T500 XP fresh install, wireless driver won't install, help!

Hello all,
Hi all, I need some help from the techies please!!
I have had a very nasty virus (Ramnit-G) rip through my T500 which has rendered it unusable and needing a full re-install.
Now I have a legit copy of XP SP1 which is tried and tested many times on my 6 other machines so all is good.
I downloaded the ThinkVantage system update thingy as mentioned in the 4th post on this thread and also my wireless interweb driver 6mcw24ww.exe from here.
XP install all done so first job to do is get some interweb, but alas, the driver stubbornly refuses to do anything because it would like a windows installer first . So off I toddle to microsoft site and download the win installer 3.1 and install that and the interweb driver starts to install..... only to get to the final hurdle and then fail with an error box which says nothing more than "2: 0 1:" in it with an exclamation mark icon.
Can anyone help with a way round this please?
Thanks!!

Is anyone alive on this forum??
I downloaded SP3 to a USB HDD and installed that onto the T500 and now have the internet working okay, but when I try to install the Think Vantage System Update it says that it couldn't find any supported .NET Framework. So I downloaded the latest .NET Framework 4 from microsoft site and installed that, rebooted, tried again and it still says it can't find any supported framework. Is version 4 not supported then?
Please someone reply. I can't believe NO-ONE on this forum doesn't know the answer to this !
Thanks.

Similar Messages

New Intel video driver won't install

The new intel video driver won't install on my T410. Anyone else having the same problem? All I get is a Turbo Boost installation box. The intel video driver version doesn't update. I've tried manually installing via "update driver", but windows says that I already have the newest driver (even when i only have 8.15.10.2202).
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-74433
Win 7 Pro x64
T410 2516-CTO

It could be a typo.
http://download.lenovo.com/lenovo/content/ddfm/MIGR-74582.html#video
that shows what you have to be the latest.
After looking at it again it is a typo. It shows .2202 until you bring it up, then it shows .2253. I will let the admins know, ty for pointing it out.
IT Specialist and Consultant
Lenovo Tablet Evangelist
Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
Deutsche Community Comunidad en Español
Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

My new blank hard drive won't install OSX from the disk?

For some reason my Mac book pro won't install OS through the install cd or through the flash drives. It will load the disk but then freeze when I click install. It won't load through the USB either. I have done multiple diagnostics at the mac store and they tell me that my hd is bad. Twice the hd was fresh out of the box and installed that day. I spoke to a supervisor via phone when I called apple care and he told me that unless I have all apple parts in the computer they can't accurately diagnose the issue. It feels like they're trying to con me into paying double for a "apple hd". What can I do to get my computer working?

I would purchase an external USB enclosure for the HDD. With the HDD in the enclosure, install OSX and then mount in your MacBook. If you continue to have problems, it could be a faulty internal SATA cable.

No Broadcom wireless driver in net install ISO?

I downloaded the net install ISO and booted only to find that there's no driver for my wireless adapter? A NET INSTALL ISO without a driver for a very FREQUENT wireless device in a lot of laptops (Broadcom BCM4312)? Come on!
Don't get me wrong, this is not just a rant, nor a flame, I've been using Arch for a couple of months on my desktop and it's great. But, it's really disappointing to find that I can't even install it on my laptop.
Considering it's a net install image, I really think you should include network drivers for at least the more popular adapters, my Broadcom certainly isn't anything esoteric.
Last edited by yu_raider (2009-10-31 21:42:23)

There is no official Arch package for the wl driver, therfore there is no package to include on the ISO. If you want the devs to change this, post a feature request in the bugtracker - they generally don't read forum posts.
While you're waiting... you mentioned a desktop. Why not reach around the back of it, unplug the network cable, stick it into your laptop, do the net install, and the broadcom-wl install. Then unplug the cable, put it back in the desktop where it belongs.... and be happy.

