System internal MIC not working in Hp Pavillion dv1000(model: dv1662ea)

Hi, When i connect to internet, internal MIC not working when i go to the voice chatting . Please provide me a solution. My model # is HP Pavilion DV1000 Notebook PC Model: dv1662ea, O/S: WinXP SP2 
Thx. .
Vam

i experiencing the same problem.. how did you resolved it?

Similar Messages

  • X220 Internal Mic not working

    I had just get a new X220 in recent days.
    And I found the internal mic not working, I can not record any sound through Sound Record or Skype.
    I had tried all the following methods, but the mic still can not working. Anyone cound give me some suggestion ?
    1) update sound card driver to 8.32.23.2
    2) Fn+F6,  change between "only my voice" or "Multiple voice"
    4) UnInstall source card driver and use microsoft generic driver
    3) The method in http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T420-internal-mic-problem/td-p/435551/page/..., operate like :
       Start -> control Panel -> Sound
    Click on the "Recording" tab
    Click Internal Microphone to highlight it
    Click Properties
    Click the "Advanced" tab
    Uncheck "Enable audio enhancements"
    Finally, click the "Levels" tab and turn Microphone Boost to 0dB. (if you don't do this the noise will be even louder than before).
    Click apply.

    hey kitewind,
    welcome to the forums and since you have tested the microphone using microsoft generic drivers and i'm guessing it did not work; therefore the best action for you right now is to contact our tech support group via
    http://bit.ly/LNVsuppNum
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • Internal mic not working after updating to 10.10.1

    After updating to 10.10.1 (from 10.10) on my MacBook pro 2010 (15” screen) the internal mic is not working when using FaceTime (or Skype) and so the person on the other end of the video/audio call is unable to hear me. On my end there is a static/crackly sound during FaceTime (or Skype) connecting  since the update which I believe is related to the mic problem (no sound input on Mac during FaceTime/Skype).
    HELP!!!

    I had exactly this same issue and and this workaround from Paul on another thread (Internal Mic not working for phone calls in Yosemite ) solved it :
    Make sure FaceTime App is not running
    Open Terminal
    type sudo killall coreaudiod
    Press Return
    Enter your computer's admin PW

  • Internal Mic not Working, external mic quits arbitrarily, I'm at wit's end!!!!

    Hey kids!
    The Computer: Toshiba Satellite A355D-S69221
    The Program: 32 Bit Windows Vista
    The issue: Internal Mic not recognized, external mic quits midway through conversation, Realtek Digital output not plugged in.
    So being the smart guy I am, a few weeks back I decided to do the smart thing and delete all the speech recognition software off this thing. I don't need it, so wth.
    Now, my internal mic quit. I reinstalled the software, rolled back drivers, deleted drivers to rebuild the driver stack, did a BIOS update, did the GTA ViceCity cheatcode start (unplug everything hold power key 30 seconds, reboot, f2 to enter bios, f9 to update, f10 to save), and nothing. 
    I did notice that when I had the Realtek Digital Output set as standard, my mic jack was illuminated by a red LED, and the Realtek HD manager wouldn't pop up when I plug something in.
    The last irritating part is that I will talk to my wife via vo/ip, the external mic I am using will just quit mid conversation, and I have to reload a driver to get it to work again. I am at my wit's end with this thing, can anyone help? The last thing I am goign to do is another system restore from an earlier date than I used before. Does anyone have any other hints/clues/ideas?
    KFD

    Thanks Jeff. No this isn't some kind of emergency so no one really minds my tinkering until it does get back up.
    OK, I got it now. This is what my cyrus.conf looks like. It doesn't look like there's anything wrong with it...
    # standard standalone server implementation
    START {
    # do not delete this entry!
    recover cmd="ctl_cyrusdb -r"
    # this is only necessary if using idled for IMAP IDLE
    # idled cmd="idled"
    # UNIX sockets start with a slash and are put into /var/imap/socket
    SERVICES {
    # add or remove based on preferences
    imap cmd="imapd" listen="imap" prefork=0
    imaps cmd="imapd -s" listen="imaps" prefork=0
    pop3 cmd="pop3d" listen="pop3" prefork=0
    pop3s cmd="pop3d -s" listen="pop3s" prefork=0
    sieve cmd="timsieved" listen="sieve" prefork=0
    # at least one LMTP is required for delivery
    lmtp cmd="lmtpd" listen="lmtp" prefork=0
    lmtpunix cmd="lmtpd" listen="/var/imap/socket/lmtp" prefork=0
    # this is only necessary if using notifications
    # notify cmd="notifyd" listen="/var/imap/socket/notify" proto="udp" prefork=1
    EVENTS {
    # this is required
    checkpoint cmd="ctl_cyrusdb -c" period=30
    # this is only necessary if using duplicate delivery suppression
    delprune cmd="ctl_deliver -E 3" at=0400
    # this is only necessary if caching TLS sessions
    tlsprune cmd="tls_prune" at=0400
    LIMITS {
    imaplimit value=0
    But yet it insists with the message: relay=cyrus, delay=239180, status=deferred (temporary failure. Command output: couldn't connect to lmtpd: No such file or directory_ 421 4.3.0 deliver: couldn't connect to lmtpd_ )
    when I try to send a message through the server. Could this be a permissions thing? I've fixed the permissions a lot of times and nothing seems to get changed...
    Again, thanks for everyone's help. I'm sure this is something dumb that I'm just missing but since I'm not familiar enough with the system it's hard for me to figure out what that is!

