Table control scroll bar issue

how to set the scroll bar for table control for the transaction code va42 for billing plan tab.
i have added few custom fileds for the table control, when i m re-arranging the columns for the table control, the scroll bar is fixed for one field( as standard) and the scroll bar starts from that place. how to fix the scroll bar or control the scroll bar and sets it position for the desired column.

HI,
Table control ahs a property called FIXED_COLS. You ave to pass the column number to this property.

Similar Messages

Table controls (scroll bars) with LSMW

Hi,
I have to fill a table control from a lsmw project, my problem appears when we need to scroll down table control because there are no more free lines.
My question is if it's possible to manage table control scroll bars to scroll down when all rows will be taken, using lsmw.
Any idea about it would be very appreciated
Thanks in advance

Hi Javier,
I suggest you is that you should loop at the internal table from which you are filling the data into the table control or use a counter for number of rows comming up at a time in the table control. And then put code for ADD+ button. Do this till the end of file or table.
I hope this helps.
Also you can use TCode for the LSMW to upload one record at a time. U can try this also.
Regards,
Usha.

Issue in table control scroll bar

Hi experts,
In Table control I used the following code,
Refresh control 'TCDATA' from screen '200'.
If i use this code i cant able to scroll the data when the table control having multiple lines.
Can any one suggest me?. what i need to do for this..
Edited by: sai.bala on Sep 17, 2010 12:22 PM

Hi ,
try this...
Refresh control 'TCDATA' from screen '200'.
"write this statement below refresh table control
* Describe lines of internal table to extend the table control Vertical
* scroll bar
DESCRIBE TABLE <tablename> LINES TCDATA-lines.
prabhudas

BDC Recording For J1IG with Table Control Scroll bar

Dear Friends,
I am doing BDC program for J1IG Transaction after done recording.
As you knows that, In J1IG transaction max. 11 materials are shows in table control at a time and if more records are there, then we have to scroll down manually so after that, we can see the records.
Now my BDC program runs upto 11 materials but when more than 11 materials, selection is coming on first material only and cursor not showing 12th material.
So i think page down is not working for that issue.
I have seen lots of search forum for that but not getting the proper answer.
Please reply.
Regards,
Shivam.