Driver won't install and setup won't finish on windows 8.1 64bit

Hi
We have a HP PSC 1410 All-In-One installed on an old pc with windows 7 and the printer is working fine but I decided to move the printer and plug it in on my brand new ultra high end gaming pc with win 8.1 64bit on it for obvious reasons, because the pc is alot faster. Pc config: i5 2500k 4GHZ, 16 GB RAM, Nvidia GTX 970 4 GB, you get the picture a very fast gaming pc lol.
I downloaded the proper driver on the hp support website and started the setup and windows doesn't recognize the printer and the driver.
Everytime I uninstall and reinstall the driver I get this error:
It seems to be my even though HP claims that they have windows 8.1 driver support for my printer, it actually doesn't support it. Because I even tried to install it on my HP (the irony lol) laptop with win 8.1 on it and it doesn't work. I get the same problems and errors.
So to recap it: setup won't complete, gives me an error and then uninstalls the software by itself ....
Can anyone confirm that this specific printer model works on win 8.1? If yes, why doesn't it work on both my pc and laptop with win 8.1? Why does it only work on my old pc with win 7?
It's really a shame because the printer (even though it's very old) is still great and I like it, I just wish it would work on my new pc.
If anyone knows how to fix this or with a workaround please do share.
Regards
Elvis

Hiya @Elvis29,
First and foremost, I apologize for the delay, I have been researching what could be causing this issue, and more importantly what we can do to resolve it.
Please complete the following steps and let me know the outcome of your efforts;
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
I think in order to get the install package to install properly it would be best to unlock the admin account, then try to install again.
Let's begin with a clean boot first; How to perform a clean boot in Windows
How to Unlock Admin Account:
Open an Elevated Command Prompt in Windows 8 & 8.1 (Instructions here)
Once CMD (Command Prompt) opens, type net user administrator /active:yes and hit enter
Next, close CMD and restart your computer
When your computer comes on log into the new account that should show. It will be called Administrator and will not have a password on it.
If your computer automatically logs into your account after restart than go to your start menu click the arrow beside 'shutdown' and choose 'switch user'. Now log into the Administrator account we just unlocked
Under the Administrator account download and install the drivers using the Printer Install Wizard.
The Printer Install Wizard will by pass the Windows Installer. This runs its only installer or install shield, which will interact independent of the Windows Installer. This may allow the file that cannot be found, to be found and let the install finish. HP Printer Install Wizard for Windows
The HP Printer Install Wizard for Window was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer.
If everything installs fine, log out of this account and back into your normal user account. All the Software and Drivers for your product should show installed now on your account.
If everything works fine, you will want to Hide the Administrator account.
Go to your Start menu and under the 'search programs and files' box type CMD
CMD will populate as a search option above, just right click on it and 'run as administrator'
Once CMD (Command Prompt) opens, type net user administrator /active:no and hit enter
Next, close CMD and restart your computer
Please keep me posted.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Apple mobile device USB Driver won't install (Code 37) on my 7th Generation iPod Nano

As a result, iTunes won't detect my iPod. But the iPod will charge when I plug it in to my comp, and there is an iPod folder in "My Computer". But after installing iTunes, it no longer says “connected” on the iPod (even though it still charges it). And, in Device manager, there is a yellow exclamation mark that appears in the DVD/CD-ROM drive directly after installing iTunes – there is also a yellow mark next to “Apple mobile device USB Driver” when my iPod is plugged in. For both, it says “Code 37.” I know how to fix the DVD/CD-ROM drive problem (by deleting the filters) but the Apple driver still won't install after that. I've tried troubling shooting this. I uninstalled and reinstalled the drivers, but it hasn't made a difference. And I've uninstalled and reinstalled iTunes multiple times, too, and every time I reinstall iTunes the same thing happens: my iPod no longer says “connected on the screen,” and the DVD/CD-ROM drive gets code 37 again. Also, I tried different USB cables/ports.
Any help of suggestions would be greatly appreciated. And I think I've already read a lot of troubleshooting guides on this site, but haven't had any success so far.

Sorry, I'm confused. What do you mean by “leaving all other USB devices disconnected”? Does that include my mouse, keyboard, etc? And does that mean I uninstall those things in the device manager?

