Table Control not displaying selected data

I have 2 screens, screen 100 is the selection screen where i select the data to be displayed and 300 is my table control. When I select a single airline in screen 100, it displays all the airlines in my table control in screen 300, how can i fix?

Table control if built via the screen painter wizard uses the contents of internal table declared in the main program and defined in the wizard to display. Check how you are filling this table, perhaps your filling it incorrectly.

Similar Messages

Data of table control not saved in variant of report

Hi ppl,
I have created a report program with some selection parameters.
Also, I have included a table control on the selection screen (using subscreen).
The report works perfectly.
But, when I press the SAVE button on the selection screen to save the data on the selection screen into a variant, the variant only stores the values of the parameters and select-options present on the screen. It is not capturing the data in the table control.
Please let me know if I need to do some additional coding for this.
Thanks,
David.

Hi David,
I too struggled a lot to find the solution ....atlast got it....It possible by exporting and importing the table control values to Database Index.
1. AT SELECTION SCREEN OUTPUT event triggers when you SAVE and GET the variant.
2. So write the logic in AT SELECTION-SCREEN OUTPUT event.
CONSTANTS: c_vari TYPE char30 VALUE
                         '(SAPLSVAR)RSVAR-VARIANT'.
FIELD-SYMBOLS: <lfs_vari> TYPE ANY.
ASSIGN: (c_vari) TO <lfs_vari>.
IF sy-subrc = 0.
    IF <lfs_vari> IS NOT INITIAL.
      IF ok_code = 'SPOS'.
        EXPORT gt_chars[] TO DATABASE vari(tc) ID <lfs_vari>.
      ELSEIF ok_code = space.
        IMPORT gt_chars[] FROM DATABASE vari(tc) ID <lfs_vari>.
      ENDIF.
    ENDIF.
ENDIF.
In the above logic if OK_CODE is 'SPOS', that is for saving the variant with the name <lfs_vari>.
Similarly if the OK_CODE is other than, 'GET'....that is for retrieving the variant. But in case of getting the variant OK_CODE is not filled with 'GET', but variant will be filled. We should take variant filling as base and do as done above.
It worked for me.....

View the .rtf file not display the data in BI Publisher Enterprise.

Hi,
Platform: OBIEE 10g in NT XPsp2
View the .rtf file not display the data in BI Publisher Enterprise.
Step 1, I created Answer-request, create .rtf file with Word and add the request name, Add bar chart and table, preview PDF is working fine with data, Upload this template to Answers, View Template from Answer is working fine with data.
Step 2, Answers – More Products > BI Publisher > My Folders > Create a new report > Edit > Data Model > New > Type: SQL Query > Data Source: Oracle BI EE > Query Builder > from SupplierSales assign Customer, Periods, Sales Facts (select Region, state, Year, Units Shipped) > Results > Save > Save
Click Layouts > New > enter Name ….. > Click Layouts > borrows .rtf file in Manage T file > Upload > Save > Click View
It is showing only the .rtf file without data. Why there is no data?
Please guide me to solve this issue.
Thanks,
Jo

Thanks for you reply,
Our scenario is this report is basically a dissconnected mode report... we are developing these reports for mobile clients.
We dint face this kind of issue while developing other reports.
So please let us know if you have any idea on why we are facing this issue.
Regards,
Maneesh

Strange scenario,Oracle can not display the data in mysql correctly

I use Heterogeneous Service+ODBC to achieve "oracle access mysql"(any other method?),and now i find Oracle can not display the data in mysql correctly:
-------mysql------------
mysql> create table tst(id int,name varchar(10));
Query OK, 0 rows affected (0.00 sec)
mysql> insert into tst values(1,'a');
Query OK, 1 row affected (0.00 sec)
mysql> select * from tst;
------------+
| id | name |
------------+
| 1 | a |
------------+
1 row in set (0.00 sec)
mysql> show create table tst\G
*************************** 1. row ***************************
Table: tst
Create Table: CREATE TABLE `tst` (
`id` int(11) DEFAULT NULL,
`name` varchar(10) DEFAULT NULL
) ENGINE=MyISAM DEFAULT CHARSET=utf8
1 row in set (0.00 sec)
-------------oracle ------------------
SQL> select count(*) from "tst"@mysql;
COUNT(*)
49
SQL> select * from "tst"@mysql;
id
1
SQL> desc "tst"@mysql;
Name Null? Type
id NUMBER(10)

