T60p Bluetooth Problems with Windows 7 Ultimate 32 Bit

Hi
I installed Windows 7 Ultimate 32 Bit (MSDN) on my T60p but in the device Manger are every Bluetooth entry yellow marked.
Can anyone help me?
regards
Coolskin

Hi pjg and coolskin!
The T60p:is not supported by the driver pjg linked to (see the release notes for it).
The latest Vista version for the T60p is here:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67250
As a community members pointed out, the download link on this page was broken. It was reported through the Lenovo Site Feedback page, and fixed. I find that site errors reported this way are usually fixed within 24 hours.
pjg wrote:
I recommend that you install the last reliable Bluetooth stack for Vista. For some reason, Lenovo has removed it but you can download it
I don't work for Lenovo. I'm a crazy volunteer!

Similar Messages

ITunes not compatible with iPod Touch 4th gen (problem with Windows 64 bit)

So I've been trying for about a month or so to sync my iPod Touch to iTunes but ever since i updated it to iTunes 11 it has been saying that i need to uninstall it and install the 64 bit version. I've done that twice this week alone and its still not working, saying again that i need the 64 bit which I already have. I've ended up completely erasing previous iTunes data to see if that would help, but that just ended up being more hassle. I don't think its just my iPod, because it refuses to sync my iPad 2 manually as well.
Please help me, i'm at my wits end.

You are very perceptive - has nothing to do with your ipod, has to do with your Windows. You can try couple things.
One - reinstall itunes "apple way" and when downloading disable your anitvirus.
http://support.apple.com/kb/HT1923
please make sure that you completed not only step one, but also step two.
Then disable your antivirus and go to step three.
iTunes 11.0.5 for Windows 64 - Apple - Support
if that does not work go to thing number two.
Two - come back here with precise text of the message, see if anybody had it before.

MSComDlg.ICommonDialog Problem with Windows 64-bit system

Hi all!
I try to use the common Windows dialog box for saving files. For this I'm using the ActiveX-class "MSComDlg.ICommonDialog" with the propertynode input "Filter" for the file types. It's the standard "SaveAsType.vi" (somewhere in the forum).
Everything works fine on a 32-bit Windows system. But when I run the code on a 64-bit system I can not save my file with the last file-extension in the box field. I always get a error-message: "The file name is invalid!" This happens only when the last box-element is selected. All other run normal.
So for example:
If may box array is
Matlab Files (*.mat)|*.mat
Text Files (*.txt)|*.txt
Excel Files (*.xls)|*.xls
and I select to save as *.xls and write as filename "Hello" in, I get on the 64-bit machine the error:
"Hello
The file name is invalid"
When I change the order of the box array *.xls will go but the new last element will produce this error.
So, can someone help me?
Kind regards,
llpauli
P.S. I'm using Win 7 64bit with labview 9 32bit. exe tested on win7 64 bit and win xp 32 bit.

Hi
Im using win 7 64bit. I'm able to register the comdlg32.ocx now but can't use it in labview. There are always error messages.
Which one do you use (see screenshots)
Regards
DianaS
Attachments:
comdlg1.gif ‏38 KB
comdlg2.gif ‏37 KB

IPhone 3GS SYnc problems with Windows 7 64 Bit

I am having sync problems with windows 7 64 Bit.
The iPhone syncs a few tracks then hangs, a few minutes later itunes tells me the iphone has timed out.
Anyone have any ideas about this. I have tried different USB ports, cleaned the apple USB cable contacts with Servisol, restored the iPhone and reinstalled itunes.
iPhone and iTunes are latest versions.
Thanks
Joe

"Try this connect the iPhone, let the mtp driver installation fail, then go into the device manager and uninstall the unknown mtp device. If you then scan for new hardware from the device manager it should recognize the iPhone & update the driver."
Ok here's what I did:
1) Connect the iPhone (iTunes had been installed)
2) No MTP driver installation is happening as Windows detects iPhone successfully
3) Open Device Manager
4) There seems to be 2 drivers for iPhone that are active now, although I still can't see which one is the MPT driver you're referring to.
One of them sits under Portable Devices: "Apple iPhone". If I view the details of this driver, it lists the following files:
- C:\Windows\system32\DRIVERS\UMDF\WpdMtpDr.dll
- C:\Windows\system32\DRIVERS\winusb.sys
- C:\Windows\system32\DRIVERS\WUDFRd.sys
- C:\Windows\system32\WpdMtp.dll
- C:\Windows\system32\WpdMtpUS.dll
The other one sits under Universal Serial Bus controllers: "Apple Mobile Device USB Driver". And as indicated by Joe above, it lists the following files when I view the Details:
- C:\Windows\system32\Drivers\usbaapl64.sys
- C:\Windows\system32\usbaaplrc.dll

Problems with Windows Vista and Speedster 945GT?