HP CM1312nfi driver won't install

Hello, I just bought a new computer with a windows 8.1 Pro version on it. I try to install the drivers but the install software won't let me. It says: "The Operatingsystem on this computer couldn't be recognised as a supported operatingsystem. This is only a warning message. The install can continue.Actual O.S. '602.64'Supported: Vista, Vista 64bit, 601.00, 601.64* Then it says:This software can't be installed using the "execute as..." The install can't continue until this issue is resolved.* Only problem, the continue button is greyed out and I'm forced to abort. I tried finding a new driver but the HP support site only proposes the universal driver. That one works fine BUT as you can imagine, no scanner possibilities. So help is most appreciated. Content of autorun.log.... CStubApp::CStubApp: Leaving
CStubApp::LaunchApplications: Entering
CIniFile::GetApplications: Entering
CIniFile::GetApplications: Leaving
Application to launch: I:\regprep.exe
Application parameters:
Wait for application to finish: 1
When to run application: 3
If we should use CreateProcess: 1
if we should check the registry: 1
CStubApp::HardWareWizardDetectProc: Entering
   CProcessModuleList::CProcessModuleList: Entering
    CPSAPI::Initialize: Entering
    CPSAPI::Initialize: Leaving
    Beginning Dump of Loaded Processes and Modules
   CProcessModuleList::CProcessModuleList: Leaving
   NTPRINT.DLL: is NOT loaded
   HOTPLUG.DLL: is NOT loaded
   HDWWIZ.CPL: is NOT loaded...........and so on *Messages are translations out of Dutch.

Hi,
Software for the printer can be downloaded from the link below.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-75052-1&cc=us&dlc=en&lc=en&...
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

15.5.6000.1657/15.5.6.48 Intel Wireless Driver - DO NOT INSTALL with Windows 8

As the title says
15.5.6000.1657/15.5.6.48 Intel Wireless driver dated 29/Jan
Don't install it - it borked my 6300 AGN had to rollback.
DangerMouse
Current Machines : T420s/W530/X1CT

Problem Solved.
This link gives a good insight into the solution
http://www.sadjad.net/blog/2012/11/28/windows-8-shared-printer-driver/

No internet, i have driver. how to install wireless driver?

I have had Arch installed on one of my three HDs for a while. I have just switched over to wireless. I bought the Asus PCE-N13 pci card. It works great on my other distro i have installed on my other HD - ubuntu (which is where I type this from).
I have the driver disk the card came with (yes, it actually supports linux). The driver is rt2860.
When I boot into my Arch HD, I am just lost as to what to do to install the driver to get my wireless working for Arch.
I'll take any tips.
Thanks,
Randy
Also, I have tried to use the Arch Wiki, but that is difficult for me personally to follow.
Last edited by rcayea (2010-03-21 18:39:29)

I can't help you with installing the driver that did come with the card.
However I notice that there is a rt2860 driver on the AUR. You could try to install it and see if it works.
To install from the AUR you need yaourt (or equivalent). If you don't have it, add following lines to the
end of /etc/pacman.conf:
[archlinuxfr]
Server = http://repo.archlinux.fr/i686
Then execute on the command line: pacman -S yaourt
And after that: yaourt -S rt2860
Just my 2 cents.
Mektub

[SOLVED] Problem with installing wireless driver (Boradcom)

