System message:Procurement of material&blocked for quality reasons(0006 883

Hi Greetings!
I have the following issue.
I need to make the message "Procurement of material & blocked for quality reasons" as Error message . Message number - 00 06 883.
This will not allow to create PO , if the "Blocking Function" - 02 "Block Request and Purchase order " is set in the QM info record.
Even though i ahve set this message as "Error" in the configuration ( Materials Management --> Purchasing --> Define Attributes of System Messages), i am getting only warning message during PO creation.
Can you please let me know if am missing any setting.
Gobinathan G

Dear sir,
GO to material master of that item go to .. PURCHASING VIEW there is a Plant specific material status chk if that is 01- blocked for production 02- blocked for BOM chk and change it then system will allow you to purchase the parts.
Kaustubh

Similar Messages

  • Restrict PO creation as material blck for quality reason in other plant

    Hi QM Experts,
    one material (say MAT-1) in maintained in  two plants (Say- X & Y).
    qm in procurement active in material for both the plants.
    created two Q-info records with material MAT-1, vendor ( Say- V-1). one info record for plant X & other for plant Y.
    while creating PO for material -( MAT-1)  in plant X, system giving error- material blocked for quality reason.
    even though in Q-info record for plant X, material is not blocked . it is blocked in Q-info record of plant Y.
    why system looking for plant Y, even when we are trying to create PO in plant X for same material and vendor.
    please guide on same,
    Thanks & Regards,
    Roshan
    Edited by: roshan s on Dec 16, 2011 6:29 AM

    hi,
    Please check ur Q-info of Mat-1 V1 and X properly and please also check ur material master in X, whethere some control key is defined in QM in Procurement or Not. If any control key is there than chcek the settings of that control key and as per ur requirement remove it .
    regards

  • Adding a comment field in block for quality reasons subscreen of XK05?

    Hi Experts,
    I have requirement to add a comment field in block for quality reasons subscreen.
    I didn't find any BADI for this requirement.
    Kindly any one advise is it possible to add this comment field in XK05.
    Regards,
    Anusha

    Hi Raymond,
    Thank you for the reply. As per the note some one already implemented the Screen Enhancement with 2 custom views. I need to add the field in any one of existing custom view. So for this I have created a Subscreen in copied function group of MGD1(Y_FE_MARA). But in the function group already 10 Subscreens were created. Is this is the problem? or else copy the FG MGD1 into another FG and create the subscreen will be feasible to my scenario?
    Please suggest me.
    Thanks and Regards,
    Muralikrishna Peravali

  • Payment block for Quality reason

    HI,
    How can I block invoice for paymant due to quality reason ?
    Regards,
    Chetan.

    Hi ,
    Check whether any inspection lot is created for that material and go thro the following
    If the Invoice block indicator is set in QM control key , when the invoice is created, the system determines whether an inspection lot exists and if necessary, sets blocking reason I. This occurs in the following instances:
    o There is still no usage decision for the inspection lot
    o The inspection lot is rejected.
    If all settings are OK  and Once GR is done, 
    In MRBR transaction , you can see the Blockage Indicator set for the Quality field.
    Once UD is given for the matl by the Quality , payment can be made after releasing by removing the blockage indicator.
    Regards
    K.M.Arun

  • How can I block Vendor for Quality Reasons at POrg Level ?

    We are currently on ERP 4.7 and are facing the following challenge:
    We want to block the Vendor using MK05 with the function Block for Quality Reasons at the POrg level.
    Example: If we define a Delivery Block in configuration to Block Goods Receipt and then assign this blocking code using MK05 for Vendor X under POrg 1002, it also blocks the Goods Receipt for this Vendor X under POrg 1001.....
    We realize that the Purchasing Block section of MK05 is per POrg but you cannot block the Goods Receipt with this functionality... only the Purchasing Documents can be blocked.
    Would appreciate any feedback, ideas...
    Thank You,
    Johanne

    Thanks very much for the feedback.
    In MK05, under the Purchasing Block section, we can select whether the Purchasing Block is applicable to all POrgs or only Selected POrg.
    This functionality is fine to block Purchasing Documents and can be controlled at the POrg Level.
    Our problem lies in the second portion of MK05 - Block for Quality Reasons - If we select a Delivery Block which is configured to Block the Goods Receipt for Vendor , even if we selected the tick box - Selected POrg only, the Goods Receipt is blocked for this Vendor for ALL POrgs.
    Johanne

  • Material Block For Procurement

    Hi Experts,
    Here we have one requirement to block material for procurement only.
    Stock at Plant should be process in normal for issue and consumption .
    In MRP 1 view i tried with Plant-sp.matl status as 01 but it block the material for procurement as well warehose movements too.
    It is very urgent.
    Thanks in advance
    Chetan Mistry

    Dear Vishal,
    There is only three types are there as below
    01     Blocked for procment/whse
    02     Blocked for task list/BOM
    99     Complete Block
    How can i config new option for material block for payment only.
    Thanks
    Chetan Mistry

  • How to block invoice posting for quality reasons

    how to block invoice posting for quality reasons.For example while doing  Goods receipt  the material is  posted to quality inspection stock. Then the material is rejected for some reasons. Once the decision is made then the  standard system allows to post invoice. But I want to restrict invoice posting once the material is rejected for quality reasons.

    posting of invoice is always allowed, the only thing you can restrict with customizing of QM in Procurement is the payment.
    if you want to block invoice posting, then you have to control this in a user exit.

