T-codes to get total runnig hours for machine and lab
Plz tell any one t-codes to get total runnig hours for machine and labour against the prodduction order or work center wise ..
Thanks & Regards
Punit SIngh
Hi pjd,
I'm sorry to hear of your problem getting help with your issue. Have you checked this thread to see if there's any useful information in it that would help you get this resolved??
If the information there does not help, please advise and I'll try to get you to the proper department to get this resolved for you.
Regards,
KaLin
Verizon Forum Moderator
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.
Similar Messages
-
i put in the code to get the digital copy for star trek into darkness, and i clicked download later, but it didn't show up in my movie library like the other movies i did the same thing to, where is my digital copy of star trek?
Yes, the old album art view is gone, bu you can see the album art for a song that's playing by clicking on the art image and it will open a bigger view.
Everything else in your post is a waste. I'm not going to spend time reading it. If - and I repeat if, you have a question on how to get the best out of the new look iTunes, post it. But don't spend your time in long rambling negative rants. -
Total Planned and Total Actual Hours for service order
Hi,
Is there is any table in which I can directly find the Total Planned and Total Actual Hours for service order.Pl suggest.
Regards
SBSorry SB, didn't read your post properly... I thought it was costs you were after...
AFVV holds the total actual work at operation level.
PeteA -
If I get Total Equipment Coverage for Droid Charge, will I be billed $99 when my phone is lost
and replaced with a refurbished Droid Charge? (because of the $99 deductible)Thank you to the community for your replies.
Its very frustrating when a device gets lost. Total Equipment Coverage protects you from paying full retail price for a device. Yes the deductible is 99.00 for a smart phone prior to Asurion sending out a replacement device. Please click this link to see the great benefits of Total Equipment Coverage.
Thank you -
How can I get the serial number for registration and instalation?
Hello ,How can I get the serial number for registration and instalation?
contact your local sales representative.
You don't need a serial number to install LabVIEW.
Registration is optional.
Activation is needed after the evaluation period.
Install it without number and it will work for a limited time (30days?) in evaluation mode, giving you plenty of time to decide if you want to buy it.
Check the license manager to see the activation status of everything installed.
LabVIEW Champion . Do more with less code and in less time . -
What are the T-codes that contain the master data for material and vendor?
what are the T-codes that contain the master data for material and vendor?
hi ,
- Display Material tcodes...
MM01 - Create Material
MM02 - Change Material
MM03 - Display Material
MM50 - List Extendable Materials
MMBE - Stock Overview
MMI1 - Create Operating Supplies
MMN1 - Create Non-Stock Material
MMS1 - Create Service
MMU1 - Create Non-Valuated Material
ME51N - Create Purchase Requisition
ME52N - Change Purchase Requisition
ME53N - Display Purchase Requisition
ME5A - Purchase Requisitions: List Display
ME5J - Purchase Requisitions for Project
ME5K - Requisitions by Account Assignment
MELB - Purch. Transactions by Tracking No.
ME56 - Assign Source to Purch. Requisition
ME57 - Assign and Process Requisitions
ME58 - Ordering: Assigned Requisitions
ME59 - Automatic Generation of POs
ME54 - Release Purchase Requisition
ME55 - Collective Release of Purchase Reqs.
ME5F - Release Reminder: Purch. Requisition
MB21 - Create Reservation
MB22 - Change Reservation
MB23 - Display Reservation
MB24 - Reservations by Material
MB25 - Reservations by Account Assignment
MB1C - Other Goods Receipts
MB90 - Output Processing for Mat. Documents
MB21 - Create Reservation
MB22 - Change Reservation
MB23 - Display Reservation
MB24 - Reservations by Material
MB25 - Reservations by Account Assignment
MBRL - Return Delivery per Mat. Document
MB1C - Other Goods Receipts
MB90 - Output Processing for Mat. Documents
MB1B - Transfer Posting
MIBC - ABC Analysis for Cycle Counting
MI01 - Create Physical Inventory Document
MI02 - Change Physical Inventory Document
MI03 - Display Physical Inventory Document
MI31 - Batch Input: Create Phys. Inv. Doc.
MI32 - Batch Input: Block Material
MI33 - Batch Input: Freeze Book Inv.Balance
MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
MIQ1 - Batch Input: PhInvDoc. Project Stock
MI01 - Create Physical Inventory Document
MI02 - Change Physical Inventory Document
MI03 - Display Physical Inventory Document
MI31 - Batch Input: Create Phys. Inv. Doc.