Hi!
I am trying to install the driver for my wireless card: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02).
And I found this driver: www.broadcom.com/support/ethernet_nic/netlink.php, and I'm trying to follow the instructions included in the README, but when i run make, i get this:
[stian@stian tg3-3.110g]$ make
sh makeflags.sh > tg3_flags.h
grep: /include/linux/kernel.h: No such file or directory
grep: /include/linux/types.h: No such file or directory
grep: /include/linux/types.h: No such file or directory
grep: /include/linux/types.h: No such file or directory
grep: /include/linux/slab.h: No such file or directory
grep: /include/linux/delay.h: No such file or directory
grep: /include/linux/delay.h: No such file or directory
grep: /include/linux/skbuff.h: No such file or directory
grep: /include/linux/pci.h: No such file or directory
grep: /include/linux/pci.h: No such file or directory
grep: /include/linux/pci.h: No such file or directory
grep: /include/linux/pci.h: No such file or directory
grep: /include/linux/pci.h: No such file or directory
grep: /include/linux/pci.h: No such file or directory
grep: /include/linux/pci.h: No such file or directory
grep: /include/linux/pci.h: No such file or directory
grep: /include/linux/pci.h: No such file or directory
grep: /include/linux/if_ether.h: No such file or directory
grep: /include/linux/ethtool.h: No such file or directory
grep: /include/linux/ethtool.h: No such file or directory
grep: /include/linux/ethtool.h: No such file or directory
grep: /include/linux/skbuff.h: No such file or directory
grep: /include/linux/skbuff.h: No such file or directory
grep: /include/linux/ip.h: No such file or directory
grep: /include/net/ip.h: No such file or directory
grep: /include/linux/tcp.h: No such file or directory
grep: /include/linux/tcp.h: No such file or directory
grep: /include/linux/netdevice.h: No such file or directory
awk: cmd. line:1: fatal: cannot open file `/include/linux/netdevice.h' for reading (No such file or directory)
makeflags.sh: line 165: [: too many arguments
grep: /include/linux/netdevice.h: No such file or directory
grep: /include/linux/netdevice.h: No such file or directory
grep: /include/linux/netdevice.h: No such file or directory
grep: /include/linux/etherdevice.h: No such file or directory
grep: /include/linux/netdevice.h: No such file or directory
grep: /include/linux/netdevice.h: No such file or directory
grep: /include/linux/netdevice.h: No such file or directory
grep: /include/linux/if_vlan.h: No such file or directory
make -C SUBDIRS=/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g modules
make: *** SUBDIRS=/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g: No such file or directory. Stop.
make: *** [default] Error 2
What does this mean? (Yes I am very new to Arch, and Linux in general, but I want to learn!)
All help is appreciated!
Last edited by sudo make sandwich (2010-11-20 20:05:34)

