Table for Time data

Dear experts!
Now, I'm getting some issues.
- The first, when I use transaction code: PTMW. After that, I choose ID time. In tab comment I key my text.
- Second, I try to find table that contain my text, but I don't find.
Really, I want to find table to contain my text.
Help me, please!
Regards Huy!

Thanks experts!
Really, I want to find field that contain comment, but not field contain text to describe for IDs time that is defined with IDs time.
you can find it in using Tcode: PTMW, after that choose IDs time, final choose comment tab.
Help me, please !
Best regards, Huy!

Similar Messages

Error while filling set up tables for 2LIS_11 data sources

hello All ,
I tried to fill setup tables for 2LIS_11 data sources in OLI7BW , but the job RMCVENUA is getting cancelled. below is the Job Log ,
Job started
Step 001 started (program RMCVNEUA, variant &0000000000005, )
Start of order processing
Error determining rate: foreign curr. local curr. INR date 10.09.2008 (doc. 1)
Job cancelled
Is there any setting required in R3 side before filling setup tables of SD ?
I am able to fill the setup tables for 2LIS_05 ( Notifications) successfully.
Regards ,
Amol Kulkarni
Edited by: Amol Kulkarni on Dec 4, 2008 3:59 AM
Edited by: Amol Kulkarni on Dec 4, 2008 4:00 AM

Hi,
one of the sales document currencies is not maintained properly in the system and therefore its failing.
you need to correct those documents before filling the set up tables.
Either you can chose the option fault document toleration limit to 1000...so that 1000 records wrong records can be tolerated or you have to crrect it first before filling up the set up tables.
This will generally happen in test systems.... but very rare in production...so try to maintain currrency again in the system.
generally you will see the sales doc number in the error for which its failing.
May be at the time of filling some óne was working on some sales document and tried it save it.
correct that doc and fill the set up tables again.
Thanks
Ajeet

Tables for Credit data

Hi all,
please tell me the tables for Credit data.
Thanks,
kishore.

1) Check to see if there are any entries in table S066 and S067. These SIS tables hold the credit data for sales order value and delivery order value.
hope it helps

Tables for Contract data

Hi all,
if you know any tables for contract data(For Contract report),
please tell me.....
Thanks,
kishore.

VBAK-contract header
VBAP-contract item
VEDA-changed contracts
KONV-condition records
MARA-material related to contract

Tables for Budget data

Hi,
Please provide the base tables for Budget data
thanks

hi Arun,
check these
BPGE (overall budgets),
BPJA (annual budgets) and
BPPE (period budgets).

The table for storing data for infocube and ODS

Hi all:
could you please tell me how to find the table for storing data for infocube and ODS?
thank you very much!

Hi Jingying Sony,
To find tables for any infoprvider go to SE11.
In database table field enter the following
Cube -
Has fact table and dimension table
For customized cube - ie cube names not starting with ' 0 '
Uncompressed Fact table - /BIC/F<infocubename>
Compressed fact table - /BIC/E<infocubename>
Dimension table - /BIC/D<infocubename>
For standard cube - ie cube names starting with ' 0 '
Uncompressed Fact table - /BI0/F<infocubename>
Compressed fact table - /BI0/E<infocubename>
Dimension table - /BI0/D<infocubename>
Click on display.
For DSO,
For standard DSO active table- /BI0/A<DSO name>00.
You use 40 for new table.
Click on display.
For customized DSO use- /BIC/A<DSO name>00.
An easier way is in the database table field, write the name of the cube/DSO preceeded and followed by ' * ' sign. Then press F4 . It shall give you the names of the available table for that info provider.
Double click on the name and choose display.
Hope this helps,
Best regards,
Sunmit.

