users/morgan/Desktop/NetRestore of Macintosh HD_2.nbi'
    skipReorderingKey="0"
    ++ skipReorderingKey=0
    sourceVol="/Volumes/Macintosh HD"
    ++ sourceVol='/Volumes/Macintosh HD'
    postInstallHelperKey="1"
    ++ postInstallHelperKey=1
    . "${1}/createCommon.sh"
    + . /tmp/niutemp.rDvE48RI/createCommon.sh
    # createCommon.sh
    # Common functionality for the Image creation process.
    # sourced in by the various SIU scripts
    # Copyright © 2007-2012 Apple Inc. All rights reserved.
    # Using dscl, create a user account
    AddLocalUser()
    # $1 volume whose local node database to modify
    # $2 long name
    # $3 short name
    # $4 isAdminUser key
    # $5 password data
    # $6 password hint
    # $7 user picture path
    # $8 Language string
    local databasePath="/Local/Default/Users/${3}"
    local targetVol="${1}"
    # Find a free UID between 501 and 599
    for ((i=501; i<600; i++)); do
    output=`/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -search /Local/Default/Users UniqueID $i`
    # If there is already an account dscl returns it, so we're looking for an empty return value.
    if [ "$output" == "" ]; then
    break
    fi
    done
    # Create the user record
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -create $databasePath
    if [ $? != 0 ]; then
    echo "Failed to create '${databasePath}'."
    return 1
    fi
    # Add long name
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath RealName "${2}"
    if [ $? != 0 ]; then
    echo "Failed to set the RealName."
    return 1
    fi
    # Set up the users group information
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath PrimaryGroupID 20
    if [ $? != 0 ]; then
    echo "Failed to set the PrimaryGroupID."
    return 1
    fi
    # Add some additional stuff if the user is an admin
    if [ "${4}" == 1 ]; then
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append "/Local/Default/Groups/admin" GroupMembership "${3}"
    if [ $? != 0 ]; then
    echo "Failed to add the user to the admin group."
    return 1
    fi
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append "/Local/Default/Groups/_appserveradm" GroupMembership "${3}"
    if [ $? != 0 ]; then
    echo "Failed to add the user to the _appserveradm group."
    return 1
    fi
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append "/Local/Default/Groups/_appserverusr" GroupMembership "${3}"
    if [ $? != 0 ]; then
    echo "Failed to add the user to the _appserverusr group."
    return 1
    fi
    fi
    # Add UniqueID
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath UniqueID ${i}
    if [ $? != 0 ]; then
    echo "Failed to set the UniqueID."
    return 1
    fi
    # Add Home Directory entry
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath NFSHomeDirectory /Users/${3}
    if [ $? != 0 ]; then
    echo "Failed to set the NFSHomeDirectory."
    fi
    if [ "${6}" != "" ]; then
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath AuthenticationHint "${6}"
    if [ $? != 0 ]; then
    echo "Failed to set the AuthenticationHint."
    return 1
    fi
    fi
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath picture "${7}"
    if [ $? != 0 ]; then
    echo "Failed to set the picture."
    return 1
    fi
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -passwd $databasePath "${5}"
    if [ $? != 0 ]; then
    echo "Failed to set the passwd."
    return 1
    fi
    # Add shell
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath UserShell "/bin/bash"
    if [ $? != 0 ]; then
    echo "Failed to set the UserShell."
    return 1
    fi
    # Create Home directory
    if [ -e "/System/Library/User Template/${8}.lproj/" ]; then
    /usr/bin/ditto "/System/Library/User Template/${8}.lproj/" "${targetVol}/Users/${3}"
    else
    /usr/bin/ditto "/System/Library/User Template/English.lproj/" "${targetVol}/Users/${3}"
    fi
    if [ $? != 0 ]; then
    echo "Failed to copy the User Template."
    return 1
    fi
    /usr/sbin/chown -R $i:$i "${targetVol}/Users/${3}"
    if [ $? != 0 ]; then
    echo "Failed to set ownership on the User folder."
    return 1
    fi
    # Copies a list of files (full paths contained in the file at $1) from source to the path specified in $2
    CopyEntriesFromFileToPath()
    local theFile="$1"
    local theDest="$2"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    while read FILE
    do
    if [ -e "${FILE}" ]; then
    local leafName=`basename "${FILE}"`
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Copying ${FILE}."
    fi
    /usr/bin/ditto $opt "${FILE}" "${theDest}/${leafName}" || return 1
    fi
    done < "${theFile}"
    return 0
    # Copies a list of packages (full path, destination pairs contained in the file at $1) from source to .../System/Installation/Packages/
    CopyPackagesWithDestinationsFromFile()
    local theFile="$1"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    while read FILE
    do
    if [ -e "${FILE}" ]; then
    local leafName=`basename "${FILE}"`
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Copying ${FILE}."
    fi
    read SUB_PATH
    /usr/bin/ditto $opt "${FILE}" "${mountPoint}/Packages/${SUB_PATH}${leafName}" || return 1
    fi
    done < "${theFile}"
    return 0
    # Create an installer package in ${1} wrapping the supplied script ${2}
    CreateInstallPackageForScript()
    local tempDir="$1"
    local scriptPath="$2"
    local scriptName=`basename "${scriptPath}"`
    local entryDir=`pwd`
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Create installer for script ${scriptName}"
    opt="-v"
    fi
    # shouldn't exist on entry...
    if [ -e "${tempDir}/emptyDir" ]; then
    /bin/rm -rf "${tempDir}/emptyDir"
    fi
    # make some directories to work in
    /bin/mkdir $opt -p "${tempDir}/${scriptName}.pkg/Contents/Resources" || return 1
    /bin/mkdir $opt "${tempDir}/emptyDir" || return 1
    # Create Archive.pax.gz
    cd "${tempDir}/emptyDir"
    /bin/pax -w -x cpio -f "${tempDir}/${scriptName}.pkg/Contents/Archive.pax" .
    /usr/bin/gzip "${tempDir}/${scriptName}.pkg/Contents/Archive.pax"
    cd "${entryDir}"
    # Create the Archive.bom file
    /usr/bin/mkbom "${tempDir}/emptyDir/" "${tempDir}/${scriptName}.pkg/Contents/Archive.bom" || return 1
    # Create the Info.plist
    /bin/cat > "${tempDir}/${scriptName}.pkg/Contents/Info.plist" << END
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>CFBundleIdentifier</key>
    <string>com.apple.SystemImageUtility.${scriptName}</string>
    <key>CFBundleShortVersionString</key>
    <string>1</string>
    <key>IFMajorVersion</key>
    <integer>1</integer>
    <key>IFMinorVersion</key>
    <integer>0</integer>
    <key>IFPkgFlagDefaultLocation</key>
    <string>/tmp</string>
    <key>IFPkgFlagInstallFat</key>
    <false/>
    <key>IFPkgFlagIsRequired</key>
    <false/>
    <key>IFPkgFormatVersion</key>
    <real>0.10000000149011612</real>
    </dict>
    </plist>
    END
    echo "pkmkrpkg1" > "${tempDir}/${scriptName}.pkg/Contents/PkgInfo"
    echo "major: 1\nminor: 0" > "${tempDir}/${scriptName}.pkg/Contents/Resources/package_version"
    # Copy the script
    /bin/cp "$scriptPath" "${tempDir}/${scriptName}.pkg/Contents/Resources/postflight"
    # clean up
    /bin/rm -r "${tempDir}/emptyDir"
    return 0
    # Validate or create the requested directory
    CreateOrValidatePath()
    local targetDir="$1"
    if [ ! -d "${targetDir}" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Creating working path at ${targetDir}"
    fi
    /bin/mkdir -p "${targetDir}" || return 1
    fi
    # If any exist, apply any user accounts
    CreateUserAccounts()
    # $1 volume whose local node database to modify
    local count="${#userFullName[*]}"
    local targetVol="${1}"
    if [ $count -gt 0 ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Adding $count user account(s) to the image"
    fi
    for ((index=0; index<$count; index++)); do
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Adding user ${userFullName[$index]}"
    fi
    #lay down user here
    AddLocalUser "${targetVol}" "${userFullName[$index]}" "${userUnixName[$index]}" "${userIsAdmin[$index]}" "${userPassword[$index]}" "${userPassHint[$index]}" "${userImagePath[$index]}" "${userLanguage[$index]}"
    if [ $? != 0 ]; then
    echo "Failed to create the User '${userUnixName[$index]}'."
    return 1
    fi
    #suppress the Apple ID request
    DisableAppleIDRequestForUser "${targetVol}" "${userUnixName[$index]}"
    done
    # "touch"
    /usr/bin/touch "${targetVol}/private/var/db/.AppleSetupDone"
    /usr/bin/touch "${targetVol}/Library/Receipts/.SetupRegComplete"
    fi
    # retry the hdiutil detach until we either time out or it succeeds
    retry_hdiutil_detach()
    local mount_point="${1}"
    local tries=0
    local forceAt=0
    local limit=24
    local opt=""
    forceAt=$(($limit - 1))
    while [ $tries -lt $limit ]; do
    tries=$(( tries + 1 ))
    /bin/sleep 5
    echo "Attempting to detach the disk image again..."
    /usr/bin/hdiutil detach "${mount_point}" $opt
    if [ $? -ne 0 ]; then
    # Dump a list of any still open files on the mountPoint
    if [ "${scriptsDebugKey}" == "DEBUG" ]; then
    /usr/sbin/lsof +fg "${mount_point}"
    fi
    if [ $tries -eq $forceAt ]; then
    echo "Failed to detach disk image at '${mount_point}' normally, adding -force."
    opt="-force"
    fi
    if [ $tries -eq $limit ]; then
    echo "Failed to detach disk image at '${mount_point}'."
    exit 1
    fi
    else
    tries=$limit
    fi
    done
    # Create the dyld shared cache files
    DetachAndRemoveMount()
    local theMount="${1}"
    local mountLoc=`mount | grep "${theMount}"`
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Detaching disk image"
    # Dump a list of any still open files on the mountPoint
    if [ "${scriptsDebugKey}" == "DEBUG" ]; then
    /usr/sbin/lsof +fg "${theMount}"
    fi
    fi
    # Finally detach the mount (if it's actually mounted) and dispose the mountPoint directory
    if [ "${mountLoc}" != "" ]; then
    /usr/bin/hdiutil detach "${theMount}" || retry_hdiutil_detach "${theMount}" || return 1
    fi
    /bin/rmdir "${theMount}" || return 1
    return 0
    # Turn off the Apple ID request that happens on first boot after installing the OS
    DisableAppleIDRequestForUser()
    local targetUserLib="${1}/Users/${2}/Library"
    # Only do this if the file doesn't exist
    if [ ! -e "${targetUserLib}/Preferences/com.apple.SetupAssistant.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Disabling Apple ID request for user '${2}'"
    fi
    /usr/libexec/PlistBuddy -c "Add :DidSeeCloudSetup bool 1" "${targetUserLib}/Preferences/com.apple.SetupAssistant.plist" > /dev/null 2>&1
    /usr/libexec/PlistBuddy -c "Add :LastSeenCloudProductVersion string 10.8" "${targetUserLib}/Preferences/com.apple.SetupAssistant.plist" > /dev/null 2>&1
    fi
    return 0
    # If the pieces exist, enable remote access for the shell image
    EnableRemoteAccess()
    local srcVol="${1}"
    local opt=""
    if [ -e "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Enabling shell image remote access support"
    opt="-v"
    fi
    # install some things (again which aren't part of BaseSystem) needed for remote ASR installs
    /usr/bin/ditto $opt "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" "${mountPoint}/usr/lib/pam/pam_serialnumber.so.2" || return 1
    if [ -e "${srcVol}/usr/sbin/installer" ]; then
    /usr/bin/ditto $opt "${srcVol}/usr/sbin/installer" "${mountPoint}/usr/sbin/installer" || return 1
    fi
    # copy the sshd config and add our keys to the end of it
    if [ -e "${srcVol}/etc/sshd_config" ]; then
    /bin/cat "${srcVol}/etc/sshd_config" - > "${mountPoint}/etc/sshd_config" << END
    HostKey /private/var/tmp/ssh_host_key
    HostKey /private/var/tmp/ssh_host_rsa_key
    HostKey /private/var/tmp/ssh_host_dsa_key
    END
    fi
    fi
    return 0
    # If it exists, install the sharing names and/or directory binding support to the install image
    HandleNetBootClientHelper()
    local tempDir="${1}"
    local targetVol="${2}"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    if [ -e  "${tempDir}/bindingNames.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Directory Service binding information"
    fi
    /usr/bin/ditto $opt "${tempDir}/bindingNames.plist" "${targetVol}/etc/bindingNames.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/etc/bindingNames.plist"
    /bin/chmod 644 "${targetVol}/etc/bindingNames.plist"
    fi
    if [ -e  "${tempDir}/sharingNames.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Sharing Names support"
    fi
    /usr/bin/ditto $opt "${tempDir}/sharingNames.plist" "${targetVol}/etc/sharingNames.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/etc/sharingNames.plist"
    /bin/chmod 644 "${targetVol}/etc/sharingNames.plist"
    fi
    if [ -e  "${tempDir}/NetBootClientHelper" ]; then
    /usr/bin/ditto $opt "${tempDir}/NetBootClientHelper" "${targetVol}/usr/sbin/NetBootClientHelper" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/usr/sbin/NetBootClientHelper"
    /bin/chmod 555 "${targetVol}/usr/sbin/NetBootClientHelper"
    /usr/bin/ditto $opt "${tempDir}/com.apple.NetBootClientHelper.plist" "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
    /bin/chmod 644 "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
    # finally, make sure it isn't disabled...
    /usr/libexec/PlistBuddy -c "Delete :com.apple.NetBootClientHelper" "${targetVol}/var/db/launchd.db/com.apple.launchd/overrides.plist" > /dev/null 2>&1
    fi
    return 0
    # If any exist, install configuration profiles to the install image
    InstallConfigurationProfiles()
    local tempDir="${1}"
    local targetVol="${2}"
    local profilesDir="${targetVol}/var/db/ConfigurationProfiles"
    if [ -e  "${tempDir}/configProfiles.txt" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Configuration Profiles"
    fi
    /bin/mkdir -p "${profilesDir}/Setup" || return 1
    # Make sure the perms are correct
    /usr/sbin/chown root:wheel "${profilesDir}"
    /bin/chmod 755 "${profilesDir}"
    /usr/sbin/chown root:wheel "${profilesDir}/Setup"
    /bin/chmod 755 "${profilesDir}/Setup"
    /usr/bin/touch "${profilesDir}/.profilesAreInstalled"
    CopyEntriesFromFileToPath "${tempDir}/configProfiles.txt" "${profilesDir}/Setup" || return 1
    # Enable MCX debugging
    if [ 1 == 1 ]; then
    if [ -e  "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" ]; then
    /usr/libexec/PlistBuddy -c "Delete :debugOutput" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
    /usr/libexec/PlistBuddy -c "Delete :collateLogs" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
    fi
    /usr/libexec/PlistBuddy -c "Add :debugOutput string -2" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
    /usr/libexec/PlistBuddy -c "Add :collateLogs string 1" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
    fi
    fi
    # Converts a list of scripts (full paths contained in the file at $1) into packages in $3
    InstallScriptsFromFile()
    local tempDir="${1}"
    local theFile="${2}"
    local targetDir="${3}"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Converting scripts into install packages"
    opt="-v"
    fi
    while read FILE
    do
    if [ -e "${FILE}" ]; then
    # make an installer package out of the script
    CreateInstallPackageForScript "$tempDir" "${FILE}" || return 1
    # copy the resulting package to the Packages directory
    local leafName=`basename "${FILE}"`
    /usr/bin/ditto $opt "${tempDir}/${leafName}.pkg" "${targetDir}/${leafName}.pkg" || return 1
    # clean up
    /bin/rm -r "${tempDir}/${leafName}.pkg"
    fi
    done < "${theFile}"
    return 0
    # Prepare the source by deleting stuff we don't want to copy if sourcing a volume
    PostFlightDestination()
    local tempDir="${1}"
    local destDir="${2}"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Performing post install cleanup"
    opt="-v"
    fi
    # delete the DS indices to force reindexing...
    if [ -e "${mountPoint}/var/db/dslocal/indices/Default/index" ]; then
    /bin/rm $opt "${mountPoint}/var/db/dslocal/indices/Default/index"
    fi
    # detach the disk and remove the mount folder
    DetachAndRemoveMount "${mountPoint}"
    if [ $? != 0 ]; then
    echo "Failed to detach and clean up the mount at '${mountPoint}'."
    return 1
    fi
    echo "Correcting permissions. ${ownershipInfoKey} $destDir"
    /usr/sbin/chown -R "${ownershipInfoKey}" "$destDir"
    # Prepare the source by deleting stuff we don't want to copy if sourcing a volume
    PreCleanSource()
    local srcVol="$1"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    if [ -e "$srcVol/private/var/vm/swapfile*" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Removing swapfiles on $1"
    fi
    /bin/rm $opt "$srcVol/private/var/vm/swapfile*"
    fi
    if [ -e "$srcVol/private/var/vm/sleepimage" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Removing sleepimage on $1"
    fi
    /bin/rm $opt "$srcVol/private/var/vm/sleepimage"
    fi
    if [ -d "$srcVol/private/tmp" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out /private/tmp on $1"
    fi
    /bin/rm -r $opt "$srcVol/private/tmp/*" > /dev/null 2>&1
    fi
    if [ -d "$srcVol/private/var/tmp" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out /private/var/tmp on $1"
    fi
    /bin/rm -r $opt "$srcVol/private/var/tmp/*" > /dev/null 2>&1
    fi
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out devices and volumes on $1"
    fi
    if [ -d "$srcVol/Volumes" ]; then
    /bin/rm -r $opt "$srcVol/Volumes/*" > /dev/null 2>&1
    fi
    if [ -d "$srcVol/dev" ]; then
    /bin/rm $opt "$srcVol/dev/*" > /dev/null 2>&1
    fi
    if [ -d "$srcVol/private/var/run" ]; then
    /bin/rm -r $opt "$srcVol/private/var/run/*" > /dev/null 2>&1
    fi
    # Copy kernel and build the kext cache on the boot image
    PrepareKernelAndKextCache()
    local srcDir="$1"
    local destDir="$2"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Preparing the kernel and kext cache for the boot image"
    opt="-v"
    fi
    # Insure the kext cache on our source volume (the boot shell) is up to date
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Updating kext cache on source volume"
    fi
    /usr/sbin/kextcache -update-volume "${srcDir}" || return 1
    # Copy the i386 and, if it exists, the x86_64 architecture
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing the kext cache to the boot image"
    fi
    # make sure this doesn't exist
    if [ -e "${destDir}/i386" ]; then
    /bin/rm -rf "${destDir}/i386"
    fi
    # Install kextcaches to the nbi folder
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Creating a kernelcache for the boot shell"
    fi
    /bin/mkdir -p $opt "${destDir}/i386/x86_64" || return 1
    /usr/sbin/kextcache -arch x86_64 -L -N -S -z -K "${srcDir}/mach_kernel" -c "${destDir}/i386/x86_64/kernelcache" "${srcDir}/System/Library/Extensions" || return 1
    # Create the i386 and x86_64 boot loaders on the boot image
    PrepareBootLoader()
    local srcVol="$1"
    local destDir="$2"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Preparing boot loader"
    opt="-v"
    fi
    # Copy the boot.efi to the booter shell
    if [ -e "${mountPoint}/System/Library/CoreServices/boot.efi" ]; then
    /usr/bin/ditto $opt "${mountPoint}/System/Library/CoreServices/boot.efi" "${destDir}/i386/booter" || return 1
    else
    /usr/bin/ditto $opt "${srcVol}/System/Library/CoreServices/boot.efi" "${destDir}/i386/booter" || return 1
    fi
    # Unlock the file so we can change its owner later
    chflags nouchg "${destDir}/i386/booter"
    # Copy the PlatformSupport.plist file
    if [ -e "${mountPoint}/System/Library/CoreServices/PlatformSupport.plist" ]; then
    /usr/bin/ditto $opt "${mountPoint}/System/Library/CoreServices/PlatformSupport.plist" "${destDir}/i386/PlatformSupport.plist" || return 1
    else
    /usr/bin/ditto $opt "${srcVol}/System/Library/CoreServices/PlatformSupport.plist" "${destDir}/i386/PlatformSupport.plist" || return 1
    fi
    # If it exists, install the partitioning application and data onto the install image
    ProcessAutoPartition()
    local tempDir="$1"
    local opt=""
    local targetDir=""
    if [ -e "$tempDir/PartitionInfo.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    # Determine if this is an install source, or a restore source
    if [ -d "${mountPoint}/Packages" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Partitioning application and data to install image"
    fi
    targetDir="${mountPoint}/Packages"
    elif [ -d "${mountPoint}/System/Installation/Packages" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Partitioning application and data to restore image"
    fi
    targetDir="${mountPoint}/System/Installation/Packages"
    else
    echo "There doesn't appear to be either an install or restore source mounted at ${mountPoint}"
    return 1
    fi
    # Create the Extras directory if it doesn't exist
    if [ ! -d "${targetDir}/Extras" ]; then
    /bin/mkdir "${targetDir}/Extras"
    fi
    targetDir="${targetDir}/Extras"
    /usr/bin/ditto $opt "$tempDir/PartitionInfo.plist" "${targetDir}/PartitionInfo.plist" || return 1
    /usr/bin/ditto $opt "$tempDir/AutoPartition.app" "${targetDir}/AutoPartition.app" || return 1
    fi
    return 0
    # If it exists, install the minstallconfig.xml onto the install image
    ProcessMinInstall()
    local tempDir="$1"
    local opt=""
    local targetDir="${mountPoint}/Packages/Extras"
    if [ -e "$tempDir/minstallconfig.xml" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing minstallconfig.xml to install image"
    opt="-v"
    fi
    /usr/bin/ditto $opt "$tempDir/minstallconfig.xml" "${targetDir}/minstallconfig.xml" || return 1
    /usr/sbin/chown root:wheel "${targetDir}/minstallconfig.xml"
    /bin/chmod 644 "${targetDir}/minstallconfig.xml"
    fi
    return 0
    # untar the OSInstall.mpkg so it can be modified
    untarOSInstallMpkg()
    local tempDir="$1"
    local opt=""
    # we might have already done this, so check for it first
    if [ ! -d "${tempDir}/OSInstall_pkg" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "uncompressing OSInstall.mpkg"
    opt="-v"
    fi
    /bin/mkdir "${tempDir}/OSInstall_pkg"
    cd "${tempDir}/OSInstall_pkg"
    /usr/bin/xar $opt -xf "${mountPoint}/System/Installation/Packages/OSInstall.mpkg"
    # make Distribution writeable
    /bin/chmod 777 "${tempDir}/OSInstall_pkg"
    /bin/chmod 666 "${tempDir}/OSInstall_pkg/Distribution"
    fi
    # Make a tempdir to mount the image on
    mountPoint=`mktemp -d "/tmp/mnt.XXXXXXXX"`
    mktemp -d "/tmp/mnt.XXXXXXXX"
    ++ mktemp -d /tmp/mnt.XXXXXXXX
    + mountPoint=/tmp/mnt.7E4iD6mQ
    sourceMount=""
    + sourceMount=
    crfsErrExit()
    echo "Execution of '`basename \"${0}\"`' failed. Cleaning up."
    # detach the disk and remove the mount folder
    DetachAndRemoveMount "${mountPoint}"
    # detach the mounted source, if necessary
    if [ "${sourceMount}" != "" ] ; then
    DetachAndRemoveMount "${sourceMount}"
    fi
    # Remove the items we created
    /bin/rm -r "$destPath/i386" > /dev/null 2>&1
    /bin/rm "$destPath/$dmgTarget.dmg" > /dev/null 2>&1
    /bin/rm "$destPath/System.dmg" > /dev/null 2>&1
    # Finally, remove the directory IF empty
    /bin/rmdir "$destPath"
    exit 1
    InstallNetBootClientHelper()
    local tempDir="${1}"
    local destDir="${mountPoint}/Packages/Extras"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    if [ -e "${tempDir}/bindingNames.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Directory Service binding information"
    fi
    /usr/bin/ditto $opt "${tempDir}/bindingNames.plist" "${destDir}/bindingNames.plist" || return 1
    /usr/sbin/chown root:wheel "${destDir}/bindingNames.plist"
    /bin/chmod 644 "${destDir}/bindingNames.plist"
    fi
    if [ -e "${tempDir}/sharingNames.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Sharing Names support"
    fi
    /usr/bin/ditto $opt "${tempDir}/sharingNames.plist" "${destDir}/sharingNames.plist" || return 1
    /usr/sbin/chown root:wheel "${destDir}/sharingNames.plist"
    /bin/chmod 644 "${destDir}/sharingNames.plist"
    fi
    # This is required, make sure it's here
    /usr/bin/ditto $opt "${tempDir}/NetBootClientHelper" "${destDir}/NetBootClientHelper" || return 1
    /usr/sbin/chown root:wheel "${destDir}/NetBootClientHelper"
    /bin/chmod 555 "${destDir}/NetBootClientHelper"
    /usr/bin/ditto $opt "${tempDir}/com.apple.NetBootClientHelper.plist" "${destDir}/com.apple.NetBootClientHelper.plist" || return 1
    /usr/sbin/chown root:wheel "${destDir}/com.apple.NetBootClientHelper.plist"
    /bin/chmod 644 "${destDir}/com.apple.NetBootClientHelper.plist"
    /usr/bin/ditto $opt "${tempDir}/installClientHelper.sh" "${mountPoint}/var/tmp/niu/postinstall/installClientHelper.sh" || return 1
    /usr/sbin/chown root:wheel "${mountPoint}/var/tmp/niu/postinstall/installClientHelper.sh"
    /bin/chmod 555 "${mountPoint}/var/tmp/niu/postinstall/installClientHelper.sh"
    return 0
    InstallBaseSystemToShell()
    local baseSystemDMG="${1}"
    local shellMount="${2}"
    local tempDir=`/usr/bin/dirname "${1}"`
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
    opt="-v"
    echo "Copying Base System bits to the boot shell image"
    fi
    baseMount=`mktemp -d "/tmp/mnt_bs.XXXXXXXX"`