You can make the following query on the result page:
"select * from the_table where movietitle = ? and cinema = ?"
then you set movietitle and cinema to those which the user selected. If the resultset contains more than 0 rows, that means the movie is available.
Below is the sample code, it assumes you have a connection to the database:
PreparedStatement stat = myConnection.prepareStatement("select * from the_table where movietitle = ? and cinema = ?");
stat.setString(1, usersMovieTitleSelection);
stat.setString(2, usersCinemaSelection);
ResultSet res = stat.executeQuery();
if (res.next()) {
out.print("The movie is available");
} else {
out.print("The movie is not available");
}Now just add that to your JSP page. Enjoy ! =)

DataGrid does not display XML data

Hello, and thanks for reading this...
I am having a problem displaying XMLList data in a DataGrid.
The data is coming from a Tree control, which is receiving it
from a database using HTTPService.
The data is a list of "Job Orders" from a MySQL database,
being formatted as XML by a PHP page.
If it would be helpful to see the actual XML, a sample is
here:
http://www.anaheimwib.com/_login/get_all_orders_test2.php
All is going well until I get to the DataGrid, which doesn't
display the data, although I know it is there as I can see it in
debug mode. I've checked the dataField property of the appropriate
DataGrid column, and it appears correct.
Following is a summary of the relevant code.
...An HTTPService named "get_all_job_orders" retrieves
records from a MySQL database via PHP...
...Results are formatted as E4X:
HTTPService resultFormat="e4x"
...An XMLListCollection's source property is set to the
returned E4X XML results:
...The "order" node is what is being used as the top-level of
the XML data.
<mx:XMLListCollection id="jobOrdersReviewXMLList"
source="{get_all_job_orders.lastResult.order}"/>
...The "jobOrdersReviewXMLList" collection is assigned to be
the dataProvider property of a Tree list, using the @name syntax to
display the nodes correctly, and a change event function is defined
to add the records to a DataGrid on a separate Component for
viewing the XML records:
<mx:Tree dataProvider="{jobOrdersReviewXMLList}"
labelField="@name"
change="jobPosForm.addTreePositionsToDG(event)"/>
...Here is the relevant "jobPosForm" code (the Job Positions
Form, a separate Component based on a Form) :
...A variable is declared:
[Bindable]
public var positionsArray:XMLList;
...The variable is initialized on CreationComplete event of
the Form:
positionsArray = new XMLList;
...The Tree's change event function is defined within the
"jobPosForm" Component.
...Clicking on a Tree node fires the Change event.
...This passes an event object to the function.
...This event object contains the XML from the selected Tree
node.
...The Tree node's XML data is passed into the positionsArray
XMLList.
...This array is the dataProvider for the DataGrid, as you
will see in the following block.
public function addTreePositionsToDG(event:Event):void{
this.positionsArray = selectedNode.positions.position;
...A datagrid has its dataProvider is bound to
positionsArray.
...(I will only show one column defined here for brevity.)
...This column has its dataField property set to "POS_TITLE",
a field in the returned XML record:
<mx:DataGrid width="100%" variableRowHeight="true"
height="75%" id="dgPositions"
dataProvider="{positionsArray}" editable="false">
<mx:columns>
<mx:DataGridColumn width="25" headerText="Position Title"
dataField="POS_TITLE"/>
</mx:columns>
</mx:DataGrid>
In debug mode, I can examine the datagrid's dataProvider
property, and see that the correct XML data from the Tree control
is present. However, The datagrid does not display the data in any
of its 6 columns.
Does anyone have any advice?
Thanks for your time.

