T400 4GB Vista or Windows 7 32 bits with PAE. Why not possible?

Hello,
I have read some articles about enabling 4GB of RAM in Windows Vista 32 bit version enabling PAE as discussed here: http://www.ocmodshop.com/ocmodshop.aspx?a=989
I have tried this method and others and I have disabled DEP in Windows and in the BIOS.
Is this possible to reach 4 GB of RAM in 32 bit OS with PAE in T400? I have read that in windows 2008 is possible (also linux) but why not in Vista32 or windows7 32?
Cheers!
Jorge
Message Edited by hardaway on 02-13-2009 03:53 PM
Message Edited by hardaway on 02-13-2009 03:54 PM
T400 (2767-AK3)

I mean why is not possible to use a 4GB ram in a 32 bit OS with PAE in the Lenovo T400.
I know in other machines is possible.
T400 (2767-AK3)

Similar Messages

  • In App Store I'm blocked on the window of a certain application, not possible to get out of it

    In App Store I'm blocked on the window of a certain application, not possible to get out of it

    Try closing the App Store app via the iPad's multitasking bar and see if it works ok when you re-open it :
    iOS 7 : double-click the home button to open the taskbar, and then swipe or drag the App Store app's screen from there up and off the top of the screen to close it, and click the home button to close the taskbar.
    iOS 6 and below : from the home screen (i.e. not with the App Store 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the App Store app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't fix it then you could try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • HT201272 connection with itunes is not possible

    hello,
    because my device was dead, i got a new one. and i want with my old account to download my purchased apps.
    i go on device app store, purchased, but when i add my password i get a message that connection with itunes is not possible??
    how to solve this problem?

    Refer to this article"
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368

  • Lenovo T400 Vista Ultimate 64-bit - Fingerprin​t reader not working

    I just recently upgraded from Vista Business 32-bit to Vista Ultimate 64-bit and after installing all the drivers and whatnot, I noticed the only thing not working is the fingerprint reader.
    I'm using Lenovo Fingerprint Software Version: 3.3.2.27
    which is the right version.
    I can't seem to find the driver for the fingerprint reader ANYWHERE for Vista 64-bit. Is the driver included in the software? Do I have to download it separately? If so, where? If not, then why isn't it working?!

    http://www-307.ibm.com/pc/support/site.wss/documen​t.do?lndocid=MIGR-70599
    This is the Vista 64 version of the FPR driver. It should work...
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • Windows AD with Kerberos authentication not supported for NW AS JAVA 7.1

    The Admin guide for BO 3.1 states that Windows AD with Kerberos authentication is not supported on NetWeaver AS.
    Can anybody suggest & confirm on this???

    I know we haven't been receiving cases for it, but I think in theory it should work fine. BO doesn't really care what web/app kerberos comes from as the manual authentication uses the java SDK (i.e tomcat 5.5 would use Sun JDK 1.5), and SSO kerberos (vintela) uses 3rd party libraries. It's possible our 3rd party libraries may not support netweaver yet. If I hear anything else I'll post.
    Regards,
    Tim

  • Recording at 96k with Line6 Toneport not possible with Audition??

    Is anyone else out there using a Line 6 Toneport device to record in Audition? This is a 96k recording device but choosing "96k" is not possible in Audition. I just spoke to Line 6 support and they say it's the fault of Audition. They say I have to choose 96k within Audition but I don't have to do that with my other devices. I'm able to record at 96 using other devices no problem by choosing in in the device control panel. The Line6 Toneport control panel doesn't give 96k as an option.
    So Line 6 tells me that it's impossible to record at 96k in Audition. Please tell me it isn't so???
    Anyone got any help here?
    thanks!     

    A slight departure from previous behavior is that Audition no longer automatically changes the sample rate of your device.  There were too many problems when switching between different applications (e.g. between Premiere Pro and Audition, or Audition and Windows Media Player, etc) and the clock setting changing on the device, and then the device "freaking out" (to put it politely).
    So, if there's software that came with Echo where you can change the clock settings, you might want to set it to 96 kHz there first, and then Audition CS5.5 should just go along with 96 kHz.