    /usr/bin/hdiutil attach "${baseSystemDMG}" -noverify -owners on -nobrowse -noautoopen -mountpoint "${baseMount}" -quiet || return 1
    # Copy the boot.efi and SystemVersion.plist out to the shell dmg
    /usr/bin/ditto $opt "${baseMount}/System/Library/CoreServices/boot.efi" "${shellMount}/boot.efi" || return 1
    chflags nouchg "${shellMount}/boot.efi"
    /bin/mkdir -p "${shellMount}/usr/standalone/i386" || return 1
    /bin/ln "${shellMount}/boot.efi" "${shellMount}/usr/standalone/i386/boot.efi" || return 1
    /bin/mkdir -p "${shellMount}/System/Library/CoreServices" || return 1
    /bin/ln "${shellMount}/boot.efi" "${shellMount}/System/Library/CoreServices/boot.efi" || return 1
    /usr/bin/ditto $opt "${baseMount}/System/Library/CoreServices/SystemVersion.plist" "${shellMount}/System/Library/CoreServices/SystemVersion.plist" || return 1
    # stash some things we need for later
    /usr/bin/ditto $opt "${baseMount}/System/Library/Caches/com.apple.kext.caches/Startup/kernelcache" "${tempDir}/kernelcache" || return 1
    /usr/bin/ditto $opt "${baseMount}/System/Library/CoreServices/com.apple.recovery.boot/PlatformSuppo rt.plist" "${tempDir}/PlatformSupport.plist" || return 1
    # Clean up
    /usr/bin/hdiutil detach "${baseMount}" || retry_hdiutil_detach "${baseMount}" || return 1
    /bin/rmdir "${baseMount}"
    theDmg=`basename "${baseSystemDMG}"`
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
    echo "Copying ${theDmg} to the boot shell."
    fi
    /usr/bin/ditto $debug_opt "${baseSystemDMG}" "${shellMount}/${theDmg}"
    return 0
    # Set up for script debugging
    debug_opt=""
    + debug_opt=
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
    debug_opt="-v"
    fi
    + '[' DEBUG == VERBOSE -o DEBUG == DEBUG ']'
    + debug_opt=-v
    # Prepare the destination
    CreateOrValidatePath "${destPath}" || crfsErrExit
    + CreateOrValidatePath '/Users/morgan/Desktop/NetRestore of Macintosh HD_2.nbi'
    + local 'targetDir=/Users/morgan/Desktop/NetRestore of Macintosh HD_2.nbi'
    + '[' '!' -d '/Users/morgan/Desktop/NetRestore of Macintosh HD_2.nbi' ']'
    + '[' DEBUG == VERBOSE -o DEBUG == DEBUG ']'
    + echo 'Creating working path at /Users/morgan/Desktop/NetRestore of Macintosh HD_2.nbi'
    Creating working path at /Users/morgan/Desktop/NetRestore of Macintosh HD_2.nbi
    + /bin/mkdir -p '/Users/morgan/Desktop/NetRestore of Macintosh HD_2.nbi'
    # Source in our image building commands
    . "${1}/buildCommands.sh"
    + . /tmp/niutemp.rDvE48RI/buildCommands.sh
    '/System/Library/CoreServices/System Image Utility.app/Contents/Library/Automator/Create Image.action/Contents/Resources/asrFromVolume.sh' "/tmp/niutemp.rDvE48RI" "/Volumes/Macintosh HD" "System" || exit 1
    ++ '/System/Library/CoreServices/System Image Utility.app/Contents/Library/Automator/Create Image.action/Contents/Resources/asrFromVolume.sh' /tmp/niutemp.rDvE48RI '/Volumes/Macintosh HD' System
    progressPrefix="_progress"
    ++ progressPrefix=_progress
    scriptsDebugKey="DEBUG"
    ++ scriptsDebugKey=DEBUG
    imageIsUDIFKey="1"
    ++ imageIsUDIFKey=1
    imageFormatKey="UDZO"
    ++ imageFormatKey=UDZO
    mountPoint=""
    ++ mountPoint=
    ownershipInfoKey="501:20"
    ++ ownershipInfoKey=501:20
    blockCopyDeviceKey="0"
    ++ blockCopyDeviceKey=0
    dmgTarget="NetInstall"
    ++ dmgTarget=NetInstall
    potentialRecoveryDevice="disk4s3"
    ++ potentialRecoveryDevice=disk4s3
    asrSource="ASRInstall.pkg"
    ++ asrSource=ASRInstall.pkg
    destPath="/Users/morgan/Desktop/NetRestore of Macintosh HD_2.nbi"
    ++ destPath='/Users/morgan/Desktop/NetRestore of Macintosh HD_2.nbi'
    skipReorderingKey="0"
    ++ skipReorderingKey=0
    sourceVol="/Volumes/Macintosh HD"
    ++ sourceVol='/Volumes/Macintosh HD'
    postInstallHelperKey="1"
    ++ postInstallHelperKey=1
    # variables we will need
    created_dest="NO"
    + created_dest=NO
    afvErrExit()
    echo "Execution of '`basename \"${0}\"`' failed. Cleaning up."
    # detach the disk and remove the mount folder
    if [ "${created_dest}" == "YES" ]; then
    /bin/rm -r "${destPath}"
    fi
    exit 1
    retrieveBaseSystemDMG()
    local tempDir="${1}"
    local opt=""
    if [ "${potentialRecoveryDevice}" != "" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
    echo "Retrieving BaseSystem bits from Recovery HD"
    opt="-v"
    fi
    recoveryMount=`mktemp -d "/tmp/mnt_rp.XXXXXXXX"`
    /usr/sbin/diskutil mount readOnly -mountPoint "${recoveryMount}" "${potentialRecoveryDevice}" || return 1
    # Now make sure this is what was expected
    if [ -e "${recoveryMount}/com.apple.recovery.boot/BaseSystem.dmg" ]; then
    /usr/bin/ditto $opt "${recoveryMount}/com.apple.recovery.boot/BaseSystem.dmg" "${tempDir}/BaseSystem.dmg" || return 1
    /usr/bin/ditto $opt "${recoveryMount}/com.apple.recovery.boot/BaseSystem.chunklist" "${tempDir}/BaseSystem.chunklist"
    fi
    /usr/sbin/diskutil unmount "${potentialRecoveryDevice}" || return 1
    /bin/rmdir "${recoveryMount}"
    fi
    return 0
    # Insure the working path (dmg destination) exists
    if [ ! -d "${destPath}" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Creating working path at ${destPath}"
    fi
    /bin/mkdir -p "${destPath}" || afvErrExit
    created_dest="YES"
    fi
    + '[' '!' -d '/Users/morgan/Desktop/NetRestore of Macintosh HD_2.nbi' ']'
    # If the volume source is the boot drive we have an asr:// type source
    if [ "${2}" == "/" ]; then
    # Create an empty image to skip the ASR volume creation
    /usr/bin/touch "${destPath}/${3}.dmg"
    # Set aside the needed BaseSystem.dmg
    retrieveBaseSystemDMG "${1}" || afvErrExit
    fi
    + '[' '/Volumes/Macintosh HD' == / ']'
    # Look for an existing System.dmg
    if [ ! -e "${destPath}/${3}.dmg" ]; then
    # Didn't find one, so create it from volume source
    ${1}/makeNetRestoreFromItem.sh "${1}" "${2}" "${3}" || afvErrExit
    fi
    + '[' '!' -e '/Users/morgan/Desktop/NetRestore of Macintosh HD_2.nbi/System.dmg' ']'
    + /tmp/niutemp.rDvE48RI/makeNetRestoreFromItem.sh /tmp/niutemp.rDvE48RI '/Volumes/Macintosh HD' System
    progressPrefix="_progress"
    ++ progressPrefix=_progress
    scriptsDebugKey="DEBUG"
    ++ scriptsDebugKey=DEBUG
    imageIsUDIFKey="1"
    ++ imageIsUDIFKey=1
    imageFormatKey="UDZO"
    ++ imageFormatKey=UDZO
    mountPoint=""
    ++ mountPoint=
    ownershipInfoKey="501:20"
    ++ ownershipInfoKey=501:20
    blockCopyDeviceKey="0"
    ++ blockCopyDeviceKey=0
    dmgTarget="NetInstall"
    ++ dmgTarget=NetInstall
    potentialRecoveryDevice="disk4s3"
    ++ potentialRecoveryDevice=disk4s3
    asrSource="ASRInstall.pkg"
    ++ asrSource=ASRInstall.pkg
    destPath="/Users/morgan/Desktop/NetRestore of Macintosh HD_2.nbi"
    ++ destPath='/Users/morgan/Desktop/NetRestore of Macintosh HD_2.nbi'
    skipReorderingKey="0"
    ++ skipReorderingKey=0
    sourceVol="/Volumes/Macintosh HD"
    ++ sourceVol='/Volumes/Macintosh HD'
    postInstallHelperKey="1"
    ++ postInstallHelperKey=1
    . "${1}/createCommon.sh"
    + . /tmp/niutemp.rDvE48RI/createCommon.sh
    # createCommon.sh
    # Common functionality for the Image creation process.
    # sourced in by the various SIU scripts
    # Copyright © 2007-2012 Apple Inc. All rights reserved.
    # Using dscl, create a user account
    AddLocalUser()
    # $1 volume whose local node database to modify
    # $2 long name
    # $3 short name
    # $4 isAdminUser key
    # $5 password data
    # $6 password hint
    # $7 user picture path
    # $8 Language string
    local databasePath="/Local/Default/Users/${3}"
    local targetVol="${1}"
    # Find a free UID between 501 and 599
    for ((i=501; i<600; i++)); do
    output=`/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -search /Local/Default/Users UniqueID $i`
    # If there is already an account dscl returns it, so we're looking for an empty return value.
    if [ "$output" == "" ]; then
    break
    fi
    done
    # Create the user record
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -create $databasePath
    if [ $? != 0 ]; then
    echo "Failed to create '${databasePath}'."
    return 1
    fi
    # Add long name
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath RealName "${2}"
    if [ $? != 0 ]; then
    echo "Failed to set the RealName."
    return 1
    fi
    # Set up the users group information
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath PrimaryGroupID 20
    if [ $? != 0 ]; then
    echo "Failed to set the PrimaryGroupID."
    return 1
    fi
    # Add some additional stuff if the user is an admin
    if [ "${4}" == 1 ]; then
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append "/Local/Default/Groups/admin" GroupMembership "${3}"
    if [ $? != 0 ]; then
    echo "Failed to add the user to the admin group."
    return 1
    fi
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append "/Local/Default/Groups/_appserveradm" GroupMembership "${3}"
    if [ $? != 0 ]; then
    echo "Failed to add the user to the _appserveradm group."
    return 1
    fi
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append "/Local/Default/Groups/_appserverusr" GroupMembership "${3}"
    if [ $? != 0 ]; then
    echo "Failed to add the user to the _appserverusr group."
    return 1
    fi
    fi
    # Add UniqueID
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath UniqueID ${i}
    if [ $? != 0 ]; then
    echo "Failed to set the UniqueID."
    return 1
    fi
    # Add Home Directory entry
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath NFSHomeDirectory /Users/${3}
    if [ $? != 0 ]; then
    echo "Failed to set the NFSHomeDirectory."
    fi
    if [ "${6}" != "" ]; then
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath AuthenticationHint "${6}"
    if [ $? != 0 ]; then
    echo "Failed to set the AuthenticationHint."
    return 1
    fi
    fi
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath picture "${7}"
    if [ $? != 0 ]; then
    echo "Failed to set the picture."
    return 1
    fi
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -passwd $databasePath "${5}"
    if [ $? != 0 ]; then
    echo "Failed to set the passwd."
    return 1
    fi
    # Add shell
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath UserShell "/bin/bash"
    if [ $? != 0 ]; then
    echo "Failed to set the UserShell."
    return 1
    fi
    # Create Home directory
    if [ -e "/System/Library/User Template/${8}.lproj/" ]; then
    /usr/bin/ditto "/System/Library/User Template/${8}.lproj/" "${targetVol}/Users/${3}"
    else
    /usr/bin/ditto "/System/Library/User Template/English.lproj/" "${targetVol}/Users/${3}"
    fi
    if [ $? != 0 ]; then
    echo "Failed to copy the User Template."
    return 1
    fi
    /usr/sbin/chown -R $i:$i "${targetVol}/Users/${3}"
    if [ $? != 0 ]; then
    echo "Failed to set ownership on the User folder."
    return 1
    fi
    # Copies a list of files (full paths contained in the file at $1) from source to the path specified in $2
    CopyEntriesFromFileToPath()
    local theFile="$1"
    local theDest="$2"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    while read FILE
    do
    if [ -e "${FILE}" ]; then
    local leafName=`basename "${FILE}"`
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Copying ${FILE}."
    fi
    /usr/bin/ditto $opt "${FILE}" "${theDest}/${leafName}" || return 1
    fi
    done < "${theFile}"
    return 0
    # Copies a list of packages (full path, destination pairs contained in the file at $1) from source to .../System/Installation/Packages/
    CopyPackagesWithDestinationsFromFile()
    local theFile="$1"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    while read FILE
    do
    if [ -e "${FILE}" ]; then
    local leafName=`basename "${FILE}"`
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Copying ${FILE}."
    fi
    read SUB_PATH
    /usr/bin/ditto $opt "${FILE}" "${mountPoint}/Packages/${SUB_PATH}${leafName}" || return 1
    fi
    done < "${theFile}"
    return 0
    # Create an installer package in ${1} wrapping the supplied script ${2}
    CreateInstallPackageForScript()
    local tempDir="$1"
    local scriptPath="$2"
    local scriptName=`basename "${scriptPath}"`
    local entryDir=`pwd`
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Create installer for script ${scriptName}"
    opt="-v"
    fi
    # shouldn't exist on entry...
    if [ -e "${tempDir}/emptyDir" ]; then
    /bin/rm -rf "${tempDir}/emptyDir"
    fi
    # make some directories to work in
    /bin/mkdir $opt -p "${tempDir}/${scriptName}.pkg/Contents/Resources" || return 1
    /bin/mkdir $opt "${tempDir}/emptyDir" || return 1
    # Create Archive.pax.gz
    cd "${tempDir}/emptyDir"
    /bin/pax -w -x cpio -f "${tempDir}/${scriptName}.pkg/Contents/Archive.pax" .
    /usr/bin/gzip "${tempDir}/${scriptName}.pkg/Contents/Archive.pax"
    cd "${entryDir}"
    # Create the Archive.bom file
    /usr/bin/mkbom "${tempDir}/emptyDir/" "${tempDir}/${scriptName}.pkg/Contents/Archive.bom" || return 1
    # Create the Info.plist
    /bin/cat > "${tempDir}/${scriptName}.pkg/Contents/Info.plist" << END
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>CFBundleIdentifier</key>
    <string>com.apple.SystemImageUtility.${scriptName}</string>
    <key>CFBundleShortVersionString</key>
    <string>1</string>
    <key>IFMajorVersion</key>
    <integer>1</integer>
    <key>IFMinorVersion</key>
    <integer>0</integer>
    <key>IFPkgFlagDefaultLocation</key>
    <string>/tmp</string>
    <key>IFPkgFlagInstallFat</key>
    <false/>
    <key>IFPkgFlagIsRequired</key>
    <false/>
    <key>IFPkgFormatVersion</key>
    <real>0.10000000149011612</real>
    </dict>
    </plist>
    END
    echo "pkmkrpkg1" > "${tempDir}/${scriptName}.pkg/Contents/PkgInfo"
    echo "major: 1\nminor: 0" > "${tempDir}/${scriptName}.pkg/Contents/Resources/package_version"
    # Copy the script
    /bin/cp "$scriptPath" "${tempDir}/${scriptName}.pkg/Contents/Resources/postflight"
    # clean up
    /bin/rm -r "${tempDir}/emptyDir"
    return 0
    # Validate or create the requested directory
    CreateOrValidatePath()
    local targetDir="$1"
    if [ ! -d "${targetDir}" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Creating working path at ${targetDir}"
    fi
    /bin/mkdir -p "${targetDir}" || return 1
    fi
    # If any exist, apply any user accounts
    CreateUserAccounts()
    # $1 volume whose local node database to modify
    local count="${#userFullName[*]}"
    local targetVol="${1}"
    if [ $count -gt 0 ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Adding $count user account(s) to the image"
    fi
    for ((index=0; index<$count; index++)); do
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Adding user ${userFullName[$index]}"
    fi
    #lay down user here
    AddLocalUser "${targetVol}" "${userFullName[$index]}" "${userUnixName[$index]}" "${userIsAdmin[$index]}" "${userPassword[$index]}" "${userPassHint[$index]}" "${userImagePath[$index]}" "${userLanguage[$index]}"
    if [ $? != 0 ]; then
    echo "Failed to create the User '${userUnixName[$index]}'."
    return 1
    fi
    #suppress the Apple ID request
    DisableAppleIDRequestForUser "${targetVol}" "${userUnixName[$index]}"
    done
    # "touch"
    /usr/bin/touch "${targetVol}/private/var/db/.AppleSetupDone"
    /usr/bin/touch "${targetVol}/Library/Receipts/.SetupRegComplete"
    fi
    # retry the hdiutil detach until we either time out or it succeeds
    retry_hdiutil_detach()
    local mount_point="${1}"
    local tries=0
    local forceAt=0
    local limit=24
    local opt=""
    forceAt=$(($limit - 1))
    while [ $tries -lt $limit ]; do
    tries=$(( tries + 1 ))
    /bin/sleep 5
    echo "Attempting to detach the disk image again..."
    /usr/bin/hdiutil detach "${mount_point}" $opt
    if [ $? -ne 0 ]; then
    # Dump a list of any still open files on the mountPoint
    if [ "${scriptsDebugKey}" == "DEBUG" ]; then
    /usr/sbin/lsof +fg "${mount_point}"
    fi
    if [ $tries -eq $forceAt ]; then
    echo "Failed to detach disk image at '${mount_point}' normally, adding -force."
    opt="-force"
    fi
    if [ $tries -eq $limit ]; then
    echo "Failed to detach disk image at '${mount_point}'."
    exit 1
    fi
    else
    tries=$limit
    fi
    done
    # Create the dyld shared cache files
    DetachAndRemoveMount()
    local theMount="${1}"
    local mountLoc=`mount | grep "${theMount}"`
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Detaching disk image"
    # Dump a list of any still open files on the mountPoint
    if [ "${scriptsDebugKey}" == "DEBUG" ]; then
    /usr/sbin/lsof +fg "${theMount}"
    fi
    fi
    # Finally detach the mount (if it's actually mounted) and dispose the mountPoint directory
    if [ "${mountLoc}" != "" ]; then
    /usr/bin/hdiutil detach "${theMount}" || retry_hdiutil_detach "${theMount}" || return 1
    fi
    /bin/rmdir "${theMount}" || return 1
    return 0
    # Turn off the Apple ID request that happens on first boot after installing the OS
    DisableAppleIDRequestForUser()
    local targetUserLib="${1}/Users/${2}/Library"
    # Only do this if the file doesn't exist
    if [ ! -e "${targetUserLib}/Preferences/com.apple.SetupAssistant.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Disabling Apple ID request for user '${2}'"
    fi
    /usr/libexec/PlistBuddy -c "Add :DidSeeCloudSetup bool 1" "${targetUserLib}/Preferences/com.apple.SetupAssistant.plist" > /dev/null 2>&1
    /usr/libexec/PlistBuddy -c "Add :LastSeenCloudProductVersion string 10.8" "${targetUserLib}/Preferences/com.apple.SetupAssistant.plist" > /dev/null 2>&1
    fi
    return 0
    # If the pieces exist, enable remote access for the shell image
    EnableRemoteAccess()
    local srcVol="${1}"
    local opt=""
    if [ -e "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Enabling shell image remote access support"
    opt="-v"
    fi
    # install some things (again which aren't part of BaseSystem) needed for remote ASR installs
    /usr/bin/ditto $opt "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" "${mountPoint}/usr/lib/pam/pam_serialnumber.so.2" || return 1
    if [ -e "${srcVol}/usr/sbin/installer" ]; then
    /usr/bin/ditto $opt "${srcVol}/usr/sbin/installer" "${mountPoint}/usr/sbin/installer" || return 1
    fi
    # copy the sshd config and add our keys to the end of it
    if [ -e "${srcVol}/etc/sshd_config" ]; then
    /bin/cat "${srcVol}/etc/sshd_config" - > "${mountPoint}/etc/sshd_config" << END
    HostKey /private/var/tmp/ssh_host_key
    HostKey /private/var/tmp/ssh_host_rsa_key
    HostKey /private/var/tmp/ssh_host_dsa_key
    END
    fi
    fi
    return 0
    # If it exists, install the sharing names and/or directory binding support to the install image
    HandleNetBootClientHelper()
    local tempDir="${1}"
    local targetVol="${2}"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    if [ -e  "${tempDir}/bindingNames.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Directory Service binding information"
    fi
    /usr/bin/ditto $opt "${tempDir}/bindingNames.plist" "${targetVol}/etc/bindingNames.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/etc/bindingNames.plist"
    /bin/chmod 644 "${targetVol}/etc/bindingNames.plist"
    fi
    if [ -e  "${tempDir}/sharingNames.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Sharing Names support"
    fi
    /usr/bin/ditto $opt "${tempDir}/sharingNames.plist" "${targetVol}/etc/sharingNames.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/etc/sharingNames.plist"
    /bin/chmod 644 "${targetVol}/etc/sharingNames.plist"
    fi
    if [ -e  "${tempDir}/NetBootClientHelper" ]; then
    /usr/bin/ditto $opt "${tempDir}/NetBootClientHelper" "${targetVol}/usr/sbin/NetBootClientHelper" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/usr/sbin/NetBootClientHelper"
    /bin/chmod 555 "${targetVol}/usr/sbin/NetBootClientHelper"
    /usr/bin/ditto $opt "${tempDir}/com.apple.NetBootClientHelper.plist" "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
    /bin/chmod 644 "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
    # finally, make sure it isn't disabled...
    /usr/libexec/PlistBuddy -c "Delete :com.apple.NetBootClientHelper" "${targetVol}/var/db/launchd.db/com.apple.launchd/overrides.plist" > /dev/null 2>&1
    fi
    return 0
    # If any exist, install configuration profiles to the install image
    InstallConfigurationProfiles()
    local tempDir="${1}"
    local targetVol="${2}"
    local profilesDir="${targetVol}/var/db/ConfigurationProfiles"
    if [ -e  "${tempDir}/configProfiles.txt" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Configuration Profiles"
    fi
    /bin/mkdir -p "${profilesDir}/Setup" || return 1
    # Make sure the perms are correct
    /usr/sbin/chown root:wheel "${profilesDir}"
    /bin/chmod 755 "${profilesDir}"
    /usr/sbin/chown root:wheel "${profilesDir}/Setup"
    /bin/chmod 755 "${profilesDir}/Setup"
    /usr/bin/touch "${profilesDir}/.profilesAreInstalled"
    CopyEntriesFromFileToPath "${tempDir}/configProfiles.txt" "${profilesDir}/Setup" || return 1
    # Enable MCX debugging
    if [ 1 == 1 ]; then
    if [ -e  "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" ]; then
    /usr/libexec/PlistBuddy -c "Delete :debugOutput" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
    /usr/libexec/PlistBuddy -c "Delete :collateLogs" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
    fi
    /usr/libexec/PlistBuddy -c "Add :debugOutput string -2" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
    /usr/libexec/PlistBuddy -c "Add :collateLogs string 1" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
    fi
    fi
    # Converts a list of scripts (full paths contained in the file at $1) into packages in $3
    InstallScriptsFromFile()
    local tempDir="${1}"
    local theFile="${2}"
    local targetDir="${3}"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Converting scripts into install packages"
    opt="-v"
    fi
    while read FILE
    do
    if [ -e "${FILE}" ]; then
    # make an installer package out of the script
    CreateInstallPackageForScript "$tempDir" "${FILE}" || return 1
    # copy the resulting package to the Packages directory
    local leafName=`basename "${FILE}"`
    /usr/bin/ditto $opt "${tempDir}/${leafName}.pkg" "${targetDir}/${leafName}.pkg" || return 1
    # clean up
    /bin/rm -r "${tempDir}/${leafName}.pkg"
    fi
    done < "${theFile}"
    return 0
    # Prepare the source by deleting stuff we don't want to copy if sourcing a volume
    PostFlightDestination()
    local tempDir="${1}"
    local destDir="${2}"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Performing post install cleanup"
    opt="-v"
    fi
    # delete the DS indices to force reindexing...
    if [ -e "${mountPoint}/var/db/dslocal/indices/Default/index" ]; then
    /bin/rm $opt "${mountPoint}/var/db/dslocal/indices/Default/index"
    fi
    # detach the disk and remove the mount folder
    DetachAndRemoveMount "${mountPoint}"
    if [ $? != 0 ]; then
    echo "Failed to detach and clean up the mount at '${mountPoint}'."
    return 1
    fi
    echo "Correcting permissions. ${ownershipInfoKey} $destDir"
    /usr/sbin/chown -R "${ownershipInfoKey}" "$destDir"
    # Prepare the source by deleting stuff we don't want to copy if sourcing a volume
    PreCleanSource()
    local srcVol="$1"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    if [ -e "$srcVol/private/var/vm/swapfile*" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Removing swapfiles on $1"
    fi
    /bin/rm $opt "$srcVol/private/var/vm/swapfile*"
    fi
    if [ -e "$srcVol/private/var/vm/sleepimage" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Removing sleepimage on $1"
    fi
    /bin/rm $opt "$srcVol/private/var/vm/sleepimage"
    fi
    if [ -d "$srcVol/private/tmp" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out /private/tmp on $1"
    fi
    /bin/rm -r $opt "$srcVol/private/tmp/*" > /dev/null 2>&1
    fi
    if [ -d "$srcVol/private/var/tmp" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out /private/var/tmp on $1"
    fi
    /bin/rm -r $opt "$srcVol/private/var/tmp/*" > /dev/null 2>&1
    fi
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out devices and volumes on $1"
    fi
    if [ -d "$srcVol/Volumes" ]; then
    /bin/rm -r $opt "$srcVol/Volumes/*" > /dev/null 2>&1
    fi
    if [ -d "$srcVol/dev" ]; then
    /bin/rm $opt "$srcVol/dev/*" > /dev/null 2>&1
    fi
    if [ -d "$srcVol/private/var/run" ]; then
    /bin/rm -r $opt "$srcVol/private/var/run/*" > /dev/null 2>&1
    fi
    # Copy kernel and build the kext cache on the boot image
    PrepareKernelAndKextCache()
    local srcDir="$1"
    local destDir="$2"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Preparing the kernel and kext cache for the boot image"
    opt="-v"
    fi
    # Insure the kext cache on our source volume (the boot shell) is up to date
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Updating kext cache on source volume"
    fi
    /usr/sbin/kextcache -update-volume "${srcDir}" || return 1
    # Copy the i386 and, if it exists, the x86_64 architecture
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing the kext cache to the boot image"
    fi
    # make sure this doesn't exist
    if [ -e "${destDir}/i386" ]; then
    /bin/rm -rf "${destDir}/i386"
    fi
    # Install kextcaches to the nbi folder

