System requirement for the LV and VISA run-time library
Dear
My application built from LV8.2.1 didn't run on the old-fashioned notebook, which was under XP and 256 RAM.
(The application was tested successfully in several times in other computer.)
In the only first running, there was no problem.
But after that, the application executed "twice" and one of two couldn't be removed even in Windows Task Manager.
(I had to switch off the computer for restarting PC)
However, I am not sure if this problem is a kind of the library's bug but suspect the out-of-fashioned notebook.
What's the minimum system requirement for the LV run-time library and VISA runtime library of version 8.2.1?
Or any other check points?
Lee
메시지가 08-07-2007 02:03 AM에 labmaster에 의해 편집되었음
Thank you, falkpl and smercurio_fc.
Of course, my application and the libraries have no problem in other computers.
There were no error messages but it seemed not to run normally.
My application had to show a status message prior to a VISA routine, but only a blank in the status control.
When I click the application one time, the application was not launched.
Then the two same applcations were appeared in the second click.
One of two applications could be removed by the Taskmanager. (malfunction of the program exit button.)
But the remained one can't be exited by the Taskmanager or Exit Windows.
Maybe, I had better remove the XP and then try again.
Anyway, I can't understand the reason why any NI Labview developer remained in silence for this kind of postings.
메시지가 08-07-2007 08:43 PM에 labmaster에 의해 편집되었음
Similar Messages
-
In loading Itunes down on my PC using Vitsa I keep geeting an error message saying that a program is trying to load: Microsoft Visual C++ Runtime Library and ITunes will not complete the down load. Any Suggestions
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
i would like to run the most secure version of firefox on my computer, but my computer does not meet the system requirements for the latest version. is there a way i can have the security of firefox 8 and still be able to run it on my old computer. i currently an running firefox 3.6. it is a bit slow, but it is functional.
Currently Firefox 3.6.24 is as secure as Firefox 8.0.1 is. Firefox 3.6.x will continue to get security updates until next spring, although the exact date hasn't yet been determined.
Which of the system requirements are you lacking? <br />
Processor wise you're stuck with what you got, but RAM can be upgraded. WinXP is still supported in all versions of Firefox and will be continued to be supported until Windows drops support for WinXP sometime in 2014. -
I'm trying to download the trial version of Adobe Illustrator. An error message says that the OS does not meet the minimum system requirements for the installer. 10.6.0 is the minimum required for installation. How do I get my mac to be a 10.6.0 ? Right now I have a 10.5.8 is there a way to upgrade or something?
Buy the Snow Leopard retail installer (http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA).
That will take you to 10.6.3.
If required you can then use the combo updater to get to the latest version, 10.6.8 (http://support.apple.com/kb/DL1399)
SL system reqmts; -
My pc does not meet the minimum operating system requirements for the 6th gen nano. Is there anything I can do to make it work on windows XP? This was sent to me from Apple after my previous Nano was recalled.
I think you've anwsered your own question. If it does'nt meet the minimum spec it won't work.
-
I just wanted to know if I rent a movie and I later I decide that I want to buy it, Am I going to need to download it once for the rental and a second time for the purchase?
You will need to redownload it - rentals expire and are deleted, either 30 days after renting it, or 48 hours (24 hours if you are in the US) after starting to watch it, whichever is the soonest.
-
I tried to remember the password for the iPod and introduced several times and is now locked How do I open the lock
iOS: Wrong passcode results in red disabled screen: http://support.apple.com/kb/HT1212
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
iOS: Unable to update or restore -
FAQ: What are the System Requirements for the Photoshop CS6?
System Requirements for Photoshop CS6:
Windows
Intel® Pentium® 4 or AMD Athlon® 64 processor; 2GHz or faster processor
Microsoft® Windows® XP with Service Pack 3; or Windows 7
1GB of RAM
1GB of available hard-disk space for installation; additional free space required during installation (cannot install on removable flash storage devices)
1024x768 display (1280x800 recommended) with qualified hardware-accelerated OpenGL graphics card, 16-bit color, and minimum 512MB of VRAM (Recommended - 1 GB)
DVD-ROM drive
Mac OS
Multicore Intel processor (64-bit processors only)
Mac OS X v10.6.8 or v10.7 (64-bit application only)
1GB of RAM
2GB of available hard-disk space for the files; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
1024x768 display (1280x800 recommended) with qualified hardware-accelerated OpenGL graphics card, 16-bit color, and minimum 512MB of VRAM (Recommended - 1 GB)
DVD-ROM drive
This software will not operate without online registration and activation. You must accept the license agreement to use this product.
* Some GPU-enabled features are not supported on Windows XP.
** This product may integrate with or allow access to certain Adobe or third-party hosted online services (“Online Services”). Online services are available only to users 13 and older and require agreement to additional terms of use and Adobe’s online privacy policy (see www.adobe.com/go/terms). Online services are not available in all countries or languages, may require user registration, and may be discontinued or modified in whole or in part without notice. Additional fees or subscription charges may apply.
