Table hrms_bwpa_mtask to activate multitasking for 0EMPLOYEE_ATTR extractor

According to Note 1063469, multitasking capabilities have been added to the 0EMPLOYEE_ATTR extractor to improve performance. The note says activate this multitasking by adding some entries to table hrms_bwpa_mtask. We want to investigate this multitasking capability but there is no table named hrms_bwpa_mtask in any of our ECC 6.0 or NW2004s systems. Is anyone using this capability? If so, can please you tell us where to find table hrms_bwpa_mtask and how to configure it to improve extractor performance? Any help will be greatly appreciated and points will be awarded.

Similar Messages

No inconsistency found for CCLM extractors

Dear colleagues,
I tried to configure scenario "Custom Code Management" and when I performed activities on step 6.2 Activate Extractors I received yellow message:
No inconsistency found for CCLM extractors
If I uncheck CCLM all are OK.
Could you please help me to resolve it?
Thanks a lot,
Alexander

Hi,
As Aneesh said, first Check the table T006 for the record for 'BOX' unit. If it is not there you have to do Replcation of Units from source system.
It does not affect the data existing in datatargets. It simply update the table T006.
Then after also check the table T006 for this record.
With rgds,
Anil Kumar Sharma .P

Table can not activate again after changing

Hi, everybody
For some reason that we create one more field call EKORG(Purchasing organisation) in table LFA1 and made choice for both Key and Initial value. Now, we are going to delete this field and activate table again, system show the following message, please kindly give us a hand and let me know how to solve this issue in more detail. We use T-code: se14 and try to Activate and adjust database that system show the same message as below.
Thanks you All.
<b>Primary key change not permitted for value table LFA1
Message no. AD300
Diagnosis
This table is defined as a check table. For reasons of consistency, changes to the primary key of the table are not allowed.
Procedure
If it is essential that you change the primary key, you must delete the relevant foreign keys. Refer to the where-used list to find all tables containing a field that is checked against this table. Delete the foreign keys for these fields.
If necessary, maintain the deleted foreign keys again.</b>
Message was edited by:
Alfred

Alfred,
If you can't figure this out you should stop what you are doing and get help from someone who knows how to fix this mess. I'll give you a hint, it isn't Programs... And it might be something to do with tables... Once you've got a list of all tables where LFA1 is used you will have to check them 1 by 1 to see if they use LFA1 as a check table.
I'd still love to know what posessed you to mess around with the primary key of a standard SAP table? And I'd also love to know why everyone is giving you help and suggestions on how to activate the table whilst no-one seems to care that you are changing a standard SAP primary key. I can't believe you managed to get an access key to change the table in this way and no-one in your company/client questioned what and why you were doing it!
LFA1 is a pretty important table in the SAP system (Vendor Master table) so to mess around with its primary key is utterly ridiculous.
The only thing you should learn here is that changing SAP standard objects is usually a no-no. Trying to change the primary key on a standard SAP table is a complete no-no. There must have been an alternative to whatever it is you are trying to achieve.
Gareth.

Creating View for an extractor with reference field

Hi All,
         Here is my requirement.
I need to create a DB view for an extractor. I need to join 3 tables : AUFK,AFIK & AFKO.
Table Join Conditions:
AUFK     MANDT     =     AFIH     MANDT
AUFK     MANDT     =     AFKO     MANDT
AUFK     AUFNR     =     AFIH     AUFNR
AUFK     AUFNR     =     AFKO     AUFNR
This AUFK table has a Z field ZZACCOMPLISH(QUAN field) and it it referning to MARA-MEINS.
I created view successfully with all fileds including ZZACCOMPLISH.
But when i give the view name in RSO2, i am getting an error message that 'ZZACCOMPLISH' is refering to some other table.
In this case i don't know how to include MEINS in ths view and There is no link between table AUFK and MARA.
Please guide me on this.
Regards,
Ashok

Could you please share how this was resolved?
I currently have the same requirement/issue.
Many Thanks,

No Data Initialized for Purchasing Extractors (2LIS_02_ITM)

