Table control in report selection screen

I have a selection screen with some fields. Now, below these fields, I need a table control in which i will have input parameters with 3 fields so that i can enter data in combinations and use the same while executing the report like an internal table.
1. I should be able to save it as a Variants.
2. I should be able to schedule a background job.
I found similar notes but they dont help me save variants and with job schedules.
Request your help in this regard.
Regards
Kasi

Hi
In the selection-screen u can generated a tabstrip:
SELECTION-SCREEN BEGIN OF TABBED BLOCK MAX FOR 22 LINES.
SELECTION-SCREEN TAB (25) TABS1 USER-COMMAND UCOMM1
DEFAULT SCREEN 100.
SELECTION-SCREEN END OF BLOCK MAX.
So the system'll generate a tabstrip in the selection-screen, here it'll load only the screen 100.
By screen painter u have to create a subscreen 100 where u insert your table control.
Max

Similar Messages

About table control in the selection screen

i want to create a table control in the selection screen of my report.i can create the table control using SE51.but how to program with the table control in the report.for example i should fetch the data for the personnel nos entered in the table control of the selection screen.how to do this.can any of u provide sample code for this.
thanks.

Hi vadivel,
Create internal table and create table control using same internal table
e.g.
data : begin of it,
end of it.
start-of-selection.
call screen 100.
If you create table control using wizard then code automatically come here.
Now, Put one push button in same screen where table control is available. let's say push button Display report.
Now, use export <IT> to memory id <ID> and submit report <report name> and return. now, define same internal table in this submitted report and use import <IT> from memory id <ID>. Now, table control data is available in internal table, use that data and make code as per your requirement. If you dont want to use push button then use menu bar and at user-command event.
Hope this help
Regards,
Parag

Table control and a selection screen

Hi,
I have a requirement where I am supposed to be designing a screen that has a table control with fields
w/selection column       label 1(non-editable)          i/o field(from)        i/o field(to)
w/selection column       label 2(non-editable)          i/o field(from)        i/o field(to)
On searching the forum threads, I found related threads as to how to implement a selection screen (as the I/O fields are similar to select-options) in module pool programming. But mine requires the use of table control and a kind of selection screen embedded into it. Please guide me through this requirement.

Hi
If you need to implement a table control on selection screen u need to use a tabstrip as graphic element supports the table control.
So
1 - Step: define a tabstrip with 1 tab only:
SELECTION-SCREEN BEGIN OF BLOCK 3.
SELECTION-SCREEN BEGIN OF TABBED BLOCK MAX FOR 22 LINES.
SELECTION-SCREEN TAB (25) TABS1 USER-COMMAND UCOMM1
         DEFAULT SCREEN 100.
SELECTION-SCREEN END OF BLOCK MAX.
SELECTION-SCREEN END OF BLOCK 3.
2 - Step design the subscreen (in my sample the dynrpo 100) and insert the table control there:
PROCESS BEFORE OUTPUT.
MODULE INIT_CTRL.
LOOP WITH CONTROL T_CTRL.
    MODULE DISPLAY_DATA.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP WITH CONTROL T_CTRL.
      MODULE UPDATE_DATA.
ENDLOOP.
In the module DISPLAY_DATA and UPDATE_DATA u need to implement the code to transfer the data from internal table to table control and from table control to internal table, in order to display and update the data.
Max

Table control on Tabbed selection-screen

Hi All,
My Requirement is: I have a tabbed selection-screen with 3 tabs.
On one of the tabs I have to include a Table control.
Currently I'm displaying Table control as Pop-up . But I want that on the screen itself.
Please suggest me how to do this.

Once i have done this. but only table control was there on the screen.
design a screen and place one table control.
y will declare one default subscreen in the selection screen tab declaration,
and
At selection-screen.
change the value of the deflaut screen to ur designed screen.
below is one example
controls: tab type tableview using screen 201.
SELECTION-SCREEN BEGIN OF TABBED BLOCK object FOR 50 LINES.
SELECTION-SCREEN TAB (60) tab_cls USER-COMMAND ut_cls
                      DEFAULT SCREEN 101.
SELECTION-SCREEN TAB (60) tab_rcp USER-COMMAND ut_rcp
                      DEFAULT SCREEN 200.
SELECTION-SCREEN END OF BLOCK object.
SELECTION-SCREEN BEGIN OF SCREEN 0101 AS SUBSCREEN NESTING LEVEL 2.
parameters: P_lifnr type lfa1-lifnr.
SELECTION-SCREEN END OF SCREEN 0101.
SELECTION-SCREEN BEGIN OF SCREEN 0200 AS SUBSCREEN NESTING LEVEL 2.
parameters: p_ebele type ekko-ebeln.
SELECTION-SCREEN END OF SCREEN 0200.
AT SELECTION-SCREEN.
CASE sy-dynnr.
    WHEN 1000.
      CASE sy-ucomm.
        WHEN 'PUSH1'.
          object-dynnr = 100.
        WHEN 'UT_RCP'.
          object-dynnr = 201.
        WHEN OTHERS.
      ENDCASE.
here the defualt screen is 200 but for table control purpose i changed it to 201 which has the table control in it.