Hi!
I've been trying to install Windows Vista on my Speedster 945GT-based system for some time now, but I am unable to get it to run stable.
It hangs on random occasions when installing and if one is lucky it's gets thru the install but then it hangs at the desktop in Vista.
I'm using the latest BIOS version out (1.2) and a Core2Duo T7600 CPU.
I have even tried other CPU's to rule out CPU error with the same results. Same goes with different sticks of memory.
Does anyone have a sollution to this problem?
Btw, it works fine when Windows XP is installed.
Best regards
Johan

I had similar problems with Vista 32-bit (Ultimate). I got the board with BIOS v1.0, while I also purchased a T7200 Dual 2 Core. This did not work at all. MSI Netherlands was kind enough to flash the BIOS for me with v1.2 so I could get things working. However, I was not too lucky with Vista. Could just get to the boot screen, but then it hung.
BIOS v1.3 did the trick. I have things working now, but the onboard video is a disaster. Windows Update installed new chipset drivers but this did not help. Intel Graphics drivers did also not improve things.
I started with an analog connection to my 1280x1024 Philips 170B2. Worked ok, but could not get the system working in a higher resolution than 1024x768 which is obviously not preferred. At that time, the DVI connector of my monitor was in use by another system, soon to be replaced by this one.
Instead of worrying about the resolution on the analog connection I thought it was time to hook my monitor up via DVI. And then things started to get even worse.
The POST is visible, you can see Windows starting but then there is a black screen. Windows is fully loading, I can hear through the speakers. I can even login, but still no screen.
So I went back to analog VGA and guess what - same issue with analog VGA now!
System works 'fine' in Safe Mode, but even the 640x480 boot option does not help.
My temp solution now is to use my 7600GS, but as the onboard video might be good enough for me (if it works), I would prefer to get things working.

Hi anyone having a problem with windows 7 and itunes

Hi has anyone had a problem with windows 7n and Itunes...My Itunes was working now wont open says files missing reinstall...which I have done several times also other programs that were working now have error message your side by side configuration isnt correct any ideas!!!

Yes, I am also having trouble with my windows 7n. I tried to install the download but it didn't have 32 bit for my computer and I don't think it will help me see my phone on my external devices. I can't transfer my photos. Any help would be appreciated.

Problem with Windows 8.1 and Corseca Byte BT headset

I recently bought a Corseca Byte bluetooth headset.
The headset works fine with phones.
Initially when connected to the laptop running windows 8.1 it works well and continues to flawlessly for hours.
The problem is when the headset is connected to the laptop but there is no audio streaming (e.g paused a movie playback for attending some other job) and resume playback after 10-15 minutes the audio starts stuttering/ becomes choppy. If I switch off the headset
and restart it works fine unless it lays unused for some time.
Windows recognizes the device correctly. I've turned off power management for BT devices and tried to update the drivers without any positive result.
Initially I thought the headset was defective but since it works flawlessly with phones I think it is a problem with Windows 8.1.
How to solve the issue?

Hi,
Have you also tried to disable power management on wireless network connection adapter? Since some OEM computers also combine some features of Bluetooth to wireless network connection adapter.
This issue can be mostly caused by drivers. Please contact the menufacturer's to see if the latest driver is compatible with Windows 8.1.
If not, I suggest you find the driver for Windows 8 /7 and install it in compatible mode in Windows 8.1 to see what's going on.
Also, post back the C:\Windows\Inf\setupapi.dev.log and event log you can find in event viewer related to this issue here for our research.
Kate Li
TechNet Community Support

Problems with Windows 7 home premium and ovi

Excuse me for my english.
I've a big problem with Windows 7 and NOKIA N97 32G
I install the latest version of Nokia Ovi Suite 2.0.2.42. When I connect the phone with USB and select PC suite mode in the phone, OVI don't see the phone and say method not compatible.
I can't synchronize the phone.
Help me.
Thanks

