System.IO.FileNotFoundException: The file /_catalogs/masterpage/custom.master does not exist

Hi,
I am facing with this problem. System.IO.FileNotFoundException: The file /_catalogs/masterpage/custom.master does not exist.
I have reviewed in central admin. And my custom.masted is active.
some idea?
Patricia

is that a custom solution you deployed ?
look at your site collection master page gallery and verify if you have the master page .
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
you see a reply being an answer to the question of the thread, click "Mark As Answer

Similar Messages

The file required for contribute compatibility does not exist on the server

Hi, when connecting to a server in Dreamweaver that is set up
for Contribute I keep getting this message when putting files:
quote:
The file required for contribute compatibility does not exist
on the server. Would you like to turn off Contribute compatibility?
I see the post from jonbradley below, but the solution
suggested doesn't help me:
Does anyone have any idea what this means and how to stop it
from displaying?
Thanks in anticipation...
Simon

Did you search the forum on compatibility?
http://www.adobe.com/cfusion/webforums/forum/searchresults.cfm?requesttimeout=500&cate gory=290&forumid=55&FTVAR_KEYWORD1FRM=compatibility&FTVAR_SEARCHWHATFRM=c& FTVAR_RESULTTYPE=topics&FTVAR_AUTHORFRM=&FTVAR_TABLECHOICEFRM=current&FTVAR_CA TEGORYIDFRM=290&Selection=false&FTVAR_DATESELFRM=Select&FTVAR_STARTDATEFRM=&am p;FTVAR_ENDDATEFRM=&cal_d1=0&cal_d2=0

The bp id for org unit does not exist

Dear expert,
after transport the org structure from dev to qty system , we found the bp id for org unit does not exist in qty system.
in ppoma_crm, we can see there is a bp id assigned to the org unit. however, when use tcode 'bp' to check the bp id, the system can not fould a valid id.
what can we do to solve the issue?
will there any impact if we keep no bp id for the org unit?

Hi,
You can use the transaction CRM_OM_BP_INTEGRATE.
Select the Org unit and enter the org id in the input field and execute it.
Select the org unit from the result list and click on the button Start Repair. This will create a BP without errors for the respective org unit.
Regards,
PP

When I click on the tab with a + on it, located next to the active tab a new page does not open. If I click on "New Tab" in the File menu a new tab does not ope

When I click on the tab with a + on it, located next to the active tab a new page does not open. If I click on "New Tab" in the File menu a new tab does not open.

Hi jcatx2013, we don't really have enough information on your system to make specific suggestions...
Could you test in Firefox's Safe Mode? That's a standard diagnostic tool to bypass interference by extensions (and some custom settings). More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using
Help > Restart with Add-ons Disabled
In the dialog, click "Start in Safe Mode" (''not'' Reset)
Any difference?

The type or namespace name 'Optimization' does not exist in the namespace 'System.Web'

App_Start\BundleConfig.cs (1): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Global.asax.cs (4): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\BundleConfig.cs (8): The type or namespace name 'BundleCollection' could not be found (are you missing a using directive or an assembly reference?)
I'm getting the above errors when attempting to create a remote build.
I've tried the solution found here (http://blog.davidebbo.com/2014/01/the-right-way-to-restore-nuget-packages.html) but no luck.

Hi,
I have an asp.net mvc project in Visual Studio 2013. I'm hosting it on Visual Studio Online.
The project builds fine on my local machine/Visual Studio 2013. When i try to do a build on Visual Studio Online (i created a build definition there), i get similar errors.
App_Start\BundleConfig.cs (2): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\FilterConfig.cs (2): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\RouteConfig.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Controllers\HomeController.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Controllers\HomeController.cs (9): The type or namespace name 'Controller' could not be found (are you missing a using directive or an assembly reference?)
Global.asax.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Global.asax.cs (6): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\BundleConfig.cs (9): The type or namespace name 'BundleCollection' could not be found (are you missing a using directive or an assembly reference?)
App_Start\FilterConfig.cs (8): The type or namespace name 'GlobalFilterCollection' could not be found (are you missing a using directive or an assembly reference?)
Controllers\HomeController.cs (11): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
Controllers\HomeController.cs (16): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
Controllers\HomeController.cs (23): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Helpers, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Optimization". Check to make sure the assembly exists on disk. If this
reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL".
Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages.Deployment, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "WebGrease". Check to make sure the assembly exists on disk. If this reference is required
by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "Antlr3.Runtime". Check to make sure the assembly exists on disk. If this reference
is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "Newtonsoft.Json". Check to make sure the assembly exists on disk. If this reference
is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Assembly strong name "System.Web.Mvc, Version=__MvcPagesVersion__, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL" is
either a path which could not be found or it is a full assembly name which is badly formed. If it is a full assembly name it may contain characters that need to be escaped with backslash(\). Those characters are Equals(=), Comma(,), Quote("), Apostrophe('),
Backslash(\).

