Table does not exist in system after DB Connect

Hi Everyone,
I must extract data from a oracle db.  I create a source system with DB Connect and it's connect successful.
Later, i create a datasource for that source system. but it show the table does not exist in system. I'm sure the table is correct. why?
Thanks!

Check the schema names & ensure it is with the same owner/name as in the DB source table/view. You can also use a simple lookup table which checks table/views in your schema from other standard tables.

Similar Messages

  • Table does not Exist in Unix OS after it has been created In HTML_DB

    I created a table in HTML_DB and can see the table fine in my HTML_DB application. However, when I go to the Unix OS and try to look up the database using SQL*Plus, I am getting an error saying the table does not exist. Any help as to why this is happening would be appreciated.
    Kelly

    When I go to the Unix OS, I then try and search for the table in the exact schema that I used in >HTML_DB.I don't see what the Unix OS has to do with it here...do you mean you're connecting via SQLPlus?
    If you're connecting via SQLPlus, which schema are you connecting to? (i.e. are you certain you're connecting to the same schema that the table was created under when you were connected to Application Express).

  • The VersionEntity table does not exist in the LiveCycle database. Please bootstrap LiveCycle db

    I am using Livecycle 8.2 running on JBOSS. I get this error in server log
    2013-07-25 13:48:33,809 ERROR [com.adobe.idp.config.AdobePreferenceFactory] UserM:GENERIC_ERROR: [Thread Hashcode: 5001776] Problem with system root| [com.adobe.idp.storeprovider.jdbc.DBStoreFactory] errorCode:12293 errorCodeHEX:0x3005 message:The VersionEntity table does not exist in the LiveCycle database. Please bootstrap LiveCycle database.
    2013-07-25 13:48:33,809 INFO  [STDOUT] java.lang.RuntimeException: The VersionEntity table does not exist in the LiveCycle database. Please bootstrap LiveCycle database.null
    Also not able to login using Administrator password. Assuming above error is the cause. Please any help is appreciated. Thnks.

    Is this observed on a running server or have you made any changes to LC server or database after which this error is seen?
    --Santosh

  • Short dump 'Table does not exist in database'

    Hello All,
    When a report is executing it is going to short dump by saying 'Table does not exist in database'. As per the short dump analysis this issue is happening because of the following   Native SQL statement statement :
    Program :  %_T050N0 (This is a dynamic  program generating by SAP )
    Form Name :  DYN_LIC_SEL_TOT
    exec sql performing LOOP_MOVE_WRITE_ISAP.
    select single_plate, itm_num, ctry_code, model_lot,
    lic_hold_flg, qty into :dcat-lplate, :dcat-matnr,
    :dcat-werks, :dcat-charg, :dcat-holdflag,
    :dcat-qty from ZLICENSE_R2 where itm_num   = :p_matnr and
                    model_lot = :p_charg
    endexec.
    As per the customer this issue occurring since they migrated the SAP  back-end data base from Oralce to DB6. Here I felt that ZLICENSE_R2 is not migrated from the  Oracle to DB6. But as per the BASIS Team, even this table was not maintained in Oracle also. If the table was not maintained in the Oracle, this issue should have been there even before migration also.
    Following is the short dump details:
    Short text
        Table does not exist in database.
    What happened?
        The table or view name used does not
        exist in the database.
        The error occurred in the current database connection "DEFAULT".
    What can you do?
        Check the spelling of the table names in your report.
        Note down which actions and inputs caused the error.
        To process the problem further, contact you SAP system
        administrator.
        Using Transaction ST22 for ABAP Dump Analysis, you can look
        at and manage termination messages, and you can also
        keep them for a long time.
    Error analysis
        An exception occurred that is explained in detail below.
        The exception, which is assigned to class 'CX_SY_NATIVE_SQL_ERROR', was not
         caught in
       procedure "DYN_LIC_SEL_TOT" "(FORM)", nor was it propagated by a RAISING
    clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    Triggering SQL statement: "select single_plate, itm_num, ctry_code, model_lot,
    lic_hold_flg, qty from ZLICENSE_R2 where itm_num = ? and model_lot = ? "
    Database error code: "-204"
    Could you please  let me know what might be the reason for this issue.
    Many Thanks in Advance.