  • Boot camp - internal mic not working

    I've spent hours reviewing various forums and have tried all suggestions I've found, to no avail. That said, I'll detail my steps here in the hope that someone can help, or that I can help someone else, or at least drive someone else nuts.
    This is a 20" iMac (early 2008) running Snow Leopard + Window 7 Professional w/ Boot Camp 3.1 drivers (you know, the ones that fully support Windows 7).
    By default (that is, without Boot Camp drivers installed), Windows recognizes a "High Definition Audio Device." Sound doesn't work, but the internal mic does work, as evidenced by the fact that speaking or tapping on the top of the computer results in movement of the green bars that appear in the Recording Devices dialogue.
    After installing the Boot Camp drivers (or any more recent version of the Realtek drivers, including 2.41 that became available today), the "High Definition Audio Device" becomes "Realtek High Definition Audio." Sound works (poorly compared to OS X, but **** at least something comes out), but the microphone does not. In the Recording Devices dialogue, speaking, tapping, yelling, and swearing doesn't register per the green bars.
    I've reviewed many a post, and have tried the following:
    1. Uninstalled the Realtek driver, leaving only the default Microsoft driver, reboot, updated to the Realtek driver by browsing to the files from Device Manager instead of running Setup, reboot. This installs the driver, doesn't install Realtek HD Audio Manager, sound = yes, mic = no. Crap.
    2. Uninstalled the Realtek driver, leaving only the default Microsoft driver, reboot, installed the Realtek driver by running Setup, reboot. Sound = yes, mic = no. Crap crap.
    3. Uninstalled the Realtek driver, leaving only the default Microsoft driver, reboot, installed the Realtek driver by running Setup as Administrator, reboot. Sound = yes, mic = no. Crap crappity crap.
    4. Uninstalled the Realtek driver, leaving only the default Microsoft driver, reboot, installed the Realtek driver by running Setup in Vista compatibility mode, reboot. Sound = yes, mic = no. Crap crappity crap crap.
    So I'm certain both the microphone and speaker hardware work. The Microsoft driver gets me mic but no sound, and the Realtek driver gets me sound but no mic.
    Any helpful thoughts and comments are MUCH appreciated, and for the love of God if you're going to jump in with "what are you doing running Windows 7 on a Mac anyways" please save it.
    Thanks!

    I'm having the exact same problem!!! When is apple going to fix the drivers???!!!

  • Internal mic not working on macbook pro

    Hello,
    A few days ago I was trying to use my macspeech dictate software on my new macbook pro for the first time, I had to plug in the mic it came with and it would not work. Now my internal mic will not work at all in any other programs. I made sure it was selected under system preferences but for some reason it does not pick up on any sounds. I have my computer all up to date with version 10.6.8. Does anyone know what the problem might be?
    Thank you

    I doubt that the update did it, My daughter Macbook has it too and it is a general update of Yosemite. But, if you can backup your files you could go to the restore partition and reinstall Yosemite. The reinstall only installs the operating system and usually does not alter any of the other files. But having a backup is always a good idea. You can start by holding down Option or Option R at startup to do the reinstall.I cannot tell you that this will fix the internal mic problem as it could be that it is defective.

  • Toshiba satellite a215-s4757 internal mic not working

    So up until a couple weeks ago, my internal mike on my computer was working fine. Then the other day when I tried to use skype it would not work. When I go into sound->recording devices it says that the "front mic" is not plugged in. When I click on it thought it says it is working properly. I tried to download and install the driver from toshiba and it said that it installed correctly but this did not fix my problem. I read here that some other people have been downloading a new BIOS and that that helped? would that be able to help my computer? i have windows vista home premium 32 bit i believe. any help would be appreciated

    Satellite A215-S4757 Specifications
    Satellite A215-S4757 Downloads
    Let's just try a proper system reset and see if this helps bring your mic back.  Power off your system, unplug everything including the AC, remove the battery, press and hold down the power on button for 30 seconds, replace battery and AC, power on, when you see the Toshiba logo press the 'F2' key to enter BIOS Setup, in setup press 'F9' to load setup defaults, press 'F10' to save and exit, boot into Windows, and test your mic again.
    Please let us know if this helps. Good luck.
    Mike

  • Macbook pro 10.6.8 internal mic not working

    Hi there,
    After I got back my mac book pro from repair. I realised my internal mic is not working? Any idea? Or can I fix this myself?
    I tried quicktime to record my voice. I dun hear my voice after I played it.
    Thanks.