For additional information, please read the following post:
Photoshop CS6 Operating System Support…and beyond
Thanks,
The Photoshop Development TeamSystem requirements | Photoshop
-
System Requirements for the Creative Suite 5.5 Master Collection
I am going to purchase a Mac notebook and would like to know which one will accommodate my Creative Suite 5.5 Master Collection of programs I already own from Adobe.
You can find the system requirements for Master Collection CS5.5 at System requirements | Master Collection - http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-master-collection.ht ml#main_CS5_5_Master_Collection_system_requirements.
-
I get "overLIB 4.10 or later is required for the CSS Style Plugin" on certain websites, could you please advice me as to what to do to stop this window from popping up?
Thank youTroubleshooting Plugins
https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins
Check and tell if its working. -
System Requirements for the MacOSX 10.4.4 Combo Update?
Hello,
on
http://www.apple.com/downloads/macosx/apple/macosxupdate1044combo.html
I read
System Requirements
— Mac OS X
— version 10.4, 10.4.1 or 10.4.2
I am using MacOSX 10.4.3.
Can I install this ComboUpdate?
Thanks for answers.Welcome to Apple Discussions!
Yes you can. I would though first:
1. Backup your data.
2. Repair permissions with Applications -> Utilities -> Disk Utility
3. Make sure all software and drivers you have are known to be 10.4.4 compatible.
4. Make sure the system is functioning properly before updating.
5. (dismount if necessary) and disconnect third party peripherals
6. Try the delta update first. If the delta update for some reason doesn't work, try the combo update.
If neither works, come back here, and we'll help you. -
System requirements for the Adobe Photoshop CS5.1
I am new to photoshop and have an XP Pro system SP3 pack with all the latest updates.I have 1.36 Gb of free space. Will my system handle this software?
Hi,
This link has the minimum system requirement listed for Photoshop Cs5.1: Minimum System Requirements
The operating system and free disk space you have mentioned above meet the requirement.
I would suggest you go through the link to ensure all other components on your machine meet the requirements.
Thanks -
Is there a redistribu​table for the Core NI-DAQmx Run-Time Engine?
Also, is there a silent installation option?
Hi,
I'm not sure what you mean about a redistributable, but you can download the DAqmx core run-time engine here: http://joule.ni.com/nidu/cds/view/p/id/3812/lang/en
You should be able to do silent install by following this KB: http://ae.natinst.com/public.nsf/web/searchinternal/188FE05BA8933F4486256BC300708527
Trevor B.
PSE
National Instruments -
Help required for the list and set_block_property
i have 2 questions.
1. how to assign just the column names to the list. e.g. in sql we write a query "desc [table name]" so it shows the column name. so how can we assign the column names dynamically to the list values.
2. after assigning these values how to use set_block_property to select a select a specific column name and get the results using orderly clause.
i shall be very thank full to every body who mail me these answers at
[email protected]Hi Sri lz70d7,
While filling Setup tables:
1) Did you get the Shipment Cost Document ranges that are relevant to your data
to be extracted?
2) Also give the start date something meaningful.
Most important....make the end date as a date in the future. It means you need to give
the correct Document number range to get relevant data.
Good luck, BB -
System requirements for Incopy?
Hi! I'd like our writers and editors to start using Incopy so that we (the graphic design department) can utilize the Incopy/Indesign workflow. Although our computers our powerful, the writers are working on dinosaur PCs and i'm worried their computers may choke on Incopy. Already one of their computers has crashed on the trial version. Are there any recommended system requirements for the average PC to run Incopy? I couldn't find any posted on the adobe site. I'll need to make a recommendation to our bosses for either more RAM, better computers, etc.
thanks if you have any information!Not gonna run on those dinosaur PCs. InCopy pretty much requires the same horsepower as InDesign.
BTW, keep in mind that CS5 will be shipping very soon and at that point CS4 will become rather difficult to buy. And mixing versions is not a good idea.
Bob
Maybe you are looking for
-
I want to know if this is possible. I'd obviously pay what's left for the newer version, but I don't even know if this is possible. Again, my iPod has zero scratches, hasn't been dropped, brand new. I had a case on it the whole time. Please reply! Th
-
I have all my 15.377 images in one windows folder but my LR folder tells me I have 32.045 images (number after LR folder name). In Library view I see indeed exactly more then one image and they are identical in every parameter/names. Also the numberi
-
Hi Bi experts, i need to install the business content of the purchase contract ODS and Cubes. now we are using the netweaver 2004s. can any body explain the how to install the . one more i should not overwrite the existing active
-
Navigate BSP Application from customize program
I have a customize program where I got BSP application page name, events and line number. I want to navigate it to SE80 editor with line number. Currently I am using Function module RS_TOOL_ACCESS. However it is opening the application but not naviga
-
Web starting jnlp files w/out access to Internet
I am writing a JavaFX program and am running into difficulties when trying to run from a browser since the created jnlp file is trying to access files from the dl.javafx.com website. Why are the javafx-rt.jnlp and other files like dtfx.js not part of