Hello again,
I came up with a method of populating the DataGrid from the
selected Item of a Tree Control which displays complex XML data and
XML attributes. After the user clicks on a Tree branch, I call this
function:
public function addTreePositionsToDG(event:Event):void{
//Retrieve all "position" nodes from tree.
//Loop thru each Position.
//Add Position data to the positionsArray Array Collection.
//The DataGrid dataprovider is bound to this array, and will
be updated.
positionsArray = new ArrayCollection();
var selectedNode:Object=event.target.selectedItem;//Contains
entire branch.
for each (var position:XML in
selectedNode.positions.position){
var posArray:Array = new Array();
posArray.PK_POSITIONID = position.@PK_POSITIONID;
posArray.FK_ORDERID = position.@FK_ORDERID;
posArray.POS_TITLE = position.@POS_TITLE;
posArray.NUM_YOUTH = position.@NUM_YOUTH;
posArray.AGE_1617 = position.@AGE_1617;
posArray.AGE_1821 = position.@AGE_1821;
posArray.HOURS_WK = position.@HOURS_WK;
posArray.WAGE_RANGE_FROM = position.@WAGE_RANGE_FROM;
posArray.WAGE_RANGE_TO = position.@WAGE_RANGE_TO;
posArray.JOB_DESCR = position.@JOB_DESCR;
posArray.DES_SKILLS = position.@DES_SKILLS;
positionsArray.addItem(posArray);
So, I just had to manually go through the selected Tree node,
copy each XML attribute into a simple Array, then ADD this Array to
an ArrayCollection being used as the DataProvider for the DataGrid.
It's not elegant, but it works and I don't have to use a Label
Function, which was getting way too complicated. I still think that
Flex should have an easier way of doing this. There probably is an
easier way, but the Flex documentation doesn't provide an easy path
to it.
I want to thank you, Tracy, for the all the help. I checked
out the examples you have at www.cflex.net and they are very
helpful. I bookmarked the site and will be using it as a resource
from now on.

About table control in the selection screen

i want to create a table control in the selection screen of my report.i can create the table control using SE51.but how to program with the table control in the report.for example i should fetch the data for the personnel nos entered in the table control of the selection screen.how to do this.can any of u provide sample code for this.
thanks.

Hi vadivel,
Create internal table and create table control using same internal table
e.g.
data : begin of it,
end of it.
start-of-selection.
call screen 100.
If you create table control using wizard then code automatically come here.
Now, Put one push button in same screen where table control is available. let's say push button Display report.
Now, use export <IT> to memory id <ID> and submit report <report name> and return. now, define same internal table in this submitted report and use import <IT> from memory id <ID>. Now, table control data is available in internal table, use that data and make code as per your requirement. If you dont want to use push button then use menu bar and at user-command event.
Hope this help
Regards,
Parag

S_ALR_87013611 is not displaying any data for GL

Hi,
THe report S_ALR_87013611 is not displaying any data for GL. How to go about this
Regards
SM

Hi,
S_alr_87013611 is a report where we can see the planned and actual costs in cost elements in cost center wise for a specific controlling are for a given period.
Please check if your GL accounts are assigned with the cost elements in FS00.
If not create them.
You can assing all cost elements to many GL at a time using
OKb2_ Give the range and the cost element for each range eg, expenses range - cost element 1, incomeange _Cost element as 11 etc.
OKb3 _Create the batch input session
SM30_ Run the batch input session created
Also please check if you have given the cost center group costt senter range while you entered the ranges in the selection screen in this report.
Similarly please check the cost elements and cost elements group also.
Thanks,
Shilpa.

Product Revenue Bookings and Backlog Dashboard does not display any data

Product Revenue Bookings and Backlog Dashboard does not display any data even though the load completed successfully.
They are able to see just the parameters.
Not sure if the upgrade of the database from 9.2.0.6 to 10.2.0.3 is a factor.
What can I check?
Is there some table to verify that the data exists for display in the Product Revenue Bookings and Backlog Dashboard?
Screenshot is at:
https://gtcr.oracle.com/gtcr-dir/gtcr_5637/6415786.993/Product_Revenue_Bookings_Backlog_Dashboard.doc
Support suggested to create a new request set and run the initial load with load all summaries option; but there was no change in the Product Revenue Bookings and Backlog Dashboard.
Any ideas?