Dear Dinu,
For better understanding please see the code.
So you suggest what should i have to do?.
LOOP AT jtab INTO wb.
     LOOP AT itab INTO wa WHERE mblnr EQ wb-mblnr.
       CLEAR : flag.
       AT NEW mblnr.
         flag = 'X'.
         CLEAR : cnt, var1, var2.
       ENDAT.
       cnt = cnt + 1.
       IF flag EQ 'X'.
         PERFORM bdc_dynpro      USING 'SAPMJ1IG' '0100'.
         PERFORM bdc_field       USING 'BDC_OKCODE'
                                   '=ECAP'.
         PERFORM bdc_dynpro      USING 'SAPMJ1IG' '0200'.
         PERFORM bdc_field       USING 'BDC_CURSOR'
                                   'T_HEADER-EXDAT'.
         PERFORM bdc_field       USING 'BDC_OKCODE'
                                   '/00'.
         PERFORM bdc_field       USING 'J_1IEXCHDR-EXGRP'
                                   wa-exgrp.
         PERFORM bdc_field       USING 'T_HEADER-MBLNR'
                                   wa-mblnr.
         PERFORM bdc_field       USING 'T_HEADER-MJAHR'
                                   wa-mjahr.
         PERFORM bdc_field       USING 'T_HEADER-EXNUM'
                                   wa-exnum.
         PERFORM bdc_field       USING 'T_HEADER-EXDAT'
                                   wa-exdat.
         PERFORM bdc_dynpro      USING 'SAPMJ1IG' '0200'.
         PERFORM bdc_field       USING 'BDC_CURSOR'
                                   'J_1IEXCHDR-EXGRP'.
         PERFORM bdc_field       USING 'BDC_OKCODE'
                                   '=DETL'.
       ENDIF.
       CONCATENATE 'T_ITEM-ZEILE(' cnt ')' INTO var1.
       CONCATENATE 'T_ITEM-SELECTION(' cnt ')' INTO var2.
       PERFORM bdc_dynpro      USING 'SAPMJ1IG' '0300'.
       PERFORM bdc_field       USING 'BDC_CURSOR'
                                 var1.           "'T_ITEM-ZEILE(01)'.
       PERFORM bdc_field       USING 'BDC_OKCODE'
                                 '=MORE'.
       PERFORM bdc_field       USING var2 "'T_ITEM-SELECTION(01)'
                                 'X'. "record-selection_01_019.
       PERFORM bdc_dynpro      USING 'SAPMJ1IG' '0400'.
       PERFORM bdc_field       USING 'BDC_CURSOR'
                                'T_LOCAL_EXC-EXADDRATE1(01)'.
       PERFORM bdc_field       USING 'BDC_OKCODE'
                                 '/00'.
       PERFORM bdc_field       USING 'T_LOCAL_EXC-MENGE(01)'
                                 wa-menge.
       PERFORM bdc_field       USING 'T_LOCAL_EXC-EXBAS(01)'
                                 wa-exbas.
       PERFORM bdc_field       USING 'T_LOCAL_EXC-EXBED(01)'
                                 wa-exbed.
       PERFORM bdc_field       USING 'T_LOCAL_EXC-BEDRATE(01)'
                                 wa-bedrate.
       PERFORM bdc_field       USING 'T_LOCAL_EXC-EXAED(01)'
                                 wa-exaed.
       PERFORM bdc_field       USING 'T_LOCAL_EXC-AEDRATE(01)'
                                 wa-aedrate.
       PERFORM bdc_field       USING 'T_LOCAL_EXC-ECS(01)'
                                 wa-ecs.
       PERFORM bdc_field       USING 'T_LOCAL_EXC-ECSRATE(01)'
                                 wa-ecsrate.
       PERFORM bdc_field       USING 'T_LOCAL_EXC-EXADDTAX1(01)'
                                 wa-exaddtax1.
       PERFORM bdc_field       USING 'T_LOCAL_EXC-EXADDRATE1(01)'
                                 wa-exaddrate1.
       PERFORM bdc_dynpro      USING 'SAPMJ1IG' '0400'.
       PERFORM bdc_field       USING 'BDC_CURSOR'
                                 'T_LOCAL_EXC-RG23ASER(01)'.
       PERFORM bdc_field       USING 'BDC_OKCODE'
                                 '=BACK'.
     ENDLOOP.
     PERFORM bdc_dynpro      USING 'SAPMJ1IG' '0300'.
     PERFORM bdc_field       USING 'BDC_CURSOR'
                               'T_ITEM-DOCNO(01)'.
     PERFORM bdc_field       USING 'BDC_OKCODE'
                               '=SAVE'.
     CLEAR opt.
     opt-dismode = 'A'.
     opt-updmode = 'S'.
*    opt-defsize = '12'.
*    CLEAR: it_messages[], it_messages.
     CALL TRANSACTION 'J1IG' USING it_bdcdata OPTIONS FROM opt
                                   MESSAGES INTO it_messages.
     REFRESH it_bdcdata.
   ENDLOOP.
   CHECK it_messages[] IS NOT INITIAL.
   LOOP AT it_messages.
     PERFORM fill_messages USING it_messages-msgtyp
                                 it_messages-msgid
                                 it_messages-msgnr
                                 it_messages-msgv1
                                 it_messages-msgv2
                                 it_messages-msgv3
                                 it_messages-msgv4.
   ENDLOOP.
   PERFORM display_messages TABLES tmsg.

