T410 Screen/gra​phics issue

Hi!
My T410 has begun acting up a bit. The screen turns itself off after approx. 10 minutes of inactivity, even if my settings have been set to wait longer. This also occurs while viewing movies/shows in VLC, which is highly annoying (having to tap the mousepad every so often. Any tips on how to make it go away?
What I've tried:
- Reinstalling power manager
- Installed newest nVidia Verde drivers
- Updating BIOS
- Checking settings in Windows power manager as well as the ThinkVantage Power Manager
OS is Windows 7 Professional (the issue is not there in Linux (Ubuntu 11.04)).
Any advice appreciated - the issue also occurs when playing games etc., and the screen often flashes several times before "waking up" again.
Thanks!

hey Flim,
since you mentioned Ubuntu 11.04 , did this issue occur before you made your unit into a dual boot or did it happen after your T410 became a dual boot unit ?
currently the bios for your unit is at v1.38 ?
try uninstalling the power manager completely as well as the nvidia drivers and let windows install its generic video driver.
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Similar Messages

  • T410 Screen Washed Out on Wake

    Hello,
    I was wondering about an issue that I've been having... sometimes when the computer wakes up from standby (on battery power only) the screen colors become very washed out, but eventually fade back to normal. Is this a normal occurrence with the T410 screen, or is it something that I should be concerned about? Otherwise, the T410 seems to be a very solid computer.
    Solved!
    Go to Solution.

    Never mind, I solved my problem, it is normal: http://forums.lenovo.com/t5/T400-T500-and-newer-T-​series/T410-unstable-screen-brightness/td-p/212150

  • I have a 17" Macbook pro with flickering red and cyan(blue) lines across the screen. The issue disappears temporarily when I tap on the computer, and the problem does not occur when I use external display or try to screen capture the problem.

    I purchased my Macbook (17") through a certified apple tecnition in August 2012, it was refurbished and the motherboard was completely replaced. I do a lot of photo editing, but I have been unable to do so because of the red vibrating lines that interrupt my screen. The issue disappears temporarily when I tap on the computer, and the problem does not occur when I use external display or try to screen capture the problem. I brought the computer back to the technition I purchased it from and he said that it was a problem with my fan, so I have two new fans but the issue is still occuring. He says he doesnt know whats wrong. Does anyone have any information on this issue?
    Here is an image of the issue
    http://www.flickr.com/photos/67839707@N08/8884847081/

    I recommend having your Mac serviced by someone competent. A force sufficient to "blow apart" the fans was clearly excessive and may have damaged the display cable, as well as any number of other problems.
    Dust is properly cleaned with a vacuum, preferably one designed for computer service, and they are not cheap.
    Compressed air should never be used. It just blows dust everywhere, often into places where it can no longer be removed.

  • L215p - better than T410s screen? Good enough for photo editing work?

    I never had set up an external monitor with a laptop, so just have 3 questions regarding the L215p monitor.
    1) The T410s outputs screen resolution with an aspect of 16:10.  A monitor like the L215p (most new wide monitors for that matter) display an aspect of 16:9.  Can I still view with a 16:10 ratio if I use that monitor?  I never sacrifice distorted aspect ratios for more screen real estate as things never look correct to me.  When I'm watching TV and a channel broadcasts in 4:3, I never widescreen it and "stretch" the image to fill the screen because I like to see things how they were meant to be seen, if you know what I mean.  The bottom line, can I preserve the 16:10 when using this monitor (e.g. have the vertical dimension maxed out while having black letterboxed gaps on the left and right)?
    2) I'm going to be using the T410s with the L215p.  People have been subjectively rating the T410s screen from poor to mediocre, but never awesome.  Does the L215p have better image quality (contrast, dynamic range, brightness) than the T410s screen?  I know that the image quality from the L215p won't be cutting edge given the moderate price, but just wondering if it's an improvement from the T410s screen in every or most ways.
    3) I'm not a pro photographer and my livelihood doesn't depend on shooting pictures, but I do photography as a hobby.  I would like to post process my photos using Photoshop and Lightroom and was wondering if the L215p can get the job done (can it be calibrated accurately, is image reproduction to real life close enough, can I post process knowing that what I see is reasonably close to reality, etc).
    Thank you.
    ~Paul
    Lenovo ThinkPad T410s - 2901CTO
    IBM ThinkPad T41p - 2373GGU
    Solved!
    Go to Solution.