    After running your command, and using the mounted image as my source for creating the NetRestore image, SIU was able to complete the first two steps, but failed on the rest.  It was able to complete "Creating Image From Source", and "Preparing Image For Restore", but it fails on "Creating Bootable System".
    I've copied and pasted the end of the error log.  Any idea what caused the Bootable System from successfully being created?
    PERCENT:-1.000000
    Finalizing disk image.
    created: /Users/morgan/Desktop/30sept.nbi/System.dmg
    # Set aside the needed BaseSystem.dmg
    retrieveBaseSystemDMG "${1}" || mnrfiErrExit
    + retrieveBaseSystemDMG /tmp/niutemp.3PZq4yzF
    + local tempDir=/tmp/niutemp.3PZq4yzF
    + local opt=
    + '[' disk2s3 '!=' '' ']'
    + '[' DEBUG == VERBOSE -o DEBUG == DEBUG ']'
    + opt=-v
    + echo 'Retrieving BaseSystem bits from Recovery HD'
    Retrieving BaseSystem bits from Recovery HD
    mktemp -d "/tmp/mnt_rp.XXXXXXXX"
    ++ mktemp -d /tmp/mnt_rp.XXXXXXXX
    + recoveryMount=/tmp/mnt_rp.75pVTRHs
    + /usr/sbin/diskutil mount readOnly -mountPoint /tmp/mnt_rp.75pVTRHs disk2s3
    Volume Recovery HD on disk2s3 mounted
    + '[' -e /tmp/mnt_rp.75pVTRHs/com.apple.recovery.boot/BaseSystem.dmg ']'
    + /usr/sbin/diskutil unmount disk2s3
    Volume Recovery HD on disk2s3 unmounted
    + /bin/rmdir /tmp/mnt_rp.75pVTRHs
    + return 0
    # update progress information
    echo "${progressPrefix}_preparingASR_"
    + echo _progress_preparingASR_
    # "Scan the image for restore"
    asr_opt=""
    + asr_opt=
    if [ "${skipReorderingKey}" == 1 ] ; then
    asr_opt="--nostream"
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
    echo "Preparing image for restore without multicast reordering"
    fi
    else
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
    echo "Preparing image for restore"
    fi
    fi
    + '[' 0 == 1 ']'
    + '[' DEBUG == VERBOSE -o DEBUG == DEBUG ']'
    + echo 'Preparing image for restore'
    Preparing image for restore
    /usr/sbin/asr imagescan --source "${destPath}/${dmgContainer}.dmg" $asr_opt || mnrfiErrExit
    + /usr/sbin/asr imagescan --source /Users/morgan/Desktop/30sept.nbi/System.dmg
    Checksumming partition of size 63 blocks...done
    Block checksum: ....10....20....30....40....50....60....70....80....90....100
    Reordering:     ....10....20....30....40....50....60....70....80....90....100asr: successfully scanned image "/Users/morgan/Desktop/30sept.nbi/System.dmg"
    # update progress information
    echo "${progressPrefix}_creatingInstallSystem_"
    + echo _progress_creatingInstallSystem_
    restoreSource="${sourceVol}"
    + restoreSource='/Volumes/Macintosh HD'
    # If this is a restore from install media, mount that as our source
    if [ "${restoreSource}" == "(installMedia)" ] ; then
    sourceMount=`mktemp -d "/tmp/mnt_src.XXXXXXXX"`
    /usr/bin/hdiutil attach "${destPath}/System.dmg" -noverify -owners on -nobrowse -noautoopen -mountpoint "${sourceMount}" -quiet || crfsErrExit
    restoreSource="${sourceMount}"
    fi
    + '[' '/Volumes/Macintosh HD' == '(installMedia)' ']'
    # If we don't have a BaseSystem.dmg available to us fail now.
    if [ ! -e "${1}/BaseSystem.dmg" ]; then
    echo "There is no BaseSystem.dmg (Recovery HD) associated with the source ${restoreSource}."
    crfsErrExit
    fi
    + '[' '!' -e /tmp/niutemp.3PZq4yzF/BaseSystem.dmg ']'
    + echo 'There is no BaseSystem.dmg (Recovery HD) associated with the source /Volumes/Macintosh HD.'
    There is no BaseSystem.dmg (Recovery HD) associated with the source /Volumes/Macintosh HD.
    + crfsErrExit
    basename "${0}"
    ++ basename '/System/Library/CoreServices/System Image Utility.app/Contents/Library/Automator/Create Image.action/Contents/Resources/createRestoreFromSources.sh'
    + echo 'Execution of '\''createRestoreFromSources.sh'\'' failed. Cleaning up.'
    Execution of 'createRestoreFromSources.sh' failed. Cleaning up.
    + DetachAndRemoveMount /tmp/mnt.nfN5nVgM
    + local theMount=/tmp/mnt.nfN5nVgM
    mount | grep "${theMount}"
    ++ mount
    ++ grep /tmp/mnt.nfN5nVgM
    + local mountLoc=
    + '[' DEBUG == VERBOSE -o DEBUG == DEBUG ']'
    + echo 'Detaching disk image'
    Detaching disk image
    + '[' DEBUG == DEBUG ']'
    + /usr/sbin/lsof +fg /tmp/mnt.nfN5nVgM
    + '[' '' '!=' '' ']'
    + /bin/rmdir /tmp/mnt.nfN5nVgM
    + return 0
    + '[' '' '!=' '' ']'
    + /bin/rm -r /Users/morgan/Desktop/30sept.nbi/i386
    + /bin/rm /Users/morgan/Desktop/30sept.nbi/NetInstall.dmg
    + /bin/rm /Users/morgan/Desktop/30sept.nbi/System.dmg
    + /bin/rmdir /Users/morgan/Desktop/30sept.nbi
    + exit 1
    Script is done.
    Bridge exited with status 256
    Failed to create image from restore source.
    An unknown error has occurred.
    An unknown error has occurred.
    Image creation process finished...
    Stopping image creation.
    Image creation failed.
    Thanks.