Table Control Scroll Bar inactive

Hi All,
I am facing a strange problem. I have placed a table control on my screen and have added the columns. Rest of the functionality is also fine. However, even when the number of rows in the table exceeds its height, the Vertical Scroll bar is inactive and I cannot scroll down to the hidden line items. The horizontal scroll bar is working perfectly.The color of the Vertical Scroll bar is also Dark grey (as in inactive.)
I fail to understand what could be the reason for this? Helpful answers will be suitably rewarded
Regards,
Madhur

Hi Madur,
Try this code :
(assume that the name of your table control is T1)
In the screen logic you will have:
                Loop with control T1.
                   module get_Looplines.
                Endloop.
                    Module get_looplines.
                      Looplines = sy-loopc.
                    Endmodule.
In the PBO of the screen you will have a module that loads the itab and determines the total number of lines read.
               Module load_itab.
                .      (select database table and
append to itab)
                describe table itab lines linecount.
               Endmodule.
We now have all the values to construct a scroll module.
MODULE SCROLL INPUT.
CASE SAVE_OK_CODE.
WHEN 'P--'.
   T1-TOP_LINE = 1.
WHEN 'P-'.
   T1-TOP_LINE = T1-TOP_LINE - LOOPLINES.
     IF T1-TOP_LINE < 1.
        T1-TOP_LINE = 1.
     ENDIF.
WHEN 'P+'.
   T1-TOP_LINE = T1-TOP_LINE + LOOPLINES.
     IF T1-TOP_LINE > LINECOUNT.
        T1-TOP_LINE = LINECOUNT - LOOPLINES + 1.
     ENDIF.
WHEN 'P++'.
   T1-TOP_LINE = LINECOUNT - LOOPLINES + 1.
ENDCASE.
ENDMODULE.                 " SCROLL INPUT
    WHEN 'P--'.
      CLEAR SY-UCOMM.
      CTR1-TOP_LINE = 1.
    WHEN 'P-'.
      CLEAR SY-UCOMM.
      CTR1-TOP_LINE = CTR1-TOP_LINE - LINECOUNT1.
      IF CTR1-TOP_LINE < 1.
        CTR1-TOP_LINE = 1.
      ENDIF.
    WHEN 'P+'.
      DESCRIBE TABLE ITAB1 LINES N1.
      CTR1-TOP_LINE = CTR1-TOP_LINE + LINECOUNT1.
      IF CTR1-TOP_LINE > N1.
        CTR1-TOP_LINE = N1.
      ENDIF.
      CLEAR SY-UCOMM.
    WHEN 'P++'.
      DESCRIBE TABLE ITAB1 LINES N1.
      CLEAR SY-UCOMM.
      CTR1-TOP_LINE = N1.
Cheers
Sunny
Rewrd points, if helpful

Table control - scroll bar

Hello,
There is table control in my program and screen.
This object with created table control wizard.
This object on scroll bar(ver.-hor.)
I want to not see scroll bar.(visible = false)
Pleace help me.
Thanks.

Hello Melih
I do not think that we can effect the scroll bars. If the size of the screen/dynpro is sufficient to display the entire table control then there should be no scroll bar. If the screen is smaller than the table control then the GUI automatically displays the scroll bars (which makes perfect sense).
Regards
Uwe

Table view: scroll bar issue

Hi guru's,
I'm having trouble with defining a table view. I'm building a KPI dashboard that should be able to hold the results of many queries. I have one query that will always return a single row. Therefore, I resized the layout of the table view so that it will only display 1 row. However, when deploying the model, I get a vertical scrollbar! The table shows the record from the query and even part of a second (empty) row and I'm able to scroll down even further. I have tried all options, but I can't get rid of the scrollbar.
Does any of you guys have a solution?
Best regards,
Arno

Hi Prachi,
thanks for your reply! You are completely right, regarding the flex compiler. We use that one, because we get errors using the Webdynpro compiler. I'll get basis to look into it, because form view is not an option for us (but that's another topic ).
Best regards,
Arno