Hello Experts,
We are in R/3 4.6 C PI 2005, I am trying to fill the setup tables for Purchasing Extractors. I tried with different seletions. After executing the T-code OLI3BW, in RSA3 always it is showing 0 Records. Please advice.
Following is the Error message some times I will Get, If I have a selection( Ex PO NUmbers Rage, or Date Range) I wont Get any error message same time it wont display any other message.
=====
ABAP runtime errors    TABLE_INVALID_INDEX
       Occurred on     06/08/2009 at 14:00:13
>> Short dump has not been completely stored. It is too big.
1. "INDEX idx" for specifying the line number in the table
"\PROG=SAPLEINS\DATA=XMCEKET[]"
   where you want to change, insert or delete.
2. "FROM idx" for specifying the start index when deleting a line
   area from or inserting a line area into the table
"\PROG=SAPLEINS\DATA=XMCEKET[]".
3. "TO idx" for specifying the end index when deleting a line
   area from or inserting a line area into the table
"\PROG=SAPLEINS\DATA=XMCEKET[]".
How to correct the error
If the error occurred in one of your own programs or in an SAP program
that you modified, try to correct it yourself.
If the error occurred in a non-modified SAP program, you may be
able to find a solution in the SAP note system.
If you have access to the note system yourself, use the following
search criteria:
"TABLE_INVALID_INDEX"
"SAPLEINS " or "LEINSF2U "
"LIS_VERTEILUNG_LF"
============
Thanks.
Edited by: BPSNEW on Jun 18, 2009 10:38 PM

Hi Krishna:
Please check if SAP Note 1454260 - "BW/LIS: RMCENEUA dump with TABLE_INVALID_INDEX" is applicable to your system.
Regards,
Francisco Milán.

Looking for an extractor.

Hi All. I'm looking for an extractor for the following fields:
COSP-WTG001 to COSP-WTG016
COSP-WOG001 to COSP-WOG016
COSP-WKG001 to COSP-WKG016
Is there an way to trck this down?.
I have already found extractors
0CO_OM_CCA_1
0CO_OM_CCA_2
0CO_OM_CCA_9
These extractors extract some data from COSP table but no the fields I need.
Is there a way to find out if there is any standard extractor for the fields above?
Regards, Mauro.

check the table ROOSFIELD
but i think you'll have to create generic extractor for the same... as all these field are for value in different currency

Infoset Query is not available for generic Extractor

Hi,
I've created an infoset in SAP ECC with sq02. Then I've created an Infoset Query on top of this Infoset, because I wanted to exclude records with specific values. Now I want to use this Infoset Query (with the filter restrictions) in my generic DataSource. I can only chosse the Infoset, but not the InfoSet Query. Normally I use the filter in the InfoPackage, but neither IP nor DTP can exclude values with a pattern (f.e. exclude all record that contains a $ symbol in the string)
Any suggestions?
Thanks and regards,
Sebastian

I agree with Jen, that BW side routines would work just fine.
If it is extractor performance you are worried about and that is why you want to build the $ exclusion in the select, then I would suggest just creating an extractor from scratch using a custom written function module. It's actually very strait forward and provides many advantages over table/view/InfoSet based generic extractors.
I am not a fan of using InfoSets for generic extractors.. but you can create InfoSets based on a data read program in which case you code all the selects and whatnot. But if you go that far with the InfoSet, why not just write the FM...
Thanks

How to find table that store real data for field 'BETRG' ?

1) datasource 0HR_PY_1 include field 'BETRG' in R/3 source system; extract structure HRMS_BIW_PY1 for datasource 0HR_PY_1, however structure is not used for stroing data. Question: how can we find table which store real data for the field 'BETRG'?
2) If I want to add one type call department leader type which already defined in one enhanced HR table, to calculate the total amount using field 'BETRG' according to department leader type. Should I enhance datasource 0HR_PY_1 by adding department leader type or create new view based on enhanced HR table and another table that include 'BETRG' data, also create new datasource based on this view later on?
Thanks!

