Table for document type Number Range interval

Hi,
I want to know the number range interval for document type in the production system but I do not have authorisation for SPRO in the prd system.
Kindly let me know the table name to check this number range interval for the document type.
Table T003 stores only the number range and not the interval.
Thanks
Suresh

Hi,
The table which has document types is T003 but the number ranges are stored in a Structure IRDP. The number ranges are maintained directly in the production system.
regards,
radhika
Edited by: kolipara radhika on Aug 25, 2008 6:01 AM

Similar Messages

  • For object RV_BELEG , number range interval  does not exit

    I am receiving this error when trying to generate billing document type L2 for a newly created company code.
    Exisiting company codes are generating billing documents so obviously this is to do with a company code related definition.
    Any thouhgts ?
    -Mark

    Please check if the error is
    "For object RV_BELEG , number range interval does not exit"
    "For object RV_BELEG , number range interval <b>10</b> does not exit"
    10 used as an example here you may be getting any 2-digit alpha-numeric value in stead of 10.
    Also Check
    If you are using
    Include program : RV60AFZZ
    Routine: USEREXIT_NUMBER_RANGE
    If so then for each plant you have assign a number range for each billing type (L2- here).
    Thanks,
    Ashish

  • For object XABBELEGNR , number range interval  does not exist OMJ6

    Dear all
            I want to enter only the value between 1 to 5 in GR/GI Slip No for T.code Mb01,but it is not allowing it is showing as For object XABBELEGNR , number range interval  does not exist OMJ6.
    Kindly let me know how to proceed,so that i can enter value between 1 to 5 in that field.
    regards
    M.Chandra mohan

    hi
    u just go to tcode omc1.
    activate gr/gi slip for plant
    then create number range group code and assign it to plant ,storage location and movenent type combination.
    Then u can create the intervals thru OMJ6.
    Hope it helps
    rewrad if useful
    Rohit

  • Document types - number range

    Hi Experts,
    I have following query.
    I am doing project  which has three company codes and each company code has a manufacturing plant.
    I have created document types for P.R., P.O.,Contract,Scheduling agreement and assigned the number ranges for the same.
    Client requires that for each plant whenever any document is created in the system, it should start with the initial number and it shouls appear in sequential manner. Ex. if a P.R. is made for three plant the in each plant the P.R. number should be 1000000.
    It should not be 1000001,1000002,1000003.
    Please guide me how the same can be achieved for document types of P.R., P.O.,Contract,Scheduling Agreement etc.
    I there any customization for the same.
    Thanks & Regards,
    Aditya.

    A . Aaditya wrote:
    Hi Experts,
    >
    > I have following query.
    > I am doing project  which has three company codes and each company code has a manufacturing plant.
    > I have created document types for P.R., P.O.,Contract,Scheduling agreement and assigned the number ranges for the same.
    >
    > Client requires that for each plant whenever any document is created in the system, it should start with the initial number and it shouls appear in sequential manner. Ex. if a P.R. is made for three plant the in each plant the P.R. number should be 1000000.
    > It should not be 1000001,1000002,1000003.
    >
    > Please guide me how the same can be achieved for document types of P.R., P.O.,Contract,Scheduling Agreement etc.
    > I there any customization for the same.
    >
    > Thanks & Regards,
    >
    > Aditya.
    Hi,
    Do you mean, for each plant the starting no range should be 100000? pls clarify
    Shiva

  • Document types, number ranges in ECC 6.0

    How r u.
    I have a question in ECC 6.0. When we are defining document types and document number ranges what is “Define Document types for entry view in a ledger”, “define document types for general ledger view” and “Define Document Number Rangers for General Ledger View”
    Please explain clearly
    Thanku

    In New GL functionality introduced by SAP we have the concept of Leading Ledger (used by Classic GL or ledgers used before ECC) and Non Leading Ledger (multiple ledger concept).So the Document Type for these 2 Ledger types needs to be defined seperately
    For Classic GL or Ledger used before ECC use the : Define Document Type for Entry View (Classic GL means GL Functionality available in R/3)
    For Non Leading Ledger use: Define Document Type for Entry View in Ledger or Define Document Type for General Ledger View (Applicable only for New GL Functionality)
    Similarly the above classification is also applicable for Document Number Ranges.

  • Document Type & Number range

    If there is a place where I can list the Document type and the corresponding Number Range for that Document type?
    Currently I have to gointo OBA7 for each document type to get the respective document number range
    Thanks
    YV

    Yes OBA7 is right ,please choose the print option then you can see all of the settings for all doc types , from there you can print or export out for reporting

  • Billin document Types Number range

    Where is assign Billing document number range.