  • Charts with Makit, scrolling not possible

    Hello Forum,
    I'm experiencing an issue regarding Makit Charts on Mobile.
    The problem is that is not possible to scroll down the page on  mobile if the charts is 100% (width and height) and in both directions landscape and portrait.
    The chart's container is sap.m.Page and as explained in the official documentation the scrolling is provided automatically.
    I attach my code and both images (desktop and mobile).
    Hoping your answers could help me.
    Thanks.
    jQuery.sap.require("sap.m.MessageBox");
    sap.ui.jsview("demo.charts.views.Multichart", {
      getControllerName : function() {
      return "demo.charts.views.Multichart";
      createContent : function(oController) {
      var page = new sap.m.Page();
      var value = new sap.makit.Value();
      // var category = new sap.makit.Category();
      var category_axis = new sap.makit.CategoryAxis;
      var series = new sap.makit.Series();
      var bubble = new sap.makit.ValueBubble();
      category_axis.setDisplayLastLabel(true);
      page.setTitle("Multi Chart");
      value.setExpression("Netwr");
      value.setFormat("currency");
      value.setDisplayName("Revenue");
      // category.setColumn("Gjahr");
      // category.setDisplayName("Year");
      series.setColumn("Bukrs");
      series.setDisplayName("Company");
      bubble.setStyle(sap.makit.ValueBubbleStyle.FloatTop),
      bubble.setShowCategoryText(true);
      var chart = new sap.makit.Chart({
      // category : category,
      categoryAxis : category_axis,
      valueAxis : new sap.makit.ValueAxis({}),
      series : series,
      values : value,
      valueBubble : bubble,
      categoryRegions : [
                     new sap.makit.Category({ column : "Gjahr", displayName : "Year" })],
      chart.setType(sap.makit.ChartType.Column);
      chart.setShowTableView(false);
      chart.setShowRangeSelector(true);
      chart.setShowTableValue(false);
      chart.addColumn(new sap.makit.Column({
      name : "Gjahr",
      value : "{Gjahr}"
      chart.addColumn(new sap.makit.Column({
      name : "Netwr",
      value : "{Netwr}",
      type : "number"
      chart.addColumn(new sap.makit.Column({
      name : "Waerk",
      value : "{Waerk}"
      chart.addColumn(new sap.makit.Column({
      name : "Bukrs",
      value : "{Bukrs}"
      chart.setModel(this.oModel);
      chart.bindRows("/Chart_DataSet");
      chart.attachEvent("tap",function(oEvent){
      var isRightMB;
      var e = oEvent.getParameter("eventObject");
      if ("which" in e)  // Gecko (Firefox), WebKit (Safari/Chrome) &
      // Opera
      isRightMB = e.which == 3;
      else if ("button" in e)  // IE, Opera
      isRightMB = e.button == 2;
      if(isRightMB){
      var srcObj = oEvent.getSource();
      // var srcElem = srcObj.getDomRef();
      var temp = document.oncontextmenu;
      document.oncontextmenu = function (e){
      document.oncontextmenu = temp; // reset back to its
      // original state, so that
      // other elements still have
      // context menu
      return false;
      var msg = oEvent.getSource().getSelectedCategory();
      sap.m.MessageBox.show( msg, sap.m.MessageBox.Icon.INFORMATION, "Chart Right Click  - Selected Category", [sap.m.MessageBox.Action.OK] );
      chart.attachEvent("doubletap",function(oEvent){
      var chartObj = oEvent.getSource();
      var msg = oEvent.getSource().getSelectedCategory();
      sap.m.MessageBox.show( msg, sap.m.MessageBox.Icon.INFORMATION, "Chart Double Tap - Selected Category", [sap.m.MessageBox.Action.OK] );
      var oButton = oController.generateConfigPopover(chart);
      var oBar = new sap.m.Bar({
      contentLeft : [ new sap.m.Button({
      text : "Back",
      type : sap.m.ButtonType.Back,
      press : [oController.handleNavButtonPress, oController]
      contentMiddle : [ new sap.m.Label({
      text : "Multi Chart"
      contentRight : [ oButton ]
      page.setCustomHeader(oBar);
      page.addContent(chart);
      return page;