I cannot install the trial for Acrobat XI Pro. The file downloaded fine, but it does not open. What can I do?

I cannot install the trial for Acrobat XI Pro. The file downloaded fine, but it does not open. What can I do?

For Windows:
http://trials2.adobe.com/AdobeProducts/APRO/11/win32/AcrobatPro_11_Web_WWMUI.exe
For MAC:
http://trials2.adobe.com/AdobeProducts/APRO/11/osx10/AcrobatPro_11_Web_WWMUI.dmg
ACROBAT XI

TS3212 I have removed my pop-up blocker completely and still receive the following error message when attempting to download iTunes: "The file was blocked because it does not have a valid digital signature that verifies its publisher".....any ideas?

have removed my pop-up blocker completely and still receive the following error message when attempting to download iTunes: "The file was blocked because it does not have a valid digital signature that verifies its publisher".....any ideas?

That suggests that the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

The list of workflow actions on the server references an assembly that does not exist

Hi,
This issue has been discussed many times in this forum , the reason why I am posting is I tried the resolution steps but I dont see any luck.
I am getting the below message from the SharePoint designer 2007 when I am trying to modify a workflow
"This list of workflow actions on the server references an assembly that does not exist. Some actions will not be available. The assembly strong name is Microsoft.SharePoint.WorkflowActions, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c.
Contact your server administrator for more information."
#1 : One of the post says "Normally you would see that error because someone has extended the Workflow actions available in SPD with a custom action developed in Visual Studio. These custom actions are loaded when your workstation reads the WSS.ACTIONS
file on the server. The file is located in the 12 hive under Template\1033\workflow. Your WSS.Actions file contains a reference to a custom action .dll which is not available on the server."
I opened the WSS.Actions file in notepad, I dont see any line with *.dll in it. Am I missing something?
#2: Another post says "The solution I discovered was that the server running my SharePoint Services was not up to .NET 3.0. As soon as I updated to .NET 3.0 everything worked.I had made sure the machine running SharePoint Designer was updated, but
had missed the SHarePoint Services server."
The server is already updated to .Net 3.0.
#3: I went to the %System Drive%\Documents and Settings\Local Settings\ApplicationData\Microsoft\SharePointDesigner.
Deleted the ProxyAssemblyCache folder but no luck.
Just checking if any one was able to resolve this issue by following any of the solution other than the above mentioned ones.
Thanks,
Cutloo

    I have the similar issue with my custom work flow. I have searched the whole day for the solution but no success, then at last a simple track works for me. Please try this if any one faces such issue.
Basically the assembly that we have define in the ACTIONS file dose not exists on the server, because of two reasons, either we have given the wrong assembly name (in our case the namespace name inside our solution) or the PublicKeyToken may differ from the
original assembly, that are deployed in GAC.
    So cross check both of these, in my case the assembly name was fine,
<Action
    Name="Move Item to Another List and Send Email"
    ClassName="MyAssemblyName.Classname"
    Assembly="MyAssemblyName,Version=1.0.0.0, Culture=neutral, PublicKeyToken=4053d1fde8a1c781"
    AppliesTo="all"
    Category="Email actions">
But the problem was in the 'PublicKeyToken', so i double click on the feature inside my solution,then in the bottom i have clicked on the manifest tab to check the entries.
<Feature xmlns="http://schemas.microsoft.com/sharepoint/" Title="MyAssemblyName Feature1" Id="f7f1bda0-5f65-40f1-a705-f6f15a41da3a" ReceiverAssembly="MyAssemblyName, Version=1.0.0.0, Culture=neutral, PublicKeyToken=0c32dbb769ed64b5"
ReceiverClass="MyAssemblyName.Features.Feature1.Feature1EventReceiver" Scope="WebApplication"></Feature>
Here i got the actual PublicKeyToken for my assembly (0c32dbb769ed64b5), i have replaced this number inside ACTIONS file, deploy the soultion, reset IIS.
It works for me,

OWM says "The directory OH /owm/wallets/oracle" does not exist

Hello, RHEL 6, x86-64
Oracle 11.2.0.4 Ent Edition
I just upgraded the database from 11.2.0.3 to 11.2.0.4. User reports "ORA-28365: wallet is not open" while trying to access tables in a certain schema.
I have little experience with Wallet so I find out that I can "open" the wallet using OWM. I start OWM and follow the instructions in section 9.4.3 of http://docs.oracle.com/cd/B28359_01/network.111/b28530/asowalet.htm#i1006711, and after step 2 which is to select a directory for the wallet, it tells me, ""The directory <OH>/owm/wallets/oracle" does not exist". Ahh! (By the way, this was when I was pointed to the ORIGINAL oracle home (11.2.0.3) because I wanted to see if the wallet existed there.
Now I am moderately panicked. What do I try next? I gotta get the wallet open!
Thank you in advance for taking the time.
Humbly,