Table control in report program

Hi all...
Please help me to create a table control in my report program. my requirement is to enable the user to enter two fields (company code and cost center) on the selection screen. I wish to do this using table control..
example codes will be extremely helpful..
Thanks in advance..
-Pranati.

Hi,
We can not do the Table control on the selection screen, but we can do the Tab strip control.
To define a tabstrip area with tab pages, use the following statements in your selection screen definition:
SELECTION-SCREEN: BEGIN OF TABBED BLOCK <tab_area> FOR <n> LINES,
                  TAB (<len>) <tab1> USER-COMMAND <ucom1>
                              [DEFAULT [PROGRAM <prog>] SCREEN <scrn>],
                  TAB (<len>) <tab2> USER-COMMAND <ucom2>
                              [DEFAULT [PROGRAM <prog>] SCREEN <scrn>],
                  END OF BLOCK <tab_area>.
See the below SAP link for the sample programs
http://help.sap.com/saphelp_46c/helpdata/EN/00/deb23789e95378e10000009b38f8cf/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/e7/deb237b9a9a968e10000009b38f8cf/content.htm
See the example code
REPORT   znr1 NO STANDARD PAGE HEADING
            LINE-SIZE 80 LINE-COUNT 60.
TABLES : sscrfields.
DATA activetab(6) TYPE c .
DATA mat_des TYPE makt-maktx.
DATA pl_des TYPE t001w-name1 .
SELECTION-SCREEN BEGIN OF SCREEN 001 AS SUBSCREEN NO INTERVALS.
SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME TITLE text-002 NO
INTERVALS.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 14(18) text-002 FOR FIELD matnr.
PARAMETERS matnr TYPE mara-matnr.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK block1.
SELECTION-SCREEN END OF SCREEN 001.
SELECTION-SCREEN BEGIN OF SCREEN 002 AS SUBSCREEN NO INTERVALS.
SELECTION-SCREEN BEGIN OF BLOCK block2 WITH FRAME TITLE text-003 NO
INTERVALS.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 14(18) text-003 FOR FIELD matnr.
PARAMETERS werks TYPE t001w-werks.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK block2.
SELECTION-SCREEN END OF SCREEN 002.
SELECTION-SCREEN BEGIN OF TABBED BLOCK tabb1 FOR 5 LINES NO INTERVALS.
SELECTION-SCREEN TAB (15) tabs1 USER-COMMAND ucomm1
                     DEFAULT SCREEN 001.
SELECTION-SCREEN TAB (15) tabs2 USER-COMMAND ucomm2.
*                     DEFAULT SCREEN 002   .
SELECTION-SCREEN END OF BLOCK tabb1.
INITIALIZATION.
tabs1 = text-002.
tabs2 = text-003.
activetab = 'TABS1'.
AT SELECTION-SCREEN .
CASE sscrfields-ucomm.
    WHEN 'UCOMM1'.
      tabb1-prog = sy-repid.
      tabb1-dynnr   = 001.
      tabb1-activetab = 'TABS1'.
      activetab = 'TABS1' .
    WHEN 'UCOMM2'.
      tabb1-prog = sy-repid.
      tabb1-dynnr   = 002.
      tabb1-activetab = 'TABS2'.
      activetab = 'TABS2'.
ENDCASE.
START-OF-SELECTION.
CASE activetab.
    WHEN 'TABS1'.
      SELECT SINGLE maktx FROM makt INTO pl_des WHERE matnr = matnr.
      WRITE: 'Material ' , matnr , mat_des .
    WHEN 'TABS2'.
      SELECT SINGLE name1 FROM t001w INTO pl_des WHERE werks = werks.
      WRITE: 'Plant ' , werks ,pl_des.
Regards
Sudheer

Table Control on a report selection screen -not a dialog transaction screen

Hi
Does anyone know of a way to have table control functionality on a report selection-screen? The program needs to be able to run as a background job (ie cannot be a dialog transaction) and we need to be able to save variants with the selection-screen values.
Any help would be appreciated.
The key point is we want to allow the user to enter a dynamic number of rows of table data on the selection-screen, save a variant containing that data and execute the program with the variant as a background job.
Thanks
Nicole Knight

Hi Nicole,
The main problem is how to persist the data. If you are not able to create a couple of tables then you could always utilise TVARV instead. On a similar line to my original post you could have the button call a dialog transaction. In here you could do your normal GUI table control. When saving the data simply transpose each column into a separate select-option held on TVARV keyed by the 'variant name' + fieldname. Then retrieve and transpose this back when executing the report.
Other methods could be storing the data in cluster xy (see EXPORT TO DATABASE command).
This seems a bit overkill for what would be a couple of maintenance dialogs.
Cheers,
Pete
PS. The view cluster is just a way of hierarchically performing table maintenance across multiple related tables. It offers a good UI for this purpose (header and item config tables) and is utilised extensively in the IMG.

