Table for text at header and item level.

Hi gurus,
I have typed some text at the item level (Texts TAB for the item). In which table can i find this data. The table STXL does not contain the data thats been entered. Please help me with some information.
Regards,
Udaynath.

Uday,
UsE Function Module READ_TEXT or  try with Table STXH..
Reward IF THIS HELPS..
Regds
MM

Similar Messages

  • Tables for Purchase Requistion Header and Item Texts

    Hi,
    In which Tables does Purchase Requistion Header and Item Texts will be stored.
    Thanks in advance

    Not sure , you can try with T166K , T166P

  • Email Vendor and PO text at header and Item level

    Hi,
    I am using SRM 3.0,ECS.
    1.I want to search all the vendor having email address mentioned(not having the blank in the std comm field in table ADR6).
    2.When I am creating SC with special character (in the line item description and SC name description,attachment description) and PO is created automatically but in the BIW because of these sp characters reports are not getting published.
    How can I restrict the special character entries in the SC and then POs.?(so that users can not put sp characters in the SC line itmes,Texts,Attachment descriptions)
    Brgds/Gopesh
    Edited by: Gopesh Pandey on Mar 6, 2008 10:53 AM

    Uday,
    UsE Function Module READ_TEXT or  try with Table STXH..
    Reward IF THIS HELPS..
    Regds
    MM

  • How to create a new field for Q3 - QM notification in Header and item level

    Dear All,
    l
               Sub: How to create a new field for Q3 - QM notification in Header and item level
    Ref. the link --> Quality Notification
    We want to create a new field in header level and item level.
    As per the thread the solution is given below.
    In the IMG Config: Quality Management -> Quality Notification -> Notification Types -> Define screen areas for notification types Then Choose 'Define screen areas' Then Click on 'New entries' button Now, select the relevant Notification Type and click in 'Enter'. Select the 'Iten Cases' register and remember to setup the Tabstrip Header, Icon, etc. Set the 'Tabstrip active' flag. Then Save.
    Quality Notification -> Notification Types -> Define screen areas for notification types
    WE ARE UNABLE TO FIND IN CUSTOMIZATION PATH --> DEFINE SCREEN AREAS FOR NOTIFICATION TYPES.
    Please help.
    Question No. 2 :
    THE REQUIREMENT IS GIVEN BELOW.
    We want to hide the field in Q3 - QM Notification
    In header --> Reference tab --> Item (sub heading) --> "DEFECT LOCATION" FIELD TO BE ELIMINATED (HIDE)
    Ref the link --> Quality notification
    The solutiion is given below.
    Hi Sami,
    We can hide the collumns using the Transaction OQM1 and Program Name SAPLIQS0.
    Lets say Defect location need to be hidden, the field TXTCDOT need to have the radio button HIDE.
    Hope this will suffice your requirement.
    Kindly ask me if you need any other details.
    Thanks & Regards,
    Srinivas.D
    Hi Sami,
    We can hide the collumns using the Transaction OQM1 and Program Name SAPLIQS0.
    Lets say Defect location need to be hidden, the field TXTCDOT need to have the radio button HIDE.
    Hope this will suffice your requirement.
    Kindly ask me if you need any other details.
    Thanks & Regards,
    Srinivas.D
    By double clicking the "DEFECTIVE QUANTITY (EXTERNAL), WE COULD NOT GET --> field TXTCDOT .
    Plese do the needful.
    We are using ECC6.0 Ehp3 and Ehp4.
    With Best Regards,
    Raghu Sharma

    Dear Pushpa,
    Transaction Code :SHD0 is working fine.
    Please accept my sincere thanks for your sharing your Knowledge.
    I am able to fulfill my
    Regarding the enhancement, I have not tried.
    Once I will complete, I will award the fulll marks to you.
    With Best Regards,
    Raghu Sharma

  • Sales order condition change for Header and Item level..