I just want to say that many Nokia Ovi Suite problems have showed up for me recently. I tried everything (including many reinstalls, cleans, etc.) and nothing helped.
Finally I found the solution:
I realized that I have installed Service Pack 1 on Windows 7 (32-bit), and this stopped Ovi Suite from working correctly. The solution is to run Ovi Suite in compatibility mode as "Windows 7"
(You may be surprised to run an application in "Windows 7" compatibility mode on Windows 7. But after installing Service Pack, it is no longer "Windows 7" but it is now "Windows 7 SP1"! This is different. So "Windows 7" is the old mode without the service pack, and in this old mode Ovi Suite works.)
Concluding: After installing Service Pack 1 just use compatibility mode as "Windows 7" to run Ovi Suite, and this program should work OK (at least for me it works on a 32-bit OS).
PS. My version of Ovi Suite is 3.0.0.290

HP 250 G3 - problems with Windows 10 boot

I have problems with Windows 10 boot on my HP 250 G3. It often shutdown during boot. But boot is ok with Windows 8.1. Please release upgrade that solve this problem.

SomeoneWithAnHP wrote:
Guys this might be solution: Turn off your laptop. Disconnect all devices connected to the PC. Remove battery and disconnect from wall. Press the power button at least 20 seconds. Connect back battery and turn on your PC. It should be fixed by now, I did with my Pavilion 14, and both sleep and turning off problems were fixed.re: Black Screen and Dead keyboard after locking computer. I tried this with my Envy 17t-3200 3D CTO. Didn't help. for this computer this means removing the back cover and unplugging the battery wiring harness form the Motherboard. I currently have sleep mode disabled when on AC and am still getting the black screen, dead keyboard lockup. I really know I'm hosed since even the caps-lock is non-functional. I see this problem more when I'm at work were I tend to Win-L lock the screen when I walk away from my desk. Seems like locking the computer then letting the screen blank is doing something evil. After I force a reboot, by keyboard backlight forgets it's setitngs and returns to full brightness. If I lock the screen then bring back the computer before the screen is blanked, it seems fine. I don't think there's any way to adjust the screen blanking when the lock screen is up (even my desktop power-saves the monitors after a few minutes on the Lock screen). I'm not sure it's HP or MS that should be looking into this. My computer is about 3 years old so I can't pester HP with warranty requests. I'm not sure how prevelant this problem is. Are all Pavellions and Envy's having the problem? Mine has Radeon graphics which was a bit unusual at the time. I have to install the HP Display driver before any AMD updates or the screen dimming doesn't work (at least with win 7 and 8). Dave.

Bluetooth compatibility with Windows on iMac?

My wireless Apple keyboard and Mighty Mouse work great under Tiger OS. When I first went into Windows, I plugged in the wired keyboard and mouse and registered both Bluetooth devices under Windows, and they worked fine. The wired items went back to storage.
When I close Windows, go to Tiger, everything still works fine but when I go back to Windows the wireless devices have lost their registration. I've re-set them up several times but it happens every time. Anyone have a suggested way to register the bluetooth devices with Windows so they will stay registered?
Thanks!

My wireless Apple keyboard and Mighty Mouse work
great under Tiger OS. When I first went into
Windows, I plugged in the wired keyboard and mouse
and registered both Bluetooth devices under Windows,
and they worked fine. The wired items went back to
storage.
When I close Windows, go to Tiger, everything still
works fine but when I go back to Windows the wireless
devices have lost their registration. I've re-set
them up several times but it happens every time.
Anyone have a suggested way to register the
bluetooth devices with Windows so they will stay
registered?
Thanks!
Currently, the Apple Bluetooth Radio does not work well in Windows. There is just some sort of incompatibility which keeps Windows from keeping Apple (or Microsoft, for that matter) Bluetooth devices registered in Windows. The same is true if you use Microsoft Bluetooth devices in OS X.
I have the same problems using my Microsoft Bluetooth Desktop set with my Intel iMac in Windows or OS X.
The Apple hardware and software just is not very compatible with Windows, nor is the Windows hardware very compatible with its own software or with OS X.
I guess we will just have to wait until both Microsoft and Apple improve cross-platform compatibility.
Sorry, but I have no answer for you other than that. They just don't work as they should right now.

