System Preparation - SET UP LMDB

HI Dears
I updated my CR Content SOLMAN after an update Support Package.
See long text, when you activate Synchronization Connections between SLD and LMDB system in preparation in step SET UP LMDB, the error SAP CR Content Version 7.6 lower than in LMDB 9:11 source occurs.
As I  upgraded SAP CR Content in my LMDB?
Best Regards

Turns out note 1940068 is missing some detail:
This worked for me:
In step 3 which explains how to get the correct CR content version to do this I had to install an older version of SAP on a temporary server to get a copy of the full CR Content (CR_Content.zip) older than my current LMDB version so I could follow note 1962139.
1. Delete the newly created synchronization connection.
2. Create a separate namespace in the new source SLD, with the new CR
content.
3. Apply CR content version X.X (one required by you LMDB) to the newly created SLD namespace
(Please refer to SAP Note 1962139  in order to update your CR Content
of the new SLD to exactly X.X of you LMDB).
4. Connect the newly created SLD namespace to your LMDB, as CR content
source.
5. Make sure CR content version X.X has been synchronized into LMDB
(fully synchronized and incremental synchronization active). This step
is very important. Please make sure there is no pending changes in the
SAP_LMDB_LDB_0000000001 job and there is no pending changes in LMDB_ADM.
6. Apply the new CR content version 9.12 to the newly created SLD
namespace according to SAP Note 669669.
7. After the new CR content version has been synchronized with the
LMDB (no pending changes in the Advanced... popup), delete the
synchronization connection.
8. Recreate the SLD synchronization connection which you created at
the beginning.
Greg

Similar Messages

  • Error while configuring system preparation in solman step 5.6(configure SAPconnect)

    Hello,
    We have recently upgrade solman from SP4 to SP 11. I am doing reconfiguration of the Solman. Stuck in one step of system preparation ->Step 5 Configure Connectivity -> 5.6 Configure SAPconnect.
    The error which i am facing is "Email address could not be updated because of the CUA" after saving the entries. I  tried disconnecting the system from parent system and run the setup but still getting the same error.
    Any help in this regards will be highly appreciated. Let me know if more information is required.

    Hi Ravi,
    I presume
    you refer to user-id SOLMAN_BTC (default user-id) used in step 5.6 of System Preparation"
    an email address exists for above user-id
    After system/client was removed from CUA, did you re-sync system via RZ70 to SLD  and then to LMDB / SMSY?
    Please re-sync and restart "System Preparation"; hopefully that should resolve your issue.
    Best regards,
    Shaji

  • Question: clean and use multiple System Preparation

    Hi there, I am curious if this is possible:
    - How to clean the system preparation once it is set up ? I mean, I can create a system preparation, but I'd like to
    re-create it, and I dont see any "delete" button for erase the current system prep params.
    - is it possible to have multiple system preparations profiles ? or is it one for each pool?
    thanks again.
    -Oswaldo

    Hi Oswaldo,
    You can edit the system preparation file using the 'Edit System Preparation File' link on the Cloning tab of a Pool. There is no delete action for the system preparation but you can use the 'Apply System Preparation' checkbox on the Cloning tab of a Pool to enable or disable its use during cloning which will give you a similar end result.
    You can only have one system preparation file per pool
    Stephen

  • System preparation tool 3.14 fatal error

    I am on a Toshiba Portege z835 p372. I had to recover Windows 7 because it wouldn't boot. In doing so, as it began setting up for the first time, I received an error from the system preparation tool 3.14. It says that
    "C:\windows\system32\VSSAPI.DLL is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact the software vendor for support." 
    When I click "OK", I get a window that says "A fatal error occurred while trying to sysprep the machine."

    Hi,
    How do you recovery Windows 7? I assume that you use some sort of OEM recovery tool.
    And in recovery process, it uses sysprep tool to recovery. From your error information, the root cause is system file corruption.
    In this situation, Windows fails to boot, I doubt if you can boot into Safe Mode or system recovery console, anyway, you can access the menu by turning on your computer and pressing the F8 key before Windows starts.
    Advanced startup options (including safe mode)
    http://windows.microsoft.com/en-in/windows/advanced-startup-options-including-safe-mode#1TC=windows-7
    if you cannot boot into this repair console either, please use an Windows 7 installation media to boot into WinRE, and run SFC command to repair corrupted system file.
    At the command prompt, type the following command, and then press ENTER:
    sfc /scannow
    Use the System File Checker tool to repair missing or corrupted system files
    http://support.microsoft.com/kb/929833
    Alex Zhao
    TechNet Community Support

