T.code FF7A - How to retrieve items posted before linking the GL account to

Hi Experts,
While executing the T.code FF7A, postings that have been created before making the link between the GL account and the cash position grouping are not retrieved to the report.
Does anyone know how to retrieve those past postings on FF7A report ?
Many thanks for your help.

There are a couple options depending on the additional details of your situation....
Within t-code FDFD, there is a button labeled Data Setup. This button is intended for use when cash management (CM) is activated for an existing company code and CM needs to be updated with transactions created prior to the activation. It deletes all data in cash management for the Co.Cd. and then builds the CM data for all GL, customer and vendor accounts. There are also options to update CM for other areas (Sales, Procurement, Treasury, etc.)
Also within t-code FDFD, there is a button labeled Correct Data. This button can be used instead of the Data Setup button, if the CM data for a particular area needs to be corrected. This function has the following options: All GL accounts, All GL accounts with open items, All GL accounts w/o open items (non-open item managed accounts), All Customers/Vendors, All Customers, All Vendors.
It's best to run these functions when transactions are not being created on the system.
Regards,
Shannon

Similar Messages

How to place an image in database and how to retrieve and display it in the front end

how to place an image in database and how to retrieve and display it in the front end
and to place an image in database and retrieve the image from database using xml
please,help me out.

Create a table with a Long RAW Datatype column for storing the Image Column Data.
Create the form based on the table , which by defaults the column with LONG RAW atatype to a Image Item.
You can use Forms Built in function READ_IMAGE_FILE to read a Image file stored on the file system in to the image item.
A save on the form saves the image in the Image item in the long raw column.

Code for how to read an integer array from the command prompt...

hello,
Could anyone give me the code for how to read an integer array from the command prompt...its very urgent!..

If you are using a recent version of Java (5 or later) you can use Scanner:
http://java.sun.com/javase/6/docs/api/java/util/Scanner.html
That page has some example code on it, too.

HT201209 My child received a $50 voucher for Xmas but doesn't want to use it all at once. I'd like to remove the voucher code so I can purchase items from iTunes using my usual account. Is this possible?

My child received a $50 voucher for Xmas but doesn't want to use it all at once. I'd like to remove the voucher code so I can purchase items from iTunes using my usual account. Is this possible?

Hi czigrand,
Thanks for visiting Apple Support Communities.
Currently, you can gift dollar amounts or individual items (EG. songs) on the iTunes Store. See this article for more information:
In the iTunes Store, you can gift a dollar amount or specific music, movies, TV shows, or apps from your iPhone, iPod touch, iPad, Mac, or PC. Follow these steps to send a gift from the iTunes Store.
iTunes: Sending iTunes Gifts
http://support.apple.com/kb/HT2736
Best Regards,
Jeremy

How can I download music, etc. to my Iphone 5 from my 2 previous Itunes accts.? When I download from one acct. and then try to download the items from my 2nd acct. I am told it will erase the items I downloaded from the 1st account......How can I get all

I have 2 Itunes accts. from previous Iphones. I now want to put the music, apps, etc onto my new phone from both accounts. When I sync one account to my new phone and try to sync the other items from my 2nd account - it wants to erase all of the items I synced from the 1st account. Please help! ????

There is no solution other than getting all of your content into a single iTunes library. By design, iPhone syncs or manually manages with one computer/iTunes account at a time.

How to reverse from quality and change the vendor account.

I had made GR, but posted wrong entries, instead of doing one vendor account & i had made in other vendors account, this lot is passed by quality also that means it UD is also done.
how to reverse from quality and change the vendor account.
Thanks and Regards

hi Raj,
Reversing Stock Postings Locate the document in its SAP Library structure
   1. Choose Logistics ® Materials Management ® Inventory Management ® Goods Movement ® Goods receipt ® For purchase order ® PO number known.
The initial screen for creating a goods receipt for a purchase order appears.
   2. In the field for the movement type, enter
   3. 102 (goods receipt for a purchase order into warehouse - reversal). In the field for the purchase order, enter the purchase order number for the original goods receipt.
Note
You can copy the purchase order number from the inspection lot.
   4. Choose Enter to display the selection screen for the purchase order items.
   5. Select the purchase order item for which you want to create the goods receipt and set the Stock type indicator to the stock to which the goods were originally posted with the usage decision (for example, F for unrestricted-use stock or S for blocked stock).
   6. Save the goods receipt and exit the Materials Management component.
   7. Choose Logistics ® Quality management ® Quality inspection ® Inspection lot ® Usage decision ® Change with history.
The initial screen for changing a usage decision appears.
   8. Enter the number of the inspection lot for which you previously made the usage decision and choose Usage decision (UD).
   9. To cancel the inspection lot, choose Usage decision ® Functions ® Cancel lot in the usage decision screen.

