Table for queries and their descriptions under 4.6C

Hello experts,
does anyone know the above mentioned tables. Unfortunately V_COMPDIR_COMPIC and
-RSZCOMPDIR
-RSZCOMPIC
-RSZELTTXT
-RSZELTDIR
don´t seem to work under 4.6C.
Thanks in advance.
Regards,
F.H.

HI,
Check the table RSZCOMPDIR.
Also RSZELTTXT and RSRREPDIR
Hope this helps...

Similar Messages

  • Table for queries and their descriptions!

    Hi,
    Can anybody disclose me table name for queries and their descriptions?
    Raj

    HI,
    Check the table RSZCOMPDIR.
    Also RSZELTTXT and RSRREPDIR
    Hope this helps...

  • Table listing queries and their time characteristics

    Is there a table that contains the name or ID of the queries and the time characteristic InfoObjects or variables used in the queries?
    Want to get a listing of time characteristics used in the queries quickly and in table format.
    Time charateristics either for filters, variables, or free characteristics.

    Hi SAM,
    Goto SE38 and run this program ...
    RSRQ_QUERYDEFINITION --Execute it.
    Give the Query Name and Execute.
    You will fet the List of all the varibles used,but they will not be in table format.
    Rgds
    SVU123

  • Table for Component and Component Description in CS03

    Hi,
    I want to know the table associated with CS03 Transaction.I mean from which table we can get component and component description. And Is there any way that we can pull all the characterstic Values for that particular component.
    Thanks in advance

    Hi
    see the tables
    MAST
    STKO and
    STPO
    all related to BOM
    Bill of materials
    to pull all characteristic values
    use tables CAWN and AUSP or
    Use the following BAPI's:
    BAPI_OBJCL_GETDETAIL
    or use the fun module:
    CLAF_CLASSIFICATION_OF_OBJECTS.
    Regards
    ANJI
    Message was edited by:
            Anji Reddy Vangala

  • Table for view and its description

    Hi,
    Is there any table which can have the view and its description in R/3?
    These views are primarily used in Generic extractor Definition!
    I am preparing a list of the views used in Gneric extraction and for that i need the description of the view in question!
    Raj

    Hi,
    I have nearly 1200 Views .
    It is just not possible to enter each entry of the view and to know the description manually.
    I know that we can find the description in SE11. but if there is a table which can have the viewid along with the description  my job is lot easiler.
    Any ideas?
    Raj

  • TABLE FOR DIVISION AND ITS DESCRIPTION

    Dear Mates,
    My client wants to add a Division and its Description to the Z report -Daily Collection Report from Customers.
    Can anybody help out for table name and its fields for Division and Description
    Thanks in anticipation
    Subbu

    Hi,
    I guess your question is about divisions within a Sales Organization. The related tables are listed below:
    TSPAT - organizational unit: Sales Divisions (Text)
    TVTA - Organizational Unit: Sales Area(s)
    TVKOS -Organizational Unit: Divisions per Sales Organization
    Hope you find the information relevant and useful. If so, please close the message.
    Muraleedharan.R

  • Which table stores field names and their description?

    When I go to se11; I can get information about a table; its field names and field description.
    How can I access same information using an ABP Program? I have a third party tool which connects to SAP; it can pull data from any SAP Table or view. I do not know which table or view stores information displayed in SE11.
    Thanks a lot.

    Hi zigzagdna,
    The field names and their description are strored in table DD03L and DD03T.
    SAP DDIC dictionary informations are generally store in DD* tables. You can search this kinds of DD* tables in SE11 using F4 search help.
    With Best Regards
    Julia

  • Table for Customer and vendor open balance on a key date

    Dear All,
    Can anyone please let me know Table for Customer and vendor open balance on a key date. We are developing one customized report.
    I have checked with the below table :
    Customer-KNC1, KNC3,BSID, BSAD
    Vendor-LFC1, LFC3, BSIK, BSAK.
    But these are not working properly for all customers and vedors. Also, in open items, there are items with clearing documents.
    Plesae let me know, how to go for it.
    Please suggest.