  • System Preparation Tool Must be Administrator

    Hello,
    I am attempting to run the System Preparation Tool with Windows 8.1 Enterprise x86 on an Asus T100TA. I have all of my drivers and software I want already installed on my image.
    But I am unable to run the Sysprep through the UI or Command Prompt, even though I am in the Audit Mode's Administrator account. What options are there? I already had to reinstall twice after leaving the tablet on overnight and wasn't able to get back into
    the Administrator account. I get the "You must be an administrator to run this application" message.
    Thanks,
    Zach
    zmb

    Hi Zach,
    I did some tests on my machines and it took some time. I apologize for that.
    I found the following rights are needed to run sysprep.exe:
    •Back up files and directories
    •Modify firmware environment values
    •Restore files and directories
    •Shutdown the system
    I got following error message in setuperr.log if one of the rights that are essential for running Sysprep.exe have been removed, even I am already in Administrator account.
    2014-12-18 19:49:34, Error      [0x0f0053] SYSPRP ValidateUser:User does not have required privileges to sysprep machine
    2014-12-18 19:49:34, Error      [0x0f00a1] SYSPRP WinMain: you must be an administrator.
    2014-12-18 19:49:36, Error      [0x0f0053] SYSPRP ValidateUser:User does not have required privileges to sysprep machine
    2014-12-18 19:49:36, Error      [0x0f00a1] SYSPRP WinMain: you must be an administrator.
    Please use the Local Security Settings tool to check the user rights assignments first.
    Click Start, click Run, type
    secpol.msc, and then click OK.
    In the Local Security Settings window, expand
    Local Policies, and then double-click User Rights Assignment.
    Look through the list of user rights and verify that the Administrators group has the rights that are needed to run Sysprep.exe.
    If you need to add a right, double-click the right, and then click Add.
    In Select Users or Groups, click Administrator, and then click
    Add.
    Click OK twice to add Administrator to the list of users who have that right.
    Note: If the policy that removed the necessary rights from the Administrators group is set at the Domain, Site, or Organizational Unit level, you need to modify the Group Policy
    of the domain.
    Regards
    DiWuNewfolder

  • Job terminated in source system -- Request set to red,SAPSQL_SQLS_INVALID_

    Hi All,
    can any one help on this issue.
    I run the BI statistics in production and found out the error while triggering the delta's
    Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System Response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Extractor .
    Refer to the error message.
    Procedure
    How you remove the error depends on the error message.
    Note
    If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
    Error msg :  Job terminated in source system --> Request set to red
    Message no. RSM078
    Job started
    Step 001 started (program SBIE0001, variant &0000000000756, user ID
    Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
    DATASOURCE = 0TCT_DSA1
    RLOGSYS = BCLNT300
    REQUNR = REQU_D4GZHNLA3PSQ7XRNGL0EMV6AP
    UPDMODE = D
    LANGUAGES = *
    Current Values for Selected Profile Parameters *
    abap/heap_area_nondia......... 0 *
    abap/heap_area_total.......... 2147483648 *
    abap/heaplimit................ 40894464 *
    zcsa/installed_languages...... ED *
    zcsa/system_language.......... E *
    ztta/max_memreq_MB............ 2047 *
    ztta/roll_area................ 3000320 *
    ztta/roll_extension........... 2000683008 *
    ABAP/4 processor: SAPSQL_SQLS_INVALID_CURSOR
    Job cancelled
    But delta laoding for same is working in DEV...but not in prod...
    Please suggest
    Regards
    Shweta

    Swetha
    finally found out the notes.
    Please look into them and ask you basis to implemnt,
    1161940
    1106569
    1145041
    1146851
    Please have a look and ask for implemtation in your system which are suitable for you
    We also faced the same issue job termination in source system for BI Statistics
    Regards#
    Srini

  • No system information found in LMDB

    Hello dear Forum,
    I'm facing a problem when register an ERP6.0 IDES system(ES8) to solman 7.1SP11(SMP). I run rz70 in the ERP system and then I find this technical system in SLD, as follows:
    But until now I haven't find this system in LMDB, the SAP_LMDB_LDB_0000000001 job runs normally,as follows:
    I try to register other system to SMP and it works, the only difference is that I had registered ES8 to SMP before. But due to some issues I deleted the ES8 from LMDB several days ago, now I can't find it in LMDB anymore.
    Dear experts, Do you know why this phenomenon happens and give me some advice?
    Best regards and thanks for your help,
    Pany