    Transaction SE11, input ZLICENSE_R2 for table name, and display the table. Did the table display? If not, that is the main problem.
    If the table displays, go to menu item Utilities -> Database Object -> Database Utility
    In the resulting screen, under the "Status" fields, you should see text "Exists in the database." If you don't, then the table exists in the dictionary, but doesn't exist in the database system. Click the "Create database table" button and then you should be able to run the program.
    You may need basis team's help to carryout some of these actions.

  • Cannot retrieve table metadata - Table does not exist: ODP source 0WRKCNT_CATG_TEXT does not exist

    Hi, when i able to import the 0WRKCNT_CATG_TEXT extractor into source system i am getting the above bug Cannot retrieve table metadata - Table does not exist: ODP source <0WRKCNT_CATG_TEXT> does not exist, i have been checked in RSA5 T code to check the object is active or not, its active and its available in ROOSATTR table with enabled mode,but still its showing the error, can anyone help on this ..

    Hi Airings,
    'ORA-00942: table or view does not exist'
    According to the error message, it seems that the migrating table or view does not exist in the database, or SSMA does not have access to it. To troubleshoot the issue, please check the following things.
     1. Verify that if the spelling of the table or view name is correct.
     2. If the table or view exists but is in a different schema from the current schema where the SQL is executing (in other word, the table doesn’t own by you, but owned by other user), the ORA-00942 error will return too. Resolve this by
    explicitly reference the table or view by specifying the schema name (schema_name.table_name).
    3. SSMA queries some additional catalog tables that you may not have permission to, please make sure that you grant the account permission to
     read sys.mlog$. For more details, please review this similar thread:
    Bug in SSMA For Oracle 6.0 for non-dba Oracle user.
    Reference:
    ORA-00942 Table or View Does Not Exist Oracle Error
    Thanks,
    Lydia Zhang
    Lydia Zhang
    TechNet Community Support

  • /BIC/Y______ tables does not exist

    Ladies/Gents
    I am trying to delete master data from an InfoObject in RSD1. When I try to delete a row I get an error that the /BIC/Y______ table does not exist. I suppose SAP is looking for the time (Y-table)....but the check-box u201Ctexts are time-depu201D is NOT checked for this Info Object?
    How can I solve this problem? Thanks!

    Hello,
    Install this note 1110324, I had the same problem and after putting the problem to sap they created that note.
    Please assign points,
    Diogo.

  • Table does not exist - DbLink

    Hello, I have 2 instances, into production environment, instance A and instance B. Into instance A I have a dblink to instance B...
    The problem appear when I want to see the indexes of a table of instance B from instance A, to do this I press F4 into TOAD over:
    owner.table@dblink
    and when I click into tab "Indexes", Oracle said me: "The table does not exist", I review the grants, and this is ok, and the table exist in instance B.
    One explanation, I have the same environment into testing, and there work perfectly, I have the same dblinks, the same users and the same grants.
    Any suggestion to help me.

    You may want to contact the folks that make TOAD.
    My guess is that TOAD is querying the local USER_/ ALL_/ DBA_INDEXES table rather than the USER_/ ALL/ DBA_INDEXES table at the remote server. You could run a client-side SQL trace to see what SQL is being generated to see if the problem is that TOAD is generating the incorrect SQL or whether there is some problem with the database. But I'm not sure how productive that would be since it's not like you could fix the SQL TOAD is submitting. If there is an option in TOAD that changes the behavior here, it's certainly possible that someone here will know it. But TOAD support is probably more likely.
    Justin

  • Table does not exist for the sys user

    Hey Everyone,
    I am having a strange problem with 10G 10.2. I keep getting the table does not exist for all the tables when I am logged in as sys. It is strange because I can query the same tables being logged in as a regular user say 'scott'. I can't figure out what the problem is since it could not be privileges because the user is sys. Is there something I am missing here. Any advice would be welcome.
    Thanks,
    Sarang

    Yeah i am using the query....
    SELECT * FORM SCOTT.EMP
    It is a little wierd. I did a full database restore yesterday night. I dont know if that has anything to do with this. Will have to take a look at the logs.