    Hi
    Use BSID and BSIK for open items
    And pass company code, year and from date and to date range in Posting date selection option
    Reg
    Vishnu

  • Need table for customer and vendor carry forward balance

    Hi,
    I need to fetch the carry forward(opening) balance for GL, customer and vendor account for my report.
    I have table which contains c/f balance for GL accounts which is "GLT0" and now looking for a table for customer and vendor accounts.
    Please let me know if anyone have idea in which table i can get the c/f balance for customer and vendor accounts.
    Thanks in advance.
    Regards,
    Swati

    Hi Gurus
    The requirement from the client side in my case is to have opening balance in Tr code ZFBL1n, ZFBL3N and ZFBL5N.
    Now, from the above thread i got the Tables where i could find the Vendor and Customer Opening Balance but i also want Opening Balance for GL.
    and my 2nd query is how to get these opening balance in Z report, at Header Level.
    Thanks and Regards
    Dnyanesh

  • How to find R/3 table  for FI and PS Datasources

    Hi,
    Can anyone tell me that how can we find SAP tables for FI and PS datasources in BI. Please provide information as it is urgent. Points will be assigned
    Thanks
    Shanthi

    Hi,
    To find DS assigned to a table.
    How to find the Datasources for the given table names ?
    How to find the Datasources for the given table names ?
    To find Tables assigned to a DS.
    USe Extractor Checker RSA3. Execute ST05 (activating SQL Trace), switch on the trace and execute the extractor checker. Once the extractor checker presents the results
    switch off trace. The clcik on Display trace and you will see all the tables that were hit by the extractor checker to
    retrieve data and present it to you.
    Note: Set the break point in the Extractor Function module.
    View the ST05 Extended Trace list. The Object name shows the Tables accessed.
    Thanks,
    JituK

  • Source tables for forms and tabular forms must have a primary key.

    Why does HTML DB 2.0 return the message
    "Source tables for forms and tabular forms must have a primary key."
    when trying to generate a "Report and Form" page based on a view defined like "create view <applicationschema>.a as select * from <sourceschema>.b" ?
    It should be possible for HTML DB to "see" that the table "<sourceschema>.b" already has a primary key.
    bw - Christian

    Christian,
    In the create application wizard, when creating form or tabular form pages, you can only use tables with primary keys, and not views, because that wizard is automatically deriving the primary key from the table definition. If you want to build forms on views or tables without a primary key, you need to use one of the create form wizards while working on an existing application. Those wizards allow you to pick your own column as a primary key column.
    Regards,
    Marc

  • Taking long time filling the setup tables for sales and shipment

    Hi ,
    I am trying to fill the setup tables for sales and shipment and it is taking lot of time .
    It took 16 hours just to bring 6 months of  sales history  data in the test environment .
    Cn anybody help on this issue why it is taking that much of time ...
    I am trying to  load the sales data from R/3 into APO-BW from 2005 to 2007 .......
    It is taking 16 hours to fill the data for only 6 months .

    Hi,
    1. delete data and refill the setuptables again by spliting to several small pieces.
    2. compare the data. wht is the last Document numner in RSA3(Maximum one). Start from Maximum one. may be bit complex approch.
    you need to check with PSA and base tables.
    keep one thing in your mind you need to check againest MSEG and BSEG only. noy BKPF and MKPF.
    correct if i'm wrong.
    either refill or create a user exit to avoid duplicae records(you should have very good understanding of data, it will lead to inconsitent data for delta records).
    User exit not a good solution. it's one possibility.
    ****Assign Points If Helpful****
    Regards,
    Ravikanth

  • Thru OEM get list of queries and their schemas that accessed my objects

    Hi,
    I have a list of objects on my schema and i need to track the list of sql queries by different users that accessed by object during this time period.
    i haven't enabled any auditing yet.
    is there any way i can get that list of queries and their schemas that accessed those particular objects during a particular time period through OEM.
    Can someone guide me please.
    Thanks in advance.
    Philip.

    create a name property in your class and assign a name property to your instances (either in the contructor) and/or using getters/setters.  (you'll need a getter anyway.)

  • Table for terms and conditions

    what is table for terms and conditiions??
    regards
    jyoti

    Hi Jyoti,
      If u are looking for the payment terms then the table T052 and T052U.
    Regards
    Kiran Sure

  • Base tables for aggragates and Multiproviders

    Is  RSDICMULTIIOBJ the base table for Multiproviders?
    What is the base table for Aggragates and units?

    Multiproviders
    RSDCUBEMULTI 
    RSDICMULTIIOBJ
    Aggregates
    RSDDAGGREF
    RSDDAGGRT
    RSDDCVERREPAGGR
    RSDDAGGR    
    RSDDAGGRCOMP
    RSDDAGGRDIR 
    RSDDAGGRDIR_M

Maybe you are looking for