  • Error - Invoice is blocked for quality inspection.

    While making payment to vendor the error shown - Error - Invoice is blocked for quality inspection.
    Can anybody help ?

    This is caused by customizing of QM in procurement.
    You can only pay if the material is released from quality status.

  • Purchase ledger invoices that are blocked for quality inspection.

    Purchase ledger invoices that are blocked for quality inspection.When invoices are keyed against a stock item that is required to be checked for quality the invoice automatically blocks. Once the check has been carried out and the batch has been released the invoice should automatically release for payment according to terms, however this is not happening.I checked MSC3N,where batch is in unrestricted and status released.Still in material document shows batch in QI.
    Can any one what is the problem.

    Hi
    check in MMBE where the material is lying under the batch .Is it under QI or Unrestricted.
    from QI07 you can put it into Unrestricted or take the UD of lot if generated.
    please revert back
    Regards
    Sujit

  • Set Up Material Block for Invoice Verification

    Hi,
    Please share your experience for customization setting under General settings for material management "Set Up Material Block for Invoice Verification".
    When should we use " Material is bloked at first read" and "Material is blocked when invoice is posted".
    Does it improve MIRO transaction performance if we chnage the setting from " Material is bloked at first read" to "Material is blocked when invoice is posted"?
    Thanks & Regards,
    AG

    Hi,
    Set Up Material Block for Invoice Verification
    Use: -
       In this step, you specify at what point materials are blocked in Invoice Verification:
       o   During the allocation phase, all materials present in the invoice are blocked.
       o   During simulation or posting, materials whose stocks are to be changed are blocked and are read again.
       o   Materials whose stocks are to be changed, are blocked and are read again when you post.
       When you post directly to a material, the given material is blocked immediately in all settings.
    Standard settings: -
    In the standard system, materials are blocked during the allocation phase.
    It is suggested to block materials during allocation phase itself, so that user has not to enter all the details and then get block error at the time of Simulation or Posting. Also it improves the performance since all these transactions need not to be carried out and system informs initially that materials are blocked.
    Also refer SAPNote 210828 - Material blocks in logistics invoice verification

  • Standard Workflow for Logistics invoice blocked for Quality

    Hi friends
    Edd here
    I am wondering if there is a standard workflow for invoice verification if the invoice is blocked for QUALITY (not quantity)
    i.e. if the Goods have been receipted Movement Type 103, to blocked stock, this should block the invoice.
    Is there a standard workflow to pick up this event (RSEG-SPGRC ('Blocking Reason: Quality' = X)
    Thanks and regards
    Edd

    There is no standard workflow for Quality, but you can create your custom wrokflow using similar logic what has been used for the Qty workflow.

  • I got an ipad mini and when i try to switch it on and configure it to use it it says IP is temporarily blocked for security reasons..what do i do?

    I got an ipad mini and when i try to switch it on and configure it to use it it says IP is temporarily blocked for security reasons..what do i do?

    An odd message?  Is this on your home network?  Could try at a library.
    Robert

  • Can't restore apple id ,you were blocked for security reasons, but to restore the need to enter the key after typing it sends a 4-digit code on the ipad , but at ipade I am not connected to icloud ,and to connect you need to recover your account

    can't restore apple id , because apple were blocked for security reasons, but to restore the need to enter the key two- step werification . after typing it , apple sends a 4-digit code on the ipad , but at ipad I am not connected to icloud ,so i cant get code . but if i want to recover apple id, i need to  connect icloud, so what to do? help !

    I have (sorry forgot to add that). I was switched around and finally I was told I would be put through to a supervisor but after being on hold for about 10 minutes the phone went dead, I did not lose connection so I do not know if I was hung up on or there was some technical difficulty. I called again yesterday and did in fact speak with a supervisor for Account Security but he told me he did not know why it was happening and put me through to a different number but that ended up not being any helpful either. That's when I decided to give it a shot on here!

  • Template.xsn. Access to locations on different site collections is blocked for security reasons

    I am using sharepoint 2010 onpremise.
    I created a custom list, content type and columns. After this I go to the list and click on the infopath button in the ribbon to customize the form. I changed the form and published to the server.
    Now I get this error when I go to some page where I have added a infopath webpart:
    The following location is in a different site collection:
    http://www.myCompany.nl/someSubsite/Lists/VraagEnAntwoord/VraagEnAntwoord/template.xsn. Access to locations on different site collections is blocked for security reasons. For more information, contact your site administrator.
    This website has anonymous access.
    I have googled and found many people with this problem, but I dont find some solution. Someone talk about create a template from infopath and then publish it to a content type. I dont understand this solution. Can someone help?

    You are actually running an older version of Firefox (8). You should update to Firefox 9.0.1 and see if that helps

  • User blocked for some reason...can't figure out ho...

    user blocked for some reason...can't figure out how to unblock!!! using for business. no support phone to get help!!!

    Hi, BHMN..., and welcome to the Community,
    Please do contact Skype Customer Service again to follow up; be sure to reference any support ticket number(s) you may have been provided. 
    Regards,
    Elaine
    http://community.skype.com/t5/Security-Privacy-Tru​st-and/How-to-un-block-a-Skype-account/td-p/799404
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Maybe you are looking for