hi
We have faced the similar problem after the upgrade to 10G
What we did was
Ran the initial load of time dimension, Item setup request set, and the request set of all the dash board in the clear and initial load mode..
we were able to get the data once the clear and load is completed successfully
Regards
Ramesh Kumar S

How to insert row in table control and save the data in tables

Hi,
I have one table control i am displaying data into table control ,
my problem is : i want to display data into read mode in table control.
but when i click on insert button on the same screen i want one blank line should inserted into table control , then i want to insert some data into table control on that row , when i click the save button . the new data inserted into the table control is insert that data into ztable ,
please give me solution
main problen is how can know inserted line in table control and pass that data into ztable.

Hi,
Follow the below logic,
PROCESS BEFORE OUTPUT.
MODULE STATUS_0001.
MODULE POPULATE_TABLE_CONTROL. --> Get the data from table store in
                                                                      ITAB
LOOP AT GT_CTRL_LP_D516 INTO GS_WA_CTRL_LP_D516
       WITH CONTROL CTRL_LP_D516
       CURSOR CTRL_LP_D516-CURRENT_LINE.
The following module moves data to control
    MODULE MOVE_TO_CONTROL.--> Move data from ITAB to table control
ENDLOOP.
PROCESS AFTER INPUT.
LOOP AT GT_CTRL_LP_D516.
ENDLOOP.
MODULE EXIT AT EXIT-COMMAND.
MODULE USER_COMMAND_0001. --> Here you have to take out the values from table control and update database table
Reward points if helpful.
Thanks and regards,
Mallareddy Rayapureddy,
Munich, Germany.

Managed System Configuration ! The table does not contain any data !

Hi,
In Sol Man Setup , Managed System Configuration, in phase 6 - Create Logical Componets -
There is no Product Version and Product Instance Available.
The message is : " The table does not contain any data "
How can correct this problem ?
Thanks

Hi,
while creating new Logical Component via SMSY , you need to specify Product first.
e.g. if you managed system is ERP 6.0 , select Product as SAP ERP
once you select Product , it automatically fetches information for product Version and Main Instance depending upon Product field input.
Please check and let us know if issue still persits.
Thanks,
Rupali

How can i extend the table control while transfering the data

hi
how can i extend the table control while transfering the data.