Hi,
Check this for Payroll Data (Transaction Data) 0HR_PY_1
http://help.sap.com/saphelp_nw70/helpdata/EN/a5/94e8288eec11d4b2fb00010220c65f/frameset.htm
The extractor for payroll results reads data from payroll cluster PCL2, not from standard tables.
thanks,
JituK

How to find table name which provide data for the DataSource

Hi friends,
How to find the Table name which providing data for the Business content DataSources (Master Data). Is there any table or Transation which give datasource and Table name at once.
Thanks&Regards
Revathi

Hi Revathi...........
1)If the datasource is extracting data from any table.................open the datasource using RSO2..........there u will get the table name......
2) If the datasource is extracting data from any view.............go to RSA2..........copy the view name..........go to SE11 >> give the view name >> and check..........
3) If Datasource is Function module based............then u hav to check in RSA2 >> give the datasource name >> execute >> there u will find the Extract structure name......Copy the Extract Structure name >> Go to SE11 >> in the Data Element field give the Extract structure name >> Display >> From the Entry Help/Check tab u can get the Table name............
If u double click on the Extractor..............u will get the Function Module..............from there also u can check that the FM extracting data from which tables............
For Other datasources also...........u can get the structure name from here........
4) If the Datasources r LO datasources............then u can get the table name in LBWE.............LO extractor - goto transaction LBWE.................... Select the maintenance link for your datasource............
here in the right hand pane.........in the drop down box, you can see the structures associated with this extractor ........ just remove the MC for the structure names to get the base table names. e.g. EKKO for MCEKKO.
5) There is a pattern for the Extract structure name for LO datasources.............for an example..........
DataSource 2LIS_11_VAITM ......Extract structure name is MC11VA0ITM
2LIS_11_VAHDR >> MC11VA0HDR
Hope this helps.........
Regards,
Debjani.......

Access af:table values from JavaScript array (for google maps task)

Hi!
I have JSP page with af:table where latitude and longitude for google maps are stored. I am using these tutorial [https://blogs.oracle.com/middleware/entry/integrating_google_maps_with_adf] and I know how to access latitude and longitude from output text (for one point). Now i need to do something similar with loop for all table rows. How can I achieve this?
I have JavaScript code which uses Google Maps API and can display many points on one map. Also I have longitude and latitude data in af:table (bindings), each table row has one point. My task is to take data from af:table and pass it to JavaScript.
May be it is better to use managed bean as you said. Firstly I will access binding data from managed bean. Then I have to pass this data to JavaScript method? Can you suggest some example? I have "Using JavaScript in ADF Faces Rich Client Applications"