    @ AP / Eduardo
    It is really regret to note being an old members of the forum and crossed over 5000 points, still both of you are encouraging a basic question which should never be encouraged as per forum rules and I am sure, both of you are aware of this.  Please dont deviate the forum rules and encourage the OPs to search first.
    G. Lakshmipathi

  • Billing document( T code:VF01) number range interval error

    Hi Guru,
    While Creating Billing document i.e (VF01) I got an error. But apart from that I already maintain the Number range Interval in FBN1 as well as SNUM. But that number ranges I assigned in Billing document type also. Then also facing the same error.
    So please give me some solution Asap
    Regards,
    Sukdev.

    Dear Neel,
    Please find the Screen shot for VN01
    and please find my Sales document type Number range assignment.
    and please find my billing document type number range assignment.
    Regards,
    Sukdev.

  • Object RV_BELEG  number range interval 01 does not exist

    Hi Gurus,
    I need suggestion or solution to solve my problem when creating sales order(standard order) from VA01 transaction.
    Error Descriptio and Message:
    For object RV_BELEG , number range interval 01 does not exist
    Message no. NR751
    Diagnosis
    The database table NRIV has the delivery class 'C', i.e. the SAP default settings are only in client 000.
    Procedure
    Create the missing number range interval in customizing.
    Transaction code:
    Reporducing the error:
    Screen flow: VA01 Intial Screen Input
                          Order Type: SD  'Subs.Dlv.Free of Ch'.
                          Sales Org : 
                          Enter.
                          Next Screen: Click on "Complete Dlv" push butoon.
                          It will take to next screen go with "SAVE" option.
                          Iam getting an incomplete Delivery want to edit.
                          Go with "EDIT" and give Input in "ORDER REASON" drill down option.
                          select any one option and go with arrow symbol in the menu "EDIT NEXT DATA" or F5.
                          Provide Input In "Customer Group" drill down option select any one option from it.
                          Again go with arrow symbol in the menu "EDIT NEXT DATA" or F5.
                          Here iam getting an status "Document is complete".
                          Click on "SAVE" option.
    Here status message error showing: "For object RV_BELEG , number range interval 01 does not exist".
    This is the issue occuring with me while creating Sale Order from VA01.
    help me if any one have know solution or suggestion to solve error.
    Tnks & Rgds
    Bhaskar

    This because of the missing SD Document Number Range.
    You can check this in tcode SNRO for object RV_BELEG.
    Ask your SD Consultant to Change the number range assignment  or create that missing 01 number range number object.
    This will solve your problem,
    Regards
    Karthik D

  • Problem in  Number range Interval in VF02

    Hi All,
         I am using Number range USEREXIT for invoice creation- VF01.
    So, while creating invoice, userexit will trigger, as per our logic provided,system generating numbers as expected.- which is working fine.
    Where as, in VF02, transaction , i was trying to release invoice to Accounting,
    system prompts with the below error message.
    Fyi, in my invoice doc type: Number range- interval-19, which has numbers mentioned in the error message below:
    am expecting, that when i release invoice to accounting from VF02 transaction, system triggering number range from invoice doc type,- But I dont understand, why it is triggering number range interval again, for which number is already createed in VF01
    Error Message:
    Incorrect doc.no.: 9003000002. Select document number between 0090000000 and 0094999999
    Can someone, have any inputs??
    Thanks in advance

    Hi,
    You can make use of exit userexit_number_range  inside RV60AFZZ.
    Regards,
    Babul.

  • Error in billing number range interval.

    Hi,
    I created a new billing type. I assigned the number range properly. But at the time of billing document generation, system is throwing a message "For object RV_BELEG , number range interval  doesnot exist". I have checked in 'SNRO' against the object type 'RV_BELEG' , the number range interval that I have assigned for the new billing type is existing there. Still the error is coming.
    Please suggest what needs to be done.
    Thanks & regards,
    Rupam.
    Edited by: RUPAM KR SEN on Mar 21, 2011 10:46 AM
    Edited by: RUPAM KR SEN on Mar 21, 2011 10:47 AM

    Hi Samit,
    Thanks a lot for your suggetion. There is an user exit but with different program name in our system. Due that user exit the  customizing done by me was not working properly. The exit has been deactivated and now it's working fine.
    Thanks & regards,
    Rupam.
    Edited by: RUPAM KR SEN on Mar 21, 2011 1:56 PM

  • Anybody ever created multple PO doc type/number ranges in extended classic?