Table control scrolling issue

hi,
      I am having a issue with table control scrolling. When i was passing less number of records (say 19 records becuase table control is having 19 lines) to table control in BDC call transaction, everything is working fine. after filling the 19 line items its not taking the next line item the page is not scrolling down. T.code is <b>GS02</b>. please suggest me. following is my code
REPORT ZLOCK_WBS_ELEMENTS MESSAGE-ID ZFI_RESTMT.
                       TYPES                                         *
*types declaration for final internal table
types: begin of ty_final,
         ryear       like zupi5a-ryear, "Fiscal year
         rbukrs      like zupi5a-rbukrs, "Company code
         racct       like zupi5a-racct, "Account number
         rzzps_posid like zupi5a-rzzps_posid, "WBS element
         rzzmtit     like zupi5a-rzzmtit, "MPM title
         rzzmfor     like zupi5a-rzzmfor, "MPM format
         rzzmatnr    like zupi5a-rzzmatnr, "Material number
         rzzcou      like zupi5a-rzzcou, "Country
         rzzfow      like zupi5a-rzzfow, "Financial owner
         rzzoow      like zupi5a-rzzoow, "Operational owner
         rzzcon      like zupi5a-rzzcon, "Licensee Contract
         rzzloc      like zupi5a-rzzloc, "Licensor Contract
         kostl       like zupi5a-kostl, "Cost center
         zzfam       like zupi5a-zzfam, "Fame Number
         zzfor       like zupi5a-zzfor, "Format
         zzprd       like zupi5a-zzprd, "Product Line
         zzwin       like zupi5a-zzwin, "Window group
         zzwig       like zupi5a-zzwig, "Window
         rtcur       like zupi5a-rtcur, "Currency Key
         tsl         like zupi5a-tsl, "Amount Transaction currency
         hsl         like zupi5a-hsl, "Amount Co. code currency
         ksl         like zupi5a-ksl, "Amount Group currency
         msl         like zupi5a-msl, "Quantity
       end of ty_final.
Data
data: j_final2      type standard table of ty_final,
       v_final2      type standard table of ty_final.
data: wa_final2     type ty_final.
data: bdcdata like bdcdata occurs 0 with header line,
       messtab like bdcmsgcoll occurs 0 with header line.
data :begin of i_values occurs 0.
        include structure setvalues.
data :end of i_values.
data: v_counter(3) type n value '0',
      v_from    like rgsbl-from,
      V_FROM(30) TYPE C,
      v_setname like zfi_setid_cc-setid,
      v_setid like sethier-setid,
      n type i,
      l type i,
      k type i value '1',
      p_rbukrs like zupi5a-rbukrs.
import p_rbukrs from memory id 'bukrsid'.
import i_final2 to j_final2 from memory id 'table'.
To eliminate duplicate WBS elements to be stored into the sets
v_final2 = j_final2.
sort v_final2 by rzzps_posid.
delete adjacent duplicates from v_final2 comparing rzzps_posid.
select single setid into v_setname
       from zfi_setid_cc
       where rbukrs EQ p_rbukrs.
IF sy-subrc <> 0.
MESSAGE E005.
ENDIF.
*write 'ZFIRESTATEMENT' to v_setname.
call function 'G_SET_GET_ID_FROM_NAME'
     EXPORTING
          shortname = v_setname
     IMPORTING
          new_setid = v_setid.
call function 'G_SET_TREE_IMPORT'
     EXPORTING
          client     = sy-mandt
          langu      = sy-langu
          setid      = v_setid
     TABLES
          set_values = i_values.
describe table i_values lines n.
describe table v_final2 lines l.
write n to v_counter.
clear bdcdata.
refresh bdcdata.
perform bdc_dynpro      using 'SAPMGSBM' '0105'.
perform bdc_field       using 'BDC_CURSOR'
                              'RGSBM-SHORTNAME'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
*perform bdc_field       using 'RGSBM-SHORTNAME'
                             'ZFIRESTATEMENT'.
perform bdc_field       using 'RGSBM-SHORTNAME'
                              v_setname.
loop at v_final2 into wa_final2.
   v_counter = v_counter + 1.
perform bdc_dynpro      using 'SAPMGSBM' '0115'.
concatenate 'RGSBL-FROM(' v_counter ')' into v_from.
perform bdc_field     using 'BDC_CURSOR'
                              v_from.
perform bdc_field     using 'BDC_OKCODE'
                              '/00'.
perform bdc_field     using 'RGSBS-TITLE'
                              'FI Restatement-WBS locking'.
perform bdc_field     using v_from
                               wa_final2-rzzps_posid.
endloop.
perform bdc_dynpro      using 'SAPMGSBM' '0115'.
perform bdc_field       using 'BDC_CURSOR'
                              v_from.
perform bdc_field       using 'BDC_OKCODE'
                              '=SAVE'.
perform bdc_field       using 'RGSBS-TITLE'
                              'FI Restatement-WBS locking'.
perform bdc_dynpro      using 'SAPMGSBM' '0105'.
perform bdc_field       using 'BDC_OKCODE'
                              '/EBACK'.
perform bdc_field       using 'BDC_CURSOR'
                              'RGSBM-SHORTNAME'.
call transaction 'GS02'
using bdcdata
mode 'A'
update 'S'
messages into messtab.
       Start new screen                                              *
form bdc_dynpro using program dynpro.
clear bdcdata.
bdcdata-program = program.
bdcdata-dynpro   = dynpro.
bdcdata-dynbegin = 'X'.
append bdcdata.
endform.
       Insert field                                                  *
form bdc_field using fnam fval.
if fval <> ' '.
    clear bdcdata.
    bdcdata-fnam = fnam.
    bdcdata-fval = fval.
    append bdcdata.
endif.
endform.
this is working fine when they r less than 19 line items. please suggest me with the logic when it is more than 19 line items.