How to fix the Bluetooth problems with the Treo

It’s pretty obvious by now that Palm had not intentions of addressing the Bluetooth problems with the Treo smart phones. As for me, I need to reset my Treo 700wx several times a day to keep the bluetooth connection working. At my house it simply does not work because I live in a rural area where my cell signal drops out continuously, only for a moment but that’s all it takes for the Treo loose the Bluetooth connection.
I’ve searched here on this board for a solution only to find out that I’m not the only one with this problem. I’ve searched the Internet and could not believe the endless complaints about this problem, not a single fix was to be found. I will be going to every single site I can find on the Internet where I can leave a review of this product and I would encourage others with the same problem to do the same.
Post relates to: Treo 700wx (Verizon)
Post relates to: Treo 700wx (Verizon)

The "Mobile Device" you see only shows what is on your Treo when ActiveSync is running and connected. When it's not connected, there is "nothing". This is good when you want to copy a file you have saved in RAM (main memory). Connect your Treo and have Activesync run (successfully, of course). Then, you will see all the accessible files on your Treo.
Please read the previous reply (I have added and edited it to respond to some of your questions). Also, since I have the Card Export 3.14 for the WM5 and 6 running and it works on my Treo 750, I believe it should also work for you. I have WM 6. Earlier versions of Card Export actually "broke" Activesync for me. It wasn't until very recently that I wanted to try it again, in hopes that they have fixed the bugs. Apparently they have and I now use it to "fix" Activesync when it doesn't want to connect.
So, the latest version is 3.14 and it supports WM 5 and 6 (although they incorrectly named it Windows Mobile 2005/2006).
Post relates to: Treo 650 (Rogers)

Problem with windows installer

problem with windows installer. cannot download 10.5

It is from trying to use 64-bit versions on Macs that have old out of date EFI32 and don't support Windows 64-bit.
Select CD-ROM Boot Type Error...: Apple Support Communities
CD-ROM Boot Type when installing
Vista 64-bit Macbook 2008
You have to either use 32-bit version or modify the DVD which means making a new ISO and reburning with changes, usually using Windows in a VM.

Problem with windows and my monitor in after effects

HI . before any thing excuse me for speeking english.
i have a problem with windows in after effect in my monitor
my monitor is 15.6 and resolution is 1366*768
for example when i open interpret footage window i can't see that complete and amount of size window dont visible.
Thanks.

Your system doesn't meet the requirements and that is that. AE has required 900 pixel height ever since CS4. Other than changing your screen res or shuffling around windows there is nothing you can do.
Mylenium

Problems with Windows XP SP3 in Boot Camp

Hi,
I have recently received a 21.5" iMac; it is the higher-end of the 21.5" standard configurations. The problems I am having, I believe, specifically relate to drivers.
Firstly, I get no sound whatsoever in Windows XP SP3 (boot camp); I have tried removing and reinstalling the drivers from the Snow Leopard install disc, but no success. I have no yellow question marks in the device manager window, but the absence of audio still persists.
Secondly, I cannot gain access to the special functions of the Apple wireless keyboard in Windows XP SP3 via Boot Camp. Again, I have tried reinstalling the drivers, but no success. I have read an Apple support document which states that the keys are only supported on late 2009 Macs; I own one of these Macs, so that cannot be the problem.

Problems with Windows XP SP3 in Boot Camp
Boot Camp forums are here: http://discussions.apple.com/category.jspa?categoryID=237

I am having a problem with Windows Fusion installed on a MacBook.

I am having a problem with Windows Fusion installed on a MacBook OS 10. When attempting to use a Browser, (either IE, or Chrome), under Windows Fusion, I cannot browse to ANY page except Gmail.com.
I checked all security settings, and found no problem. Neither browser will allow me to do ANYTHING other than go to Gmail.com!!!
I am not sure if I have some virus on my Windows side, because Google and Safari both work perfectly on my Apple side, just not when running Windows Fusion.
Is there some setting I am missing, or do you think I have malware/virus issues?? My Internet connection is DEFINITELY working fine - I can send, receive, open, and close all my email on Gmail only, and can navigate freely on Gmail, but cannot get to any other site even hyperlinked to Gmail.
Any help would be greatly appreciated.
Thank you very much.

HartEJ wrote:
...Neither browser will allow me to do ANYTHING other than go to Gmail.com!!!...
If you've already tried my previous suggestions, it may be that something has tampered with the DNS settings in your Windows VM, which might bypass the settings your Mac uses. Assuming you're using Windows 8, these instructions explain how to check and change the DNS settings. There's also a link in those instructions listing a variety of suggested DNS settings. If you do try changing the settings, record what the settings currently are in case you want to return to them.

T60p Bluetooth Problems with Windows 7 Ultimate 32 Bit

Similar Messages

Maybe you are looking for