    Hi,
    Did you solved this problem?
    I have the same situation here...
    Regards

  • Nb305-n440 internal mic not working

    I just got a new mini netbook and am trying to work with the internal mic.  I have gone through the set up steps to no avail.  It's a Realtek High Definition Audio on the ATAPI internal jack.  I have made changes to all the settings I could find but still the mic doesn't pick up my voice even when yelling close to the screen.  In the set up I can see the level move very slightly when tapping the screen near the mic opening.  I have turned off all sound effects in the enhancements tab.  The mic and mic boost are all the way up and its not on mute.
    I really like this netbook and want it to work to its fullest.  Any help would be greatly appreciated.
    Thanks
    Andy

    mini notebook NB305-N440BL (blue)
    Can't hurt to reinstall the driver, Andy.
       Realtek Audio Driver
    -Jerry

  • Internal Mic not working at all

    I have a Acer Aspire 7735Z running Windows Vista Home, latest version of Skype 6.21.0.104
    internal mic isn't working at all...ran the fix-it tool, windows update, went to acer website installed latest drivers and still nothing seems to work.
    Any suggestions or help would be greatly appreciated !

    Go the skype audio settings and verify that the correct mic is selected.

  • Why is my internal mic not working

    My internal mic is not working

    Hi,
    What is your machine and it OS ???
    Please try to enable Microphone in Recording devices as follows:
    1. Right click speaker icon (right hand corner)
    2. Select Microphone devices
    3. Right click Microphone
    4. Enable it
    5. Click Apply/Ok
    Regards
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Thinkpad e530 internal mic NOT WORKING

    I have a Thinkpad Edge e530c.After updating to windows 8.1 my internal microphone is not working.I checked the drivers and they are up to date.I checked in device manager and its saying 'This device is working properly.' Anyone Plzz plzz help me!!

    Your problem is you have the latest driver. If you have the driver from about 2 weeks ago, it broke the mike. You need to go into your "drivers" folder and reinstall the original driver. Then it will work again.

  • System internal speakers not working in HP Pavilion DV2700

    Hi,
    When i connect to LCD TV or some external devices, the audio works. But the internal Altec Lansing speaker does not work. Please provide me a solution. I tried updating the BIOS, Conexant Audio driver, etc. but no luck so far!
    My model # is HP Pavilion DV2700 Notebook PC
    O/S: Vista 32 bit
    Thx.

    i experiencing the same problem.. how did you resolved it?

  • Internal Mic Not Working

    Ok, so my internal mic works fine with programs to record voice, but when i go online, into a chat site and use my mic, my voice comes out slow and extremely low pitched. what may be causing this? why? and can i do anything about it?
    i am using a black MacBook with Mac OS X 10.5.5

    are there any settings that can be changed on these chat sites?

  • Re: Satellite C650D - internal mic not working

    Hello forum
    When i was trying to mute the internal mic, I accidently removed the mic and its driver completely a few days from now,
    and after reinstalling the driver i cannot get the mic to pick up sounds.
    I'm not even sure if the internal mic is visible in the "recording devices" tab, what I see is "Conexant CX20671 SmartAudio HD".
    Might be the internal one, might also just be the external mic i use sometimes.
    Help me please.

    Hi mate
    You can try to reinstall the Conexant sound driver again. Usually this should detect all sound devices and mic even if it was disabled previously!
    The necessary driver can be found on the Toshiba European driver page.
    Another tip:
    You should check the audio settings in Control Panel -> Sound -> recording tab
    Here you should see two entries: internal mic and external mix which should not be enabled/detected if the external mic was not connected.
    The internal mic should be set as default!

Maybe you are looking for

  • Does anyone know what is the proper way to render a rectangle transparent texture over the screen in OpenGL ES 2.0?

    Hello I'd like to convert my directx program to ios and I'm stuck right now on rendering textures. I messed around and enabled otho camera in open gl ES 2.0 and textures render but I can't get alpha to work. I used glDrawArrays specifying the colour

  • I can't insert my data into the table - help please

    Hello everyone, I have a trouble about JSP. I'm using Java2 SDK,JSP 1.2,Mysql and TOMCAT. I want to do this. A user has to enter the nicno,into the html form(EnterNicInter.jsp),to verify if it is already exist or not. If it is exist in the db, an err

  • Cant edit or delete Songs!

    I can't edit or delete songs. If i delete, nothing happens, At all. If i edit, its just grey. I have unticked my music folder for 'read-only' and then reopened iTunes and ran as administator, nothing. Please help. Vista.

  • Mini Bridge

    My system is XP I nstalled CS6 as an upgrade from CS4 Mini bridge will not open Mini bridge ststes looking for BRIDGE

  • Conditional branch

    Hi All! I have a sequence: TEST#1 TEST#2 TEST#3 TEST#4 TEST#5 MESSAGE GOTO (TEST#8) TEST#6 TEST#7 TEST#8 In MESSAGE in Preconditions I check if all tests(TEST#1- TEST#5) PASS. In Post Action: ON Pass – Goto step – TEST#6. So I expect if preconditions