MI32 - Batch Input: Block Material
MI33 - Batch Input: Freeze Book Inv.Balance
MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
MIQ1 - Batch Input: PhInvDoc. Project Stock
MI01 - Create Physical Inventory Document
MI02 - Change Physical Inventory Document
MI03 - Display Physical Inventory Document
MI31 - Batch Input: Create Phys. Inv. Doc.
MI32 - Batch Input: Block Material
MI33 - Batch Input: Freeze Book Inv.Balance
MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
MIQ1 - Batch Input: PhInvDoc. Project Stock
MI21 - Print physical inventory document
MI04 - Enter Inventory Count with Document
MI05 - Change Inventory Count
MI06 - Display Inventory Count
MI09 - Enter Inventory Count w/o Document
MI34 - Batch Input: Enter Count
MI35 - Batch Input: Post Zero Stock Balance
MI38 - Batch Input: Count and Differences
MI39 - Batch Input: Document and Count
MI40 - Batch Input: Doc., Count and Diff.
MI08 - Create List of Differences with Doc.
MI10 - Create List of Differences w/o Doc.
MI20 - Print List of Differences
MI11 - Physical Inventory Document Recount
MI07 - Process List of Differences
MI37 - Batch Input: Post Differences
for vendor..
XKN1 Display Number Ranges (Vendor)
XK01 Create vendor (centrally)
XK02 Change vendor (centrally)
XK03 Display vendor (centrally)
XK04 Vendor Changes (Centrally)
XK05 Block Vendor (Centrally)
XK06 Mark vendor for deletion (centrally
XK07 Change vendor account group
XK11 Create Condition
XK12 Change Condition
XK13 Display Condition
XK14 Create with cond. ref. (cond. list)
XK15 Create Conditions (background job)
reward points if useful,
venkat. -
I'm getting a MacBook pro for college and just wondered how to transfer/share everything from my desktop pc to my Mac?
home sharing will work but won't transfer playcounts, ratings, and original "date added".
if you wish to keep those, use the instructions in this article here. -
How can I get a sim card for Japan and will it work with my locked Iphone 6
How can I get a sim card for Japan and will it work with my locked Iphone 6
You cannot use a SIM card on a carrier locaked phone, other than a sim from the carrier the phone is locked to. You must first get the carrier it is locked to, to unlock your phone. Apple does not unlock phones.
-
I keep getting a "missing plugin" for midi and mp3 files.
I keep getting a "missing plugin" for midi and mp3 files I want to listen to online. These are Hymn files. And I get a message telling me I have a missing plugin. Any ideas?
My husband used to be able to convert ABC files to MIDI files . This allows sheet music to be played on the computer so as to learn a tune. We get the Missing Plug in message.
I downloaded the Quicktime 7. I open Quick time, Still get the message. What is the solution?
If you need to look at an example, go to "The Session" website:
http://thesession.org/tunes/2265
Thank you,
Mary -
i am having trouble with the email that is confirming my security questions, it says it has sent it to my gmail but i have checked the email account and nothing has been sent, i have waited 24 hours for it and still nothing.
Hi Cara154,
If you are having issues receiving the email verification for your security questions, you may find the following article helpful:
When you provide a rescue email address during Apple ID creation, you will receive an email from Apple to verify that the email address provided is accurate. If you don't see an email from Apple asking you to verify your rescue email address, you may want to check your SPAM folder. If you still haven't received the email from Apple, you can sign in to My Apple ID (appleid.apple.com) to resend your rescue email address. To resend your verification email, click on Password & Security. Then, click the Resend link located in the Rescue Email Address section.
Apple Support: Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/ht5312
Regards,
- Brenden -
Im tryin to get my email verified for iMessage and FaceTime, but i don't received any emails. All info are correct (correct apple id and password). Though, i don't have any sim on my phone.
You can take a look at this support document for troubleshooting iMessage and FaceTime activation. If you have difficulty activating FaceTime or iMessage - Apple Support
I believe with the iPhone, you need to have a SIM installed, since the activation sends an international SMS to servers in the UK. Check to see what that support document states. -
HOWTO Get the text of "combo box" and "labe" controls with JavaAccessBridge
HOWTO Get the text of "combo box" and "labe" controls with JavaAccessBridge.
Please help,
I'm trying to use the Java Access Bridge (JAB) 2.1 to get the text in Java Applet controls. I've been able to use the sample code in AccessInfo.cpp sample that comes with JAB to get text from "text" controls in a Java Applet. To clarify, I am referring to the "role" in the AccessibleContextInfo struct being set to "text" or "combo box" or "label".