  • System Image Utility Failing Error 2 Yosemite

    I'm trying to create an net install image of the OS X Yosemite installer. It worked with 10.0, now on 10.0.1 I'm getting an error "System Image Utility Failing Error 2". I've tried it a few different ways but I get the same result every time. Has anyone been able to create a 10.0.1 image?

    After doing all that I described in my previous post three things happened:
    1. I need to proof read better mi writing (I am fluent in english but of course is not my native language).
    2. The NetInstall image I created did work!, but it failed at 99.99% verifying leaving a useless installation. I was able to bring back some computers by reinstalling only the system, but most of them had to be erased and reimaged again.
    And number 3:
    I found another solution that worked fine this time. !!!
    (well, it had a hiccup but not a show stopper)
    What is needed:
    - A known working NetInstall image.
    Steps:
    1. Copy the NetInstall.nbi folder to another location.
    2. Using Disk Utility convert the image file NetInstall.dmg (inside the NetInstall.nbi) to a read/write image, preferably to a sparse image.
    3. Mount the new image and locate the folder 'Packages' inside it (it is invisible in the Finder).
    4. Remove System.dmg
    5. Copy your source image on the same place and make sure it is named System.dmg and is of type read-only / compressed. (If the new image is bigger than the one before, it will be useful that the NetInstall.dmg be a sparse image.)
    6. If the source image was not previously scanned for ASR, do it now.
    7. Unmount the NetInstall disk
    8. Using Disk Utility convert your new NetInstall.dmg to read-only / compressed.
    9. Rename your NetInstall.nbi to YourNewNetInstall.nbi
    10. Edit the file NBImageInfo.plist (inside the YourNewNetInstall.nbi)  and locate the line with the old name of the .nbi and change it to the new one. Locate the "Index" and change it too (maybe simply add 1.) Also, change the line that mentions the System version and change it to the one that the new NetInstall contains (up to only the first decimal.)
    11. Move back YourNewNetInstall.nbi to the NetBootSP0 folder where it came from.
    12. In Server activate your new NetInstall source (you can change the index there too) and update the computers list it will be served to.
    Ready!
    Using this I could reinstall the computers without a problem this time.
    Ok, I said there were a hiccup:
    After finishing, the computers restarted to their recovery partition and a simple restart brought them back to it. Using Disk Utility and verifying the disk was enough to restart them properly.
    Hope this helps.
    Greetings from Mexico!
    Alex Ramos

  • System Image Utility Failing Error 2

    I've built my 10.9.4 gold image on a Macbook Pro, created the image with SIU and deployed successfully to the other Macbooks.   When I went to deploy to the iMacs we have I get the error OSX Could not be installed on your computer.  Did some research and found I needed to install the Combo update if I wanted to deploy to multiple hardware, so installed OSXUpdCombo10.9.4  into the gold machine. Now I can no longer import that with System Image Utility.
    System Image log looks like:
    "/Library/NetBoot/NetBootSP0/IMG-OXL-1094-All.nbi/System.dmg"
    created: /Library/NetBoot/NetBootSP0/IMG-OXL-1094-All.nbi/NetInstall.dmg
    ditto: can't get real path for source '/tmp/mnt_bs.aLkzKL2z/System/Library/CoreServices/PlatformSupport.plist'
    Execution of 'createRestoreFromSources.sh' failed. Cleaning up.
    "disk5" unmounted.
    "disk5" ejected.
    Failed to create image from restore source.
    The operation couldn’t be completed. (System Image Utility error 2.)
    Looks like this can happen if the version of Mavericks on the server and client don't match.  So I've installed the combo updater on the server for good measure.  Still getting the same error.
    Server reports it is running 10.9.4 (13E28),client says the same.
    Any idea where to look next?

    Went back through my notes, I read that you should run the 10.6 combo updater before trying to image, and somehow decided that meant 10.9 :/
    Thanks for the info, that makes sense.  I've had to make separate images for each model this round, but I'll add that info to my notes and do it right next time
    Jase

  • System Image Utility 10.4.11 Gather Image Fails

    Hello,
    I am having some issues with an XServe with 10.4.11 using System Image Utility to try and gather an image from a 10.4.11 computer. Can anyone help?

    2011-01-05 13:29:16 -0500 Mounting image to gather information
    2011-01-05 13:29:19 -0500 /dev/disk5 Applepartitionscheme
    /dev/disk5s1 Applepartitionmap
    /dev/disk5s2 Apple_Driver43
    /dev/disk5s3 AppleDriver43CD
    /dev/disk5s5 AppleDriverATAPI
    /dev/disk5s6 AppleDriverATAPI
    /dev/disk5s7 Apple_Patches
    /dev/disk5s9 Apple_HFS /Volumes/Upper-Left/Library/NetBoot/NetBootSP1/NetInstallMacOSXCom.nbi/mnt
    2011-01-05 13:29:19 -0500 Mounted image to gather information
    2011-01-05 13:29:31 -0500 "disk5" unmounted.
    "disk5" ejected.
    2011-01-05 13:29:31 -0500 Unmounting image...
    2011-01-05 13:29:31 -0500 Image editing cancelled
    2011-01-05 13:29:31 -0500 Click New Install or New Boot button in the toolbar to create another image
    2011-01-05 13:32:14 -0500 Initiating user authentication
    2011-01-05 13:32:27 -0500 Starting image creation
    created:
    2011-01-05 13:50:45 -0500 /Volumes/Upper-Left/Library/NetBoot/NetBootSP1/PPCS2k11/PPCS2K11.nbi/NIUReserve dSystem.dmg
    2011-01-05 13:50:47 -0500 /dev/disk5 /Volumes/Upper-Left/Library/NetBoot/NetBootSP1/PPCS2k11/PPCS2K11.nbi/mnt_blk
    created:
    2011-01-05 14:09:06 -0500 /Volumes/Upper-Left/Library/NetBoot/NetBootSP1/PPCS2k11/PPCS2K11.nbi/PPCS2k11.d mg
    2011-01-05 14:10:06 -0500 Copying /Volumes/PPCS2K11
    2011-01-05 16:23:40 -0500 installer: Package name is SIUExtras
    installer: Installing onto volume mounted at /Volumes/Upper-Left/Library/NetBoot/NetBootSP1/PPCS2k11/PPCS2K11.nbi/mnt.
    installer: The install was successful.
    2011-01-05 16:24:18 -0500 /Volumes/Upper-Left/Library/NetBoot/NetBootSP1/PPCS2k11/PPCS2K11.nbi/mnt/System /Library/Extensions/ACard62xxM.kext/Contents/MacOS/ACard62xxM doesn't contain code for the architecture specified; skipping the kext that contains it
    /Volumes/Upper-/System/Library/Extensions/AppleStorageDrivers.kext/Contents/Plug Ins/AppleHollywood.kext/Contents/MacOS/AppleHollywood doesn't contain code for the architecture specified; skipping the kext that contains it
    /System/Library/Extensions/AppleStorageDrivers.kext/Contents/PlugIns/AppleMemore xCDROMDriver.kext/Contents/MacOS/AppleMemorexCDROMDriver doesn't contain code for the architecture specified; skipping the kext that contains it
    /System/Library/Extensions/AppleStorageDrivers.kext/Contents/PlugIns/CanonEOS1D. kext/Contents/MacOS/CanonEOS1D doesn't contain code for the architecture specified; skipping the kext that contains it
    /System/Library/Extensions/AppleStorageDrivers.kext/Contents/PlugIns/initioFWBri dge.kext/Contents/MacOS/initioFWBridge doesn't contain code for the architecture specified; skipping the kext that contains it
    /System/Library/Extensions/AppleStorageDrivers.kext/Contents/PlugIns/IOFireWireS erialBusProtocolSansPhysicalUnit.kext/Contents/MacOS/IOFireWireSerialBusProtocol SansPhysicalUnit doesn't contain code for the architecture specified; skipping the kext that contains it
    /System/Library/Extensions/AppleStorageDrivers.kext/Contents/PlugIns/LSI-FW-500. kext/Contents/MacOS/LSI-FW-500 doesn't contain code for the architecture specified; skipping the kext that contains it
    /System/Library/Extensions/AppleStorageDrivers.kext/Contents/PlugIns/MKE-LF-D211 A.kext/Contents/MacOS/MKE-LF-D211A doesn't contain code for the architecture specified; skipping the kext that contains it
    /System/Library/Extensions/AppleStorageDrivers.kext/Contents/PlugIns/MKE-SR-8171 .kext/Contents/MacOS/MKE-SR-8171 doesn't contain code for the architecture specified; skipping the kext that contains it
    /System/Library/Extensions/AppleStorageDrivers.kext/Contents/PlugIns/OxfordSemic onductor.kext/Contents/MacOS/OxfordSemiconductor doesn't contain code for the architecture specified; skipping the kext that contains it
    /S/System/Library/Extensions/iPodDriver.kext/Contents/PlugIns/iPodSBCDriver.kext /Contents/MacOS/iPodSBCDriver doesn't contain code for the architecture specified; skipping the kext that contains it
    /System/Library/Extensions/System.kext/PlugIns/BSDKernel.kext/BSDKernel doesn't contain code for the architecture specified; skipping the kext that contains it
    /System/Library/Extensions/System.kext/PlugIns/IOKit.kext/IOKit doesn't contain code for the architecture specified; skipping the kext that contains it
    /System/Library/Extensions/System.kext/PlugIns/Libkern.kext/Libkern doesn't contain code for the architecture specified; skipping the kext that contains it
    /System/Library/Extensions/System.kext/PlugIns/Mach.kext/Mach doesn't contain code for the architecture specified; skipping the kext that contains it
    /System/Library/Extensions/System.kext/PlugIns/System6.0.kext/kernel.6.0 doesn't contain code for the architecture specified; skipping the kext that contains it
    /System/Library/Extensions/System.kext/PlugIns/Unsupported.ke
    2011-01-05 16:24:29 -0500 xt/Unsupported doesn't contain code for the architecture specified; skipping the kext that contains it
    2011-01-05 16:24:42 -0500 chown: /Volumes/Upper-Left/Library/NetBoot/NetBootSP1/PPCS2K11.nbi/mach.macosx.mkext: No such file or directory
    cp:
    2011-01-05 16:24:42 -0500 /Volumes/Upper-Left/Library/NetBoot/NetBootSP1/PPCS2K11.nbi/mnt/mach_kernel: No such file or directory
    2011-01-05 16:24:42 -0500 cp: /Volumes/Upper-Left/Library/NetBoot/NetBootSP1/PPCS2K11.nbi/mnt/mach_kernel: No such file or directory
    2011-01-05 16:24:44 -0500 hdid: attach failed - No such file or directory
    2011-01-06 09:14:55 -0500 Unmounting image...
    2011-01-06 09:14:55 -0500 Error creating Image. This image is not usable

  • System Image Utility fails to create boot image

    I am not able to successfully build a boot image with the System Image Utility. The build starts and runs for about 1 minute and then I get 100's of ditto messages saying "No space left on device". There's plenty of space left on the device. Eventually I get a GUI message stating the there was an error creating the image. The image is of course unusable. This only happens on a Boot image. I have no problem making an install image from the same source. Is it just me??
    Xserve G5 Dual   Mac OS X (10.4.5)  

    I had simililar problems with much headscratching as the result.
    I found that whenever I tried to create a boot image with System Image Utility (SIU) using an image file of my existing system as the source SIU would fail with the annoying "No space left on device" message everytime. I did a little investigating and found that SIU always created a 400 MB disk image file to copy to. So the error message was correct as my source was way over 4 GB.
    I checked the manual and found the embarrasingly simple solution. It's not mentioned directly, rather it is stated that when you want to create an boot image from an existing system you should boot the machine containing the desired system on disk from an alternate source and the run SIU on that machine. The "trick" is that you're running SIU with the existing system mounted as a disk.
    So I went back to my Xserve, mounted the image so it appeared on the desktop. Ran SIU and chose the mounted volume as the source instead of the image file, and hey presto!
    MacBook Pro, Xserve, eMac, iMac... any Mac I can get my hands on   Mac OS X (10.4.6)  

  • System Image Utility 10.6.3 - fails when creating NetBoot image from DVD

    System Image Utility 10.6.3, trying to create a NetBoot image from a bundled installer disc that came with a 27" Late 2009 iMac (iMac11,1). Image creation fails consistently, since the image that System Image Utility creates is only 901M.
    Anyone see this before?
    Don
    --------- System Image Utility log ----------
    Workflow Started (2010-06-16 14:03:02 -0700)
    Starting action: Define Image Source
    Finished running action: Define Image Source
    Starting action: Create Image
    Starting image creation process...
    Create NetBoot Image
    Initiating NetBoot from Install Media.
    Creating working path at /Library/NetBoot/NetBootSP0/NetBoot of Mac OS X Install DVD
    Creating disk image (Size: 901 MB)
    Finalizing disk image.
    created: /Library/NetBoot/NetBootSP0/NetBoot of Mac OS X Install DVD/NetBoot.dmg
    Attaching disk image
    Installing to destination volume
    2010-06-16 14:03:38.126 installer[2365:6f03] Looking for system packages
    2010-06-16 14:03:38.129 installer[2365:6f03] no system packages found
    2010-06-16 14:03:38.130 installer[2365:6f03] No or Invalid system receipts found on /private/tmp/mnt.LjFArn
    2010-06-16 14:03:38.130 installer[2365:6f03] Attempting fallback using: /System/Library/PrivateFrameworks/SystemMigration.framework/Resources/FallbackS ystemFiles.plist
    2010-06-16 14:03:38.175 installer[2365:6f03] Finding system files...
    2010-06-16 14:03:38.619 installer[2365:6f03] Writing system path cache.
    2010-06-16 14:03:38.623 installer[2365:6f03] Error writing cache to /private/tmp/mnt.LjFArn/Library/Caches/com.apple.FindSystemFiles.plist
    2010-06-16 14:03:38.625 installer[2365:6f03] Failed to enumerate /tmp/mnt.LjFArn/Library/Caches, cannot prune (
    "com.apple.userpictureCache"
    installer: Package name is Mac OS X
    installer: Installing at base path /private/tmp/mnt.LjFArn
    installer: The install failed (There is not enough space on this disk to install the selected items. Deselect at least 6.46 GB and try again.)
    Script is done.
    NetBoot creation failed.
    Image creation process finished...
    Stopping image creation.
    Image creation failed.

    Brian Nesse wrote:
    Hi Don, here's my guess...
    The 901 number is additional space added in the scripts. This indicates that the source image size was 0.
    Since you are making a NetBoot from Install media, under the covers the installer process is being run to create a NetBoot volume. The media shipped with the 27" iMac is most likely CPU specific and thus the installation fails because you are trying to create the image (i.e. install the system) on an unsupported CPU.
    In order to produce a NetBoot from the install media, you'll have to create it on the 27" iMac.
    Hi Brian,
    Thanks for the response. This makes perfect sense. I'll give this a try and shout back!
    Thanks,
    Don

  • Can I create a system image with System Image Utility and then transfer the image folder to another server?

    I am currently in the process of creating several images to restore for classroom purposes. I am wondering if it is possible to use the System Image Utility on a computer which has Server Admin Tools installed, then transfer that image folder directly to the "NetBoot" folder on our current Apple Netboot Server. Has anyone tried this and/or succeeded? I'd like to get some feedback before attempting it myself on our college's netboot server. Thanks!

    We've run into a few problems concerning this process. When we create the image on a seperate machine from the server using SIU and then place it in the NetBoot folder, not every .nbi folder created works properly. We're running into errors that say "Could not find any scan information. The source needs to be imagescanned before it can be restored". This does not happen with every image, but it does happen with computers which have a lot of programs installed on them. Is there a way to imagescan the .nbi folder and/or resolve this issue without going through the process of making a completely new NetRestore image?

  • System Deployment with 10.5 Server System Image Utility

    I am trying to image a classroom lab of iMacs and I'm getting nowhere mighty fast.
    I have created the 10.5 client image on a test machine and had it placed on test for students and faculty. After the image was tested for stability I was ready to create the image for deployment. In the past I had used Bombich's NetRestore to deploy images but have found it to be incompatible with 10.5, as it will not resolve the Leopard ByHost file problem correctly. While I can create a Net Install image using the 10.5 System Image Utility I can't determine how to deploy it with multicast ASR. As least from what things appear, the Net Install will run as a unicast and if I try to run it on a number of machines it will bog down the network so severely that it will be impossible to deploy the image - at least this is my understanding.
    The last time I had assistance from our regional Apple System Engineer he informed me of an application call Proton Pack, but I can neither get the application to recognize the image nor do I understand how the main issue, the ByHost file, will be corrected without any sort of post-install action taking place since as far as I know mASR on the client only "grabs" the image and doesn't to anything more. I had emailed our System Engineer twice and have yet to hear from him. I can't let this go much longer.
    The frustration is mounting as those above me want these machines deployed and there always seems to be problems with this. There are great and robust solutions in the Windows world, how come there isn't anything as simple and elegant as the likes of Ghost? At this point I'm about at my wit's end and find myself cursing the very platform that I had been championing for more than 24 years.

