System profiler recognizes ipod but not in finder or itunes

My ipod is recognized on system profiles but it does not appear on finder or itunes! what do i do?HELP!

Josie20 wrote:
nothing happens when i reset it and the computer doesn't see it!
Ummm...earlier you said System Profiler saw it. Did/does it look like this or something different:
iPod:
Capacity: 495.62 MB
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk3
Version: 10.01
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Apple
OS9 Drivers: No
Product ID: 0x1300
Serial Number:
S.M.A.R.T. status: Not Supported
Vendor ID: 0x05ac (Apple Computer, Inc.)
Volumes:
WALKINGSHUF:
Capacity: 495.59 MB
Available: 239.25 MB
Writable: Yes
File System: MS-DOS FAT32
BSD Name: disk3s1
Mount Point: /Volumes/WALKINGSHUF
<Edited by Moderator>

Similar Messages

  • I have a MBP running 10.6.8 and after the recent iOS update I have not been able to sync my devices. I was able to sync an ipod, but not iphone or ipad. iTunes recognizes my devices, but sync button stays grayed.

    I have a older MBP running 10.6.8 and after the recent iOS update I have not been able to sync my devices. I was able to sync an ipod, but not iphone or ipad. iTunes recognizes my devices, but sync button stays grayed. I've changed my USB hub, reinstalled iTunes and run disc cleanup. No luck.

    You said that your computer will sync other iPods? Are they iPod touches? Other iPod use different drivers the the touch And iPhone and iPad).
    You can try:
    iOS: Device not recognized in iTunes for Windows
    Does it charge? Does the iPod work?
    I would try on another computer.
    Last, make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    If defective and not abused you will walk out with a replacement

  • USB1 Recognizes iPod But Not USB2

    Hi,
    I have a Dell laptop with WindowsXP installed. As far as I know my USB2 ports are all properly configured and working correctly. But, for some reason, when my USB2 is enabled, my computer doesn't recognize my (4thGen) iPod.
    In order to update the iPod, I have to first disable my USB2, then everything works fine, albeit, at a much slower pave than USB2 (obviously.)\
    Has anyone else had this similar problem? And, if so, any answers as to how to correct it?
    Thanks!

    I was milling around some other posts and tried all the suggestions I could find pertaining to this general issue (changing drive letter of iPod; removing all the USB ports, then re-starting the laptop; purchased an external powered USB2 hub; etc. - all to no avail.
    I'm now wondering if, perhaps, this might be a hardware issue, perhaps some type of conflict pertaining to the manufacturer of my USB2 Controller? ( Intel(R)82801/FB/FBM USB2 Enhanced Host Controller -265C )
    HECK, I DON'T KNOW! :>)
    Again, everything is fine and dandy if I disable the USB2 controller (above), then update, etc. the iPOd in the USB1-mode, but not OK when the USB2 is enabled.
    Dell   Windows XP Pro  

  • Help! pc recognizes ipod but not software

    I just had my 20 gb ipod replaced with a 20gb color display ipod. Best buy did not give me the software disc according to their "warranty". I used my original disc to download the software, and updated it by using the free download on the apple website. I now have itunes 5.0 and when I connect my ipod to the computer a window pops up saying that it recognizes the ipod, but that the computer doesn't have the software and to download it from their website or the installation disc. I need help! Please anyone who knows how to fix this

    See if you missed anything here:
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • ITunes recognizes iPod but not music

    Since I downloaded iTunes 7.3.0.54, it recognizes my iPod but does not show any music. However, it shows that the iPod disk space is 3/4 full but it's classified as "other data." Is there any other way to get that music to appear? I'm trying to avoid doing a restore if at all possible.

    I had this same problem and just got off the phone with Apple Support. She told me that I'm out of luck, I should have backed all my files up. Music, photos, whatever. gone. She explained to me its like a mini computer and these things happen. It doesn't matter what generation of ipod you have. So now I have to start from the beginning and will now archive all files. I know this is not the news you wanted to hear but maybe you can sleep tonight!