Hi,
Just try to increase the table control lines before display.
v_counter = n + 10.

Table Control Scrolling issue in Module Pool

Hi,
I've done table control. From Selection screen i've 3 buttons, if we'll press on one button one table control is visible. There if i do scrolling up to 10 records and i come back to selection and press another button again in table control scrolling is at previous place only. May be its nt refreshing.
Kinldy help on this issue.
With Regards,
jack.

hi,
i've done like below. But no result.

[ADF-11.1.2] Scroll bar Issues - Please file BUGs for these issues.

Hello,
Recently, I have started working on ADF and till now I found 2 scroll bar issues with Oracle ADF.
1. af|inputComboboxListOfValues : Scroll bar appears on Google Chrome.
Screenshot: http://imageshack.us/photo/my-images/829/inputcomboboxlistofvalu.jpg/
2. Setting Table "columnStretching" brings dummy scroll bar : [ADF-11.1.2] Setting Table "columnStretching" brings dummy scroll bar
I beleive that these two are scroll bar related Bugs but what I understand from ?messageID=9773962 that since I don't have support contract, I can't file a bug.
I have created this thread so that responsible people can take actions accordingly.

Shay,
Thank you for your reply. I will take a look at your links.
Use Case:
Application will have different BC for different IT Assets (like Monitor, Keyboard, Servers etc), which will basically hold records for all available Assets (like Display Resolution, screen size etc for all monitor in Monitor BC).
I want to give user; the ability to create, for e.g., the sub-class of Monitor to store more specific attribute-values in different table (which will be linked Parent BC). For e.g.: They may want to care about holding CRT and LCD Monitor records in separate new database table -- Application will ask user what all attributes/Columns they want to see for LCD which is specific to this type AND which is not present in already existing out-of-box Monitor BC/Table - e.g. - "Viewing Angle" Attribute).
With that said, I can write code to create database table on fly (having 1-to-1 foreign key reference to parent table) but writing ADF part seems difficult. I also wanted application to automatically generate new page for newly added VO BC. E.g.: LCD-Monitor.JSPX inheriting all attributes from monitor (parent VO) in the same structure as Monitor.JSPX file is having with extra LCD-specific Attributes in separate panel tab (which again UI developers can customized it).
Too much to expect huh !
I am going to start building the application so If not above way, any other suggestion to achieve the requirement ?
Edited by: Anandsagar Sah on Aug 29, 2011 9:23 PM