    Hi Gurus,
    My requirement is as below..
    Business wants to create new sales order from reference.. While creating slaes order fron reference , need to populate header/Item level condition tab data from originally paid by the invoice for that refence sales order not from refence sales order condition price.
    I would like to how to bring this one, any user exit or copy control and any VOFm routine need to populate this kind of requirement.
    Any one have any idea please let me know.. It very urgent, give reward points for right solution..
    thanks,

    Hi,
    Here are the answers to your question
    > Is it possible to add/change condition types on the sales order (header and item level) for which invoice has been created already?
    I mean is it possible to add some surcharge condition to already invoiced order and than as result debit memo?
    The answer is No. You cannot add or change the condition once it is invoiced.
    > And one more question : Are there some time restrictions when debit/credit memo can be created? (I believe not, but I would like to have this confirmed, as I am not SD expert.)
    The answer is No again. There is no time restriction and you can create debit or credit memo immediately when the invoice is released to accounting.
    Hope this helps
    Thanks
    Mukund S

  • How to find the header and item level status of a CRM contract ?

    Hi,
    Few questions
    A. How to find the header and item level status of a CRM contract ? My req is to select all the contract line items which are in CLOSED status.
    B. How to get the BPs associated with a contract ?
    Anyone have the list of CRM tables and the relation amongst them. Please mail me in [email protected]

    CRMD_ORDERADM_H     Contains the Header Information for a Business Transaction.
    Note:
    1.     It doesn’t store the Business Partner
           responsible for the transaction. To 
           get the Partner No, link it with
           CRM_ORDER_INDEX.
    2.     This table can be used for search
           based on the Object Id(Business
           Transaction No). 
    CRMD_CUSTOMER_H     Additional Site Details at the Header Level of a Business Transaction
    CRMD_LINK     Transaction GUID set for all the Business Transactions
    CRMD_ORDER_INDEX     Contains Header as well as Item details for a Business Transaction.
    Note:
    1.     It doesn’t store the Business 
          Transaction No (Object ID).
          To get the Business Transaction No  
          link the table with
          CRMD_ORDERADM_H
    2.   This table can be used for search
          based on the Partner No
    CRMD_ORDERADM_I     Stores the Item information for a Business Transaction. The scenarios where we have a Contract Header and within contract we have Line Items for the contract, this table can be useful.
    E.g. Service Contracts
    CRMD_CUSTOMER_I     Additional Site Details at the Item Level of a Service Contract
    Pl.reward points.......

  • Checkbox in header and item level records.

    Hello Freinds,
    I have a requirment in which I need to display checkboxes in front of header as well as item level records. I am trying to make a copy of standard transaction VL37. This transaction uses the REUSE_ALV_HIERSEQ_LIST_DISPLAY for displaying header and item level data. I debugged and found that in the alv layout there is a field with name box name. If we pass the name of header internal table to that field then we can get checkbox in front of header level records and if we pass item level internal table name then it shows the checkbox in front of item level records.
    Can anyone provide some possibility of adding checkbox for both header and item level records while using the same ALV FM.

    Hello Harsh,
    I am also kind of facing the same issue. I have used the FM REUSE_ALV_HIERSEQ_LIST_DISPLAY for ALV display. And I need to add checkbox at item level.
    I have tried to add checkbox through field catalog. Following is the code I'm writing.
    l_wa_fieldcat-fieldname = l_c_flag.
    l_wa_fieldcat-tabname   = l_c_item.
    l_wa_fieldcat-checkbox  = abap_true.
    *l_wa_fieldcat-edit_mask = abap_f.
    l_wa_fieldcat-edit      = abap_true.
    l_wa_fieldcat-key       = abap_true.
    l_wa_fieldcat-seltext_m = l_c_flag.
    APPEND l_wa_fieldcat to em_it_fieldcat.
    But in this case the checkbox appears in disabled form.
    Can you please help? Could you be a bit elaborate on your answer i.e. the code snippet? Many thanks.
    Regards,
    Debapriya

  • BAPI_SALESORDER_CREATEFROMDAT2, Header and Item Level Ship-to

    I have a situation where I want to have different header and item level ship-to accounts on a sales order. When I use the BAPI_SALESORDER_CREATEFROMDAT2 to create the order by passing the Ship-to for header and Item in order_partners table, the header ship-to is not updated.
    This works fine if the header and item level ship-to are same.
    Any ideas.