My table is there :
<af:table value="#{bindings.LocView1.collectionModel}" var="row"
                              rows="#{bindings.LocView1.rangeSize}"
                              emptyText="#{bindings.LocView1.viewable ? 'No data to display.' : 'Access Denied.'}"
                              fetchSize="#{bindings.LocView1.rangeSize}" rowBandingInterval="0"
                              filterModel="#{bindings.LocView1Query.queryDescriptor}"
                              queryListener="#{bindings.LocView1Query.processQuery}" filterVisible="true" varStatus="vs"
                              selectedRowKeys="#{bindings.LocView1.collectionModel.selectedRow}"
                              selectionListener="#{bindings.LocView1.collectionModel.makeCurrent}" rowSelection="single"
                              id="t1">
                        <af:column sortProperty="#{bindings.LocView1.hints.SoffOffCode.name}" filterable="true"
                                   sortable="true" headerText="#{bindings.LocView1.hints.SoffOffCode.label}" id="c1">
                            <af:outputText value="#{row.SoffOffCode}" clientComponent="true" id="ot1"/>
                        </af:column>
                        <af:column sortProperty="#{bindings.LocView1.hints.SoffCode.name}" filterable="true"
                                   sortable="true" headerText="#{bindings.LocView1.hints.SoffCode.label}" id="c2">
                            <af:outputText value="#{row.SoffCode}" id="ot2"/>
                        </af:column>
                        <af:column sortProperty="#{bindings.LocView1.hints.SoffLat.name}" filterable="true"
                                   sortable="true" headerText="#{bindings.LocView1.hints.SoffLat.label}" id="c3">
                            <af:outputText value="#{row.SoffLat}" clientComponent="true" id="ot3"/>
                        </af:column>
                        <af:column clientComponent="true" sortProperty="#{bindings.LocView1.hints.SoffLng.name}" filterable="true"
                                   sortable="true" headerText="#{bindings.LocView1.hints.SoffLng.label}" id="c4">
                            <af:outputText value="#{row.SoffLng}" clientComponent="true" id="ot4"/>
                        </af:column>
                        <af:column sortProperty="#{bindings.LocView1.hints.SoffZoom.name}" filterable="true"
                                   sortable="true" headerText="#{bindings.LocView1.hints.SoffZoom.label}" id="c5">
                            <af:outputText value="#{row.SoffZoom}" id="ot5"/>
                        </af:column>
                    </af:table>
Javascript code:
alert(document.getElementById("t1"));
Result:
[object HTMLDivElement];
And
alert(document.getElementById("t1").innerHTML);
Result:
<div id="t1::ch" style="overflow: hidden; position: relative; width: 366px;" _afrcolcount="5" class="xzg"><table class="xzi" summary="This table contains column headers corresponding to the data body table below" id="t1::ch::t" style="position:relative;table-layout:fixed;width:525px" cellspacing="0"><tbody><tr><th style="padding:0px;padding-left:5px;width:100px;"></th><th style="padding:0px;padding-left:5px;width:100px;"></th><th style="padding:0px;padding-left:5px;width:100px;"></th><th style="padding:0px;padding-left:5px;width:100px;"></th><th style="padding:0px;padding-left:5px;width:100px;"></th></tr><tr><th _d_index="0" _afrfiltercol="true" class="xzr" align="left" nowrap="nowrap"><span id="t1:_afrFltrc1" class="x1u"><input id="t1:_afrFltrc1::content" name="t1:_afrFltrc1" class="x25" type="text"></span></th><th _d_index="1" _afrfiltercol="true" class="xzr" align="left" nowrap="nowrap"><span id="t1:_afrFltrc2" class="x1u"><input id="t1:_afrFltrc2::content" name="t1:_afrFltrc2" class="x25" type="text"></span></th><th _d_index="2" _afrfiltercol="true" class="xzr" align="left" nowrap="nowrap"><span id="t1:_afrFltrc3" class="x1u"><input id="t1:_afrFltrc3::content" name="t1:_afrFltrc3" class="x25" type="text"></span></th><th _d_index="3" _afrfiltercol="true" class="xzr" align="left" nowrap="nowrap"><span id="t1:_afrFltrc4" class="x1u"><input id="t1:_afrFltrc4::content" name="t1:_afrFltrc4" class="x25" type="text"></span></th><th _d_index="4" _afrfiltercol="true" class="xzr" align="left" nowrap="nowrap"><span id="t1:_afrFltrc5" class="x1u"><input id="t1:_afrFltrc5::content" name="t1:_afrFltrc5" class="x25" type="text"></span></th></tr><tr><th id="t1:c1" _d_index="0" _afrleaf="true" _afrroot="true" class="xzj" align="left"><div style="position:relative; float:right"><table id="t1:c1::afrSI" _afrhoverable="true" style="display:none" class="x104" cellpadding="0" cellspacing="0"><tbody><tr><td _afrsortasc="1"><a tabindex="-1" class="xzm" title="Sort Ascending"></a></td><td _afrsortdesc="1"><a tabindex="-1" class="xzn" title="Sort Descending"></a></td></tr></tbody></table></div><div class="x19p">SoffOffCode</div></th><th id="t1:c2" _d_index="1" _afrleaf="true" _afrroot="true" class="xzj" align="left"><div style="position:relative; float:right"><table id="t1:c2::afrSI" _afrhoverable="true" style="display:none" class="x104" cellpadding="0" cellspacing="0"><tbody><tr><td _afrsortasc="1"><a tabindex="-1" class="xzm" title="Sort Ascending"></a></td><td _afrsortdesc="1"><a tabindex="-1" class="xzn" title="Sort Descending"></a></td></tr></tbody></table></div><div class="x19p">SoffCode</div></th><th id="t1:c3" _d_index="2" _afrleaf="true" _afrroot="true" class="xzj" align="left"><div style="position:relative; float:right"><table id="t1:c3::afrSI" _afrhoverable="true" style="display:none" class="x104" cellpadding="0" cellspacing="0"><tbody><tr><td _afrsortasc="1"><a tabindex="-1" class="xzm" title="Sort Ascending"></a></td><td _afrsortdesc="1"><a tabindex="-1" class="xzn" title="Sort Descending"></a></td></tr></tbody></table></div><div class="x19p">SoffLat</div></th><th id="t1:c4" _d_index="3" _afrleaf="true" _afrroot="true" class="xzj" align="left"><div style="position:relative; float:right"><table id="t1:c4::afrSI" _afrhoverable="true" style="display:none" class="x104" cellpadding="0" cellspacing="0"><tbody><tr><td _afrsortasc="1"><a tabindex="-1" class="xzm" title="Sort Ascending"></a></td><td _afrsortdesc="1"><a tabindex="-1" class="xzn" title="Sort Descending"></a></td></tr></tbody></table></div><div class="x19p">SoffLng</div></th><th id="t1:c5" _d_index="4" _afrleaf="true" _afrroot="true" class="xzj" align="left"><div style="position:relative; float:right"><table id="t1:c5::afrSI" _afrhoverable="true" style="display:none" class="x104" cellpadding="0" cellspacing="0"><tbody><tr><td _afrsortasc="1"><a tabindex="-1" class="xzm" title="Sort Ascending"></a></td><td _afrsortdesc="1"><a tabindex="-1" class="xzn" title="Sort Descending"></a></td></tr></tbody></table></div><div class="x19p">SoffZoom</div></th></tr></tbody></table></div><div id="t1::db" class="xz9" style="position: relative; width: 366px; overflow: hidden; height: 521px; z-index: 1;" _afrcolcount="5"><table class="xza x102" style="table-layout:fixed;position:relative;width:525px;" _totalwidth="525" _selstate="{'0':true}" _rowcount="179" _startrow="0" cellspacing="0"><tbody><tr _afrrk="0" class="xzy p_AFSelected"><td style="width:100px;" class="xzv" nowrap="nowrap"><span id="t1:0:ot1">26</span></td><td style="width:100px;" class="xzv" nowrap="nowrap">01</td><td style="width:100px;" class="xzv" nowrap="nowrap"><span id="t1:0:ot3">47.90782714384932</span></td><td style="width:100px;" class="xzv" nowrap="nowrap"><span id="t1:0:ot4">106.88643654861448</span></td><td style="width:100px;" class="xzv" nowrap="nowrap">15</td></tr><tr _afrrk="1" class="xzy"><td class="xzv" nowrap="nowrap"><span id="t1:1:ot1">26</span></td><td class="xzv" nowrap="nowrap">02</td><td class="xzv" nowrap="nowrap"><span id="t1:1:ot3">47.91542113773543</span></td><td class="xzv" nowrap="nowrap"><span id="t1:1:ot4">106.88540658035276</span></td><td class="xzv" nowrap="nowrap">15</td></tr><tr _afrrk="2" class="xzy"><td class="xzv" nowrap="nowrap"><span id="t1:2:ot1">26</span></td><td class="xzv" nowrap="nowrap">03</td><td class="xzv" nowrap="nowrap"><span id="t1:2:ot3">47.90768330745696</span></td><td class="xzv" nowrap="nowrap"><span id="t1:2:ot4">106.89544877090452</span></td><td class="xzv" nowrap="nowrap">15</td></tr><tr _afrrk="3" class="xzy"><td class="xzv" nowrap="nowrap"><span id="t1:3:ot1">26</span></td><td class="xzv" nowrap="nowrap">04</td><td class="xzv" nowrap="nowrap"><span id="t1:3:ot3">47.90716549312801</span></td><td class="xzv" nowrap="nowrap"><span id="t1:3:ot4">106.86879834213255</span></td><td class="xzv" nowrap="nowrap">14</td></tr><tr _afrrk="4" class="xzy"><td class="xzv" nowrap="nowrap"><span id="t1:4:ot1">26</span></td><td class="xzv" nowrap="nowrap">05</td><td class="xzv" nowrap="nowrap"><span id="t1:4:ot3">47.89841940184846</span></td><td class="xzv" nowrap="nowrap"><span id="t1:4:ot4">106.82674130477903</span></td><td class="xzv" nowrap="nowrap">13</td></tr><tr _afrrk="5" class="xzy"><td class="xzv" nowrap="nowrap"><span id="t1:5:ot1">26</span></td><td class="xzv" nowrap="nowrap">06</td><td class="xzv
.etc
Javascript: alert(document.getElementById("t1:121:ot3").innerHTML); this retrieve in value
But only 50 rows in this result. I have many rows. How I can get all???