    Hi,
    I don't have "Advanced" tab in Mouse settings in control panel. Is there something i need to install in adition to Toshiba Synaptics drivers?
    I also tried changing every available setting in Synaptics drivers settings, but no change :(
    About Synaptics generic driver: Yes, I chose that one, but as I said, it's really buggy with two finger scroll, so I reverted back to Toshiba ones.

  • Playlist ordering with 4G shuffle NOT possible

    It's not possible to sync the order of songs with the 4. Generation of the iPod shuffle. THe shuffle is playing always ordered by Artist.
    Changing the order in iTunes and re-sync the iPod doesn't affect the order on the iPod shuffle.
    Is this a bug in the firmware of the 4G shuffle or a problem with iTunes?

    You can sort all the music that is not in a playlist on your shuffle. It inherits whatever sort you have selected for your entire music library in itunes. To see what I am talking about, do this:
    1. Under Library (on the left side of iTunes) click "Music"
    2. You now see on the right your entire music library. At the top, click the top of the column you want to sort by. You can right click to add more columns
    3. Sort by something different than what you are currently sorting by.
    4. Connect your shuffle and wait for it to come up
    5. When your shuffle appears on the left, open it and click "Music" and note how it is sorted. The column it is currently sorted by will be darker in its heading and their will be a triangle in that columns heading
    6. Now click on the name of your shuffle and click sync.
    7. Go back to your "Music" entry on your shuffle and you will see it is now sorted by the column you changed your iTunes music library too.
    So, your music on your shuffle will inherit the sort order you have set for your entire library on itunes, when you sync it.
    Does that make sense?
    i

  • HP Pavillion Windows Vista a6212n 32-bit with Service Pack 2 hangs up on startup.

    Big ongoing problem. Comp. has crashed many times. First startup boot is the normal Welcome Windows Home Premium screen, then blank. Second reboots as Welcome Windows Home Premium screen, goes blank and takes forever to load desktop. I’ve performed a complete System Test using PC Doctor. All tests have passed. I’ve performed many System Restores. Not helpful, the issue still persists.
    I’d appreciate any helpful input to resolve this issue.
    Thanks,
    Sherry

    Hi Sherry,
    Have you made any hardware changes to your PC?
    Usually at the windows screen is when the video driver using a higher resolution is loaded. 
    Did you run a complete hard drive surface analysis scan?
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Upgrade from Vista to Windows 7 with clean install

    I want to install Windows 7 on my Equium U-400 laptop with clean install in order to save space in my C drive. The question is how will I restore all Toshiba bundled software that my laptop came with. There is a HDD Recovery folder in the second partition but I am afraid that using this will re-install Windows Vista as well. Any help or ideas?

    >The question is how will I restore all Toshiba bundled software that my laptop came with.
    This software is bundled in recovery image only and cannot be downloaded from Toshiba download page. Just when you use recovery image you will have possibility to use this additional software.
    With additional software I mean Toshiba CD/DVD player, trail Office version or preinstalled antivirus application.
    All other stuff like Toshiba tools and utilities can be downloaded from Toshiba download page.
    http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

  • Need to upgrade Vista to Windows - problem with CC?

    Hi,
    I didnt realise the Edge animate feature would not work with Windows Vista, so what i decided to do is upgrade my operating system. However i recently reset my laptop to factory settings so i am unsure if it would appear that i have downloaded the apps on 2 computers, when in fact its the same laptop. Now that if i upgrade my operating system will that cause problems because my apps have been installed on this PC twice already?
    Also as i am upgrading... for the features of Creative Cloud ..alll of them.. is Windows 8 or 7 preferred by Adobe and are issues supported as apparently on the forums there was a post from an 'Elaine' advising Adobe didnt support Vista related probelms. This was kind of unfair as i purchased Creative Cloud for Windows Vista, this kind of gives the impression the programmes work on Vista to be fair, i could have upgraded beforehand if i'd been aware, but either way i need to get it right this time as my assignments are going overdue and i could be failed.
    I really appreciate any and all help you could give me as im in a lot of trouble.
    Thanks in advance,
    Lara.