The problem is, when I use the AccessInfo.cpp sample to get text from a "combo box", the accessibleText data member comes back as FALSE, and thus any of the JAB text functions like GetAccessibleTextInfo fail to get any text information from "combo box" or "label" controls.
I've also tried GetCurrentAccessibleValueFromContext on the "combo box" and "label" controls, but the text returned is empty.
Can anyone help?I have new information in regards to this issue. A contact from Sun did get to me in email and relayed that that "label" objects store their text in the "name" data member of the AccessibleContext structure. This was a big help.
But I'm still stuck trying to get information from "combo box" and other controls, like "push button". The contact said, the Java Access Bridge does not provide all the information because it is already implemented by other interfaces like AccessibleComponent, AccessibleAction, or AccessibleSelection. The contact did not allude to whether these opther interfaces can be used along side the Java Access Bridge or not. So, I'm left a step closer to the goal, but still stuck without the full solution.
Can one take the Java Access Bridge functions, like say those used in the Ferret sample, and close the gap to get text back from "combo box", "push button", and other controls by using some other API in conjunction? -
Operation wise total required hours for planned order in given date range
Hello Experts,
My client wants the report to check the capacity utilization of the work centers for the all planned order in particular date range.
Is their any standard report which gives the work center wise operation wise total required hours? or which table should I use to make the customize report so that I will get total required capacity & available capacity.
Thanks in advance for use valuable suggestions.
SagarHi Mario,
Thanks for your reply,
In CM01 or CM05, we are getting requirement on weekly basis.How to get that report on daily basis? I want to give the input as a date range of the planned order.How to go for that?
Edited by: SAGAR GOLIWAR 226 on Jul 3, 2011 8:16 AM -
Custom report to get the vacation hours for the coming year befor time eval
Hi Gurus,
We have this strange requirement for the vacation hours. We need to write a report that shows the remaining vacation hours for the coming year. My functional guys told me that we will get this after we run the time evaluation for each employee. but our requirement is to get these hours before time eval and write them to a flat file.
They told me that we need to go through RPTIME00 program and get the logic where it calculates the vacation hours for the coming year. but the time schema is really big and to analyze this, it will take a long time (at least for me).
So, did anybody came across this kind of situation? Please help me.
Thanks,
Srinivas.Do you need quota? There are standard reports to project quota PT_QTA10 - Display Absence Quota Information.
-
T-codes to get payment run report for different company codes?
Hello sap gurus,
I have a scenario like -
> use of IDocs to process vendor and employee payments. Both bank transfers and checks will be processed through interface.
Now, What is the t-code to get report for payments for different customer, comp codes and vendor?
I am new to SAP in testing.
Appreciate ur help......
Regards,
Shamsher
Edited by: shamsher123 on Jun 4, 2010 11:52 AMHello,
See the List below hope this will help.
MIR5 - Display List of Invoice Documents
S_ALR_87012105 - List of Down Payments Open On Key Date - Vendors
S_ALR_87012085 - Vendor Payment History with OI Sorted List
S_P99_41000099 - Payment List
Prashant Rathore.
Maybe you are looking for
-
Creation of Purchase order - set net price in display mode
Hello, During the creation of purchase order from contract or DA (ME21N-ME59N), I want to set the net price in display mode (under any conditions) . Is there a parameter setting or a point of modification to make ithis? Thanks for your contribution.
-
I have a PCI card in my old G4 power mac. When I tried to fit it in my newer mac, which is a powermac g5 - the card doesn't appear to fit. It's a PCI card, but the little notch is in the slot to put it in. Is there any cure? This is a Delta 66 - enab
-
No Synchronisation from iTunes to iPhones4 after upgrading to iOS5
As the titel says.... iTunes wont let me synchronnise anymore. Also after the Phone boot up my music was gone. Anything else is fine. Photos, Contacts, Messages and Mails... everyting still fine except the music
-
Conditional Display of Report Columns
I'm trying to hide a vertical list column, but it is either permanently off or permanently on. Any ideas! For example:- Display Department name if not null
-
Basic I have this assignment to do but I cant built this I dont even know where to start can anyone help please. RobotPathFinder.java Application 10 x 10 grid of JButton’s or Icon’s. • 8 JButton’s for ‘Solve’, ‘Clear’, ‘Room 1-3’, ‘Forward’, ‘Rotate’