HT204053 iCloud says my Apple ID is valid but it is not an iCloud account. I find how to link on Apple services but it seems to leave me hanging. How do I actually link the 2 accounts? On a Windows 8 PC?

iClound Control Panel says my Apple ID is valid but it is not an iCloud account. How do I link the 2 accounts on a Windows 8 PC with iTunes 11. I go to Apple services and it gives some instructions; but they leave me hanging. They tell me to put in the same user name and then just stop. Doesn't say what to do next. I did what it said and the 2 accounts are still not linked. Anyone know how to assist? Thank you.

Apple isn't trying to be anti-PC with this; they support PCs going all the way back to Vista SP2, a 3-generation old version of Windows. To sync iCloud with a Mac you have to be running one of the last 2 versions of the OS X operating system (i.e., a newer version than you do on Windows). I assume it's set up this way because it's a service provided customers purchasing Apple devices that utilize iCloud syncing services, and if you happen to also you own a PC, it will sync with that as well. It wouldn't make sense for them to provide this service, including a free 5GB iCloud account, hosting for backups, syncing services, free photo stream, etc. for non-Apple customers (who, for example, may only own a PC).
If you have a friend with one of these devices who is willing to let you create the account on their device, you could then use it on your PC. They would have to delete the existing account from their device in Settings>iCloud, then let you sign in with your ID to create a new account, then delete this account from their device and sign back into their own account. You could then use this ID to sign into the newly created account on your PC. Note: each device can only create 3 iCloud accounts, so you would be using one of their 3 alotted accounts, but they may be willing to do this for you.
iCloud is really designed to keep your data in sync across multiple devices that you may own, and with your computer. It will also automatically back up your device, stream photos taken on one device to all your other devices, and allow you to locate a misplaced device using Find My iPhone. It doesn't, however, sync music if that's what you're looking for.
If you want to be able to access your music from iCloud you don't need an iCloud account for this. As mentioned earlier, music purchased from the iTunes store is already available in iCloud. Music from other sources, such as in your case, can only be accessed from iCloud if you subscribe to iTunes Match (see http://www.apple.com/itunes/itunes-match/). If you do, you can then upload your iTunes library (up to 25,000 songs) to iCloud an access them from an iOS device via iCloud, even without an iCloud account. Music purchased from other sources that is copy protected (contains DRM) is not eligible and will not be uploaded to iCloud so be sure your music purchased from Amazon doesn't contain DRM before subscribing.

HT5621 Hi, we have three iPhones and iPods which are currently linked to one apple ID. I have now set up an apple id for each phone/iPod. How do I go about re-directing the two accounts to the relevant one that has now been set up please?

Hi, we have three iPhones and iPods which are currently linked to one apple ID. I have now set up an apple id for each phone/iPod. How do I go about re-directing the two accounts to the relevant one that has now been set up please? I could do with a step by step guide to follow as am worried about loosing aps, music, photo's etc which are on the individual phones.
Thanks
Mandi

On each of the phones you're gonna use a new Apple ID for iCloud: turn off Contacts, Calendars, etc. for iCloud. You'll be prompted to keep the data or delete it from the phone, then turn off iMessage, FaceTime & delete the iCloud account...Settings>iCloud...scroll down...delete account. Then, setup iCloud using the new Apple ID, turn on iMessage & Facetime.
This will have no affect on the ID you share for iTunes content, & you can continue to do so.

How can I change my visa on the apple account

How can I change my visa on the apple account

A number of ways to do this, but on the iPad:
Open the iTunes app ans select any of the product categories at the bottom (music, for example).
Scroll down and then tap on the button with your AppleID
Tap View ID
Login
Select Payment information and edit the info, then save

How to retrieve items from Windows Explorer like My Computer?

How can a java program retrieve item names in the Windows Explorer directory structure [i.e. items in the left pane like Desktop, My Computer, Printer, Control Panel, Dial-up Networking etc.]. I retrieved all the drive names and directories using java.io.File class and displayed using JTree.

I don't believe that a lot of those items are actually "files" and directories, if you use the "dir" command in a DOS box from your Desktop I don't think you can find them...if you can then they are files etc...
Since stuff like "Control Panel" is OS specific (i.e. Windoz) then Java wouldn't support it in the core API...