    Jeff Kelleher wrote:
    Believe me, I share some of your frustrations. But ranting here after folks, meaning to be helpful by offering suggestions, maybe isn;t what this forum is best suited for.
    I'm not ranting after the folks here, I am attempting to make a point and my point is that the tools available are inadequate for the purpose. Do you really think a company should hinge a deployment strategy on tools either developed as "shareware/freeware" or a feature set that claims it works but doesn't?
    Jeff Kelleher wrote:
    Again, let me state that I've been frustrated by OS X Server. I applaud you for speaking directly to Apple for solutions. Ranting to people who try to offer solutions won't help.
    Sorry to vent, but I have just grown tired of the excuses. Even my sales rep is quick to try to point the finger elsewhere. I have been exposed to for the shortcoming of a consumer platform that is suppose to be targeted toward K-12 and businesses. If Apple is serious in being in the enterprise markets they need to have a decent, reliable tool, be it something from them or another vendor. Ghost for the Mac is a no-brainer, as I'm sure I'm not the only one who has wasted time with the pitfalls of Mac deployment. I know I can't be the only one who is frustrated by the less than optimal methodology to rolling out Macs in this manner.
    Jeff Kelleher wrote:
    Believe me, I share some of your frustrations. But ranting here after folks, meaning to be helpful by offering suggestions, maybe isn;t what this forum is best suited for.
    I'm not ranting after the folks here, I am attempting to make a point. My point is that the tools given aren't worth beans. I had been a champion of Apple since 1980 and a certified tech since 1981 (starting with the Apple II platform) and while many things have improved dramatically through the years this is one area that has lagged behind for some time.
    Jeff Kelleher wrote:
    Finally, deploying 30 Macs is, like it or not, a small venture. 100's or 1000's is a lot.
    Sure, 30 may be small, but how likely am I to deploy a district's worth of these machines if the tools available make deploying Wondows machines such a breeze by comparison? I think somebody's cutting their own throat and it's not Mr. Gates.
    foilpan wrote:
    it's possible that your energy could be better spent solving the issue and moving on rather than blaming apple for not doing what you want out of the box. if your job is to deploy 30 macs, just do it however possible and spend time later to refine the process. you can easily finish that job in a day (or way less) with proper prep.
    This is a reoccurring scenario with Mac deployments which is getting old and tired. I'm up to the point to let these machines sit in the boxes since my time could be better used to support PCs.
    Sadly it seems most people are missing the point that the tools that are suppose to make this work, don't. If you have the patience to work around these shortcoming, that's good. If you have the knowledge of being able to script your way around the areas where the tools promise something but don't carry through, you score more points. I, for one, don't have the luxury of time on my side, being dealt a multitude of district responsibilities that include areas besides PC and Mac support.
    foilpan wrote:
    another option is to hire apple or an outside consultant who may be able to help if you don't have the scripting experience in house to do what you need.
    That's a great idea. Unfortunately with the state of school budgets it's quite unlikely this will happen in the near future.

  • System Image Utility broken?

    I imported my 10.5 workflow into the new System Image Utility and created a NetRestore (and NetInstall to test) image of a fresh 10.6 installation. Workflow is like this:
    1. define image source
    2. automatic installation (delete harddrive "Macintosh HD", language "German")
    3. Apply systemconfiguration (host specific settings after installation)
    4. Create image (type netrestore)
    Image builds fine but the restore process stops after a while. Thats the rror log:
    Sep 3 06:41:43 localhost Unknown[89]: Launching the Installer using /etc/minstallconfig.xml file with language German.
    Sep 3 06:42:07 localhost OSInstaller[90]: Folder Manager is being asked to create a folder (cach) while running as uid 0
    Sep 3 06:42:07 localhost configd[66]: subnetroute_ifindex: can't get interface name
    Sep 3 06:42:08 localhost OSInstaller[90]: Mac OS X Installer application started
    Sep 3 06:42:08 localhost OSInstaller[90]: 1 display(s) found.
    Sep 3 06:42:08 localhost OSInstaller[90]: Display[1] is using OpenGL acceleration.
    Sep 3 06:42:08 localhost OSInstaller[90]: @(#)PROGRAM:Install PROJECT:Install-572
    Sep 3 06:42:08 localhost OSInstaller[90]: @(#)PROGRAM:Mac OS X Installer PROJECT:OSInstaller-255
    Sep 3 06:42:08 localhost OSInstaller[90]: Hardware: MacBookPro5,4 @ 2.53 GHz (x 2), 4096 MB RAM
    Sep 3 06:42:08 localhost OSInstaller[90]: Running OS Build: Mac OS X 10.6 (10A432)
    Sep 3 06:42:08 localhost OSInstaller[90]: Env: DYLDNO_FIXPREBINDING=1
    Sep 3 06:42:08 localhost OSInstaller[90]: Env: PATH=/usr/bin:/bin:/usr/sbin:/sbin
    Sep 3 06:42:08 localhost OSInstaller[90]: Env: PWD=/
    Sep 3 06:42:08 localhost OSInstaller[90]: Env: SHLVL=1
    Sep 3 06:42:08 localhost OSInstaller[90]: Env: _=/System/Installation/CDIS/Mac OS X Installer.app/Contents/MacOS/Mac OS X Installer
    Sep 3 06:42:09 localhost OSInstaller[90]: Automated Install: Found requested target at /Volumes/Macintosh HD.
    Sep 3 06:42:10 localhost OSInstaller[90]: Allowing machine sleep.
    Sep 3 06:42:10 localhost OSInstaller[90]: Preventing machine sleep.
    Sep 3 06:42:10 localhost OSInstaller[90]: InstallerStatusNotifications plugin loaded
    Sep 3 06:42:10 localhost OSInstaller[90]: =============================================================================== =
    Sep 3 06:42:10 localhost OSInstaller[90]: Choices selected for installation:
    Sep 3 06:42:10 localhost OSInstaller[90]: Installieren: "Apple Software Restore Image"
    Sep 3 06:42:10 localhost OSInstaller[90]: ASRInstall.pkg : com.apple.server.ASRPackage : 1.0.0.4380000.0
    Sep 3 06:42:10 localhost OSInstaller[90]: =============================================================================== =
    Sep 3 06:42:10 localhost OSInstaller[90]: It took 0.00 seconds to summarize the package selections.
    Sep 3 06:42:10 localhost OSInstaller[90]: Memory statistics for 'Installation' pane:
    Sep 3 06:42:10 localhost OSInstaller[90]: Physical Memory Allocation: 492 MB wired, 257 MB trapped, 71 MB active, 40 MB inactive, 3236 MB free, 3347 MB usable, 4096 MB total
    Sep 3 06:42:10 localhost OSInstaller[90]: Remote Install Assistant found at 1024:(null)
    Sep 3 06:42:10 localhost OSInstaller[90]: Memory statistics for 'Mac OS X Installation' pane:
    Sep 3 06:42:10 localhost OSInstaller[90]: Physical Memory Allocation: 495 MB wired, 257 MB trapped, 72 MB active, 40 MB inactive, 3232 MB free, 3344 MB usable, 4096 MB total
    Sep 3 06:42:11 localhost OSInstaller[90]: -[IFPKGDerivedDocument sortedPackageLocations]: result = (\n "file://localhost"\n)
    Sep 3 06:42:11 localhost runner[133]: Administrator authorization granted.
    Sep 3 06:42:11 localhost OSInstaller[90]: PK will install package file://localhost/System/Installation/Packages/ASRInstall.pkg (0 b)
    Sep 3 06:42:11 localhost OSInstaller[90]: Total install size including padding: 1073741824 b
    Sep 3 06:42:11 localhost OSInstaller[90]: Starting installation:
    Sep 3 06:42:11 localhost OSInstaller[90]: Calculating expected install size requirements
    Sep 3 06:42:11 localhost Unknown[91]: 2009-09-03 08:42:11.562 Mac OS X Installer[90:a303] Looking for system packages
    Sep 3 06:42:11 localhost Unknown[91]: 2009-09-03 08:42:11.775 Mac OS X Installer[90:a303] Finding system files...
    Sep 3 06:42:15 localhost Unknown[91]: 2009-09-03 08:42:15.198 Mac OS X Installer[90:a303] Writing system path cache.
    Sep 3 06:42:47 localhost OSInstaller[90]: Initial free size : 223.91 GB
    Sep 3 06:42:47 localhost OSInstaller[90]: Expected system size : 9.49 GB
    Sep 3 06:42:47 localhost OSInstaller[90]: * No package reference found for com.apple.server.ASRPackage -- 1.0.0.4380000.0
    Sep 3 06:42:47 localhost OSInstaller[90]: Reserving 1073741824 for extraction
    Sep 3 06:42:47 localhost OSInstaller[90]: Reserving 0 for download
    Sep 3 06:42:47 localhost OSInstaller[90]: Performing volume consistency check on 'Macintosh HD'.
    Sep 3 06:42:59 localhost OSInstaller[90]: Checking Volume
    Sep 3 06:42:59 localhost OSInstaller[90]: HFS+ Volume (Journaled) überprüfen.
    Sep 3 06:42:59 localhost OSInstaller[90]: Zusatzdatei für Dateiaufbau wird überprüft.
    Sep 3 06:42:59 localhost OSInstaller[90]: Katalog wird überprüft.
    Sep 3 06:43:07 localhost OSInstaller[90]: Multi-Link-Dateien werden überprüft.
    Sep 3 06:43:07 localhost OSInstaller[90]: Kataloghierarchie wird überprüft.
    Sep 3 06:43:25 localhost OSInstaller[90]: Datei für erweiterte Attribute wird überprüft.
    Sep 3 06:43:31 localhost OSInstaller[90]: Volume-Bitmap wird überprüft.
    Sep 3 06:43:31 localhost OSInstaller[90]: Informationen des Volumes werden überprüft.
    Sep 3 06:43:31 localhost OSInstaller[90]: Das Volume „Macintosh HD“ ist anscheinend in Ordnung.
    Sep 3 06:43:32 localhost OSInstaller[90]: Reparatur des Volumes abgeschlossen.
    Sep 3 06:43:32 localhost OSInstaller[90]: Boot-Support-Partitionen nach Bedarf für das Volume aktualisieren.
    Sep 3 06:43:32 localhost OSInstaller[90]: Volume passed consistency checks.
    Sep 3 06:43:32 localhost OSInstaller[90]: Copying/Downloading selected packages locally
    Sep 3 06:43:32 localhost OSInstaller[90]: Creating mutable product on /Volumes/Macintosh HD/Mac OS X Install Data
    Sep 3 06:43:32 localhost OSInstaller[90]: Using packages from product at /Volumes/Macintosh HD/Mac OS X Install Data
    Sep 3 06:43:32 localhost OSInstaller[90]: Linked to PackageKit-65
    Sep 3 06:43:32 localhost OSInstaller[90]: Remote package size (0) : available size (223909355520)
    Sep 3 06:43:32 localhost OSInstaller[90]: Copying remote packages (0) to mutable product.
    Sep 3 06:43:32 localhost OSInstaller[90]: Preparing previous system for upgrade
    Sep 3 06:43:32 localhost OSInstaller[90]: Did not move file from: /Volumes/Macintosh HD/Desktop DF to: /Volumes/Macintosh HD/Recovered Items/Desktop DF\nReason: Die Datei „Desktop DF“ existiert nicht.
    Sep 3 06:43:32 localhost OSInstaller[90]: Did not move file from: /Volumes/Macintosh HD/.com.apple.timemachine.supported to: /Volumes/Macintosh HD/Recovered Items/.com.apple.timemachine.supported\nReason: Die Datei „.com.apple.timemachine.supported“ existiert nicht.
    Sep 3 06:43:32 localhost OSInstaller[90]: Did not move file from: /Volumes/Macintosh HD/Previous Systems to: /Volumes/Macintosh HD/Recovered Items/Previous Systems\nReason: Die Datei „Previous Systems“ existiert nicht.
    Sep 3 06:43:32 localhost OSInstaller[90]: Did not move file from: /Volumes/Macintosh HD/.Archived_Directories^M to: /Volumes/Macintosh HD/Recovered Items/.Archived_Directories^M\nReason: Die Datei „.Archived_Directories^M“ existiert nicht.
    Sep 3 06:43:32 localhost OSInstaller[90]: Did not move file from: /Volumes/Macintosh HD/Desktop DB to: /Volumes/Macintosh HD/Recovered Items/Desktop DB\nReason: Die Datei „Desktop DB“ existiert nicht.
    Sep 3 06:43:32 localhost OSInstaller[90]: Did not move file from: /Volumes/Macintosh HD/Previous System to: /Volumes/Macintosh HD/Recovered Items/Previous System\nReason: Die Datei „Previous System“ existiert nicht.
    Sep 3 06:43:32 localhost OSInstaller[90]: Did not move file from: /Volumes/Macintosh HD/.TemporaryItems to: /Volumes/Macintosh HD/Recovered Items/.TemporaryItems\nReason: Die Datei „.TemporaryItems“ existiert nicht.
    Sep 3 06:43:32 localhost OSInstaller[90]: Did not move file from: /Volumes/Macintosh HD/mach.sym to: /Volumes/Macintosh HD/Recovered Items/mach.sym\nReason: Die Datei „mach.sym“ existiert nicht.
    Sep 3 06:43:32 localhost OSInstaller[90]: Did not move file from: /Volumes/Macintosh HD/Shutdown Check to: /Volumes/Macintosh HD/Recovered Items/Shutdown Check\nReason: Die Datei „Shutdown Check“ existiert nicht.
    Sep 3 06:43:32 localhost OSInstaller[90]: Did not move file from: /Volumes/Macintosh HD/Trash to: /Volumes/Macintosh HD/Recovered Items/Trash\nReason: Die Datei „Trash“ existiert nicht.
    Sep 3 06:43:32 localhost OSInstaller[90]: Did not move file from: /Volumes/Macintosh HD/cores to: /Volumes/Macintosh HD/Recovered Items/cores\nReason: Die Datei „cores“ existiert nicht.
    Sep 3 06:43:32 localhost OSInstaller[90]: Did not move file from: /Volumes/Macintosh HD/Backups.backupdb to: /Volumes/Macintosh HD/Recovered Items/Backups.backupdb\nReason: Die Datei „Backups.backupdb“ existiert nicht.
    Sep 3 06:43:32 localhost OSInstaller[90]: Did not move file from: /Volumes/Macintosh HD/Network Trash Folder to: /Volumes/Macintosh HD/Recovered Items/Network Trash Folder\nReason: Die Datei „Network Trash Folder“ existiert nicht.
    Sep 3 06:43:32 localhost OSInstaller[90]: Did not move file from: /Volumes/Macintosh HD/AppleShare PDS to: /Volumes/Macintosh HD/Recovered Items/AppleShare PDS\nReason: Die Datei „AppleShare PDS“ existiert nicht.
    Sep 3 06:43:32 localhost OSInstaller[90]: Did not move file from: /Volumes/Macintosh HD/TheVolumeSettingsFolder to: /Volumes/Macintosh HD/Recovered Items/TheVolumeSettingsFolder\nReason: Die Datei „TheVolumeSettingsFolder“ existiert nicht.
    Sep 3 06:43:32 localhost OSInstaller[90]: Did not move file from: /Volumes/Macintosh HD/Temporary Items to: /Volumes/Macintosh HD/Recovered Items/Temporary Items\nReason: Die Datei „Temporary Items“ existiert nicht.
    Sep 3 06:43:32 localhost OSInstaller[90]: Did not move file from: /Volumes/Macintosh HD/automount to: /Volumes/Macintosh HD/Recovered Items/automount\nReason: Die Datei „automount“ existiert nicht.
    Sep 3 06:43:32 localhost OSInstaller[90]: Did not move file from: /Volumes/Macintosh HD/Cleanup At Startup to: /Volumes/Macintosh HD/Recovered Items/Cleanup At Startup\nReason: Die Datei „Cleanup At Startup“ existiert nicht.
    Sep 3 06:43:32 localhost OSInstaller[90]: Did not move file from: /Volumes/Macintosh HD/Previous Systems.localized to: /Volumes/Macintosh HD/Recovered Items/Previous Systems.localized\nReason: Die Datei „Previous Systems.localized“ existiert nicht.
    Sep 3 06:43:32 localhost OSInstaller[90]: Did not move file from: /Volumes/Macintosh HD/TheFindByContentFolder to: /Volumes/Macintosh HD/Recovered Items/TheFindByContentFolder\nReason: Die Datei „TheFindByContentFolder“ existiert nicht.
    Sep 3 06:43:32 localhost OSInstaller[90]: Did not move file from: /Volumes/Macintosh HD/AppleInternal to: /Volumes/Macintosh HD/Recovered Items/AppleInternal\nReason: Die Datei „AppleInternal“ existiert nicht.
    Sep 3 06:43:32 localhost OSInstaller[90]: Did not move file from: /Volumes/Macintosh HD/VM Storage to: /Volumes/Macintosh HD/Recovered Items/VM Storage\nReason: Die Datei „VM Storage“ existiert nicht.
    Sep 3 06:43:32 localhost OSInstaller[90]: Configuring volume "Macintosh HD"
    Sep 3 06:43:32 localhost OSInstaller[90]: Preparing disk for Netbooted OS Install.
    Sep 3 06:43:32 localhost OSInstaller[90]: Volume disk0s2 mounted at /Volumes/Macintosh HD is ready
    Sep 3 06:43:32 localhost OSInstaller[90]: Preparing disk for local booted OS Install.
    Sep 3 06:43:32 localhost OSInstaller[90]: Physical memory statistics immediately before turning on virtual memory backing store:
    Sep 3 06:43:32 localhost OSInstaller[90]: Physical Memory Allocation: 1047 MB wired, 259 MB trapped, 75 MB active, 7 MB inactive, 2708 MB free, 2790 MB usable, 4096 MB total
    Sep 3 06:43:32 localhost OSInstaller[90]: Activated virtual memory backing store at mount point '/Volumes/Macintosh HD'
    Sep 3 06:43:32 localhost OSInstaller[90]: Preparing disk for local booted install.
    Sep 3 06:43:32 localhost OSInstaller[90]: Creating installation log on volume "Macintosh HD"
    Sep 3 06:43:32 localhost OSInstaller[90]: Reaping previous system
    Sep 3 06:45:15 localhost OSInstaller[90]: System Reaper: free space before: 223.91 GB
    Sep 3 06:45:15 localhost OSInstaller[90]: System Reaper: free space after : 232.92 GB
    Sep 3 06:45:15 localhost OSInstaller[90]: System Reaper: free space diff : 9.01 GB
    Sep 3 06:45:15 localhost OSInstaller[90]: System Reaper: Postflight ok (231.95 GB remaining)
    Sep 3 06:45:15 localhost OSInstaller[90]: IFPKInstallElement (1 packages)
    Sep 3 06:45:15 localhost OSInstaller[90]: PackageKit: ----- Begin install -----
    Sep 3 06:45:15 localhost OSInstaller[90]: PackageKit: request=PKInstallRequest <1 packages, destination=/Volumes/Macintosh HD>
    Sep 3 06:45:15 localhost OSInstaller[90]: PackageKit: packages=(\n "PKJaguarPackage <file://localhost/System/Installation/Packages/ASRInstall.pkg>"\n)
    Sep 3 06:45:16 localhost OSInstaller[90]: PackageKit: updatedyld_sharedcache -root /Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root
    Sep 3 06:45:16 localhost OSInstaller[90]: updatedyld_sharedcache failed: /Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root/var/db/dyld/sharedregionroots/ does not exist, errno=2
    Sep 3 06:45:16 localhost OSInstaller[90]: updatedyld_sharedcache exited with 1
    Sep 3 06:45:16 localhost OSInstaller[90]: PackageKit: Shoving /Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root (0 items) to /Volumes/Macintosh HD
    Sep 3 06:45:16 localhost OSInstaller[90]: PackageKit: kextcache -update-volume /Volumes/Macintosh HD
    Sep 3 06:45:16 localhost OSInstaller[90]: kextcache: /Volumes/Macintosh HD: no /usr/standalone/bootcaches.plist; nothing to do.
    Sep 3 06:45:16 localhost OSInstaller[90]: Installed "Apple Software Restore Image" ()
    Sep 3 06:45:16 localhost OSInstaller[90]: PackageKit: ----- End install -----
    Sep 3 06:45:16 localhost OSInstaller[90]: Writing installation cookies
    Sep 3 06:45:16 localhost OSInstaller[90]: Could not write configuration file /Volumes/Macintosh HD/Library/Preferences/.GlobalPreferences.plist
    Sep 3 06:45:16 localhost OSInstaller[90]: Unable to write InstallType cookie file for Setup Assistant to pick up.
    Sep 3 06:45:16 localhost OSInstaller[90]: Finalize disk "Macintosh HD" for OS Installation
    Sep 3 06:45:16 localhost OSInstaller[90]: Finalizing Disk for OS Install
    Sep 3 06:45:17 localhost OSInstaller[90]: Unable to set 'Macintosh HD' as boot disk: The bless tool was unable to set the current boot disk
    Sep 3 06:45:17 localhost OSInstaller[90]: Install failed: Das Installationsprogramm konnte den Computer nicht vom Volume „Macintosh HD“ starten. Versuchen Sie, das Volume mithilfe des Dienstprogramms „Startvolume“ auszuwählen.
    Sep 3 06:45:18 localhost OSInstaller[90]: Allowing machine sleep.
    Sep 3 06:45:18 localhost OSInstaller[90]: Memory statistics for 'Installation ist fehlgeschlagen' pane:
    Sep 3 06:45:18 localhost OSInstaller[90]: Physical Memory Allocation: 562 MB wired, 259 MB trapped, 283 MB active, 27 MB inactive, 2965 MB free, 3275 MB usable, 4096 MB total
    Any ideas to solve this? The netboot server is still on 10.5 - does this matter?
    Thanks, Kai