Hi,
For table control we have to handle the page down (P+, or what ever function codes are assigned to that activity) activity with our coding.
Just check out this code:
This is the bdc to update the XK01 transaction code (Vendor Creation).
Here we will use table controls for bankings. Here Iam sending the coding and text files.
Coding
REPORT zprataptable2
NO STANDARD PAGE HEADING LINE-SIZE 255.
DATA : BEGIN OF itab OCCURS 0,
i1 TYPE i,
lifnr LIKE rf02k-lifnr,
bukrs LIKE rf02k-bukrs,
ekorg LIKE rf02k-ekorg,
ktokk LIKE rf02k-ktokk,
anred LIKE lfa1-anred,
name1 LIKE lfa1-name1,
sortl LIKE lfa1-sortl,
land1 LIKE lfa1-land1,
akont LIKE lfb1-akont,
fdgrv LIKE lfb1-fdgrv,
waers LIKE lfm1-waers,
END OF itab.
DATA : BEGIN OF jtab OCCURS 0,
j1 TYPE i,
banks LIKE lfbk-banks,
bankl LIKE lfbk-bankl,
bankn LIKE lfbk-bankn,
END OF jtab.
DATA : cnt(4) TYPE n.
DATA : fdt(20) TYPE c.
DATA : c TYPE i.
INCLUDE bdcrecx1.
START-OF-SELECTION.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\first1.txt'
filetype = 'DAT'
TABLES
data_tab = itab.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\second.txt'
filetype = 'DAT'
TABLES
data_tab = jtab.
LOOP AT itab.
PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RF02K-LIFNR'
itab-lifnr.
PERFORM bdc_field USING 'RF02K-BUKRS'
itab-bukrs.
PERFORM bdc_field USING 'RF02K-EKORG'
itab-ekorg.
PERFORM bdc_field USING 'RF02K-KTOKK'
itab-ktokk.
PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-LAND1'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFA1-ANRED'
itab-anred.
PERFORM bdc_field USING 'LFA1-NAME1'
itab-name1.
PERFORM bdc_field USING 'LFA1-SORTL'
itab-sortl.
PERFORM bdc_field USING 'LFA1-LAND1'
itab-land1.
PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-KUNNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
cnt = 0.
LOOP AT jtab WHERE j1 = itab-i1.
cnt = cnt + 1.
CONCATENATE 'LFBK-BANKS(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-banks.
CONCATENATE 'LFBK-BANKL(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankl.
CONCATENATE 'LFBK-BANKN(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankn.
IF cnt = 5.
cnt = 0.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=P+'. " Page down activity
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(02)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
ENDIF.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0210'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-FDGRV'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFB1-AKONT'
itab-akont.
PERFORM bdc_field USING 'LFB1-FDGRV'
itab-fdgrv.
PERFORM bdc_dynpro USING 'SAPMF02K' '0215'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-ZTERM'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0220'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB5-MAHNA'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0310'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFM1-WAERS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFM1-WAERS'
itab-waers.
PERFORM bdc_dynpro USING 'SAPMF02K' '0320'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-LIFNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPLSPO1' '0300'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=YES'.
PERFORM bdc_transaction USING 'XK01'.
ENDLOOP.
PERFORM close_group.
**Flat files for the above code***
Intial screen data file.
1 63190 0001 0001 0001 mr bal188 b in 31000 a1 inr
2 63191 0001 0001 0001 mr bal189 b in 31000 a1 inr
Table control Data:
1 in sb 11000
1 in sb 12000
1 in sb 13000
1 in sb 14000
1 in sb 15000
1 in sb 16000
1 in sb 17000
1 in sb 18000
1 in sb 19000
1 in sb 20000
1 in sb 21000
1 in sb 22000
2 in sb 21000
2 in sb 22000
Regards,
Kumar.

Query not displaying correct data

hi all
my query is not displaying correct data.
in data target secondary sales is showing 1.800 value but in query it is showing
2.00.my requirement is my query shuld show 1.800 value. i also tried to change decimal points but not changes has happend.plz let me knw what is the problem
thanks in advance
shalini gupta

With which u r reconciling the data.
With R3 or Cube.
I think check ur key figure, have u taken the key figure 'with TAX' one or with out tax one??
Regards,
Manoj.

Table control in display mode

Hello All,
Please tell me how to show table control in display mode,
My requirement is , whenever ill put T-code for table maintainace it should be appear in display mode.
Thanks,
Gaurav

table control or table maintenance?
Ok, let me assume that you have table mainteance view done for ZTEST table with Z_V_TABLE (maintenance view generated)
create a tcode now
1) transaction with parameters - se93 - tcode Z_TABLE
2) Transaction SM30
3) skip initial screen checked
4) maintain below values in default values in se93
VIEWNAME Z_V_TABLE
SHOW X
now when we run with Z_TABLE table it will always show in display mode.
Hope - I understood your question correctly

Puffer table is not up to date

Hello,
I get the message "Puffer table is not up to date" after calling Function Module 'BBP_PD_SC_CREATE'
Have u any idea why ?
Bye
sas

Hello,
Please apply the following notes and retest the system behavior:
1091711- Account assignment check in DP direct material
1172437- Follow-on Note of Note 1091711
895004 - SOCO: Customer Table Fields call a shortdump
Kind regards,
Gaurav

Tables & Index not showing any data

Hi All,
I have done the db2 upgradtion from 9.1 to 9.7 with fix pack 4.I am unable to see table size after upgrade. I have checked all the sap collector job running fine.
db02>history>tables& index not showing any data
Regrads,
Mnai

Please make sure RSCOL00 running or execute it manually.
Did you try to run the stats in DB13 ?

Table Control not displaying selected data

Similar Messages

Maybe you are looking for