Page shift due to vertical scroll bar issue

I'm working through a vertical scroll bar issue in my design, using a ProjectSeven CSS page template. When testing the site in my browsers (FF/Safari/IE/Opera), and IF the scroll bar is not present, the entire page shifts to the left (the width of the scroll bar) when I click a link in the left column of my design. The page does not shift when the vertical scroll bar is present. Support at P7 suggested the following fix:
html, body {
height: 100.1%;
margin: 0 0 1px;
I've tried placing this markup in about ten different places but can't seem to find the right location in the code. Is it possible for someone in the forum to take a look at my page source and show me where/how to locate this fix?
See my test site at:
http://www.murcal.com/test_curvi_2.html
Thanks . . . .

PZ,
I'd like to place the fix where you've suggested, but that's the whole issue.
I simply don't know where my CSS ends (duh). Is it possible that you show me exactly where?
Hopefully this is the right section of my code:
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>PVII Curvitude</title>
<link href="p7curvitude/p7CRVboxes982_2col.css" rel="stylesheet" type="text/css" />
<link href="p7curvitude/p7CRV08.css" rel="stylesheet" type="text/css" />

<script type="text/javascript" src="p7pmm/p7PMMscripts.js"></script>
<link href="p7apm/p7APM10.css" rel="stylesheet" type="text/css" media="all" />
<script type="text/javascript" src="p7apm/p7APMscripts.js"></script>
<link href="p7pmm/p7PMMh04.css" rel="stylesheet" type="text/css" media="all" />
<link href="p7pmm/p7PMMh07.css" rel="stylesheet" type="text/css" media="all" />
</head>
<body>
I've tried placing it in about ten different places, but I'm wrong everytime.
Obviously, I'm a beginner trying to learn. I just can't seem to place it correctly.

How to read data in Page Control "Scroll Bar" in Component Buffer ?

Folks,
Hello. My Component has 2 pages: "JournalLine" and "JournalTotal". In the page "JournalLine", I insert page control "Scroll Bar" and then insert a record "JournalLine2" into the "Scroll Bar". Thus, the Component Structure is as follows:
Scroll - Level0
JournalLine
JournalTotal
Scroll - Level1 Primary Record JournalLine2
The fields in "JournalLine" are Unit, ID, Date.
The fields in "JournalTotal" are Unit, ID, Date, TotalDebit, TotalCredit.
The fields in "JournalLine2" are Account, Amount.
Since the record "JournalLine2" is inside of the page "JournalLine" and inside of page control "Scroll Bar", I click on "+" push button and add as many lines as I need and type in data into each line.
My purpose is to add up all numbers in "Amount" field of "JournalLine2" and assign the total amount to "TotalDebit" or "TotalCredit" in "JournalTotal" page. My PeopleCode is as follows:
Local RowSet &level0, &level1, &level2;
Local Row     &total;
Local Field     &field;
&level0 = GetLevel0( );     /* get level0 Rowset */
&total = &level0(2);     /* get row JournalTotal because it's on the 2nd position in level0 */
&level1 = &level0.GetRow(1).GetRowSet(Scroll.JournalLine);     /* get level 1 RowSet for record JournalLine */
&level2 = &level1.GetRow(2).GetRowSet(Scroll.JournalLine2); /* Assume this line gets all records in JournalLine2 */
For &I = 1 to &level2.ActiveRowCount
     &field.Value = &field.Value + &level2.GetRow(2).JournalLine2.Amount.Value;
End-for;
&total.GetRecord(Record.JournalTotal).GetField(Field.TotalDebit).Value = &field.Value;
&total.GetRecord(Record.JournalTotal).GetField(Field.TotalCredit).Value = &field.Value;
I place the above PeopleCode in Record Field "Amount" FieldChange Event. Because all records and fields are in the component buffer, in Browser, after type in data into each line in the record "JournalLine2" in the page "JournalLine", then click on page tab "JournalTotal", the total amount should appear in the field "TotalDebit" or "TotalCredit". But nothing is in the field "TotalDebit" or "TotalCredit".
The above PeopleCode is not working out. I place the above code in component record field "Amount" FieldChange Event as well and not working either. My questions are:
First, Is it correct for the above PeopleCode to read all records in "JournalLine2" Scroll Bar in page "JournalLine" ?
Second, Do we need to use some methods like ScrollSelect( ) to read those data in Scroll Bar ?
Third, Do we need to use "ActiveRecordCount" instead of "ActiveRowCount" ?
Thanks in advance !