    I'm having a similar problem on a 10.5.8 server.
    I've successfully created a NetInstall image on a 10.6.1 Mac using SIU (image created from a mini in Target Disk mode). I created a new Workflow for an unattended install that formats the client drive. Also, this was the only way to get the NetInstall option (since was grayed out on the initial screen at launch).
    My logs on the client machine look like yours. It gets about 485 Mb into the process, and fails. A NetRestore image yields the same results.
    My next step is to create a 10.6.1 NetBoot image and see if that works. I have Snow Leopard Server on order, but I'd like to do some imaging tests before we upgrade our server.

  • System Image Utility - Takes FOREVER

    13 hours ago, I asked System Image Utility 10.5 to create a NetInstall image of a 75GB Leopard partition. It's only 40% done. It's definately working on it (ie the percentages increase) but this seems ridiculous.
    Source System: iMac 20" Intel Core Duo 2. In Target Disk Mode connected to a MacBook Pro running leopard client with Server Tools downloaded from Apple's site.
    Both systems, Leopard retail.
    Image is being saved to an attached USB drive (attached to the Macbook Pro).
    Any ideas why this is so slow?
    Thanks
    Woody

    Looking at my System log, it appears the image creation took 4 hours 13 minutes (I started it as I left work). More interesting errors:
    Nov 1 18:19:45 host-46-132 System Image Utility[7963]: Assistant - Selected source:"NetBoot of Macintosh HD 1".
    Nov 1 18:20:32 host-46-132 System Image Utility[7973]: Assistant - Selected source:"NetBoot of Macintosh HD 1".
    Nov 1 18:20:32 host-46-132 System Image Utility[7973]: The action “Enable or Disable Tracks” could not be loaded because QuickTime Pro is required.
    Nov 1 18:20:32 host-46-132 System Image Utility[7973]: The action “Export Movies” could not be loaded because QuickTime Pro is required.
    Nov 1 18:20:32 host-46-132 System Image Utility[7973]: The action “Hint Movies” could not be loaded because QuickTime Pro is required.
    Nov 1 18:20:32 host-46-132 System Image Utility[7973]: The action “New Audio Capture” could not be loaded because QuickTime Pro is required.
    Nov 1 18:20:32 host-46-132 System Image Utility[7973]: The action “New Video Capture” could not be loaded because QuickTime Pro is required.
    Nov 1 18:20:32 host-46-132 System Image Utility[7973]: The action “Pause Capture” could not be loaded because QuickTime Pro is required.
    Nov 1 18:20:32 host-46-132 System Image Utility[7973]: The action “Play Movies” could not be loaded because QuickTime Pro is required.
    Nov 1 18:20:32 host-46-132 System Image Utility[7973]: The action “Start Capture” could not be loaded because QuickTime Pro is required.
    Nov 1 18:20:32 host-46-132 System Image Utility[7973]: The action “Stop Capture” could not be loaded because QuickTime Pro is required.
    Nov 1 18:20:32 host-46-132 System Image Utility[7973]: The action “Show Growl Notification” could not be loaded because the file “/Library/PreferencePanes/Growl.prefPane” was not found.
    Nov 1 18:20:33 host-46-132 System Image Utility[7973]: Could not find image named 'splitterHandle'.
    Nov 1 18:21:55 host-46-132 System Image Utility[7973]: Workflow Started
    Nov 1 18:21:55 host-46-132 System Image Utility[7973]: Starting action: Define Image Source
    Nov 1 18:21:55 host-46-132 System Image Utility[7973]: Finished running action: Define Image Source
    Nov 1 18:21:55 host-46-132 System Image Utility[7973]: Starting action: Create Image
    Nov 1 18:22:00 host-46-132 KernelEventAgent[52]: tid 00000000 received unknown event (256)
    Nov 1 18:22:00 host-46-132 authexec[7985]: executing /Applications/Server/System Image Utility.app/Contents/Library/Automator/Create Image.action/Contents/Resources/bridge
    Nov 1 18:22:00 host-46-132 bridge[7985]: Bridge is launching external task.
    Nov 1 18:22:00 host-46-132 [0x0-0x2d52d5].com.apple.server.SystemImageUtility[7973]: 2007-11-01 18:22:00.668 bridge[7985:913] Bridge is launching external task.
    Nov 1 18:22:01 host-46-132 hdiejectd[7993]: running
    Nov 1 18:22:02 host-46-132 com.apple.KernelEventAgent[52]: KernelEventAgent: sysctl_queryfs: No such file or directory
    Nov 1 18:22:02 host-46-132 kernel[0]: hfs: Initializing the journal (joffset 0x76000 sz 0x800000)...
    Nov 1 18:22:19 host-46-132 diskarbitrationd[59]: DiskManagementTool [7982]:50079 not responding.
    Nov 1 18:22:28 host-46-132 com.apple.launchd[399] (0x10f130.Locum[8005]): Exited: Terminated
    Nov 1 18:22:35 host-46-132 diskarbitrationd[59]: DiskManagementTool [7982]:50783 not responding.
    Nov 1 18:22:35 host-46-132 hdiejectd[8006]: running
    Nov 1 18:22:35 host-46-132 KernelEventAgent[52]: tid 00000000 received unknown event (256)
    Nov 1 18:22:36 host-46-132 kernel[0]: hfs: disabling journaling for mount @ 0x98df000
    Nov 1 21:40:40 host-46-132 kernel[0]: hfs: Initializing the journal (joffset 0x75 sz 0x800000)...
    Nov 1 21:40:42 host-46-132 notifyd[12]: EV_DELETE failed for file watcher 65
    Nov 1 21:40:43 host-46-132 kextd[10]: couldn't respond to filesystem change notification!
    Nov 1 21:40:44: --- last message repeated 1 time ---
    Nov 1 21:40:44 host-46-132 hdiejectd[8278]: running
    Nov 1 21:57:53 host-46-132 hdiejectd[8313]: running
    Nov 1 21:57:53 host-46-132 KernelEventAgent[52]: tid 00000000 received unknown event (12)
    Nov 1 22:23:49 host-46-132 hdiejectd[8359]: running
    Nov 1 22:23:52 host-46-132 com.apple.launchd[1] (com.apple.hdiejectd): Throttling respawn: Will start in 7 seconds
    Nov 1 22:24:03 host-46-132 hdiejectd[8373]: running
    Nov 1 22:24:07 host-46-132 fseventsd[56]: log dir: /Users/ben/Documents/Generic 10.5 (beta)/mnt/.fseventsd getting new uuid: 275BD72D-8EED-4DC8-8A05-D7035EA72B5D
    Nov 1 22:32:44 host-46-132 bridge[7985]: Bridge finished
    Nov 1 22:32:44 host-46-132 [0x0-0x2d52d5].com.apple.server.SystemImageUtility[7973]: 2007-11-01 22:32:44.644 bridge[7985:913] Bridge finished
    Nov 1 22:32:45 host-46-132 System Image Utility[7973]: Failed to create image from script createNetRestore.sh.
    Nov 1 22:32:46 host-46-132 KernelEventAgent[52]: tid 00000000 received unknown event (256)
    Nov 1 22:33:23 host-46-132 fseventsd[56]: Events arrived for /Users/ben/Documents/Generic 10.5 (beta)/mnt after an unmount request! Re-initializing.

  • System Image Utility - universal_boot option only on Intel machines

    I'm using System Image Utility on 1.8 GHz PowerPC G5 running Mac OS X Server version 10.5.2. When I try to create a NetBoot image with the standard settings (no customization) and a Mac OS X 10.5 Install DVD, I get the following message:
    updatedyld_sharedcache failed: universal_boot option can only be used on intel machines
    The rest of the log is below; any help you can provide would be appreciated. Thanks!
    Log:
    Starting image creation.
    Workflow Started (2008-05-16 16:05:27 -0500)
    Starting action: Define Image Source
    Finished running action: Define Image Source
    Starting action: Add User Account
    Finished running action: Add User Account
    Starting action: Create Image
    Starting image creation process...
    Create NetBoot Image
    created: /Users/[username]/Documents/NetBoot of Mac OS X Install DVD/NetBoot.dmg
    installer: Package name is Mac OS X
    installer: Installing at base path /tmp/mnt
    installer: The install was successful.
    updatedyld_sharedcache failed: universal_boot option can only be used on Intel machines
    hdiutil: couldn't eject "disk3" - error 49168
    "disk3" unmounted.
    Script is done.
    NetBoot creation failed.
    Image creation process finished...
    Stopping image creation.
    Image creation failed.