How to use variables POST and personalize the fields form names

Hi friends, I need to send POST values to a external URL from APEX application to proccess a credit card and later receive the POST values to save the transaction, also the fields require have a personalized name, APEX create the field with standar names properly from APEX.
Any one can help me to solve this problem?
Thanks
Libio Balbin

I'm assuming you mean that you will be posting your page form to an external URL. This also means that the items in the form will need to have the element name be a certain name expected by the external URL. Look at Re: item name isn't what i specified to how to do this.
Basically, in the page HTML Header add a javascript function to change the name of the page items and then change the submit to go to the external website. Add to the On Load section to call the javascript when the page is loaded.

How to edit a post here in the forum?

I have noticed several posts in which the original author of the post went back into it to edit it.
How is that done? There have been many times I wanted to go back and edit.
Thank you.
Lorna in Southern California

Jabberwock, the experiment went like a slide on ice.
I did say that I would return in 15 minutes to edit a second time, but I got tied up in other things and returned to my office in about 40 minutes. I clicked onto my post as it existed in the forum list, but when it came up, it did not have that icon of the pen, so I figured that too much time had elapsed and I just let it go.
Lorna in Southern California
Edit: Oh oh. I think I discovered what might have happened. When I sent this message to be posted, a copy of the message remained "behind." THAT message had the pen icon on it. So my mistake was to go to the forum topic list for my message rather than to return to that particular page that acts like a holding tank for messages that I recently posted.
I might be way off base here, and if I am I hope someone clarifies so that anyone who is just starting out won't be misled by what I say here.....
Lorna in Southern California
Message was edited by: Lorna from Hawaii

How to retrieve TXT document attached to the document (CV03N)

Hi,
Can some one share their knowledge on how an attached document is retreived using CV03N->doc. data tab.I want to know the logic behind the attachment retrieval. Is ther a function module that pulls the file or any standard tables that conatin them.
I'd appreciate your help.
Thanks
Kris T

Hi Mangesh,
We are trying to develop a program to get a list of all documents of certain doc. type from DRAW table,retrieve all the attachments for these docs ,read these attachment files- to validate data, merge them into a single file.
from some analysis I've done to achieve this, I think we'll have to use BAPIs :BAPI_DOCUMENT_GETLIST2 and BAPI_DOCUMENT_CHECKOUTVIEWX to get the docs list and read the files.But, I am not really sure how to proceed further once we get the attachments, Can you plz share your thoughts on this . I'd appreciate your help.
Thanks
Kris T

How to retrieve data from database to the structure(complicated)

Hello everyone:
I want to retrieve data from database to the structure. but the structure defined like this below:
TOLERANZOB LIKE QAMV-TOLERANZOB
TOLERANZOB1 LIKE QAMV-TOLERANZOB
so how can I retrieve the data from the database ? make sure that the two fields contain data both.
Thanks in advance .
Regards
Nick

Hi Nick,
To retreive data for TOLERANZOB from QAMV,
If you know the key fields then use
SELECT SINGLE TOLERANZOB FROM QAMV INTO TOLERANZOB WHERE keyfields.
else, you can use
SELECT TOLERANZOB FROM QAMV UPTO ONE ROWS INTO TOLERANZOB WHERE....
Once you retreive the data using the select query, you can check if it is initial and if not move the data from TOLERANZOB to TOLERANZOB1.
<b>Reward points for helpful answers.</b>
Best Regards,
Ram.

How to validate plan data before saving the data

I have a total row in my planning layout which is a summation of plan data in 2 other rows. While saving the data, I should check whether the total is 200 and if not the data should not be saved. How can I achieve this! Any help would be appreciated.
Regards,
Tipo.

Hi,
I'm also facing the same problem in my development...I tried above all the ways,but we cannot stop saving the wrong data.In this case you have to write the java script for save button, before saving the data if it is correct then go for the next step to save other wise throw an error message or without save the data .
You need to write the JAVA script for save button,in this code you need to read the data form the layout and check the total value, i am not sure if layout is dynamic how we can achieve this???.
My development also stopped for this issue,In my case i have two layouts ,one is for actual and another one is for Planing layout(Function - Distribution equally),using the fox code i succeed to read and throw an error message for incorrect data but i can not stop to saving for incorrect total data.
Once you solved this problem please post the message in SDN.This type of requirements is very tough and we need to share to our friends.
Thanks.

T.code FF7A - How to retrieve items posted before linking the GL account to

Similar Messages

Maybe you are looking for