    Thanks Vivek,
    I create an empty ES8 in LMDB and run the report as Jansi mentioned, the system information appeared in LMDB,
    but another strange thing happens. when I click the Configure System button, this page appeared:
    It seems that it begin to configure the database system, since the ED8 is the database SID.Is it a bug or something? Could you tell me how to do then? Thank you.
    Regards,
    Pany

  • Since upgrading to Yosemite my macbook pro keeps going to sleep if I am not using it. I want it to stay on as I leave it doing things overnight etc. It was fine before the upgrade and I have all the system preference set to "never turn off"

    Since upgrading to Yosemite my macbook pro keeps going to sleep if I am not using it. I want it to stay on as I leave it doing things overnight (cd's  / recording etc. It was fine before the upgrade and I have all the system preference set to "never turn off" - Help !!!

    Good advice from Linc Davis that should sort out your query i think...
    However you dont want to set your MBP to never go to sleep...
    Adjust reasonable sleep settings...
    And the download an APP called caffiene...
    When you click it you can have your MBP never go to sleep with a single click of your menu bar... and with another click it can go to sleep normally to maintain the laptop...
    Simply click the cup... To toggle never sleep/sleep

  • File System Character Set Converter

    We are currently trying to understand the impact to our custom code in changing character sets. There is a utility(option under adadmin(Patch 1508473), that allows you to convert files in APPL_TOP. Does anyone know if this utility can be used on any directory?
    Thanks,
    Tim

    Thank you...
    What is the database version?We are using v8i
    What is the name of the utility and more details on where it can be found?"It is called the File System Character Set Converter"
    You can it discribed and where it is used in a paper titled:
    "Migrating an Applications Installation to a New Character Set" dated 11/28/2001 on Meta Link
    Is this iFS?No, from what I have found it is a utility under adadmin. It is installed via a patch #1508473.
    My question is does it automatically default to scanning files under APPL_TOP? or can I point it at another directory to scan.
    regards,
    Tim

  • SApScript- Custom Font setting ignored by the system default setting

    I have an issue related SapScript - Font Setting. Whatever Custom setting i am giving to the text written in the text-element of the Page window inside the form through paragraph or charater format e.g.
    Font Family: Times  Font Size - 12   Bold: - on . Is displaying as it is in the page window . But when I test the form for print layout through :- Utilities -> Printing Test.  All my given custom setting is override by the system default setting in the print preview of the form.
    Is there any idea or clue how to solve this isssue?
    I am using the SAP 4.7 EE IDES.
    <MOVED BY MODERATOR TO THE CORRECT FORUM>
    Edited by: Alvaro Tejada Galindo on Jun 11, 2009 10:32 AM

    Hi pankaj2008_singh,
    the chances that you get an answer for your question in this forum are very little.
    Please post your SAPscript questions in forum ABAP Development -> Form Printing.
    In spite of the name, SAPscript is not a scripting language.
    Regards,
    Karsten

  • When I send emails w/Firefox (AOL) they are time stamped i hour earlier than my PC's system clock. My system is set to Eastern Time Zone

    When I send emails w/Firefox (AOL) they are time stamped i hour earlier than my PC's system clock. My system is set to Eastern Time Zone

    The cache is mentioned several times in the report.
    Go to ~/Library/Caches/com.apple.systempreferences
    Move the Cache.db file from the com.apple.systempreferences folder to the Trash.
    Restar your Mac.
    ~ (Tilde) character represents the Home folder.
    For Lion:   To find the Home folder in OS X Lion, open the Finder, hold the Option key, and choose Go > Library

  • System prefs set as UK - but spellings in pages still seem to be US - help!

    I have my system prefs set to British (there is even a Union Flag on the top bar next to my clock et al) - however when using pages it still corrects words which are correct in English as US spellings e.g. organisation is coming up as organization. This is only happening in pages. When I'm typing on the web - e.g. the above example, it's telling me that the US is the wrong spelling - which in my case it is. What is Pages doing? How do I change this?

    If you open the inspector, click on the T (for Text) & when that opens click on the 'More' tab, down at the bottom of the new pane is a button 'Language' with a scroll down menu. Selecting 'British English' from this will lead to 'organization' being underlined in red and 'organisation' & 'colour' left alone.
    At least, this seems to work in deepest Herefordshire.
    Don

  • My Macbook Air keeps hanging on Desktop and Screen Saver of System Preference Setting indicating "loading Photos"

    My MacBook Air keeps hanging on Desktop and Screen Saver of System Preference Setting indicating "Loading Photos".
    Why is that ???