    Here's the contents of the Debug log; I couldn't find where the problem was, but maybe someone can help. (I'm also not sure how to keep the discussion board from translating some of the code to markup). Thanks!
    Starting image creation.
    Workflow Started (2008-05-19 16:42:42 -0500)
    Starting action: Define Image Source
    Finished running action: Define Image Source
    Starting action: Add User Account
    Finished running action: Add User Account
    Starting action: Create Image
    Starting image creation process...
    Create NetBoot Image
    progressPrefix="_progress"
    ++ progressPrefix=_progress
    scriptsDebugKey="DEBUG"
    ++ scriptsDebugKey=DEBUG
    imageIsUDIFKey="1"
    ++ imageIsUDIFKey=1
    mountPoint="/tmp/mnt"
    ++ mountPoint=/tmp/mnt
    ownershipInfoKey="1000:20"
    ++ ownershipInfoKey=1000:20
    dmgTarget="NetBoot"
    ++ dmgTarget=NetBoot
    sourceVol="/Volumes/Mac OS X Install DVD"
    ++ sourceVol='/Volumes/Mac OS X Install DVD'
    export CM_BUILD="CM_BUILD"
    ++ export CM_BUILD=CM_BUILD
    ++ CM_BUILD=CM_BUILD
    userLanguage[0]="English"
    ++ userLanguage[0]=English
    userIsAdmin[0]="1"
    ++ userIsAdmin[0]=1
    userImagePath[0]="/Library/User Pictures/Nature/Cactus.tif"
    ++ userImagePath[0]='/Library/User Pictures/Nature/Cactus.tif'
    export _com_apple_kextd_skiplocks="1"
    ++ export _com_apple_kextd_skiplocks=1
    ++ _com_apple_kextd_skiplocks=1
    userPassHash[0]="000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000006A29520ED4FE4E8C7DE0930018E9284B1078E0BB4CF77F870000000 000000000000
    00000000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 000000000000000000000000000000000000000000000"
    ++ userPassHash[0
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
    00000000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 0000000000000000000000000000000000000000000000000000000000
    userFullName[0]="[user full name]"
    ++ userFullName[0]='[user full name]'
    destPath="/Users/[user short name]/Documents/NetBoot of Mac OS X Install DVD"
    ++ destPath='/Users/[user short name]/Documents/NetBoot of Mac OS X Install DVD'
    userUnixName[0]="[user short name]"
    ++ userUnixName[0]=[user short name]
    . "$1/createCommon.sh"
    + . /tmp/niutemp.mdOQAzsJ/createCommon.sh
    # createCommon.sh
    # Common functionality for the Image creation process.
    # sourced in by the various SIU scripts
    # Copyright 2007 Apple Inc. All rights reserved.
    # Using dscl, create a user account
    AddLocalUser()
    # $1 long name
    # $2 short name
    # $3 isAdminUser key
    # $4 password hash
    # $5 user picture path
    # $6 Language string
    local databasePath="/Local/Target/Users/${2}"
    # Find a free UID between 501 and 599
    for ((i=501; i<600; i++)); do
    output=`/usr/bi
    n/dscl -f "${mountPoint}/var/db/dslocal/nodes/Default" localonly -search /Local/Target/Users UniqueID $i`
    # If there is already an account dscl returns it, so we're looking for an empty return value.
    if [ "$output" == "" ]; then
    break
    fi
    done
    # Create the user record
    /usr/bin/dscl -f "${mountPoint}/var/db/dslocal/nodes/Default" localonly -create $databasePath || exit 1
    # Add long name
    /usr/bin/dscl -f "${mountPoint}/var/db/dslocal/nodes/Default" localonly -append $databasePath RealName "${1}" || exit 1
    # Add PrimaryGroupID
    if [ "${3}" == 1 ]; then
    /usr/bin/dscl -f "${mountPoint}/var/db/dslocal/nodes/Default" localonly -append $databasePath PrimaryGroupID 80 || exit 1
    else
    /usr/bin/dscl -f "${mountPoint}/var/db/dslocal/nodes/Default" localonly -append $databasePath PrimaryGroupID 20 || exit 1
    fi
    # Add UniqueID
    /usr/bin/dscl -f "${mountPoint}/var/db/dslocal/nodes/Default" localonly -append $databasePath UniqueID ${i} || exit 1
    # Add Home Directory entry
    /usr/bin/dscl -f "${mountP
    oint}/var/db/dslocal/nodes/Default" localonly -append $databasePath dsAttrTypeNative:home /Users/${2} || exit 1
    /usr/bin/dscl -f "${mountPoint}/var/db/dslocal/nodes/Default" localonly -append $databasePath authentication_authority ";ShadowHash;" || exit 1
    /usr/bin/dscl -f "${mountPoint}/var/db/dslocal/nodes/Default" localonly -append $databasePath picture "${5}" || exit 1
    /usr/bin/dscl -f "${mountPoint}/var/db/dslocal/nodes/Default" localonly -append $databasePath passwd "*" || exit 1
    # Add shell
    /usr/bin/dscl -f "${mountPoint}/var/db/dslocal/nodes/Default" localonly -append $databasePath UserShell "/bin/bash" || exit 1
    # lookup generated uid
    genUID=`/usr/bin/dscl -f "${mountPoint}/var/db/dslocal/nodes/Default" localonly -read /Local/Target/Users/${2} GeneratedUID` || exit 1
    genUID=${genUID:14:36}
    # make sure the shadow/hash directory exists
    if [ ! -e "${mountPoint}/var/db/shadow/hash" ] ; then
    /bin/mkdir -p "${mountPoint}/var/db/shadow/hash" || exit 1
    /bin/chmod -R 700 "${mountPoint}/var/
    db/shadow" || exit 1
    fi
    # to copy our password hash in there...
    echo "${4}" > "${mountPoint}/var/db/shadow/hash/$genUID"
    /bin/chmod 600 "${mountPoint}/var/db/shadow/hash/$genUID" || exit 1
    # Create Home directory
    if [ -e "/System/Library/User Template/${6}.lproj/" ]; then
    /usr/bin/ditto "/System/Library/User Template/${6}.lproj/" "${mountPoint}/Users/${2}" || exit 1
    else
    /usr/bin/ditto "/System/Library/User Template/English.lproj/" "${mountPoint}/Users/${2}" || exit 1
    fi
    /usr/sbin/chown -R $i:$i "${mountPoint}/Users/${2}" || exit 1
    # If they exist, apply any Append.bom changes
    ApplyAppendBom()
    local tempDir="$1"
    local srcVol="$2"
    local opt=""
    if [ "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    if [ -e "$tempDir/Append.bom" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Applying Append.bom additions from System Image Utility"
    fi
    /usr/bin/ditto $opt -bom "$tempDir/Append.bom" "$srcVol" "${mountPoint}" || exit
    1
    fi
    if [ -e "$srcVol/Library/Application Support/Apple/System Image Utility/Append.bom" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Applying Append.bom additions from $srcVol"
    fi
    /usr/bin/ditto $opt -bom "$srcVol/Library/Application Support/Apple/System Image Utility/Append.bom" "$srcVol" "${mountPoint}" || exit 1
    fi
    # Copies a list of packages (full paths contained in the file at $1) from source to .../System/Installation/Packages/
    CopyPackagesFromFile()
    local theFile="$1"
    local opt=""
    if [ "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    while read FILE
    do
    if [ -e "${FILE}" ]; then
    local leafName=`basename "${FILE}"`
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Copying ${FILE}."
    fi
    /usr/bin/ditto $opt "${FILE}" "${mountPoint}/System/Installation/Packages/${leafName}" || exit 1
    fi
    done < "
    local opt=""
    if [ "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    while read FILE
    do
    if [ -e "${FILE}" ]; then
    local leafName=`basename "${FILE}"`
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Copying ${FILE}."
    fi
    read SUB_PATH
    /usr/bin/ditto $opt "${FILE}" "${mountPoint}/System/Installation/Packages/${SUB_PATH}${leafName}" || exit 1
    fi
    done < "${theFile}"
    # Create the dyld shared cache files
    CreateDyldCaches()
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Creating dyld shared cache files"
    if [ "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-debug"
    fi
    fi
    /usr/bin/update_dyld_shared_cache -root "${mountPoint}" -universal_boot -force $opt
    # Validate or create the destination directory and mo
    unt point
    CreateOrValidateDestination()
    local destDir="$1"
    if [ ! -d "$destDir" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Creating working path at $destDir"
    fi
    /bin/mkdir -p "$destDir" || exit 1
    fi
    # Create mount point
    if [ ! -d "${mountPoint}" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Creating mountpoint for in $destDir"
    fi
    /bin/mkdir -p "${mountPoint}" || exit 1
    fi
    # If any exist, apply any user accounts
    CreateUserAccounts()
    local count="${#userFullName[*]}"
    if [ $count -gt 0 ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Adding $count user account(s) to the image"
    fi
    for ((index=0; index<$count; index++)); do
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Adding user ${userFullName[$index]}"
    fi
    #lay down user here
    AddLocalUser "${userFullN
    ame[$index]}" "${userUnixName[$index]}" "${userIsAdmin[$index]}" "${userPassHash[$index]}" "${userImagePath[$index]}" "${userLanguage[$index]}"
    done
    fi
    # Create an installer package in /System/Installation/Packages/ wrapping the supplied script
    InstallerPackageFromScript()
    local tempDir="$1"
    local scriptPath="$2"
    local scriptName=`basename "${scriptPath}"`
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Create installer for script $scriptName"
    if [ "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    fi
    # shouldn't exist on entry...
    if [ -e "${tempDir}/emptyDir" ]; then
    /bin/rm -rf "${tempDir}/emptyDir"
    fi
    # make some directories to work in
    /bin/mkdir $opt -p "${tempDir}/$scriptName.pkg/Contents/Resources"
    /bin/mkdir $opt "${tempDir}/emptyDir" || exit 1
    cd "${tempDir}/emptyDir"
    # Create Archive.pax.gz
    /bin/pax -w -x cpio -f "$tempDir/$scriptName.pkg/Contents/Archive.pax" .
    /usr/bin/gzip "$tempDir/$scriptName.pkg
    /Contents/Archive.pax"
    # Create the Archive.bom file
    /usr/bin/mkbom "$tempDir/emptyDir/" "$tempDir/$scriptName.pkg/Contents/Archive.bom"
    # Create the Info.plist
    /bin/cat > "$tempDir/$scriptName.pkg/Contents/Info.plist" << END
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>CFBundleIdentifier</key>
    <string>com.apple.server.SystemImageUtility.$scriptName</string>
    <key>CFBundleShortVersionString</key>
    <string>1</string>
    <key>IFMajorVersion</key>
    <integer>1</integer>
    <key>IFMinorVersion</key>
    <integer>0</integer>
    <key>IFPkgFlagDefaultLocation</key>
    <string>/tmp</string>
    <key>IFPkgFlagInstallFat</key>
    <false/>
    <key>IFPkgFlagIsRequired</key>
    <false/>
    <key>IFPkgFormatVersion</key>
    <real>0.10000000149011612</real>
    </dict>
    </plist>
    END
    echo "pkmkrpkg1" > "$tempDir/$scriptName.pkg/Contents/PkgInfo"
    echo "major: 1\nminor: 0" > "$tempDir/$scriptName
    .pkg/Contents/Resources/package_version"
    # Copy the script
    /bin/cp "$scriptPath" "$tempDir/$scriptName.pkg/Contents/Resources/postflight"
    # copy the package to the Packages directory
    /usr/bin/ditto $opt "$tempDir/$scriptName.pkg" "${mountPoint}/System/Installation/Packages/$scriptName.pkg" || exit 1
    # clean up
    /bin/rm -r "$tempDir/emptyDir"
    /bin/rm -r "$tempDir/$scriptName.pkg"
    # If restoreDSBindings.sh exists, tar up the DS data and install it all onto the install image
    InstallLocalDSBindings()
    local tempDir="$1"
    local niuTempDir="var/tmp/niu"
    local scriptDir=${niuTempDir}/postinstall
    local opt=""
    if [ -e "$tempDir/restoreDSBindings.sh" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Directory Service bindings from this computer"
    if [ "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    fi
    # make the directory if needed
    /bin/mkdir -p $opt "${mountPoint}/${scriptDir}" || exit 1
    # tar up the Directory
    Service settings
    /usr/bin/tar $opt -cf "${mountPoint}/${niuTempDir}/DSBindings.tar" /Library/Preferences/DirectoryService/ || exit 1
    /usr/bin/ditto $opt "$tempDir/restoreDSBindings.sh" "${mountPoint}/${scriptDir}/restoreDSBindings.sh" || exit 1
    # Set the permissions just in case
    /usr/sbin/chown root:wheel "${mountPoint}/${scriptDir}/restoreDSBindings.sh"
    /bin/chmod 755 "${mountPoint}/${scriptDir}/restoreDSBindings.sh"
    # make an installer package out of the script
    InstallerPackageFromScript "$tempDir" "$tempDir/restoreDSBindings.sh"
    fi
    # If it exists, install the PowerManagement.plist onto the install image
    InstallPowerManagementPlist()
    local tempDir="$1"
    local opt=""
    if [ -e "$tempDir/com.apple.PowerManagement.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing progress announcer to install image"
    if [ "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    fi
    /usr/bin/ditto $opt "$tempDir/com.app
    le.PowerManagement.plist" "${mountPoint}/Library/Preferences/SystemConfiguration/com.apple.PowerManagemen t.plist" || exit 1
    /usr/sbin/chown root:wheel "${mountPoint}/Library/Preferences/SystemConfiguration/com.apple.PowerManagemen t.plist"
    /bin/chmod 644 "${mountPoint}/Library/Preferences/SystemConfiguration/com.apple.PowerManagemen t.plist"
    fi
    # If it exists, install the InstallerStatusNotifications.bundle and progress emitter onto the install image
    InstallProgressPieces()
    local tempDir="$1"
    local opt=""
    if [ -e "$tempDir/InstallerStatusNotifications.bundle" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing progress announcer to install image"
    if [ "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    fi
    /usr/bin/ditto $opt "$tempDir/InstallerStatusNotifications.bundle" "${mountPoint}/System/Library/CoreServices/InstallerStatusNotifications.bundle" || exit 1
    /usr/sbin/chown -R root:wheel "${mountPoint}/System/Lib
    rary/CoreServices/InstallerStatusNotifications.bundle"
    /bin/chmod 755 "${mountPoint}/System/Library/CoreServices/InstallerStatusNotifications.bundle"
    fi
    if [ -e "$tempDir/com.apple.ProgressEmitter.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing status emitter to image"
    fi
    /usr/bin/ditto $opt "$tempDir/progress_emitter" "${mountPoint}/usr/sbin/progress_emitter" || exit 1
    /usr/sbin/chown root:wheel "${mountPoint}/usr/sbin/progress_emitter"
    /bin/chmod 555 "${mountPoint}/usr/sbin/progress_emitter"
    /usr/bin/ditto $opt "$tempDir/com.apple.ProgressEmitter.plist" "${mountPoint}/System/Library/LaunchDaemons/com.apple.ProgressEmitter.plist" || exit 1
    /usr/sbin/chown root:wheel "${mountPoint}/System/Library/LaunchDaemons/com.apple.ProgressEmitter.plist"
    /bin/chmod 644 "${mountPoint}/System/Library/LaunchDaemons/com.apple.ProgressEmitter.plist"
    fi
    # Converts a list of scripts (full paths contained in the file at $1) into pa
    ckages in .../System/Installation/Packages/
    InstallScriptsFromFile()
    local tempDir="$1"
    local theFile="$2"
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Converting scripts into install packages"
    fi
    while read FILE
    do
    if [ -e "${FILE}" ]; then
    # make an installer package out of the script
    InstallerPackageFromScript "$tempDir" "${FILE}"
    fi
    done < "
    local destDir="$2"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Performing post install cleanup"
    if [ "${scriptsDebugKey}" == "DEBUG" ] ; then
    opt="-v"
    fi
    fi
    # delete the DS indices to force reindexing...
    if [ -e "${mountPoint}/var/db/dslocal/indices/Default/index" ]; then
    /bin/rm $opt "${mountPoint}/var/db/dslocal/indices/Default/index"
    fi
    if [ "${scriptsDebugKey}" == "VERBO
    SE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Detaching disk image"
    fi
    /usr/bin/hdiutil detach "${mountPoint}" || exit 1
    # remove the mount folder
    /bin/rmdir "${mountPoint}" || exit 1
    # copy the NBImageInfo.plist file
    /usr/bin/ditto $opt "$tempDir/NBImageInfo.plist" "$destDir/NBImageInfo.plist" || exit 1
    echo "Correcting permissions. ${ownershipInfoKey} $destDir"
    /usr/sbin/chown -R "${ownershipInfoKey}" "$destDir"
    # rename the folder to .nbi
    if [ ! -e "$destDir.nbi" ]; then
    /bin/mv $opt "$destDir" "$destDir.nbi" || exit 1
    else
    local parentDir=`dirname "${destDir}"`
    local targetName=`basename "${destDir}"`
    for ((i=2; i<1000; i++)); do
    if [ ! -e "${parentDir}/${targetName}_$i.nbi" ]; then
    /bin/mv $opt "$destDir" "${parentDir}/${targetName}_$i.nbi" || exit 1
    break
    fi
    done
    fi
    # Prepare the source by deleting stuff we don't want to copy if sourcing a volume
    PreCleanSource()
    local srcVol="$1"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${
    scriptsDebugKey}" == "DEBUG" ]; then
    if [ "${scriptsDebugKey}" == "DEBUG" ] ; then
    opt="-v"
    fi
    fi
    if [ -e "$srcVol/private/var/vm/swapfile*" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Removing swapfiles on $1"
    fi
    /bin/rm $opt "$srcVol/private/var/vm/swapfile*"
    fi
    if [ -d "$srcVol/private/tmp" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out /private/tmp on $1"
    fi
    /bin/rm -r $opt "$srcVol/private/tmp/*"
    fi
    if [ -d "$srcVol/private/var/tmp" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out /private/var/tmp on $1"
    fi
    /bin/rm -r $opt "$srcVol/private/var/tmp/*"
    fi
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out devices and volumes on $1"
    fi
    if [ -d "$srcVol/Volumes" ]; then
    /bin/rm -r $opt "$srcVol/Volumes/*"
    fi
    if [ -d "$srcVol/dev" ]; t
    hen
    /bin/rm $opt "$srcVol/dev/*"
    fi
    if [ -d "$srcVol/private/var/run" ]; then
    /bin/rm -r $opt "$srcVol/private/var/run/*"
    fi
    # Copy kernel and build the kext cache on the boot image
    PrepareKernelAndKextCache()
    local destDir="$1"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Preparing the kernel and kext cache for the boot image"
    if [ "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    fi
    for ARCH in i386 ppc; do
    # Prepare the kernel
    /bin/mkdir $opt "$destDir/${ARCH}" || exit 1
    /usr/bin/lipo -extract "${ARCH}" "${mountPoint}/mach_kernel" -output "$destDir/${ARCH}/mach.macosx" || exit 1
    # Build kext cache
    /usr/sbin/kextcache -a ${ARCH} -s -l -n -z -m "$destDir/${ARCH}/mach.macosx.mkext" "${mountPoint}/System/Library/Extensions" || exit 1
    done
    # Create the PPC and I386 boot loaders on the boot image
    PrepareBootLoader()
    local srcVol="$1"
    local destDir="$2"
    local opt=""
    if [ "${scriptsDebugKey}
    " == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Preparing boot loader"
    if [ "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    fi
    if [ -e "${mountPoint}/usr/standalone/ppc/bootx.bootinfo" ]; then
    /usr/bin/ditto $opt "${mountPoint}/usr/standalone/ppc/bootx.bootinfo" "$destDir/ppc/booter" || exit 1
    /usr/bin/ditto $opt "${mountPoint}/usr/standalone/i386/boot.efi" "$destDir/i386/booter" || exit 1
    else
    /usr/bin/ditto $opt "$srcVol/usr/standalone/ppc/bootx.bootinfo" "$destDir/ppc/booter" || exit 1
    /usr/bin/ditto $opt "$srcVol/usr/standalone/i386/boot.efi" "$destDir/i386/booter" || exit 1
    fi
    # If it exists, install the partitioning application and data onto the install image
    ProcessAutoPartition()
    local tempDir="$1"
    local opt=""
    if [ -e "$tempDir/PartitionInfo.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Partitioning application and data to install image"
    if [ "${scriptsDebugKey}" ==
    "DEBUG" ]; then
    opt="-v"
    fi
    fi
    /usr/bin/ditto $opt "$tempDir/PartitionInfo.plist" "${mountPoint}/System/Installation/PartitionInfo.plist" || exit 1
    /usr/bin/ditto $opt "$tempDir/AutoPartition.app" "${mountPoint}/System/Installation/AutoPartition.app" || exit 1
    # Tell the installer to run the Partitioning application
    /bin/echo "#!/bin/sh
    /System/Installation/AutoPartition.app/Contents/MacOS/AutoPartition" > "${mountPoint}/private/etc/rc.cdrom.postWS"
    # Due to the way rc.install sources the script, it needs to be executable
    /usr/sbin/chown root:wheel "${mountPoint}/private/etc/rc.cdrom.postWS"
    /bin/chmod 755 "${mountPoint}/private/etc/rc.cdrom.postWS"
    fi
    # If it exists, install the minstallconfig.xml onto the install image
    ProcessMinInstall()
    local tempDir="$1"
    local opt=""
    if [ -e "$tempDir/minstallconfig.xml" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing minstallconfig.xml to install image"
    if
    [ "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    fi
    /usr/bin/ditto $opt "$tempDir/minstallconfig.xml" "${mountPoint}/etc/minstallconfig.xml" || exit 1
    /usr/sbin/chown root:wheel "${mountPoint}/etc/minstallconfig.xml"
    /bin/chmod 644 "${mountPoint}/etc/minstallconfig.xml"
    fi
    # untar the OSInstall.mpkg so it can be modified
    untarOSInstallMpkg()
    local tempDir="$1"
    local opt=""
    # we might have already done this, so check for it first
    if [ ! -d "${tempDir}/OSInstall_pkg" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "uncompressing OSInstall.mpkg"
    if [ "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    fi
    /bin/mkdir "${tempDir}/OSInstall_pkg"
    cd "${tempDir}/OSInstall_pkg"
    /usr/bin/xar $opt -xf "${mountPoint}/System/Installation/Packages/OSInstall.mpkg"
    # make Distribution writeable
    /bin/chmod 777 "${tempDir}/OSInstall_pkg"
    /bin/chmod 666 "${tempDir}/OSInstall_pkg/Distribution"
    fi
    handler (
    echo "Terminated. Cleaning up. Unmounting $destPath"
    /usr/bin/hdiutil detach "${mountPoint}"
    /bin/rmdir "${mountPoint}"
    /bin/rm -r "$destPath"
    exit
    trap "handler" TERM INT
    + trap handler TERM INT
    # Set up for script debugging
    debug_opt=""
    + debug_opt=
    if [ "${scriptsDebugKey}" == "DEBUG" ]; then
    debug_opt="-v"
    fi
    + '[' DEBUG == DEBUG ']'
    + debug_opt=-v
    # Prepare the destination
    CreateOrValidateDestination "$destPath"
    + CreateOrValidateDestination '/Users/[user short name]/Documents/NetBoot of Mac OS X Install DVD'
    + local 'destDir=/Users/[user short name]/Documents/NetBoot of Mac OS X Install DVD'
    + '[' '!' -d '/Users/[user short name]/Documents/NetBoot of Mac OS X Install DVD' ']'
    + '[' DEBUG == VERBOSE -o DEBUG == DEBUG ']'
    + echo 'Creating working path at /Users/[user short name]/Documents/NetBoot of Mac OS X Install DVD'
    Creating working path at /Users/[user short name]/Documents/NetBoot of Mac OS X Install DVD
    + /bin/mkdir -p '/Users/[user short name]/Documents/NetBoot of Mac OS X Install DVD'
    + '[' '!' -d /tmp/mnt ']'
    # update progress i
    nformation
    echo "${progressPrefix}_creatingImage_"
    + echo
    # Create the appropriate disk image type
    imageExtension="sparseimage"
    + imageExtension=sparseimage
    if [ "${imageIsUDIFKey}" == 1 ]; then
    tempsize=""
    # if installing from DVD, get the max install size, otherwise use the volume size
    if [ -e "${sourceVol}/System/Installation/Packages/OSInstall.mpkg" ]; then
    /usr/sbin/installer -plist -verbose -pkginfo -pkg "${sourceVol}/System/Installation/Packages/OSInstall.mpkg" > "$1/OSInstall.plist"
    tempsize=`/usr/bin/defaults read "$1/OSInstall" Size`
    tempsize=$((tempsize/1024))
    else
    tempsize=`df -m "$sourceVol" | tail -n 1 | awk '{print $3}'`
    fi
    # Add one percent for safety, 500MB for the dyld caches and 400MB to eliminate the "disk is almost full" message
    size=$(($tempsize+$(($tempsize/100))+900))
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Creating disk image (Size: $size MB)"
    fi
    # Create and atta
    ch disk image
    /usr/bin/hdiutil create "$destPath/$dmgTarget" -megabytes $size -volname "$dmgTarget" -uid 0 -gid 80 -mode 1775 -layout "UNIVERSAL CD" -fs HFS+ -stretch 500g -ov || exit 1
    imageExtension="dmg"
    else
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Creating sparse disk image"
    fi
    /usr/bin/hdiutil create "$destPath/$dmgTarget" -type SPARSE -size 500g -volname "$dmgTarget" -uid 0 -gid 80 -mode 1775 -layout "UNIVERSAL CD" -fs HFS+ -ov || exit 1
    fi
    + '[' 1 == 1 ']'
    + tempsize=
    + '[' -e '/Volumes/Mac OS X Install DVD/System/Installation/Packages/OSInstall.mpkg' ']'
    + /usr/sbin/installer -plist -verbose -pkginfo -pkg '/Volumes/Mac OS X Install DVD/System/Installation/Packages/OSInstall.mpkg'
    /usr/bin/defaults read "$1/OSInstall" Size
    ++ /usr/bin/defaults read /tmp/niutemp.mdOQAzsJ/OSInstall Size
    + tempsize=11937692
    + tempsize=11657
    + size=12673
    + '[' DEBUG == VERBOSE -o DEBUG == DEBUG ']'
    + echo 'Creating disk image (Size: 12673 MB)'
    Creating disk image (Size: 12673 MB)
    + /usr/bin/hdiutil create '/Users/[user short name]/Documents/NetBoot of Mac OS X Install DVD/NetBoot' -megabytes 12673 -volname NetBoot -uid 0 -gid 80 -mode 1775 -layout 'UNIVERSAL CD' -fs HFS+ -stretch 500g -ov
    created: /Users/[user short name]/Documents/NetBoot of Mac OS X Install DVD/NetBoot.dmg
    + imageExtension=dmg
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Attaching disk image"
    fi
    + '[' DEBUG == VERBOSE -o DEBUG == DEBUG ']'
    + echo 'Attaching disk image'
    Attaching disk image
    /usr/bin/hdiutil attach "$destPath/$dmgTarget.$imageExtension" -owners on -nobrowse -mountpoint "${mountPoint}" -quiet || exit 1
    + /usr/bin/hdiutil attach '/Users/[user short name]/Documents/NetBoot of Mac OS X Install DVD/NetBoot.dmg' -owners on -nobrowse -mountpoint /tmp/mnt -quiet
    # Copy source Volume base system to
    if [ -e "${sourceVol}/System/Installation/Packages/OSInstall.mpkg" ]; then
    # update progress information
    echo "${progressPrefix}_installingSystem_"
    if [ -e "$1/MacOSXInstaller.choiceChanges" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing to destination volume with choice selection."
    fi
    /usr/sbin/installer -applyChoiceChangesXML "$1/MacOSXInstaller.choiceChanges" -pkg "${sourceVol}/System/Installation/Packages/OSInstall.mpkg" -target "${mountPoint}"
    else
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing to destination volume"
    fi
    /usr/sbin/installer -pkg "${sourceVol}/System/Installation/Packages/OSInstall.mpkg" -target "${mountPoint}"
    fi
    # bless the boot folder
    /usr/sbin/bless -folder "${mountPoint}/System/Library/CoreServices" -quiet --bootinfo --bootefi
    # "kext"
    if [ -e "${mountPoint}/System/Library/StartupItems/NetBootSharingNames"
    ]; then
    /bin/chmod 0755 "${mountPoint}/System/Library/StartupItems"
    /usr/sbin/chown -R root:wheel "${mountPoint}/System/Library/StartupItems/NetBootSharingNames"
    /bin/chmod 0755 "${mountPoint}/System/Library/StartupItems/NetBootSharingNames"
    /bin/chmod 0755 "${mountPoint}/System/Library/StartupItems/NetBootSharingNames/NetBootSharingNa mes"
    /bin/chmod 0644 "${mountPoint}/System/Library/StartupItems/NetBootSharingNames/StartupParameter s.plist"
    fi
    if [ ! -d "${mountPoint}/Library/Preferences/DirectoryService" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Creating DirectoryService directory"
    fi
    /bin/mkdir $debug_opt "${mountPoint}/Library/Preferences/DirectoryService"
    /bin/chmod 0775 "${mountPoint}/Library/Preferences/DirectoryService"
    fi
    /usr/sbin/kextcache -a i386 -a ppc -l -z -m "${mountPoint}/System/Library/Extensions.mkext" "${mountPoint}/System/Library/Extensions" || exit 1
    else
    # update progress information
    echo "${progressPre
    fix}_copyingSource_"
    PreCleanSource "$sourceVol"
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Copying source volume"
    fi
    /usr/bin/ditto $debug_opt "$sourceVol" "${mountPoint}"
    fi
    + '[' -e '/Volumes/Mac OS X Install DVD/System/Installation/Packages/OSInstall.mpkg' ']'
    + echo
    + '[' -e /tmp/niutemp.mdOQAzsJ/MacOSXInstaller.choiceChanges ']'
    + '[' DEBUG == VERBOSE -o DEBUG == DEBUG ']'
    + echo 'Installing to destination volume'
    Installing to destination volume
    + /usr/sbin/installer -pkg '/Volumes/Mac OS X Install DVD/System/Installation/Packages/OSInstall.mpkg' -target /tmp/mnt
    installer: Package name is Mac OS X
    installer: Installing at base path /tmp/mnt
    installer: The install was successful.
    + /usr/sbin/bless -folder /tmp/mnt/System/Library/CoreServices -quiet --bootinfo --bootefi
    + '[' -e /tmp/mnt/System/Library/StartupItems/NetBootSharingNames ']'
    + '[' '!' -d /tmp/mnt/Library/Preferences/DirectoryService ']'
    + /usr/sbin/kextcache -a i386 -a ppc -l -z -m /tmp/mnt/System/Library/Extensions.mkext /tmp/mnt/System/Library/Extensions
    # install the PowerManagement.plist onto the bootable image
    InstallPowerManagementPlist "$1"
    + InstallPowerManagementPlist /tmp/niutemp.mdOQAzsJ
    + local tempDir=/tmp/niutemp.mdOQAzsJ
    + local opt=
    + '[' -e /tmp/niutemp.mdOQAzsJ/com.apple.PowerManagement.plist ']'
    + '[' DEBUG == VERBOSE -o DEBUG == DEBUG ']'
    + echo 'Installing progress announcer to install image'
    Installing progress announcer to install image
    + '[' DEBUG == DEBUG ']'
    + opt=-v
    + /usr/bin/ditto -v /tmp/niutemp.mdOQAzsJ/com.apple.PowerManagement.plist /tmp/mnt/Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plis t
    Copying /tmp/niutemp.mdOQAzsJ/com.apple.PowerManagement.plist
    + /usr/sbin/chown root:wheel /tmp/mnt/Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plis t
    + /bin/chmod 644 /tmp/mnt/Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plis t
    # create the dyld caches
    CreateDyldCaches
    + CreateDyldCaches
    + local opt=
    + '[' DEBUG == VERBOSE -o DEBUG == DEBUG ']'
    + echo 'Creating dyld shared cache files'
    Creating dyld shared cache files
    + '[' DEBUG == DEBUG ']'
    + opt=-debug
    + /usr/bin/update_dyld_shared_cache -root /tmp/mnt -universal_boot -force -debug
    update_dyld_shared_cache failed: universal_boot option can only be used on Intel machines
    # If it exists, install the partition data onto the bootable image
    ProcessAutoPartition "$1"
    + ProcessAutoPartition /tmp/niutemp.mdOQAzsJ
    + local tempDir=/tmp/niutemp.mdOQAzsJ
    + local opt=
    + '[' -e /tmp/niutemp.mdOQAzsJ/PartitionInfo.plist ']'
    # install the progress emitter onto the install image
    InstallProgressPieces "$1"
    + InstallProgressPieces /tmp/niutemp.mdOQAzsJ
    + local tempDir=/tmp/niutemp.mdOQAzsJ
    + local opt=
    + '[' -e /tmp/niutemp.mdOQAzsJ/InstallerStatusNotifications.bundle ']'
    + '[' -e /tmp/niutemp.mdOQAzsJ/com.apple.ProgressEmitter.plist ']'
    + '[' DEBUG == VERBOSE -o DEBUG == DEBUG ']'
    + echo 'Insta
    lling status emitter to image'
    Installing status emitter to image
    + /usr/bin/ditto /tmp/niutemp.mdOQAzsJ/progress_emitter /tmp/mnt/usr/sbin/progress_emitter
    + /usr/sbin/chown root:wheel /tmp/mnt/usr/sbin/progress_emitter
    + /bin/chmod 555 /tmp/mnt/usr/sbin/progress_emitter
    + /usr/bin/ditto /tmp/niutemp.mdOQAzsJ/com.apple.ProgressEmitter.plist /tmp/mnt/System/Library/LaunchDaemons/com.apple.ProgressEmitter.plist
    + /usr/sbin/chown root:wheel /tmp/mnt/System/Library/LaunchDaemons/com.apple.ProgressEmitter.plist
    + /bin/chmod 644 /tmp/mnt/System/Library/LaunchDaemons/com.apple.ProgressEmitter.plist
    # update progress information
    echo "${progressPrefix}_buildingBooter_"
    + echo
    # Copy kernel and build the kext cache on the boot image
    PrepareKernelAndKextCache "$destPath"
    + PrepareKernelAndKextCache '/Users/[user short name]/Documents/NetBoot of Mac OS X Install DVD'
    + local 'destDir=/Users/[user short name]/Documents/NetBoot of Mac OS X Install DVD'
    + local opt=
    + '[' DEBUG == VERBO
    SE -o DEBUG == DEBUG ']'
    + echo 'Preparing the kernel and kext cache for the boot image'
    Preparing the kernel and kext cache for the boot image
    + '[' DEBUG == DEBUG ']'
    + opt=-v
    + for ARCH in i386 ppc
    + /bin/mkdir -v '/Users/[user short name]/Documents/NetBoot of Mac OS X Install DVD/i386'
    mkdir: created directory '/Users/[user short name]/Documents/NetBoot of Mac OS X Install DVD/i386'
    + /usr/bin/lipo -extract i386 /tmp/mnt/mach_kernel -output '/Users/[user short name]/Documents/NetBoot of Mac OS X Install DVD/i386/mach.macosx'
    + /usr/sbin/kextcache -a i386 -s -l -n -z -m '/Users/[user short name]/Documents/NetBoot of Mac OS X Install DVD/i386/mach.macosx.mkext' /tmp/mnt/System/Library/Extensions
    + for ARCH in i386 ppc
    + /bin/mkdir -v '/Users/[user short name]/Documents/NetBoot of Mac OS X Install DVD/ppc'
    mkdir: created directory '/Users/[user short name]/Documents/NetBoot of Mac OS X Install DVD/ppc'
    + /usr/bin/lipo -extract ppc /tmp/mnt/mach_kernel -output '/Users/[user short name]/Documents/NetBoot of Mac OS X Install DVD/ppc/mach.macosx'
    + /usr/sbin/kextcache -a ppc -s -l -n -z -m '/Users/[user short name]/Documents/NetBoot of Mac OS X Install DVD/ppc/mach.macosx.mkext' /tmp/mnt/System/Library/Extensions
    # And finally, prepare the boot loader on the boot image
    PrepareBootLoader "$sourceVol" "$destPath"
    + PrepareBootLoader '/Volumes/Mac OS X Install DVD' '/Users/[user short name]/Documents/NetBoot of Mac OS X Install DVD'
    + local 'srcVol=/Volumes/Mac OS X Install DVD'
    + local 'destDir=/Users/[user short name]/Documents/NetBoot of Mac OS X Install DVD'
    + local opt=
    + '[' DEBUG == VERBOSE -o DEBUG == DEBUG ']'
    + echo 'Preparing boot loader'
    Preparing boot loader
    + '[' DEBUG == DEBUG ']'
    + opt=-v
    + '[' -e /tmp/mnt/usr/standalone/ppc/bootx.bootinfo ']'
    + /usr/bin/ditto -v /tmp/mnt/usr/standalone/ppc/bootx.bootinfo '/Users/[user short name]/Documents/NetBoot of Mac OS X Install DVD/ppc/booter'
    Copying /tmp/mnt/usr/standalone/ppc/bootx.bootinfo
    + /usr/bin/ditto -v /tmp/mnt/usr/standalone/i386/boot.efi '/Users/[user short name]/Documents/NetBoot of Mac OS X Install DVD/i386/booter'
    Copying /tmp/mnt/usr/standalone/i386/boot.efi
    # "touch"
    /usr/bin/touch "${mountPoint}/private/var/db/.AppleSetupDone"
    + /usr/bin/touch /tmp/mnt/private/var/db/.AppleSetupDone
    /usr/bin/touch "${mountPoint}/Library/Receipts/.SetupRegComplete"
    + /usr/bin/touch /tmp/mnt/Library/Receipts/.SetupRegComplete
    /usr/bin/touch "${mountPoint}/.metadata_never_index"
    + /usr/bin/touch /tmp/mnt/.metadata_never_index
    # remove software update
    if [ -e "${mountPoint}/System/Library/CoreServices/Software Update.app" ]; then
    /bin/rm -rf "${mountPoint}/System/Library/CoreServices/Software Update.app"
    fi
    + '[' -e '/tmp/mnt/System/Library/CoreServices/Software Update.app' ']'
    + /bin/rm -rf '/tmp/mnt/System/Library/CoreServices/Software Update.app'
    if [ -e "${mountPoint}/System/Library/PreferencePanes/SoftwareUpdate.prefPane" ]; then
    /bin/rm -rf "${mountPoint}/System/Library/PreferencePanes/SoftwareUpdate.prefPane"
    fi
    + '[' -e /tmp/mnt/System/Library/PreferencePanes/SoftwareUpdate.prefPane ']'
    + /bin/rm -rf /tmp/mnt/System/Library/PreferencePanes/SoftwareUpdate.prefPane
    # add any user accounts
    CreateUserAccounts
    + CreateUserAccounts
    + local count=1
    + '[' 1 -gt 0 ']'
    + '[' DEBUG == VERBOSE -o DEBUG == DEBUG ']'
    + echo 'Adding 1 user account(s) to the image'
    Adding 1 user account(s) to the image
    + (( index=0 ))
    + (( index<1 ))
    + '[' DEBUG == VERBOSE -o DEBUG == DEBUG ']'
    + echo 'Adding user [user full name]'
    Adding user [user full name]
    + AddLocalUser '[user full name]' [user short name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
    00000000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000 '/Library/User Pictures/Nature/Cactus.tif' English
    + local databasePath=/Local/Target/Users/[user short name]
    + (( i=501 ))
    + (( i<600 ))
    /usr/bin/dscl -f "${mountPoint}/var/db/dslocal/nodes/Default" localonly -search /Local/Target/Users UniqueID $i
    ++ /usr/bin/dscl -f /tmp/mnt/var/db/dslocal/nodes/Default localonly -search /Local/Target/Users UniqueID 501
    + output=
    + '[' '' == '' ']'
    + break
    + /usr/bin/dscl -f /tmp/mnt/var/db/dslocal/nodes/Default localonly -create /Local/Target/Users/[user short name]
    + /usr/bin/dscl -f /tmp/mnt/var/db/dslocal/nodes/Default localonly -append /Local/Target/Users/[user short name] RealName '[user full name]'
    + '[' 1 == 1 ']'
    + /usr/bin/dscl -f /tmp/mnt/var/db/dslocal/nodes/Default localonly -append /Local/Target/Users/[user short name] PrimaryGroupID 80
    + /usr/bin/dscl -f /tmp/mnt/var/db/dslocal/nodes/Default localonly -append /Local/Target/Users/[user short name] UniqueID 501
    + /usr/bin/dscl -f /tmp/mnt/var/db/dslocal/nodes/Default localonly -append /Local/Target/Users/[user short name] dsAttrTypeNative:home /Users/[user short name]
    + /usr/bin/dscl -f /tmp/mnt/var/db/dslocal/nodes/Default localonly -append /Local/Target/Users/[user short name] authentication_authority ';ShadowHash;'
    + /usr/bin/dscl -f /tmp/mnt/var/db/dslocal/nodes/Default localonly -append /Local/Target/Users/[user short name] picture '/Library/User Pictures/Nature/Cactus.tif'
    + /usr/bin/dscl -f /tmp/mnt/var/db/dslocal/nodes/Default localonly -append /Local/Target/Users/[user short name] passwd '*'
    + /usr/bin/dscl -f /tmp/mnt/var/db/dslocal/nodes/Default localonly -append /Local/Target/Users/[user short name] UserShell /bin/bash
    /usr/bin/dscl -f "${mountPoint}/var/db/dslocal/nodes/Default" localonly -read /Local/Target/Users/${2} GeneratedUID
    ++ /usr/bin/dscl -f /tmp/mnt/var/db/dslocal/nodes/Default localonly -read /Local/Target/Users/[user short name] GeneratedUID
    + genUID='GeneratedUID: 2609E2EC-9C33-469B-B850-A3BF935D72FE'
    + genUID=2609E2EC-9C33-469B-B850-A3BF935D72FE
    + '[' '!' -e /tmp/mnt/var/db/shadow/hash ']'
    + /bin/mkdir -p /tmp/mnt/var/db/shadow/hash
    + /bin/chmod -R 700 /tmp/mnt/var/db/shadow
    + echo 0000000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 0000000006A29520ED4FE4E8C7DE0930018E9284B1078E0BB4CF77F8700000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 0000000000000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 000000000000000000000000000000000000000000000000000000000000000
    + /bin/chmod 600 /tmp/mnt/var/db/shadow/hash/2609E2EC-9C33-469B-B850-A3BF935D72FE
    + '[' -e '/System/Library/User Template/English.lproj/' ']'
    + /usr/bin/ditto '/System/Library/User Template/English.lproj/' /tmp/mnt/Users/[user short name]
    + /usr/sbin/chown -R 501:501 /tmp/mnt/Users/[user short name]
    + (( index++ ))
    + (( index<1 ))
    # update progress information
    echo "${progressPrefix}_finishingUp_"
    + echo
    # perform the final cleanup
    PostFlightDestination "$1" "$destPath"
    + PostFlightDestination /tmp/niutemp.mdOQAzsJ '/Users/[user short name]/Documents/NetBoot of Mac OS X Install DVD'
    + local tempDir=/tmp/niutemp.mdOQAzsJ
    + local 'destDir=/Users/[user short name]/Documents/NetBoot of Mac OS X Install DVD'
    + local opt=
    + '[' DEBUG == VERBOSE -o DEBUG == DEBUG ']'
    + echo 'Performing post install cleanup'
    Performing post install cleanup
    + '[' DEBUG == DEBUG ']'
    + opt=-v
    + '[' -e /tmp/mnt/var/db/dslocal/indices/Default/index ']'
    + '[' DEBUG == VERBOSE -o DEBUG == DEBUG ']'
    + echo 'Detaching disk image'
    Detaching disk image
    + /usr/bin/hdiutil detach /tmp/mnt
    T?∞T?– A≈