    Hi Amit,
    put a breakpoint at the BAPI and check your PARTNERS table
    e.g. in the case, i am using iterms partner for line 10 & 20 that is different to the header table (000000)
             PARTN_ROLE PARTN_NUMB ITM_NUMBER TITLE           NAME
        1     AG        |EDICUS         |000000    |               |                         <
        2     WE        |DODGE         |000000    |               |                         <
        3     WE        |EDICUS         |000010    |               |                         <
        4     WE        |RWCUS         |000020    |               |                         <
    if your table is not like this , it won't work
    otherwise, post the relevant code and we can check
    kind regards
    Paul Quinn

  • Delivery tolerance at header and item level in sales order

    Dear All,
    My client wants to maintain delivery tolerance at both header and item level. NOTE: The tolerance at sales order header is different than the delivery tolerance at sales order item.
    eg if i maintain 3% plus and minus tolerance at item, the header level tolerance can be 2%.
    Also if there are more than 1 line items, the system should give warning message, when it finds that the delivery tolerance at item level can be maintained but that of the header level cannot be maintained and vice varsa.
    Awaiting an early help and thankful for the same in advance.
    Regards,
    Avnesh Kamdar

    Hi Avnesh,
    Delivery tolerance can be made in the customer master,sales org data ---delivery tab.
    Delivery tolerance is always at item level.
    Reward points if it helps.
    Regards
    Karan

  • Different division at header and item level in Order

    Hi Gurus,
    i am facing this issue where while creating quotation in CRM i entered sold to party, selected the org data ( OA/DI/OP ). i entered the product with quantity. now at item level in Organization tab my sales area is showing as ( OA/DI/01). system is picking the division maintained for product which is 01) so division is different at header and item level. i need the header division to be used at item level as well.
    how can i achieve this?
    Thanks and Regards
    Sudhir Grover

    Hi Sudhir,
    Make sure the settings in the SPRO>CRM>Master Data>Products>Special Settings for Sales Operations--> Define Division settings is activated with Header Div. Act.
    Also check the details in the IMG activity documentation for define division settings.
    Hope this helps.
    Regards,
    Chandrakant

  • Same condition type on header and item level = printing problem

    Hi
    I have a customer using some condition types on both item level and header level in quotations, orders, invoices ...
    In the pricing procedures it is customized (V_T683S-DRUKZ) that the conditions must be printed on header level (that is at the bottom of the documents).
    My job is to make the Smartform to print the documents, and I want it of course to be as close to SAP standard as possible.
    SAP standard will print these conditions on header level even if the conditions are at item level, but my customer wants the conditions created on header level to be printed on header level and conditions created on item level to be printed on item level.
    I'm no pricing expert, so my question is:
    Will it be fair if I tell the customer that using the same condition types on header and item level is bad practices - or at least bad karma?
    Best regards
    Thomas Madsen Nielsen

    Hi Shiva Ram and Madhu
    I have no problem understanding header vs. item conditions, so I really don't see anything in oss note 876617, that is relevant in this case.
    Madhu - I do not agree that everything is fine. My issue is that I want to stick as closely to SAP standard customizing as possible. In SAP standard customizing of a condition type you can use the flag V_T683S-DRUKZ to determine if the condition should be printed on header OR item level - you can not choose both header AND item level.
    I have a SAP standard smartform using two functions modules for reading header and item conditions. RV_PRICE_PRINT_ITEM and RV_PRICE_PRINT_HEAD. These function modules are based on the DRUKZ customizing flag and a condition marked for printing on header level will be supplied by RV_PRICE_PRINT_HEAD even when the condition is on item level.
    My point is: SAP standard customizing does not support printing of same condition on both header and item level. I can of course write tons of code to work around this problem, but that would be bad practices

  • How can we revise the pricing both at header and item level of sales order?

    Dear All,
      Now there's one issue of the pricing to me. i want to revise the pricing both at header and item level of sales order. but after i finished the cutomize and tested it, it's more different as i thought. i found that the pricing can revise at the one side only,for example, if i revise the pricing at item level and it's grey and can't be revised at the header. on the other hand, it's the same result what's happened at item.
      So, in my opinion, we can't revise the pricing both at header and item, right? if not, please give me more advices and teach me how to solve the problem. thanks a lot.