    I have searched this forum, and found plenty of useful threads which would help me determine different document types/number ranges for back-end purchase orders in a classic scenario. (And I have done something similar many years ago on a classic EBP 3.0 implementation)
    However, I have a customer who has an SRM 5 extended classic implementation, and who (Based on certain simple criteria) requires a different PO number range to identify certain types of indirect orders. (They also have direct materials procured using doc type ECDP, but that's not relevant to this requirement)
    This would obviously have to apply to the local PO in SRM, as well as the backend ECC PO.
    It would also need to be derived for orders created automatically via approved shopping carts, as well as those orders that are created via sourcing.
    I've copied ECPO via define transaction types IMG step, as well as assigned a new number range.
    Just to test, I've also added the second doc type in the BSA attribute for a particular test user - just initially see if it was possible to manually choose when creating a PO in sourcing. However, I could only get ECDP and ECPO.
    I have looked at various BADIs to see if I can determine doc type or number range somewhere in the PO creation, but as far as I can see, they either:
    - Seem to apply only to the object type (PO, requisition, reservation etc) rather than the transaction type within that object.
    - Or look like they are too late in the process to influence the doc type and number range (BBP_DOC_CHANGE_BADI?) ... which doesn't seem to have those doc type or PO number fields available anyway
    - Or I doesn't seem to be trigerred at all when turning requirement into Po and ordering via sourcing. (tried break-point & endless loop in implemnetation of BBP_CREATE_BE_PO_NEW, but nothing happened. In any case the PO number was alreadya ssigned)
    If anybody has ever managed this before, or can tell me that I am definitely barking up the wrong tree, it would be gratefully appreciated. The document type is actually lesss important than the different number range... and was really just an attempt to trigger a different number. I'm starting to think that this sort of thing may only be possible in a classic implemntation.
    What I need ideally, would have been some kind of 'local PO' equivelent of the BADI that enables you to determine transaction type for a bid. 
    Regards,
    Vince
    Edited by: Vincent White on Dec 6, 2010 5:13 PM

    Hi. Not sure on this, but I can tell you that with extended classic it is BADI BBP_ECS_PO_OUT_BADI that is called for the backend PO instead of the CREATEPO_BACK BADI.
    You can have a look in BBP_ECS_PO_OUT_BADI and see if that helps?
    Don't think it will influence the PO in SRM at all though.
    Have you tried the number range / grouping BADIs? They definitly work for changing the number range for classic POs.
    Regards,
    Dave.

  • Error :number range interval 01 does not exist

    Hi,
      i created a number range object Z_REPORTID in SNRO for autogenerated ids and later used the function module NUMBER_GET_NEXT. After execution i got the following error.
    For object Z_REPORTID, number range interval 01 does not exist
    Message no. NR751
    Diagnosis
    The database table NRIV has the delivery class 'C', i.e. the SAP default settings are only in client 000.
    Procedure
    Create the missing number range interval in customizing
    Please help me to trace this out.
    Thanks,
    Anila

    Hi
    AFter creating the number range interval in SNRO you must TRANSPORT the interval. In the first screen --> Interval --> Transport.
    Did you perform that step?
    If you did that it should work well. Itried the same now and it is working fine.

  • Getting number range interval for document type

    Hi All,
    My requirement is to display number range interval for any docnument type in SD.
    I will elaborate my req. clearly.
    We can see document type of SD in TVAK table. If we give document type for ex. ZOR the we will see number range internal assignment (NUMKI). The complete number range we can search through transaction VN01 through NUMKI value. But I didnt get any table to relate NUMKI or Sales document type and internal number range.
    Please help me in searching database table to relate Document type or NUMKI and internal number range.
    Regards,
    Suresh.

    Relation is as below:
    TVAK --> AUART = "Sales Document Type"
    NRIV --> OBJECT = "RV_BELEG" and
             NRRANGENR = TVAK-NUMKI
    Alternatively you can use FM: NUMBER_GET_INFO with the Number Range Number and Object to extract Intervals.
    Regards
    Eswar

  • How to change number range for document type ?

    Dear All
    Experts
    How to change the number range for document types for entry view? I am trying to change the number range for all document type as per defined ranges in FBN1, but at the time of saving document type and number range the system is throwing error message as 
    Doc. type C1: Number range 07 is used for ledger L6 with doc. type AE
    Message no. FAGL_LEDGER_CUST093
    I have defined a leading ledger in system too with these settings
    1)     Define ledger for accounting.
    2)     Defining currencies for it.
    3)     Defining ledger group for the same.
    4)     Defining accounting principles
    5)     Assignment of principles to leading ledger.  
    Are there any extra settings required for leading ledger settings?
    I have some doubts those are :-
    How document types defined at ledger level?
    How to define them at leading ledger level?  (Like my case)
    Focus on this will be appreciable.
    Regards,
    Sharvari Joshi.

    hi ,
    The document numbers in the leading ledger and the non leading ledgers should be in sync, they should not have any differences, so incase you are trying to change the number range for C1, the  number range 07 is already been assigned to doc type AE. i guess you have cant use 07 for C1. may be you can try out with an other number range. check this and let me know if you are able to do this.
    coming to
    1.How document types defined at ledger level?
    2.How to define them at leading ledger level? (Like my case)
    Ans 1. please try defining document types for entry view in a ledger.
    path : SPRO- financial accounting new -financial accounting global settings new - document -document types -define document types for entry view in ledger.
    upon prompt enter the ledger and go ahead creating the number ranges for the document types.
    Hope this helps.
    Regards
    amrutha

Maybe you are looking for