Method :Want to Use Z-Table for Accessing Data

Dear All,
I am new to BADI. I have implented one HR-PAYROLL Badi.
In this BADI I am having one method . I want to Use One Z-table for accessing data from
that table . Not able define the table in method.
Kindly tell me how to do it .
Thanking you in Advance
Siladitya

Hello Siladitya
I assume your problem is the definition of an itab for selecting data from your Z-table. In case of classes you have to use table types and workareas, e.g.:
METHOD name_of_interface_method.
DATA:
lt_itab TYPE TABLE OF <name of z-table>,
ls_record TYPE <name of z-table>.
SELECT * FROM <name of z-table> INTO TABLE lt_itab.
LOOP AT lt_itab INTO ls_record.
ENDLOOP.
ENDMETHOD.
Regards
Uwe

Dynamic Internal Table for reading data from external file

Hello All,
The task was to create a internal table with dynamic columns,
Actually this is my first task in the WebAS 6.20, my program is based on input file provided by user with certain effort. this file can have different effort for a one yr to five year frame..
I needed to read the raw data from file, based on months create a internal table to hold the data, after this i need to validate the data...
I have browsed thru dynamic internal table topic, but couldn't find any dynamic appending structure, the dynamic structure would contains 12 month fileds.
can any one help me in getting my task completed..
Thanks
Kumar

Hi,
I see that you posted the same question a couple of days ago at Dynamic Internal Table for reading data from external file Didn't Charles's response address your problem?
Regards

System table for Additional Data - Basic data text (MM03)

Hi
How can I get the system table for stroring data in MM03 in "Additional Data" the "basic data text" ?
Thanks in advance.

Hi,
CALL FUNCTION 'READ_TEXT'
         EXPORTING
            CLIENT                  = SY-MANDT
            ID                      = 'Z610'
            LANGUAGE                = SY-LANGU
            NAME                    = V_TDNAME
            OBJECT                  = 'VBBK'
            ARCHIVE_HANDLE          = 0
         IMPORTING
            HEADER                  = I_TEXT_HEAD
         TABLES
            LINES                   = I_TEXT_LINE
         EXCEPTIONS
            ID                      = 1
            LANGUAGE                = 2
            NAME                    = 3
            NOT_FOUND               = 4
            OBJECT                  = 5
            REFERENCE_CHECK         = 6
            WRONG_ACCESS_TO_ARCHIVE = 7
            OTHERS                  = 8.
Regards,
Bharani

Table for material data tab

HI,
what is the table for material data tab in PO?
Regards,

Data at item level i.e. may be material data, invoice data is stored in EKPO.
Regards,
Sarang

Table for Sales datas assinged to Equip/Floc

Hi
I need a table for Sales datas like sales org,distribution channel,divition,sales office,sales group assigned to equipment master,
Points assured
Thanks
Seenu

hi seenu
yes you are wright the sales organisation, DC,Divison is strored under the ILOA table only , since in equipment its being picked from the view table,you can interrelate with FL and equipment
regards
thyagarajan

TO FIND TABLES FOR MASTER DATA TRANSACTIONS

HI , When we create a customer, the information is updated in structure RF02D and some tables like KNA1 are updated ..
How can we find the tables for master data transactions.?
please reply...
thanks.

Hi,
I entered into the TC : ST05, Activated the trace then I created a customer, then I came back and deactivated trace, then I clicked on display it gave me a list ( yellow color list ) ... Wat do u mean by update methods here ...
Thanks
SK SIDDIQUI

Asset Tables for legacy data takeover

Dear Friends
We've to take assets data from one client to another and hence would be using Legacy assets.
Could you please let me know from which tables / reports i should extract the data related to master & transaction data from the legacy system which is also on SAP.
ANLA - master data and to take those assets which are not deactivated
ANLB
ANLC - asset accumulated APC & dep. And current yr dep
ANLZ - dep terms data
ANEP - asset transaction data for current year acquisitions
I dont have the system in from of me and i hope the above tables are correct.
1. Please let me know if other tables are required?
2. Should the dep area data be posted with remaining useful life & expired life in legacy asset?
Regards
Kapil

