T-60 - Error: Blue Tooth Stack

T-60 2623D6U with XP Professional.
I was recently hit with the trojan from ... well wherever trojans come from other than USC. Anyway, it forced me to reformat and reload. Since I bought a few new programs and updated a few others there was a bit of Christmas to it as well as the crushing annoyance and time waste. After a lot of loading, some unloading and reloading, nearly everything's the way it should be, except...
Bluetooth refuses to work. When attempting to run it, I get an error message saying the Bluetooth Stack won't start. And (of course) the Bluetooth program won't find my Blackberry -- although the Blackberry sees the T-60.
I understand this is likely a drive problem. Consequently, I downloaded the latest XP Bluetooth drivers and firmware from Lenovo and installed them over the existing drivers and firmware (without deleting the old ones first). Same problem.though.
That's were matters stand now; with me out of my depth..
Please help,
BDL

I'm afraid I was unclear. There was and is no problem turning the Bluetooth (BT) radio on and off. The problem was with the Lenovo installed third party (widcomm) BT drivers themselves. I resolved the stack problem with a reformat and an update. The reformat wasn't as big a deal as it sounds since I'd only just reformatted and was in the process of rebuilding my entire system and went a little too far (whoops!). I imagine it's something we've all done.
At any rate, BT is up and running. Unfortunately, not working the way I need. I still can't make the Blackberry Desktop Manager (BDM) sync with my phone (8320 BB Curve). Again, the problem is apparently the Lenovo supplied drivers in that BDM is only compatible with the MS drivers supplied in the XP service packs and updates. I imagine I'll have to start another thread -- but I might as well give it a shot here. By chance, does anyone know how to get rid of the Lenovo drivers and replace them with Microsoft's in a way that BT will continue to function?
Thanks,
BDL
Message Edited by boar_d_laze on 02-09-2009 09:04 PM

Similar Messages

Toshiba PAN Blue Tooth networking Apple Iphone 4S & Windows Xp pro

Toshiba PAN Blue Tooth networking Apple Iphone 4S, AT&T & Windows Xp Pro
Hey trying to setup PAN on my I phone 4s.
PAM Apple I Phone Supported Blue tooth profiles
Using blue tooth stacker by Toshiba V 8.00.12, with Toshiba USB micro blue tooth adapter

Well just for internet access.
No WiFi at work and my cell provider signal is 0%.
But the Bluetooth PAM service gives you WiFi with your Bluetooth PAM …you know like LAN but with Bluetooth!
Hey if I setup my own personal WiFi at work in my cube, who has some place for me to sleep after I get fired?

HT1689 my ipad mini retina display is disabled. I believe I know the cause. I packed it with my blue tooth key board in my back pack. The key board likely entered various keys and the ipad believes these entries were invalid password attempts. I am tr

my ipad mini retina display is disabled because my blue tooth key board made number key entries while in my back pack. How do I re-enable?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430http://support.apple.com/kb/ht1430
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tbhttp://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Devicehttp://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htmhttp://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Loss of Blue tooth function after upgrade to 10.6

I have a MacBook Pro... I also have a Motorola Droid that was working perfectly with blue tooth when I was using OS 10.5 etc... I was able to "Browse" my phone, Transfer files, it worked like a dream. After upgrading my OS to Snow Leopard... I am unable to transfer files or do any thing of any value using the blue tooth connection on my computer. When I attempt to "Browse" the phone I get the message "The Device does not have the necessary services" I have searched the forums for help with this issue... I'm seeing a lot of "your phone doesn't have that capability" or "your provider has disabled that to make you pay more" or worse yet... I've seen things like "blue tooth isn't made for file transfer it's only for headsets and headphones.
Admittedly most of the people posting these questions had never been able to browse or transfer files before and were just now trying to make this work. I on the other hand had been able to use all these services. Which is why I am not considering my phone as the source of the problem at this time.
Nothing has changed on my phone "no updates in software" and the only change that was made is going from Leopard to Snow Leopard. This is leading me to the conclusion that there is something I'm not seeing in 10.6.x that has caused an issue with my blue tooth functionality... I have gone in to system preferences, in to file sharing and enabled sharing in bluetooth... I have also tried to delete the Bluetooth plist file as was suggested in other discussion forums.
This has not changed any thing I still get the same error when trying to transfer files or browse. If any one else has any advice on something I could try to return my bluetooth function to Pre10.6 that would be most helpful... I'm aware of work arounds "Emailing my self,,, etc." I'd prefer to have my bluetooth back.
Sorry if this post sounds harsh or snippy... I'm getting very frustrated.

Is it smarter economically to repair replace the board, or use the computer as it is and purchase a replacement?
This depends on your usage. If you find performance with 1GB to be satisfactory (maybe not optimal, but satisfactory), just keep using it as is. A new logic board (which will likely be used or refurbished depending on the source) is $400-$800 plus installation. I don't know what company's charge to repair the logic board.
If you decide to go with a new system, you can sell your current system to offset the cost. Or just keep it as backup/extra/computer, or give it to a family member who can use it. If I were going to give it to a family member, I'd reinstall Tiger, as it probably will work a little better in 1GB than Leopard.