    s2kdriver80 wrote:
    Thanks.
    1) Ok understood.  I'll try to go with a monitor that has a native 16:10 aspect ratio then.
    2) I thought so too.
    3) Yes I've heard of this.  Upon further consideration, I'm scrapping the idea of the Lenovo L215p.  Lenovo had the L220x which has a VA panel but I don't know if that's been discontinued.  That had a high res 16:10 ratio.  I'm considering the Dell UltraSharp 2209WA which has an EIPS panel but that model is nearly a year and a half old.  Still ok to buy?  In any event, I'm sure the 2209WA would blow the L215p out of the water in terms of display performance.
    e-IPS is good, have a look at the Dell Outlet, you could get someones fairly cheaply, even second hand ultrasharp LCD is okay, if they have warranty on them. 
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • I am using MAC OSX 10.9.4 and LR5 Ver 5.6. I can't drag LR to my second screen. It's always worked before. All of my other apps drag to the second screen with no issues. I've re-booted my computer and it did't help. Any ideas???

    I am using MAC OSX 10.9.4 and LR5 Ver 5.6. I can't drag LR to my second screen. It's always worked before. All of my other apps drag to the second screen with no issues. I've re-booted my computer and it did't help. Any ideas???

    Make sure you are not in one of the full screen modes.
    Window > Screen Mode > Normal
    Can you see the "Traffic Lights" at the top left of the Lightroom window?

  • T410 screen occationally dims

    My computer is T410 on Windows 7.
    Sometimes, the screen slowly loses its colors and hues, and becomes too dim to see, and then slowly comes back to normal. The whole thing takes a about minute.
    I thought it's some power management problem. But I've updated to the newest version, and it could happen when the battery is fully charged too. It seems to occur randomly.
    What is the problem and how to fix it?
    Thanks!

    http://forum.thinkpads.com/viewtopic.php?f=45&t=90392
    http://forum.thinkpads.com/viewtopic.php?f=45&t=85986
    http://www.thinkpads.com/forum/viewtopic.php?f=60&t=86749&start=0
    http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T410-unstable-screen-brightness/td-p/212150
    http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T410-Screen-Washed-Out-on-Wake/m-p/228382
    http://www.thinkpads.com/forum/viewtopic.php?f=45&t=82294&start=0
    http://forum.thinkpads.com/viewtopic.php?f=45&t=91353
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • New T410 - Screen contrast goes crazy on battery!

    I got my T410 at the end of January. I noticed that when I am on batter power...the screen will suddenly, and without any apparent reason, get all washed out...the colors are all skewed and the contrast is non-existent. It will stay this way for 10-20 seconds, then slowely regenerate to normal...taking about another 30 seconds.
    This is not something I need happening during client presentations. Any help would be greatly appreciated. 

    Hi and welcome to the forum!
    Have a look at this KB:- http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T410-Screen-flickering-randomly-screen-cont...
    Let us know if it helped.
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • HT5455 Is It normal that my premium category 15" retina MBPs screen has ghosting issues, then I get declined from screen replacement?

    Is It normal that my premium category 15" retina MBPs screen has ghosting issues, and I get declined from screen replacement?
    I have purchased this hardware in Budapest for approximately 3000 usd. I was a bit shocked to see screen ghosting after a few days of use. The problem was getting worse but because I am a design consultant working mainly on my Mac I couldnt take a week off to leave It at an Apple service station.
    Last week I was surprised to receive the information from the local Apple repair shop in Germany that my retina MBP that I bought 13 months ago was declined from screen replacement by Apple.
    Considering the price of the product I find It unacceptable that I need to work on a defective product and see shadows every time I leave an Illustrator or InDesign window open for a short period of time.
    Is there any way to resolve this issue? I wouldnt like to pay another 800 dollars just to replace a component on my defective Apple product.