Hello Kapil,
I invite you to carefully review the attached SAP notes which should
provide you with the necessart answer:
68802   Legacy data trnsfr: diff.fields n.ready f.input
550176 FAQ note legacy data transfer asset master records
373894 Collective note: introdctn to prblm solutn in FI-AA
Further I also attach the following 6 notes that provide further
informative details regarding legacy transfer, and also some specific
only for legacy transfer during the year:
729164 AS91/AS92: Incorrect ready for input status for prop. values
29706   AS91/92/94: Dep. area fields not ready for input
4206    Net book value input at old data transfer
50607   Depreciation during old assets data takeover
26240   Reconciliation of posted depreciat. after takeover
For further information, please review the information for asset data
transfer in the R/3 Library:
FI-AA - Assets -> Legacy Data Transfer -> Special Considerations for
Asset Data Transfer -> Time of Transfer...
thanks and regards
Ray

Adjusting the SID table for master data infoobject

Hai
Im trying to activate one master data infoobject. But it says the error like below
<b>The SID Table /BI0/SBBP_DELREF must be converted incompatibly with an activation of characteristic 0BBP_DELREF (changes to the key in the table). Table /BI0/SBBP_DELREF contains data. Parts of this data were lost in the conversion</b>.
or
<b>Undo the changes that led to the incompatible conversion (the changes in the key) or delete all data from table /BI0/SBBP_DELREF.</b>
So how can i adjust the SID table for this .
pls tell me
kumar

Hi,
you'll have to delete ALL the master data for this IObj. Therfore you'll have to
delete all data in ALL the IObjs using 0BBP_DELREF (ODS, CUbes and characteristics).
Then activate your IObj. You will go through some step which I explained in the
following thread
Re: Urgent...Company Code lenght has been changed
Extract:
1. Delete 0COMP_CODE master data.
- get objects list using 0COMP_CODE with loaded data: I suggest to delete
master data via AWB (right click the characteristic). If it can't be deleted because
it is used display the deletion log (via AWB or tx SLG1 / RSDMD, MD_DEL).
- delete loaded data for the list above.
This should not be too much since you are in DEV.
2. change 0COMP_CODE length
- change the length to 4;
*- Activate your IObj. You'll get a popup log, validate. Activate despite warning and
errors. You will get An error message, validate.
You should get an horizontal pane with the activation log. Read it for your personal culture but if you don't have time then don't...
- Next the system will prompt to convert the tables: answer YES. The system will ask to schedule the table conv. in the background, go4it.
- next is the SE14 screen for the P table: Hit Activate and adjust (Direct
execution, or in the back as you wish). Answer yes to the mass processing
question and yes (again) for request adjust online. Your table should be converted successfully.
- go back twice from this screen (leaving SE14 tx and return to RSD1). reread the update log if you wish.
- repeat from the *- above... it will perform the very same for all other P tables of IObj using 0COMP_CODE and the 0COMP_CODE S table.
Your IObj is reactivated again. So should your ODS/DSO objects (check activate for example). Cube didn't need to convert tables since the MDID is note posted in any table of a cube.
Please note that once your IObj is in revised version you can perform the same via the menu extras / database table / convert all (see my previous post).
Now you have to evaluate the task. Of course that is a work to fix the mistake.
Depending on when it has be changed it may be worth to restore your DEV sys with a backup (loose work performed from the backup until now).
hope this helps... otherwise, revert.
Olivier.

Why does a digital indicator formatted for time & date add 16 hours to the input?

I wire a digital indicator with a double precision value that is supposed to indicate an elapsed time. But the indicator (formatted for time and date, with the date inactive) always adds 16 hours to the wired input.
This problem occurs even in a simple vi I wrote that only consists only of a constant wired to the indicator.
Using LabView 6.0.2

Labview interprets the number passed into an indicator formatted for date & time as seconds since Jan. 1st 1904. I'm assuming that since you're looking for elapsed time this is not what you're passing in. One thing that I've done is get the elapsed time in seconds and write a routine to convert that into whatever format you want.

Table for Time data

Similar Messages

Maybe you are looking for