    Dear Lakshmipathi,
      Thanks a lot for your kindly and useful answer for me and I learn more for the pricing technology.
      I didn't notice the way that you reminded ago therefore I also saw the button at the condition tab. And your suggestion makes me know more.
      And I had tested the way that you said, I met with a question. Below is my opinion for my testing.
      I had created one SO and the pricing was $10, then I revised the pricing from 10 to 15 by VK11. It can't be updated automatically at SO and I must update it manually by clicking the "Update" button. This is OK for my testing, but I have another question to disturb you for the use of "Active" button. When I click the button and nothing is responsed, it's quite different what you said. So, please give more detail for the Active button. Thanks a lot.

  • Frieght should appear in both header and item levels

    Hi SAP gurus,
    while doing the Sales Order transaction(va01),  frieght should appear in both header and item levels,  how can we configure in SAP.
    Thanks in advance.
    Sathya........

    Hi Sathya,
                   You can maintain the  Fright condition type (KF00) in your pricing procedure and maintain the condition record for that as per your requirement, or you enter manually at Sales Oreder it will come at header and item level.
    I hope it will solve your problem,
    Regards,
    Murali.

  • Printing of Condition value at both header and Item level

    Dear Sap Gurus,
    Please any body tell me how to print the condition value at both header and at item level in PO print out. ie.  I am using RA00 at both item and header level and i want to print this value at both header and item level.
    Thanks and Regards,
    Patil

    Hi,
    Please check with abaper is he calling the function like mention below or not
    CALL FUNCTION 'PRICING'
        EXPORTING
          calculation_type = 'B'   
    or  (calculation types = as in condition type)
          comm_head_i      = komk
          comm_item_i      = komp
          preliminary      = ' '
          no_calculation   = ' '
        IMPORTING
          comm_head_e      = komk
          comm_item_e      = komp
        TABLES
          tkomv            = i_komv.
    regards
    Edited by: bvdv on Jul 8, 2009 7:35 PM

  • Partner Functions Mandatory in Header and Item Level

    Hi Guys,
                   I want to Make Some Partner Functions as a Manatory in Header and Item Level,How to make it configure,Please give me
                   the solution.

    hi,
    please go to VOPA and select :
    after configuring the set up PD for customer master.
    then check the second and third ones
    FOR HEADER LEVEL:
    GOTO SPRO - SD - set up partner determinatin procedure- set up PDP for sales document header & select your PARTNER DETERMINATION PROCEDURE & goto partner functions in procedure and SELECT WHICH PARTNERS TO APPEAR AS MANDATORY & CHECK whether they are appearing in document header or not.
    FOR ITEM LEVEL:
    GOTO SPRO - SD - set up partner determinatin procedure- set up PDP for sales document ITEM LEVEL & select your PARTNER DETERMINATION PROCEDURE & goto partner functions in procedure and SELECT WHICH PARTNERS TO APPEAR AS MANDATORY & CHECK whether they are appearing in document item level or not.
    balajia

Maybe you are looking for

  • Unable to sync TX calendar with Outlook 2003 (Windows XP)

    Last week I noticed that random past diary entries were gradually disappearing from my TX with each Hotsync without me changing any settings or receiving any error message. They went 1st from Outlook on my PC but remained on my TX and then all non-re

  • Microsoft Visual C++ Runtime Library Error in T430S during HP printer install

    I just bought a T430S Windows 8 and I'm having problems installing the software and drivers for my HP Photosmart D-110-a printer. I've owned the printer for a year and it was no problem installing the software that it came with on my previous Dell Wi

  • The specified Resource List is invalid while adding memeber to resource lst

    HI team, I am trying add a item to a already exist resource list in Oracle Projects by Using an API with below code but i ma getting an error Single Planning Resource failed!. Error: The specified Resource List is invalid. Please help me in resolving

  • How to collect/organize user requirements?

    Hello everyone, I have been a self taught LV programmer for years now, who never focused much on the UI design process, at the beginning of a big LV project. Now, I am about to embark on a big project, as a team leader, I have started thinking about

  • Sending SAP mail to the workcentre

    Hi Guys, Can i send a SAP mail to the workcentre using the standard FM 'SO_OBJECT_SEND'. Please send me any related documentation or code to achieve the functionality using the above given FM. Thanks, KC.


HashFlare