Hi,
If you have TDE encrypted objects, one must open the wallet from the sqlplus.
1) make sure the sqlnet.ora from your $ORACLE_HOME/network/admin has ENCRYPTION_WALLET_LOCATION parameter set, example:
ENCRYPTION_WALLET_LOCATION =
(SOURCE =
(METHOD = FILE)
(METHOD_DATA =
(DIRECTORY = /home/oracle/wallet)
2) connect as sysdba and run:
alter system set encryption wallet open identified by "wallet_password";
3) select wallet status and path from : select * from v$encryption_wallet;
4) select again from the encrypted objects

Customer PC3000 does not exist (please change entry in plant 3000)-INT STO

Hi All,
Iam getting error message while creating intercompany sto PO in my QA clinet.
(Customer PC3000 does not exist (please change entry in plant 3000)
Vendor maintained both the plant(supply and receeving plant)
Customer maintained both the company code and sales org.(supply and receeving plant) then also Iam getting same error.
I had checked OMGN t-code setting looks good.
Same setting I had tested on DEV and SANDBOX its wokring fine.
Please help me out how to solve this problem
Thanks
Raj K

Hi,
I am facing similar problem, When trying to create a PO for Intercompany stock transfer, I am getting the error message Customer XXX does not exist (Please change the entry in Plant XXXX).
This error is appearing only in the Production system, but PO is getting created in Quality system. All the Master data, Configuration in both systems appears same. If you know any solution, kindly post.
Regards,
Onkar

Getting Message - Customer PINXX does not exist

Hi experts,
While creating a P.O. I am getting a message that "CUSTOMER PINXX DOES NOT EXIST (PLEASE CHANGE ENTRY IN PLANT INXX)
*Following is the message details:-
Customer PINXX does not exist (please change entry in plant INXX)
Message no. 06849
Diagnosis
The shipping data for stock transfer processing has not been correctly maintained in Customizing.
Either no customer number has been maintained for the receiving plant, or the specified customer number does not exist for the sales organization data that has been maintained in Customizing.
Procedure
Check your input.
If the problem cannot be resolved in this way, contact your system administrator.
The latter can make the missing settings using the Implementation Guide (IMG): Set up stock transport order*
Please provide Pointers

Please check if the customer code has been extended for the proper
Sales Org.
Distr. Channe
Division
Company Code
Also refer the FAQ note 498143 and check the customising accordingly
Please check you customizing in IMG for Purchasing:
Purchase Order
Set up Stock Transport Order
Define Shipping Data for Plants
Select details for plant
Here, the customer number related to plant is defined.
Probably this customer number is no longer a valid customer number.
You need to check whether the customer number has become inactivated
in SD or FI.
If so, you need to define another valid customer number for the plant

The type or namespace name 'VisualStudio' does not exist in the namespace 'Microsoft' (are you missing an assembly reference?)

we are using VS 2013. i have created new build definition and run that created build its getting failed and showing error message as "The type or namespace name 'VisualStudio' does not exist in the namespace 'Microsoft' (are you missing an assembly
reference?)" and "The type or namespace name 'WinComboBox, UITestControl, WinTitleBar.....etc' could not be found (are you missing a using directive or an assembly reference?)". in the error log is showing the error number are "error CS0234
& error CS0246".
Actually i have created build for automation execution from MTM lab environment. i have to assign the build to the test plan. once the build is passed , i will assign to the test plan and run with automation options.
if i build the solution its getting successfully build. but when i run the created build definition it show the error message's.
Could you guide me how to resolve the above error's ?
Thanks in Advance...

Hello Divakar Ponnada,
I have checked the error CS0234 from here:
http://msdn.microsoft.com/en-us/library/0e92xd7b.aspx
It means your project cannot find the proper reference to your type "Visual Studio" from the namespace Microsoft.
May I ask this question, does your build definition means something like the following blog described?
http://www.asp.net/web-forms/overview/deployment/configuring-team-foundation-server-for-web-deployment/creating-a-build-definition-that-supports-deployment
"A build definition is the mechanism that controls how and when builds occur for team projects in TFS. "
If that is the problem, may I ask whether your build agent is in the same machine where you build your application?
The build agent will first search for the reference from its local GAC and if it cannot find it, the error like you said will reports. Please manually build your project from your build agent machine to see the result, or install Visual Studio to your build
agent machine. In that way I think your problem may fixed.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