    Contact Apple Support directly.  In Germany the Expresslane or this number
    0800 6645 451 will allow you to speak directly to someone from Apple.    Explain your situation.   Mind you, AppleCare and issues with Apple products like this have to occur without any user accidents or user installed parts to ensure that Apple will cover you.  If there was a user accident or installed part, you may be turned down.  If you have the original Apple parts, and did the installation yourself, replace it with the original parts very carefully following the directions on http://www.ifixit.com/ unless you can afford an authorized service provider to do it for you.  Since we don't speak for Apple here, being end users like yourself, that's why I say "may", as I've seen Apple handle these things on a case by case basis.  So hopefully you don't have any obvious damage that looks like it is user caused.   Good luck!

  • [Solved] Screen brightness control issue

    I just purchased a Lenovo T410s. I have set it up to only use Nvidia and only give visibility to the Nvidia GPU. The problem I have is once X starts I can no longer change the screen brightness with the function keys. I'm using KDE and it registers that I'm trying to change the brightness but the screen never changes. If switch to run level 3 I can use the function keys to change the brightness without an issue. I'm confused at what is causing the issue. I'm not sure what information you need to help me, but I will give you what you need if you tell me.
    EDIT: I discovered on the Nvidia forums that the backlight function was disabled in the drivers for this model. Apparently when in use it causes squealing sounds.
    Last edited by migizi (2010-12-09 13:15:40)

    I did some more testing and here is what I found out. I switched my laptop to use integrated GPU only, so that means Arch sees my GPU as the Intel HD. Now I can boot X and control my brightness with the functions keys. Has anyone else run into the problem with Nvidia drivers and the Quatro NVS 3100m GPU?

  • T410s - screen makes clunk noise at bottom right support

    Hi
    When I close the screen of my T410s there is a loud audible clunk sound from the bottom right support bracket.
    It seems like the screen is a little loose at the bottom right support as there is "give" or movement at that joint.
    Has anyone come across this before and can they advise how to get this fixed?
    Thanks 

    more likely it is a hinge issue. Do you have warranty still?
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • T410s Major Fps Lagg Issue

    Hello, I have owned my Lenovo T410s for almost 18 months now.  Since the moment that I bought this laptop, it has had major FPS lagg problems while running ANY (even small and old) games.
    These are the Specs:
    Processor: Intel(R) Core(TM) i5 CPU       M 560 @ 2.67GHz
    RAM: 4GB
    64 bit operating system
    Basically, when i open any game whatsoever (even browser based java games), and run the game for less than 1-2 minutes, the FPS goes from 50 fps to 1.2-1.5fps (no joke).  It stays like this for 30 seconds, before being back to 50fps, but the process repeats every few minutes.  I have never been able to solve this problem, and look to this forum for help!
    Some other information:  When this 'fps lagg' occurs, the CPU jumps from a constant 20-30% to 100% immediately.  The laptop also becomes extremely hot, and it will burn you if you touch it for too long.  It happens from games such as Counter Strike 1.6 to Skyrim, no matter what game I play, it doesnt work!
    I have tried to do extensive research in order to find out why it doesnt work, but I have come up empty handed.  I think that the graphics card which I have is NVIDIA NVS 3100M, and it also has Intel(R) HD Graphics above it in the list (sorry i am not very good at computers!)
    Edit: I have searched through these forums, and found the following threads which people have posted all with the same problem:
    http://forums.lenovo.com/t5/T400-T500-and-newer-T-​series/T410s-Optimus-game-performance-heat/td-p/73​...
    http://forums.lenovo.com/t5/T400-T500-and-newer-T-​series/T410-Throttling/td-p/735625
    http://forums.lenovo.com/t5/T400-T500-and-newer-T-​series/T410-overheating-and-turning-off/td-p/65846​...
    http://forums.lenovo.com/t5/T400-T500-and-newer-T-​series/T410-Core-i5-CPU-throttling-gt-overheat-iss​...
    None of these people have found a solution to their problem.
    Any help to solve this problem will be muchly appreciated, thank you all

    I'd run HWMonitor to see your max temperatures too.
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • Safari Full Screen Page Displacement Issue, Scrolling Artefact.