Tables related to PM order for actual and commitment items

Hello Experts,
I need help in finding the tables related to PM order for actual and commitment items.
I need develop a report which can show the actual and commitment items for each order and Operation/component under that each ITEM wise and its related documents.
For the component we can find the table RESB.
But i am getting the difficult to find the data related to Operation (services)
In my client we can able to see PM orders with activity types and SKF
How can build the logic to find the values for each operation item and its commitments (PO, PR) and actual that is FI documents
Please guide me the TABLES and fields or else give me the hints, how can find the tables
Thanks and Regards,
Narendra

Hi,
The tables are COEP (actuals) and COOI (commitments); that is if you mean the financial figures.
Regards,
Eli

TS1292 I bought a 4 pack of $25 Itunes gift cards and only 2 will activate. For the second two it just keeps asking for my login. No error message just keeps repeating the login

I bought a 4 pack of $25 Itunes gift cards and only 2 will activate. For the second two it just keeps asking for my login. No error message just keeps repeating the login. Is there any way to fix this or did I just lose $50

Report this here:
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

ARP table not populating mac address for previously reachable IP address

Router has been online and working fine with one BGP neighbor for almost 2 years and no downtime. 2 weeks ago, added a 2nd BGP peer. Everything worked fine for 2 weeks, then all of a sudden yesterday the 2nd BGP peer is disconnected and does not come back. ISP checks and sees everything looks fine on their end. We cannot even ping each other now.
Upon investigation, the ARP table is not even populating the MAC address for the BGP peer IP anymore (same local subnet). Stays "incomplete" in the table no matter what we do, including clearing arp table, changing IP address, etc.
Plug a laptop directly into the 2nd BGP peer FE port and replicate the IP addressing. Laptop cannot ping Router, but Router CAN ping laptop. Check ARP table, but STILL no mac address assigned and now not even the ARP table showing "incomplete".
Thinking it could be the FE interface, switch to the 2nd FE interface and perform same laptop test, this time with arbitrary IP addressing. Now cannot ping each other, no MAC in ARP table.
End up rebooting the router and lo-and-behold, everything is working normally again. 2nd BGP peer peers up instantly.
I should also mention that the 1st BGP peer worked flawlessly throughout, taking all the Internet load and having no issues throughout.
Also, the FE ports for the 2nd BGP peer are on an HWIC FE card plugged into the router. The 1st BGP peer is plugged into the built-in GE interface. 2901 running: c2900-universalk9-mz.SPA.151-4.M4.bin
Lastly, no router resource issues, no error messages, no logs. Just the BGP peer disconnecting.
I have never, in 20 years working with Cisco routers seen something like this before. This is the most fundamental aspect of IP and Ethernet that was not working.
Has anyone ever seen this behavior before??
Here is the router config (IP's changed):
version 15.1
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service internal
service sequence-numbers
boot-start-marker
boot-end-marker
logging buffered 150000
aaa new-model
aaa authentication login LAUTHEN local
aaa authentication login TAUTHEN local group tacacs+ enable
aaa authorization console
aaa authorization exec LAUTHOR local if-authenticated
aaa authorization exec TAUTHOR local group tacacs+ if-authenticated
aaa session-id common
clock timezone PST -8 0
clock summer-time PDT recurring
no ipv6 cef
no ip source-route
ip cef
no ip domain lookup
multilink bundle-name authenticated
username ubiadmin privilege 15 secret 4 .JbeuWXuZvchrG0OL.5BftFtqrrEyxcnVHn5rIuCnTk
username umitsnoc01 privilege 15 secret 4 cUmoRUjey9O1x.wk9S.kleX.iAAhCwihupr6Z98p6OA
redundancy
ip ssh version 2
track 1 interface GigabitEthernet0/0 line-protocol
class-map match-any AutoQoS-VoIP-RTP-Trust
match access-group name SIP-Media-INBOUND
class-map match-any AutoQoS-VoIP-Control-Trust