  • Windows recognizes iPod, but not iTunes or iPod updater, causes freezing

    I'm having some issues with my 60GB iPod Photo. I tried to store my friend's music on my iPod as files. Upon uploading them to my own computer, some files caused freezing, requiring me to disconnect and reconnect the iPod. I finally gave up and deleted all the files stored on my iPod. All of a sudden, although Windows XP Pro recognized that an iPod was plugged in, it would no longer open iTunes automatically. When opening iTunes once the iPod was plugged in, it would cause iTunes to freeze.
    I decided to restore my iPod. About halfway through, there was an error message saying my iPod could not be restored. All songs were deleted but my iPod was still not recognized. Now, the iPod updater does not recognize that in iPod is connected, even though Windows does. The updater freezes, inhibiting me from completing my restore. iTunes freezes as well when my iPod is plugged in. My iPod displays "update in progress - do not disconnect," but nothing happens. When my iPod is not connected to the computer, I can navigate through it normally, although it does need to be unfrozen when left unused for a couple of days. I cannot tell if it plays files because they were all removed during my unsuccessful restore.
    I have tried reinstalling all my iPod related software and I have tried my iPod on more than one computer with different USB cables, but nothing works.
    Help, please!

    This is exactly the same problem that I am having I have posted on 14th March on itunes forum. I wish you luck I wait with interest to see what someone says. My ipod was working like a dream until i downloaded the update

  • Roland UM-ONE  CD-ROM does not mount on iMac OS 10.8.2 Roland driver for 10.8 installed as directed. No power ready light shows when connecting UM-ONE. System Profiler shows it, but not configured. Older UM-1X works fine. UM-ONE works on Dell Windows XP.

    UM-ONE
    Roland supplied CD-ROM does not mount or read by iMac OS 10.8.2, works with old TiBook and Dell laptop, however.
    Got latest driver from RolandUS.com (um_1mx8d_v100), installed as directed.
    No power ready light shows when connecting UM-ONE.
    System Profile shows it there, but not configured.
    With Audio MIDI Setup opened to MIDI Studio window, UM-ONE does not appear.
    Tried many things without success. Tried swapping UM-1X (formerly on Dell laptop) with UM-ONE. UM-ONE installed and worked there without any issues. MIDI instrument communicates fine.
    The UM-1X works without complaint and as expected when connected to any USB port on either the Dell or iMac, even a hub or keyboard port, just as it formerly had before changing operating systems, etc. It is old, but reliable.
    Upshot is, for now, that UM-1X works with either the Dell or the iMac, but is currently attached to the iMac. UM-ONE (2011 model) only works with the Dell (Windows XP).

    Same problem here! The only difference is that I'm using a MacBook pro 13 inch (2011)

  • My Computer recognizes iPod, but not iTunes...HELP

    My 4G 20GB iPod can't be found in iTunes but can be found on "My Computer". Any ideas on what i should do to getting songs onto my iPod?

    Ok i solved the problem. All i did was reformmat my ipod on using windows explorer. Ejected the iPod and plugged it back in. Then opened iTunes. Hopefully this can help some of you.

  • Windows Vista recognizes iPod but not iPad...

    Windows Vista (with latest service pack; 32-bit) will not recognize my iPad. It was able to before and my last iPad backup in my iTunes is dated back to March. However, now, when I plug my iPad in, it does not recognize it and does not even show up on the disc drives. I have gone through the numerous methoeds that Apple (and others) suggested including reinstalling iTunes, reinstalling the Apple Mobile Device Drivers, restarting my computer using msconfig, etc.
    To test out whether it was an Apple driver on my computer or not, I inserted my Gen 6 iPod Classic and it recognized it with no problem. If you know how to solve this, please let me know.
    Thank You,
    Tulga
    Misc. info:
    iPad - Version 4.2.1 (Need to connect to iTunes to update)
    iTunes - Version 10.4.1.10
    Windows Vista 32-bit
    iPod - Version 2.0.1 PC

    Pad not Connecting to iTunes - System Requirements
    If you've ever synced an iPod or iPhone, then you will know about these. The computer you're syncing to must have iTunes version 9.1 or later, must support USB 2.0, and the Operating System must be Mac OS X (10.5.8 or later), Windows XP (with Service Pack 3), Windows Vista, or Windows 7.
    iPad not Connecting to iTunes - Charge your iPad
    If your iPad has a low or dead battery, then it won’t show up in iTunes until it has a little bit of a charge. Charge the iPad for 10 minutes or so, then try to connect it again to see whether iPad not detected by iTunes.
    iPad not Connecting to iTunes - Restart your iPad
    To restart the iPad, hold the Sleep/Wake button until the red slider appears, then slide your finger on the slider to turn it off. Turn it back on by holding the Sleep/Wake button until the Apple logo appears.
    iPad not Connecting to iTunes - Restart your computer
    Restarting your computer can resolve any software/hardware issues that might be keeping your iPad from showing up in iTunes, and is always worth a shot.
    iPad not Connecting to iTunes - Reinstall iTunes
    If all else fails, try removing iTunes and reinstalling it to solve the problem of iPad not detected by iTunes.
    After the problem of iPad not connecting to iTunes solved out, you can do the iPad Transfer with iTunes, or you can also try the ipad to comp transfer easily and freely.
    for more visit http:/www.ipadtomactransfer.org/ipad-tips/ipad-not-connecting-to-itunes.html

  • Recognizes Ipod but not playlists?