  • Native SQL "Table does not exist in database"

    Hi Developers,
    I'm doing a database connection to an Oracle db and trying to read data using native SQL - I keep getting the runtime error "table does not exist in database" on the statement Fetch Next Cursor. The following is the code snippet (I've commented out the Exec SQL and Fetch Next to make sure I have a connection and I do). HR is a schema in the database and T_Donation is a table in HR.
    Data: w1(3),
             c1 type cursor.
    start-of-selection.
      if con_name is initial.
        write: 'No connection specified'.                       "#EC NOTEXT
        return.
      endif.
    try to open the connection and catch the errors (if any)
      try.
          con_ref = cl_sql_connection=>get_connection( con_name ).
        catch cx_sql_exception into sqlerr_ref.
        error occured
          write:
            'Could not open connection', con_name, '.'.         "#EC NOTEXT
          if sqlerr_ref->unknown_connection = 'X'.
            write:
              / con_name, 'is not defined in DBCON'.            "#EC NOTEXT
          elseif sqlerr_ref->db_error = 'X'.
            write:
              / 'sql error', sqlerr_ref->sql_code, 'occured:',
              / sqlerr_ref->sql_message.                        "#EC NOTEXT
          else.
            perform get_trace_file using dev_file.
            write:
              / 'DBI error', sqlerr_ref->internal_error, 'occured.',
              / 'See trace file for further info:',
                icon_read_file as icon hotspot, dev_file.       "#EC NOTEXT
          endif.
          return.
      endtry.
    connection successfully opened
      write:
        / 'Connection', con_name, 'successfully opened.'.       "#EC NOTEXT
    *- Get the data from MS-SQL Server
      EXEC SQL.
        open C1 for
        SELECT HR.T_DONATION.DN_DONATIONYEAR
        FROM HR.T_DONATION
      ENDEXEC.
      do.
        EXEC SQL.
          FETCH NEXT C1 into :w1
        ENDEXEC.
        if sy-subrc = 0.
          perform loop_output.
        else.
          exit.
        endif.
      enddo.
      EXEC SQL.
        CLOSE C1
      ENDEXEC.
    close connection again
      con_ref->close( ).
      write:
        / 'Connection', con_name, 'closed'.                     "#EC NOTEXT
    end-of-selection.
    *& Form LOOP_OUTPUT
    Output
    form loop_output .
      write: /5 w1.
    endform. " LOOP_OUTPUT
    Thanks for your help.
    Jim
    Message was edited by:
            James Barnes

    Well my advice is to check the question in the sql tutorial, it will be quicker then getting an answere.

  • Table does not exist error

    create table dytab(x number);
        create or replace procedure p_testdytab(p_tab in varchar2)
        is
        begin
        execute immediate ' create table dytab2 as select x from p_tab';
        end p_testdytab;
        begin
        p_testdytab('dytab');
        end;
        /why the procedure is not replacing parameter p_tab with the table name ? I get table does not exist error