match ip dscp cs3
match ip dscp af31
class-map match-any Customer-Voice
match access-group name Customer-VPNs
class-map match-any media
match access-group name SIP-Media
class-map match-any signaling
match access-group name SIP-Signaling
policy-map AutoQoS-Policy-Trust
class AutoQoS-VoIP-RTP-Trust
priority percent 70
class AutoQoS-VoIP-Control-Trust
bandwidth percent 5
class class-default
fair-queue
policy-map queue
class signaling
bandwidth percent 5
class media
priority percent 50
class Customer-Voice
priority percent 40
class class-default
fair-queue
policy-map shape
class class-default
shape average 10000000
service-policy queue
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
description BGP Peer 1
ip address 2.2.2.2 255.255.255.252
no ip redirects
ip flow ingress
ip flow egress
duplex auto
speed auto
service-policy output shape
interface GigabitEthernet0/1
description LAN
ip address 1.2.3.4 255.255.255.0
no ip redirects
ip flow ingress
ip flow egress
standby 255 ip 1.2.3.1
standby 255 priority 105
standby 255 preempt
standby 255 mac-address 1a2b.3c4d.5e6f
standby 255 track 1 decrement 10
duplex auto
speed auto
service-policy output AutoQoS-Policy-Trust
interface FastEthernet0/0/0
description BGP Peer 2
ip address 1.1.1.1 255.255.255.252
ip flow ingress
ip flow egress
duplex full
speed 100
service-policy output shape
interface FastEthernet0/0/1
no ip address
shutdown
duplex auto
speed auto
router bgp 7777
bgp router-id 2.2.2.2
bgp log-neighbor-changes
network 1.2.3.0 mask 255.255.255.0
neighbor 1.1.1.2 remote-as 5555
neighbor 1.1.1.2 update-source FastEthernet0/0/0
neighbor 1.1.1.2 prefix-list L3-DEFGW in
neighbor 1.1.1.2 route-map L3-LPREF-IN in
neighbor 2.2.2.1 remote-as 6666
neighbor 2.2.2.1 ebgp-multihop 2
neighbor 2.2.2.1 update-source GigabitEthernet0/0
neighbor 2.2.2.1 send-community
neighbor 2.2.2.1 prefix-list COLO-DEFGW in
neighbor 2.2.2.1 route-map COLO-LPREF-IN in
neighbor 2.2.2.1 route-map COLO-OUT out
ip forward-protocol nd
ip bgp-community new-format
ip as-path access-list 5 permit _5555_
ip as-path access-list 5 deny .*
ip as-path access-list 10 permit ^6666$
no ip http server
no ip http secure-server
ip flow-top-talkers
top 50
sort-by bytes
ip route 0.0.0.0 0.0.0.0 1.1.1.2 254 name L3
ip route 0.0.0.0 0.0.0.0 2.2.2.1 255 name COLO1
ip route 10.0.0.0 255.0.0.0 10.10.10.10 name FW_OUTSIDE
ip tacacs source-interface GigabitEthernet0/1
ip access-list standard SNMP_SOURCES
permit 12.12.12.0 0.0.0.255
deny any log
ip prefix-list L3-DEFGW seq 5 permit 0.0.0.0/0
ip prefix-list COLO-DEFGW seq 5 permit 0.0.0.0/0
ip prefix-list COLO-LPREF-OUT seq 5 permit 1.2.3.0/24
route-map COLO-LPREF-IN permit 5
match as-path 5
set local-preference 250
route-map COLO-LPREF-IN permit 10
set local-preference 150
route-map COLO-LPREF-IN permit 20
route-map COLO-OUT permit 10
match ip address prefix-list COLO-LPREF-OUT
set as-path prepend 7777 7777 7777
set community 29795:1004
route-map COLO-OUT permit 20
route-map L3-LPREF-IN permit 10
match as-path 10
set local-preference 200
route-map L3-LPREF-IN permit 20
set local-preference 150
snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
snmp-server enable traps vrrp
snmp-server enable traps flowmon
snmp-server enable traps transceiver all
snmp-server enable traps ds1
snmp-server enable traps call-home message-send-fail server-fail
snmp-server enable traps tty
snmp-server enable traps license
snmp-server enable traps envmon
snmp-server enable traps ethernet cfm cc mep-up mep-down cross-connect loop config
snmp-server enable traps ethernet cfm crosscheck mep-missing mep-unknown service-up
snmp-server enable traps flash insertion removal
snmp-server enable traps mac-notification
snmp-server enable traps aaa_server
snmp-server enable traps cef resource-failure peer-state-change peer-fib-state-change inconsistency
snmp-server enable traps memory bufferpeak
snmp-server enable traps config-copy
snmp-server enable traps config
snmp-server enable traps config-ctid
snmp-server enable traps event-manager
snmp-server enable traps hsrp
snmp-server enable traps cpu threshold
snmp-server enable traps rsvp
snmp-server enable traps syslog
snmp-server enable traps vtp
snmp-server enable traps ipsla