!!!SOLUTION !!! Hotsync TE2 with windows 7 (64bit) via blue tooth SOLUTION !!!

I recently struggled with syncing my TE2 with the palm desktop application in windows 7 as many of you have too.
I am using Windows 7 Home Premium, Palm desktop 4.1.4 and a blue tooth dongle.
The solution I found for my problem works like this:
Find a phone that has blue tooth and add it as device on your computer.
I used a simple Nokia 2630.
The add-proces went well and it automaticly had two COM-ports assigned that it uses for syncing or backup etc.
I shut down the phone.
Started the hotsync manager from Palm.
Klicked away error messages as that the com-port is in use by another device.
Klicked right in the tray icon for hotsync.
Select setup.
Select local.
Then get a message that the port is not available.
After that I can choose a port that IS availlable.
That is one of the ports that was assigned to my Nokia phone.
I select one of these ports and close the setup screen.
I have setup a blue tooth hotsync connection on my TE2.
Hereafter I can sync my TE2 with the Palm desktop 4.1.4 without a problem.
Just don't use the phone and hotsync at the same time.
The only messagfes I got are from docstogo that powerpoint does not work anymore, but you can ignore that message.
After one hotsync these messages don't appear anymore.
I don't start the hotsync program at startup, but start it manually.
I start it in compatibilitymode for Windows XP (Servicepack 3).
Right-klick on desktop icon choose compatilbility, check first box and from the dropdownlist choose Windows XP (Service Pack 3).
Until now . . . . . . no problems.
I hope somebody can use this too.
P.S. When you start the hotsync prog it can last a little while before it appears in your taskbar.
GOOD LUCK !!!!!
Greetings,
Jacques

Do you absolutely want to use the slower BlueTooth connection, or would you rather use the USB cable as designed?
Drivers are available now for 64bit systems. See the top of the Windows HotSync board for "64 bit Palm Desktop drivers are here!"
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Nokia e90 printing problems via Blue Tooth

I cant print any words or excel documents with Blue Tooth with the Nokia E 90. I just bought a Canon Pixma 100, with Blue Tooth, but i cant make it work. Can anyone please help??

Have u switched ON the bluetooth in both the devices, does ur laptop have Bluetooth built in, Which version of Windows is your laptop running if its vista or Win7 you can use the built in bluetooth stack, go to control panel > bluetooth devices. and try to connect, If its Winxp then u need to download the drivers from Nokia website
If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

I have an iphone 5 on ios 6 and while my Bose blue tooth BT2 headset works with the phone part of it it is often not recognised by the music part of the phone. Bose cant help - can you?

My Bose T2 syncs with the iphone 5 and I speak on it without problem.
However whild i also could listen to music and audiobooks the icon which allowed me to switch from phone to apple tv to bose T2 has now disappeared and I cant listen to music on the T2.
Can you suggest what to do?
I have rebooted the phone and hte blue tooth headset.
Thanks Jonathan

Hello JD_NINJA,
Thanks for using Apple Support Communities.
Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device. To troubleshoot this issue please follow the directions below.
Check your security software
Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
Get help with iOS update and restore errors - Apple Support
When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
Restore your device from an iCloud or iTunes backup - Apple Support
Take care,
Alex H.

Iphone 4 Blue tooth phone and itoons audio over stereo mini plug Blue tooth freaks out when I use both any Ideas???

error message comes up and blue tooth freeks out
Any ideas hoew to get bluetooth phone and use music out put at the same time?

Hello,
Do you know the error message? it's a good idea when you receive an error message to include them in the forum it will allow us to better help you. So to get a better understanding of your problem you are attempting listen to music via bluetooth as well as use a hands free device?

Blue tooth not available message

message notes "blue tooth not available" how do i fix this error message

This will help you:
http://support.apple.com/kb/ht1153

Blue Tooth with Sony Ericcson and iMac

I'm trying to send pictures from my Sony Ericcson to my iMac but my phone keeps saying check the other blue tooth device (iMac).
My phone is showing up on my iMac's list of blue tooth devices found and my iMac is showing up on my phone as being found as well.
However that's as far as it goes. Here is the error message that my phone keeps giving:
CHECK BLUE TOOTH SETTINGS ON OTHER DEVICE: BLUE TOOTH VISIBLE, DEVICE VISIBLE, DEVICE IN RANGE.
I'm thing the answer to each of these questions here is yes, so why won't my phone pair with my iMac?
Thanks to all,
Trey Vollmer

Hey, Elmac.
Thanks again for helping but the instructions from this here web page don't track with my mac osx system.
I wasn't able to follow along because the steps from the web page you suggested did not match my osx.
I don't know if that makes sense to you, but I hope it does.
Trey

Blue Tooth pictures from other phone.

My freind blue tooth some picture over to my phone and I would like to use one of the pictures as a screen saver but my phone is saying the file is to large so how can I reduce the size of the file to fit my phone which is a 5230.
Solved!
Go to Solution.