APP-PAY-06153: System Error : Procedure pay_us_emp_dt_tax_rules.insert_fed_tax_row - ORA-20001: &1 element does not exist or has not linked to pay at step 4

Hi Experts,
I'm finding the below mentioned error while I'm saving assignment with Salary Basis, Location and Payroll.
APP-PAY-06153: System Error : Procedure pay_us_emp_dt_tax_rules.insert_fed_tax_row - ORA-20001: &1 element does not exist or has not linked to pay at step 4.
Please note that I am able to save the record if I do not any one of Salary Basis, Location. Payroll. It is basically happening on creating default tax.
Can anyone pleas let me know if you have facing the above error and resolved?
Guru

Hi Guru,
Did you check -
Error Saving A Salary Basis - pay_us_emp_dt_tax_rules.Insert_fed_tax_row (Doc ID 302878.1)
Cheers,
Vignesh

Customer Support does not exist at Adobe

UK customer support does not exists in the UK for Adobe.
I have been calling for 4 days. Yesterday I waiting with music on the Customer Support line for 1hr 20mins with music.
I have called the sales line 4 times and can get through within 2 rings. Adobe this is terrible.
I then log a call online and I just have pending - waiting verification. I have now also tried the online support "chat" only to get a message that it is not available. Come on Adobe this is awful, it 10:30 on a Friday - why no support al all.
Rob....

Cynthia,
Your situation was the same as mine. I think it is very cool that Adobe allow us 'switchers' (PC to MAC) to get a new license key. It does after all teat us with respect as customer and provide some brand loyalty. However. The problem is that the process and support for doing so it just awful. Terribly awful.
In my case, and I recommend to you, phone the freephone sales line number and ask to be put through to support. That way it costs Adobe for the time you are waiting on hold. In my case this was several calls waiting for about an hour+ each time. I was prepared ultimately to wait, but not to pay for Adobe help desk disaster. So there is a tip: Freephone sales line for any connection with Adobe.
Next tip download the 'Certificate of destruction form' and log an online support call and post the completed for in there, signed by you. This is will save you a bit of time. Next you have to phone support, but then you have to call customer service again. So there are several steps you have to go through.
This all took me weeks and tons of calls so hopefully I will reduce the number of calls you have to make with this tip?
Next tip. Watch out for the support folk cancelling your on-line support request. I had to repeatedly open calls and they cancelled them!
Next problem I had was Adobe agreed that I would just pay for postage of the new CD kit, but instead the charges my credit card for the full product including postage. I complained to my credit card company and they raised objection to Adobe. I was refunded the product cost, but of course they cancelled my card and I had to wait for a new one. Tip here is to use a card that is not critical to you life in the real world, because like me you might have to cancel your credit card as a result of dealing with Adobe. Nice one.
Why oh why as an online company do Adobe allow us to download the software and provide a key - all done over the wires. Having CD kits delivered is not environmental good and its a waste of time and effort. This is something of 10 years ago. This whole process must have cost Adobe more than the product was worth! The process had so many touch points in their organisation, this inefficiency must be very/very expensive for them. (and a waste of time for me)
We'll I might one day buy an Adobe product again, but I will first see if a competitive product will suit me better before I do.
I do think their products are cool, but they could be much more successful if they asked me into their office to tell them what and how to fix their customer interactions. I would happily contribute.

Error on new windows 8.1 project: The type or namespace name 'Foundation' does not exist in the namespace

I upgraded to win 8.1 and VS 2013. I created a new Windows 8.1 C# grid project and tried to compile it and I'm seeing the following error: Error 1 The type or namespace name 'Foundation' does not exist in the namespace [my namespace](are
you missing an assembly reference?)
The errors are in navigationhelper.cs line 59
[Windows.Foundation.Metadata.WebHostHidden] // Foundation has the squigglies
public class NavigationHelper : DependencyObject
and app.xaml.cs line 68 ==> rootFrame.Language = Windows.Globalization.ApplicationLanguages.Languages[0]; which causes this error: Error 2 The type or namespace name 'Globalization' does not exist in the namespace [my namespace] (are you missing
an assembly reference?)
Windows phone and mvc projects are working fine and I've installed all the updates and even tried to fix vs 2013.
Any help Is greatly appreciated.

I did some more investigation and noticed that if I create an app with a "." in the name then this problem occurs. For example create a windows store project with the default name "App1": this will compile.
However if I name the project "App1.Forms" to correspeond with the default namespace I want, then this problem occurs. Still investigating but anyone should be able to repro it with that step.

System.IO.FileNotFoundException: The file /_catalogs/masterpage/custom.master does not exist

Similar Messages

Maybe you are looking for