    Hey, my computer is recognizing my Ipod when I plug it in but it wont show the playlists on my Ipod, so I therefore cant put songs onto my playlists and such. ALso whenever I plug in my Ipod there will be a prompt asking me to register my Ipod and what not, meanwhile it has already been registered, and I did it again but the prompt still comes up, any suggestions? Any help will be appreciated.

    <Ingore>
    tt2
    Message was edited by: turingtest2

  • Can I make a new itunes account for my daughters ipod but not clear out my itunes

    We only have one computer now and I want my daughter to be able to use and upload to her computer without affecting my itunes music, what do I need to do? and can this be done?

    Create two Windows User profile, one for you and one for your daughter so that each of you will maintain your own itunes library and iTunes account.  You already have yours in the computer, you just need to add a new user profile for your daughter.  Go to Control Panel/Users to add a user account (make sure it is Administrator account and not Standard account).
    Refer to this article for info:
    How to use multiple iPods, iPads, or iPhones with one computer
    http://support.apple.com/kb/HT1495

  • I just bought a new computer. have my music on my iphone and ipod but not appearing on my itunes account. Is there a way to get my music from my iphone to my itunes account?

    i I just bought a new computer. The techs that set everything up and transferred data from my old computer said that my playlists would appear when I downloaded itunes. that is not the case. Is there a way to transfer my music from my iphone to itunes?

    If the ENTIRE iTunes folder was moved or copied from the old computer to the new computer, then everything is there.
    Simply open iTunes by holding SHIFT while double clicking on the iTunes icon and then point iTunes to the iTunesLibrary.itl file.

  • My computer recognizes my old iPhone, iPad and iPod but NOT my new iPhone. What the heck???

    My computer recognizes my old iPhone, iPad and iPod but NOT my new iPhone what the heck? It was fine last week, now nothing

    When you plug in your phone go to the sidebar on the left, select the device, and select the menu you want to sync.
    For example at the top there is summary, info, apps, movies, etc.
    If you wanted to sync movies go under there and pick and chose the movies you want on the device.
    Let's assume you are doing that and syncing is not going properly. Then first double check that there is a checkmark in the top left of that page that says sync movies
    If there is uncheck and then hit apply. Then it will take all the movies off. Now re-check everything and hit apply.

  • After 10.7.2.update cannot see SD card reader in usb drive. Used to appear on desktop and start iPhoto but now nothing happens. It is recognised by system profiler (usb hub), but cannot find it anywhere.

    After 10.7.2. update cannot see SD card reader in usb drive. Used to appear on desktop and start iPhoto but now nothing happens. It is recognised by system profiler (usb hub), but cannot find it anywhere. Any ideas?

    Zap the PRAM and Reset the SMC, then try again.

  • I have an ipod nano 3rd generation 4G, computer recognizes it but not iTunes

    I have an ipod nano 3rd generation 4G, computer recognizes it but not iTunes.

    Hello bsowell,
    Thank you for using Apple Support Communities.
    You can use the following article to troubleshoot your issue:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Regards,
    Jeff D.

Maybe you are looking for

  • 1and1 webmail set up with iOS 8

    My company uses 1and1 webmail for our email. I upgraded to and iphone 6 and iOS 8. Now I cannot send email from my phone. I contacted 1and1 and they said it's an Apple issue. Wouldn't it make sense that 1and1 hasn't upgraded something? Their last ins

  • Database size by module

    Hi, ECC 6.0 SR3, ASCII, Solaris 10 SPARC, Oracle 10.2.0.4 with 1,7 TB database size. We would plan a new archive project to reduce db size. Is it possible to know (a graphic should be OK) database size by module? It's important for us know FI, MM, SD

  • Rac node failed how do you bring it back up?

    Example: If there are 3 RAC nodes and one becomes unavailable/fails, how do you bring it back up?

  • Handling JavaScript Window Status Update..

    Hi, I am developing a Flex/AIR application which renders HTML content from financial based system. I have created a subclass of the HTMLHost class in order to handle Javascript events such as window.open(). This works well, but the web application in

  • [SOLVED] systemd-nspawn container df strangeness

    I'm running arch x64 fully up to date with systemd-213-9. I built a container following the wiki article and after systemd-nspawn -bD ~/MyContainer I logged in and started playing around I noticed that df reports some failures eg root@MyContainer ~]#