    The better graphics option ie 780M for that Imac with the I7. I would also suggest a TB drive instead of Firewire which is higher latency and lower bandwidth for drives.
    Eric
    ADK

  • Scanstate.exe from USMT 5.0 from Windows 8.1 ADK fails on Windows XP with "%1 is not a valid Win32 application"

    We started to test our Windows XP SP3 (32-bit) to Windows 7 migration zero-touch task sequence in ConfigMgr 2012 R2 and we can't get past the following error from the "Capture User State" step running on XP...
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    The task sequence execution engine failed executing the action (Capture User State) in the group (Capture Files and Settings) with the error code 2147942593
    Action output: ...  params successful
    Building USMT command successful
    Successfully connected to "\\JHQCM01.jhq.net\SMPSTOREE_FB121F31$\A1ADF87C012E6998B5753B112299BEE4F8868207FAE3D75671798DF6A7DD1A33"
    Executing command line: "C:\_SMSTaskSequence\Packages\JHQ0004E\x86\scanstate.exe" "\\JHQCM01.jhq.net\SMPSTOREE_FB121F31$\A1ADF87C012E6998B5753B112299BEE4F8868207FAE3D75671798DF6A7DD1A33"
    /o /localonly /encrypt /keyfile:*** /efs:copyraw /v:5 /vsc /l:"C:\WINDOWS\CCM\Logs\SMSTSLog\scanstate.log" /progress:"C:\WINDOWS\CCMLogs\SMSTSLog\scanstateprogress.log" /i:"C:\_SMSTaskSequence\Packages\JHQ0004E\x86\MigApp.xml"
    /i:"C:\_SMSTaskSequence\Packages\JHQ0004E\x86\MigDocs.xml" /i:"C:\_SMSTaskSequence\Packages\JHQ0004E\x86\MigExclusions.xml"  /uel:90 /ue:VM0142511382\* /configC:\_SMSTaskSequence\Packages\JHQ0004E\config.xml
    Invoking ReleaseSource on USMTPackagePath C:\_SMSTaskSequence\Packages\JHQ0004E
    OSDMigrateUserState finished: 0x800700c1
    CreateProcess failed. Code(0x800700C1)
    Command line execution failed (800700C1). The operating system reported error 2147942593: %1 is not a valid Win32 application.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    To troubleshoot, we tried running the x86 version of scanstate.exe (from USMT from the Windows 8.1 ADK) manually by just double clicking on it on a few Windows XP SP3 systems and we get a similar error as seen below...
    So, we thought maybe USMT from our Windows 8.1 ADK install maybe somehow corrupt, but downloading and installing it again results in the same error, so it does not seem to be a file corruption issue.   The x64 version of scanstate.exe works
    fine on 64-bit OS's, its just Windows XP SP3 (32-bit) we are seeing this error.
    Has anyone successfully using scanstate.exe from USMT 5.0 from the Windows 8.1 ADK successfully to capture user state from a Windows XP SP3 (32-bit) system?
    Regards,
    JJ

    Windows 8.1 ADK comes with a newer version of USMT (NOT 5.0) and crashes. I learned this today the hard way. I hope Windows 8.0 ADK's loadstate.exe works for restoring to a 8.1 machine.
    Yesterday i used Windows Easy Transfer to move from XP to 7, and then re-did the backup in 7 so it would be compatible with 8.1, and it only restores files, not settings.
    So i will test USMT 5.0 in this same scenario, because i have 30 machines to change to newer machines with 8.1