Open image>options>use>set as wallpaper.
If still getting error, Open Gallery>highlight image(Single tap)>options>edit. (and crop it to fit screen,or simply use Resize option in "effects")
Previous Phones: 6600, 7610, 6230, 6230i, 1100, 1112, N70, N73, N95, N95 8GB, 5800XM, 5230, C5, iPhone 3GS, SE Xperia X10, N900, N8, SE Xperia Arc
Current Phones: Nokia N9, iPhone 4

Bluetooth Connectivity Issue with Apple Blue Tooth Keyboard

I have a blue tooth keyboard paired with my MacBook. I recently installed the latest Apple update and restarted the computer. When it fully rebooted, the keyboard was never picked up. I went into the system preferences to go through the blue tooth settings and tried to repair it or search for wireless devices. When I searched for devices, it picked up the keyboard, but when I tried to pair them, I got an error saying the keyboard was out of range and could not be connected to. I changed the batteries, turned it on and off, but still no results.
Any ideas?
I also have a bluetooth Apple Mighty Mouse which works fine, it's just the keyboard.

I know you may feel that you've already done this, but just try me.
I'm assuming you have installed 10.4.8, and all applicable security updates for your Mac- if not, please do, before you try the below.
Remove any pairing with your keyboard in your system preferences, and turn off all the bluetooth settings, including bluetooth itself. Make sure your Mighty Mouse is off, and will not be connected during this process.
-Shut down your Mac, and make sure the keyboard is off.
-Turn on your Mac, and when it's booted, open Bluetooth preferences, and turn Discoverable on.
-Go to the devices tab, and click on the 'Set up New Device' button in the lower right corner.
-When prompted, say yes to turn Bluetooth on.
-The Bluetooth assistant will begin.
-Select Keyboard from the list of devices.
-*Turn on your keyboard now, and then select continue.
Hopefully it will find your keyboard now, and you can continue to pair the keyboard with your Mac. When done, go back into Bluetooth preferences and turn Discoverable off, enable any other setting you would like, and under the device tab, select the keyboard, and click Add To Favourites.
I hope you're up and working~!
If not, we'll work on a Level 2 solution!

What is the dial number for blue tooth connection ...

Hi,
I can't seem to find out what the dial up number is for my blue tooth connection. I assumed it was my mobile mnumber but when i try this it says (on the mobile) that there is an error with connection.
I have tried calling the suport line but don't get though to any so end up hanging up.
Thanks,
Bar

have no idea on that but try 0000
Nokia N95
V 20.0.015
0546553

Desktop manager wont find Phone thru blue tooth

I need help.
When I try to connect my phone using blue tooth to the desktop manager (4.6.0.1.2), it doesnt recognize it. In the options menu the blue tooth boxes are not accessable to check. I paired up my phone with my computer and that worked using the pass key where you type in the code in your phone then your computer. It then says connecting to local service then installing modem and the blue tooth icon illuminates next to the computer time briefly then goes out. I bypass the advanced modem settings screen and it wants me to add a dial up number, name and password. As I do not wish to use my phone as the internet connection I click finish. My 8700 now shows in the window along with my mouse and headset. When I try to connect my phone it attempts to connect by saying opening port then it trys to dial by using the *99 and non existant name and password. I then get the error message. With all this said, is there any way to just connec my phone without it trying to dial up first?
Note: it does connect thru the usb cable just fine.
Thanks

Hi,
You won't be able to transfer pictures and media through the desktop manager. It's main functions are backing up and syncing to Outlook yahoo, for contacts calendar etc. You can however sync through Bluetooth. (native drivers only)
here is the link:
http://www.blackberry.com/btsc/dynamickc.do?externalId=KB04132&sliceId=SAL_Public&command=show&forwa...
As far as media is concerned the quickest, most efficient, and easiest way is to plug the USB into the PC and BB
(IF you have a MEDIA CARD in the BB), it will come up as a flash drive under windows explorer.
Then you simply drag and drop your media to the card. In Bluetooth transfer, the BB takes only one file
at a time, which is why I suggest the USB able.
There is a media Sync program that is very stable, and is a stand alone system here is the link:
http://na.blackberry.com/eng/devices/features/media/mediasync.jsp
Thanks,
If you need more info please ask! If not please resolve the thread using the options by the Kudos’ star, Just place the check in the Post that answered your question, Thanks
Message Edited by Bifocals on 10-31-2008 12:55 AM
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

What do I need to buy in order for my iPod Classic 160GB to connect with my blue tooth speaker

What do I need to buy in order for my IPod Classic 160 GB to connect with my blue tooth Ultimate Ears Boom speaker?

Upgrading RAM and your HD will give you some performance gains, but depending on what you are doing, it may not be enough. Your best friend will always be processor speed. This has a direct relation to how many cores and the speed of the RAM.
However, if you are unable to spring for a new computer, then the options of running more RAM and a biggger, faster HD should ruduce some bottle necks.
Here is a site where you can check out what your computer can handle http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade They have some charts comparing speed gains with various components.
Are you using the track freeze option to manage the track count and subsequent demands on your machine?

T-60 - Error: Blue Tooth Stack

Similar Messages

Maybe you are looking for