    Hi,
    user650888 wrote:
    create table dytab(x number);
    create or replace procedure p_testdytab(p_tab in varchar2)
    is
    begin
    execute immediate ' create table dytab2 as select x from p_tab';
    end p_testdytab;
    begin
    p_testdytab('dytab');
    end;
    /why the procedure is not replacing parameter p_tab with the table name ? I get table does not exist errorAnything inside single-quotes is literally what is written. In this case, p_tab is inside single-quotes, so p_tab doesn't stand for some other value, such as 'dytab'; it literally means p_tab,
    If you really must use EXECUTE IMMEDIATE, then don't put the variable name inside the single-quotes.
    dynamic_txt := 'create table dytab2 as select x from ' || p_tab;
    dbms_output.put_line (dynamic_txt || ' = dynamic_txt');
    EXECUTE IMMEDIATE dynamic_txt;Whenever you write dynamic SQL, display it before executing it, at least during testing. That way, you can see exactly what is being executed, which is a huge help when it causes an error.
    As Tubby said, creating tables in PL/SQL is usually a very bad idea. Whatever you need to do, Oracle probably has a simpler, more robust way to do it. Say what your business requirements are, and someone will help you find a good way to do what you need.

  • Table does not exist odbc -2004

    Hi,
    I'm updating a UDO in SBO 9. PL11 by GeneralService via DI API
    The code worked without problems, but I activated the option LOG from customizing options and get the following error:
    "Table does not exist odbc -2004 "
    sCmp = AccCommon.Main.Company.GetCompanyService
                oGeneralService = sCmp.GetGeneralService(LocalConstants.UDO_Colegiados)
                oGeneralParams = oGeneralService.GetDataInterface(SAPbobsCOM.GeneralServiceDataInterfaces.gsGeneralDataParams)
                oGeneralData = oGeneralService.GetDataInterface(SAPbobsCOM.GeneralServiceDataInterfaces.gsGeneralData)
                oGeneralParams.SetProperty(LocalConstants.CAB_Colegiados.cCode, sNumCol)
                oGeneralData = oGeneralService.GetByParams(oGeneralParams)
                oGeneralData.SetProperty(LocalConstants.CAB_Colegiados.cEstado, LocalConstants.Colegiados.Keys_Estado.cInactivo)
                oGeneralService.Update(oGeneralData)
    Any Idea?
    Thanks!

    Thanks,
    We delete the UDO and returned  to generate. We assume that there were changes in the structure that was not reflected.
    Without changing the code works
    Regards

  • 'table does not exist' when creating generic datasource

    I went to SBIW->Business Content DataSources->Transfer Business Content DataSources-chose "content delta". it said 'comparison bct <-> cust version ' then it counted thru several objects for a few minutes and finished with no warnings.
    then I selected each datasource under co-om-cca and activated those with no problems.
    problem: now when i try to create came generic datasource using co-om-cca application component i get mssg when saving 'the specified table does not exist'...so now it isn't even letting me create a datasource at all using a standard application component either.
    I have been having many problems with creating datasources and using application components and this is why I did the first paragraph because I don't know what else to try.
    Please help, thanks.

    I have answered my own question.  I wasn't entering the view/table and it was my own complete oversight.

  • EXP-00011 table does not exist

    Hi guru's,
    My DB Version: 10.2.0.2.0
    OS Version: Solaris 10
    While trying to export a table from a schema i am getting error:
    exp-00011 table does not exist
    when i check the source database i found that table name as 'abc' exists there
    but when i log on to schema and try to check the info about the abc table with below mentioned query i got below error:
    SQL> select table_name from user_tables where table_name='rtx';
    no rows selected
    i also checked with table_name='RTX'
    i am getting the same error.
    Can anyone help me out

    sorry the table name is rtx
    C:\Documents and Settings\Administrator>exp userid=sysadm/rtxprod@rtxprod tables=sysadm.rtx file='E:\rtx.dmp' buffer=1000000 feedback=10000 statistics=none
    Export: Release 10.2.0.1.0 - Production on Thu May 10 14:36:34 2012
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
    With the Partitioning, OLAP and Data Mining options^C
    C:\Documents and Settings\Administrator>exp userid=sysadm/rtxprod@rtxprod tables=sysadm.rtx file='E:\rtx.dmp' buffer=1000000 feedback=10000 statistics=none
    Export: Release 10.2.0.1.0 - Production on Thu May 10 14:37:05 2012
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
    With the Partitioning, OLAP and Data Mining options
    Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
    server uses WE8ISO8859P1 character set (possible charset conversion)
    About to export specified tables via Conventional Path ...
    EXP-00011: SYSADM.RTX does not exist
    Export terminated successfully with warnings.