Thanks for fast reply!
After I installed kernel26-headers, and tried to do 'make' again i got the following:
[stian@stian tg3-3.110g]$ make
make -C /lib/modules/2.6.35-ARCH/build SUBDIRS=/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g modules
make[1]: Entering directory `/usr/src/linux-2.6.35-ARCH'
CC [M] /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.o
In file included from /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.h:13:0,
from /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:94:
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:50:13: error: conflicting types for 'bool'
include/linux/types.h:34:17: note: previous declaration of 'bool' was here
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:56:13: error: redefinition of typedef '__le32'
include/linux/types.h:170:25: note: previous declaration of '__le32' was here
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:57:13: error: redefinition of typedef '__be32'
include/linux/types.h:171:25: note: previous declaration of '__be32' was here
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:61:23: error: conflicting types for 'resource_size_t'
include/linux/types.h:188:21: note: previous declaration of 'resource_size_t' was here
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:86:21: error: conflicting types for 'kzalloc'
include/linux/slab.h:319:21: note: previous definition of 'kzalloc' was here
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:109:28: error: static declaration of 'jiffies_to_usecs' follows non-static declaration
include/linux/jiffies.h:297:21: note: previous declaration of 'jiffies_to_usecs' was here
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:122:22: error: static declaration of 'usecs_to_jiffies' follows non-static declaration
include/linux/jiffies.h:299:22: note: previous declaration of 'usecs_to_jiffies' was here
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:137:22: error: static declaration of 'msecs_to_jiffies' follows non-static declaration
include/linux/jiffies.h:298:22: note: previous declaration of 'msecs_to_jiffies' was here
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:173:13: error: static declaration of 'msleep' follows non-static declaration
include/linux/delay.h:46:6: note: previous declaration of 'msleep' was here
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:185:22: error: static declaration of 'msleep_interruptible' follows non-static declaration
include/linux/delay.h:47:15: note: previous declaration of 'msleep_interruptible' was here
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:242:22: error: static declaration of 'pci_ioremap_bar' follows non-static declaration
include/linux/pci.h:1373:15: note: previous declaration of 'pci_ioremap_bar' was here
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:504:0: warning: "dma_unmap_addr" redefined
include/linux/dma-mapping.h:221:0: note: this is the location of the previous definition
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:508:0: warning: "dma_unmap_addr_set" redefined
include/linux/dma-mapping.h:222:0: note: this is the location of the previous definition
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:512:27: error: static declaration of 'pci_choose_state' follows non-static declaration
include/linux/pci.h:810:13: note: previous declaration of 'pci_choose_state' was here
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h: In function 'pci_choose_state':
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:515:2: error: incompatible types when returning type 'pm_message_t' but 'pci_power_t' was expected
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h: At top level:
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:520:13: error: conflicting types for 'pci_pme_capable'
include/linux/pci.h:811:6: note: previous declaration of 'pci_pme_capable' was here
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:539:12: error: conflicting types for 'pci_enable_wake'
include/linux/pci.h:821:19: note: previous definition of 'pci_enable_wake' was here
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:565:12: error: static declaration of 'pci_set_power_state' follows non-static declaration
include/linux/pci.h:809:5: note: previous declaration of 'pci_set_power_state' was here
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:638:19: error: static declaration of 'pcie_set_readrq' follows non-static declaration
include/linux/pci.h:791:5: note: previous declaration of 'pcie_set_readrq' was here
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:678:1: error: conflicting types for 'pci_read_vpd'
include/linux/pci.h:838:9: note: previous declaration of 'pci_read_vpd' was here
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:933:19: error: redefinition of 'skb_transport_offset'
include/linux/skbuff.h:1366:19: note: previous definition of 'skb_transport_offset' was here
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h: In function 'skb_transport_offset':
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:935:19: error: 'const struct sk_buff' has no member named 'h'
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h: At top level:
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:940:29: error: redefinition of 'ip_hdr'
include/linux/ip.h:110:29: note: previous definition of 'ip_hdr' was here
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h: In function 'ip_hdr':
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:942:12: error: 'const struct sk_buff' has no member named 'nh'
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h: At top level:
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:947:28: error: redefinition of 'ip_hdrlen'
include/net/ip.h:47:28: note: previous definition of 'ip_hdrlen' was here
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:954:30: error: redefinition of 'tcp_hdr'
include/linux/tcp.h:213:30: note: previous definition of 'tcp_hdr' was here
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h: In function 'tcp_hdr':
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:956:12: error: 'const struct sk_buff' has no member named 'h'
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h: At top level:
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:961:28: error: redefinition of 'tcp_optlen'
include/linux/tcp.h:223:28: note: previous definition of 'tcp_optlen' was here
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:1193:20: error: redefinition of 'skb_copy_from_linear_data'
include/linux/skbuff.h:1864:20: note: previous definition of 'skb_copy_from_linear_data' was here
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:1202:13: error: redefinition of typedef 'netdev_tx_t'