  • T400, motherboard replaced and Windows 7 says it is not a legal license

    Hi, we have a T400, it had a problem with the motherboard and the local tech support replaced it. Now Windows says that the Windows 7 is not legal, that a Legal version of Windows should be buyed. This is a Windows 7 32bits, English. Pre-installed on the ThinkPad T400. In System Properties, at the botom, it says: Windows Activated But when I run the Windows Genuine Website, it says it is not a legal copy. Also, a pop-up appears near the time and says it is not a legal copy of windows. Should I call Microsoft an re-activate Windows 7? Many thanks Oliver

    Hi, I checked the BIOS and it has the same serial and type as in the printed label on the botom of the notebook. Also, checked que SLIC and it is present. I used everest software in order to check: http://www.mydigitallife.info/2007/03/03/slic-table-slicbin-or-acpislicbin-bios-file-for-oems-downlo... I will try these steps in order to see what happends: http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T410-update-new-BIOS-SLIC-misssing/m-p/2851... Regards, Oliver

  • Oracle Secure Backup 10.3.0.3.0 in Windows 2003 with IBM Tape Not Working

    Hi,
    I am currently implementing Oracle Secure Backup. My environment is this:
    OS: Windows Server 2003 (32Bit) for all servers
    Database: Oracle Database 11.2.0.1.0
    Tape Library: IBM-ULT 3580-TD4
    I will have to configure 2 machines to work with OSB: server01 and server02.
    Server01:
    This serves as the client, admin, mediaserver
    Server02:
    This will serve as the client, admin
    When I log in to Server01, in the device manager, I can see the Tape Drives (no warnings, no questions marks) so I think it's good.
    When I log in to Server02, in the device manager, there are no Tape Drives seen. Is is ok or shall i configure the IBM Tape drives to be also accessible since this is just the client, admin host?
    Also I have noticed that when I installed the OSB in Server02 (client,admin), when I am on the SCSI Devices, i dont see any tape device (since its not in the device manager). Because of this i cannot start OSB Services and cannot add this host to the mediaserver.
    Also, I am having issues Configuring the Library and the devices. I have read the official documentation completely but i think its very general and it does not present the detailed step-by-step process in installing and configuring OSB.
    When I issued: lsdev -lvg in the mediaserver , I can read an error: Warning: bus info unknown or drive not installed.
    Help is very much appreciated. Thanks a lot guys!

    I have resolved the issue. Ill close this thread. :))

  • Windows XP with IE8 will not load Flash Player

    I have been trying for about 1 month to download Flash Player. When I down load it it ends with installation error. When I send error report and I get a response it says an application error.Besides me who has a problem; Adobe, Windows, or IE8? Can anyone tell me?

    Hi, To whom are you sending an error report? Go to this Troubleshooting Guide and page down until you see the various errors?
    Which error are you receiving?
    Also were you following the Uninstall/Install procedures from that Guide? If not, what Adobe site were you using?
    Thanks,
    eidnolb

Maybe you are looking for

  • Adding 2 more monitors to HP p7 1435 pc

    I want to run a third monitor on my HP Pavillion p7 1435 desktop computer. When I hook the third one up using a USB Video adapter...it shows that its there but unable to get it to function at all

  • Music dropping in burned DVD

    I hope someone can help. I tried just about everything that everyone has suggested so my DVD will burn properly, but my music keep dropping at the same point in every DVD that I've burned. This is what I've done so far: Made slideshow in iPhoto - pla

  • Moving Choices control boxes

    Hello, I'm having trouble using JBCL ChoiceControl boxes (like those used to choose font size in MS Word) During my java program I remove all the items from these boxes then add new ones. The problem is that these boxes then move to the top of the Fr

  • HELP..Using BufferedInputStream

    Hi I am trying to send a video file (.mpg) from a tcp server written in C to a tcp client written in Java. The server seems to be sending the bytes accurately. But on the JAva client end, the bytes are recived but each time the numbers of bytes reciv

  • HT4859 iPad did a backup when I uploaded iCloud and some of my apps like Recipe Box disappeared.  How can I find them?  Where did they go?

    iPad2 did a backup when I uploaded iCloud and some of my apps like Recipe Box are missing.  Where would they be now?