When you were checking the ARP table was there an entry for Fast0/0/0?
HTH
Rick

Fusion drive solution to activate Office for Mac 2011

Activating Office 2011 is a known issue for Fusion Drive Macs.
Activation is tied to the drive. According to Microsoft the solid state part of the Fusion Drive generates a new disk id every time the Mac is started. So Mac Office thinks it a new system at each startup and will require activation.
This solution was suggested by Microsoft Support. Please let us know if this works for you.
Follow the steps below to remove the “Thunderbolt bridge”:
1. Click on the Apple icon and click on “System Preferences”
2. Click on “Network”
3. Look for “Thunderbolt Bridge” on the left side.
4. Highlight the Bridge and click on the “-” sign to remove it.
5. Restart the computer and enter the Product key for Microsoft Office. Restart again.
You can also leave comments here:
Fusion drive solution to activate Office for Mac 2011

I don't normally advocate users re-install Office to fix an issue but in your case I think it's worth a try. The Mavericks update seems to have fixed the issue for most users. I would suggest the complete removal rather than the simple removal of dragging the Office folder in Applications to the trash.
Office for Mac 2011: Remove Office
http://www.officeformachelp.com/2012/12/office-for-mac-2011-remove-office/

Init without data transfer is not working in the Production box for FICA extractors

Hi Guys,
We are unable to do Init without data transfer for FICA Extractors(0FC_INVDOC_XX) from BODS system. And the job is successfully completed from the BODS end but it is not hitting the source system.. Can any one please let me know how to resolve this issue.
Thanks,
Kovur

Hi,
After triggering your info pack with init without data transfer, are you able to see delta pointer at info pack-->scheduler--> init options source system.
Are getting any error message? if yes then please share here.
Thanks

Table hrms_bwpa_mtask to activate multitasking for 0EMPLOYEE_ATTR extractor

Similar Messages

Maybe you are looking for