include/linux/netdevice.h:111:24: note: previous declaration of 'netdev_tx_t' was here
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:1263:20: error: redefinition of 'netif_tx_lock'
include/linux/netdevice.h:1944:20: note: previous definition of 'netif_tx_lock' was here
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h: In function 'netif_tx_lock':
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:1265:16: error: 'struct net_device' has no member named 'xmit_lock'
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:1266:5: error: 'struct net_device' has no member named 'xmit_lock_owner'
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h: At top level:
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:1269:20: error: redefinition of 'netif_tx_unlock'
include/linux/netdevice.h:1972:20: note: previous definition of 'netif_tx_unlock' was here
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h: In function 'netif_tx_unlock':
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:1271:5: error: 'struct net_device' has no member named 'xmit_lock_owner'
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:1272:18: error: 'struct net_device' has no member named 'xmit_lock'
In file included from /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.h:13:0,
from /home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:94:
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h: At top level:
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:1393:8: error: redefinition of 'struct netdev_hw_addr'
include/linux/netdevice.h:222:8: note: originally defined here
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:1397:0: warning: "netdev_for_each_mc_addr" redefined
include/linux/netdevice.h:254:0: note: this is the location of the previous definition
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:1489:11: error: redefinition of 'mii_resolve_flowctrl_fdx'
include/linux/mii.h:265:18: note: previous definition of 'mii_resolve_flowctrl_fdx' was here
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c: In function 'tg3_napi_disable':
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:806:2: error: implicit declaration of function 'netif_poll_disable'
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c: In function 'tg3_napi_enable':
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:818:2: error: implicit declaration of function 'netif_poll_enable'
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c: In function 'tg3_tx':
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:4773:6: error: implicit declaration of function 'dma_unmap_addr'
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:4773:25: error: 'mapping' undeclared (first use in this function)
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:4773:25: note: each undeclared identifier is reported only once for each function it appears in
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c: In function 'tg3_rx_skb_free':
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:4825:48: error: 'mapping' undeclared (first use in this function)
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c: In function 'tg3_alloc_rx_skb':
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:4891:2: error: implicit declaration of function 'dma_unmap_addr_set'
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c: In function 'tg3_recycle_rx':
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:4936:31: error: 'mapping' undeclared (first use in this function)
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c: In function 'tg3_rx':
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:5007:34: error: 'mapping' undeclared (first use in this function)
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:5175:4: error: implicit declaration of function 'netif_rx_schedule'
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c: In function 'tg3_poll':
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:5502:4: error: implicit declaration of function 'netif_rx_complete'
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:5516:27: error: 'struct net_device' has no member named 'quota'
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:5517:24: error: 'struct net_device' has no member named 'quota'
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:5522:9: error: 'struct net_device' has no member named 'quota'
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c: In function 'tigon3_dma_hwbug_workaround':
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:5993:7: error: 'mapping' undeclared (first use in this function)
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c: In function 'tg3_free_rings':
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:6782:27: error: 'mapping' undeclared (first use in this function)
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c: In function '__tg3_set_rx_mode':
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:9885:3: error: 'struct net_device' has no member named 'mc_list'
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:9885:3: error: dereferencing pointer to incomplete type
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:9885:3: error: dereferencing pointer to incomplete type
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c: In function 'tg3_run_loopback':
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:11373:55: error: 'mapping' undeclared (first use in this function)
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c: In function 'tg3_init_one':
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:15363:5: error: 'struct net_device' has no member named 'poll'
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c:15364:5: error: 'struct net_device' has no member named 'weight'
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c: In function 'pci_choose_state':
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:516:1: warning: control reaches end of non-void function
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c: In function 'ip_hdr':
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:943:1: warning: control reaches end of non-void function
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.c: In function 'tcp_hdr':
/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3_compat.h:957:1: warning: control reaches end of non-void function
make[2]: *** [/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g/tg3.o] Error 1
make[1]: *** [_module_/home/stian/Desktop/Downloads/Server/Linux/Driver/tg3-3.110g] Error 2
make[1]: Leaving directory `/usr/src/linux-2.6.35-ARCH'
make: *** [default] Error 2
Leaves me blank :S

