System not allowing to post profit center
HI
I am doing manual FI posting. system not allowing to post to desired Profit center.
every time it is taking Dummy profit center. even if i am changing to System throughing message
(Dummy profit center set )
i have not assigned the profit center to cost center. because i service ( created as cost center) are used in different profit center,
i am doing only FI posting but system taking Dummi profitcenter..
Regards
Ds
Hi,
The concept of dummy profit center is to capture the costs of the transaction where the profit center is not assigned to
any cost center. Instead you can define a service profit center and assign in the service cost center so that all the cost are
accumulated in the service cost center. If other profit centers are assigned to respective cost centers excepting the
service cost center, you can manually repost the cost through KB11N. As a second option you have distribution
cycle set for profit center for month end processing so that the service profit center will distribute the values to
the respective receiver profit centers either with fixed amount or fixed percentage.
Regards,
Sadashivan
Similar Messages
-
System not allowing to post parked vendor invoice
Hi gurus,
Why system not allowing to post parked vendor invoice when workflow is used for gl document?????
It is saying not released and no one is allowed to post???
Thank youHi Mohit,
Post can be possible to next authorized level. Check settings or else go to FBV3 ,enter document number ,company code and year > Enter > where you can see the workflow tab > Click on that where you came to know how may release levels are assigned.
In same view > Click on system in menu bar > services for object > Click on workflow icon > where you came to know who is the next approver.
Regards
Mani -
CO11N-While Goods Movement System Not Allows Column/Field COST CENTER
Dear Friends,
While doing confirmation of PP/PM Order and doing goods movement the system not allows the Column/Field of COST CENTER.
Thanks and Regards,
Satyajit
PP/PMDear Thyagarajan,
1.I think the Planner Gruop will be at order level.
2.If I assigned the different Valuation Categories then I need to assign no.of G/L accounts.
Plz look for my senerio->I have a single Mnt.Order in which different operations carried out from different departments like civil,electrical,mechanical.Its like one project in PS.Now I assiged different Workkcenter/Cost Centers to respective operations.Now after confirmation,when I look the Cosing Report system shows the activity Cost departmentwise as its linked to workcenter/cost center,but material cost how it will get posted different departments?
Manually by 261->Order+Costcenter...I can post it but there is problem in Auto Goods Movement
Plz correct if wrong.
Thanks and Regards,
Satyajit -
The system is auto population partner profit center even when not provided
Hi experts,
While posting FB01,The system is auto population partner profit center even when not provided in the entry.Requested to you could you please assist us as soon as possbile.
Thanks & Best regards
SreenivasWill you please let me know where you get this field partner profit center. In my screen for FB01, I do not see any such field.
Sangram -
System is allowing to post the Adv Pmt amount more than the PO Value
Hi Experts,
I am FICO Consultant. I facing one problem regarding Advance Payment. We have a process to for making advance payment with reference to Purchase Order and Purchase Order Line Item. But system is allowing to post the advance payment amount more than the Purchase Order Value. I want to prevent this to happen. The system should not allow to make advance payment more than the Purchase Order value.
Please help me on this issue.
Thanks in Advance and Regards,
Alkesh MistryHI
Please create the Advance payment request with PO number using sp gl indicator as F and then make the advance payment using the request.
Regds
Rajiv -
System not allowing to use park workflow only for GL
Hi Gurus,
We have created workflow variant and selected release posting and release payment.
We want to use workflow only for GL document but when we are parking vendor invoice in fv60, system is not allowing to post parked vendor invoice and saying not released.
We want one user to park and post vendor invoice. Right now we are not able to.
Please help.
Thank youHi Mohit,
Post can be possible to next authorized level. Check settings or else go to FBV3 ,enter document number ,company code and year > Enter > where you can see the workflow tab > Click on that where you came to know how may release levels are assigned.
In same view > Click on system in menu bar > services for object > Click on workflow icon > where you came to know who is the next approver.