    Hi, there
    I really want to make Safari my default browser, it seems like nearly the perfect balance between Firefox and Chrome. I have had a few issues with Safari, though. Once I upgraded to Lion, I decided to give Safari another try. It was very unstable and had weird graphical artefacts when scrolling (ie, the text would sort of copy down the page as I scrolled up.) I decided to switch back to Firefox/Aurora, but recently I chose to give Safari another shot seeing as there had been many software updates for Lion. Anyway, I found that after installing certain extensions, I had the weird scrolling artefact come back. So I've removed the offending extensions, and now that issue seems to be fixed.
    I have this other weird issue where for what ever reason, whether it's when I switch tabs or spaces (I'm unsure), the pages I've loaded in tabs will scroll up about 30 pixels (the height of the horizontal tab bar), and I can't scroll up any further. That means that it cuts off 30px of the header on YouTube and various other websites. The only way to fix/correctly re-align the pages, is to hit refresh or exit/re-enter full screen mode. I just find this annoying, it only happens in full screen mode.
    Any suggestions? Thanks in advance!

    Hi, there
    I really want to make Safari my default browser, it seems like nearly the perfect balance between Firefox and Chrome. I have had a few issues with Safari, though. Once I upgraded to Lion, I decided to give Safari another try. It was very unstable and had weird graphical artefacts when scrolling (ie, the text would sort of copy down the page as I scrolled up.) I decided to switch back to Firefox/Aurora, but recently I chose to give Safari another shot seeing as there had been many software updates for Lion. Anyway, I found that after installing certain extensions, I had the weird scrolling artefact come back. So I've removed the offending extensions, and now that issue seems to be fixed.
    I have this other weird issue where for what ever reason, whether it's when I switch tabs or spaces (I'm unsure), the pages I've loaded in tabs will scroll up about 30 pixels (the height of the horizontal tab bar), and I can't scroll up any further. That means that it cuts off 30px of the header on YouTube and various other websites. The only way to fix/correctly re-align the pages, is to hit refresh or exit/re-enter full screen mode. I just find this annoying, it only happens in full screen mode.
    Any suggestions? Thanks in advance!

  • Lenovo T400 screen goes dark issue, some video driver problem

    Lenovo:
    Motherboard:
    CPU Type: Mobile DualCore Intel Core 2 Duo P8600, 2400 MHz (9 x 267)
    Motherboard Chipset:  Intel Cantiga GM45
    System Memory: 1992 MB (DDR3 SDRAM)
    BIOS Type: Phoenix (08/19/08)
    Display:
    Video Adapter: Mobile Intel(R) 4 Series Express Chipset Family 
    Video Adapter: Mobile Intel(R) 4 Series Express Chipset Family 
    3D Accelerator: ATI Mobility Radeon HD 3470 
    Problem/Issue:
    Driver problem appeard after upgrading from XP to Windows 7.
    From the Device Manager I saw that ATI Mobility Radeon HD 3470 was not working properly and
    a) I did the "update driver software." After restart the screen light was darker than usual. (This was usual if I was working from battery but I was plugged in this time. ) 
    As I'm not the best with computers I thought my drivers might be in conflict and to prevent serious damages, I just
    b) disabled ATI Mobility Radeon HD 3470 from device manager. 
    This actually resolved the dark screen problem.
    c) then I went to Lenovo support site: http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-72858
    downloaded newest drivers for ATI Mobility Radeon HD 3400 (Switchable Graphics Driver)
    and Intel 4500MHD (Intel GM45 Express Chip)
    For some reason while installine the: Intel GM45 Display Driver (version 8.15.10.2302) gives me error:
    "This Computer Does not meet the minimum requirements for installing the software"
    Also some problem appeard when installing the new downloaded version:
    ThinkPad Switchable Graphics Driver  (version 8.792.5-110424b-119200C)
    d) so I went back to device manager and made an update to ATI Mobility Radeon  from there. 
    Well, I got it working, but the screen went dark again. When I disable the driver it goes back to normal
    brightness and when I enable it again, it stays normal.
    I'll try to restart and see what happens