    Welcome to the Apple Support Communities
    Open Finder, select Go > Go to Folder, type ~/Library/Preferences and delete com.apple.desktop.plist

  • Job terminated in source system - Request set to red during delta load

    Hi All,
    There is issue with the delta load where as full load works fine and it results in below job termination with below log.
    Job started
    Step 001 started (program SBIE0001, variant &0000000128086, user ID ALEREMOTE1)
    Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
    DATASOURCE = 2LIS_13_VDITM
    RLOGSYS    = BWP_010
    REQUNR     = REQU_DA9R6Y5VOREXMP21CICMLZUZU
    UPDMODE    = R
    LANGUAGES  = *
             Current Values for Selected Profile Parameters               *
    abap/heap_area_nondia......... 0                                       *
    abap/heap_area_total.......... 17173577728                             *
    abap/heaplimit................ 40000000                                *
    zcsa/installed_languages...... DE                                      *
    zcsa/system_language.......... E                                       *
    ztta/max_memreq_MB............ 2047                                    *
    ztta/roll_area................ 3000000                                 *
    ztta/roll_extension........... 2000000000                              *
    Object requested is currently locked by user ALEREMOTE1
    Job cancelled after system exception ERROR_MESSAGE
    Please help me to resolve this issue.
    Thanks,
    Madhu,

    Hello,
    As per the screen shot provided below, data soruce belongs to LO, so first check in RSA7, whether it has got mark in RSA7, for which you have entries in RSA7 against the data source. If you are not able to find the data source in RSA7, then you need to set-up the update methods, based on the requirement.
    1) Direct Delta
    2) Queued Delta
    3) Unserialised V3 Update
    Once it is done, Delete the Previous Initilisation, again perform the Re-Init With Out data and now schedule the Delta Data Loads
    Hope this may Help you.
    Thanks
    PT

  • Job terminated in source system -- Request set to red

    Hi Developers and supporters can you any one help me.
    Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System Response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Extractor .
    Refer to the error message.
    Procedure
    How you remove the error depends on the error message.
    Note
    If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the
    Date        Time      Message
    13.10.2010  16:48:01  Job started
    13.10.2010  16:48:01  Step 001 started (program SBIE0001, variant &0000000024579, user ID RFCUSR)
    13.10.2010  16:48:01  DATASOURCE = 0ACTIVITY_ATTR
    13.10.2010  16:48:01  *************************************************************************
    13.10.2010  16:48:01  *          Current Values for Selected Profile Parameters               *
    13.10.2010  16:48:01  *************************************************************************
    13.10.2010  16:48:01  * abap/heap_area_nondia......... 2000683008                              *
    13.10.2010  16:48:01  * abap/heap_area_total.......... 2000683008                              *
    13.10.2010  16:48:01  * abap/heaplimit................ 40894464                                *
    13.10.2010  16:48:01  * zcsa/installed_languages...... 6EDGIJL                                 *
    13.10.2010  16:48:01  * zcsa/system_language.......... E                                       *
    13.10.2010  16:48:01  * ztta/max_memreq_MB............ 256                                     *
    13.10.2010  16:48:01  * ztta/roll_area................ 6500352                                 *
    13.10.2010  16:48:01  * ztta/roll_extension........... 2000683008                              *
    13.10.2010  16:48:01  *************************************************************************
    13.10.2010  17:57:09  ABAP/4 processor: TSV_TNEW_PAGE_ALLOC_FAILED
    13.10.2010  17:57:09  Job cancelled

    Hi SUSUSU,
    The dump is related to temp table space issue.check the space for PSATEMP table.
    Use tcode DB02 to check the table spaces, in the tree diaplayed on you left. try to see the % used for your ODS & FACT tablespaces. Incase the % are too high like 99% etc, get in touch with you BASIS team.
    Request your basis team to increase the PSATEMP table space.
    Or
    Decrease the data packet size and run the info package.
    to decreae the packet size -- in the IP screen menu --> schedular -->Datasource setting for sending data --> there change the parameter Maximum size of a data packet in kByte.
    down you can find the area to enter the data packet size .
    for ex if it is 20000 decrease it to 10000 and run the info package

Maybe you are looking for