Call report selection screen in module pool program with tab strip control

Hi,
Could anyone explain in detail to call report selection screen in module pool program with tab strip control.
Thanks
Mano

Hi,
Refer std program:
demo_sel_screen_in_tabstrip.
demo_sel_screen_with_tabstrip.
Call your program with SUBMIT stmt form module program.
Reward points if this Helps.
Manish

How to deactivate the fields in a table control of a standard screen

Hi,
I have an requirement to deactivate the fields in a table control of a standard screen in ME22n transaction.I am using a BADI "ME_PROCESS_PO" and in item mathod i am looping at screen for the screen field name in the table control.But it is not working. Can anyone give me the possible solution . Thanx in advance.
With Regards,
Ajit.

>
Vivek Joshi wrote:
> Hello Router ,
> I do not want to set the focus , I want to get focus . User can click on any cell in the table and then press a button in the toolbar . Now in the event handler of the button i want to under which column User has set the focus .
> I hope , I am clear now .
> Thanks for your help
> Regards
> Vivek
An yet you keep getting suggestions of how to set the focus. I looked through the API documentation and I don't see anything that would suggest you can request to see where the current focus is. Perhaps someone might still come along with a solution, but my hopes wouldn't be too high at this point. I can pass the requirement onto Product Definition, as the use case does seem interesting. Perhaps it is something we have even considered in the past.
But for now, there might be a better way to solve your problem. It will probably mean redesign the interaction. What exactly are your requirements? Do you need to be able to get the data in a particular cell of table when a button is clicked? Just throwing out some ideas here, but maybe just use the lead selection to select the row, but then have a button choice to choose the action associated with the column you want. A hack for sure - but it might work. Also it doesn't help you right now, but in the near future update to NetWeaver 7.0, WDA does have a onColSelect event for the table.

Add a button in report selection screen

Hi Experts,
I want to add a userdefined button in report selection screen....so far i have written code like this,...
TABLES : sscrfields.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-010.
PARAMETERS: P_ID LIKE ZBAPITABLE-ID,
P_NM LIKE ZBAPITABLE-NAME.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-020.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (11) TEXT-001 FOR FIELD R1.
PARAMETERS: R1 RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (10) TEXT-002 FOR FIELD R1.
PARAMETERS: R2 RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (10) TEXT-003 FOR FIELD R1.
PARAMETERS: R3 RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (10) TEXT-004 FOR FIELD R1.
PARAMETERS: R4 RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B2.
SELECTION-SCREEN: FUNCTION KEY 1.
MOVE 'SAVE' TO sscrfields-functxt_01.
If i use code like this button was added in application tool bar
but in my selection screen i have two blocks ....in first block i have input fields, and in second there is set of radio buttons...Just below that i want to put one button ....how it is possible...
can anyone plz help me?
Regards,
veena.

Here's th docu link:
[Pushbuttons on the Selection Screen|http://help.sap.com/saphelp_nw70/helpdata/en/9f/dba81635c111d1829f0000e829fbfe/frameset.htm]
Regards,
Clemens

Number of Entries icon should come on report selection screen

Hi,
In my requirement, I want Number of Entries icon on my report selection screen.
Means when i insert the required selection parameter's, then i want to see the total number of entries, which is come after the execution of my report.
Please let me know that how can i do it...
Regards..

HI.
Check the link display number of line items in my report at the title bar
I have extract the part from the above link.
if u want to display the no of line items, as shown in SE16, u create a SET STATUS with a push button with name No of Entries on the report screen.For that status, u write the code as to display no of lines in ur table by using either
DESCRIBE TABLE itab LINES lin.
lin gives the no of line items.
or
select count(*) from vbap.
write sy-dbcnt.
U got require output, when ur pressing No of entries button, then this will display on the output screen.
Thanks and Regards
Sachin Sharma