Maybe you are looking for

  • Previously blocked client computers - now cannot install SCCM 2012 R2 client

    Hello, I have a Primary Site on SCCM 2012 R2. New installation of 2012 R2, not upgrade from SCCM 2007. My environment is pretty small for now, having added just few dept computers in the company. We are using SCCM for Endpoint Security antivirus depl

  • HT1338 Trouble Updating Software

    Every time we go to update our software (from OS X 10.6.5) an error message comes up at the end of the downloading process that says that the update may be corrupted and could not be saved. Has anyone else had this issue? What can we do to get our sy

  • Problem in understanding literals

    Hi Im learning Java for about a week now and I still dont know what literals are used for. But i have a suggestion: They are used if a method expects a certain simple variable type (e.g. float) and you want to give the number 10 to it. And now you ne

  • AIR 3.1.0.4880 InvokeEvent Defect

    Recently upgraded to the AIR 3.1 SDK and have run into a show stopping issue regarding InvokeEvent on mobile devices.  The application is dispatching a new InvokeEvent each and every time you change orientation on the device.  And it isn't clearing t

  • What determines the address iCal email reminders are sent from?

    *What determines the address iCal email reminders +are sent from+?* On our g4 iMac, running Tiger, my wife has multiple pop3 email accounts. 6 to be exact. She only has one address listed in her address book, and that is her own main primary address.