Folks,
This question has been solved by myself. Thanks.

ADF vertical table scroll bar issue when many records.

Good morning!
I am using Oracle JDeveloper version 11.1.1.6.0.
I have a search form and a simple ready-only table displaying about 1 million of records.
At the top of my search form, I have navigation buttons (First, Previous, Next, Last).
So when I click for example on the Next button, my table will highlight the next corresponding row as expected.
But here is the issue. When I click the Last button, the vertical scroll bar of the table does not scroll (automatically) to the end and display to me the very last row of my table.
How can I achieve this? When I manually scroll to the last row, I would find it highlighted but I need the vertical scroll bar to react on Last and First buttons click even though I have a big number of rows.
What should I do?
Any suggestion will be very much appreciated
Life.

Hi Frank,
I have found the answer. Here it is for anyone who would ever have or meet the same issue.
In Jsf table property inspector
I binded my table to my java bean (I called it myRichTable).
I added the First and Last buttons as partial triggers of my table
In java bean
In my last() method I encluded the following line of code: myRichTable.setDisplayRow(myRichTable.DISPLAY_ROW_LAST).
And in the first(): myRichTable.setDisplayRow(myRichTable.DISPLAY_ROW_FIRST);
Thanks!

Mobile table scroll bar issue

Hello All,
I have used sap.m.Table on my mobile app page and I have set growingScrollToLoad to true.
Everytime I scroll the page down, table loads more and more data, but the scroll bar position moves to the top automatically.
This is very annoying because after getting bigger set of data, my scroller moves back on top and I have to move it all the way down to where I was.
Any ideas as to why the scroll bar moves up automatically and how to prevent it?
Using UI5 1.18
-Rutika

Hi Frank,
I have found the answer. Here it is for anyone who would ever have or meet the same issue.
In Jsf table property inspector
I binded my table to my java bean (I called it myRichTable).
I added the First and Last buttons as partial triggers of my table
In java bean
In my last() method I encluded the following line of code: myRichTable.setDisplayRow(myRichTable.DISPLAY_ROW_LAST).
And in the first(): myRichTable.setDisplayRow(myRichTable.DISPLAY_ROW_FIRST);
Thanks!

Problem in module pool with table control scrolling

hi,
i am using the table control in module pool,in the table control i have radion button for all the rows.
After i got the data into the table control ,if i select radio button and if i press vertical scroll bar button, that radio button is deselecting,how to solve this issue.
Please help me.

Hi
Generally we don't keep radiobuttons in table control for selecting the records
We keep check boxes for selecting the records
Radio button is used to select a single from a group of records and at a time only one is selected, where as checkboxes at a time you can select a single or multiple.
So use checkboxes and code correctly see the doc for Table control
syntax:
CONTROLS .
if you only want to determine the row of the table control. SY´-SUBRC allows you to check if the cursor is placed in a row of a table control.
u need to comment the performs of table control fields and write ur own perform statements. And u have to declare the table control fields as separate internal tables.
Go through this urls.
www.****************
www.sap-img.com
Check the below links.
http://www.planetsap.com/howdo_a.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/dbac5135c111d1829f0000e829fbfe/content.htm
http://sap.niraj.tripod.com/id25.html
Reward points if useful
Regards
Anji

Table control scroll bar issue

Similar Messages

Maybe you are looking for