  • Table does not exists.

    I M TRYING TO TAKE EXPORT OF A TABLE BUT I M GETTING ERROR THAT TABLE DOES NOT EXISTS BUT ACTUALLY TABLE EXISTS... PLEASE SUGGEST Y I M GETTING THIS ERROR.
    Connected to:
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    With the Partitioning, Oracle Label Security, OLAP, Data Mining,
    Oracle Database Vault and Real Application Testing options
    SQL> select table_name from user_tables where table_name='CSCNF';
    TABLE_NAME
    CSCNF
    SQL> select object_name,object_type from user_objects where object_name='CSCNF';
    OBJECT_NAME OBJECT_TYPE
    CSCNF TABLE
    SQL> exit
    Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    With the Partitioning, Oracle Label Security, OLAP, Data Mining,
    Oracle Database Vault and Real Application Testing options
    [oracle@~]$exp musr/musr file=tab.dmp tables=CSCNF
    Export: Release 11.2.0.1.0 - Production on Thu Jun 17 16:28:51 2010
    Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
    Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    With the Partitioning, Oracle Label Security, OLAP, Data Mining,
    Oracle Database Vault and Real Application Testing option
    Export done in US7ASCII character set and AL16UTF16 NCHAR character set
    server uses WE8ISO8859P1 character set (possible charset conversion)
    About to export specified tables via Conventional Path ...
    EXP-00011: MUSR.CSCNF does not exist
    Export terminated successfully with warnings.

    [oracle@~]$sqlplus / as sysdba
    SQL*Plus: Release 11.2.0.1.0 Production on Thu Jun 17 16:40:48 2010
    Copyright (c) 1982, 2009, Oracle.  All rights reserved.
    Connected to:
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    With the Partitioning, Oracle Label Security, OLAP, Data Mining,
    Oracle Database Vault and Real Application Testing options
    SQL> conn musr/musr
    Connected.
    SQL> sho user
    USER is "musr"
    SQL> select table_name from user_tables where table_name='CSCNF'
      2  ;
    TABLE_NAME
    CSCNF
    SQL> exit
    Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    With the Partitioning, Oracle Label Security, OLAP, Data Mining,
    Oracle Database Vault and Real Application Testing options
    [oracle@~]$

  • Web Service error: User [oc4jadmin] does not exist in system

    Attempting to create a HelloWorld Web Service (WS) using JDeveloper 10.1.3 and deploying to OAS10g 10.1.3. Create the WS, deploy to OAS10g, test the Service from OAS10g - not a problem!
    Then enable WS-Security and specify a cleartext password - ONLY. Then when test it from OAS10g I get the following output (HTTP Analyzer): User [oc4jadmin] does not exist in system.
    Which is patently false as I login with oc4jadmin!
    Anyone have an idea what is going on here???????
    THANKS - Casey
    P.S. Thanks in advance for any help

    Casey, see if either of these help:
    Securing a Web Service Client Using WS-Security (viewlet)
    http://www.oracle.com/technology/products/jdev/101/viewlets/101/xesecureunitedloanclient_viewlet_swf.html
    Securing Web Services using JDeveloper and WS-Security
    http://www.oracle.com/technology/products/jdev/101/howtos/securews/index.html
    Oracle JDeveloper 10g (10.1.3) Documentation: Working with Web Services
    http://www.oracle.com/webapps/online-help/jdeveloper/10.1.3/state/content/navId.4/navSetId._/vtAnchor.CJAEHFJD/vtTopicFile.adfdevguide%7Cweb_services%7Ehtm/

Maybe you are looking for