Regards
Mani -
System should allow to post to bank account with the available cash for cash account in fbl3n
Hi Friends,
User is posting Bank account Dr to
Cash account Cr
If cash account balance is 40000 in FBL3N, and if user posting more than that amount, then system should not allow to post
in F-02 and FB50 transactions.
Pl help me out
Thanks,Hi Mahesh,
I think we cannot go for cash Journal, because for the below entry i should make the cash account
settings as post automatically only in FS00 transaction.
Bank account Dr to
Cash account Cr
If that is the case then we cannot post manually to the cash account.
I think we need to go for some exit in validation.
correct me if iam wrong.
Thanks -
Not allow to post GR with Exceed qty.
Hi,
PO is created for 100 qyt and Inbound delivery is for 120 qyt.
Now while posting the Goods receipts, system is not allow to post since "PO Ordered quantity exceeded by 20.
When i change the Purchase value key over and under delivery tolerance limit to 5%, eventhough system is not allow to post with exceed quantiy 120.
Can anybody help on this.
Regards,
Sudhakarsoory, i had given the worng example.
PO Quantity - 100
Inbound Delivery Qty - 120
In Purchase Value Key:
Under and Over tolerance Limit is 25 %. -
Postings on profit center but does not appear in the profit center report
Hi all!
I have a very strange problem. My customer is using cost of sales accounting. When I reconcile the cost of sales accounting profit and loss report with a profit center or cost center report I found that for a certain month there is a few descrepancies. I found that for a certain functional area I had postings on a specific account (account 451240 loss price differences) on functional area and both on cost center and profit center but these postings does not appear in the profit center or cost center reports. When I look at the postings in fbl3n or fs10n I can see that they are assigned to both cost centers and profit centers. How is this possible? How can a posting be made to a cost center or profit center but not appear in the corresponding reports?
Many thanks for help in advance,
ÅsaProblem solved
-
Not able to get profit center in ODS
Hi ,
For a materila number we are not able to get profit center in Billing ODS.
In PSA we have profit center for that material.
Transfer rules: profit center mapped to 0PROFIT_CTR field.
Update rules: 0profit center mapped to source fields profit cneter .
Data source : 2LIS_13_VDITM.
But profit center we are unable to get into ods. No routine contains restrictions for profit center. How can we geet the profit center.Take a look at your ODS key, Grab a few records from your ODS that are incorrect and look them up in the PSA. My guess is that Profit Center is not part of the key and you are getting two records for your key .... the last one doesn't have Profit Center filled.
If you really want profit Center, you can make it part of the key, but since I am unsure of your data, key or scenario, it is hard to say what exactly the best solution would be.
Brian -
Hi Friends,
I am facing error message "Receiver categ. PSG is not allowed by settlement prof. SD_ROS for this sender Message no. KD031" at the time of creating sales order once entered material code.
I have also searched the same through SCN and found lots of helpful responses, but my question is how this Settlement Profile is getting determined at the time of creating sales order?
Thanks,
PratikHi
Go to OKO6 or OKO7... Change your settlement profile PP01
However, I recommend not to change PP01.. Make a copy of PP01 and assign it your Prod order... Allow Order item in the settlement Profile
br, Ajay M -
We want system not allow to extranal number in migo for batch?
Hi,
In the MIGo we activated internal number generation but system allowing to enter external number for that how we can put restrication for external number. We want system not allow to extranal number?
Regards,
ChannaHi
Please find the below path
With respect tomovementtype 101or 105 you maintain automatic and no manul creation system no allow to external numbber
SPRO->Logistics - General->Batch Management->Creation of New Batches->Define Batch Creation for Goods Movements
Reagrds
Channa -
Why am I not allowed to post here?