    We had the excat same issue.
    I could get the picuture back pressing the power button until it went to sleep and then wake it up again.
    After the I went to device manager to delete all display drivers both Intel and ATI and then reboot.
    doing the reboot windows found some drivers it could use.
    I then installed the switchable driver from lenovo.
    Now windows device manger report two display drivers:
    1)
    ATI Mobility Radeon HD 3400 Series, Version 8.792.5.2000, Driver manufacturer ATI Technologies Inc
    2)
    Mobile Intel(R) 4 Series Express Chipset Family, Version, Version 8.792.5.2000, Driver manufacturer ATI Technologies Inc
    So it seams the switchable ATI driver take over the Intel card and the Intel driver is not needed.
    At least the problem is solved for us.
    Regards Anders

  • IPod 5th generation screen touch sensitivity issues?? Lack of sensitivity!!

    Hello all! I am just wondering if anyone else has issues with the sensitivity of their screen to touch? I have to tap my screen multiple times especially along the edges or if the buttons on the screen are smaller. The Airplane mode one is tricky for me.
    I play a game called CSR Racing and find that sometimes the buttons don't respond well.
    Is anyone out there having any issues with their screens? Should I be worried and call Apple? It gets annoying when you have to tap multiple times or have your finger tip positioned just right.
    Post up if you have any issues at all, thanks!!

    I've noticed this, too. I have new iPod touch 5th generation. Where I find it troublesome is in something like Contacts or Music. When I am looking for a contact or a song and the list of letters A-Z shows up on the right hand side, I have a to tap a letter several times before I get any response. I wasn't sure if this was a hardware or software problem, or if the letters are so small that my finger hits too many at one time. Then I noticed that when I am relaxing with a game of Solitaire, the cards along the right edge of the screen often won't respond on the first tap. I am curious about this, too. Otherwise I am pretty happy with my new iPod.

  • NB200-125 General Hardware ( Screen and HD ) issues

    Hi All,
    My wife's NB200-125 is about 18 months old and has in the last few weeks be exhibiting some strange problems. It started out with a boot failier where windows XP failed to boot, having tried to boot in both normal mode and safe mode a few times I tried plugging it in to make sure it wasn't a battery issue, plugging it in helped and I managed to get it booted and ran chkdisk which found a bunch of Hard drive errors which it fixed and it's now booting ok, a few files were lost but that could just be chkdisk deleting HD sectors.
    Now in the last 2 days there have been 2 occasions where the screen has gone "blank" firstly to a black screen, and then the second time to a green screen.
    Does anyone have any pointers as to where to look to fix it? I thought a HD change would sort it until these screen errors.
    Any ideas would be much appreciated.

    Hi Grunge,
    Of course these problems can be hardware related but before you ask an authorized service provider you should try a recovery installation to factory settings. Maybe Windows was muddled up due to the previous issues so a reinstallation would help.
    So take the recovery medium and boot from it. Follow the screen instructions and restore out of box settings.
    If still doesnt help its really hardware related issue and it can be fixed from an authorized service provider.

Maybe you are looking for

  • Assigning a value to a substitute variable

    Hi, I would like to know if it is possible to assign a value to a substitute variable. This is what I'm doing: - Prompting user for input ACCEPT uom CHAR PROMPT 'Enter number of UOM system you would like: ' DEF '0' (displayed list of options are numb

  • SE80 third party products

    Hello, If A-X is reserved for SAP AG and Z and Y are for customers, what is the naming convention for packages over third party products (eg. SOD tool like Virsa). Is "/" (forward slash) used for these? If so, is this a must or is this just the gener

  • "Error loading native JDBC driver library" received when connecting to a DB

    I recently installed 10g client onto my PC. After installation I now recieve an "Error loading native JDBC driver library" error when attempting to connect to a database. This is a dual core Dell loaded with XP sp 2. I am attempting to connect to a 1

  • JColorChooser: how to detect color change?

    Hi all, I Know how to create a JColorChooser dialog (JColorChooser.createDialog()) to which I can add actionlistener to detect a new color has been selected. I want know if there is a way to detect events if I integrate the JColorChooser in a Panel,

  • IPhone and web galleries

    I've made several web galleries via the new iPhoto and put them on my .mac site. When I go to view the gallery from my iPhone I never get past the login window. I type the password really carefully and it just gives me a new blank login window again.