Realtek wireless driver will not install on Satellite P855-S5200

I had to reload win 7 home premium from scratch. Everything but the wireless driver will install. The LAN Driver is a Realtek so I am assuming the WLAN is a Realtek also. I have tried each of the drivers listed in the download section with no success.
Can someone point me in the right direction to fix this?
Thanks!!!

No , ! on the detailed specs of the NB you need to get the Intel wireless drivers .
Checked there the communications : http://support.toshiba.com/support/staticContentDetail?contentId=3426318&isFromTOCLink=false
(Everyone was new at one point)
You wanna say thanks ?? click the white star on the right side >>>

Optical drive won't install programs from CDs

I have a S300-EZ2501. I downgraded my installation from Vista Business to XP Pro.
My drive has stopped installing programs that come on CDs. I did not have this problem while loading all my software onto the laptop. Now, however, when I insert an installation CD into the drive, it attempts to read the CD, but cannot initialize the Autorun file, so nothing happens. I've tried running the install from the Run line, or by browsing to the file, but that does not work either. I also tried deleting the device from my system and reinstalling; that didn't work either.
Are there any registry settings for the optical drive that I can check? I want to make sure that the system is pointing to the correct location.
Thank you.
Barry L. Lippitt

I tried to restore to earlier settings, but that did not help.
If I try to doubleclick on the executable file on the CD, the hard drive light goes on, but not the external drive light.
I'm starting to think this is a WindowsXP problem and not a drive problem. I copied the contents of one of the program CDs to my hard drive, and tried installing from that directory. When I double-click on the Setup.exe file, there is sporadic hard drive flashing light, but nothing happens. The programs install from .exe files and not .msi files, so its not a Windows Installer problem. What other settings can I check that affect running setup programs on the laptop?
As I'm typing this, all of a sudden the executable program screen appeared on the laptop (after about 10 minutes). Maybe it will install, but that's a very long time before it happens.
Nothing more happened (10 more minutes). When I closed the screens fromy my toolbar, I received a popup telling me that I am ending the "nonresponsive program 32-bit Setup Launcher." I think there is a problem with this file; when I tried to install other programs (16-bit, from earlier versions) and had to close them down, I received messages that the 16-bit system was unstable.
Is there a way to repair these files on my laptop? What might have destabilized them?
As a reminder back to the beginning of this thread, my laptop came with Vista Business installed, but I downgraded from the restore CD to WinXP Pro.

New hard drive won't install

I am trying to install a harddrive into the second bay of my 2005 Power Mac G5.
The drive I'm installing is a Western Digital Caviar black 2TB. It is and SATA drive and the same one has installed successfully on my newer G5 tower.
I plug the drive in, start up the computer - and it doesn't show up. The computer can't find the drive, not even through the disc utility.
I know the bay works since it held a smaller, older drive before that also shows up if I put it back.
Is the drive too new or large for this older computer to recognize it? I'm definitely at my wits end.....

G5s will take up to 2.2 TB drives no problem, I think you need a Jumper on Pins 5&6 to slow it ti SATA 1 speeds.
http://www.fatwallet.com/static/attachments/12634_western_digital_sata_jumpers.j pg

E51 Driver won't install after XP reinstall

I have been using my E51 with PC Suite 6.86.9.3 on XPSP2 for several months and all was fine. I had need to reinstall XP using the "Upgrade" option - i.e. keeping all your applications and settings.
After the reinstall, the E51 will not load. It says:
"Nokia E51 USB Phone Parent - An error occurred during the installation of this device - Fatal error duing installation"
I have, of course, removed all the drivers by hand (wdfcoinstaller01005.dll nmwcdcocls.dll, ccdcmd.sys etc), cleaned the registry, rebooted, uninstalled and reinstalled PC Suite, located the correct inf file (oem31.inf in my case), tried automatic driver install, manual driver install etc etc and after several hours work trying various combinations of the above, still the same message whenever I update the driver for the phone.
Has anyone had this before? I don't want to do a clean install of XP and reinstall all my apps, but I might have to.

Fixed - this message helps!
/discussions/board/message?board.id=connectivity&thread.id=16751
Thanks to freespirit62 and USB Phone Parent error.

G60-audio drives won't install

have tried to install drivers for audio on G60-519wm they won't install any help. running win 7 home premium 32 bit
3 gb ram

Hi Stu
The original recovery media can be ordered by authorized Toshiba service partner in your country. If you want to find out more contact them. Addresses you can find under http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true
By usage of Microsoft full version installations CD you can download all necessary drivers, tools and utilities from Toshiba download site. There are no download limits and all stuff on download page is for everyone.
Toshiba policy is that you buy unit and OS with valid license. Toshiba dont force nobody to use just delivered OS. You can do what you want and install your favorite OS (if delivered with Home you can install Pro version). Because of that all drivers are on download page.

T500 XP fresh install, wireless driver won't install, help!

Similar Messages

Maybe you are looking for