Hiding Screen fields in a Report selection screen

Hi Experts,
I have a requirement to hide/disable screen fields in a report selection screen when the user clicks on some radio buttons .
Here is the scenario,
1) There are 4 radio buttons four radiobuttons in one group on the selection screen:--
Block no:1
PARAMETER: r_not TYPE c RADIOBUTTON GROUP a1 DEFAULT 'X'.
PARAMETER: r_prgs TYPE c RADIOBUTTON GROUP a1.
PARAMETER: r_remv TYPE c RADIOBUTTON GROUP a1.
PARAMETER: r_noresp TYPE c RADIOBUTTON GROUP a1.
2) Based on the user clicking/selecting the radio buttons no.2,3 nad 4 i need to hide some fields in the other selection block
in the selection screen.The parameters are as follows:
Block no:2( These fields need to be hidden/disabled)
PARAMETER: r_occ(3) TYPE c OBLIGATORY DEFAULT '1'.
PARAMETER: r_and TYPE c RADIOBUTTON GROUP g1.
PARAMETER: r_or TYPE c RADIOBUTTON GROUP g1.
PARAMETER: r_days(3) TYPE c OBLIGATORY DEFAULT '1'.
Thanks

Contd.....
AT SELECTION-SCREEN.
CASE SSCRFIELDS-UCOMM.
      "When Customer button is clicked set flag 1
    WHEN 'FC01'.
      L_FLAG = '1'.
      "When Sales Order button is clicked set flag 2
    WHEN 'FC02'. "Sales order
      L_FLAG = '2'.
      "When Execute button is clicked set flag 4
    WHEN OTHERS.
      L_FLAG = '4'.
ENDCASE.
AT SELECTION-SCREEN OUTPUT.
CASE L_FLAG.
    WHEN '1'. "When Customer button is clicked
      LOOP AT SCREEN.
        "Set the Production and Customer Block as inactive
        IF SCREEN-GROUP1 = 'BL1' OR SCREEN-GROUP1 = 'BL3'.
          SCREEN-ACTIVE = '0'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    WHEN '2'. "When Sales Order button is clicked
      LOOP AT SCREEN.
        "Set the Production and Customer Block as inactive
        IF SCREEN-GROUP1 = 'BL1' OR SCREEN-GROUP1 = 'BL2'.
          SCREEN-ACTIVE = '0'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    WHEN '3'.   "When Refresh button is clicked
      LOOP AT SCREEN.
        "Set the all Blocks as active
       IF SCREEN-GROUP1 = 'BL2' OR SCREEN-GROUP1 = 'BL3' OR SCREEN-GROUP1 = 'BL1'.
          SCREEN-ACTIVE = '1'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    WHEN OTHERS."When Execute button is clicked
      "Set the Sales order and Customer Block as inactive
      LOOP AT SCREEN.
        IF SCREEN-GROUP1 = 'BL2' OR SCREEN-GROUP1 = 'BL3'.
          SCREEN-ACTIVE = '0'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
ENDCASE.
ENDFORM.

How can we read the screen field values from the report selection screen wi

Hi expart,
How can we read the screen field values from the report selection screen with out having an ENTER button pressed .
Regards
Razz

use this code...
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_posnr.
**Read the Values of the SCREEN FIELDs
CALL FUNCTION 'DYNP_VALUES_READ'

Object text not coming in report selection screen

Hi,
i have an object task type for which text has been loaded.this is included in one reports selection screen.But in F4 only kee is displayed and not text.If check button is pressed text is displayed besides key.Also text doesnt come after report is executed.
please help.
Thanks,
Prasanna N.

Hi Prasanna,
In the Query Designer goto the properties of the required object that you want to display key and text for it, Select the Key and Text Display option. Then you can see in report key and text for that object.
Hope this helps.
Veerendra.

Problen in report selection screen

Hi ,
I had a problem in the report.In the report selection screen user asking to keep page no option.So when they select the page no in the selection screen,so from that page number report out put should display.
how to do this.
Thanks,

If you generating the LIST using the classical approch you cah use the SCROLL LIST keyword for this purpose.
Like:
DATA: L_PAGENO TYPE I.
L_PAGENO = 3.
START-OF-SELECTION.
DO 100 TIMES.
WRITE: / SY-ABCDE.
ENDDO.
SCROLL LIST INDEX 0 TO: PAGE L_PAGENO.
TOP-OF-PAGE.
WRITE: 'Top-of-page'.
Regards,
Naimesh Patel

ECCS : custom characteristics into standard report selection screen

Hello guys,
I have added a custom characteristic which is also a subasignment to the EC-CS module.
This field now appears into the standard report selection screen as expected.
I want to define this field as a mandatory selection field, do you know if this is possible? (exemple of standard report CX34A)
Thank you in advance for your help
best regards
Pascal.

Hi Thereza,
This field is already flaged
I have found the following solution : create a variant and assign it to the standard transcation with transaction SE93..
Best regards

Table control in report selection screen

Similar Messages

Maybe you are looking for