I just tried to post a question and got "You are not allowed to post or edit this content". What and why ?
rccharles wrote:
and have yet to be logged out
You have pull. I haven't been so lucky. I've been logged out even with reloadevery -- reload failed. I'm now reloading my profile.
https://discussions.apple.com/people/rccharles?view=discussions
Robert
IF I have pull, I sure would like to use it on other stuff. No pull just a regimen that works 100% of the time
Try this, works 100% of the time, IF you follow this EXACT WorkFlow... (the numbered list assume receiving an email notice)
Go to your forum of choice Main Page (this will become your 'Base Camp' page)
click Login, which takes you to the Login page
Browser Bookmark that Login Page
click [Sign In]
you are now logged in and have started a 'timer' in a set cookie
you will be logged off without notice after ±30 minutes of inactivity
clicking a Link that is NOT a JavaScript link resets the timer in the cookie
I use a browser add-on that reloads the Base Camp page every 20 minutes = NEVER logged off by the timer
- DO NOT close the TAB, the AutoReloader is tied to the TAB not the page itself
Safari - SafariTabReloader
Firefox - ReloadEvery: "Reload web pages automatically"
Switch to your email client or WebMail page**
Click the link to Reply
AutoSwitches to browser, thread page & post to which you are replying = Login State = TRUE
If you use an AutoReloader, all you need do the rest of your browser session is repeat #5 & #6
Vary from this WorkFlow by clicking reply in the email FIRST and all bets are off... you will experience login failed on that page but logged in on another... 100% of the time with that particular email notice - I have not found the workaround or cause
** OR CMD+click a link on BaseCamp page to open in a new TAB
https://discussions.apple.com/people/rccharles?view=discussions = VERY empty below the TAB bar and above the footer
https://discussions.apple.com/people/rccharles = normal Bio page
https://discussions.apple.com/people/ChitlinsCC?view=discussions = VERY empty below the TAB bar and above the footer
where did you come up with the " ?view=discussions " in the URL? I have never seen this advised... certainly not the plain ol' " /content " addition nor is it tt2's Magic Twangers. Are you trying to force something to happen that never will? It is a wonder you don't get a 404.Not Found error!!
CCC -
Aur-general "You are not allowed to post to this mailing list"
I found a font I needed a few days ago that I couldn't find in the AUR, so I made a package and threw it up on the AUR. A few days later, when I realized I didn't even end up installing it after the packaging, I searched for it to download and install it, only to find there was a package of that font from half a year ago, so I figured I'd go report my package for deletion.
The AUR wiki page states that removal requests should be emailed to aur-general. When doing this, I get an automated response from aur-general-owner stating:
"You are not allowed to post to this mailing list, and your message has
been automatically rejected. If you think that your messages are
being rejected in error, contact the mailing list owner at
[email protected]"
How do I get permission to send my removal request? And if getting permission requires something not so easy, could someone forward the email for me?https://mailman.archlinux.org/mailman/l … ur-general did you read this?
-
I've been getting messages stating that I'm not allowed to post or edit content, but the Apple technician said my posts are going through. I'm confused. Anyone else having this trouble?
if you have autodiscover.domain.com on the certificate, why are you using a DNS srv record?
What happens if you put a hosts file entry onto the external machine running outlook and point it to the external interface of the Exchange server??
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter: LinkedIn:
Facebook:
XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.
Maybe you are looking for
-
Share Screen and Cam doesn't Work in Goup Chat,
In in private chat 1 on 1 i can use share screen and cam but in Group chats now i can;t use them.... from what i know you can't use those if you chat with more than 9+ or something like this..... but in 2-3 you can use share screen and webcam.... but
-
AFS ARUN Size Substitution Not Working As Expected
Hi All, I need help with this. If any one of you have worked with AFS ARUN size substitution, kindly provide me with some details on how can I set it up. I am specially interested in setting up size substitution with two-dimensional grids. I have set
-
Hi, I am getting a problem in JUComboBoxLovBinding. Problem Description -- I have created a JComboBox with used LovBinding (using two view objects -- resortVO and testVO ). The _resortVO is the LOV VO instance. There is one button which rollbacks the
-
hi how can one be able to connect to an FTP site and get a file through a java program. plz hlp
-
Hi, as part of university project I have designed a website in a similar mould to tilllate.com and fotoparty.co.uk. I managed to find a freeware flash gallery that i have modified and am quite pleased with but stupidly managed to forget that those vi